You are viewing a plain text version of this content. The canonical link for it is here.
Posted to modperl@perl.apache.org by Todd Finney <tf...@boygenius.com> on 2000/04/06 06:46:44 UTC
missing modules/perl/libperl.a
I'm attempting to recompile Stronghold with mod_perl, and I've run into a
problem that no set of instructions (that I've seen) seem to help with. Any
assistance/advice/RTFMs would be appreciated.
mod_perl 1.21
Stronghold 2.42 glibc2.1 build 2412
Perl 5.005_03
This system has an existing mod_perl enabled httpd that I compiled with no
problems. It is also 1.21, with apache 1.3.9. I'd rather not poon that
instance while creating this one.
First, I tried this:
perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/
APACHE_SRC=/usr/local/apache-strong/ DO_HTTPD=1 USE_APACI=1 EVERYTHING=1
PREP_HTTPD=1
then a make, and a make install. All appears to go well, but no libperl.a is
created in modules/perl under the apache tree. So I tried this (per
INSTALL.simple.stronghold):
Makefile.PL APACHE_SRC=/usr/local/apache-strong/src/ && make test
&& make install
which ran along swimmingly until it got here:
<=== modules/sxnet
===> modules/perl
cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
-DMOD_PERL_VERSION=\"1.21\"
-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
../os/unix -I../../include -I../ssl/include -I../../ssl/include
-I../../../ssl/include -I/usr/i386-g
libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
-DUSE_PERL_SSI -Dbool=char -DHAS
_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
-DUSE_HSREGEX -DSTRONGHOLD -
DMOD_PERL -c mod_perl.c
In file included from mod_perl.h:41,
from mod_perl.c:60:
/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
semun'
/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
`local_patches' defined but not use
d
make[3]: *** [mod_perl.o] Error 1
make[2]: *** [all] Error 1
make[1]: *** [subdirs] Error 1
make[1]: Leaving directory `/usr/local/apache-strong/src'
make: *** [apache_httpd] Error 2
I then tried the instructions listed at C2net, here
http://www.c2net.com/external/?link=sh242/index.html
Switch to the ServerRoot/src directory:
# cd ServerRoot/src
This is the directory created during installation, and it may vary from the
default.
Edit the Configuration file to reflect which modules or patches you want.
AddModule modules/perl/libperl.a
Save the modified Configuration file.
Run Configure:
# ./Configure
Rebuild HTTPSD:
# make
This goes along for awhile with no apparent problems until it gets here:
<=== modules/sxnet
===> modules/perl
cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
-DMOD_PERL_VERSION=\"1.21\"
-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
../os/unix -I../../include -I../ssl/include -I../../ssl/include
-I../../../ssl/include -I/usr/i386-g
libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
-DUSE_PERL_SSI -Dbool=char -DHAS
_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
-DUSE_HSREGEX -c mod_perl.c
In file included from mod_perl.h:41,
from mod_perl.c:60:
/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
semun'
/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
`local_patches' defined but not use
d
make[2]: *** [mod_perl.o] Error 1
make[1]: *** [all] Error 1
make: *** [subdirs] Error 1
Same as before, I believe.
Additional questions I have are:
- Is there a danger of breaking my other Apache/mod_perl installation by
configuring mod_perl against a different source tree and doing a make install?
- Where is libperl.a?
Any assistance would be greatly appreciated.
thanks,
Todd
----------------------------------------------------------------------
Todd R. Finney Alpha Geek
tfinney@boygenius.com (508) 879 5792
Boy Genius Internet Development
http://www.boygenius.com
----------------------------------------------------------------------
Re: missing modules/perl/libperl.a
Posted by Doug MacEachern <do...@covalent.net>.
> USE-APACI=1 \
as stas mentioned, USE_APACI is the correct name, USE-APACI is ignored.
it could be that stronghold does not support apaci.
Re: missing modules/perl/libperl.a
Posted by Stas Bekman <sb...@stason.org>.
> >> In file included from mod_perl.h:41,
> >> from mod_perl.c:60:
> >> /usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
> >> semun'
> >> /usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
> >> `local_patches' defined but not use
> >
> >what kernel/distribution are you using? this same problem has come up
> >with older 2.0.x kernels, i'm told upgrades have cured.
>
> It's a RH6.(mumble) distribution, with a fairly recent SMP kernel.
>
> A couple of days after I posted my last message regarding this, I got it to
> compile. It would appear that the problem was the underscore in the
> USE_APACI call in my Makefile.pl line:
>
> perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/
> APACHE_SRC=/usr/local/apache-strong/ \
> DO_HTTPD=1 \
> USE_APACI=1 \
> EVERYTHING=1 \
> PREP_HTTPD=1
>
> The guide seems to waver on the hyphen vs. underscore but this did the trick:
>
> perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/ \
> APACHE_SRC=../../apache-strong/src/ \
> USE-APACI=1 \
> APACI-ARGS=--prefix=/usr/local/apache-strong/ \
> DO_HTTPD=1 \
> EVERYTHING=1 \
> PREP_HTTPD=1
There is no USE-APACI parameter. The correct one is USE_APACI. Since you
have used the wrong name it was just disregarded. Of course in your case
APACHE_PREFIX was the one you needed.
The Guide has it correctly. It's not the hyphen but the underscore. No
tricks this time.
> In looking at this now, I think that my call to APACI-ARGS is redundant
> when used with the APACHE_PREFIX argument. At any rate, it worked and the
> server is performing as advertised.
>
> Thank you very much for getting back to me, Doug.
>
> cheers,
> Todd Finney
>
>
>
>
>
>
______________________________________________________________________
Stas Bekman | JAm_pH -- Just Another mod_perl Hacker
http://stason.org/ | mod_perl Guide http://perl.apache.org/guide/
mailto:stas@stason.org | http://perl.org http://stason.org/TULARC/
http://singlesheaven.com| http://perlmonth.com http://sourcegarden.org
----------------------------------------------------------------------
Re: missing modules/perl/libperl.a
Posted by Todd Finney <tf...@boygenius.com>.
At 11:49 PM 4/11/00 , Doug MacEachern wrote:
>On Thu, 6 Apr 2000, Todd Finney wrote:
>
>> I'm attempting to recompile Stronghold with mod_perl, and I've run into a
>> problem that no set of instructions (that I've seen) seem to help with.
Any
>> assistance/advice/RTFMs would be appreciated.
>>
>> mod_perl 1.21
>> Stronghold 2.42 glibc2.1 build 2412
>> Perl 5.005_03
>>
>> This system has an existing mod_perl enabled httpd that I compiled with no
>> problems. It is also 1.21, with apache 1.3.9. I'd rather not poon that
>> instance while creating this one.
>
>with the same Perl version or an older one?
It's the same version of Perl.
>> In file included from mod_perl.h:41,
>> from mod_perl.c:60:
>> /usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
>> semun'
>> /usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
>> `local_patches' defined but not use
>
>what kernel/distribution are you using? this same problem has come up
>with older 2.0.x kernels, i'm told upgrades have cured.
It's a RH6.(mumble) distribution, with a fairly recent SMP kernel.
A couple of days after I posted my last message regarding this, I got it to
compile. It would appear that the problem was the underscore in the
USE_APACI call in my Makefile.pl line:
perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/
APACHE_SRC=/usr/local/apache-strong/ \
DO_HTTPD=1 \
USE_APACI=1 \
EVERYTHING=1 \
PREP_HTTPD=1
The guide seems to waver on the hyphen vs. underscore but this did the trick:
perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/ \
APACHE_SRC=../../apache-strong/src/ \
USE-APACI=1 \
APACI-ARGS=--prefix=/usr/local/apache-strong/ \
DO_HTTPD=1 \
EVERYTHING=1 \
PREP_HTTPD=1
In looking at this now, I think that my call to APACI-ARGS is redundant
when used with the APACHE_PREFIX argument. At any rate, it worked and the
server is performing as advertised.
