You are viewing a plain text version of this content. The canonical link for it is here.
Posted to c-users@xerces.apache.org by S Verdoold <sv...@gmail.com> on 2006/03/27 11:44:00 UTC
xerces 2.7 configure problem with mingw+msys
I am trying to compile xercesx 2.7 under mingw+msys on a win2000 machine.
Following the build instructions I use
"runConfigure -p mingw-msys"
to configure.
However, this results in the following message:
configure: creating ./config.status
./config.status: line 384: syntax error near unexpected token `\"'
./config.status: line 384: ` "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;'
Exactly the same error I get when I run configure directly and the
same things happen if i try to compile xercesc 2.6.
I think the problem is not with runConfigure but I am not sure.
Did someone succeed in building 2.7 with mingw+msys?
Any hint is highly appreciated!
Sjaak
Re: xerces 2.7 configure problem with mingw+msys
Posted by S Verdoold <sv...@gmail.com>.
Hi Alberto,
I found the problem!!
You were pretty close with your suggestion about the newline characters I think.
The problem seemed to be that I used the source distribution packaged
in a zip file first. It seems that is is necessary to use the tar.gz
file if compiling using mingw+msys. After using that file everything
went pretty smoothly (I did not do any real programming using the
libraries but the tests and samples compile without any problem now)
So the problem wasn't really a problem it seems..
Thanks for the tips!!
Sjaak
2006/3/28, S Verdoold <sv...@gmail.com>:
> Hi Alberto,
> I double checked the newline characters, but as far as I can see at
> this moment I do not have Unix-style newline characters. Maybe my
> mingw/msys installation is screwed up somewhere, I 'll try to check
> that as well.
>
> Sjaak
>
> 2006/3/27, Alberto Massari <am...@datadirect.com>:
> > Hi Sjaak,
> > something strange is going on here: the config.status file that is
> > generated on my system contains this line:
> >
> > CONFIG_FILES=${CONFIG_FILES-"Makefile util/Makefile
> > util/Transcoders/Cygwin/Makefile util/Transcoders/ICU/Makefile
> > util/Transcoders/Iconv/Makefile util/Transcoders/Iconv390/Makefile
> > util/Transcoders/Uniconv390/Makefile
> > util/Transcoders/Iconv400/Makefile
> > util/Transcoders/IconvFBSD/Makefile
> > util/Transcoders/IconvGNU/Makefile
> > util/Transcoders/MacOSUnicodeConverter/Makefile
> > util/Platforms/Makefile util/Platforms/Solaris/Makefile
> > util/Platforms/AIX/Makefile util/Platforms/BeOS/Makefile
> > util/Platforms/QNX/Makefile util/Platforms/Interix/Makefile
> > util/Platforms/Linux/Makefile util/Platforms/FreeBSD/Makefile
> > util/Platforms/NetBSD/Makefile util/Platforms/HPUX/Makefile
> > util/Platforms/OS390/Makefile util/Platforms/OS400/Makefile
> > util/Platforms/IRIX/Makefile util/Platforms/PTX/Makefile
> > util/Platforms/OpenServer/Makefile util/Platforms/UnixWare/Makefile
> > util/Platforms/Tru64/Makefile util/Platforms/MacOS/Makefile
> > util/Platforms/Win32/Makefile util/Platforms/Cygwin/Makefile
> > util/Compilers/Makefile util/MsgLoaders/InMemory/Makefile
> > util/MsgLoaders/ICU/Makefile util/MsgLoaders/ICU/resources/Makefile
> > util/MsgLoaders/MsgCatalog/Makefile util/MsgLoaders/MsgFile/Makefile
> > util/NetAccessors/Socket/Makefile util/NetAccessors/libWWW/Makefile
> > util/NetAccessors/MacOSURLAccessCF/Makefile util/regx/Makefile
> > validators/Makefile validators/common/Makefile
> > validators/datatype/Makefile validators/DTD/Makefile
> > validators/schema/Makefile validators/schema/identity/Makefile
> > framework/Makefile framework/psvi/Makefile dom/Makefile
> > dom/impl/Makefile dom/deprecated/Makefile parsers/Makefile
> > internal/Makefile sax/Makefile sax2/Makefile ../../obj/Makefile"}
> >
> > that is generated by these lines in the "configure" script:
> >
> > CONFIG_FILES=\${CONFIG_FILES-"Makefile \
> > util/Makefile \
> > util/Transcoders/Cygwin/Makefile \
> > util/Transcoders/ICU/Makefile \
> > util/Transcoders/Iconv/Makefile \
> > util/Transcoders/Iconv390/Makefile \
> > util/Transcoders/Uniconv390/Makefile \
> > util/Transcoders/Iconv400/Makefile \
> > util/Transcoders/IconvFBSD/Makefile \
> > util/Transcoders/IconvGNU/Makefile \
> > util/Transcoders/MacOSUnicodeConverter/Makefile \
> > [..]
