You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by "Naderi, Sascha" <SN...@datus.com> on 2013/05/17 16:29:42 UTC
SIP Pin for conference room in OM 2.1
Dear all,
I have a question concerning openmeetings 2.1 sip integration.
The configuration of a conference room has the setting for the conference sip number and sip pin. The helptext says that both are automatically created via OpenXG RPC-Gateway. In my case the sip number is created but never a sip pin.
How can i get a sip pin working for the conference room?
Best regards
Sascha
AW: SIP Pin for conference room in OM 2.1
Posted by "Naderi, Sascha" <SN...@datus.com>.
...ok, thanks!
Regards
Sascha
________________________________
Von: Maxim Solodovnik [solomax666@gmail.com]
Gesendet: Dienstag, 21. Mai 2013 13:59
Bis: Openmeetings user-list
Betreff: Re: SIP Pin for conference room in OM 2.1
I'm afraid you should reconfigure according to the 2.1 guide, since otherwise integration is not going to work :(
On Tue, May 21, 2013 at 6:16 PM, Naderi, Sascha <SN...@datus.com>> wrote:
Dear Maxim,
thanks for the hint. Could you please specify it a bit more. I can not find where I could possibly have disabled it.
I am using apache-openmeetings-2.1.0.r1443823-08-02-2013_0219´
I have checked the configuration settings in the GUI "Manage system settings" and there doesn´t seem to be anything according.
My sip integration does not match with the latest description http://openmeetings.apache.org/red5sip-integration_2.1.html. It must be from an older one. It does not have the confbridge.
Best regards
Sascha
________________________________
Von: Maxim Solodovnik [solomax666@gmail.com<ma...@gmail.com>]
Gesendet: Freitag, 17. Mai 2013 18:43
Bis: Openmeetings user-list
Betreff: Re: SIP Pin for conference room in OM 2.1
Maybe you have disabled in the system?
On Fri, May 17, 2013 at 9:54 PM, Naderi, Sascha <SN...@datus.com>> wrote:
Dear Alexei,
thank you for your reply. Any idea how a sip pin can be set?
If I try to configure one in the according field of the conference room, it is never kept after saving. Instead the field is blank again.
Regards
Sascha
________________________________________
Von: Alexei Fedotov [alexei.fedotov@gmail.com<ma...@gmail.com>]
Gesendet: Freitag, 17. Mai 2013 16:31
Bis: user@openmeetings.apache.org<ma...@openmeetings.apache.org>
Betreff: Re: SIP Pin for conference room in OM 2.1
Hello Sascha,
The current SIP implementation does not use OpenXG RPC-Gateway, it uses Asterisk
--
With best regards / с наилучшими пожеланиями,
Alexei Fedotov / Алексей Федотов,
http://dataved.ru/
+7 916 562 8095
On Fri, May 17, 2013 at 6:29 PM, Naderi, Sascha <SN...@datus.com>> wrote:
> Dear all,
>
>
>
>
>
> I have a question concerning openmeetings 2.1 sip integration.
>
> The configuration of a conference room has the setting for the conference
> sip number and sip pin. The helptext says that both are automatically
> created via OpenXG RPC-Gateway. In my case the sip number is created but
> never a sip pin.
>
> How can i get a sip pin working for the conference room?
>
>
>
>
>
> Best regards
>
> Sascha
>
>
--
WBR
Maxim aka solomax
--
WBR
Maxim aka solomax
Re: SIP Pin for conference room in OM 2.1
Posted by Maxim Solodovnik <so...@gmail.com>.
I'm afraid you should reconfigure according to the 2.1 guide, since
otherwise integration is not going to work :(
On Tue, May 21, 2013 at 6:16 PM, Naderi, Sascha <SN...@datus.com> wrote:
> Dear Maxim, ** ****
>
> ****
>
> ****
>
> thanks for the hint. Could you please specify it a bit more. I can not
> find where I could possibly have disabled it.****
>
> I am using apache-openmeetings-2.1.0.r1443823-08-02-2013_0219´****
>
> I have checked the configuration settings in the GUI "Manage systemsettings
> " and there doesn´t seem to be anything according.
