You are viewing a plain text version of this content. The canonical link for it is here.
Posted to common-user@hadoop.apache.org by Jim the Standing Bear <st...@gmail.com> on 2007/10/08 20:34:36 UTC
new to hadoop and first question
Hi,
I am new to hadoop, and tried to setup a distributed hadoop system.
But when I tried to run the example job, it stack dumped with the
following exception:
org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
I setup hadoop 0.14.1 on two machines, where one acts as both the name
node and job tracker, while the other one is just a slave
When I set it up on a single machine and ran it standalone, it worked
fine. Please let me know if more information is needed to help
troubleshoot. Thanks!
-- Jim
Re: new to hadoop and first question
Posted by Mohammad Tariq <do...@gmail.com>.
Make sure all the config settings are OK and you have proper dns
resolution. Modify the line "127.0.1.1" in your /etc/hosts file to
"127.0.0.1". And, I completely agree with Vinod sir. 0.14 is ancient now.
HTH
P.S : you can go
here<http://cloudfront.blogspot.in/2012/07/how-to-configure-hadoop.html#.UOwNGZsQSv4>,
in case you still need some help.
Best Regards,
Tariq
+91-9741563634
https://mtariq.jux.com/
On Mon, Jan 7, 2013 at 3:20 PM, Vinod Kumar Vavilapalli <
vinodkv@hortonworks.com> wrote:
> You are pointing your JobClient to the Namenode. Check your
> mapred.job.tracker address and make sure it points to the correct
> JobTracker node.
>
> Also 0.14 is very very old. Please use 1.* releases.
>
> HTH,
> +Vinod
>
>
> On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
>
>> Jim the Standing Bear <st...@...> writes:
>>
>> >
>> > Hi,
>> >
>> > I am new to hadoop, and tried to setup a distributed hadoop system.
>> > But when I tried to run the example job, it stack dumped with the
>> > following exception:
>> >
>> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
>> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>> >
>> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
>> > node and job tracker, while the other one is just a slave
>> >
>> > When I set it up on a single machine and ran it standalone, it worked
>> > fine. Please let me know if more information is needed to help
>> > troubleshoot. Thanks!
>> >
>>
>>
>> Hi,
>>
>> I'm right now facing the same issue(the same protocol error) while
>> setting up
>> hadoop on single standalone machine. Since you were successful on
>> setting it
>> up on standalone machine, please guide me as how to fix it.
>>
>>
>
>
> --
> +Vinod
> Hortonworks Inc.
> http://hortonworks.com/
>
Re: new to hadoop and first question
Posted by Mohammad Tariq <do...@gmail.com>.
Make sure all the config settings are OK and you have proper dns
resolution. Modify the line "127.0.1.1" in your /etc/hosts file to
"127.0.0.1". And, I completely agree with Vinod sir. 0.14 is ancient now.
HTH
P.S : you can go
here<http://cloudfront.blogspot.in/2012/07/how-to-configure-hadoop.html#.UOwNGZsQSv4>,
in case you still need some help.
Best Regards,
Tariq
+91-9741563634
https://mtariq.jux.com/
On Mon, Jan 7, 2013 at 3:20 PM, Vinod Kumar Vavilapalli <
vinodkv@hortonworks.com> wrote:
> You are pointing your JobClient to the Namenode. Check your
> mapred.job.tracker address and make sure it points to the correct
> JobTracker node.
>
> Also 0.14 is very very old. Please use 1.* releases.
>
> HTH,
> +Vinod
>
>
> On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
>
>> Jim the Standing Bear <st...@...> writes:
>>
>> >
>> > Hi,
>> >
>> > I am new to hadoop, and tried to setup a distributed hadoop system.
>> > But when I tried to run the example job, it stack dumped with the
>> > following exception:
>> >
>> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
>> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>> >
>> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
>> > node and job tracker, while the other one is just a slave
>> >
>> > When I set it up on a single machine and ran it standalone, it worked
>> > fine. Please let me know if more information is needed to help
>> > troubleshoot. Thanks!
>> >
>>
>>
>> Hi,
>>
>> I'm right now facing the same issue(the same protocol error) while
>> setting up
>> hadoop on single standalone machine. Since you were successful on
>> setting it
>> up on standalone machine, please guide me as how to fix it.
>>
>>
>
>
> --
> +Vinod
> Hortonworks Inc.
> http://hortonworks.com/
>
Re: new to hadoop and first question
Posted by Mohammad Tariq <do...@gmail.com>.