> >
> > Now, by chance, are you working on files using Unix-style newline
> > characters? Otherwise, I don't see how the '\' at the end of the
> > lines could end up in the generated script.
> >
> > Alberto
> >
Re: xerces 2.7 configure problem with mingw+msys
Posted by S Verdoold <sv...@gmail.com>.
Hi Alberto,
I double checked the newline characters, but as far as I can see at
this moment I do not have Unix-style newline characters. Maybe my
mingw/msys installation is screwed up somewhere, I 'll try to check
that as well.
Sjaak
2006/3/27, Alberto Massari <am...@datadirect.com>:
> Hi Sjaak,
> something strange is going on here: the config.status file that is
> generated on my system contains this line:
>
> CONFIG_FILES=${CONFIG_FILES-"Makefile util/Makefile
> util/Transcoders/Cygwin/Makefile util/Transcoders/ICU/Makefile
> util/Transcoders/Iconv/Makefile util/Transcoders/Iconv390/Makefile
> util/Transcoders/Uniconv390/Makefile
> util/Transcoders/Iconv400/Makefile
> util/Transcoders/IconvFBSD/Makefile
> util/Transcoders/IconvGNU/Makefile
> util/Transcoders/MacOSUnicodeConverter/Makefile
> util/Platforms/Makefile util/Platforms/Solaris/Makefile
> util/Platforms/AIX/Makefile util/Platforms/BeOS/Makefile
> util/Platforms/QNX/Makefile util/Platforms/Interix/Makefile
> util/Platforms/Linux/Makefile util/Platforms/FreeBSD/Makefile
> util/Platforms/NetBSD/Makefile util/Platforms/HPUX/Makefile
> util/Platforms/OS390/Makefile util/Platforms/OS400/Makefile
> util/Platforms/IRIX/Makefile util/Platforms/PTX/Makefile
> util/Platforms/OpenServer/Makefile util/Platforms/UnixWare/Makefile
> util/Platforms/Tru64/Makefile util/Platforms/MacOS/Makefile
> util/Platforms/Win32/Makefile util/Platforms/Cygwin/Makefile
> util/Compilers/Makefile util/MsgLoaders/InMemory/Makefile
> util/MsgLoaders/ICU/Makefile util/MsgLoaders/ICU/resources/Makefile
> util/MsgLoaders/MsgCatalog/Makefile util/MsgLoaders/MsgFile/Makefile
> util/NetAccessors/Socket/Makefile util/NetAccessors/libWWW/Makefile
> util/NetAccessors/MacOSURLAccessCF/Makefile util/regx/Makefile
> validators/Makefile validators/common/Makefile
> validators/datatype/Makefile validators/DTD/Makefile
> validators/schema/Makefile validators/schema/identity/Makefile
> framework/Makefile framework/psvi/Makefile dom/Makefile
> dom/impl/Makefile dom/deprecated/Makefile parsers/Makefile
> internal/Makefile sax/Makefile sax2/Makefile ../../obj/Makefile"}
>
> that is generated by these lines in the "configure" script:
>
> CONFIG_FILES=\${CONFIG_FILES-"Makefile \
> util/Makefile \
> util/Transcoders/Cygwin/Makefile \
> util/Transcoders/ICU/Makefile \
> util/Transcoders/Iconv/Makefile \
> util/Transcoders/Iconv390/Makefile \
> util/Transcoders/Uniconv390/Makefile \
> util/Transcoders/Iconv400/Makefile \
> util/Transcoders/IconvFBSD/Makefile \
> util/Transcoders/IconvGNU/Makefile \
> util/Transcoders/MacOSUnicodeConverter/Makefile \
> [..]
