You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by Abdullah Jibaly <am...@gmail.com> on 2007/03/08 22:22:20 UTC
Using activemq as a jabber server
Hi all,
I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
follow the directions on the xmpp page but there are lots of holes in
it. For example, how do I configure the username/password, where do i
set those up? Has anyone been able to follow that assuming no other
knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
activemessaging so I was able to get messages getting sent just fine,
but had no luck with xmpp. Also, I had to build activemq from source
using maven because the latest 4.1 binaries do not include the xmpp
transport.
So in summary:
How do i setup jabber users so they can connect?
Thanks,
Abdullah
Re: Using activemq as a jabber server
Posted by Hatta <rm...@yahoo.com>.
Hi there,
May I know the reference to the wiki which James has updated. I would also
like to know how to turn off the auto discovery of the server
Abdullah Jibaly-3 wrote:
>
> Just a note that this turned out to be the Spark client itself. James
> added a note on the wiki showing how to turn off auto discovery of
> server/port so shouldn't be an issue anymore.
>
> On 3/9/07, James Strachan <ja...@gmail.com> wrote:
>> BTW do you see any DEBUG statements showing that the XMPP transport in
>> ActiveMQ is receiving messages over XMPP?
>>
>> On 3/9/07, James Strachan <ja...@gmail.com> wrote:
>> > Are you sure there's not a firewall or something between your Spark
>> > client and the broker?
>> >
>> > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
>> > > Here's the only exception I saw when I changed the log level to
>> debug:
>> > >
>> > > DEBUG ManagementContext - Failed to create local
>> registry
>> > > java.lang.ClassNotFoundException: mx4j.tools.naming.NamingService
>> > > at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
>> > > at java.security.AccessController.doPrivileged(Native Method)
>> > > at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
>> > > at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
>> > > at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
>> > > at
>> java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
>> > > at java.lang.Class.forName0(Native Method)
>> > > at java.lang.Class.forName(Class.java:169)
>> > > at
>> org.apache.activemq.broker.jmx.ManagementContext.createConnector(ManagementContext.java:386)
>> > > at
>> org.apache.activemq.broker.jmx.ManagementContext.findMBeanServer(ManagementContext.java:301)
>> > > at
>> org.apache.activemq.broker.jmx.ManagementContext.getMBeanServer(ManagementContext.java:154)
>> > > at
>> org.apache.activemq.broker.jmx.ManagementContext.start(ManagementContext.java:78)
>> > > at
>> org.apache.activemq.broker.BrokerService.start(BrokerService.java:405)
>> > > at
>> org.apache.activemq.xbean.XBeanBrokerService.afterPropertiesSet(XBeanBrokerService.java:47)
>> > > at
>> org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(Abst
>> > > ractAutowireCapableBeanFactory.java:1062)
>> > > at
>> org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(Abstrac
>> > > tAutowireCapableBeanFactory.java:1029)
>> > > at
>> org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAut
>> > > owireCapableBeanFactory.java:420)
>> > > at
>> org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:
>> > > 245)
>> > > at
>> org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingleto
>> > > nBeanRegistry.java:141)
>> > > at
>> org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:242)
>> > >
>> > > at
>> org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:156)
>> > >
>> > > at
>> org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(Defau
>> > > ltListableBeanFactory.java:290)
>> > > at
>> org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.j
>> > > ava:348)
>> > > at
>> org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
>> > > t.java:161)
>> > > at
>> org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
>> > > t.java:51)
>> > > at
>> org.apache.activemq.xbean.XBeanBrokerFactory.createBroker(XBeanBrokerFactory.java:41)
>> > > at
>> org.apache.activemq.broker.BrokerFactory.createBroker(BrokerFactory.java:57)
>> > > at
>> org.apache.activemq.console.command.StartCommand.startBroker(StartCommand.java:82)
>> > > at
>> org.apache.activemq.console.command.StartCommand.runTask(StartCommand.java:47)
>> > > at
>> org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
>> > > at
>> org.apache.activemq.console.command.ShellCommand.runTask(ShellCommand.java:105)
>> > > at
>> org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
>> > > at
>> org.apache.activemq.console.command.ShellCommand.main(ShellCommand.java:77)
>> > > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
>> Method)
>> > > at
>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>> > > at
>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>> > > at java.lang.reflect.Method.invoke(Method.java:597)
>> > > at
>> org.apache.activemq.console.Main.runTaskClass(Main.java:206)
>> > > at org.apache.activemq.console.Main.main(Main.java:95)
>> > >
>> > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
>> > > > I'm a bit stumped on this one. All I can think of right now is you
>> > > > enable debug logging in the log4j.properties file and see if that
>> > > > helps any
>> > > >
>> > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
>> > > > > Here is a screenshot showing the error I'm getting, as well as my
>> activemq.xml:
>> > > > >
>> > > > > <beans>
>> > > > > <broker xmlns="http://activemq.org/config/1.0">
>> > > > > <transportConnectors>
>> > > > > <transportConnector name="openwire"
>> uri="tcp://localhost:61616"
>> > > > > discoveryUri="multicast://default"/>
>> > > > > <transportConnector name="stomp"
>> uri="stomp://localhost:61613"/>
>> > > > > <transportConnector name="xmpp"
>> uri="xmpp://localhost:61222"/>
>> > > > > </transportConnectors>
>> > > > > </broker>
>> > > > > </beans>
>> > > > >
>> > > > >
>> > > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
>> > > > > > I forgot to mention, I also tried that
>> simpleAuthenticationPlugin
>> > > > > > sample, put it in my activemq.xml but the command agent then
>> fails to
>> > > > > > startup. I'm running off of the svn trunk and built activemq
>> using
>> > > > > > maven.
>> > > > > >
>> > > > > > Thanks,
>> > > > > > Abdullah
>> > > > > >
>> > > > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
>> > > > > > > Hi James,
>> > > > > > >
>> > > > > > > Thanks for the response. The method you outlined is exactly
>> what I
>> > > > > > > want to use it for. However, I think my question is much more
>> basic:
>> > > > > > > In the xmpp page you have an example with spark, using a
>> username and
>> > > > > > > password right? How do I configure a username and password is
>> my
>> > > > > > > question? I tried putting in a random username and password
>> and i get
>> > > > > > > back "invalid username/password"...
>> > > > > > >
>> > > > > > > Thanks,
>> > > > > > > Abdullah
>> > > > > > >
>> > > > > > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
>> > > > > > > > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
>> > > > > > > > > Hi all,
>> > > > > > > > >
>> > > > > > > > > I'm having trouble setting up ActiveMQ as a Jabber
>> server. I tried to
>> > > > > > > > > follow the directions on the xmpp page but there are lots
>> of holes in
>> > > > > > > > > it. For example, how do I configure the
>> username/password, where do i
>> > > > > > > > > set those up? Has anyone been able to follow that
>> assuming no other
>> > > > > > > > > knowledge of ActiveMQ? BTW, I followed the article on
>> Infoq regarding
>> > > > > > > > > activemessaging so I was able to get messages getting
>> sent just fine,
>> > > > > > > > > but had no luck with xmpp. Also, I had to build activemq
>> from source
>> > > > > > > > > using maven because the latest 4.1 binaries do not
>> include the xmpp
>> > > > > > > > > transport.
>> > > > > > > > >
>> > > > > > > > > So in summary:
>> > > > > > > > >
>> > > > > > > > > How do i setup jabber users so they can connect?
>> > > > > > > >
>> > > > > > > > Note that the XMPP support is not really meant as a fully
>> fledged
>> > > > > > > > Jabber server supporting all of the various Jabber features
>> - its more
>> > > > > > > > a way to be able to use your Jabber client to talk to
>> ActiveMQ as a
>> > > > > > > > kinda management/operational tool
>> > > > > > > >
>> > > > > > > > The out of the box default has no security enabled, so you
>> don't need
>> > > > > > > > to worry about configuring anything if you just want to get
>> things
>> > > > > > > > going - just enable the xmpp transport connector in
>> activemq.xml.
>> > > > > > > >
>> > > > > > > > If you want to enable some kinda security mechanism, see...
>> > > > > > > > http://activemq.apache.org/security.html
>> > > > > > > > --
>> > > > > > > >
>> > > > > > > > James
>> > > > > > > > -------
>> > > > > > > > http://radio.weblogs.com/0112098/
>> > > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > > > >
>> > > >
>> > > >
>> > > > --
>> > > >
>> > > > James
>> > > > -------
>> > > > http://radio.weblogs.com/0112098/
>> > > >
>> > >
>> >
>> >
>> > --
>> >
>> > James
>> > -------
>> > http://radio.weblogs.com/0112098/
>> >
>>
>>
>> --
>>
>> James
>> -------
>> http://radio.weblogs.com/0112098/
>>
>
>
--
View this message in context: http://www.nabble.com/Using-activemq-as-a-jabber-server-tp9383439s2354p16833210.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Using activemq as a jabber server
Posted by Abdullah Jibaly <am...@gmail.com>.
Just a note that this turned out to be the Spark client itself. James
added a note on the wiki showing how to turn off auto discovery of
server/port so shouldn't be an issue anymore.
On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> BTW do you see any DEBUG statements showing that the XMPP transport in
> ActiveMQ is receiving messages over XMPP?
>
> On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > Are you sure there's not a firewall or something between your Spark
> > client and the broker?
> >
> > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > Here's the only exception I saw when I changed the log level to debug:
> > >
> > > DEBUG ManagementContext - Failed to create local registry
> > > java.lang.ClassNotFoundException: mx4j.tools.naming.NamingService
> > > at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
> > > at java.security.AccessController.doPrivileged(Native Method)
> > > at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
> > > at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
> > > at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
> > > at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
> > > at java.lang.Class.forName0(Native Method)
> > > at java.lang.Class.forName(Class.java:169)
> > > at org.apache.activemq.broker.jmx.ManagementContext.createConnector(ManagementContext.java:386)
> > > at org.apache.activemq.broker.jmx.ManagementContext.findMBeanServer(ManagementContext.java:301)
> > > at org.apache.activemq.broker.jmx.ManagementContext.getMBeanServer(ManagementContext.java:154)
> > > at org.apache.activemq.broker.jmx.ManagementContext.start(ManagementContext.java:78)
> > > at org.apache.activemq.broker.BrokerService.start(BrokerService.java:405)
> > > at org.apache.activemq.xbean.XBeanBrokerService.afterPropertiesSet(XBeanBrokerService.java:47)
> > > at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(Abst
> > > ractAutowireCapableBeanFactory.java:1062)
> > > at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(Abstrac
> > > tAutowireCapableBeanFactory.java:1029)
> > > at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAut
> > > owireCapableBeanFactory.java:420)
> > > at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:
> > > 245)
> > > at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingleto
> > > nBeanRegistry.java:141)
> > > at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:242)
> > >
> > > at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:156)
> > >
> > > at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(Defau
> > > ltListableBeanFactory.java:290)
> > > at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.j
> > > ava:348)
> > > at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
> > > t.java:161)
> > > at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
> > > t.java:51)
> > > at org.apache.activemq.xbean.XBeanBrokerFactory.createBroker(XBeanBrokerFactory.java:41)
> > > at org.apache.activemq.broker.BrokerFactory.createBroker(BrokerFactory.java:57)
> > > at org.apache.activemq.console.command.StartCommand.startBroker(StartCommand.java:82)
> > > at org.apache.activemq.console.command.StartCommand.runTask(StartCommand.java:47)
> > > at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
> > > at org.apache.activemq.console.command.ShellCommand.runTask(ShellCommand.java:105)
> > > at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
> > > at org.apache.activemq.console.command.ShellCommand.main(ShellCommand.java:77)
> > > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> > > at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> > > at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> > > at java.lang.reflect.Method.invoke(Method.java:597)
> > > at org.apache.activemq.console.Main.runTaskClass(Main.java:206)
> > > at org.apache.activemq.console.Main.main(Main.java:95)
> > >
> > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > > I'm a bit stumped on this one. All I can think of right now is you
> > > > enable debug logging in the log4j.properties file and see if that
> > > > helps any
> > > >
> > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > Here is a screenshot showing the error I'm getting, as well as my activemq.xml:
> > > > >
> > > > > <beans>
> > > > > <broker xmlns="http://activemq.org/config/1.0">
> > > > > <transportConnectors>
> > > > > <transportConnector name="openwire" uri="tcp://localhost:61616"
> > > > > discoveryUri="multicast://default"/>
> > > > > <transportConnector name="stomp" uri="stomp://localhost:61613"/>
> > > > > <transportConnector name="xmpp" uri="xmpp://localhost:61222"/>
> > > > > </transportConnectors>
> > > > > </broker>
> > > > > </beans>
> > > > >
> > > > >
> > > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > > I forgot to mention, I also tried that simpleAuthenticationPlugin
> > > > > > sample, put it in my activemq.xml but the command agent then fails to
> > > > > > startup. I'm running off of the svn trunk and built activemq using
> > > > > > maven.
> > > > > >
> > > > > > Thanks,
> > > > > > Abdullah
> > > > > >
> > > > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > > > Hi James,
> > > > > > >
> > > > > > > Thanks for the response. The method you outlined is exactly what I
> > > > > > > want to use it for. However, I think my question is much more basic:
> > > > > > > In the xmpp page you have an example with spark, using a username and
> > > > > > > password right? How do I configure a username and password is my
> > > > > > > question? I tried putting in a random username and password and i get
> > > > > > > back "invalid username/password"...
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Abdullah
> > > > > > >
> > > > > > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > > > > > > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > > > > > Hi all,
> > > > > > > > >
> > > > > > > > > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > > > > > > > > follow the directions on the xmpp page but there are lots of holes in
> > > > > > > > > it. For example, how do I configure the username/password, where do i
> > > > > > > > > set those up? Has anyone been able to follow that assuming no other
> > > > > > > > > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > > > > > > > > activemessaging so I was able to get messages getting sent just fine,
> > > > > > > > > but had no luck with xmpp. Also, I had to build activemq from source
> > > > > > > > > using maven because the latest 4.1 binaries do not include the xmpp
> > > > > > > > > transport.
> > > > > > > > >
> > > > > > > > > So in summary:
> > > > > > > > >
> > > > > > > > > How do i setup jabber users so they can connect?
> > > > > > > >
> > > > > > > > Note that the XMPP support is not really meant as a fully fledged
> > > > > > > > Jabber server supporting all of the various Jabber features - its more
> > > > > > > > a way to be able to use your Jabber client to talk to ActiveMQ as a
> > > > > > > > kinda management/operational tool
> > > > > > > >
> > > > > > > > The out of the box default has no security enabled, so you don't need
> > > > > > > > to worry about configuring anything if you just want to get things
> > > > > > > > going - just enable the xmpp transport connector in activemq.xml.
> > > > > > > >
> > > > > > > > If you want to enable some kinda security mechanism, see...
> > > > > > > > http://activemq.apache.org/security.html
> > > > > > > > --
> > > > > > > >
> > > > > > > > James
> > > > > > > > -------
> > > > > > > > http://radio.weblogs.com/0112098/
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > >
> > > > James
> > > > -------
> > > > http://radio.weblogs.com/0112098/
> > > >
> > >
> >
> >
> > --
> >
> > James
> > -------
> > http://radio.weblogs.com/0112098/
> >
>
>
> --
>
> James
> -------
> http://radio.weblogs.com/0112098/
>
Re: Using activemq as a jabber server
Posted by James Strachan <ja...@gmail.com>.
BTW do you see any DEBUG statements showing that the XMPP transport in
ActiveMQ is receiving messages over XMPP?
On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> Are you sure there's not a firewall or something between your Spark
> client and the broker?
