Apache 2.0.35 with Win2kPro - PHP Module Issue - Please Help ASAP!

[Daniel Gaddy <dg...@sparctech.com>]

Hello again,

I have posted this message now twice to this board, and the need of it getting resolved has grown greatly... I have had several contributors to this post, but no one is yet to determine the actual cause/fix for it, and I have been told to escalate this as needed... I will fully explain what is going on, and if anyone knows what needs to be specifically done for Apache 2.0.36 and the PHP module, that would be great, as the only documentation I have is for the 1.x versions of Apache... Where I currently stand is after troubleshooting thoroughly, I have actually gotten Apache to start with the key entires in httpd.conf... It SAYS that it loads the module on the Apache Monitor, however, if I try to run a PHP file from under the apache document root for one of our domains, it TRIES to open the file, and you know it sees the file, (obviously or it would say file not found), but due to a misconfiguration SOMEWHERE, whether that is php.ini, the location of .dll files, httpd.conf, or whatever the case, it simply will NOT load the .php file.  It will never time out, and never display any messages on why it didnt open the file, but will continue to show a status bar at the bottom of the page like it IS trying to open it... Something is certainly wrong... I have attempted to enable logging through php.ini, but the file I tell php.ini to create and keep logs in never gets created... It is almost like the system is not finding that file... I have the php.ini file in C:\Winnt, in C:\Winnt\System32, and in the folder that hosts php.exe, which is C:\PHP_4.2.1... I found no information truly helpful in the apache logs either... I will include the entire current httpd.conf file and the entire php.ini file... If anyone that is aware of any way this could be resolved is willing to assist me, I would certainly appreciate it greatly... Again, let me reitterate that this is running on Apache 2.0.35, and ALL of the documentation I have found, as well as others have pointed me to has been for 1.x, and there may be some undocumented difference that needs to be done that is stopping me... If all else fails, due to the speed at which this needs to be resolved, I have VNC as an option if anyone is willing to assist remotely... Listed below in this respected order is httpd.conf, and php.ini... If I can provide ANY other information whatsoever, do not hesitate to ask!

Thank you all for your assistance...


HTTPD.CONF
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs-2.0/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "C:/Program Files/Apache Group/Apache2"

#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#
#ScoreBoardFile logs/apache_runtime_status

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile logs/httpd.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild  0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 24.242.177.229:80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule perl_module modules/mod_perl.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule php4_module C:/PHP_4.2.1/sapi/php4apache2.dll

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin postmaster@technalithics.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make 
# redirections work in a sensible way.
#
ServerName www.technalithics.com

#
# UseCanonicalName: Determines how Apache constructs self-referencing 
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName On

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/webserver/webs"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/webserver/webs">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
#
    Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.  Be especially careful to use
# proper, forward slashes here.
#
#UserDir "My Documents/My Website"

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the 
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var index.htm default.htm index.php index.php3

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.  See also the AllowOverride directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig conf/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the 
# realname must also be slash terminated, and if the fakename omits the 
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"

<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# This should be changed to the ServerRoot/manual/.  The alias provides
# the manual, even if you choose to move your DocumentRoot.  You may comment
# this out if you do not care for the documentation.
#
Alias /manual "C:/Program Files/Apache Group/Apache2/manual"

<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes FollowSymLinks MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"

#ScriptAlias /php4/ "C:/PHP_4.2.1/"
AddHandler application/x-httpd-php4 .php
#AddHandler application/x-httpd-php4 .php3
#Action application/x-httpd-php4 "/php4/php.exe"
#
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:\Program Files\Apache Group\Apache2\cgi-bin">
    AllowOverride None
    Options +ExecCGI
    Order allow,deny
    Allow from all
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# FancyIndexing is whether you want fancy directory indexing or standard.
# VersionSort is whether files containing version numbers should be 
# compared in the natural way, so that `apache-1.3.9.tar' is placed before
# `apache-1.3.12.tar'.
#
IndexOptions FancyIndexing VersionSort

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes. 
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# DefaultLanguage and AddLanguage allows you to specify the language of 
# a document. You can then use content negotiation to give a browser a 
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will 
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as 
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases 
# the two character 'Language' abbreviation is not identical to 
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (kr)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru) - Croatian (hr)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage he .he
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage kr .kr
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
AddLanguage hr .hr