>
> Now, by chance, are you working on files using Unix-style newline
> characters? Otherwise, I don't see how the '\' at the end of the
> lines could end up in the generated script.
>
> Alberto
>
> At 02:50 PM 3/27/2006 +0200, S Verdoold wrote:
> >Hi Alberto,
> >some info about my MSys:
> >MSys: 1.0.10
> >bash: 2.05b.0
> >sed: 3.02
> >
> >Line 384 is basically the first line of a loop so I just post the
> >content of the loop:
> >******** start of loop *********
> >for ac_config_target in $ac_config_targets
> >do
> > case "$ac_config_target" in
> > # Handling of arguments.
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/Cygwin/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/Cygwin/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/ICU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/ICU/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/Iconv/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/Iconv/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/Iconv390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/Iconv390/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/Uniconv390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/Uniconv390/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/Iconv400/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/Iconv400/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/IconvFBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/IconvFBSD/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/IconvGNU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/IconvGNU/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Transcoders/MacOSUnicodeConverter/Makefile" )
> >CONFIG_FILES="$CONFIG_FILES
> >util/Transcoders/MacOSUnicodeConverter/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/Solaris/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/Solaris/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/AIX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/AIX/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/BeOS/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/BeOS/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/QNX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/QNX/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/Linux/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/Linux/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/FreeBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/FreeBSD/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/NetBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/NetBSD/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/HPUX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/HPUX/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/OS390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/OS390/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/OS400/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/OS400/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/IRIX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/IRIX/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/PTX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/PTX/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/OpenServer/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/OpenServer/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/UnixWare/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/UnixWare/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/Tru64/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/Tru64/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/MacOS/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/MacOS/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/Win32/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/Win32/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Platforms/Cygwin/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Platforms/Cygwin/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/Compilers/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/Compilers/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/MsgLoaders/InMemory/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/MsgLoaders/InMemory/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/MsgLoaders/ICU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/MsgLoaders/ICU/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/MsgLoaders/ICU/resources/Makefile" )
> >CONFIG_FILES="$CONFIG_FILES util/MsgLoaders/ICU/resources/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/MsgLoaders/MsgCatalog/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/MsgLoaders/MsgCatalog/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/MsgLoaders/MsgFile/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/MsgLoaders/MsgFile/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/NetAccessors/Socket/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/NetAccessors/Socket/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/NetAccessors/libWWW/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >util/NetAccessors/libWWW/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/NetAccessors/MacOSURLAccessCF/Makefile" )
> >CONFIG_FILES="$CONFIG_FILES
> >util/NetAccessors/MacOSURLAccessCF/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "util/regx/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/regx/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "validators/Makefile" ) CONFIG_FILES="$CONFIG_FILES validators/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "validators/common/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >validators/common/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "validators/datatype/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >validators/datatype/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "validators/DTD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >validators/DTD/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "validators/schema/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >validators/schema/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "validators/schema/identity/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >validators/schema/identity/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "framework/Makefile" ) CONFIG_FILES="$CONFIG_FILES framework/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "framework/psvi/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >framework/psvi/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "dom/Makefile" ) CONFIG_FILES="$CONFIG_FILES dom/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "dom/impl/Makefile" ) CONFIG_FILES="$CONFIG_FILES dom/impl/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "dom/deprecated/Makefile" ) CONFIG_FILES="$CONFIG_FILES
> >dom/deprecated/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "parsers/Makefile" ) CONFIG_FILES="$CONFIG_FILES parsers/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "internal/Makefile" ) CONFIG_FILES="$CONFIG_FILES internal/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "sax/Makefile" ) CONFIG_FILES="$CONFIG_FILES sax/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "sax2/Makefile" ) CONFIG_FILES="$CONFIG_FILES sax2/Makefile" ;;
> > "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> > "../../obj/Makefile" ) CONFIG_FILES="$CONFIG_FILES ../../obj/Makefile" ;;
> > *) { { echo "$as_me:$LINENO: error: invalid argument:
> > $ac_config_target" >&5
> >echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
> > { (exit 1); exit 1; }; };;
> > esac
> >done
> >********** end of loop **********
> >
> >Hopefully this make things a bit more clear (I am sorry for the length
> >of posting)
> >Thanks a lot already!
