You are viewing a plain text version of this content. The canonical link for it is here.
Posted to server-user@james.apache.org by Mike Danifo <md...@mindspring.com> on 2003/02/13 04:35:43 UTC
problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail.
I have 2 accounts: user1 and user2.
I can send mail with both accounts with no problems.
I can also receive mail for user1 with no problems.
When I attempt to receive mail for user2 using microsoft outlook, I get
the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files.
I tried different email clients with no success.
Any help would be appreciated.
Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
R: problems receiving mail
Posted by Davide Frigerio <da...@wise-lab.it>.
I have a question about this problem: is this a kind of incompatibility
beetwen James and Norton, or not?
Thanks.
Davide.
-----Messaggio originale-----
Da: Mike Danifo [mailto:mdanifo@mindspring.com]
Inviato: giovedi 20 febbraio 2003 15.07
A: 'James Users List'
Oggetto: RE: problems receiving mail
Yes, that checkbox is check by default.
thanks.
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Thursday, February 20, 2003 2:27 AM
To: James Users List
Subject: RE: problems receiving mail
Mike,
If you go to Options and Internet E-mail, you should get an E-mail
Scanning pane, and there is a "Protect Against Timeouts" checkbox. Did
you try that?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 2:00
To: 'James Users List'
Subject: RE: problems receiving mail
its norton antivirus 2002
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Thursday, February 13, 2003 1:30 AM
To: James Users List
Subject: RE: problems receiving mail
Mike,
Oh? That's a good tip to know! Which anti-virus software? I'd like to
get that into the documentation for troubleshooting.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 0:38
To: 'James Users List'
Subject: RE: problems receiving mail
Noel-
thanks for pointing out the large attachment
I was foolish by not disabling my anti virus software automatic email
scanning I disabled it, and I could receive the file
thanks for the tip on the environment.xml - that was key
and thanks to the james developers by making james easy to configure and
understand
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 11:58 PM
To: James Users List
Subject: RE: problems receiving mail
Interesting ... you have a 5MB message in the mailbox. Not that such a
large message should cause a problem, it is worth noting.
What type of mailbox? JDBC or file? Any exceptions turning up in any
of the other logs?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 23:03
To: 'James Users List'
Subject: RE: problems receiving mail
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results. The
debug log file shows the below messages for both programs. A windows
reboot did not solve the problem. Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21 12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:01:32
DEBUG pop3server: Watchdog default Worker #21 is exiting run(). 12/02/03
23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool 12/02/03 23:02:55
INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000 12/02/03 23:02:55 DEBUG pop3server: Command received:
USER mike 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: STAT 12/02/03 23:02:55
DEBUG pop3server: Sent: +OK 1 5509706 12/02/03 23:02:55 DEBUG
pop3server: Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG
pop3server: Command received: UIDL 12/02/03 23:02:55 DEBUG pop3server:
Sent: +OK unique-id listing follows 12/02/03 23:02:55 DEBUG pop3server:
Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG pop3server:
Command received: LIST 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1
5509706 12/02/03 23:02:55 DEBUG pop3server: Calling reset() default
Worker #23 12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23 12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:03:00
DEBUG pop3server: Watchdog default Worker #23 is exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by Mike Danifo <md...@mindspring.com>.
Yes, that checkbox is check by default.
thanks.
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Thursday, February 20, 2003 2:27 AM
To: James Users List
Subject: RE: problems receiving mail
Mike,
If you go to Options and Internet E-mail, you should get an E-mail
Scanning pane, and there is a "Protect Against Timeouts" checkbox. Did
you try that?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 2:00
To: 'James Users List'
Subject: RE: problems receiving mail
its norton antivirus 2002
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Thursday, February 13, 2003 1:30 AM
To: James Users List
Subject: RE: problems receiving mail
Mike,
Oh? That's a good tip to know! Which anti-virus software? I'd like to
get that into the documentation for troubleshooting.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 0:38
To: 'James Users List'
Subject: RE: problems receiving mail
Noel-
thanks for pointing out the large attachment
I was foolish by not disabling my anti virus software automatic email
scanning I disabled it, and I could receive the file
thanks for the tip on the environment.xml - that was key
and thanks to the james developers by making james easy to configure and
understand
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 11:58 PM
To: James Users List
Subject: RE: problems receiving mail
Interesting ... you have a 5MB message in the mailbox. Not that such a
large message should cause a problem, it is worth noting.
