You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@ignite.apache.org by Pavel Tupitsyn <pt...@apache.org> on 2025/07/15 06:34:26 UTC
Re: Query on AutoBaseLine Topology in .NET embedded service
Hi Satyajit, not sure I understand the question.
- Do you observe some unexpected behavior?
- Does baseline auto adjustment work for you or not?
On Tue, Jul 15, 2025 at 7:32 AM <sa...@barclays.com> wrote:
>
> Hi Pavel,
>
>
>
> We are running ignite cache in embedded mode in .NET service with persistence enabled.We have enabled SetBaselineAutoAdjustEnabledFlag to true in one of the node . When we start the cluster having 6 nodes it sets AutoBaseLine.
>
>
>
> Now lets say if one node goes down and we restart the node most of the time it joins the cluster and autobaselinenodes gets adjusted .
>
>
>
> There is a case where one node goes down and after certain interval of time lets say we restart that service it joins the cluster but baseline topology doesn’t changes. Here we need advice can we set the SetBaselineAutoAdjustEnabledFlag to true and try to restart the cache to resolve this issue? . What are the alternatives? We don’t want to use control scripts. We want to handle it through configuration as we are running cache as .NET service with persistence enabled?
>
>
>
>
>
> Regards
>
> Satyajit
>
>
>
>
> Restricted - External
>
>
> Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
>
> Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
>
> This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
>
> Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
>
> Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
>
> Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
>
>
RE: Query on AutoBaseLine Topology in .NET embedded service
Posted by "satyajit.mandal.barclays.com via user" <us...@ignite.apache.org>.
Hi Stephen,
Can you advise here. Also can we increase the default timeout( baselineAutoAdjustTimeout)
to lets say 3 hrs before baseline autoadjustment kicks in to avoid such issues?
If any nodes crashes and if it takes some time to do action and restart that node it will avoid below issue?
Regards
Satyajit
Restricted - External
From: Mandal, Satyajit: IT (PUN)
Sent: Tuesday, July 15, 2025 10:09 PM
To: user@ignite.apache.org
Subject: RE: Query on AutoBaseLine Topology in .NET embedded service
Hi Stephen,
We are not changing the baseline topology. We observed in some occasion when we are restarting the crashed node after certain time the ignite log shows
df505-355c-4b5a-9c77-431b299761b2%][GridClusterStateProcessor] Local node is not included in Baseline Topology and will not be used for data storage. Use control.(sh|bat) script or IgniteCluster interface to include the node to Baseline Topology.
So question was how can we get the ActiveBaseLineNode number to desired state . Do we need to clean the wal log of that node and restart the same?
Regards
Satyajit
From: Stephen Darlington <sd...@apache.org>>
Sent: Tuesday, July 15, 2025 8:08 PM
To: user@ignite.apache.org<ma...@ignite.apache.org>
Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
________________________________
CAUTION: This email originated from outside our organization - user-return-36742-Satyajit.Mandal=barclays.com@ignite.apache.org<ma...@ignite.apache.org> Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
________________________________
The question is: why do you need to continually change the baseline topology?
If you're just restarting a node -- say, for a software update -- there is no need to change the baseline. The baseline only needs to change when a node permanently comes in or out of service.
Regards,
Stephen
On Tue, 15 Jul 2025 at 09:03, Pavel Tupitsyn <pt...@apache.org>> wrote:
I'm not an expert on this topic, sorry, let's see if someone else will chip in.
On Tue, Jul 15, 2025 at 9:38 AM <sa...@barclays.com>> wrote:
>
> Hi Pavel,
>
> It works most of time. Sometimes it doesn't work. The node joins the cluster but baseline toplogy doesn't changes. So need to know what are the options here to resolve this and get the baselinetopology updated?
>
> Regards
> Satyajit
>
>
>
>
> Restricted - External
> -----Original Message-----
> From: Pavel Tupitsyn <pt...@apache.org>>
> Sent: Tuesday, July 15, 2025 12:04 PM
> To: Mandal, Satyajit: IT (PUN) <sa...@barclays.com>>
> Cc: user@ignite.apache.org<ma...@ignite.apache.org>
> Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
>
> CAUTION: This email originated from outside our organization - user-return-36737-Satyajit.Mandal=barclays.com@ignite.apache.org<ma...@ignite.apache.org> Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
>
> ______________________________________________________________________
> Hi Satyajit, not sure I understand the question.