Make sure all the config settings are OK and you have proper dns
resolution. Modify the line "127.0.1.1" in your /etc/hosts file to
"127.0.0.1". And, I completely agree with Vinod sir. 0.14 is ancient now.
HTH
P.S : you can go
here<http://cloudfront.blogspot.in/2012/07/how-to-configure-hadoop.html#.UOwNGZsQSv4>,
in case you still need some help.
Best Regards,
Tariq
+91-9741563634
https://mtariq.jux.com/
On Mon, Jan 7, 2013 at 3:20 PM, Vinod Kumar Vavilapalli <
vinodkv@hortonworks.com> wrote:
> You are pointing your JobClient to the Namenode. Check your
> mapred.job.tracker address and make sure it points to the correct
> JobTracker node.
>
> Also 0.14 is very very old. Please use 1.* releases.
>
> HTH,
> +Vinod
>
>
> On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
>
>> Jim the Standing Bear <st...@...> writes:
>>
>> >
>> > Hi,
>> >
>> > I am new to hadoop, and tried to setup a distributed hadoop system.
>> > But when I tried to run the example job, it stack dumped with the
>> > following exception:
>> >
>> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
>> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>> >
>> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
>> > node and job tracker, while the other one is just a slave
>> >
>> > When I set it up on a single machine and ran it standalone, it worked
>> > fine. Please let me know if more information is needed to help
>> > troubleshoot. Thanks!
>> >
>>
>>
>> Hi,
>>
>> I'm right now facing the same issue(the same protocol error) while
>> setting up
>> hadoop on single standalone machine. Since you were successful on
>> setting it
>> up on standalone machine, please guide me as how to fix it.
>>
>>
>
>
> --
> +Vinod
> Hortonworks Inc.
> http://hortonworks.com/
>
Re: new to hadoop and first question
Posted by Mohammad Tariq <do...@gmail.com>.
Make sure all the config settings are OK and you have proper dns
resolution. Modify the line "127.0.1.1" in your /etc/hosts file to
"127.0.0.1". And, I completely agree with Vinod sir. 0.14 is ancient now.
HTH
P.S : you can go
here<http://cloudfront.blogspot.in/2012/07/how-to-configure-hadoop.html#.UOwNGZsQSv4>,
in case you still need some help.
Best Regards,
Tariq
+91-9741563634
https://mtariq.jux.com/
On Mon, Jan 7, 2013 at 3:20 PM, Vinod Kumar Vavilapalli <
vinodkv@hortonworks.com> wrote:
> You are pointing your JobClient to the Namenode. Check your
> mapred.job.tracker address and make sure it points to the correct
> JobTracker node.
>
> Also 0.14 is very very old. Please use 1.* releases.
>
> HTH,
> +Vinod
>
>
> On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
>
>> Jim the Standing Bear <st...@...> writes:
>>
>> >
>> > Hi,
>> >
>> > I am new to hadoop, and tried to setup a distributed hadoop system.
>> > But when I tried to run the example job, it stack dumped with the
>> > following exception:
>> >
>> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
>> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>> >
>> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
>> > node and job tracker, while the other one is just a slave
>> >
>> > When I set it up on a single machine and ran it standalone, it worked
>> > fine. Please let me know if more information is needed to help
>> > troubleshoot. Thanks!
>> >
>>
>>
>> Hi,
>>
>> I'm right now facing the same issue(the same protocol error) while
>> setting up
>> hadoop on single standalone machine. Since you were successful on
>> setting it
>> up on standalone machine, please guide me as how to fix it.
>>
>>
>
>
> --
> +Vinod
> Hortonworks Inc.
> http://hortonworks.com/
>
Re: new to hadoop and first question
Posted by Vinod Kumar Vavilapalli <vi...@hortonworks.com>.
You are pointing your JobClient to the Namenode. Check your
mapred.job.tracker address and make sure it points to the correct
JobTracker node.
Also 0.14 is very very old. Please use 1.* releases.
HTH,
+Vinod
On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
--
+Vinod
Hortonworks Inc.
http://hortonworks.com/
Re: new to hadoop and first question
Posted by Jagat Singh <ja...@gmail.com>.
Can you please post your conf files
On Mon, Jan 7, 2013 at 8:11 PM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
Re: new to hadoop and first question
Posted by Jagat Singh <ja...@gmail.com>.
Can you please post your conf files
On Mon, Jan 7, 2013 at 8:11 PM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
Re: new to hadoop and first question
Posted by Jagat Singh <ja...@gmail.com>.