> >
> >Sjaak
> >
> >
> >2006/3/27, Alberto Massari <am...@datadirect.com>:
> > > Hi Sjaak,
> > > I am able to compile using MinGW+MSys on Windows XP; given the type
> > > of error, I would guess the fault could be in an older version of
> > > some of the Unix tools (sed or bash, I would guess).
> > > Can you post the lines around line 384 of config.status that has been
> > > generated, along with the version of MSys and sed you are using?
> > >
> > > Thanks,
> > > Alberto
> > >
> > > At 11:44 AM 3/27/2006 +0200, S Verdoold wrote:
> > > >I am trying to compile xercesx 2.7 under mingw+msys on a win2000 machine.
> > > >Following the build instructions I use
> > > >"runConfigure -p mingw-msys"
> > > >to configure.
> > > >However, this results in the following message:
> > > >
> > > >configure: creating ./config.status
> > > >./config.status: line 384: syntax error near unexpected token `\"'
> > > >./config.status: line 384: ` "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;'
> > > >
> > > >Exactly the same error I get when I run configure directly and the
> > > >same things happen if i try to compile xercesc 2.6.
> > > >I think the problem is not with runConfigure but I am not sure.
> > > >Did someone succeed in building 2.7 with mingw+msys?
> > > >
> > > >Any hint is highly appreciated!
> > > >
> > > >Sjaak
> > >
> > >
>
>
Re: xerces 2.7 configure problem with mingw+msys
Posted by Alberto Massari <am...@datadirect.com>.
Hi Sjaak,
something strange is going on here: the config.status file that is
generated on my system contains this line:
CONFIG_FILES=${CONFIG_FILES-"Makefile util/Makefile
util/Transcoders/Cygwin/Makefile util/Transcoders/ICU/Makefile
util/Transcoders/Iconv/Makefile util/Transcoders/Iconv390/Makefile
util/Transcoders/Uniconv390/Makefile
util/Transcoders/Iconv400/Makefile
util/Transcoders/IconvFBSD/Makefile
util/Transcoders/IconvGNU/Makefile
util/Transcoders/MacOSUnicodeConverter/Makefile
util/Platforms/Makefile util/Platforms/Solaris/Makefile
util/Platforms/AIX/Makefile util/Platforms/BeOS/Makefile
util/Platforms/QNX/Makefile util/Platforms/Interix/Makefile
util/Platforms/Linux/Makefile util/Platforms/FreeBSD/Makefile
util/Platforms/NetBSD/Makefile util/Platforms/HPUX/Makefile
util/Platforms/OS390/Makefile util/Platforms/OS400/Makefile
util/Platforms/IRIX/Makefile util/Platforms/PTX/Makefile
util/Platforms/OpenServer/Makefile util/Platforms/UnixWare/Makefile
util/Platforms/Tru64/Makefile util/Platforms/MacOS/Makefile
util/Platforms/Win32/Makefile util/Platforms/Cygwin/Makefile
util/Compilers/Makefile util/MsgLoaders/InMemory/Makefile
util/MsgLoaders/ICU/Makefile util/MsgLoaders/ICU/resources/Makefile
util/MsgLoaders/MsgCatalog/Makefile util/MsgLoaders/MsgFile/Makefile
util/NetAccessors/Socket/Makefile util/NetAccessors/libWWW/Makefile
util/NetAccessors/MacOSURLAccessCF/Makefile util/regx/Makefile
validators/Makefile validators/common/Makefile
validators/datatype/Makefile validators/DTD/Makefile
validators/schema/Makefile validators/schema/identity/Makefile
framework/Makefile framework/psvi/Makefile dom/Makefile
dom/impl/Makefile dom/deprecated/Makefile parsers/Makefile
internal/Makefile sax/Makefile sax2/Makefile ../../obj/Makefile"}
that is generated by these lines in the "configure" script:
CONFIG_FILES=\${CONFIG_FILES-"Makefile \
util/Makefile \
util/Transcoders/Cygwin/Makefile \
util/Transcoders/ICU/Makefile \
util/Transcoders/Iconv/Makefile \
util/Transcoders/Iconv390/Makefile \
util/Transcoders/Uniconv390/Makefile \
util/Transcoders/Iconv400/Makefile \
util/Transcoders/IconvFBSD/Makefile \
util/Transcoders/IconvGNU/Makefile \
util/Transcoders/MacOSUnicodeConverter/Makefile \
[..]