Thank you very much for getting back to me, Doug.
cheers,
Todd Finney
Re: missing modules/perl/libperl.a
Posted by Doug MacEachern <do...@covalent.net>.
On Thu, 6 Apr 2000, Todd Finney wrote:
> I'm attempting to recompile Stronghold with mod_perl, and I've run into a
> problem that no set of instructions (that I've seen) seem to help with. Any
> assistance/advice/RTFMs would be appreciated.
>
> mod_perl 1.21
> Stronghold 2.42 glibc2.1 build 2412
> Perl 5.005_03
>
> This system has an existing mod_perl enabled httpd that I compiled with no
> problems. It is also 1.21, with apache 1.3.9. I'd rather not poon that
> instance while creating this one.
with the same Perl version or an older one?
> In file included from mod_perl.h:41,
> from mod_perl.c:60:
> /usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
> semun'
> /usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
> `local_patches' defined but not use
what kernel/distribution are you using? this same problem has come up
with older 2.0.x kernels, i'm told upgrades have cured.
Re: missing modules/perl/libperl.a
Posted by Todd Finney <tf...@boygenius.com>.
I can't imagine why that would be an issue. I've received replies to
questions I've asked in the past, without a problem. Did I miss the
"large-scale domain discrimination" section in the Guide?
tongue in cheek,
Todd
At 02:34 PM 4/7/00 , Buddy Lee Haystack wrote:
>Maybe "boygenius" has something to do with it.;-)
>
>
>
>Todd Finney wrote:
>>
>> It would appear, from the lack of response to this message, that I've
>> either asked:
>>
>> 1) a really dumb question that's been beaten to death and I just
>haven't
>> noticed the previous thread.
>>
>> or
>>
>> 2) a really hard question that no one has the answer to. (Given
>the sheer
>> mass of the gray matter on this list, I find that hard to believe.)
>>
>> Could someone clue me in as to which one it is?
>>
>> thanks,
>> Todd
>>
>> At 12:46 AM 4/6/00 , you wrote:
>> >I'm attempting to recompile Stronghold with mod_perl, and I've run into a
>> >problem that no set of instructions (that I've seen) seem to help with.
>Any
>> >assistance/advice/RTFMs would be appreciated.
>> >
>> >mod_perl 1.21
>> >Stronghold 2.42 glibc2.1 build 2412
>> >Perl 5.005_03
>> >
>> >This system has an existing mod_perl enabled httpd that I compiled with no
>> >problems. It is also 1.21, with apache 1.3.9. I'd rather not poon that
>> >instance while creating this one.
>> >
>> >First, I tried this:
>> >
>> >perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/
>> >APACHE_SRC=/usr/local/apache-strong/ DO_HTTPD=1 USE_APACI=1 EVERYTHING=1
>> >PREP_HTTPD=1
>> >
>> >then a make, and a make install. All appears to go well, but no
>libperl.a is
>> >created in modules/perl under the apache tree. So I tried this (per
>> >INSTALL.simple.stronghold):
>> >
>> >Makefile.PL APACHE_SRC=/usr/local/apache-strong/src/ && make test
>> >&& make install
>> >
>> >which ran along swimmingly until it got here:
>> >
>> ><=== modules/sxnet
>> >===> modules/perl
>> >cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
>> >-DMOD_PERL_VERSION=\"1.21\"
>> >-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
>> >-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
>> >../os/unix -I../../include -I../ssl/include -I../../ssl/include
>> >-I../../../ssl/include -I/usr/i386-g
>> >libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
>> >-DUSE_PERL_SSI -Dbool=char -DHAS
>> >_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
>> >-DUSE_HSREGEX -DSTRONGHOLD -
>> >DMOD_PERL -c mod_perl.c
>> >In file included from mod_perl.h:41,
>> > from mod_perl.c:60:
>> >/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
>> >semun'
>> >/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
>> >`local_patches' defined but not use
>> >d
>> >make[3]: *** [mod_perl.o] Error 1
>> >make[2]: *** [all] Error 1
>> >make[1]: *** [subdirs] Error 1
>> >make[1]: Leaving directory `/usr/local/apache-strong/src'
>> >make: *** [apache_httpd] Error 2
>> >
>> >I then tried the instructions listed at C2net, here
>> >http://www.c2net.com/external/?link=sh242/index.html
>> >
>> >Switch to the ServerRoot/src directory:
>> >
>> ># cd ServerRoot/src
>> >This is the directory created during installation, and it may vary from the
>> >default.