>
> On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > Here's the only exception I saw when I changed the log level to debug:
> >
> > DEBUG ManagementContext - Failed to create local registry
> > java.lang.ClassNotFoundException: mx4j.tools.naming.NamingService
> > at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
> > at java.security.AccessController.doPrivileged(Native Method)
> > at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
> > at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
> > at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
> > at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
> > at java.lang.Class.forName0(Native Method)
> > at java.lang.Class.forName(Class.java:169)
> > at org.apache.activemq.broker.jmx.ManagementContext.createConnector(ManagementContext.java:386)
> > at org.apache.activemq.broker.jmx.ManagementContext.findMBeanServer(ManagementContext.java:301)
> > at org.apache.activemq.broker.jmx.ManagementContext.getMBeanServer(ManagementContext.java:154)
> > at org.apache.activemq.broker.jmx.ManagementContext.start(ManagementContext.java:78)
> > at org.apache.activemq.broker.BrokerService.start(BrokerService.java:405)
> > at org.apache.activemq.xbean.XBeanBrokerService.afterPropertiesSet(XBeanBrokerService.java:47)
> > at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(Abst
> > ractAutowireCapableBeanFactory.java:1062)
> > at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(Abstrac
> > tAutowireCapableBeanFactory.java:1029)
> > at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAut
> > owireCapableBeanFactory.java:420)
> > at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:
> > 245)
> > at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingleto
> > nBeanRegistry.java:141)
> > at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:242)
> >
> > at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:156)
> >
> > at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(Defau
> > ltListableBeanFactory.java:290)
> > at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.j
> > ava:348)
> > at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
> > t.java:161)
> > at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
> > t.java:51)
> > at org.apache.activemq.xbean.XBeanBrokerFactory.createBroker(XBeanBrokerFactory.java:41)
> > at org.apache.activemq.broker.BrokerFactory.createBroker(BrokerFactory.java:57)
> > at org.apache.activemq.console.command.StartCommand.startBroker(StartCommand.java:82)
> > at org.apache.activemq.console.command.StartCommand.runTask(StartCommand.java:47)
> > at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
> > at org.apache.activemq.console.command.ShellCommand.runTask(ShellCommand.java:105)
> > at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
> > at org.apache.activemq.console.command.ShellCommand.main(ShellCommand.java:77)
> > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> > at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> > at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> > at java.lang.reflect.Method.invoke(Method.java:597)
> > at org.apache.activemq.console.Main.runTaskClass(Main.java:206)
> > at org.apache.activemq.console.Main.main(Main.java:95)
> >
> > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > I'm a bit stumped on this one. All I can think of right now is you
> > > enable debug logging in the log4j.properties file and see if that
> > > helps any
> > >
> > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > Here is a screenshot showing the error I'm getting, as well as my activemq.xml:
> > > >
> > > > <beans>
> > > > <broker xmlns="http://activemq.org/config/1.0">
> > > > <transportConnectors>
> > > > <transportConnector name="openwire" uri="tcp://localhost:61616"
> > > > discoveryUri="multicast://default"/>
> > > > <transportConnector name="stomp" uri="stomp://localhost:61613"/>
> > > > <transportConnector name="xmpp" uri="xmpp://localhost:61222"/>
> > > > </transportConnectors>
> > > > </broker>
> > > > </beans>
> > > >
> > > >
> > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > I forgot to mention, I also tried that simpleAuthenticationPlugin
> > > > > sample, put it in my activemq.xml but the command agent then fails to
> > > > > startup. I'm running off of the svn trunk and built activemq using
> > > > > maven.
> > > > >
> > > > > Thanks,
> > > > > Abdullah
> > > > >
> > > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > > Hi James,
> > > > > >
> > > > > > Thanks for the response. The method you outlined is exactly what I
> > > > > > want to use it for. However, I think my question is much more basic:
> > > > > > In the xmpp page you have an example with spark, using a username and
> > > > > > password right? How do I configure a username and password is my
> > > > > > question? I tried putting in a random username and password and i get
> > > > > > back "invalid username/password"...
> > > > > >
> > > > > > Thanks,
> > > > > > Abdullah
> > > > > >
> > > > > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > > > > > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > > > > Hi all,
> > > > > > > >
> > > > > > > > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > > > > > > > follow the directions on the xmpp page but there are lots of holes in
> > > > > > > > it. For example, how do I configure the username/password, where do i
> > > > > > > > set those up? Has anyone been able to follow that assuming no other
> > > > > > > > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > > > > > > > activemessaging so I was able to get messages getting sent just fine,
> > > > > > > > but had no luck with xmpp. Also, I had to build activemq from source
> > > > > > > > using maven because the latest 4.1 binaries do not include the xmpp
> > > > > > > > transport.
> > > > > > > >
> > > > > > > > So in summary:
> > > > > > > >
> > > > > > > > How do i setup jabber users so they can connect?
> > > > > > >
> > > > > > > Note that the XMPP support is not really meant as a fully fledged
> > > > > > > Jabber server supporting all of the various Jabber features - its more
> > > > > > > a way to be able to use your Jabber client to talk to ActiveMQ as a
> > > > > > > kinda management/operational tool
> > > > > > >
> > > > > > > The out of the box default has no security enabled, so you don't need
> > > > > > > to worry about configuring anything if you just want to get things
> > > > > > > going - just enable the xmpp transport connector in activemq.xml.
> > > > > > >
> > > > > > > If you want to enable some kinda security mechanism, see...
> > > > > > > http://activemq.apache.org/security.html
> > > > > > > --
> > > > > > >
> > > > > > > James
> > > > > > > -------
> > > > > > > http://radio.weblogs.com/0112098/
> > > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > > --
> > >
> > > James
> > > -------
> > > http://radio.weblogs.com/0112098/
> > >
> >
>
>
> --
>
> James
> -------
> http://radio.weblogs.com/0112098/
>
--
James
-------
http://radio.weblogs.com/0112098/
Re: Using activemq as a jabber server
Posted by James Strachan <ja...@gmail.com>.
Are you sure there's not a firewall or something between your Spark
client and the broker?