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ltz ca es sv tw

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
AddDefaultCharset ISO-8859-1

#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
# the official list of charset names and their respective RFCs
#
AddCharset ISO-8859-1  .iso8859-1 .latin1
AddCharset ISO-8859-2  .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3  .iso8859-3 .latin3
AddCharset ISO-8859-4  .iso8859-4 .latin4
AddCharset ISO-8859-5  .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6  .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7  .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8  .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9  .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5        .Big5       .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251   .win-1251
AddCharset CP866       .cp866
AddCharset KOI8-r      .koi8-r .koi8-ru
AddCharset KOI8-ru     .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8       .utf8

# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
# for a list of sorts. But browsers support few.
#
AddCharset GB2312      .gb2312 .gb 
AddCharset utf-7       .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
AddType application/x-tar .tgz
AddType application/x-httpd-php .php .phtml
AddType application/x-httpd-php-source .phps

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler cgi-script .cgi .pl .exe

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For server-parsed imagemap files:
#
#AddHandler imap-file map

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
AddHandler type-map var

# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can Internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use 
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line;
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# C:/Program Files/Apache Group/Apache2/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
    Alias /error/ "C:/Program Files/Apache Group/Apache2/error/"

    <Directory "C:/Program Files/Apache Group/Apache2/error">
        AllowOverride None
        Options IncludesNoExec
        AddOutputFilter Includes html
        AddHandler type-map var
        Order allow,deny
        Allow from all
        LanguagePriority en es de fr
        ForceLanguagePriority Prefer Fallback
    </Directory>

    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    ErrorDocument 410 /error/HTTP_GONE.html.var
    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a 
# problem with Microsoft WebFolders which does not appropriately handle 
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".24.242.177.229" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .24.242.177.229
#</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .24.242.177.229
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
#    Order deny,allow
#    Deny from all
#    Allow from .your-domain.com
#</Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "C:/Program Files/Apache Group/Apache2/proxy"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.

#
# Bring in additional module-specific configurations
#
#<IfModule mod_ssl.c>
#    Include conf/ssl.conf
#</IfModule>


### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *

NameVirtualHost 24.242.177.229

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/technalithics
ServerName www.technalithics.com
ServerAlias technalithics.com
</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/sparctech
ServerName www.sparctech.com
ServerAlias sparctech.com
</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/rover-phd
ServerName www.rover-phd.com
ServerAlias rover-phd.com
</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/onewirenet
ServerName www.onewirenet.com
ServerAlias onewirenet.com
</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/jailcontrols
ServerName www.jailcontrols.com
ServerAlias jailcontrols.com
</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/sparctech/llano
ServerName www.sparctech.com/llano
ServerAlias sparctech.com/llano
</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/onewirenet/wacosailclub
ServerName www.onewirenet.com/wacosailclub
ServerAlias onewirenet.com/wacosailclub
</VirtualHost>

<VirtualHost 24.242.177.229>
ServerAdmin postmaster@technalithics.com
DocumentRoot c:/webserver/webs/onewirenet/bestpractices
ServerName www.onewirenet.com/bestpractices
ServerAlias onewirenet.com/bestpractices
</VirtualHost>


PHP.INI
[PHP]