>> >
>> >Edit the Configuration file to reflect which modules or patches you want.
>> >
>> >AddModule modules/perl/libperl.a
>> >
>> >Save the modified Configuration file.
>> >
>> >Run Configure:
>> ># ./Configure
>> >
>> >Rebuild HTTPSD:
>> ># make
>> >
>> >This goes along for awhile with no apparent problems until it gets here:
>> >
>> ><=== modules/sxnet
>> >===> modules/perl
>> >cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
>> >-DMOD_PERL_VERSION=\"1.21\"
>> >-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
>> >-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
>> >../os/unix -I../../include -I../ssl/include -I../../ssl/include
>> >-I../../../ssl/include -I/usr/i386-g
>> >libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
>> >-DUSE_PERL_SSI -Dbool=char -DHAS
>> >_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
>> >-DUSE_HSREGEX -c mod_perl.c
>> >In file included from mod_perl.h:41,
>> > from mod_perl.c:60:
>> >/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
>> >semun'
>> >/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
>> >`local_patches' defined but not use
>> >d
>> >make[2]: *** [mod_perl.o] Error 1
>> >make[1]: *** [all] Error 1
>> >make: *** [subdirs] Error 1
>> >
>> >Same as before, I believe.
>> >
>> >Additional questions I have are:
>> >
>> > - Is there a danger of breaking my other Apache/mod_perl installation by
>> >configuring mod_perl against a different source tree and doing a make
>install?
>> >
>> > - Where is libperl.a?
>> >
>> >Any assistance would be greatly appreciated.
>> >
>> >thanks,
>> >Todd
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >----------------------------------------------------------------------
>> >Todd R. Finney Alpha Geek
>> >tfinney@boygenius.com (508) 879 5792
>> > Boy Genius Internet Development
>> > http://www.boygenius.com
>> >----------------------------------------------------------------------
Re: missing modules/perl/libperl.a
Posted by Buddy Lee Haystack <ha...@surfree.com>.
Maybe "boygenius" has something to do with it.;-)
Todd Finney wrote:
>
> It would appear, from the lack of response to this message, that I've
> either asked:
>
> 1) a really dumb question that's been beaten to death and I just haven't
> noticed the previous thread.
>
> or
>
> 2) a really hard question that no one has the answer to. (Given the sheer
> mass of the gray matter on this list, I find that hard to believe.)
>
> Could someone clue me in as to which one it is?
>
> thanks,
> Todd
>
> At 12:46 AM 4/6/00 , you wrote:
> >I'm attempting to recompile Stronghold with mod_perl, and I've run into a
> >problem that no set of instructions (that I've seen) seem to help with. Any
> >assistance/advice/RTFMs would be appreciated.
> >
> >mod_perl 1.21
> >Stronghold 2.42 glibc2.1 build 2412
> >Perl 5.005_03
> >
> >This system has an existing mod_perl enabled httpd that I compiled with no
> >problems. It is also 1.21, with apache 1.3.9. I'd rather not poon that
> >instance while creating this one.