What type of mailbox? JDBC or file? Any exceptions turning up in any
of the other logs?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 23:03
To: 'James Users List'
Subject: RE: problems receiving mail
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results. The
debug log file shows the below messages for both programs. A windows
reboot did not solve the problem. Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21 12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:01:32
DEBUG pop3server: Watchdog default Worker #21 is exiting run(). 12/02/03
23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool 12/02/03 23:02:55
INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000 12/02/03 23:02:55 DEBUG pop3server: Command received:
USER mike 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: STAT 12/02/03 23:02:55
DEBUG pop3server: Sent: +OK 1 5509706 12/02/03 23:02:55 DEBUG
pop3server: Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG
pop3server: Command received: UIDL 12/02/03 23:02:55 DEBUG pop3server:
Sent: +OK unique-id listing follows 12/02/03 23:02:55 DEBUG pop3server:
Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG pop3server:
Command received: LIST 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1
5509706 12/02/03 23:02:55 DEBUG pop3server: Calling reset() default
Worker #23 12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23 12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:03:00
DEBUG pop3server: Watchdog default Worker #23 is exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by "Noel J. Bergman" <no...@devtech.com>.
Mike,
If you go to Options and Internet E-mail, you should get an E-mail Scanning
pane, and there is a "Protect Against Timeouts" checkbox. Did you try that?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 2:00
To: 'James Users List'
Subject: RE: problems receiving mail
its norton antivirus 2002
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Thursday, February 13, 2003 1:30 AM
To: James Users List
Subject: RE: problems receiving mail
Mike,
Oh? That's a good tip to know! Which anti-virus software? I'd like to
get that into the documentation for troubleshooting.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 0:38
To: 'James Users List'
Subject: RE: problems receiving mail
Noel-
thanks for pointing out the large attachment
I was foolish by not disabling my anti virus software automatic email
scanning I disabled it, and I could receive the file
thanks for the tip on the environment.xml - that was key
and thanks to the james developers by making james easy to configure and
understand
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 11:58 PM
To: James Users List
Subject: RE: problems receiving mail
Interesting ... you have a 5MB message in the mailbox. Not that such a
large message should cause a problem, it is worth noting.
What type of mailbox? JDBC or file? Any exceptions turning up in any
of the other logs?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 23:03
To: 'James Users List'
Subject: RE: problems receiving mail
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results. The
debug log file shows the below messages for both programs. A windows
reboot did not solve the problem. Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21 12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:01:32
DEBUG pop3server: Watchdog default Worker #21 is exiting run(). 12/02/03
23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool 12/02/03 23:02:55
INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000 12/02/03 23:02:55 DEBUG pop3server: Command received:
USER mike 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: STAT 12/02/03 23:02:55
DEBUG pop3server: Sent: +OK 1 5509706 12/02/03 23:02:55 DEBUG
pop3server: Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG
pop3server: Command received: UIDL 12/02/03 23:02:55 DEBUG pop3server:
Sent: +OK unique-id listing follows 12/02/03 23:02:55 DEBUG pop3server:
Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG pop3server:
Command received: LIST 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1
5509706 12/02/03 23:02:55 DEBUG pop3server: Calling reset() default
Worker #23 12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23 12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:03:00
DEBUG pop3server: Watchdog default Worker #23 is exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by Mike Danifo <md...@mindspring.com>.
its norton antivirus 2002
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Thursday, February 13, 2003 1:30 AM
To: James Users List
Subject: RE: problems receiving mail
Mike,
Oh? That's a good tip to know! Which anti-virus software? I'd like to
get that into the documentation for troubleshooting.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 0:38
To: 'James Users List'
Subject: RE: problems receiving mail
Noel-
thanks for pointing out the large attachment
I was foolish by not disabling my anti virus software automatic email
scanning I disabled it, and I could receive the file
thanks for the tip on the environment.xml - that was key
and thanks to the james developers by making james easy to configure and
understand
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 11:58 PM
To: James Users List
Subject: RE: problems receiving mail
Interesting ... you have a 5MB message in the mailbox. Not that such a
large message should cause a problem, it is worth noting.