> - Do you observe some unexpected behavior?
> - Does baseline auto adjustment work for you or not?
>
> On Tue, Jul 15, 2025 at 7:32 AM <sa...@barclays.com>> wrote:
> >
> > Hi Pavel,
> >
> >
> >
> > We are running ignite cache in embedded mode in .NET service with persistence enabled.We have enabled SetBaselineAutoAdjustEnabledFlag to true in one of the node . When we start the cluster having 6 nodes it sets AutoBaseLine.
> >
> >
> >
> > Now lets say if one node goes down and we restart the node most of the time it joins the cluster and autobaselinenodes gets adjusted .
> >
> >
> >
> > There is a case where one node goes down and after certain interval of time lets say we restart that service it joins the cluster but baseline topology doesn’t changes. Here we need advice can we set the SetBaselineAutoAdjustEnabledFlag to true and try to restart the cache to resolve this issue? . What are the alternatives? We don’t want to use control scripts. We want to handle it through configuration as we are running cache as .NET service with persistence enabled?
> >
> >
> >
> >
> >
> > Regards
> >
> > Satyajit
> >
> >
> >
> >
> > Restricted - External
> >
> >
> > Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
> >
> > Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
> >
> > This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
> >
> > Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
> >
> > Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
> >
> > Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
> >
> >
>
> Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
>
> Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
>
> This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
>
> Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
>
> Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
>
> Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
>
Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
RE: Query on AutoBaseLine Topology in .NET embedded service
Posted by "satyajit.mandal.barclays.com via user" <us...@ignite.apache.org>.
Hi Stephen,
We are not changing the baseline topology. We observed in some occasion when we are restarting the crashed node after certain time the ignite log shows
df505-355c-4b5a-9c77-431b299761b2%][GridClusterStateProcessor] Local node is not included in Baseline Topology and will not be used for data storage. Use control.(sh|bat) script or IgniteCluster interface to include the node to Baseline Topology.
So question was how can we get the ActiveBaseLineNode number to desired state . Do we need to clean the wal log of that node and restart the same?
Regards
Satyajit
Restricted - External
From: Stephen Darlington <sd...@apache.org>
Sent: Tuesday, July 15, 2025 8:08 PM
To: user@ignite.apache.org
Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
________________________________
CAUTION: This email originated from outside our organization - user-return-36742-Satyajit.Mandal=barclays.com@ignite.apache.org<ma...@ignite.apache.org> Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
________________________________
The question is: why do you need to continually change the baseline topology?
If you're just restarting a node -- say, for a software update -- there is no need to change the baseline. The baseline only needs to change when a node permanently comes in or out of service.
Regards,
Stephen
On Tue, 15 Jul 2025 at 09:03, Pavel Tupitsyn <pt...@apache.org>> wrote:
I'm not an expert on this topic, sorry, let's see if someone else will chip in.
On Tue, Jul 15, 2025 at 9:38 AM <sa...@barclays.com>> wrote:
>
> Hi Pavel,
>
> It works most of time. Sometimes it doesn't work. The node joins the cluster but baseline toplogy doesn't changes. So need to know what are the options here to resolve this and get the baselinetopology updated?
>
> Regards
> Satyajit
>
>
>
>
> Restricted - External
> -----Original Message-----
> From: Pavel Tupitsyn <pt...@apache.org>>
> Sent: Tuesday, July 15, 2025 12:04 PM
> To: Mandal, Satyajit: IT (PUN) <sa...@barclays.com>>
> Cc: user@ignite.apache.org<ma...@ignite.apache.org>
> Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
>
> CAUTION: This email originated from outside our organization - user-return-36737-Satyajit.Mandal=barclays.com@ignite.apache.org<ma...@ignite.apache.org> Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
>
> ______________________________________________________________________
> Hi Satyajit, not sure I understand the question.