On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> Here's the only exception I saw when I changed the log level to debug:
>
> DEBUG ManagementContext - Failed to create local registry
> java.lang.ClassNotFoundException: mx4j.tools.naming.NamingService
> at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
> at java.security.AccessController.doPrivileged(Native Method)
> at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
> at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
> at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
> at java.lang.Class.forName0(Native Method)
> at java.lang.Class.forName(Class.java:169)
> at org.apache.activemq.broker.jmx.ManagementContext.createConnector(ManagementContext.java:386)
> at org.apache.activemq.broker.jmx.ManagementContext.findMBeanServer(ManagementContext.java:301)
> at org.apache.activemq.broker.jmx.ManagementContext.getMBeanServer(ManagementContext.java:154)
> at org.apache.activemq.broker.jmx.ManagementContext.start(ManagementContext.java:78)
> at org.apache.activemq.broker.BrokerService.start(BrokerService.java:405)
> at org.apache.activemq.xbean.XBeanBrokerService.afterPropertiesSet(XBeanBrokerService.java:47)
> at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(Abst
> ractAutowireCapableBeanFactory.java:1062)
> at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(Abstrac
> tAutowireCapableBeanFactory.java:1029)
> at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAut
> owireCapableBeanFactory.java:420)
> at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:
> 245)
> at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingleto
> nBeanRegistry.java:141)
> at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:242)
>
> at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:156)
>
> at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(Defau
> ltListableBeanFactory.java:290)
> at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.j
> ava:348)
> at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
> t.java:161)
> at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
> t.java:51)
> at org.apache.activemq.xbean.XBeanBrokerFactory.createBroker(XBeanBrokerFactory.java:41)
> at org.apache.activemq.broker.BrokerFactory.createBroker(BrokerFactory.java:57)
> at org.apache.activemq.console.command.StartCommand.startBroker(StartCommand.java:82)
> at org.apache.activemq.console.command.StartCommand.runTask(StartCommand.java:47)
> at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
> at org.apache.activemq.console.command.ShellCommand.runTask(ShellCommand.java:105)
> at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
> at org.apache.activemq.console.command.ShellCommand.main(ShellCommand.java:77)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> at java.lang.reflect.Method.invoke(Method.java:597)
> at org.apache.activemq.console.Main.runTaskClass(Main.java:206)
> at org.apache.activemq.console.Main.main(Main.java:95)
>
> On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > I'm a bit stumped on this one. All I can think of right now is you
> > enable debug logging in the log4j.properties file and see if that
> > helps any
> >
> > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > Here is a screenshot showing the error I'm getting, as well as my activemq.xml:
> > >
> > > <beans>
> > > <broker xmlns="http://activemq.org/config/1.0">
> > > <transportConnectors>
> > > <transportConnector name="openwire" uri="tcp://localhost:61616"
> > > discoveryUri="multicast://default"/>
> > > <transportConnector name="stomp" uri="stomp://localhost:61613"/>
> > > <transportConnector name="xmpp" uri="xmpp://localhost:61222"/>
> > > </transportConnectors>
> > > </broker>
> > > </beans>
> > >
> > >
> > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > I forgot to mention, I also tried that simpleAuthenticationPlugin
> > > > sample, put it in my activemq.xml but the command agent then fails to
> > > > startup. I'm running off of the svn trunk and built activemq using
> > > > maven.
> > > >
> > > > Thanks,
> > > > Abdullah
> > > >
> > > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > Hi James,
> > > > >
> > > > > Thanks for the response. The method you outlined is exactly what I
> > > > > want to use it for. However, I think my question is much more basic:
> > > > > In the xmpp page you have an example with spark, using a username and
> > > > > password right? How do I configure a username and password is my
> > > > > question? I tried putting in a random username and password and i get
> > > > > back "invalid username/password"...
> > > > >
> > > > > Thanks,
> > > > > Abdullah
> > > > >
> > > > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > > > > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > > > Hi all,
> > > > > > >
> > > > > > > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > > > > > > follow the directions on the xmpp page but there are lots of holes in
> > > > > > > it. For example, how do I configure the username/password, where do i
> > > > > > > set those up? Has anyone been able to follow that assuming no other
> > > > > > > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > > > > > > activemessaging so I was able to get messages getting sent just fine,
> > > > > > > but had no luck with xmpp. Also, I had to build activemq from source
> > > > > > > using maven because the latest 4.1 binaries do not include the xmpp
> > > > > > > transport.
> > > > > > >
> > > > > > > So in summary:
> > > > > > >
> > > > > > > How do i setup jabber users so they can connect?
> > > > > >
> > > > > > Note that the XMPP support is not really meant as a fully fledged
> > > > > > Jabber server supporting all of the various Jabber features - its more
> > > > > > a way to be able to use your Jabber client to talk to ActiveMQ as a
> > > > > > kinda management/operational tool
> > > > > >
> > > > > > The out of the box default has no security enabled, so you don't need
> > > > > > to worry about configuring anything if you just want to get things
> > > > > > going - just enable the xmpp transport connector in activemq.xml.
> > > > > >
> > > > > > If you want to enable some kinda security mechanism, see...
> > > > > > http://activemq.apache.org/security.html
> > > > > > --
> > > > > >
> > > > > > James
> > > > > > -------
> > > > > > http://radio.weblogs.com/0112098/
> > > > > >
> > > > >
> > > >
> > >
> > >
> >
> >
> > --
> >
> > James
> > -------
> > http://radio.weblogs.com/0112098/
> >
>
--
James
-------
http://radio.weblogs.com/0112098/
Re: Using activemq as a jabber server
Posted by 107 <10...@motiw.ru>.
Hello, All!
I also try to use ActiveMQ as Jabber Server.
I was build it from last svn trunk "apache-activemq-5.0-SNAPSHOT" (20070823)
After start I see only one message about "Failed to create local registry",
and ActiveMQ starts successfully (for ex. WebConsole works fine).
But when I try to login into Jabber (by Spark client) I see only:
DEBUG XmppTransport - XMPP consumer thread starting
DEBUG XmppTransport - Sending initial stream element
DEBUG XmppTransport - Initial stream element sent!
and nothig else.
