You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@ignite.apache.org by Semen Boikov <sb...@gridgain.com> on 2014/12/05 00:45:51 UTC
Initial code import
Initial code impor is done (repository URL:
https://git-wip-us.apache.org/repos/asf/incubator-ignite, git password is
password you set at https://id.apache.org).
To setup project in IDE just import pom.xml.
Build scripts are not finilized yet, but if needed maven artifacts can be
installed using these commands:
>> mvn compile
>> mvn -P-release -DskipTests install
Thanks!
Re: Initial code import
Posted by Dmitriy Setrakyan <ds...@gridgain.com>.
Thanks, Semyon, for staying up late to make it happen. Thanks to everyone
else who worked hard to ensure smooth migration, and buildable and workable
project without any downtime.
D.
On Thu, Dec 4, 2014 at 3:45 PM, Semen Boikov <sb...@gridgain.com> wrote:
> Initial code impor is done (repository URL:
> https://git-wip-us.apache.org/repos/asf/incubator-ignite, git password is
> password you set at https://id.apache.org).
>
> To setup project in IDE just import pom.xml.
>
> Build scripts are not finilized yet, but if needed maven artifacts can be
> installed using these commands:
> >> mvn compile
> >> mvn -P-release -DskipTests install
>
> Thanks!
>
Re: Initial code import
Posted by Henry Saputra <he...@gmail.com>.
W00t! Awesome guys!
On Thu, Dec 4, 2014 at 3:45 PM, Semen Boikov <sb...@gridgain.com> wrote:
> Initial code impor is done (repository URL:
> https://git-wip-us.apache.org/repos/asf/incubator-ignite, git password is
> password you set at https://id.apache.org).
>
> To setup project in IDE just import pom.xml.
>
> Build scripts are not finilized yet, but if needed maven artifacts can be
> installed using these commands:
>>> mvn compile
>>> mvn -P-release -DskipTests install
>
> Thanks!
Re: Initial code import
Posted by Konstantin Boudnik <co...@apache.org>.
On Fri, Dec 05, 2014 at 09:15AM, Roman Shaposhnik wrote:
> On Thu, Dec 4, 2014 at 10:04 PM, Konstantin Boudnik <co...@apache.org> wrote:
> > Roman,
> >
> > I was talking to Dmitriy off-line and he said that for time being the CI will
> > be run on their TeamCity server, which will be made public in a bit. I think
> > it's too much effort to move CI from TeamCity to jenkins - doesn't really make
> > much sense, at this point.
>
> My only point is that I'd like to see -SNAPSHOT artifacts available ASAP.
> Unless you're building on builds.a.o that becomes a problem.
>
> Besides, if, as Semen mentioned, all you need to build is mvn install, what's
> the big deal?
No big deal really. Just saying that CI with tests will be elsewhere.
Cos
Re: Initial code import
Posted by Roman Shaposhnik <ro...@shaposhnik.org>.
On Fri, Dec 5, 2014 at 5:14 PM, Konstantin Boudnik <co...@apache.org> wrote:
> We have snapshots.apache.org where all dev. artifacts can be published. When
> the time of 1st release come we'll go through process for release artifacts.
And to say this explicitly: every ASF release also gets mirrored to the
Maven central, which means that you get the widest possible distribution
of your released bits.
Thanks,
Roman.
Re: Initial code import
Posted by Konstantin Boudnik <co...@apache.org>.
We have snapshots.apache.org where all dev. artifacts can be published. When
the time of 1st release come we'll go through process for release artifacts.
Cos
On Fri, Dec 05, 2014 at 04:38PM, Dmitriy Setrakyan wrote:
> Roman,
>
> We are somewhat new to this. Are you suggesting we start publishing daily
> snapshots to Maven Central or is there another Maven repository we should
> do it in?
>
> D.
>
> On Fri, Dec 5, 2014 at 9:15 AM, Roman Shaposhnik <ro...@shaposhnik.org>
> wrote:
>
> > On Thu, Dec 4, 2014 at 10:04 PM, Konstantin Boudnik <co...@apache.org>
> > wrote:
> > > Roman,
> > >
> > > I was talking to Dmitriy off-line and he said that for time being the CI
> > will
> > > be run on their TeamCity server, which will be made public in a bit. I
> > think
> > > it's too much effort to move CI from TeamCity to jenkins - doesn't
> > really make
> > > much sense, at this point.
> >
> > My only point is that I'd like to see -SNAPSHOT artifacts available ASAP.
> > Unless you're building on builds.a.o that becomes a problem.
> >
> > Besides, if, as Semen mentioned, all you need to build is mvn install,
> > what's
> > the big deal?
> >
> > Thanks,
> > Roman.