Can you please post your conf files
On Mon, Jan 7, 2013 at 8:11 PM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
Re: new to hadoop and first question
Posted by Vinod Kumar Vavilapalli <vi...@hortonworks.com>.
You are pointing your JobClient to the Namenode. Check your
mapred.job.tracker address and make sure it points to the correct
JobTracker node.
Also 0.14 is very very old. Please use 1.* releases.
HTH,
+Vinod
On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
--
+Vinod
Hortonworks Inc.
http://hortonworks.com/
Re: new to hadoop and first question
Posted by Vinod Kumar Vavilapalli <vi...@hortonworks.com>.
You are pointing your JobClient to the Namenode. Check your
mapred.job.tracker address and make sure it points to the correct
JobTracker node.
Also 0.14 is very very old. Please use 1.* releases.
HTH,
+Vinod
On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
--
+Vinod
Hortonworks Inc.
http://hortonworks.com/
Re: new to hadoop and first question
Posted by Vinod Kumar Vavilapalli <vi...@hortonworks.com>.
You are pointing your JobClient to the Namenode. Check your
mapred.job.tracker address and make sure it points to the correct
JobTracker node.
Also 0.14 is very very old. Please use 1.* releases.
HTH,
+Vinod
On Mon, Jan 7, 2013 at 1:11 AM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
--
+Vinod
Hortonworks Inc.
http://hortonworks.com/
Re: new to hadoop and first question
Posted by Jagat Singh <ja...@gmail.com>.
Can you please post your conf files
On Mon, Jan 7, 2013 at 8:11 PM, Prabu <gi...@gmail.com> wrote:
> Jim the Standing Bear <st...@...> writes:
>
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
>
>
> Hi,
>
> I'm right now facing the same issue(the same protocol error) while setting
> up
> hadoop on single standalone machine. Since you were successful on setting
> it
> up on standalone machine, please guide me as how to fix it.
>
>
Re: new to hadoop and first question
Posted by Prabu <gi...@gmail.com>.
Jim the Standing Bear <st...@...> writes:
>
> Hi,
>
> I am new to hadoop, and tried to setup a distributed hadoop system.
> But when I tried to run the example job, it stack dumped with the
> following exception:
>
> org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>
> I setup hadoop 0.14.1 on two machines, where one acts as both the name
> node and job tracker, while the other one is just a slave
>
> When I set it up on a single machine and ran it standalone, it worked
> fine. Please let me know if more information is needed to help
> troubleshoot. Thanks!
>
Hi,
I'm right now facing the same issue(the same protocol error) while setting up
hadoop on single standalone machine. Since you were successful on setting it
up on standalone machine, please guide me as how to fix it.
Re: new to hadoop and first question
Posted by Michael Bieniosek <mi...@powerset.com>.
It looks like you are treating a jobtracker as a namenode. Make sure fs.default.name is set to a namenode's address. By default, namenodes run on port 10000, while jobtrackers run on port 10001.
-Michael
On 10/8/07 5:47 PM, "Jim the Standing Bear" <st...@gmail.com> wrote:
Hi Khalil,
Yes, SSH connection between the two machines works fine.
-- Jim
On 10/8/07, Khalil Honsali <k....@gmail.com> wrote:
> Have you verified connection between the two machines regardless of Hadoop
> (ping, ssh, iptables...etc) ?
>
>
> On 09/10/2007, Jim the Standing Bear <st...@gmail.com> wrote:
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
> > -- Jim
> >
>
>
>
> --
> ---------------------------------------------------------
> Honsali Khalil − 本査理 カリル
> Academic>Japan>NIT>Grad. Sc. Eng.>Dept. CS>Hiroshi&Tsumura Lab.
> http://www.matlab.nitech.ac.jp/~k-hon/
> +81 (zero-)eight-zero 5134 8119
> k.honsali@ezweb.ne.jp (instant reply mail)
>
--
--------------------------------------
Standing Bear Has Spoken
--------------------------------------
Re: new to hadoop and first question
Posted by Jim the Standing Bear <st...@gmail.com>.
Hi Khalil,
Yes, SSH connection between the two machines works fine.
-- Jim
On 10/8/07, Khalil Honsali <k....@gmail.com> wrote:
> Have you verified connection between the two machines regardless of Hadoop
> (ping, ssh, iptables...etc) ?
>
>
> On 09/10/2007, Jim the Standing Bear <st...@gmail.com> wrote:
> >
> > Hi,
> >
> > I am new to hadoop, and tried to setup a distributed hadoop system.