> >
> >First, I tried this:
> >
> >perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/
> >APACHE_SRC=/usr/local/apache-strong/ DO_HTTPD=1 USE_APACI=1 EVERYTHING=1
> >PREP_HTTPD=1
> >
> >then a make, and a make install. All appears to go well, but no libperl.a is
> >created in modules/perl under the apache tree. So I tried this (per
> >INSTALL.simple.stronghold):
> >
> >Makefile.PL APACHE_SRC=/usr/local/apache-strong/src/ && make test
> >&& make install
> >
> >which ran along swimmingly until it got here:
> >
> ><=== modules/sxnet
> >===> modules/perl
> >cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
> >-DMOD_PERL_VERSION=\"1.21\"
> >-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
> >-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
> >../os/unix -I../../include -I../ssl/include -I../../ssl/include
> >-I../../../ssl/include -I/usr/i386-g
> >libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
> >-DUSE_PERL_SSI -Dbool=char -DHAS
> >_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
> >-DUSE_HSREGEX -DSTRONGHOLD -
> >DMOD_PERL -c mod_perl.c
> >In file included from mod_perl.h:41,
> > from mod_perl.c:60:
> >/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
> >semun'
> >/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
> >`local_patches' defined but not use
> >d
> >make[3]: *** [mod_perl.o] Error 1
> >make[2]: *** [all] Error 1
> >make[1]: *** [subdirs] Error 1
> >make[1]: Leaving directory `/usr/local/apache-strong/src'
> >make: *** [apache_httpd] Error 2
> >
> >I then tried the instructions listed at C2net, here
> >http://www.c2net.com/external/?link=sh242/index.html
> >
> >Switch to the ServerRoot/src directory:
> >
> ># cd ServerRoot/src
> >This is the directory created during installation, and it may vary from the
> >default.
> >
> >Edit the Configuration file to reflect which modules or patches you want.
> >
> >AddModule modules/perl/libperl.a
> >
> >Save the modified Configuration file.
> >
> >Run Configure:
> ># ./Configure
> >
> >Rebuild HTTPSD:
> ># make
> >
> >This goes along for awhile with no apparent problems until it gets here:
> >
> ><=== modules/sxnet
> >===> modules/perl
> >cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
> >-DMOD_PERL_VERSION=\"1.21\"
> >-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
> >-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
> >../os/unix -I../../include -I../ssl/include -I../../ssl/include
> >-I../../../ssl/include -I/usr/i386-g
> >libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
> >-DUSE_PERL_SSI -Dbool=char -DHAS
> >_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
> >-DUSE_HSREGEX -c mod_perl.c
> >In file included from mod_perl.h:41,
> > from mod_perl.c:60:
> >/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
> >semun'
> >/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
> >`local_patches' defined but not use
> >d
> >make[2]: *** [mod_perl.o] Error 1
> >make[1]: *** [all] Error 1
> >make: *** [subdirs] Error 1
> >
> >Same as before, I believe.
> >
> >Additional questions I have are:
> >
> > - Is there a danger of breaking my other Apache/mod_perl installation by
> >configuring mod_perl against a different source tree and doing a make install?
> >
> > - Where is libperl.a?
> >
> >Any assistance would be greatly appreciated.
> >
> >thanks,
> >Todd
> >
> >
> >
> >
> >
> >
> >
> >----------------------------------------------------------------------
> >Todd R. Finney Alpha Geek
> >tfinney@boygenius.com (508) 879 5792
> > Boy Genius Internet Development
> > http://www.boygenius.com
> >----------------------------------------------------------------------
Re: missing modules/perl/libperl.a
Posted by Todd Finney <tf...@boygenius.com>.
It would appear, from the lack of response to this message, that I've
either asked:
1) a really dumb question that's been beaten to death and I just haven't
noticed the previous thread.
or
2) a really hard question that no one has the answer to. (Given the sheer
mass of the gray matter on this list, I find that hard to believe.)
Could someone clue me in as to which one it is?
thanks,
Todd
At 12:46 AM 4/6/00 , you wrote:
>I'm attempting to recompile Stronghold with mod_perl, and I've run into a
>problem that no set of instructions (that I've seen) seem to help with. Any
>assistance/advice/RTFMs would be appreciated.
>
>mod_perl 1.21
>Stronghold 2.42 glibc2.1 build 2412
>Perl 5.005_03
>
>This system has an existing mod_perl enabled httpd that I compiled with no
>problems. It is also 1.21, with apache 1.3.9. I'd rather not poon that
>instance while creating this one.