> - Do you observe some unexpected behavior?
> - Does baseline auto adjustment work for you or not?
>
> On Tue, Jul 15, 2025 at 7:32 AM <sa...@barclays.com>> wrote:
> >
> > Hi Pavel,
> >
> >
> >
> > We are running ignite cache in embedded mode in .NET service with persistence enabled.We have enabled SetBaselineAutoAdjustEnabledFlag to true in one of the node . When we start the cluster having 6 nodes it sets AutoBaseLine.
> >
> >
> >
> > Now lets say if one node goes down and we restart the node most of the time it joins the cluster and autobaselinenodes gets adjusted .
> >
> >
> >
> > There is a case where one node goes down and after certain interval of time lets say we restart that service it joins the cluster but baseline topology doesn’t changes. Here we need advice can we set the SetBaselineAutoAdjustEnabledFlag to true and try to restart the cache to resolve this issue? . What are the alternatives? We don’t want to use control scripts. We want to handle it through configuration as we are running cache as .NET service with persistence enabled?
> >
> >
> >
> >
> >
> > Regards
> >
> > Satyajit
> >
> >
> >
> >
> > Restricted - External
> >
> >
> > Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
> >
> > Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
> >
> > This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
> >
> > Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
> >
> > Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
> >
> > Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
> >
> >
>
> Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
>
> Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
>
> This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
>
> Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
>
> Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
>
> Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
>
Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
Re: Query on AutoBaseLine Topology in .NET embedded service
Posted by Stephen Darlington <sd...@apache.org>.
The question is: why do you need to continually change the baseline
topology?
If you're just restarting a node -- say, for a software update -- there is
no need to change the baseline. The baseline only needs to change when a
node permanently comes in or out of service.
Regards,
Stephen
On Tue, 15 Jul 2025 at 09:03, Pavel Tupitsyn <pt...@apache.org> wrote:
> I'm not an expert on this topic, sorry, let's see if someone else will
> chip in.
>
> On Tue, Jul 15, 2025 at 9:38 AM <sa...@barclays.com> wrote:
> >
> > Hi Pavel,
> >
> > It works most of time. Sometimes it doesn't work. The node joins the
> cluster but baseline toplogy doesn't changes. So need to know what are
> the options here to resolve this and get the baselinetopology updated?
> >
> > Regards
> > Satyajit
> >
> >
> >
> >
> > Restricted - External
> > -----Original Message-----
> > From: Pavel Tupitsyn <pt...@apache.org>
> > Sent: Tuesday, July 15, 2025 12:04 PM
> > To: Mandal, Satyajit: IT (PUN) <sa...@barclays.com>
> > Cc: user@ignite.apache.org
> > Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
> >
> > CAUTION: This email originated from outside our organization -
> user-return-36737-Satyajit.Mandal=barclays.com@ignite.apache.org Do not
> click on links, open attachments, or respond unless you recognize the
> sender and can validate the content is safe.
> >
> > ______________________________________________________________________
> > Hi Satyajit, not sure I understand the question.
> > - Do you observe some unexpected behavior?
> > - Does baseline auto adjustment work for you or not?
> >
> > On Tue, Jul 15, 2025 at 7:32 AM <sa...@barclays.com> wrote:
> > >
> > > Hi Pavel,
> > >
> > >
> > >
> > > We are running ignite cache in embedded mode in .NET service with
> persistence enabled.We have enabled SetBaselineAutoAdjustEnabledFlag
> to true in one of the node . When we start the cluster having 6 nodes
> it sets AutoBaseLine.
> > >
> > >
> > >
> > > Now lets say if one node goes down and we restart the node most
> of the time it joins the cluster and autobaselinenodes gets adjusted .
> > >
> > >
> > >
> > > There is a case where one node goes down and after certain interval
> of time lets say we restart that service it joins the cluster but
> baseline topology doesn’t changes. Here we need advice can we set the
> SetBaselineAutoAdjustEnabledFlag to true and try to restart the
> cache to resolve this issue? . What are the alternatives? We don’t want
> to use control scripts. We want to handle it through configuration as we
> are running cache as .NET service with persistence enabled?