>
> My sip integration does *not *match with the latest description
> http://openmeetings.apache.org/red5sip-integration_2.1.html. It must be
> from an older one. It does not have the confbridge.****
>
> ****
>
> Best regards****
>
> Sascha ****
>
> ------------------------------
>
> *Von:* Maxim Solodovnik [solomax666@gmail.com]
> *Gesendet:* Freitag, 17. Mai 2013 18:43
> *Bis:* Openmeetings user-list
> *Betreff:* Re: SIP Pin for conference room in OM 2.1
>
> Maybe you have disabled in the system?
>
>
> On Fri, May 17, 2013 at 9:54 PM, Naderi, Sascha <SN...@datus.com> wrote:
>
>>
>> Dear Alexei,
>>
>> thank you for your reply. Any idea how a sip pin can be set?
>> If I try to configure one in the according field of the conference room,
>> it is never kept after saving. Instead the field is blank again.
>>
>>
>> Regards
>> Sascha
>>
>>
>>
>>
>> ________________________________________
>> Von: Alexei Fedotov [alexei.fedotov@gmail.com]
>> Gesendet: Freitag, 17. Mai 2013 16:31
>> Bis: user@openmeetings.apache.org
>> Betreff: Re: SIP Pin for conference room in OM 2.1
>>
>> Hello Sascha,
>> The current SIP implementation does not use OpenXG RPC-Gateway, it uses
>> Asterisk
>> --
>> With best regards / с наилучшими пожеланиями,
>> Alexei Fedotov / Алексей Федотов,
>> http://dataved.ru/
>> +7 916 562 8095
>>
>>
>> On Fri, May 17, 2013 at 6:29 PM, Naderi, Sascha <SN...@datus.com>
>> wrote:
>> > Dear all,
>> >
>> >
>> >
>> >
>> >
>> > I have a question concerning openmeetings 2.1 sip integration.
>> >
>> > The configuration of a conference room has the setting for the
>> conference
>> > sip number and sip pin. The helptext says that both are automatically
>> > created via OpenXG RPC-Gateway. In my case the sip number is created but
>> > never a sip pin.
>> >
>> > How can i get a sip pin working for the conference room?
>> >
>> >
>> >
>> >
>> >
>> > Best regards
>> >
>> > Sascha
>> >
>> >
>>
>
>
>
> --
> WBR
> Maxim aka solomax
>
--
WBR
Maxim aka solomax
Re: SIP Pin for conference room in OM 2.1
Posted by "Naderi, Sascha" <SN...@datus.com>.
Dear Maxim,
thanks for the hint. Could you please specify it a bit more. I can not find where I could possibly have disabled it.
I am using apache-openmeetings-2.1.0.r1443823-08-02-2013_0219´
I have checked the configuration settings in the GUI "Manage system settings" and there doesn´t seem to be anything according.
My sip integration does not match with the latest description http://openmeetings.apache.org/red5sip-integration_2.1.html. It must be from an older one. It does not have the confbridge.
Best regards
Sascha
________________________________
Von: Maxim Solodovnik [solomax666@gmail.com]
Gesendet: Freitag, 17. Mai 2013 18:43
Bis: Openmeetings user-list
Betreff: Re: SIP Pin for conference room in OM 2.1
Maybe you have disabled in the system?
On Fri, May 17, 2013 at 9:54 PM, Naderi, Sascha <SN...@datus.com>> wrote:
Dear Alexei,
thank you for your reply. Any idea how a sip pin can be set?
If I try to configure one in the according field of the conference room, it is never kept after saving. Instead the field is blank again.
Regards
Sascha
________________________________________
Von: Alexei Fedotov [alexei.fedotov@gmail.com<ma...@gmail.com>]
Gesendet: Freitag, 17. Mai 2013 16:31
Bis: user@openmeetings.apache.org<ma...@openmeetings.apache.org>
Betreff: Re: SIP Pin for conference room in OM 2.1
Hello Sascha,
The current SIP implementation does not use OpenXG RPC-Gateway, it uses Asterisk
--
With best regards / с наилучшими пожеланиями,
Alexei Fedotov / Алексей Федотов,
http://dataved.ru/
+7 916 562 8095
On Fri, May 17, 2013 at 6:29 PM, Naderi, Sascha <SN...@datus.com>> wrote:
> Dear all,
>
>
>
>
>
> I have a question concerning openmeetings 2.1 sip integration.
