You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@brooklyn.apache.org by Anamika Roychowdhury <an...@gmail.com> on 2015/08/24 07:33:04 UTC
Unable to ssh to any node of Riak in a Riak Cluster using extraSshPublicKeyUrls
Hi Team,
I have deployed a Riak cluster using the following YAML:
name: Riak-Cluster
location:
jclouds:aws-ec2:
credential: My-Credential
identity: My-Identity
region: region
services:
- type: brooklyn.entity.nosql.riak.RiakCluster
initialSize: 2
memberSpec:
$brooklyn:entitySpec:
type: brooklyn.entity.nosql.riak.RiakNode
provisioning.properties:
extraSshPublicKeyUrls:
- https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
I am not able to ssh to any of the node that has been created under the
Riak cluster using the private key (PORT 22 is open)
But , While I have deployed a single Riak node using the following
blueprint, I am able to ssh to the instance:
name: Riak-Node
location:
jclouds:aws-ec2:
credential: My-Credential
identity: My-Identity
region: region
services:
- type: brooklyn.entity.nosql.riak.RiakNode
provisioning.properties:
extraSshPublicKeyUrls:
https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
Can anybody please tell me on where I'm going wrong or how should I
provide extraSshPublicKeyUrls
for the cluster , so that I can ssh to the cluster instances.
Re: Unable to ssh to any node of Riak in a Riak Cluster using extraSshPublicKeyUrls
Posted by Alex Heneveld <al...@cloudsoftcorp.com>.
Hi Anamika-
The `provisioning.properties` block which authorizes your public key has
to be applied to the node, not the cluster.
Indent the last three lines and let us know how you get on.
Best
Alex
On 24/08/2015 10:49, Anamika Roychowdhury wrote:
> Hi Andrea,
>
> I feel there is no problem with alignment.
> For a single Riak Node , I am able to ssh, but the problem comes when I am
> trying to ssh to the node which is under Riak Cluster.
>
> The YAML that I am using for a Riak Cluster is following:
>
> name: Riak-Cluster
> location:
> jclouds:aws-ec2:
> credential: zN7YwJ4hhH6d3lbr9koS7az1ZPOtK+hPaf8+EyTW
> identity: AKIAIVI6M354IOE3GU3Q
> region: us-west-2
> services:
> - type: brooklyn.entity.nosql.riak.RiakCluster
> initialSize: 2
> memberSpec:
> $brooklyn:entitySpec:
> type: brooklyn.entity.nosql.riak.RiakNode
> provisioning.properties:
> extraSshPublicKeyUrls:
> https://s3-us-west-2.amazonaws.com/gowribudal/Brooklyn_Stable.pub
>
> Is this the way I should provide ssh key for the cluster?
>
> On Mon, Aug 24, 2015 at 2:41 PM, Andrea Turli <
> andrea.turli@cloudsoftcorp.com> wrote:
>
>> Hi Anamika,
>>
>> your blueprint looks correct to me but for a weird indentation in the
>> extraSshPublicKeyUrls
>>
>> could you please try something like
>>
>> name: Riak-Node
>> location:
>> jclouds:aws-ec2:
>> credential: My-Credential
>> identity: My-Identity
>> region: region
>> services:
>> - type: brooklyn.entity.nosql.riak.RiakNode
>> provisioning.properties:
>> extraSshPublicKeyUrls:
>> https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
>>
>> Let us know if that helps,
>> Andrea
>>
>> On Mon, 24 Aug 2015 at 06:33 Anamika Roychowdhury <anamika.rimpi@gmail.com
>> wrote:
>>
>>> Hi Team,
>>>
>>> I have deployed a Riak cluster using the following YAML:
>>>
>>> name: Riak-Cluster
>>> location:
>>> jclouds:aws-ec2:
>>> credential: My-Credential
>>> identity: My-Identity
>>> region: region
>>> services:
>>> - type: brooklyn.entity.nosql.riak.RiakCluster
>>> initialSize: 2
>>> memberSpec:
>>> $brooklyn:entitySpec:
>>> type: brooklyn.entity.nosql.riak.RiakNode
>>> provisioning.properties:
>>> extraSshPublicKeyUrls:
>>> - https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
>>>
>>> I am not able to ssh to any of the node that has been created under the
>>> Riak cluster using the private key (PORT 22 is open)
>>>
>>> But , While I have deployed a single Riak node using the following
>>> blueprint, I am able to ssh to the instance:
>>>
>>> name: Riak-Node
>>> location:
>>> jclouds:aws-ec2:
>>> credential: My-Credential
>>> identity: My-Identity
>>> region: region
>>> services:
>>> - type: brooklyn.entity.nosql.riak.RiakNode
>>> provisioning.properties:
>>> extraSshPublicKeyUrls:
>>> https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
>>>
>>> Can anybody please tell me on where I'm going wrong or how should I
>>> provide extraSshPublicKeyUrls
>>> for the cluster , so that I can ssh to the cluster instances.