> > >
> > >
> > >
> > >
> > >
> > > Regards
> > >
> > > Satyajit
> > >
> > >
> > >
> > >
> > > Restricted - External
> > >
> > >
> > > Barclays Execution Services Limited registered in England. Registered
> No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
> > >
> > > Barclays Execution Services Limited provides support and
> administrative services across Barclays group. Barclays Execution Services
> Limited is an appointed representative of Barclays Bank UK plc, Barclays
> Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc
> and Barclays Bank plc are authorised by the Prudential Regulation Authority
> and regulated by the Financial Conduct Authority and the Prudential
> Regulation Authority. Clydesdale Financial Services Limited is authorised
> and regulated by the Financial Conduct Authority.
> > >
> > > This email and any attachments are confidential and intended solely
> for the addressee and may also be privileged or exempt from disclosure
> under applicable law. If you are not the addressee, or have received this
> email in error, please notify the sender and immediately delete it and any
> attachments from your system. Do not copy, use, disclose or otherwise act
> on any part of this email or its attachments.
> > >
> > > Internet communications are not guaranteed to be secure or virus-free.
> The Barclays group does not accept responsibility for any loss arising from
> unauthorised access to, or interference with, any internet communications
> by any third party, or from the transmission of any viruses. Replies to
> this email may be monitored by the Barclays group for operational or
> business reasons.
> > >
> > > Any opinion or other information in this email or its attachments that
> does not relate to the business of the Barclays group is personal to the
> sender and is not given or endorsed by the Barclays group.
> > >
> > > Unless specifically indicated, this e-mail is not an offer to buy or
> sell or a solicitation to buy or sell any securities, investment products
> or other financial product or service, an official confirmation of any
> transaction, or an official statement of Barclays.
> > >
> > >
> >
> > Barclays Execution Services Limited registered in England. Registered
> No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
> >
> > Barclays Execution Services Limited provides support and administrative
> services across Barclays group. Barclays Execution Services Limited is an
> appointed representative of Barclays Bank UK plc, Barclays Bank plc and
> Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays
> Bank plc are authorised by the Prudential Regulation Authority and
> regulated by the Financial Conduct Authority and the Prudential Regulation
> Authority. Clydesdale Financial Services Limited is authorised and
> regulated by the Financial Conduct Authority.
> >
> > This email and any attachments are confidential and intended solely for
> the addressee and may also be privileged or exempt from disclosure under
> applicable law. If you are not the addressee, or have received this email
> in error, please notify the sender and immediately delete it and any
> attachments from your system. Do not copy, use, disclose or otherwise act
> on any part of this email or its attachments.
> >
> > Internet communications are not guaranteed to be secure or virus-free.
> The Barclays group does not accept responsibility for any loss arising from
> unauthorised access to, or interference with, any internet communications
> by any third party, or from the transmission of any viruses. Replies to
> this email may be monitored by the Barclays group for operational or
> business reasons.
> >
> > Any opinion or other information in this email or its attachments that
> does not relate to the business of the Barclays group is personal to the
> sender and is not given or endorsed by the Barclays group.
> >
> > Unless specifically indicated, this e-mail is not an offer to buy or
> sell or a solicitation to buy or sell any securities, investment products
> or other financial product or service, an official confirmation of any
> transaction, or an official statement of Barclays.
> >
>
RE: Query on AutoBaseLine Topology in .NET embedded service
Posted by "satyajit.mandal.barclays.com via user" <us...@ignite.apache.org>.
Hi Pavel,
The log says this
df505-355c-4b5a-9c77-431b299761b2%][GridClusterStateProcessor] Local node is not included in Baseline Topology and will not be used for data storage. Use control.(sh|bat) script or IgniteCluster interface to include the node to Baseline Topology.