Now, by chance, are you working on files using Unix-style newline
characters? Otherwise, I don't see how the '\' at the end of the
lines could end up in the generated script.
Alberto
At 02:50 PM 3/27/2006 +0200, S Verdoold wrote:
>Hi Alberto,
>some info about my MSys:
>MSys: 1.0.10
>bash: 2.05b.0
>sed: 3.02
>
>Line 384 is basically the first line of a loop so I just post the
>content of the loop:
>******** start of loop *********
>for ac_config_target in $ac_config_targets
>do
> case "$ac_config_target" in
> # Handling of arguments.
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/Cygwin/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/Cygwin/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/ICU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/ICU/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/Iconv/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/Iconv/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/Iconv390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/Iconv390/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/Uniconv390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/Uniconv390/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/Iconv400/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/Iconv400/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/IconvFBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/IconvFBSD/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/IconvGNU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/IconvGNU/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Transcoders/MacOSUnicodeConverter/Makefile" )
>CONFIG_FILES="$CONFIG_FILES
>util/Transcoders/MacOSUnicodeConverter/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/Solaris/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/Solaris/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/AIX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/AIX/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/BeOS/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/BeOS/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/QNX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/QNX/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/Linux/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/Linux/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/FreeBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/FreeBSD/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/NetBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/NetBSD/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/HPUX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/HPUX/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/OS390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/OS390/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/OS400/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/OS400/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/IRIX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/IRIX/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/PTX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/PTX/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/OpenServer/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/OpenServer/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/UnixWare/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/UnixWare/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/Tru64/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/Tru64/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/MacOS/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/MacOS/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/Win32/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/Win32/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Platforms/Cygwin/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Platforms/Cygwin/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/Compilers/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/Compilers/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/MsgLoaders/InMemory/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/MsgLoaders/InMemory/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/MsgLoaders/ICU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/MsgLoaders/ICU/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/MsgLoaders/ICU/resources/Makefile" )
>CONFIG_FILES="$CONFIG_FILES util/MsgLoaders/ICU/resources/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/MsgLoaders/MsgCatalog/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/MsgLoaders/MsgCatalog/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/MsgLoaders/MsgFile/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/MsgLoaders/MsgFile/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/NetAccessors/Socket/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/NetAccessors/Socket/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/NetAccessors/libWWW/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>util/NetAccessors/libWWW/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/NetAccessors/MacOSURLAccessCF/Makefile" )
>CONFIG_FILES="$CONFIG_FILES
>util/NetAccessors/MacOSURLAccessCF/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "util/regx/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/regx/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "validators/Makefile" ) CONFIG_FILES="$CONFIG_FILES validators/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "validators/common/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>validators/common/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "validators/datatype/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>validators/datatype/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "validators/DTD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>validators/DTD/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "validators/schema/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>validators/schema/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "validators/schema/identity/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>validators/schema/identity/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "framework/Makefile" ) CONFIG_FILES="$CONFIG_FILES framework/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "framework/psvi/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>framework/psvi/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "dom/Makefile" ) CONFIG_FILES="$CONFIG_FILES dom/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "dom/impl/Makefile" ) CONFIG_FILES="$CONFIG_FILES dom/impl/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "dom/deprecated/Makefile" ) CONFIG_FILES="$CONFIG_FILES
>dom/deprecated/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "parsers/Makefile" ) CONFIG_FILES="$CONFIG_FILES parsers/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "internal/Makefile" ) CONFIG_FILES="$CONFIG_FILES internal/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "sax/Makefile" ) CONFIG_FILES="$CONFIG_FILES sax/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "sax2/Makefile" ) CONFIG_FILES="$CONFIG_FILES sax2/Makefile" ;;
> "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
> "../../obj/Makefile" ) CONFIG_FILES="$CONFIG_FILES ../../obj/Makefile" ;;
> *) { { echo "$as_me:$LINENO: error: invalid argument:
> $ac_config_target" >&5
>echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
> { (exit 1); exit 1; }; };;
> esac
>done
>********** end of loop **********
>
>Hopefully this make things a bit more clear (I am sorry for the length
>of posting)
>Thanks a lot already!