>>>
>> --
>> Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
>> Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
>>
>> This e-mail message is confidential and for use by the addressee only. If
>> the message is received by anyone other than the addressee, please return
>> the message to the sender by replying to it and then delete the message
>> from your computer. Internet e-mails are not necessarily secure. Cloudsoft
>> Corporation Limited does not accept responsibility for changes made to this
>> message after it was sent.
>>
>> Whilst all reasonable care has been taken to avoid the transmission of
>> viruses, it is the responsibility of the recipient to ensure that the
>> onward transmission, opening or use of this message and any attachments
>> will not adversely affect its systems or data. No responsibility is
>> accepted by Cloudsoft Corporation Limited in this regard and the recipient
>> should carry out such virus and other checks as it considers appropriate.
>>
--
Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
This e-mail message is confidential and for use by the addressee only. If
the message is received by anyone other than the addressee, please return
the message to the sender by replying to it and then delete the message
from your computer. Internet e-mails are not necessarily secure. Cloudsoft
Corporation Limited does not accept responsibility for changes made to this
message after it was sent.
Whilst all reasonable care has been taken to avoid the transmission of
viruses, it is the responsibility of the recipient to ensure that the
onward transmission, opening or use of this message and any attachments
will not adversely affect its systems or data. No responsibility is
accepted by Cloudsoft Corporation Limited in this regard and the recipient
should carry out such virus and other checks as it considers appropriate.
Re: Unable to ssh to any node of Riak in a Riak Cluster using extraSshPublicKeyUrls
Posted by Anamika Roychowdhury <an...@gmail.com>.
Hi Andrea,Alex,
Thanks a bunch...
On Mon, Aug 24, 2015 at 4:31 PM, Andrea Turli <
andrea.turli@cloudsoftcorp.com> wrote:
> Hi Anamika,
>
> I just tested the following blueprint (add your prefered location to it)
>
> name: Riak-Cluster 1
>
> services:
> - type: org.apache.brooklyn.entity.nosql.riak.RiakCluster
> initialSize: 1
> brooklyn.config:
> provisioning.properties:
> extraSshPublicKeyUrls: http://mypublickey
>
> Notice here I'm using
>
> type: org.apache.brooklyn.entity.nosql.riak.RiakCluster
>
> as I'm using the latest brooklyn 0.8.0-SNAPSHOT which rename the packages
> inside `software` module. If you are using the released 0.7.0-incubating
> you can stick with
>
> - type: brooklyn.entity.nosql.riak.RiakCluster
>
> To test that it actually worked you can copy the `host.sshAddress` sensor
> value from `Sensors` tab for each riak node and run:
>
> ssh <your-user>:<host.sshAddress>
>
> and
>
> ssh -i <Brooklyn_Stable-private-key> <your-user>:<host.sshAddress>
>
> HTH,
> Andrea
>
> ---
> FYI, in general, you don't need to specify the ssh PublicKey to ssh into
> the VMs provisioned by Brooklyn: it will try to use the ssh keys associated
> to the user that launched Brooklyn.
>
>
> On Mon, 24 Aug 2015 at 10:49 Anamika Roychowdhury <anamika.rimpi@gmail.com
> >
> wrote:
>
> > Hi Andrea,
> >
> > I feel there is no problem with alignment.
> > For a single Riak Node , I am able to ssh, but the problem comes when I
> am
> > trying to ssh to the node which is under Riak Cluster.