What type of mailbox? JDBC or file? Any exceptions turning up in any
of the other logs?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 23:03
To: 'James Users List'
Subject: RE: problems receiving mail
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results. The
debug log file shows the below messages for both programs. A windows
reboot did not solve the problem. Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21 12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:01:32
DEBUG pop3server: Watchdog default Worker #21 is exiting run(). 12/02/03
23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool 12/02/03 23:02:55
INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000 12/02/03 23:02:55 DEBUG pop3server: Command received:
USER mike 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: STAT 12/02/03 23:02:55
DEBUG pop3server: Sent: +OK 1 5509706 12/02/03 23:02:55 DEBUG
pop3server: Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG
pop3server: Command received: UIDL 12/02/03 23:02:55 DEBUG pop3server:
Sent: +OK unique-id listing follows 12/02/03 23:02:55 DEBUG pop3server:
Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG pop3server:
Command received: LIST 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1
5509706 12/02/03 23:02:55 DEBUG pop3server: Calling reset() default
Worker #23 12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23 12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:03:00
DEBUG pop3server: Watchdog default Worker #23 is exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by "Noel J. Bergman" <no...@devtech.com>.
Mike,
Oh? That's a good tip to know! Which anti-virus software? I'd like to get
that into the documentation for troubleshooting.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Thursday, February 13, 2003 0:38
To: 'James Users List'
Subject: RE: problems receiving mail
Noel-
thanks for pointing out the large attachment
I was foolish by not disabling my anti virus software automatic email
scanning
I disabled it, and I could receive the file
thanks for the tip on the environment.xml - that was key
and thanks to the james developers by making james easy to configure and
understand
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 11:58 PM
To: James Users List
Subject: RE: problems receiving mail
Interesting ... you have a 5MB message in the mailbox. Not that such a
large message should cause a problem, it is worth noting.
What type of mailbox? JDBC or file? Any exceptions turning up in any
of the other logs?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 23:03
To: 'James Users List'
Subject: RE: problems receiving mail
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results. The
debug log file shows the below messages for both programs. A windows
reboot did not solve the problem. Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21 12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:01:32
DEBUG pop3server: Watchdog default Worker #21 is exiting run(). 12/02/03
23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool 12/02/03 23:02:55
INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000 12/02/03 23:02:55 DEBUG pop3server: Command received:
USER mike 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: STAT 12/02/03 23:02:55
DEBUG pop3server: Sent: +OK 1 5509706 12/02/03 23:02:55 DEBUG
pop3server: Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG
pop3server: Command received: UIDL 12/02/03 23:02:55 DEBUG pop3server:
Sent: +OK unique-id listing follows 12/02/03 23:02:55 DEBUG pop3server:
Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG pop3server:
Command received: LIST 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1
5509706 12/02/03 23:02:55 DEBUG pop3server: Calling reset() default
Worker #23 12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23 12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:03:00
DEBUG pop3server: Watchdog default Worker #23 is exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by Mike Danifo <md...@mindspring.com>.
Noel-
thanks for pointing out the large attachment
I was foolish by not disabling my anti virus software automatic email
scanning
I disabled it, and I could receive the file
thanks for the tip on the environment.xml - that was key
and thanks to the james developers by making james easy to configure and
understand
-Mike
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 11:58 PM
To: James Users List
Subject: RE: problems receiving mail
Interesting ... you have a 5MB message in the mailbox. Not that such a
large message should cause a problem, it is worth noting.
What type of mailbox? JDBC or file? Any exceptions turning up in any
of the other logs?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 23:03
To: 'James Users List'
Subject: RE: problems receiving mail
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results. The
debug log file shows the below messages for both programs. A windows
reboot did not solve the problem. Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21 12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:01:32
DEBUG pop3server: Watchdog default Worker #21 is exiting run(). 12/02/03
23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool 12/02/03 23:02:55
INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000 12/02/03 23:02:55 DEBUG pop3server: Command received:
USER mike 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Command received: STAT 12/02/03 23:02:55
DEBUG pop3server: Sent: +OK 1 5509706 12/02/03 23:02:55 DEBUG
pop3server: Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG
pop3server: Command received: UIDL 12/02/03 23:02:55 DEBUG pop3server:
Sent: +OK unique-id listing follows 12/02/03 23:02:55 DEBUG pop3server:
Calling reset() default Worker #23 12/02/03 23:02:55 DEBUG pop3server:
Command received: LIST 12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1
5509706 12/02/03 23:02:55 DEBUG pop3server: Calling reset() default
Worker #23 12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:55 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:02:56 DEBUG pop3server: Calling reset() default Worker #23 12/02/03
23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23 12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool 12/02/03 23:03:00
DEBUG pop3server: Watchdog default Worker #23 is exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by "Noel J. Bergman" <no...@devtech.com>.
Interesting ... you have a 5MB message in the mailbox. Not that such a
large message should cause a problem, it is worth noting.
What type of mailbox? JDBC or file? Any exceptions turning up in any of
the other logs?
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 23:03
To: 'James Users List'
Subject: RE: problems receiving mail
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results.
The debug log file shows the below messages for both programs.
A windows reboot did not solve the problem.
Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21
12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool
12/02/03 23:01:32 DEBUG pop3server: Watchdog default Worker #21 is
exiting run().
12/02/03 23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool
12/02/03 23:02:55 INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000
12/02/03 23:02:55 DEBUG pop3server: Command received: USER mike
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: STAT
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1 5509706
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: UIDL
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK unique-id listing follows
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: LIST
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1 5509706
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23
12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool
12/02/03 23:03:00 DEBUG pop3server: Watchdog default Worker #23 is
exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by Mike Danifo <md...@mindspring.com>.
Thanks for the quick response Noel.
I have tried both outlook and eudora, and I get similar results.
The debug log file shows the below messages for both programs.
A windows reboot did not solve the problem.
Any idea what is happening?
12/02/03 23:01:32 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:01:32 DEBUG pop3server: Calling disposeWatchdog() default
Worker #21
12/02/03 23:01:32 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool
12/02/03 23:01:32 DEBUG pop3server: Watchdog default Worker #21 is
exiting run().
12/02/03 23:02:54 DEBUG pop3server: Retrieving a
org.apache.james.pop3server.POP3Handler from the pool
12/02/03 23:02:55 INFO pop3server: Connection from 192.168.1.1
(192.168.1.1)
12/02/03 23:02:55 DEBUG pop3server: Calling start()
12/02/03 23:02:55 DEBUG pop3server: Watchdog default Worker #23 has time
to sleep 120000
12/02/03 23:02:55 DEBUG pop3server: Command received: USER mike
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: PASS <password
omitted>
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Welcome mike
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: STAT
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1 5509706
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: UIDL
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK unique-id listing follows
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: LIST
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK 1 5509706
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Command received: RETR 1
12/02/03 23:02:55 DEBUG pop3server: Sent: +OK Message follows
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:55 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:02:56 DEBUG pop3server: Calling reset() default Worker #23
12/02/03 23:03:00 INFO pop3server: Connection for mike from 192.168.1.1
(192.168.1.1) closed.
12/02/03 23:03:00 DEBUG pop3server: Calling disposeWatchdog() default
Worker #23
12/02/03 23:03:00 DEBUG pop3server: Returning a
org.apache.james.pop3server.POP3Handler to the pool
12/02/03 23:03:00 DEBUG pop3server: Watchdog default Worker #23 is
exiting run().
-----Original Message-----
From: Noel J. Bergman [mailto:noel@devtech.com]
Sent: Wednesday, February 12, 2003 10:47 PM
To: James Users List
Subject: RE: problems receiving mail
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find
lots of discussion. It does not help to just restart the mail client.
Sometimes it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail. I have 2 accounts: user1 and user2. I can send mail with
both accounts with no problems. I can also receive mail for user1 with
no problems. When I attempt to receive mail for user2 using microsoft
outlook, I get the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files. I tried different email clients with no success.
Any help would be appreciated. Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org
RE: problems receiving mail
Posted by "Noel J. Bergman" <no...@devtech.com>.
Sometimes Outlook just does that, and requires a reboot. I've seen it
myself. Check google, searching for just "0x800CCC0F", and you'll find lots
of discussion. It does not help to just restart the mail client. Sometimes
it requires rebooting Windows.
You can go into SAR-INF/environment.xml, and change the pop3server entry
from INFO to DEBUG to see the dialog between Outlook and James.
--- Noel
-----Original Message-----
From: Mike Danifo [mailto:mdanifo@mindspring.com]
Sent: Wednesday, February 12, 2003 22:36
To: james-user@jakarta.apache.org
Subject: problems receiving mail
Hello,
I am new to james, and I am having one strange problem involving
receiving mail.
I have 2 accounts: user1 and user2.
I can send mail with both accounts with no problems.
I can also receive mail for user1 with no problems.
When I attempt to receive mail for user2 using microsoft outlook, I get
the following error:
Sending and Receiving' reported error (0x800CCC0F) : 'The connection to
the server was interrupted. If this problem continues, contact your
server administrator or Internet service provider (ISP). The server
responded: +OK Message follows'
I am not sure what the problem is, and I cannot find anything useful in
the james log files.
I tried different email clients with no success.
Any help would be appreciated.
Thanks.
-Mike
---------------------------------------------------------------------
To unsubscribe, e-mail: james-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: james-user-help@jakarta.apache.org