>
> The configuration of a conference room has the setting for the conference
> sip number and sip pin. The helptext says that both are automatically
> created via OpenXG RPC-Gateway. In my case the sip number is created but
> never a sip pin.
>
> How can i get a sip pin working for the conference room?
>
>
>
>
>
> Best regards
>
> Sascha
>
>
--
WBR
Maxim aka solomax
Re: SIP Pin for conference room in OM 2.1
Posted by Maxim Solodovnik <so...@gmail.com>.
Maybe you have disabled in the system?
On Fri, May 17, 2013 at 9:54 PM, Naderi, Sascha <SN...@datus.com> wrote:
>
> Dear Alexei,
>
> thank you for your reply. Any idea how a sip pin can be set?
> If I try to configure one in the according field of the conference room,
> it is never kept after saving. Instead the field is blank again.
>
>
> Regards
> Sascha
>
>
>
>
> ________________________________________
> Von: Alexei Fedotov [alexei.fedotov@gmail.com]
> Gesendet: Freitag, 17. Mai 2013 16:31
> Bis: user@openmeetings.apache.org
> Betreff: Re: SIP Pin for conference room in OM 2.1
>
> Hello Sascha,
> The current SIP implementation does not use OpenXG RPC-Gateway, it uses
> Asterisk
> --
> With best regards / с наилучшими пожеланиями,
> Alexei Fedotov / Алексей Федотов,
> http://dataved.ru/
> +7 916 562 8095
>
>
> On Fri, May 17, 2013 at 6:29 PM, Naderi, Sascha <SN...@datus.com> wrote:
> > Dear all,
> >
> >
> >
> >
> >
> > I have a question concerning openmeetings 2.1 sip integration.
> >
> > The configuration of a conference room has the setting for the conference
> > sip number and sip pin. The helptext says that both are automatically
> > created via OpenXG RPC-Gateway. In my case the sip number is created but
> > never a sip pin.
> >
> > How can i get a sip pin working for the conference room?
> >
> >
> >
> >
> >
> > Best regards
> >
> > Sascha
> >
> >
>
--
WBR
Maxim aka solomax
AW: SIP Pin for conference room in OM 2.1
Posted by "Naderi, Sascha" <SN...@datus.com>.
Dear Alexei,
thank you for your reply. Any idea how a sip pin can be set?
If I try to configure one in the according field of the conference room, it is never kept after saving. Instead the field is blank again.
Regards
Sascha
________________________________________
Von: Alexei Fedotov [alexei.fedotov@gmail.com]
Gesendet: Freitag, 17. Mai 2013 16:31
Bis: user@openmeetings.apache.org
Betreff: Re: SIP Pin for conference room in OM 2.1
Hello Sascha,
The current SIP implementation does not use OpenXG RPC-Gateway, it uses Asterisk
--
With best regards / с наилучшими пожеланиями,
Alexei Fedotov / Алексей Федотов,
http://dataved.ru/
+7 916 562 8095
On Fri, May 17, 2013 at 6:29 PM, Naderi, Sascha <SN...@datus.com> wrote:
> Dear all,
>
>
>
>
>
> I have a question concerning openmeetings 2.1 sip integration.
>
> The configuration of a conference room has the setting for the conference
> sip number and sip pin. The helptext says that both are automatically
> created via OpenXG RPC-Gateway. In my case the sip number is created but
> never a sip pin.
>
> How can i get a sip pin working for the conference room?
>
>
>
>
>
> Best regards
>
> Sascha
>
>
Re: SIP Pin for conference room in OM 2.1
Posted by Alexei Fedotov <al...@gmail.com>.
Hello Sascha,
The current SIP implementation does not use OpenXG RPC-Gateway, it uses Asterisk
--
With best regards / с наилучшими пожеланиями,
Alexei Fedotov / Алексей Федотов,
http://dataved.ru/
+7 916 562 8095
On Fri, May 17, 2013 at 6:29 PM, Naderi, Sascha <SN...@datus.com> wrote:
> Dear all,
>
>
>
>
>
> I have a question concerning openmeetings 2.1 sip integration.
>
> The configuration of a conference room has the setting for the conference
> sip number and sip pin. The helptext says that both are automatically
> created via OpenXG RPC-Gateway. In my case the sip number is created but
> never a sip pin.
>
> How can i get a sip pin working for the conference room?
>
>
>
>
>
> Best regards
>
> Sascha
>
>