> > But when I tried to run the example job, it stack dumped with the
> > following exception:
> >
> > org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> > protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
> >
> > I setup hadoop 0.14.1 on two machines, where one acts as both the name
> > node and job tracker, while the other one is just a slave
> >
> > When I set it up on a single machine and ran it standalone, it worked
> > fine. Please let me know if more information is needed to help
> > troubleshoot. Thanks!
> >
> > -- Jim
> >
>
>
>
> --
> ---------------------------------------------------------
> Honsali Khalil − 本査理 カリル
> Academic>Japan>NIT>Grad. Sc. Eng.>Dept. CS>Hiroshi&Tsumura Lab.
> http://www.matlab.nitech.ac.jp/~k-hon/
> +81 (zero-)eight-zero 5134 8119
> k.honsali@ezweb.ne.jp (instant reply mail)
>
--
--------------------------------------
Standing Bear Has Spoken
--------------------------------------
Re: new to hadoop and first question
Posted by Khalil Honsali <k....@gmail.com>.
Have you verified connection between the two machines regardless of Hadoop
(ping, ssh, iptables...etc) ?
On 09/10/2007, Jim the Standing Bear <st...@gmail.com> wrote:
>
> Hi,
>
> I am new to hadoop, and tried to setup a distributed hadoop system.
> But when I tried to run the example job, it stack dumped with the
> following exception:
>
> org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>
> I setup hadoop 0.14.1 on two machines, where one acts as both the name
> node and job tracker, while the other one is just a slave
>
> When I set it up on a single machine and ran it standalone, it worked
> fine. Please let me know if more information is needed to help
> troubleshoot. Thanks!
>
> -- Jim
>
--
---------------------------------------------------------
Honsali Khalil − 本査理 カリル
Academic>Japan>NIT>Grad. Sc. Eng.>Dept. CS>Hiroshi&Tsumura Lab.
http://www.matlab.nitech.ac.jp/~k-hon/
+81 (zero-)eight-zero 5134 8119
k.honsali@ezweb.ne.jp (instant reply mail)
Re: new to hadoop and first question
Posted by Prabu <gi...@gmail.com>.
Jim the Standing Bear <st...@...> writes:
>
> Hi,
>
> I am new to hadoop, and tried to setup a distributed hadoop system.
> But when I tried to run the example job, it stack dumped with the
> following exception:
>
> org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>
> I setup hadoop 0.14.1 on two machines, where one acts as both the name
> node and job tracker, while the other one is just a slave
>
> When I set it up on a single machine and ran it standalone, it worked
> fine. Please let me know if more information is needed to help
> troubleshoot. Thanks!
>
Hi,
I'm right now facing the same issue(the same protocol error) while setting up
hadoop on single standalone machine. Since you were successful on setting it
up on standalone machine, please guide me as how to fix it.
Re: new to hadoop and first question
Posted by Prabu <gi...@gmail.com>.
Jim the Standing Bear <st...@...> writes:
>
> Hi,
>
> I am new to hadoop, and tried to setup a distributed hadoop system.
> But when I tried to run the example job, it stack dumped with the
> following exception:
>
> org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>
> I setup hadoop 0.14.1 on two machines, where one acts as both the name
> node and job tracker, while the other one is just a slave
>
> When I set it up on a single machine and ran it standalone, it worked
> fine. Please let me know if more information is needed to help
> troubleshoot. Thanks!
>
Hi,
I'm right now facing the same issue(the same protocol error) while setting up
hadoop on single standalone machine. Since you were successful on setting it
up on standalone machine, please guide me as how to fix it.
Re: new to hadoop and first question
Posted by Prabu <gi...@gmail.com>.
Jim the Standing Bear <st...@...> writes:
>
> Hi,
>
> I am new to hadoop, and tried to setup a distributed hadoop system.
> But when I tried to run the example job, it stack dumped with the
> following exception:
>
> org.apache.hadoop.ipc.RemoteException: java.io.IOException: Unknown
> protocol to name node: org.apache.hadoop.mapred.JobSubmissionProtocol
>
> I setup hadoop 0.14.1 on two machines, where one acts as both the name
> node and job tracker, while the other one is just a slave
>
> When I set it up on a single machine and ran it standalone, it worked
> fine. Please let me know if more information is needed to help
> troubleshoot. Thanks!
>
Hi,
I'm right now facing the same issue(the same protocol error) while setting up
hadoop on single standalone machine. Since you were successful on setting it
up on standalone machine, please guide me as how to fix it.