You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by GitBox <gi...@apache.org> on 2018/12/12 08:59:20 UTC
[GitHub] michal-narajowski opened a new issue #269: GAP: Analyze and fix
failing testcases when using AutoPTS
michal-narajowski opened a new issue #269: GAP: Analyze and fix failing testcases when using AutoPTS
URL: https://github.com/apache/mynewt-nimble/issues/269
This is a general issue that groups all issues with GAP testcases when using AutoPTS. AutoPTS for Nimble is still work in process.
Test Case | Result |
-- | -- | --
GAP/CONN/UCON/BV-06-C | BTP ERROR | Verify the IUT in the Undirected Connectable Mode using Resolvable Private Address can connect with another device performing the General Connection Establishment Procedure.
GAP/IDLE/NAMP/BV-01-C | BTP TIMEOUT | Verify the IUT can perform the Name Discovery Procedure and retrieve the device name from a peer device.
GAP/BROB/BCST/BV-03-C | INCONC | Verify the IUT in Broadcast Mode using a resolvable private address.
GAP/CONN/CPUP/BV-02-C | INCONC | Verify the IUT can perform the Connection Parameter Update Procedure using valid parameters for the peer device; the peer device fails to respond in a timely manner.
GAP/CONN/CPUP/BV-03-C | INCONC | Verify the IUT can perform the Connection Parameter Update Procedure using invalid parameters for the peer device; the peer device accepts the updated connection parameters.
GAP/BOND/BON/BV-01-C | PTS TIMEOUT | Verify that the IUT can properly initiate bonding procedure and store bonding information after pairing while in bondable mode as peripheral role.
GAP/BOND/BON/BV-03-C | PTS TIMEOUT | Verify that the IUT can properly response to bonding and store bonding information after pairing while in bondable mode as peripheral role.
GAP/BOND/BON/BV-04-C | PTS TIMEOUT | Verify that the IUT can properly respond to bonding and store bonding information after pairing while in bondable mode as central role.
GAP/BOND/NBON/BV-03-C | PTS TIMEOUT | Verify that the IUT does not exchange or store bonding information after pairing while in non-bondable mode.
GAP/CONN/CPUP/BV-01-C | PTS TIMEOUT | Verify the IUT can perform the Connection Parameter Update Procedure using valid parameters for the peer device; the peer device accepts the updated connection parameters.
GAP/CONN/PRDA/BV-01-C | PTS TIMEOUT | Verify that the IUT can properly respond to connections after bonding when Private Random Addresses are used by the Lower Tester.
GAP/GAT/BV-01-C | PTS TIMEOUT | Verify that the IUT had all the mandatory GAP characteristics.
GAP/IDLE/NAMP/BV-02-C | PTS TIMEOUT | Verify the IUT can support the Name Discovery Procedure and allow a peer device to retrieve the device name.
GAP/PRIV/CONN/BV-10-C | PTS TIMEOUT | Verify the IUT in the Undirected Connectable Mode supporting the Privacy feature can connect with another device performing the General Connection Establishment Procedure. The IUT is operating in the Peripheral role.
GAP/SEC/AUT/BV-11-C | PTS TIMEOUT | Verify that the IUT properly rejects the service request when there is no sufficient bonding and then completes service correctly with Lower Tester as central role.
GAP/SEC/AUT/BV-12-C | PTS TIMEOUT | Verify that the IUT properly rejects the service request when there is no sufficient bonding and then completes service correctly with Lower Tester as peripheral role.
GAP/SEC/AUT/BV-13-C | PTS TIMEOUT | Verify that the IUT properly rejects the service request when there is insufficient authentication and then completes service correctly with Lower Tester as peripheral role.
GAP/SEC/AUT/BV-14-C | PTS TIMEOUT | Verify that the IUT properly rejects the service request when there is insufficient authentication and then completes service correctly with Lower Tester as peripheral role.
GAP/SEC/AUT/BV-17-C | PTS TIMEOUT | Verify that the IUT can pair with a device who's I/O capabilities do not allow an authenticated pairing, after a service request has been denied with the error response "Insufficient Authentication".
GAP/SEC/AUT/BV-18-C | PTS TIMEOUT | Verify that the IUT can pair with a device who's I/O capabilities do not allow an authenticated pairing, after a service request has been denied with the error response "Insufficient Authentication".
GAP/SEC/AUT/BV-20-C | PTS TIMEOUT | Verify that the IUT when bonded with a peer device tests the bond when receiving the error response "Insufficient Authentication", if link is unencrypted, before eventually removing the bond to perform a new pairing.
GAP/SEC/AUT/BV-21-C | PTS TIMEOUT | Verify that the IUT will inform the upper layer about a lost bond, if the link is refused to be in encrypted with the LTK distributed during the prior pairing procedure.
GAP/SEC/AUT/BV-22-C | PTS TIMEOUT | Verify that the IUT will inform the upper layer about a lost bond, if the peer refuses to encrypt the link with the LTK distributed during the prior pairing procedure.
GAP/SEC/AUT/BV-23-C | PTS TIMEOUT | Verify that the IUT properly rejects the service request when the required pairing has occurred and encryption is required (LE security mode 1) but encryption is not enabled and then completes service correctly with Lower Tester as central role.
GAP/SEC/AUT/BV-24-C | PTS TIMEOUT | Verify that the IUT properly rejects the service request when the required pairing has occurred and encryption is required (LE security mode 1) but encryption is not enabled and then completes service correctly with Lower Tester as peripheral role.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
With regards,
Apache Git Services