>
>Sjaak
>
>
>2006/3/27, Alberto Massari <am...@datadirect.com>:
> > Hi Sjaak,
> > I am able to compile using MinGW+MSys on Windows XP; given the type
> > of error, I would guess the fault could be in an older version of
> > some of the Unix tools (sed or bash, I would guess).
> > Can you post the lines around line 384 of config.status that has been
> > generated, along with the version of MSys and sed you are using?
> >
> > Thanks,
> > Alberto
> >
> > At 11:44 AM 3/27/2006 +0200, S Verdoold wrote:
> > >I am trying to compile xercesx 2.7 under mingw+msys on a win2000 machine.
> > >Following the build instructions I use
> > >"runConfigure -p mingw-msys"
> > >to configure.
> > >However, this results in the following message:
> > >
> > >configure: creating ./config.status
> > >./config.status: line 384: syntax error near unexpected token `\"'
> > >./config.status: line 384: ` "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;'
> > >
> > >Exactly the same error I get when I run configure directly and the
> > >same things happen if i try to compile xercesc 2.6.
> > >I think the problem is not with runConfigure but I am not sure.
> > >Did someone succeed in building 2.7 with mingw+msys?
> > >
> > >Any hint is highly appreciated!
> > >
> > >Sjaak
> >
> >
Re: xerces 2.7 configure problem with mingw+msys
Posted by S Verdoold <sv...@gmail.com>.
Hi Alberto,
some info about my MSys:
MSys: 1.0.10
bash: 2.05b.0
sed: 3.02
Line 384 is basically the first line of a loop so I just post the
content of the loop:
******** start of loop *********
for ac_config_target in $ac_config_targets
do
case "$ac_config_target" in
# Handling of arguments.
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/Cygwin/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/Cygwin/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/ICU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/ICU/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/Iconv/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/Iconv/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/Iconv390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/Iconv390/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/Uniconv390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/Uniconv390/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/Iconv400/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/Iconv400/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/IconvFBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/IconvFBSD/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/IconvGNU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Transcoders/IconvGNU/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Transcoders/MacOSUnicodeConverter/Makefile" )
CONFIG_FILES="$CONFIG_FILES
util/Transcoders/MacOSUnicodeConverter/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/Solaris/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/Solaris/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/AIX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/AIX/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/BeOS/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/BeOS/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/QNX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/QNX/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/Linux/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/Linux/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/FreeBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/FreeBSD/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/NetBSD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/NetBSD/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/HPUX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/HPUX/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/OS390/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/OS390/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/OS400/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/OS400/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/IRIX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/IRIX/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/PTX/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/PTX/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/OpenServer/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/OpenServer/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/UnixWare/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/UnixWare/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/Tru64/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/Tru64/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/MacOS/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/MacOS/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/Win32/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/Win32/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Platforms/Cygwin/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Platforms/Cygwin/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/Compilers/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/Compilers/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/MsgLoaders/InMemory/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/MsgLoaders/InMemory/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/MsgLoaders/ICU/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/MsgLoaders/ICU/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/MsgLoaders/ICU/resources/Makefile" )