> >
> > The YAML that I am using for a Riak Cluster is following:
> >
> > name: Riak-Cluster
> > location:
> > jclouds:aws-ec2:
> > credential: zN7YwJ4hhH6d3lbr9koS7az1ZPOtK+hPaf8+EyTW
> > identity: AKIAIVI6M354IOE3GU3Q
> > region: us-west-2
> > services:
> > - type: brooklyn.entity.nosql.riak.RiakCluster
> > initialSize: 2
> > memberSpec:
> > $brooklyn:entitySpec:
> > type: brooklyn.entity.nosql.riak.RiakNode
> > provisioning.properties:
> > extraSshPublicKeyUrls:
> > https://s3-us-west-2.amazonaws.com/gowribudal/Brooklyn_Stable.pub
> >
> > Is this the way I should provide ssh key for the cluster?
> >
> > On Mon, Aug 24, 2015 at 2:41 PM, Andrea Turli <
> > andrea.turli@cloudsoftcorp.com> wrote:
> >
> > > Hi Anamika,
> > >
> > > your blueprint looks correct to me but for a weird indentation in the
> > > extraSshPublicKeyUrls
> > >
> > > could you please try something like
> > >
> > > name: Riak-Node
> > > location:
> > > jclouds:aws-ec2:
> > > credential: My-Credential
> > > identity: My-Identity
> > > region: region
> > > services:
> > > - type: brooklyn.entity.nosql.riak.RiakNode
> > > provisioning.properties:
> > > extraSshPublicKeyUrls:
> > > https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> > >
> > > Let us know if that helps,
> > > Andrea
> > >
> > > On Mon, 24 Aug 2015 at 06:33 Anamika Roychowdhury <
> > anamika.rimpi@gmail.com
> > > >
> > > wrote:
> > >
> > > > Hi Team,
> > > >
> > > > I have deployed a Riak cluster using the following YAML:
> > > >
> > > > name: Riak-Cluster
> > > > location:
> > > > jclouds:aws-ec2:
> > > > credential: My-Credential
> > > > identity: My-Identity
> > > > region: region
> > > > services:
> > > > - type: brooklyn.entity.nosql.riak.RiakCluster
> > > > initialSize: 2
> > > > memberSpec:
> > > > $brooklyn:entitySpec:
> > > > type: brooklyn.entity.nosql.riak.RiakNode
> > > > provisioning.properties:
> > > > extraSshPublicKeyUrls:
> > > > - https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> > > >
> > > > I am not able to ssh to any of the node that has been created under
> the
> > > > Riak cluster using the private key (PORT 22 is open)
> > > >
> > > > But , While I have deployed a single Riak node using the following
> > > > blueprint, I am able to ssh to the instance:
> > > >
> > > > name: Riak-Node
> > > > location:
> > > > jclouds:aws-ec2:
> > > > credential: My-Credential
> > > > identity: My-Identity
> > > > region: region
> > > > services:
> > > > - type: brooklyn.entity.nosql.riak.RiakNode
> > > > provisioning.properties:
> > > > extraSshPublicKeyUrls:
> > > > https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> > > >
> > > > Can anybody please tell me on where I'm going wrong or how should I
> > > > provide extraSshPublicKeyUrls
> > > > for the cluster , so that I can ssh to the cluster instances.
> > > >
> > >
> > > --
> > > Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
> > > Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
> > >
> > > This e-mail message is confidential and for use by the addressee only.
> If
> > > the message is received by anyone other than the addressee, please
> return
> > > the message to the sender by replying to it and then delete the message
> > > from your computer. Internet e-mails are not necessarily secure.
> > Cloudsoft
> > > Corporation Limited does not accept responsibility for changes made to
> > this
> > > message after it was sent.
> > >
> > > Whilst all reasonable care has been taken to avoid the transmission of
> > > viruses, it is the responsibility of the recipient to ensure that the
> > > onward transmission, opening or use of this message and any attachments
> > > will not adversely affect its systems or data. No responsibility is
> > > accepted by Cloudsoft Corporation Limited in this regard and the
> > recipient
> > > should carry out such virus and other checks as it considers
> appropriate.
> > >
> >
>
> --
> Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
> Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
>
> This e-mail message is confidential and for use by the addressee only. If
> the message is received by anyone other than the addressee, please return
> the message to the sender by replying to it and then delete the message
> from your computer. Internet e-mails are not necessarily secure. Cloudsoft
> Corporation Limited does not accept responsibility for changes made to this
> message after it was sent.
>
> Whilst all reasonable care has been taken to avoid the transmission of
> viruses, it is the responsibility of the recipient to ensure that the
> onward transmission, opening or use of this message and any attachments
> will not adversely affect its systems or data. No responsibility is
> accepted by Cloudsoft Corporation Limited in this regard and the recipient
> should carry out such virus and other checks as it considers appropriate.
>
Re: Unable to ssh to any node of Riak in a Riak Cluster using extraSshPublicKeyUrls
Posted by Andrea Turli <an...@cloudsoftcorp.com>.
Hi Anamika,
I just tested the following blueprint (add your prefered location to it)
name: Riak-Cluster 1
services:
- type: org.apache.brooklyn.entity.nosql.riak.RiakCluster
initialSize: 1
brooklyn.config:
provisioning.properties:
extraSshPublicKeyUrls: http://mypublickey
Notice here I'm using
type: org.apache.brooklyn.entity.nosql.riak.RiakCluster
as I'm using the latest brooklyn 0.8.0-SNAPSHOT which rename the packages
inside `software` module. If you are using the released 0.7.0-incubating
you can stick with
- type: brooklyn.entity.nosql.riak.RiakCluster
To test that it actually worked you can copy the `host.sshAddress` sensor
value from `Sensors` tab for each riak node and run:
ssh <your-user>:<host.sshAddress>
and
ssh -i <Brooklyn_Stable-private-key> <your-user>:<host.sshAddress>
HTH,
Andrea
---
FYI, in general, you don't need to specify the ssh PublicKey to ssh into
the VMs provisioned by Brooklyn: it will try to use the ssh keys associated
to the user that launched Brooklyn.
On Mon, 24 Aug 2015 at 10:49 Anamika Roychowdhury <an...@gmail.com>
wrote:
> Hi Andrea,
>
> I feel there is no problem with alignment.
> For a single Riak Node , I am able to ssh, but the problem comes when I am
> trying to ssh to the node which is under Riak Cluster.
>
> The YAML that I am using for a Riak Cluster is following:
>
> name: Riak-Cluster
> location:
> jclouds:aws-ec2:
> credential: zN7YwJ4hhH6d3lbr9koS7az1ZPOtK+hPaf8+EyTW
> identity: AKIAIVI6M354IOE3GU3Q
> region: us-west-2
> services:
> - type: brooklyn.entity.nosql.riak.RiakCluster
> initialSize: 2
> memberSpec:
> $brooklyn:entitySpec:
> type: brooklyn.entity.nosql.riak.RiakNode
> provisioning.properties:
> extraSshPublicKeyUrls:
> https://s3-us-west-2.amazonaws.com/gowribudal/Brooklyn_Stable.pub
>
> Is this the way I should provide ssh key for the cluster?
>
> On Mon, Aug 24, 2015 at 2:41 PM, Andrea Turli <
> andrea.turli@cloudsoftcorp.com> wrote:
>
> > Hi Anamika,
> >
> > your blueprint looks correct to me but for a weird indentation in the
> > extraSshPublicKeyUrls
> >
> > could you please try something like
> >
> > name: Riak-Node
> > location:
> > jclouds:aws-ec2:
> > credential: My-Credential
> > identity: My-Identity
> > region: region
> > services:
> > - type: brooklyn.entity.nosql.riak.RiakNode
> > provisioning.properties:
> > extraSshPublicKeyUrls:
> > https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> >
> > Let us know if that helps,
> > Andrea
> >
> > On Mon, 24 Aug 2015 at 06:33 Anamika Roychowdhury <
> anamika.rimpi@gmail.com
> > >
> > wrote:
> >
> > > Hi Team,
> > >
> > > I have deployed a Riak cluster using the following YAML:
> > >
> > > name: Riak-Cluster
> > > location:
> > > jclouds:aws-ec2:
> > > credential: My-Credential
> > > identity: My-Identity
> > > region: region
> > > services:
> > > - type: brooklyn.entity.nosql.riak.RiakCluster
> > > initialSize: 2
> > > memberSpec:
> > > $brooklyn:entitySpec:
> > > type: brooklyn.entity.nosql.riak.RiakNode
> > > provisioning.properties:
> > > extraSshPublicKeyUrls:
> > > - https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> > >
> > > I am not able to ssh to any of the node that has been created under the
> > > Riak cluster using the private key (PORT 22 is open)
> > >
> > > But , While I have deployed a single Riak node using the following
> > > blueprint, I am able to ssh to the instance:
> > >
> > > name: Riak-Node
> > > location:
> > > jclouds:aws-ec2:
> > > credential: My-Credential
> > > identity: My-Identity
> > > region: region
> > > services:
> > > - type: brooklyn.entity.nosql.riak.RiakNode
> > > provisioning.properties:
> > > extraSshPublicKeyUrls:
> > > https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> > >
> > > Can anybody please tell me on where I'm going wrong or how should I
> > > provide extraSshPublicKeyUrls
> > > for the cluster , so that I can ssh to the cluster instances.