> >
Re: Initial code import
Posted by Dmitriy Setrakyan <ds...@gridgain.com>.
Roman,
We are somewhat new to this. Are you suggesting we start publishing daily
snapshots to Maven Central or is there another Maven repository we should
do it in?
D.
On Fri, Dec 5, 2014 at 9:15 AM, Roman Shaposhnik <ro...@shaposhnik.org>
wrote:
> On Thu, Dec 4, 2014 at 10:04 PM, Konstantin Boudnik <co...@apache.org>
> wrote:
> > Roman,
> >
> > I was talking to Dmitriy off-line and he said that for time being the CI
> will
> > be run on their TeamCity server, which will be made public in a bit. I
> think
> > it's too much effort to move CI from TeamCity to jenkins - doesn't
> really make
> > much sense, at this point.
>
> My only point is that I'd like to see -SNAPSHOT artifacts available ASAP.
> Unless you're building on builds.a.o that becomes a problem.
>
> Besides, if, as Semen mentioned, all you need to build is mvn install,
> what's
> the big deal?
>
> Thanks,
> Roman.
>
Re: Initial code import
Posted by Roman Shaposhnik <ro...@shaposhnik.org>.
On Thu, Dec 4, 2014 at 10:04 PM, Konstantin Boudnik <co...@apache.org> wrote:
> Roman,
>
> I was talking to Dmitriy off-line and he said that for time being the CI will
> be run on their TeamCity server, which will be made public in a bit. I think
> it's too much effort to move CI from TeamCity to jenkins - doesn't really make
> much sense, at this point.
My only point is that I'd like to see -SNAPSHOT artifacts available ASAP.
Unless you're building on builds.a.o that becomes a problem.
Besides, if, as Semen mentioned, all you need to build is mvn install, what's
the big deal?
Thanks,
Roman.
Re: Initial code import
Posted by Konstantin Boudnik <co...@apache.org>.
Roman,
I was talking to Dmitriy off-line and he said that for time being the CI will
be run on their TeamCity server, which will be made public in a bit. I think
it's too much effort to move CI from TeamCity to jenkins - doesn't really make
much sense, at this point.
Cos
On Thu, Dec 04, 2014 at 05:22PM, Roman Shaposhnik wrote:
> This is really great! Are you guys thinking of hooking this
> to the CI system over at http://builds.apache.org ?
>
> Running unit tests would be great, but just deploying the
> -SNAPSHOT artifacts nightly would be the cool first step.
>
> Thanks,
> Roman.
>
> On Thu, Dec 4, 2014 at 3:45 PM, Semen Boikov <sb...@gridgain.com> wrote:
> > Initial code impor is done (repository URL:
> > https://git-wip-us.apache.org/repos/asf/incubator-ignite, git password is
> > password you set at https://id.apache.org).
> >
> > To setup project in IDE just import pom.xml.
> >
> > Build scripts are not finilized yet, but if needed maven artifacts can be
> > installed using these commands:
> >>> mvn compile
> >>> mvn -P-release -DskipTests install
> >
> > Thanks!
Re: Initial code import
Posted by Roman Shaposhnik <ro...@shaposhnik.org>.
This is really great! Are you guys thinking of hooking this
to the CI system over at http://builds.apache.org ?
Running unit tests would be great, but just deploying the
-SNAPSHOT artifacts nightly would be the cool first step.
Thanks,
Roman.
On Thu, Dec 4, 2014 at 3:45 PM, Semen Boikov <sb...@gridgain.com> wrote:
> Initial code impor is done (repository URL:
> https://git-wip-us.apache.org/repos/asf/incubator-ignite, git password is
> password you set at https://id.apache.org).
>
> To setup project in IDE just import pom.xml.
>
> Build scripts are not finilized yet, but if needed maven artifacts can be
> installed using these commands:
>>> mvn compile
>>> mvn -P-release -DskipTests install
>
> Thanks!
Re: Initial code import
Posted by Konstantin Boudnik <co...@apache.org>.
Yes! Great stuff - thanks Semen and everyone else who've contributed. Sounds
like a lot of stuff just got in!
Now, the website and we are done with the initial steps.
Thanks everyone!
Cos
On Fri, Dec 05, 2014 at 02:45AM, Semen Boikov wrote:
> Initial code impor is done (repository URL:
> https://git-wip-us.apache.org/repos/asf/incubator-ignite, git password is
> password you set at https://id.apache.org).
>
> To setup project in IDE just import pom.xml.
>
> Build scripts are not finilized yet, but if needed maven artifacts can be
> installed using these commands:
> >> mvn compile
> >> mvn -P-release -DskipTests install
>
> Thanks!