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
;
; This is the recommended, PHP 4-style version of the php.ini-dist file.  It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with.  Using this
; file is warmly recommended for production sites.  As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
;
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
;
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP 3.  Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
;
; - register_globals = Off         [Security, Performance]
;     Global variables are no longer registered for input data (POST, GET, cookies,
;     environment and other server variables).  Instead of using $foo, you must use
;     you can use $_REQUEST["foo"] (includes any variable that arrives through the
;     request, namely, POST, GET and cookie variables), or use one of the specific
;     $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
;     on where the input originates.  Also, you can look at the
;     import_request_variables() function.
;     Note that register_globals is going to be depracated (i.e., turned off by
;     default) in the next version of PHP, because it often leads to security bugs.
;     Read http://php.net/manual/en/security.registerglobals.php for further
;     information.
; - display_errors = Off           [Security]
;     With this directive set to off, errors that occur during the execution of
;     scripts will no longer be displayed as a part of the script output, and thus,
;     will no longer be exposed to remote users.  With some errors, the error message
;     content may expose information about your script, web server, or database
;     server that may be exploitable for hacking.  Production sites should have this
;     directive set to off.
; - log_errors = On                [Security]
;     This directive complements the above one.  Any errors that occur during the
;     execution of your script will be logged (typically, to your server's error log,
;     but can be configured in several ways).  Along with setting display_errors to off,
;     this setup gives you the ability to fully understand what may have gone wrong,
;     without exposing any sensitive information to remote users.
; - output_buffering = 4096        [Performance]
;     Set a 4KB output buffer.  Enabling output buffering typically results in less
;     writes, and sometimes less packets sent on the wire, which can often lead to
;     better performance.  The gain this directive actually yields greatly depends
;     on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off       [Performance]
;     Disables registration of the somewhat redundant $argv and $argc global
;     variables.
; - magic_quotes_gpc = Off         [Performance]
;     Input data is no longer escaped with slashes so that it can be sent into
;     SQL databases without further manipulation.  Instead, you should use the
;     function addslashes() on each input element you wish to send to a database.
; - variables_order = "GPCS"       [Performance]
;     The environment variables are not hashed into the $HTTP_ENV_VARS[].  To access
;     environment variables, you can use getenv() instead.
; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
;     By default, PHP surpresses errors of type E_NOTICE.  These error messages
;     are emitted for non-critical errors, but that could be a symptom of a bigger
;     problem.  Most notably, this will cause error messages about the use
;     of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off     [Code cleanliness]
;     It's not possible to decide to force a variable to be passed by reference
;     when calling a function.  The PHP 4 style to do this is by making the
;     function require the relevant argument by reference.


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.
short_open_tag = On

; Allow ASP-style <% %> tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision    =  14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = Off

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit.  You can enable output buffering during runtime by calling the output
; buffering functions.  You can also enable output buffering for all files by
; setting this directive to On.  If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "ob_gzhandler", output will be
; transparently compressed for browsers that support gzip or deflate encoding.
; Setting an output handler automatically turns on output buffering.
output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
;
; Note: output_handler must be empty if this is set 'On' !!!!
;
zlib.output_compression = Off

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; Whether to enable the ability to force arguments to be passed by reference
; at function call time.  This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend.  The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration.  You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = Off

;
; Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =        

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file.
;
;open_basedir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here.  By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note:  If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv().  These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names.  This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <font color="??????"> would work.
highlight.string  = #CC0000
highlight.comment = #FF9900
highlight.keyword = #006600
highlight.bg      = #FFFFFF
highlight.default = #0000CC
highlight.html    = #000000


;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header).  It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 30     ; Maximum execution time of each script, in seconds
memory_limit = 8M      ; Maximum amount of memory a script may consume (8MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field.  Or each number up to get desired error
; reporting level
; E_ALL             - All errors and warnings
; E_ERROR           - fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often result
;                     from a bug in your code, but it's possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     relying on the fact it's automatically initialized to an
;                     empty string)
; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
;
; Examples:
;
;   - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE
;
;   - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors
;
error_reporting  =  E_ALL

; Print out errors (as a part of the output).  For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below).  Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = on

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed.  It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = on

; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
;html_errors = Off
  
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"

; String to output after an error message.
;error_append_string = "</font>"

; Log errors to specified file.
error_log = PHPErrorLog

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
error_log = syslog

; Warn if the + operator is used with strings.
warn_plus_overloading = Off


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&". 
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&". 
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC).  Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"

; Whether or not to register the EGPCS variables as global variables.  You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data.  This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on;  Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information).  If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = Off

; Maximum size of POST data that PHP will accept.
post_max_size = 8M

; This directive is deprecated.  Use variables_order instead.
gpc_order = "GPC"

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off    

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header.  To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.                               
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"  
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues.  The alternate is to use the
; cgi.force_redirect configuration below
doc_root = 

; The directory under which PHP opens the script using /~usernamem used only
; if nonempty.
user_dir =

; Directory in which the loadable extensions (modules) reside.
extension_dir = c:\PHP_4.2.1\extensions

; Whether or not to enable the dl() function.  The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers.  Left undefined, PHP turns this on by default.  You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution.  Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;



;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
upload_max_filesize = 2M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Define the anonymous ftp password (your email address)
;from="john@doe.com"


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
;   extension=modulename.extension
;
; For example, on Windows:
;
;   extension=msql.dll
;
; ... or under UNIX:
;
;   extension=msql.so
;
; Note that it should be the name of the module only; no directory information 
; needs to go here.  Specify the location of the extension with the
; extension_dir directive above.