>
>First, I tried this:
>
>perl Makefile.PL APACHE_PREFIX=/usr/local/apache-strong/
>APACHE_SRC=/usr/local/apache-strong/ DO_HTTPD=1 USE_APACI=1 EVERYTHING=1
>PREP_HTTPD=1
>
>then a make, and a make install. All appears to go well, but no libperl.a is
>created in modules/perl under the apache tree. So I tried this (per
>INSTALL.simple.stronghold):
>
>Makefile.PL APACHE_SRC=/usr/local/apache-strong/src/ && make test
>&& make install
>
>which ran along swimmingly until it got here:
>
><=== modules/sxnet
>===> modules/perl
>cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
>-DMOD_PERL_VERSION=\"1.21\"
>-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
>-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
>../os/unix -I../../include -I../ssl/include -I../../ssl/include
>-I../../../ssl/include -I/usr/i386-g
>libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
>-DUSE_PERL_SSI -Dbool=char -DHAS
>_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
>-DUSE_HSREGEX -DSTRONGHOLD -
>DMOD_PERL -c mod_perl.c
>In file included from mod_perl.h:41,
> from mod_perl.c:60:
>/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
>semun'
>/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
>`local_patches' defined but not use
>d
>make[3]: *** [mod_perl.o] Error 1
>make[2]: *** [all] Error 1
>make[1]: *** [subdirs] Error 1
>make[1]: Leaving directory `/usr/local/apache-strong/src'
>make: *** [apache_httpd] Error 2
>
>I then tried the instructions listed at C2net, here
>http://www.c2net.com/external/?link=sh242/index.html
>
>Switch to the ServerRoot/src directory:
>
># cd ServerRoot/src
>This is the directory created during installation, and it may vary from the
>default.
>
>Edit the Configuration file to reflect which modules or patches you want.
>
>AddModule modules/perl/libperl.a
>
>Save the modified Configuration file.
>
>Run Configure:
># ./Configure
>
>Rebuild HTTPSD:
># make
>
>This goes along for awhile with no apparent problems until it gets here:
>
><=== modules/sxnet
>===> modules/perl
>cc -O2 -Dbool=char -DHAS_BOOL -I/usr/lib/perl5/5.00503/i686-linux/CORE
>-DMOD_PERL_VERSION=\"1.21\"
>-DMOD_PERL_STRING_VERSION=\"mod_perl/1.21\" -I../..
>-I/usr/lib/perl5/5.00503/i686-linux/CORE -I../
>../os/unix -I../../include -I../ssl/include -I../../ssl/include
>-I../../../ssl/include -I/usr/i386-g
>libc20-linux/include -Wall -DLINUX=2 -DTARGET=\"httpsd\" -DMOD_PERL
>-DUSE_PERL_SSI -Dbool=char -DHAS
>_BOOL -DSHBUILDCODE=\"C2NetEU/2412\" -DSHVERSION=\"2.4.2\" -DSTRONGHOLD
>-DUSE_HSREGEX -c mod_perl.c
>In file included from mod_perl.h:41,
> from mod_perl.c:60:
>/usr/lib/perl5/5.00503/i686-linux/CORE/perl.h:2546: redefinition of `union
>semun'
>/usr/lib/perl5/5.00503/i686-linux/CORE/patchlevel.h:41: warning:
>`local_patches' defined but not use
>d
>make[2]: *** [mod_perl.o] Error 1
>make[1]: *** [all] Error 1
>make: *** [subdirs] Error 1
>
>Same as before, I believe.
>
>Additional questions I have are:
>
> - Is there a danger of breaking my other Apache/mod_perl installation by
>configuring mod_perl against a different source tree and doing a make install?
>
> - Where is libperl.a?
>
>Any assistance would be greatly appreciated.
>
>thanks,
>Todd
>
>
>
>
>
>
>
>----------------------------------------------------------------------
>Todd R. Finney Alpha Geek
>tfinney@boygenius.com (508) 879 5792
> Boy Genius Internet Development
> http://www.boygenius.com
>----------------------------------------------------------------------