After 10-20 seconds Spark says "Invalid user name and password". PSI for ex.
show nothing in it XML-console.
Then I try to add some lib-files to ./apache-activemq/lib
(for ex. stax-1.2.0.jar, wstx-asl-3.2.1.jar, and others).
After it, I can log into Jabber server by Spark client successfully!!!
Log file says:
DEBUG ProtocolConverter - Iq Auth Query to: null type: get
from: null id: zrBoD-0 resource: null username: test1
DEBUG ProtocolConverter - Iq Roster to: null type: get from:
null id: zrBoD-2 item: []
DEBUG ProtocolConverter - Iq Disco Items query to: localhost
type: get from: null id: zrBoD-3 node: null item: []
WARN ProtocolConverter - Iq Unknown to: null type: get from:
test1@localhost/spark id: zrBoD-4 element namespace: vcard-temp localName:
vCard
WARN ProtocolConverter - Iq Unknown to: null type: get from:
null id: zrBoD-5 element namespace:
http://www.jivesoftware.org/protocol/sharedgroup localName: sharedgroup
Then I try add contact in roster, but get a "Unable add contact" message.
Log says:
DEBUG ProtocolConverter - Iq Roster to: null type: set from:
null id: vw1gE-10 item: [jabber.iq.roster.Item@1ae7b85]
DEBUG ProtocolConverter - Presence: null id: vw1gE-11 to:
test1@localhost type: subscribe showOrStatusOrPriority: [] any: []
#### Creating ActiveMQ destination for: test1
DEBUG ProtocolConverter - Presence: null id: vw1gE-12 to:
test1@localhost type: subscribed showOrStatusOrPriority: [] any: []
#### Creating ActiveMQ destination for: test1
Button "Join Conference Room" has no effect too.
How do you think, what can it be, and how use ActiveMQ as Jabber server
correctly (maybe you have a article or documentation about it)?
Thank you, All!!!
--
View this message in context: http://www.nabble.com/Using-activemq-as-a-jabber-server-tf3372095s2354.html#a12311278
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Using activemq as a jabber server
Posted by Abdullah Jibaly <am...@gmail.com>.
Here's the only exception I saw when I changed the log level to debug:
DEBUG ManagementContext - Failed to create local registry
java.lang.ClassNotFoundException: mx4j.tools.naming.NamingService
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.apache.activemq.broker.jmx.ManagementContext.createConnector(ManagementContext.java:386)
at org.apache.activemq.broker.jmx.ManagementContext.findMBeanServer(ManagementContext.java:301)
at org.apache.activemq.broker.jmx.ManagementContext.getMBeanServer(ManagementContext.java:154)
at org.apache.activemq.broker.jmx.ManagementContext.start(ManagementContext.java:78)
at org.apache.activemq.broker.BrokerService.start(BrokerService.java:405)
at org.apache.activemq.xbean.XBeanBrokerService.afterPropertiesSet(XBeanBrokerService.java:47)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(Abst
ractAutowireCapableBeanFactory.java:1062)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(Abstrac
tAutowireCapableBeanFactory.java:1029)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAut
owireCapableBeanFactory.java:420)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:
245)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingleto
nBeanRegistry.java:141)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:242)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:156)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(Defau
ltListableBeanFactory.java:290)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.j
ava:348)
at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
t.java:161)
at org.apache.xbean.spring.context.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContex
t.java:51)
at org.apache.activemq.xbean.XBeanBrokerFactory.createBroker(XBeanBrokerFactory.java:41)
at org.apache.activemq.broker.BrokerFactory.createBroker(BrokerFactory.java:57)
at org.apache.activemq.console.command.StartCommand.startBroker(StartCommand.java:82)
at org.apache.activemq.console.command.StartCommand.runTask(StartCommand.java:47)
at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
at org.apache.activemq.console.command.ShellCommand.runTask(ShellCommand.java:105)
at org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:50)
at org.apache.activemq.console.command.ShellCommand.main(ShellCommand.java:77)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.activemq.console.Main.runTaskClass(Main.java:206)
at org.apache.activemq.console.Main.main(Main.java:95)
On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> I'm a bit stumped on this one. All I can think of right now is you
> enable debug logging in the log4j.properties file and see if that
> helps any
>
> On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > Here is a screenshot showing the error I'm getting, as well as my activemq.xml:
> >
> > <beans>
> > <broker xmlns="http://activemq.org/config/1.0">
> > <transportConnectors>
> > <transportConnector name="openwire" uri="tcp://localhost:61616"
> > discoveryUri="multicast://default"/>
> > <transportConnector name="stomp" uri="stomp://localhost:61613"/>
> > <transportConnector name="xmpp" uri="xmpp://localhost:61222"/>
> > </transportConnectors>
> > </broker>
> > </beans>
> >
> >
> > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > I forgot to mention, I also tried that simpleAuthenticationPlugin
> > > sample, put it in my activemq.xml but the command agent then fails to
> > > startup. I'm running off of the svn trunk and built activemq using
> > > maven.
> > >
> > > Thanks,
> > > Abdullah
> > >
> > > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > Hi James,
> > > >
> > > > Thanks for the response. The method you outlined is exactly what I
> > > > want to use it for. However, I think my question is much more basic:
> > > > In the xmpp page you have an example with spark, using a username and
> > > > password right? How do I configure a username and password is my
> > > > question? I tried putting in a random username and password and i get
> > > > back "invalid username/password"...
> > > >
> > > > Thanks,
> > > > Abdullah
> > > >
> > > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > > > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > > Hi all,
> > > > > >
> > > > > > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > > > > > follow the directions on the xmpp page but there are lots of holes in
> > > > > > it. For example, how do I configure the username/password, where do i
> > > > > > set those up? Has anyone been able to follow that assuming no other
> > > > > > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > > > > > activemessaging so I was able to get messages getting sent just fine,
> > > > > > but had no luck with xmpp. Also, I had to build activemq from source
> > > > > > using maven because the latest 4.1 binaries do not include the xmpp
> > > > > > transport.
> > > > > >
> > > > > > So in summary:
> > > > > >
> > > > > > How do i setup jabber users so they can connect?
> > > > >
> > > > > Note that the XMPP support is not really meant as a fully fledged
> > > > > Jabber server supporting all of the various Jabber features - its more
> > > > > a way to be able to use your Jabber client to talk to ActiveMQ as a
> > > > > kinda management/operational tool
> > > > >
> > > > > The out of the box default has no security enabled, so you don't need
> > > > > to worry about configuring anything if you just want to get things
> > > > > going - just enable the xmpp transport connector in activemq.xml.
> > > > >
> > > > > If you want to enable some kinda security mechanism, see...
> > > > > http://activemq.apache.org/security.html
> > > > > --
> > > > >
> > > > > James
> > > > > -------
> > > > > http://radio.weblogs.com/0112098/
> > > > >
> > > >
> > >
> >
> >
>
>
> --
>
> James
> -------
> http://radio.weblogs.com/0112098/
>
Re: Using activemq as a jabber server
Posted by James Strachan <ja...@gmail.com>.
I'm a bit stumped on this one. All I can think of right now is you
enable debug logging in the log4j.properties file and see if that
helps any
On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> Here is a screenshot showing the error I'm getting, as well as my activemq.xml:
>
> <beans>
> <broker xmlns="http://activemq.org/config/1.0">
> <transportConnectors>
> <transportConnector name="openwire" uri="tcp://localhost:61616"
> discoveryUri="multicast://default"/>
> <transportConnector name="stomp" uri="stomp://localhost:61613"/>
> <transportConnector name="xmpp" uri="xmpp://localhost:61222"/>
> </transportConnectors>
> </broker>
> </beans>
>
>
> On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > I forgot to mention, I also tried that simpleAuthenticationPlugin
> > sample, put it in my activemq.xml but the command agent then fails to
> > startup. I'm running off of the svn trunk and built activemq using
> > maven.
> >
> > Thanks,
> > Abdullah
> >
> > On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > Hi James,
> > >
> > > Thanks for the response. The method you outlined is exactly what I
> > > want to use it for. However, I think my question is much more basic:
> > > In the xmpp page you have an example with spark, using a username and
> > > password right? How do I configure a username and password is my
> > > question? I tried putting in a random username and password and i get
> > > back "invalid username/password"...
> > >
> > > Thanks,
> > > Abdullah
> > >
> > > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > > Hi all,
> > > > >
> > > > > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > > > > follow the directions on the xmpp page but there are lots of holes in
> > > > > it. For example, how do I configure the username/password, where do i
> > > > > set those up? Has anyone been able to follow that assuming no other
> > > > > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > > > > activemessaging so I was able to get messages getting sent just fine,
> > > > > but had no luck with xmpp. Also, I had to build activemq from source
> > > > > using maven because the latest 4.1 binaries do not include the xmpp
> > > > > transport.
> > > > >
> > > > > So in summary:
> > > > >
> > > > > How do i setup jabber users so they can connect?
> > > >
> > > > Note that the XMPP support is not really meant as a fully fledged
> > > > Jabber server supporting all of the various Jabber features - its more
> > > > a way to be able to use your Jabber client to talk to ActiveMQ as a
> > > > kinda management/operational tool
> > > >
> > > > The out of the box default has no security enabled, so you don't need
> > > > to worry about configuring anything if you just want to get things
> > > > going - just enable the xmpp transport connector in activemq.xml.
> > > >
> > > > If you want to enable some kinda security mechanism, see...
> > > > http://activemq.apache.org/security.html
> > > > --
> > > >
> > > > James
> > > > -------
> > > > http://radio.weblogs.com/0112098/
> > > >
> > >
> >
>
>
--
James
-------
http://radio.weblogs.com/0112098/
Re: Using activemq as a jabber server
Posted by Abdullah Jibaly <am...@gmail.com>.
Here is a screenshot showing the error I'm getting, as well as my activemq.xml:
<beans>
<broker xmlns="http://activemq.org/config/1.0">
<transportConnectors>
<transportConnector name="openwire" uri="tcp://localhost:61616"
discoveryUri="multicast://default"/>
<transportConnector name="stomp" uri="stomp://localhost:61613"/>
<transportConnector name="xmpp" uri="xmpp://localhost:61222"/>
</transportConnectors>
</broker>
</beans>
On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> I forgot to mention, I also tried that simpleAuthenticationPlugin
> sample, put it in my activemq.xml but the command agent then fails to
> startup. I'm running off of the svn trunk and built activemq using
> maven.
>
> Thanks,
> Abdullah
>
> On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > Hi James,
> >
> > Thanks for the response. The method you outlined is exactly what I
> > want to use it for. However, I think my question is much more basic:
> > In the xmpp page you have an example with spark, using a username and
> > password right? How do I configure a username and password is my
> > question? I tried putting in a random username and password and i get
> > back "invalid username/password"...
> >
> > Thanks,
> > Abdullah
> >
> > On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > > Hi all,
> > > >
> > > > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > > > follow the directions on the xmpp page but there are lots of holes in
> > > > it. For example, how do I configure the username/password, where do i
> > > > set those up? Has anyone been able to follow that assuming no other
> > > > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > > > activemessaging so I was able to get messages getting sent just fine,
> > > > but had no luck with xmpp. Also, I had to build activemq from source
> > > > using maven because the latest 4.1 binaries do not include the xmpp
> > > > transport.
> > > >
> > > > So in summary:
> > > >
> > > > How do i setup jabber users so they can connect?
> > >
> > > Note that the XMPP support is not really meant as a fully fledged
> > > Jabber server supporting all of the various Jabber features - its more
> > > a way to be able to use your Jabber client to talk to ActiveMQ as a
> > > kinda management/operational tool
> > >
> > > The out of the box default has no security enabled, so you don't need
> > > to worry about configuring anything if you just want to get things
> > > going - just enable the xmpp transport connector in activemq.xml.
> > >
> > > If you want to enable some kinda security mechanism, see...
> > > http://activemq.apache.org/security.html
> > > --
> > >
> > > James
> > > -------
> > > http://radio.weblogs.com/0112098/
> > >
> >
>
Re: Using activemq as a jabber server
Posted by Abdullah Jibaly <am...@gmail.com>.
I forgot to mention, I also tried that simpleAuthenticationPlugin
sample, put it in my activemq.xml but the command agent then fails to
startup. I'm running off of the svn trunk and built activemq using
maven.
Thanks,
Abdullah
On 3/9/07, Abdullah Jibaly <am...@gmail.com> wrote:
> Hi James,
>
> Thanks for the response. The method you outlined is exactly what I
> want to use it for. However, I think my question is much more basic:
> In the xmpp page you have an example with spark, using a username and
> password right? How do I configure a username and password is my
> question? I tried putting in a random username and password and i get
> back "invalid username/password"...
>
> Thanks,
> Abdullah
>
> On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> > On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > > Hi all,
> > >
> > > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > > follow the directions on the xmpp page but there are lots of holes in
> > > it. For example, how do I configure the username/password, where do i
> > > set those up? Has anyone been able to follow that assuming no other
> > > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > > activemessaging so I was able to get messages getting sent just fine,
> > > but had no luck with xmpp. Also, I had to build activemq from source
> > > using maven because the latest 4.1 binaries do not include the xmpp
> > > transport.
> > >
> > > So in summary:
> > >
> > > How do i setup jabber users so they can connect?
> >
> > Note that the XMPP support is not really meant as a fully fledged
> > Jabber server supporting all of the various Jabber features - its more
> > a way to be able to use your Jabber client to talk to ActiveMQ as a
> > kinda management/operational tool
> >
> > The out of the box default has no security enabled, so you don't need
> > to worry about configuring anything if you just want to get things
> > going - just enable the xmpp transport connector in activemq.xml.
> >
> > If you want to enable some kinda security mechanism, see...
> > http://activemq.apache.org/security.html
> > --
> >
> > James
> > -------
> > http://radio.weblogs.com/0112098/
> >
>
Re: Using activemq as a jabber server
Posted by Abdullah Jibaly <am...@gmail.com>.
Hi James,
Thanks for the response. The method you outlined is exactly what I
want to use it for. However, I think my question is much more basic:
In the xmpp page you have an example with spark, using a username and
password right? How do I configure a username and password is my
question? I tried putting in a random username and password and i get
back "invalid username/password"...
Thanks,
Abdullah
On 3/9/07, James Strachan <ja...@gmail.com> wrote:
> On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> > Hi all,
> >
> > I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> > follow the directions on the xmpp page but there are lots of holes in
> > it. For example, how do I configure the username/password, where do i
> > set those up? Has anyone been able to follow that assuming no other
> > knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> > activemessaging so I was able to get messages getting sent just fine,
> > but had no luck with xmpp. Also, I had to build activemq from source
> > using maven because the latest 4.1 binaries do not include the xmpp
> > transport.
> >
> > So in summary:
> >
> > How do i setup jabber users so they can connect?
>
> Note that the XMPP support is not really meant as a fully fledged
> Jabber server supporting all of the various Jabber features - its more
> a way to be able to use your Jabber client to talk to ActiveMQ as a
> kinda management/operational tool
>
> The out of the box default has no security enabled, so you don't need
> to worry about configuring anything if you just want to get things
> going - just enable the xmpp transport connector in activemq.xml.
>
> If you want to enable some kinda security mechanism, see...
> http://activemq.apache.org/security.html
> --
>
> James
> -------
> http://radio.weblogs.com/0112098/
>
Re: Using activemq as a jabber server
Posted by James Strachan <ja...@gmail.com>.
On 3/8/07, Abdullah Jibaly <am...@gmail.com> wrote:
> Hi all,
>
> I'm having trouble setting up ActiveMQ as a Jabber server. I tried to
> follow the directions on the xmpp page but there are lots of holes in
> it. For example, how do I configure the username/password, where do i
> set those up? Has anyone been able to follow that assuming no other
> knowledge of ActiveMQ? BTW, I followed the article on Infoq regarding
> activemessaging so I was able to get messages getting sent just fine,
> but had no luck with xmpp. Also, I had to build activemq from source
> using maven because the latest 4.1 binaries do not include the xmpp
> transport.
>
> So in summary:
>
> How do i setup jabber users so they can connect?
Note that the XMPP support is not really meant as a fully fledged
Jabber server supporting all of the various Jabber features - its more
a way to be able to use your Jabber client to talk to ActiveMQ as a
kinda management/operational tool
The out of the box default has no security enabled, so you don't need
to worry about configuring anything if you just want to get things
going - just enable the xmpp transport connector in activemq.xml.
If you want to enable some kinda security mechanism, see...
http://activemq.apache.org/security.html
--
James
-------
http://radio.weblogs.com/0112098/