> > >
> >
> > --
> > Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
> > Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
> >
> > This e-mail message is confidential and for use by the addressee only. If
> > the message is received by anyone other than the addressee, please return
> > the message to the sender by replying to it and then delete the message
> > from your computer. Internet e-mails are not necessarily secure.
> Cloudsoft
> > Corporation Limited does not accept responsibility for changes made to
> this
> > message after it was sent.
> >
> > Whilst all reasonable care has been taken to avoid the transmission of
> > viruses, it is the responsibility of the recipient to ensure that the
> > onward transmission, opening or use of this message and any attachments
> > will not adversely affect its systems or data. No responsibility is
> > accepted by Cloudsoft Corporation Limited in this regard and the
> recipient
> > should carry out such virus and other checks as it considers appropriate.
> >
>
--
Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
This e-mail message is confidential and for use by the addressee only. If
the message is received by anyone other than the addressee, please return
the message to the sender by replying to it and then delete the message
from your computer. Internet e-mails are not necessarily secure. Cloudsoft
Corporation Limited does not accept responsibility for changes made to this
message after it was sent.
Whilst all reasonable care has been taken to avoid the transmission of
viruses, it is the responsibility of the recipient to ensure that the
onward transmission, opening or use of this message and any attachments
will not adversely affect its systems or data. No responsibility is
accepted by Cloudsoft Corporation Limited in this regard and the recipient
should carry out such virus and other checks as it considers appropriate.
Re: Unable to ssh to any node of Riak in a Riak Cluster using extraSshPublicKeyUrls
Posted by Anamika Roychowdhury <an...@gmail.com>.
Hi Andrea,
I feel there is no problem with alignment.
For a single Riak Node , I am able to ssh, but the problem comes when I am
trying to ssh to the node which is under Riak Cluster.
The YAML that I am using for a Riak Cluster is following:
name: Riak-Cluster
location:
jclouds:aws-ec2:
credential: zN7YwJ4hhH6d3lbr9koS7az1ZPOtK+hPaf8+EyTW
identity: AKIAIVI6M354IOE3GU3Q
region: us-west-2
services:
- type: brooklyn.entity.nosql.riak.RiakCluster
initialSize: 2
memberSpec:
$brooklyn:entitySpec:
type: brooklyn.entity.nosql.riak.RiakNode
provisioning.properties:
extraSshPublicKeyUrls:
https://s3-us-west-2.amazonaws.com/gowribudal/Brooklyn_Stable.pub
Is this the way I should provide ssh key for the cluster?
On Mon, Aug 24, 2015 at 2:41 PM, Andrea Turli <
andrea.turli@cloudsoftcorp.com> wrote:
> Hi Anamika,
>
> your blueprint looks correct to me but for a weird indentation in the
> extraSshPublicKeyUrls
>
> could you please try something like
>
> name: Riak-Node
> location:
> jclouds:aws-ec2:
> credential: My-Credential
> identity: My-Identity
> region: region
> services:
> - type: brooklyn.entity.nosql.riak.RiakNode
> provisioning.properties:
> extraSshPublicKeyUrls:
> https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
>
> Let us know if that helps,
> Andrea
>
> On Mon, 24 Aug 2015 at 06:33 Anamika Roychowdhury <anamika.rimpi@gmail.com
> >
> wrote:
>
> > Hi Team,
> >
> > I have deployed a Riak cluster using the following YAML:
> >
> > name: Riak-Cluster
> > location:
> > jclouds:aws-ec2:
> > credential: My-Credential
> > identity: My-Identity
> > region: region
> > services:
> > - type: brooklyn.entity.nosql.riak.RiakCluster
> > initialSize: 2
> > memberSpec:
> > $brooklyn:entitySpec:
> > type: brooklyn.entity.nosql.riak.RiakNode
> > provisioning.properties:
> > extraSshPublicKeyUrls:
> > - https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> >
> > I am not able to ssh to any of the node that has been created under the
> > Riak cluster using the private key (PORT 22 is open)
> >
> > But , While I have deployed a single Riak node using the following
> > blueprint, I am able to ssh to the instance:
> >
> > name: Riak-Node
> > location:
> > jclouds:aws-ec2:
> > credential: My-Credential
> > identity: My-Identity
> > region: region
> > services:
> > - type: brooklyn.entity.nosql.riak.RiakNode
> > provisioning.properties:
> > extraSshPublicKeyUrls:
> > https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
> >
> > Can anybody please tell me on where I'm going wrong or how should I
> > provide extraSshPublicKeyUrls
> > for the cluster , so that I can ssh to the cluster instances.
> >
>
> --
> Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
> Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
>
> This e-mail message is confidential and for use by the addressee only. If
> the message is received by anyone other than the addressee, please return
> the message to the sender by replying to it and then delete the message
> from your computer. Internet e-mails are not necessarily secure. Cloudsoft
> Corporation Limited does not accept responsibility for changes made to this
> message after it was sent.
>
> Whilst all reasonable care has been taken to avoid the transmission of
> viruses, it is the responsibility of the recipient to ensure that the
> onward transmission, opening or use of this message and any attachments
> will not adversely affect its systems or data. No responsibility is
> accepted by Cloudsoft Corporation Limited in this regard and the recipient
> should carry out such virus and other checks as it considers appropriate.
>
Re: Unable to ssh to any node of Riak in a Riak Cluster using extraSshPublicKeyUrls
Posted by Andrea Turli <an...@cloudsoftcorp.com>.
Hi Anamika,
your blueprint looks correct to me but for a weird indentation in the
extraSshPublicKeyUrls
could you please try something like
name: Riak-Node
location:
jclouds:aws-ec2:
credential: My-Credential
identity: My-Identity
region: region
services:
- type: brooklyn.entity.nosql.riak.RiakNode
provisioning.properties:
extraSshPublicKeyUrls:
https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
Let us know if that helps,
Andrea
On Mon, 24 Aug 2015 at 06:33 Anamika Roychowdhury <an...@gmail.com>
wrote:
> Hi Team,
>
> I have deployed a Riak cluster using the following YAML:
>
> name: Riak-Cluster
> location:
> jclouds:aws-ec2:
> credential: My-Credential
> identity: My-Identity
> region: region
> services:
> - type: brooklyn.entity.nosql.riak.RiakCluster
> initialSize: 2
> memberSpec:
> $brooklyn:entitySpec:
> type: brooklyn.entity.nosql.riak.RiakNode
> provisioning.properties:
> extraSshPublicKeyUrls:
> - https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
>
> I am not able to ssh to any of the node that has been created under the
> Riak cluster using the private key (PORT 22 is open)
>
> But , While I have deployed a single Riak node using the following
> blueprint, I am able to ssh to the instance:
>
> name: Riak-Node
> location:
> jclouds:aws-ec2:
> credential: My-Credential
> identity: My-Identity
> region: region
> services:
> - type: brooklyn.entity.nosql.riak.RiakNode
> provisioning.properties:
> extraSshPublicKeyUrls:
> https://s3-us-west-2.amazonaws.com/MyLocation/My_Public_Key.pub
>
> Can anybody please tell me on where I'm going wrong or how should I
> provide extraSshPublicKeyUrls
> for the cluster , so that I can ssh to the cluster instances.
>
--
Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP
This e-mail message is confidential and for use by the addressee only. If
the message is received by anyone other than the addressee, please return
the message to the sender by replying to it and then delete the message
from your computer. Internet e-mails are not necessarily secure. Cloudsoft
Corporation Limited does not accept responsibility for changes made to this
message after it was sent.
Whilst all reasonable care has been taken to avoid the transmission of
viruses, it is the responsibility of the recipient to ensure that the
onward transmission, opening or use of this message and any attachments
will not adversely affect its systems or data. No responsibility is
accepted by Cloudsoft Corporation Limited in this regard and the recipient
should carry out such virus and other checks as it considers appropriate.