Can you explain what this means IgniteCluster interface ? Are we saying that if we use below code and restart the cache it will work?
ignite.GetCluster().SetBaselineAutoAdjustEnabledFlag(true);
ignite.GetCluster().SetBaselineAutoAdjustTimeout(30000);
https://ignite.apache.org/docs/latest/clustering/baseline-topology
Regards
Satyajit
Restricted - External
-----Original Message-----
From: Pavel Tupitsyn <pt...@apache.org>
Sent: Tuesday, July 15, 2025 1:33 PM
To: Mandal, Satyajit: IT (PUN) <sa...@barclays.com>
Cc: user@ignite.apache.org
Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
CAUTION: This email originated from outside our organization - ptupitsyn@apache.org Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
______________________________________________________________________
I'm not an expert on this topic, sorry, let's see if someone else will chip in.
On Tue, Jul 15, 2025 at 9:38 AM <sa...@barclays.com> wrote:
>
> Hi Pavel,
>
> It works most of time. Sometimes it doesn't work. The node joins the cluster but baseline toplogy doesn't changes. So need to know what are the options here to resolve this and get the baselinetopology updated?
>
> Regards
> Satyajit
>
>
>
>
> Restricted - External
> -----Original Message-----
> From: Pavel Tupitsyn <pt...@apache.org>
> Sent: Tuesday, July 15, 2025 12:04 PM
> To: Mandal, Satyajit: IT (PUN) <sa...@barclays.com>
> Cc: user@ignite.apache.org
> Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
>
> CAUTION: This email originated from outside our organization - user-return-36737-Satyajit.Mandal=barclays.com@ignite.apache.org Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
>
> ______________________________________________________________________
> Hi Satyajit, not sure I understand the question.
> - Do you observe some unexpected behavior?
> - Does baseline auto adjustment work for you or not?
>
> On Tue, Jul 15, 2025 at 7:32 AM <sa...@barclays.com> wrote:
> >
> > Hi Pavel,
> >
> >
> >
> > We are running ignite cache in embedded mode in .NET service with persistence enabled.We have enabled SetBaselineAutoAdjustEnabledFlag to true in one of the node . When we start the cluster having 6 nodes it sets AutoBaseLine.
> >
> >
> >
> > Now lets say if one node goes down and we restart the node most of the time it joins the cluster and autobaselinenodes gets adjusted .
> >
> >
> >
> > There is a case where one node goes down and after certain interval of time lets say we restart that service it joins the cluster but baseline topology doesn’t changes. Here we need advice can we set the SetBaselineAutoAdjustEnabledFlag to true and try to restart the cache to resolve this issue? . What are the alternatives? We don’t want to use control scripts. We want to handle it through configuration as we are running cache as .NET service with persistence enabled?
> >
> >
> >
> >
> >
> > Regards
> >
> > Satyajit
> >
> >
> >
> >
> > Restricted - External
> >
> >
> > Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
> >
> > Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
> >
> > This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
> >
> > Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
> >
> > Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
> >
> > Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
> >
> >
>
> Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
>
> Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
>
> This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
>
> Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
>
> Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
>
> Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
>
Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
Re: Query on AutoBaseLine Topology in .NET embedded service
Posted by Pavel Tupitsyn <pt...@apache.org>.
I'm not an expert on this topic, sorry, let's see if someone else will chip in.
On Tue, Jul 15, 2025 at 9:38 AM <sa...@barclays.com> wrote:
>
> Hi Pavel,
>
> It works most of time. Sometimes it doesn't work. The node joins the cluster but baseline toplogy doesn't changes. So need to know what are the options here to resolve this and get the baselinetopology updated?
>
> Regards
> Satyajit
>
>
>
>
> Restricted - External
> -----Original Message-----
> From: Pavel Tupitsyn <pt...@apache.org>
> Sent: Tuesday, July 15, 2025 12:04 PM
> To: Mandal, Satyajit: IT (PUN) <sa...@barclays.com>
> Cc: user@ignite.apache.org
> Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
>
> CAUTION: This email originated from outside our organization - user-return-36737-Satyajit.Mandal=barclays.com@ignite.apache.org Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
>
> ______________________________________________________________________
> Hi Satyajit, not sure I understand the question.
> - Do you observe some unexpected behavior?
> - Does baseline auto adjustment work for you or not?