CONFIG_FILES="$CONFIG_FILES util/MsgLoaders/ICU/resources/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/MsgLoaders/MsgCatalog/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/MsgLoaders/MsgCatalog/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/MsgLoaders/MsgFile/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/MsgLoaders/MsgFile/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/NetAccessors/Socket/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/NetAccessors/Socket/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/NetAccessors/libWWW/Makefile" ) CONFIG_FILES="$CONFIG_FILES
util/NetAccessors/libWWW/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/NetAccessors/MacOSURLAccessCF/Makefile" )
CONFIG_FILES="$CONFIG_FILES
util/NetAccessors/MacOSURLAccessCF/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"util/regx/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/regx/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"validators/Makefile" ) CONFIG_FILES="$CONFIG_FILES validators/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"validators/common/Makefile" ) CONFIG_FILES="$CONFIG_FILES
validators/common/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"validators/datatype/Makefile" ) CONFIG_FILES="$CONFIG_FILES
validators/datatype/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"validators/DTD/Makefile" ) CONFIG_FILES="$CONFIG_FILES
validators/DTD/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"validators/schema/Makefile" ) CONFIG_FILES="$CONFIG_FILES
validators/schema/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"validators/schema/identity/Makefile" ) CONFIG_FILES="$CONFIG_FILES
validators/schema/identity/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"framework/Makefile" ) CONFIG_FILES="$CONFIG_FILES framework/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"framework/psvi/Makefile" ) CONFIG_FILES="$CONFIG_FILES
framework/psvi/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"dom/Makefile" ) CONFIG_FILES="$CONFIG_FILES dom/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"dom/impl/Makefile" ) CONFIG_FILES="$CONFIG_FILES dom/impl/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"dom/deprecated/Makefile" ) CONFIG_FILES="$CONFIG_FILES
dom/deprecated/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"parsers/Makefile" ) CONFIG_FILES="$CONFIG_FILES parsers/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"internal/Makefile" ) CONFIG_FILES="$CONFIG_FILES internal/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"sax/Makefile" ) CONFIG_FILES="$CONFIG_FILES sax/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"sax2/Makefile" ) CONFIG_FILES="$CONFIG_FILES sax2/Makefile" ;;
"\" ) CONFIG_FILES="$CONFIG_FILES \" ;;
"../../obj/Makefile" ) CONFIG_FILES="$CONFIG_FILES ../../obj/Makefile" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
********** end of loop **********
Hopefully this make things a bit more clear (I am sorry for the length
of posting)
Thanks a lot already!
Sjaak
2006/3/27, Alberto Massari <am...@datadirect.com>:
> Hi Sjaak,
> I am able to compile using MinGW+MSys on Windows XP; given the type
> of error, I would guess the fault could be in an older version of
> some of the Unix tools (sed or bash, I would guess).
> Can you post the lines around line 384 of config.status that has been
> generated, along with the version of MSys and sed you are using?
>
> Thanks,
> Alberto
>
> At 11:44 AM 3/27/2006 +0200, S Verdoold wrote:
> >I am trying to compile xercesx 2.7 under mingw+msys on a win2000 machine.
> >Following the build instructions I use
> >"runConfigure -p mingw-msys"
> >to configure.
> >However, this results in the following message:
> >
> >configure: creating ./config.status
> >./config.status: line 384: syntax error near unexpected token `\"'
> >./config.status: line 384: ` "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;'
> >
> >Exactly the same error I get when I run configure directly and the
> >same things happen if i try to compile xercesc 2.6.
> >I think the problem is not with runConfigure but I am not sure.
> >Did someone succeed in building 2.7 with mingw+msys?
> >
> >Any hint is highly appreciated!
> >
> >Sjaak
>
>
Re: xerces 2.7 configure problem with mingw+msys
Posted by Alberto Massari <am...@datadirect.com>.
Hi Sjaak,
I am able to compile using MinGW+MSys on Windows XP; given the type
of error, I would guess the fault could be in an older version of
some of the Unix tools (sed or bash, I would guess).
Can you post the lines around line 384 of config.status that has been
generated, along with the version of MSys and sed you are using?
Thanks,
Alberto
At 11:44 AM 3/27/2006 +0200, S Verdoold wrote:
>I am trying to compile xercesx 2.7 under mingw+msys on a win2000 machine.
>Following the build instructions I use
>"runConfigure -p mingw-msys"
>to configure.
>However, this results in the following message:
>
>configure: creating ./config.status
>./config.status: line 384: syntax error near unexpected token `\"'
>./config.status: line 384: ` "\" ) CONFIG_FILES="$CONFIG_FILES \" ;;'
>
>Exactly the same error I get when I run configure directly and the
>same things happen if i try to compile xercesc 2.6.
>I think the problem is not with runConfigure but I am not sure.
>Did someone succeed in building 2.7 with mingw+msys?
>
>Any hint is highly appreciated!
>
>Sjaak