;Windows Extensions
;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
;
;extension=php_bz2.dll
;extension=php_ctype.dll
;extension=php_cpdf.dll
;extension=php_curl.dll
;extension=php_cybercash.dll
;extension=php_db.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_domxml.dll
;extension=php_dotnet.dll
;extension=php_exif.dll
;extension=php_fbsql.dll
;extension=php_fdf.dll
;extension=php_filepro.dll
;extension=php_gd.dll
;extension=php_gettext.dll
;extension=php_hyperwave.dll
;extension=php_iconv.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imap.dll
;extension=php_ingres.dll
;extension=php_interbase.dll
;extension=php_java.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_oracle.dll
;extension=php_pdf.dll
;extension=php_pgsql.dll
;extension=php_printer.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_sockets.dll
;extension=php_sybase_ct.dll
;extension=php_tokenizer.dll
;extension=php_w32api.dll
;extension=php_xslt.dll
;extension=php_yaz.dll
;extension=php_zlib.dll


;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables  = Off

[mail function]
; For Win32 only.
SMTP = mail.technalithics.com

; For Win32 only.
sendmail_from = hostmaster@technalithics.com

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =

[Java]
;java.class.path = .\php_java.jar
;java.home = c:\jdk
;java.library = c:\jdk\jre\bin\hotspot\jvm.dll 
;java.library.path = .\

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db    =  Not yet implemented
;odbc.default_user  =  Not yet implemented
;odbc.default_pw    =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
odbc.max_links = -1  

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096  

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1  

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo cfg_get_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
msql.max_links = -1

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect(). Need a little overhead.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
pgsql.max_links = -1

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings.  This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns.  May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1.  In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler.  In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this 
; variable in order to use PHP's session functions.
session.save_path = /tmp

; Whether to use cookies.
session.use_cookies = 1


; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Handler used to serialize data.  php is the standard serializer of PHP.
session.serialize_handler = php

; Percentual probability that the 'garbage collection' process is started
; on every session initialization.
session.gc_probability = 1

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public} to determine HTTP caching aspects.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; use transient sid support if enabled by compiling with --enable-trans-sid.
session.use_trans_sid = 1

url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch.  0 = all records in one batch.
;mssql.batchsize = 0

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with current error_reporting().  Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ingres.max_persistent = -1

; Maximum number of links, including persistents.  -1 means no limit.
ingres.max_links = -1

; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =

; Default user.
ingres.default_user =

; Default password.
ingres.default_password =

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport = 443

; Default timeout in seconds.
pfpro.defaulttimeout = 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =

; Default proxy port.
;pfpro.proxyport =

; Default proxy logon.
;pfpro.proxylogon =

; Default proxy password.
;pfpro.proxypassword =

[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On

[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file = 
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true

[Printer]
;printer.default_printer = ""

[mbstring]
;mbstring.internal_encoding = EUC-JP
;mbstring.http_input = auto
;mbstring.http_output = SJIS
;mbstring.detect_order = auto
;mbstring.substitute_character = none;

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database = 
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000

; Local Variables:
; tab-width: 4
; End:


Thanks again for any help you can provide...

Daniel Gaddy

Re: Apache 2.0.35 with Win2kPro - PHP Module Issue - Please Help ASAP!

[Joshua Slive <jo...@slive.ca>]

On Mon, 10 Jun 2002, Daniel Gaddy wrote:

> Hello again,
>
> I have posted this message now twice to this board, and the need of it
> getting resolved has grown greatly...

[Another 200k of junk, posted in text and duplicated in html, deleted.]

OK.  That's it.  PLEASE STOP POSTING HERE!  I can ban you from this list
if necessary, but I'd appreciate it if you would take it upon yourself to
find someplace else to have your problem solved.

I understand that you are simply an inexperienced user trying to get a
problem solved, but you have shown absolutely no understanding for the
basic etiquette of mailing lists.  If you are truly desperate to get your
problem solved, please consider hiring a professional to help you.  This
list is for user-to-user discussion.

If you choose to post to another mailing list, I suggest you start by
reading this all the way through first:
http://www.tuxedo.org/~esr/faqs/smart-questions.html

Joshua.


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org