>
> On Tue, Jul 15, 2025 at 7:32 AM <sa...@barclays.com> wrote:
> >
> > Hi Pavel,
> >
> >
> >
> > We are running ignite cache in embedded mode in .NET service with persistence enabled.We have enabled SetBaselineAutoAdjustEnabledFlag to true in one of the node . When we start the cluster having 6 nodes it sets AutoBaseLine.
> >
> >
> >
> > Now lets say if one node goes down and we restart the node most of the time it joins the cluster and autobaselinenodes gets adjusted .
> >
> >
> >
> > There is a case where one node goes down and after certain interval of time lets say we restart that service it joins the cluster but baseline topology doesn’t changes. Here we need advice can we set the SetBaselineAutoAdjustEnabledFlag to true and try to restart the cache to resolve this issue? . What are the alternatives? We don’t want to use control scripts. We want to handle it through configuration as we are running cache as .NET service with persistence enabled?
> >
> >
> >
> >
> >
> > Regards
> >
> > Satyajit
> >
> >
> >
> >
> > Restricted - External
> >
> >
> > Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
> >
> > Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
> >
> > This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
> >
> > Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
> >
> > Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
> >
> > Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
> >
> >
>
> Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
>
> Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
>
> This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
>
> Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
>
> Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
>
> Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
>
RE: Query on AutoBaseLine Topology in .NET embedded service
Posted by "satyajit.mandal.barclays.com via user" <us...@ignite.apache.org>.
Hi Pavel,
It works most of time. Sometimes it doesn't work. The node joins the cluster but baseline toplogy doesn't changes. So need to know what are the options here to resolve this and get the baselinetopology updated?
Regards
Satyajit
Restricted - External
-----Original Message-----
From: Pavel Tupitsyn <pt...@apache.org>
Sent: Tuesday, July 15, 2025 12:04 PM
To: Mandal, Satyajit: IT (PUN) <sa...@barclays.com>
Cc: user@ignite.apache.org
Subject: Re: Query on AutoBaseLine Topology in .NET embedded service
CAUTION: This email originated from outside our organization - user-return-36737-Satyajit.Mandal=barclays.com@ignite.apache.org Do not click on links, open attachments, or respond unless you recognize the sender and can validate the content is safe.
______________________________________________________________________
Hi Satyajit, not sure I understand the question.
- Do you observe some unexpected behavior?
- Does baseline auto adjustment work for you or not?
On Tue, Jul 15, 2025 at 7:32 AM <sa...@barclays.com> wrote:
>
> Hi Pavel,
>
>
>
> We are running ignite cache in embedded mode in .NET service with persistence enabled.We have enabled SetBaselineAutoAdjustEnabledFlag to true in one of the node . When we start the cluster having 6 nodes it sets AutoBaseLine.
>
>
>
> Now lets say if one node goes down and we restart the node most of the time it joins the cluster and autobaselinenodes gets adjusted .
>
>
>
> There is a case where one node goes down and after certain interval of time lets say we restart that service it joins the cluster but baseline topology doesn’t changes. Here we need advice can we set the SetBaselineAutoAdjustEnabledFlag to true and try to restart the cache to resolve this issue? . What are the alternatives? We don’t want to use control scripts. We want to handle it through configuration as we are running cache as .NET service with persistence enabled?
>
>
>
>
>
> Regards
>
> Satyajit
>
>
>
>
> Restricted - External
>
>
> Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
>
> Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
>
> This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
>
> Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
>
> Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
>
> Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.
>
>
Barclays Execution Services Limited registered in England. Registered No. 1767980. Registered office: 1 Churchill Place, London, E14 5HP
Barclays Execution Services Limited provides support and administrative services across Barclays group. Barclays Execution Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority.
This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this email in error, please notify the sender and immediately delete it and any attachments from your system. Do not copy, use, disclose or otherwise act on any part of this email or its attachments.
Internet communications are not guaranteed to be secure or virus-free. The Barclays group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party, or from the transmission of any viruses. Replies to this email may be monitored by the Barclays group for operational or business reasons.
Any opinion or other information in this email or its attachments that does not relate to the business of the Barclays group is personal to the sender and is not given or endorsed by the Barclays group.
Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays.