You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@cassandra.apache.org by varun saluja <sa...@gmail.com> on 2017/05/16 10:52:44 UTC

Long running compaction on huge hint table.

Hi Experts,

We are facing issue on production cluster. Compaction on system.hint table
is running from last 2 days.


pending tasks: 1
   compaction type   keyspace   table     completed          total
            unit   progress
              Compaction     system   hints   20623021829   *877874092407*
 bytes      2.35%
Active compaction remaining time :   0h27m15s


Active compaction remaining time shows in minutes.  But, this is job is
running like indefinitely.

We have 3 node cluster V 2.1.7. And we ran  write intensive job last week
on particular table.
Compaction on this table finished but hint table size is growing
continuously.

Can someone Please help me.


Thanks & Regards,
Varun Saluja

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Hi,

Could see intermittent GCs and mutation drops.

*System log reports:*

INFO  [Service Thread]  GCInspector.java:252 - ParNew GC in 3816ms.  CMS
Old Gen: 4663180720 -> 5520012520; Par Eden Space: 1718091776 -> 0; Par
Survivor Space: 0 -> 214695936
INFO  [ScheduledTasks:1] MessagingService.java:888 - 228 MUTATION messages
dropped in last 5000ms

PS: As of now , there is no significant load on our cluster. The only load
is of these hints been replayed.

Can you Please help.

Regards,
Varun Saluja

On 16 May 2017 at 18:28, varun saluja <sa...@gmail.com> wrote:

> Hi Nitan,
>
> Thanks for response.
>
> Yes, I could see mutation drops and increase count in system.hints. Is
> there any way , i can proceed to truncate hints like using nodetool
> truncatehints.
>
>
> Regards,
> Varun Saluja
>
> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>
>> Do you see mutation drops?
>> Select count from system.hints; is it increasing?
>>
>> Sent from my iPhone
>>
>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>
>> Hi Experts,
>>
>> We are facing issue on production cluster. Compaction on system.hint
>> table is running from last 2 days.
>>
>>
>> pending tasks: 1
>>    compaction type   keyspace   table     completed          total
>>               unit   progress
>>               Compaction     system   hints   20623021829
>> *877874092407*   bytes      2.35%
>> Active compaction remaining time :   0h27m15s
>>
>>
>> Active compaction remaining time shows in minutes.  But, this is job is
>> running like indefinitely.
>>
>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week
>> on particular table.
>> Compaction on this table finished but hint table size is growing
>> continuously.
>>
>> Can someone Please help me.
>>
>>
>> Thanks & Regards,
>> Varun Saluja
>>
>>
>

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Hi Nitan,

Rolling reatart did not helped. Same compaction status after restart.
No other processes running here. These are dedicated cassandra nodes.
Sent from my iPhone

> On 16-May-2017, at 7:16 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
> 
> Have you tried rolling restart?
> Any agent or other process hogging system?
> 
> Sent from my iPhone
> 
>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>> 
>> Hi Nitan,
>> 
>> Thanks for response.
>> 
>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>> 
>> 
>> Regards,
>> Varun Saluja
>> 
>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> Do you see mutation drops?
>>> Select count from system.hints; is it increasing?
>>> 
>>> Sent from my iPhone
>>> 
>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>> 
>>>> Hi Experts,
>>>> 
>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>> 
>>>> 
>>>> pending tasks: 1
>>>>    compaction type   keyspace   table     completed          total                      unit   progress
>>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>> Active compaction remaining time :   0h27m15s
>>>> 
>>>> 
>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>> 
>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>> Compaction on this table finished but hint table size is growing continuously.
>>>> 
>>>> Can someone Please help me.
>>>> 
>>>> 
>>>> Thanks & Regards,
>>>> Varun Saluja
>>>> 
>> 

Re: Long running compaction on huge hint table.

Posted by Nitan Kainth <ni...@bamlabs.com>.
Have you tried rolling restart?
Any agent or other process hogging system?

Sent from my iPhone

> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
> 
> Hi Nitan,
> 
> Thanks for response.
> 
> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
> 
> 
> Regards,
> Varun Saluja
> 
>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>> Do you see mutation drops?
>> Select count from system.hints; is it increasing?
>> 
>> Sent from my iPhone
>> 
>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>> 
>>> Hi Experts,
>>> 
>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>> 
>>> 
>>> pending tasks: 1
>>>    compaction type   keyspace   table     completed          total                      unit   progress
>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>> Active compaction remaining time :   0h27m15s
>>> 
>>> 
>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>> 
>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>> Compaction on this table finished but hint table size is growing continuously.
>>> 
>>> Can someone Please help me.
>>> 
>>> 
>>> Thanks & Regards,
>>> Varun Saluja
>>> 
> 

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Thanks a lot Ben.

Really appreciate your suggestions here.

Regards,
Varun Saluja

Sent from my iPhone

> On 21-May-2017, at 5:40 PM, Ben Slater <be...@instaclustr.com> wrote:
> 
> My main suggestion would be to monitor the compaction backlog (pending compactions). If the backlog is growing you need to either throttle writes, add more capacity to your cluster or possibly tune things. There is no simple answer to tuning but several good guides on the internet to help - this is my favourite: https://tobert.github.io/pages/als-cassandra-21-tuning-guide.html. 
> 
> Unless there is something really badly set up with your cluster then I would guess that if it got in this state trying to handle your write load then you’ll potentially need additional capacity as well as tuning to meet your needs.
> 
> Cheers
> Ben
> 
>> On Sun, 21 May 2017 at 21:47 varun saluja <sa...@gmail.com> wrote:
>> Hi All,
>>   
>> Can someone Please suggest any recommendations for write intensive jobs
>> 
>> Regards,
>> Varun Saluja
>> Sent from my iPhone
>> 
>>> On 17-May-2017, at 3:52 PM, varun saluja <sa...@gmail.com> wrote:
>>> 
>>> Thanks Jeff.
>>> 
>>> I have taken backup and did manual removal of hints with rolling restart. This brought cluster back in stable state.
>>> 
>>> Can you Please share some recommendation for write intensive job . Actually ,we need to load dump from kafka to 3 node cassandra cluster . Write TPS per node will be around 7k.
>>> 
>>> Can you Please suggest any parameter tuning for our use case here. We do not want to get stuck in similar situation of large compactions of hint or any other table where we are loading dump.
>>> 
>>> 
>>> Regards,
>>> Varun
>>> 
>>>> On 17 May 2017 at 09:17, Jeff Jirsa <jj...@gmail.com> wrote:
>>>> You could also try stopping compaction, but that'll probably take a very long time as well
>>>> 
>>>> Manually stopping each node (one at a time) and removing the sstables from only system.hints may be a better option. May want to take a snapshot if you're very concerned with that data.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> -- 
>>>> Jeff Jirsa
>>>> 
>>>> 
>>>>> On May 16, 2017, at 6:53 PM, varun saluja <sa...@gmail.com> wrote:
>>>>> 
>>>>> Hi,
>>>>> 
>>>>>  
>>>>>  Truncatehints on nodes is running for more than 7 hours now. Nothing mentioned for same in sysemt logs even.
>>>>> 
>>>>> And compaction stats reports increase in hints total bytes.
>>>>> 
>>>>> pending tasks: 1
>>>>>    compaction type   keyspace   table     completed          total    unit   progress
>>>>>         Compaction     system   hints   12152557998   869257869352   bytes      1.40%
>>>>> Active compaction remaining time :   0h27m14s
>>>>> 
>>>>> Can anything else be checked here? Will manually deleting system.hint files and restart node fix this.
>>>>> 
>>>>> 
>>>>> 
>>>>> Regards,
>>>>> Varun Saluja
>>>>> 
>>>>>> On 16 May 2017 at 23:29, varun saluja <sa...@gmail.com> wrote:
>>>>>> Hi Jeff,
>>>>>> 
>>>>>> I ran nodetool truncatehints  on all nodes. Its running for more than 30 mins now. Status for compactstats reports same.
>>>>>> 
>>>>>> pending tasks: 1
>>>>>>    compaction type   keyspace   table     completed          total    unit   progress
>>>>>>         Compaction     system   hints   11189118129   851658989612   bytes      1.31%
>>>>>> Active compaction remaining time :   0h26m43s
>>>>>> 
>>>>>> Will truncatehints takes time for completion? Could not see anything related truncatehints in system logs.
>>>>>> 
>>>>>> Please let me know if anything else can be checked here.
>>>>>> 
>>>>>> Regards,
>>>>>> Varun Saluja 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>>> On 16 May 2017 at 20:58, varun saluja <sa...@gmail.com> wrote:
>>>>>>> Thanks a lot Jeff.
>>>>>>> 
>>>>>>> You have explaned very well here. We have consitency as local quorum. Will follow truncate hints and repair therafter.
>>>>>>> 
>>>>>>> I hope this brings cluster in stable state
>>>>>>> 
>>>>>>> Thanks again.
>>>>>>> 
>>>>>>> Regards,
>>>>>>> Varun Saluja
>>>>>>> 
>>>>>>> Sent from my iPhone
>>>>>>> 
>>>>>>> > On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
>>>>>>> >
>>>>>>> >
>>>>>>> > In Cassandra versions up to 3.0, hints are stored within a table, where the partition key is the host ID of the server for which the hints are stored.
>>>>>>> >
>>>>>>> > In such a data model, accumulating 800GB of hints is almost certain to cause very wide rows, which will in turn cause GC pressure when you attempt to read the hints for delivery. This will cause GC pauses, which will cause hints to fail to be delivered, which will cause more hints to be stored. This is bad.
>>>>>>> >
>>>>>>> > In 3.0, hints were rewritten to work around this design flaw. In 2.1, your most likely corrective course is to use 'nodetool truncatehints' on all servers, followed by 'nodetool repair' to deliver the data you lost by truncating the hints.
>>>>>>> >
>>>>>>> > NOTE: this is ONLY safe if you wrote with a consistency level stronger than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you truncate hints.
>>>>>>> >
>>>>>>> > - Jeff
>>>>>>> >
>>>>>>> >> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote:
>>>>>>> >> Thanks for update.
>>>>>>> >> I could see lot of io waits. This causing  Gc and mutation drops .
>>>>>>> >> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
>>>>>>> >> compactionstats show very high hint bytes like 780gb around. Is this normal?
>>>>>>> >>
>>>>>>> >> Just mentioning we are using flash disks.
>>>>>>> >>
>>>>>>> >> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
>>>>>>> >> Please let me know if any recommendation on same.
>>>>>>> >>
>>>>>>> >> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
>>>>>>> >>
>>>>>>> >> Regards,
>>>>>>> >> Varun
>>>>>>> >>
>>>>>>> >> Sent from my iPhone
>>>>>>> >>
>>>>>>> >>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>>>>> >>>
>>>>>>> >>> Yes but it means data has to be replicated using repair.
>>>>>>> >>>
>>>>>>> >>> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
>>>>>>> >>>
>>>>>>> >>> Sent from my iPhone
>>>>>>> >>>
>>>>>>> >>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>>>>>>> >>>>
>>>>>>> >>>> Hi Nitan,
>>>>>>> >>>>
>>>>>>> >>>> Thanks for response.
>>>>>>> >>>>
>>>>>>> >>>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>> Regards,
>>>>>>> >>>> Varun Saluja
>>>>>>> >>>>
>>>>>>> >>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>>>>> >>>>> Do you see mutation drops?
>>>>>>> >>>>> Select count from system.hints; is it increasing?
>>>>>>> >>>>>
>>>>>>> >>>>> Sent from my iPhone
>>>>>>> >>>>>
>>>>>>> >>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>>>>> >>>>>>
>>>>>>> >>>>>> Hi Experts,
>>>>>>> >>>>>>
>>>>>>> >>>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>>> pending tasks: 1
>>>>>>> >>>>>>   compaction type   keyspace   table     completed          total                      unit   progress
>>>>>>> >>>>>>              Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>>>>> >>>>>> Active compaction remaining time :   0h27m15s
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>>>>> >>>>>>
>>>>>>> >>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>>>>> >>>>>> Compaction on this table finished but hint table size is growing continuously.
>>>>>>> >>>>>>
>>>>>>> >>>>>> Can someone Please help me.
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>>> Thanks & Regards,
>>>>>>> >>>>>> Varun Saluja
>>>>>>> >>>>>>
>>>>>>> >>>>
>>>>>>> >>
>>>>>>> >
>>>>>>> > ---------------------------------------------------------------------
>>>>>>> > To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
>>>>>>> > For additional commands, e-mail: user-help@cassandra.apache.org
>>>>>>> >
>>>>>> 
>>>>> 
>>> 
> 
> -- 
> Ben Slater
> Chief Product Officer
> 
>     
> Read our latest technical blog posts here.
> This email has been sent on behalf of Instaclustr Pty. Limited (Australia) and Instaclustr Inc (USA).
> This email and any attachments may contain confidential and legally privileged information.  If you are not the intended recipient, do not copy or disclose its content, but please reply to this email immediately and highlight the error to the sender and then immediately delete the message.

Re: Long running compaction on huge hint table.

Posted by Ben Slater <be...@instaclustr.com>.
My main suggestion would be to monitor the compaction backlog (pending
compactions). If the backlog is growing you need to either throttle writes,
add more capacity to your cluster or possibly tune things. There is no
simple answer to tuning but several good guides on the internet to help -
this is my favourite:
https://tobert.github.io/pages/als-cassandra-21-tuning-guide.html.

Unless there is something really badly set up with your cluster then I
would guess that if it got in this state trying to handle your write load
then you’ll potentially need additional capacity as well as tuning to meet
your needs.

Cheers
Ben

On Sun, 21 May 2017 at 21:47 varun saluja <sa...@gmail.com> wrote:

> Hi All,
>
> Can someone Please suggest any recommendations for write intensive jobs
>
> Regards,
> Varun Saluja
> Sent from my iPhone
>
> On 17-May-2017, at 3:52 PM, varun saluja <sa...@gmail.com> wrote:
>
> Thanks Jeff.
>
> I have taken backup and did manual removal of hints with rolling restart.
> This brought cluster back in stable state.
>
> Can you Please share some recommendation for write intensive job .
> Actually ,we need to load dump from kafka to 3 node cassandra cluster .
> Write TPS per node will be around 7k.
>
> Can you Please suggest any parameter tuning for our use case here. We do
> not want to get stuck in similar situation of large compactions of hint or
> any other table where we are loading dump.
>
>
> Regards,
> Varun
>
> On 17 May 2017 at 09:17, Jeff Jirsa <jj...@gmail.com> wrote:
>
>> You could also try stopping compaction, but that'll probably take a very
>> long time as well
>>
>> Manually stopping each node (one at a time) and removing the sstables
>> from only system.hints may be a better option. May want to take a snapshot
>> if you're very concerned with that data.
>>
>>
>>
>>
>> --
>> Jeff Jirsa
>>
>>
>> On May 16, 2017, at 6:53 PM, varun saluja <sa...@gmail.com> wrote:
>>
>> Hi,
>>
>>
>>  Truncatehints on nodes is running for more than 7 hours now. Nothing
>> mentioned for same in sysemt logs even.
>>
>> And compaction stats reports increase in hints total bytes.
>>
>> pending tasks: 1
>>    compaction type   keyspace   table     completed          total
>>  unit   progress
>>         Compaction     system   hints   12152557998 <(215)%20255-7998>
>> 869257869352   bytes      1.40%
>> Active compaction remaining time :   0h27m14s
>>
>> Can anything else be checked here? Will manually deleting system.hint
>> files and restart node fix this.
>>
>>
>>
>> Regards,
>> Varun Saluja
>>
>> On 16 May 2017 at 23:29, varun saluja <sa...@gmail.com> wrote:
>>
>>> Hi Jeff,
>>>
>>> I ran nodetool truncatehints  on all nodes. Its running for more than
>>> 30 mins now. Status for compactstats reports same.
>>>
>>> pending tasks: 1
>>>    compaction type   keyspace   table     completed          total
>>>  unit   progress
>>>         Compaction     system   hints   11189118129   851658989612
>>> bytes      1.31%
>>> Active compaction remaining time :   0h26m43s
>>>
>>> Will truncatehints takes time for completion? Could not see anything
>>> related truncatehints in system logs.
>>>
>>> Please let me know if anything else can be checked here.
>>>
>>> Regards,
>>> Varun Saluja
>>>
>>>
>>>
>>> On 16 May 2017 at 20:58, varun saluja <sa...@gmail.com> wrote:
>>>
>>>> Thanks a lot Jeff.
>>>>
>>>> You have explaned very well here. We have consitency as local quorum.
>>>> Will follow truncate hints and repair therafter.
>>>>
>>>> I hope this brings cluster in stable state
>>>>
>>>> Thanks again.
>>>>
>>>> Regards,
>>>> Varun Saluja
>>>>
>>>> Sent from my iPhone
>>>>
>>>> > On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
>>>> >
>>>> >
>>>> > In Cassandra versions up to 3.0, hints are stored within a table,
>>>> where the partition key is the host ID of the server for which the hints
>>>> are stored.
>>>> >
>>>> > In such a data model, accumulating 800GB of hints is almost certain
>>>> to cause very wide rows, which will in turn cause GC pressure when you
>>>> attempt to read the hints for delivery. This will cause GC pauses, which
>>>> will cause hints to fail to be delivered, which will cause more hints to be
>>>> stored. This is bad.
>>>> >
>>>> > In 3.0, hints were rewritten to work around this design flaw. In 2.1,
>>>> your most likely corrective course is to use 'nodetool truncatehints' on
>>>> all servers, followed by 'nodetool repair' to deliver the data you lost by
>>>> truncating the hints.
>>>> >
>>>> > NOTE: this is ONLY safe if you wrote with a consistency level
>>>> stronger than CL:ANY. If you wrote this data with CL:ANY, you may lose data
>>>> if you truncate hints.
>>>> >
>>>> > - Jeff
>>>> >
>>>> >> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com>
>>>> wrote:
>>>> >> Thanks for update.
>>>> >> I could see lot of io waits. This causing  Gc and mutation drops .
>>>> >> But as i mentioned we do not have high load for now. Hint replays
>>>> are creating such high disk I/O.
>>>> >> compactionstats show very high hint bytes like 780gb around. Is this
>>>> normal?
>>>> >>
>>>> >> Just mentioning we are using flash disks.
>>>> >>
>>>> >> In such case, if i run truncatehints , will it remove or decrease
>>>> size of hints bytes in compaction stats. I can trigger repair therafter.
>>>> >> Please let me know if any recommendation on same.
>>>> >>
>>>> >> Also , table which we dumped from kafka which created this much
>>>> hints and compaction pendings is also dropped today. Because we have to
>>>> redump table again once cluster is stable.
>>>> >>
>>>> >> Regards,
>>>> >> Varun
>>>> >>
>>>> >> Sent from my iPhone
>>>> >>
>>>> >>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>> >>>
>>>> >>> Yes but it means data has to be replicated using repair.
>>>> >>>
>>>> >>> Hints are out come of unhealthy nodes, focus on finding why you
>>>> have mutation drops, is it node, io or network etc. ideally you shouldn't
>>>> see increasing hints all the time.
>>>> >>>
>>>> >>> Sent from my iPhone
>>>> >>>
>>>> >>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com>
>>>> wrote:
>>>> >>>>
>>>> >>>> Hi Nitan,
>>>> >>>>
>>>> >>>> Thanks for response.
>>>> >>>>
>>>> >>>> Yes, I could see mutation drops and increase count in
>>>> system.hints. Is there any way , i can proceed to truncate hints like using
>>>> nodetool truncatehints.
>>>> >>>>
>>>> >>>>
>>>> >>>> Regards,
>>>> >>>> Varun Saluja
>>>> >>>>
>>>> >>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>> >>>>> Do you see mutation drops?
>>>> >>>>> Select count from system.hints; is it increasing?
>>>> >>>>>
>>>> >>>>> Sent from my iPhone
>>>> >>>>>
>>>> >>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com>
>>>> wrote:
>>>> >>>>>>
>>>> >>>>>> Hi Experts,
>>>> >>>>>>
>>>> >>>>>> We are facing issue on production cluster. Compaction on
>>>> system.hint table is running from last 2 days.
>>>> >>>>>>
>>>> >>>>>>
>>>> >>>>>> pending tasks: 1
>>>> >>>>>>   compaction type   keyspace   table     completed
>>>> total                      unit   progress
>>>> >>>>>>              Compaction     system   hints   20623021829
>>>>  877874092407   bytes      2.35%
>>>> >>>>>> Active compaction remaining time :   0h27m15s
>>>> >>>>>>
>>>> >>>>>>
>>>> >>>>>> Active compaction remaining time shows in minutes.  But, this is
>>>> job is running like indefinitely.
>>>> >>>>>>
>>>> >>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job
>>>> last week on particular table.
>>>> >>>>>> Compaction on this table finished but hint table size is growing
>>>> continuously.
>>>> >>>>>>
>>>> >>>>>> Can someone Please help me.
>>>> >>>>>>
>>>> >>>>>>
>>>> >>>>>> Thanks & Regards,
>>>> >>>>>> Varun Saluja
>>>> >>>>>>
>>>> >>>>
>>>> >>
>>>> >
>>>> > ---------------------------------------------------------------------
>>>> > To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
>>>> > For additional commands, e-mail: user-help@cassandra.apache.org
>>>> >
>>>>
>>>
>>>
>>
> --


*Ben Slater*

*Chief Product Officer <https://www.instaclustr.com/>*

<https://www.facebook.com/instaclustr>   <https://twitter.com/instaclustr>
<https://www.linkedin.com/company/instaclustr>

Read our latest technical blog posts here
<https://www.instaclustr.com/blog/>.

This email has been sent on behalf of Instaclustr Pty. Limited (Australia)
and Instaclustr Inc (USA).

This email and any attachments may contain confidential and legally
privileged information.  If you are not the intended recipient, do not copy
or disclose its content, but please reply to this email immediately and
highlight the error to the sender and then immediately delete the message.

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Hi All,
  
Can someone Please suggest any recommendations for write intensive jobs

Regards,
Varun Saluja
Sent from my iPhone

> On 17-May-2017, at 3:52 PM, varun saluja <sa...@gmail.com> wrote:
> 
> Thanks Jeff.
> 
> I have taken backup and did manual removal of hints with rolling restart. This brought cluster back in stable state.
> 
> Can you Please share some recommendation for write intensive job . Actually ,we need to load dump from kafka to 3 node cassandra cluster . Write TPS per node will be around 7k.
> 
> Can you Please suggest any parameter tuning for our use case here. We do not want to get stuck in similar situation of large compactions of hint or any other table where we are loading dump.
> 
> 
> Regards,
> Varun
> 
>> On 17 May 2017 at 09:17, Jeff Jirsa <jj...@gmail.com> wrote:
>> You could also try stopping compaction, but that'll probably take a very long time as well
>> 
>> Manually stopping each node (one at a time) and removing the sstables from only system.hints may be a better option. May want to take a snapshot if you're very concerned with that data.
>> 
>> 
>> 
>> 
>> -- 
>> Jeff Jirsa
>> 
>> 
>>> On May 16, 2017, at 6:53 PM, varun saluja <sa...@gmail.com> wrote:
>>> 
>>> Hi,
>>> 
>>>  
>>>  Truncatehints on nodes is running for more than 7 hours now. Nothing mentioned for same in sysemt logs even.
>>> 
>>> And compaction stats reports increase in hints total bytes.
>>> 
>>> pending tasks: 1
>>>    compaction type   keyspace   table     completed          total    unit   progress
>>>         Compaction     system   hints   12152557998   869257869352   bytes      1.40%
>>> Active compaction remaining time :   0h27m14s
>>> 
>>> Can anything else be checked here? Will manually deleting system.hint files and restart node fix this.
>>> 
>>> 
>>> 
>>> Regards,
>>> Varun Saluja
>>> 
>>>> On 16 May 2017 at 23:29, varun saluja <sa...@gmail.com> wrote:
>>>> Hi Jeff,
>>>> 
>>>> I ran nodetool truncatehints  on all nodes. Its running for more than 30 mins now. Status for compactstats reports same.
>>>> 
>>>> pending tasks: 1
>>>>    compaction type   keyspace   table     completed          total    unit   progress
>>>>         Compaction     system   hints   11189118129   851658989612   bytes      1.31%
>>>> Active compaction remaining time :   0h26m43s
>>>> 
>>>> Will truncatehints takes time for completion? Could not see anything related truncatehints in system logs.
>>>> 
>>>> Please let me know if anything else can be checked here.
>>>> 
>>>> Regards,
>>>> Varun Saluja 
>>>> 
>>>> 
>>>> 
>>>>> On 16 May 2017 at 20:58, varun saluja <sa...@gmail.com> wrote:
>>>>> Thanks a lot Jeff.
>>>>> 
>>>>> You have explaned very well here. We have consitency as local quorum. Will follow truncate hints and repair therafter.
>>>>> 
>>>>> I hope this brings cluster in stable state
>>>>> 
>>>>> Thanks again.
>>>>> 
>>>>> Regards,
>>>>> Varun Saluja
>>>>> 
>>>>> Sent from my iPhone
>>>>> 
>>>>> > On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
>>>>> >
>>>>> >
>>>>> > In Cassandra versions up to 3.0, hints are stored within a table, where the partition key is the host ID of the server for which the hints are stored.
>>>>> >
>>>>> > In such a data model, accumulating 800GB of hints is almost certain to cause very wide rows, which will in turn cause GC pressure when you attempt to read the hints for delivery. This will cause GC pauses, which will cause hints to fail to be delivered, which will cause more hints to be stored. This is bad.
>>>>> >
>>>>> > In 3.0, hints were rewritten to work around this design flaw. In 2.1, your most likely corrective course is to use 'nodetool truncatehints' on all servers, followed by 'nodetool repair' to deliver the data you lost by truncating the hints.
>>>>> >
>>>>> > NOTE: this is ONLY safe if you wrote with a consistency level stronger than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you truncate hints.
>>>>> >
>>>>> > - Jeff
>>>>> >
>>>>> >> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote:
>>>>> >> Thanks for update.
>>>>> >> I could see lot of io waits. This causing  Gc and mutation drops .
>>>>> >> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
>>>>> >> compactionstats show very high hint bytes like 780gb around. Is this normal?
>>>>> >>
>>>>> >> Just mentioning we are using flash disks.
>>>>> >>
>>>>> >> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
>>>>> >> Please let me know if any recommendation on same.
>>>>> >>
>>>>> >> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
>>>>> >>
>>>>> >> Regards,
>>>>> >> Varun
>>>>> >>
>>>>> >> Sent from my iPhone
>>>>> >>
>>>>> >>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>>> >>>
>>>>> >>> Yes but it means data has to be replicated using repair.
>>>>> >>>
>>>>> >>> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
>>>>> >>>
>>>>> >>> Sent from my iPhone
>>>>> >>>
>>>>> >>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>>>>> >>>>
>>>>> >>>> Hi Nitan,
>>>>> >>>>
>>>>> >>>> Thanks for response.
>>>>> >>>>
>>>>> >>>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>>>>> >>>>
>>>>> >>>>
>>>>> >>>> Regards,
>>>>> >>>> Varun Saluja
>>>>> >>>>
>>>>> >>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>>> >>>>> Do you see mutation drops?
>>>>> >>>>> Select count from system.hints; is it increasing?
>>>>> >>>>>
>>>>> >>>>> Sent from my iPhone
>>>>> >>>>>
>>>>> >>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>>> >>>>>>
>>>>> >>>>>> Hi Experts,
>>>>> >>>>>>
>>>>> >>>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>> pending tasks: 1
>>>>> >>>>>>   compaction type   keyspace   table     completed          total                      unit   progress
>>>>> >>>>>>              Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>>> >>>>>> Active compaction remaining time :   0h27m15s
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>>> >>>>>>
>>>>> >>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>>> >>>>>> Compaction on this table finished but hint table size is growing continuously.
>>>>> >>>>>>
>>>>> >>>>>> Can someone Please help me.
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>> Thanks & Regards,
>>>>> >>>>>> Varun Saluja
>>>>> >>>>>>
>>>>> >>>>
>>>>> >>
>>>>> >
>>>>> > ---------------------------------------------------------------------
>>>>> > To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
>>>>> > For additional commands, e-mail: user-help@cassandra.apache.org
>>>>> >
>>>> 
>>> 
> 

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Thanks Jeff.

I have taken backup and did manual removal of hints with rolling restart.
This brought cluster back in stable state.

Can you Please share some recommendation for write intensive job . Actually
,we need to load dump from kafka to 3 node cassandra cluster . Write TPS
per node will be around 7k.

Can you Please suggest any parameter tuning for our use case here. We do
not want to get stuck in similar situation of large compactions of hint or
any other table where we are loading dump.


Regards,
Varun

On 17 May 2017 at 09:17, Jeff Jirsa <jj...@gmail.com> wrote:

> You could also try stopping compaction, but that'll probably take a very
> long time as well
>
> Manually stopping each node (one at a time) and removing the sstables from
> only system.hints may be a better option. May want to take a snapshot if
> you're very concerned with that data.
>
>
>
>
> --
> Jeff Jirsa
>
>
> On May 16, 2017, at 6:53 PM, varun saluja <sa...@gmail.com> wrote:
>
> Hi,
>
>
>  Truncatehints on nodes is running for more than 7 hours now. Nothing
> mentioned for same in sysemt logs even.
>
> And compaction stats reports increase in hints total bytes.
>
> pending tasks: 1
>    compaction type   keyspace   table     completed          total    unit
>   progress
>         Compaction     system   hints   12152557998   869257869352   bytes
>      1.40%
> Active compaction remaining time :   0h27m14s
>
> Can anything else be checked here? Will manually deleting system.hint
> files and restart node fix this.
>
>
>
> Regards,
> Varun Saluja
>
> On 16 May 2017 at 23:29, varun saluja <sa...@gmail.com> wrote:
>
>> Hi Jeff,
>>
>> I ran nodetool truncatehints  on all nodes. Its running for more than 30
>> mins now. Status for compactstats reports same.
>>
>> pending tasks: 1
>>    compaction type   keyspace   table     completed          total
>>  unit   progress
>>         Compaction     system   hints   11189118129   851658989612
>> bytes      1.31%
>> Active compaction remaining time :   0h26m43s
>>
>> Will truncatehints takes time for completion? Could not see anything
>> related truncatehints in system logs.
>>
>> Please let me know if anything else can be checked here.
>>
>> Regards,
>> Varun Saluja
>>
>>
>>
>> On 16 May 2017 at 20:58, varun saluja <sa...@gmail.com> wrote:
>>
>>> Thanks a lot Jeff.
>>>
>>> You have explaned very well here. We have consitency as local quorum.
>>> Will follow truncate hints and repair therafter.
>>>
>>> I hope this brings cluster in stable state
>>>
>>> Thanks again.
>>>
>>> Regards,
>>> Varun Saluja
>>>
>>> Sent from my iPhone
>>>
>>> > On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
>>> >
>>> >
>>> > In Cassandra versions up to 3.0, hints are stored within a table,
>>> where the partition key is the host ID of the server for which the hints
>>> are stored.
>>> >
>>> > In such a data model, accumulating 800GB of hints is almost certain to
>>> cause very wide rows, which will in turn cause GC pressure when you attempt
>>> to read the hints for delivery. This will cause GC pauses, which will cause
>>> hints to fail to be delivered, which will cause more hints to be stored.
>>> This is bad.
>>> >
>>> > In 3.0, hints were rewritten to work around this design flaw. In 2.1,
>>> your most likely corrective course is to use 'nodetool truncatehints' on
>>> all servers, followed by 'nodetool repair' to deliver the data you lost by
>>> truncating the hints.
>>> >
>>> > NOTE: this is ONLY safe if you wrote with a consistency level stronger
>>> than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you
>>> truncate hints.
>>> >
>>> > - Jeff
>>> >
>>> >> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote:
>>> >> Thanks for update.
>>> >> I could see lot of io waits. This causing  Gc and mutation drops .
>>> >> But as i mentioned we do not have high load for now. Hint replays are
>>> creating such high disk I/O.
>>> >> compactionstats show very high hint bytes like 780gb around. Is this
>>> normal?
>>> >>
>>> >> Just mentioning we are using flash disks.
>>> >>
>>> >> In such case, if i run truncatehints , will it remove or decrease
>>> size of hints bytes in compaction stats. I can trigger repair therafter.
>>> >> Please let me know if any recommendation on same.
>>> >>
>>> >> Also , table which we dumped from kafka which created this much hints
>>> and compaction pendings is also dropped today. Because we have to redump
>>> table again once cluster is stable.
>>> >>
>>> >> Regards,
>>> >> Varun
>>> >>
>>> >> Sent from my iPhone
>>> >>
>>> >>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> >>>
>>> >>> Yes but it means data has to be replicated using repair.
>>> >>>
>>> >>> Hints are out come of unhealthy nodes, focus on finding why you have
>>> mutation drops, is it node, io or network etc. ideally you shouldn't see
>>> increasing hints all the time.
>>> >>>
>>> >>> Sent from my iPhone
>>> >>>
>>> >>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com>
>>> wrote:
>>> >>>>
>>> >>>> Hi Nitan,
>>> >>>>
>>> >>>> Thanks for response.
>>> >>>>
>>> >>>> Yes, I could see mutation drops and increase count in system.hints.
>>> Is there any way , i can proceed to truncate hints like using nodetool
>>> truncatehints.
>>> >>>>
>>> >>>>
>>> >>>> Regards,
>>> >>>> Varun Saluja
>>> >>>>
>>> >>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> >>>>> Do you see mutation drops?
>>> >>>>> Select count from system.hints; is it increasing?
>>> >>>>>
>>> >>>>> Sent from my iPhone
>>> >>>>>
>>> >>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com>
>>> wrote:
>>> >>>>>>
>>> >>>>>> Hi Experts,
>>> >>>>>>
>>> >>>>>> We are facing issue on production cluster. Compaction on
>>> system.hint table is running from last 2 days.
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> pending tasks: 1
>>> >>>>>>   compaction type   keyspace   table     completed
>>> total                      unit   progress
>>> >>>>>>              Compaction     system   hints   20623021829
>>>  877874092407   bytes      2.35%
>>> >>>>>> Active compaction remaining time :   0h27m15s
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> Active compaction remaining time shows in minutes.  But, this is
>>> job is running like indefinitely.
>>> >>>>>>
>>> >>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job
>>> last week on particular table.
>>> >>>>>> Compaction on this table finished but hint table size is growing
>>> continuously.
>>> >>>>>>
>>> >>>>>> Can someone Please help me.
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> Thanks & Regards,
>>> >>>>>> Varun Saluja
>>> >>>>>>
>>> >>>>
>>> >>
>>> >
>>> > ---------------------------------------------------------------------
>>> > To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
>>> > For additional commands, e-mail: user-help@cassandra.apache.org
>>> >
>>>
>>
>>
>

Re: Long running compaction on huge hint table.

Posted by Jeff Jirsa <jj...@gmail.com>.
You could also try stopping compaction, but that'll probably take a very long time as well

Manually stopping each node (one at a time) and removing the sstables from only system.hints may be a better option. May want to take a snapshot if you're very concerned with that data.




-- 
Jeff Jirsa


> On May 16, 2017, at 6:53 PM, varun saluja <sa...@gmail.com> wrote:
> 
> Hi,
> 
>  
>  Truncatehints on nodes is running for more than 7 hours now. Nothing mentioned for same in sysemt logs even.
> 
> And compaction stats reports increase in hints total bytes.
> 
> pending tasks: 1
>    compaction type   keyspace   table     completed          total    unit   progress
>         Compaction     system   hints   12152557998   869257869352   bytes      1.40%
> Active compaction remaining time :   0h27m14s
> 
> Can anything else be checked here? Will manually deleting system.hint files and restart node fix this.
> 
> 
> 
> Regards,
> Varun Saluja
> 
>> On 16 May 2017 at 23:29, varun saluja <sa...@gmail.com> wrote:
>> Hi Jeff,
>> 
>> I ran nodetool truncatehints  on all nodes. Its running for more than 30 mins now. Status for compactstats reports same.
>> 
>> pending tasks: 1
>>    compaction type   keyspace   table     completed          total    unit   progress
>>         Compaction     system   hints   11189118129   851658989612   bytes      1.31%
>> Active compaction remaining time :   0h26m43s
>> 
>> Will truncatehints takes time for completion? Could not see anything related truncatehints in system logs.
>> 
>> Please let me know if anything else can be checked here.
>> 
>> Regards,
>> Varun Saluja 
>> 
>> 
>> 
>>> On 16 May 2017 at 20:58, varun saluja <sa...@gmail.com> wrote:
>>> Thanks a lot Jeff.
>>> 
>>> You have explaned very well here. We have consitency as local quorum. Will follow truncate hints and repair therafter.
>>> 
>>> I hope this brings cluster in stable state
>>> 
>>> Thanks again.
>>> 
>>> Regards,
>>> Varun Saluja
>>> 
>>> Sent from my iPhone
>>> 
>>> > On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
>>> >
>>> >
>>> > In Cassandra versions up to 3.0, hints are stored within a table, where the partition key is the host ID of the server for which the hints are stored.
>>> >
>>> > In such a data model, accumulating 800GB of hints is almost certain to cause very wide rows, which will in turn cause GC pressure when you attempt to read the hints for delivery. This will cause GC pauses, which will cause hints to fail to be delivered, which will cause more hints to be stored. This is bad.
>>> >
>>> > In 3.0, hints were rewritten to work around this design flaw. In 2.1, your most likely corrective course is to use 'nodetool truncatehints' on all servers, followed by 'nodetool repair' to deliver the data you lost by truncating the hints.
>>> >
>>> > NOTE: this is ONLY safe if you wrote with a consistency level stronger than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you truncate hints.
>>> >
>>> > - Jeff
>>> >
>>> >> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote:
>>> >> Thanks for update.
>>> >> I could see lot of io waits. This causing  Gc and mutation drops .
>>> >> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
>>> >> compactionstats show very high hint bytes like 780gb around. Is this normal?
>>> >>
>>> >> Just mentioning we are using flash disks.
>>> >>
>>> >> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
>>> >> Please let me know if any recommendation on same.
>>> >>
>>> >> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
>>> >>
>>> >> Regards,
>>> >> Varun
>>> >>
>>> >> Sent from my iPhone
>>> >>
>>> >>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> >>>
>>> >>> Yes but it means data has to be replicated using repair.
>>> >>>
>>> >>> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
>>> >>>
>>> >>> Sent from my iPhone
>>> >>>
>>> >>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>>> >>>>
>>> >>>> Hi Nitan,
>>> >>>>
>>> >>>> Thanks for response.
>>> >>>>
>>> >>>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>>> >>>>
>>> >>>>
>>> >>>> Regards,
>>> >>>> Varun Saluja
>>> >>>>
>>> >>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> >>>>> Do you see mutation drops?
>>> >>>>> Select count from system.hints; is it increasing?
>>> >>>>>
>>> >>>>> Sent from my iPhone
>>> >>>>>
>>> >>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>> >>>>>>
>>> >>>>>> Hi Experts,
>>> >>>>>>
>>> >>>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> pending tasks: 1
>>> >>>>>>   compaction type   keyspace   table     completed          total                      unit   progress
>>> >>>>>>              Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>> >>>>>> Active compaction remaining time :   0h27m15s
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>> >>>>>>
>>> >>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>> >>>>>> Compaction on this table finished but hint table size is growing continuously.
>>> >>>>>>
>>> >>>>>> Can someone Please help me.
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> Thanks & Regards,
>>> >>>>>> Varun Saluja
>>> >>>>>>
>>> >>>>
>>> >>
>>> >
>>> > ---------------------------------------------------------------------
>>> > To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
>>> > For additional commands, e-mail: user-help@cassandra.apache.org
>>> >
>> 
> 

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Hi,


 Truncatehints on nodes is running for more than 7 hours now. Nothing
mentioned for same in sysemt logs even.

And compaction stats reports increase in hints total bytes.

pending tasks: 1
   compaction type   keyspace   table     completed          total    unit
  progress
        Compaction     system   hints   12152557998   869257869352   bytes
     1.40%
Active compaction remaining time :   0h27m14s

Can anything else be checked here? Will manually deleting system.hint files
and restart node fix this.



Regards,
Varun Saluja

On 16 May 2017 at 23:29, varun saluja <sa...@gmail.com> wrote:

> Hi Jeff,
>
> I ran nodetool truncatehints  on all nodes. Its running for more than 30
> mins now. Status for compactstats reports same.
>
> pending tasks: 1
>    compaction type   keyspace   table     completed          total    unit
>   progress
>         Compaction     system   hints   11189118129   851658989612   bytes
>      1.31%
> Active compaction remaining time :   0h26m43s
>
> Will truncatehints takes time for completion? Could not see anything
> related truncatehints in system logs.
>
> Please let me know if anything else can be checked here.
>
> Regards,
> Varun Saluja
>
>
>
> On 16 May 2017 at 20:58, varun saluja <sa...@gmail.com> wrote:
>
>> Thanks a lot Jeff.
>>
>> You have explaned very well here. We have consitency as local quorum.
>> Will follow truncate hints and repair therafter.
>>
>> I hope this brings cluster in stable state
>>
>> Thanks again.
>>
>> Regards,
>> Varun Saluja
>>
>> Sent from my iPhone
>>
>> > On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
>> >
>> >
>> > In Cassandra versions up to 3.0, hints are stored within a table, where
>> the partition key is the host ID of the server for which the hints are
>> stored.
>> >
>> > In such a data model, accumulating 800GB of hints is almost certain to
>> cause very wide rows, which will in turn cause GC pressure when you attempt
>> to read the hints for delivery. This will cause GC pauses, which will cause
>> hints to fail to be delivered, which will cause more hints to be stored.
>> This is bad.
>> >
>> > In 3.0, hints were rewritten to work around this design flaw. In 2.1,
>> your most likely corrective course is to use 'nodetool truncatehints' on
>> all servers, followed by 'nodetool repair' to deliver the data you lost by
>> truncating the hints.
>> >
>> > NOTE: this is ONLY safe if you wrote with a consistency level stronger
>> than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you
>> truncate hints.
>> >
>> > - Jeff
>> >
>> >> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote:
>> >> Thanks for update.
>> >> I could see lot of io waits. This causing  Gc and mutation drops .
>> >> But as i mentioned we do not have high load for now. Hint replays are
>> creating such high disk I/O.
>> >> compactionstats show very high hint bytes like 780gb around. Is this
>> normal?
>> >>
>> >> Just mentioning we are using flash disks.
>> >>
>> >> In such case, if i run truncatehints , will it remove or decrease size
>> of hints bytes in compaction stats. I can trigger repair therafter.
>> >> Please let me know if any recommendation on same.
>> >>
>> >> Also , table which we dumped from kafka which created this much hints
>> and compaction pendings is also dropped today. Because we have to redump
>> table again once cluster is stable.
>> >>
>> >> Regards,
>> >> Varun
>> >>
>> >> Sent from my iPhone
>> >>
>> >>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>> >>>
>> >>> Yes but it means data has to be replicated using repair.
>> >>>
>> >>> Hints are out come of unhealthy nodes, focus on finding why you have
>> mutation drops, is it node, io or network etc. ideally you shouldn't see
>> increasing hints all the time.
>> >>>
>> >>> Sent from my iPhone
>> >>>
>> >>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com>
>> wrote:
>> >>>>
>> >>>> Hi Nitan,
>> >>>>
>> >>>> Thanks for response.
>> >>>>
>> >>>> Yes, I could see mutation drops and increase count in system.hints.
>> Is there any way , i can proceed to truncate hints like using nodetool
>> truncatehints.
>> >>>>
>> >>>>
>> >>>> Regards,
>> >>>> Varun Saluja
>> >>>>
>> >>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>> >>>>> Do you see mutation drops?
>> >>>>> Select count from system.hints; is it increasing?
>> >>>>>
>> >>>>> Sent from my iPhone
>> >>>>>
>> >>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com>
>> wrote:
>> >>>>>>
>> >>>>>> Hi Experts,
>> >>>>>>
>> >>>>>> We are facing issue on production cluster. Compaction on
>> system.hint table is running from last 2 days.
>> >>>>>>
>> >>>>>>
>> >>>>>> pending tasks: 1
>> >>>>>>   compaction type   keyspace   table     completed          total
>>                     unit   progress
>> >>>>>>              Compaction     system   hints   20623021829
>>  877874092407   bytes      2.35%
>> >>>>>> Active compaction remaining time :   0h27m15s
>> >>>>>>
>> >>>>>>
>> >>>>>> Active compaction remaining time shows in minutes.  But, this is
>> job is running like indefinitely.
>> >>>>>>
>> >>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job
>> last week on particular table.
>> >>>>>> Compaction on this table finished but hint table size is growing
>> continuously.
>> >>>>>>
>> >>>>>> Can someone Please help me.
>> >>>>>>
>> >>>>>>
>> >>>>>> Thanks & Regards,
>> >>>>>> Varun Saluja
>> >>>>>>
>> >>>>
>> >>
>> >
>> > ---------------------------------------------------------------------
>> > To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
>> > For additional commands, e-mail: user-help@cassandra.apache.org
>> >
>>
>
>

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Hi Jeff,

I ran nodetool truncatehints  on all nodes. Its running for more than 30
mins now. Status for compactstats reports same.

pending tasks: 1
   compaction type   keyspace   table     completed          total    unit
  progress
        Compaction     system   hints   11189118129   851658989612   bytes
     1.31%
Active compaction remaining time :   0h26m43s

Will truncatehints takes time for completion? Could not see anything
related truncatehints in system logs.

Please let me know if anything else can be checked here.

Regards,
Varun Saluja



On 16 May 2017 at 20:58, varun saluja <sa...@gmail.com> wrote:

> Thanks a lot Jeff.
>
> You have explaned very well here. We have consitency as local quorum. Will
> follow truncate hints and repair therafter.
>
> I hope this brings cluster in stable state
>
> Thanks again.
>
> Regards,
> Varun Saluja
>
> Sent from my iPhone
>
> > On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
> >
> >
> > In Cassandra versions up to 3.0, hints are stored within a table, where
> the partition key is the host ID of the server for which the hints are
> stored.
> >
> > In such a data model, accumulating 800GB of hints is almost certain to
> cause very wide rows, which will in turn cause GC pressure when you attempt
> to read the hints for delivery. This will cause GC pauses, which will cause
> hints to fail to be delivered, which will cause more hints to be stored.
> This is bad.
> >
> > In 3.0, hints were rewritten to work around this design flaw. In 2.1,
> your most likely corrective course is to use 'nodetool truncatehints' on
> all servers, followed by 'nodetool repair' to deliver the data you lost by
> truncating the hints.
> >
> > NOTE: this is ONLY safe if you wrote with a consistency level stronger
> than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you
> truncate hints.
> >
> > - Jeff
> >
> >> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote:
> >> Thanks for update.
> >> I could see lot of io waits. This causing  Gc and mutation drops .
> >> But as i mentioned we do not have high load for now. Hint replays are
> creating such high disk I/O.
> >> compactionstats show very high hint bytes like 780gb around. Is this
> normal?
> >>
> >> Just mentioning we are using flash disks.
> >>
> >> In such case, if i run truncatehints , will it remove or decrease size
> of hints bytes in compaction stats. I can trigger repair therafter.
> >> Please let me know if any recommendation on same.
> >>
> >> Also , table which we dumped from kafka which created this much hints
> and compaction pendings is also dropped today. Because we have to redump
> table again once cluster is stable.
> >>
> >> Regards,
> >> Varun
> >>
> >> Sent from my iPhone
> >>
> >>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
> >>>
> >>> Yes but it means data has to be replicated using repair.
> >>>
> >>> Hints are out come of unhealthy nodes, focus on finding why you have
> mutation drops, is it node, io or network etc. ideally you shouldn't see
> increasing hints all the time.
> >>>
> >>> Sent from my iPhone
> >>>
> >>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
> >>>>
> >>>> Hi Nitan,
> >>>>
> >>>> Thanks for response.
> >>>>
> >>>> Yes, I could see mutation drops and increase count in system.hints.
> Is there any way , i can proceed to truncate hints like using nodetool
> truncatehints.
> >>>>
> >>>>
> >>>> Regards,
> >>>> Varun Saluja
> >>>>
> >>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
> >>>>> Do you see mutation drops?
> >>>>> Select count from system.hints; is it increasing?
> >>>>>
> >>>>> Sent from my iPhone
> >>>>>
> >>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com>
> wrote:
> >>>>>>
> >>>>>> Hi Experts,
> >>>>>>
> >>>>>> We are facing issue on production cluster. Compaction on
> system.hint table is running from last 2 days.
> >>>>>>
> >>>>>>
> >>>>>> pending tasks: 1
> >>>>>>   compaction type   keyspace   table     completed          total
>                     unit   progress
> >>>>>>              Compaction     system   hints   20623021829
>  877874092407   bytes      2.35%
> >>>>>> Active compaction remaining time :   0h27m15s
> >>>>>>
> >>>>>>
> >>>>>> Active compaction remaining time shows in minutes.  But, this is
> job is running like indefinitely.
> >>>>>>
> >>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job
> last week on particular table.
> >>>>>> Compaction on this table finished but hint table size is growing
> continuously.
> >>>>>>
> >>>>>> Can someone Please help me.
> >>>>>>
> >>>>>>
> >>>>>> Thanks & Regards,
> >>>>>> Varun Saluja
> >>>>>>
> >>>>
> >>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
> > For additional commands, e-mail: user-help@cassandra.apache.org
> >
>

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Thanks a lot Jeff.

You have explaned very well here. We have consitency as local quorum. Will follow truncate hints and repair therafter.

I hope this brings cluster in stable state

Thanks again.

Regards,
Varun Saluja

Sent from my iPhone

> On 16-May-2017, at 8:42 PM, Jeff Jirsa <jj...@apache.org> wrote:
> 
> 
> In Cassandra versions up to 3.0, hints are stored within a table, where the partition key is the host ID of the server for which the hints are stored.
> 
> In such a data model, accumulating 800GB of hints is almost certain to cause very wide rows, which will in turn cause GC pressure when you attempt to read the hints for delivery. This will cause GC pauses, which will cause hints to fail to be delivered, which will cause more hints to be stored. This is bad.
> 
> In 3.0, hints were rewritten to work around this design flaw. In 2.1, your most likely corrective course is to use 'nodetool truncatehints' on all servers, followed by 'nodetool repair' to deliver the data you lost by truncating the hints.
> 
> NOTE: this is ONLY safe if you wrote with a consistency level stronger than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you truncate hints.
> 
> - Jeff
> 
>> On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote: 
>> Thanks for update.
>> I could see lot of io waits. This causing  Gc and mutation drops .
>> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
>> compactionstats show very high hint bytes like 780gb around. Is this normal?
>> 
>> Just mentioning we are using flash disks.
>> 
>> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
>> Please let me know if any recommendation on same.
>> 
>> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
>> 
>> Regards,
>> Varun
>> 
>> Sent from my iPhone
>> 
>>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> 
>>> Yes but it means data has to be replicated using repair.
>>> 
>>> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
>>> 
>>> Sent from my iPhone
>>> 
>>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>>>> 
>>>> Hi Nitan,
>>>> 
>>>> Thanks for response.
>>>> 
>>>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>>>> 
>>>> 
>>>> Regards,
>>>> Varun Saluja
>>>> 
>>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>>> Do you see mutation drops?
>>>>> Select count from system.hints; is it increasing?
>>>>> 
>>>>> Sent from my iPhone
>>>>> 
>>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>>>> 
>>>>>> Hi Experts,
>>>>>> 
>>>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>>>> 
>>>>>> 
>>>>>> pending tasks: 1
>>>>>>   compaction type   keyspace   table     completed          total                      unit   progress
>>>>>>              Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>>>> Active compaction remaining time :   0h27m15s
>>>>>> 
>>>>>> 
>>>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>>>> 
>>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>>>> Compaction on this table finished but hint table size is growing continuously.
>>>>>> 
>>>>>> Can someone Please help me.
>>>>>> 
>>>>>> 
>>>>>> Thanks & Regards,
>>>>>> Varun Saluja
>>>>>> 
>>>> 
>> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
> For additional commands, e-mail: user-help@cassandra.apache.org
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
For additional commands, e-mail: user-help@cassandra.apache.org


Re: Long running compaction on huge hint table.

Posted by Jeff Jirsa <jj...@apache.org>.
In Cassandra versions up to 3.0, hints are stored within a table, where the partition key is the host ID of the server for which the hints are stored.

In such a data model, accumulating 800GB of hints is almost certain to cause very wide rows, which will in turn cause GC pressure when you attempt to read the hints for delivery. This will cause GC pauses, which will cause hints to fail to be delivered, which will cause more hints to be stored. This is bad.

In 3.0, hints were rewritten to work around this design flaw. In 2.1, your most likely corrective course is to use 'nodetool truncatehints' on all servers, followed by 'nodetool repair' to deliver the data you lost by truncating the hints.

NOTE: this is ONLY safe if you wrote with a consistency level stronger than CL:ANY. If you wrote this data with CL:ANY, you may lose data if you truncate hints.

- Jeff

On 2017-05-16 06:50 (-0700), varun saluja <sa...@gmail.com> wrote: 
> Thanks for update.
> I could see lot of io waits. This causing  Gc and mutation drops .
> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
> compactionstats show very high hint bytes like 780gb around. Is this normal?
> 
> Just mentioning we are using flash disks.
> 
> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
> Please let me know if any recommendation on same.
> 
> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
> 
> Regards,
> Varun
> 
> Sent from my iPhone
> 
> > On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
> > 
> > Yes but it means data has to be replicated using repair.
> > 
> > Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
> > 
> > Sent from my iPhone
> > 
> >> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
> >> 
> >> Hi Nitan,
> >> 
> >> Thanks for response.
> >> 
> >> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
> >> 
> >> 
> >> Regards,
> >> Varun Saluja
> >> 
> >>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
> >>> Do you see mutation drops?
> >>> Select count from system.hints; is it increasing?
> >>> 
> >>> Sent from my iPhone
> >>> 
> >>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
> >>>> 
> >>>> Hi Experts,
> >>>> 
> >>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
> >>>> 
> >>>> 
> >>>> pending tasks: 1
> >>>>    compaction type   keyspace   table     completed          total                      unit   progress
> >>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
> >>>> Active compaction remaining time :   0h27m15s
> >>>> 
> >>>> 
> >>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
> >>>> 
> >>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
> >>>> Compaction on this table finished but hint table size is growing continuously.
> >>>> 
> >>>> Can someone Please help me.
> >>>> 
> >>>> 
> >>>> Thanks & Regards,
> >>>> Varun Saluja
> >>>> 
> >> 
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@cassandra.apache.org
For additional commands, e-mail: user-help@cassandra.apache.org


Re: Long running compaction on huge hint table.

Posted by Nitan Kainth <ni...@bamlabs.com>.
You can control compaction with nodetool compactionthroughput but it will just slow down compaction and give resources for application, however it's not a fix.

Sent from my iPhone

> On May 16, 2017, at 9:15 AM, varun saluja <sa...@gmail.com> wrote:
> 
> Thanks Nitan.
> Appreciate your help.
> 
> Can anyone suggest parameter change or something which can help in this situation.
> 
> Regards,
> Varun 
> 
> Sent from my iPhone
> 
>> On 16-May-2017, at 7:31 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>> 
>> If target table is dropped then you can remove its hints but there could be more hints from other table. If it has tables of your interest , then I won't comment on truncating hints.
>> 
>> Size of hints depends on Kafka load , looks like you had overloaded the cluster during data load and not hints are just recovering from it. I would say wait until cluster comes to normal state. May be some other expert can suggest an alternate.
>> 
>> Sent from my iPhone
>> 
>>> On May 16, 2017, at 8:50 AM, varun saluja <sa...@gmail.com> wrote:
>>> 
>>> Thanks for update.
>>> I could see lot of io waits. This causing  Gc and mutation drops .
>>> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
>>> compactionstats show very high hint bytes like 780gb around. Is this normal?
>>> 
>>> Just mentioning we are using flash disks.
>>> 
>>> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
>>> Please let me know if any recommendation on same.
>>> 
>>> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
>>> 
>>> Regards,
>>> Varun
>>> 
>>> Sent from my iPhone
>>> 
>>>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>> 
>>>> Yes but it means data has to be replicated using repair.
>>>> 
>>>> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>>>>> 
>>>>> Hi Nitan,
>>>>> 
>>>>> Thanks for response.
>>>>> 
>>>>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>>>>> 
>>>>> 
>>>>> Regards,
>>>>> Varun Saluja
>>>>> 
>>>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>>>> Do you see mutation drops?
>>>>>> Select count from system.hints; is it increasing?
>>>>>> 
>>>>>> Sent from my iPhone
>>>>>> 
>>>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>>>>> 
>>>>>>> Hi Experts,
>>>>>>> 
>>>>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>>>>> 
>>>>>>> 
>>>>>>> pending tasks: 1
>>>>>>>    compaction type   keyspace   table     completed          total                      unit   progress
>>>>>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>>>>> Active compaction remaining time :   0h27m15s
>>>>>>> 
>>>>>>> 
>>>>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>>>>> 
>>>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>>>>> Compaction on this table finished but hint table size is growing continuously.
>>>>>>> 
>>>>>>> Can someone Please help me.
>>>>>>> 
>>>>>>> 
>>>>>>> Thanks & Regards,
>>>>>>> Varun Saluja
>>>>>>> 
>>>>> 

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Thanks Nitan.
Appreciate your help.

Can anyone suggest parameter change or something which can help in this situation.

Regards,
Varun 

Sent from my iPhone

> On 16-May-2017, at 7:31 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
> 
> If target table is dropped then you can remove its hints but there could be more hints from other table. If it has tables of your interest , then I won't comment on truncating hints.
> 
> Size of hints depends on Kafka load , looks like you had overloaded the cluster during data load and not hints are just recovering from it. I would say wait until cluster comes to normal state. May be some other expert can suggest an alternate.
> 
> Sent from my iPhone
> 
>> On May 16, 2017, at 8:50 AM, varun saluja <sa...@gmail.com> wrote:
>> 
>> Thanks for update.
>> I could see lot of io waits. This causing  Gc and mutation drops .
>> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
>> compactionstats show very high hint bytes like 780gb around. Is this normal?
>> 
>> Just mentioning we are using flash disks.
>> 
>> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
>> Please let me know if any recommendation on same.
>> 
>> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
>> 
>> Regards,
>> Varun
>> 
>> Sent from my iPhone
>> 
>>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> 
>>> Yes but it means data has to be replicated using repair.
>>> 
>>> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
>>> 
>>> Sent from my iPhone
>>> 
>>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>>>> 
>>>> Hi Nitan,
>>>> 
>>>> Thanks for response.
>>>> 
>>>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>>>> 
>>>> 
>>>> Regards,
>>>> Varun Saluja
>>>> 
>>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>>> Do you see mutation drops?
>>>>> Select count from system.hints; is it increasing?
>>>>> 
>>>>> Sent from my iPhone
>>>>> 
>>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>>>> 
>>>>>> Hi Experts,
>>>>>> 
>>>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>>>> 
>>>>>> 
>>>>>> pending tasks: 1
>>>>>>    compaction type   keyspace   table     completed          total                      unit   progress
>>>>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>>>> Active compaction remaining time :   0h27m15s
>>>>>> 
>>>>>> 
>>>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>>>> 
>>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>>>> Compaction on this table finished but hint table size is growing continuously.
>>>>>> 
>>>>>> Can someone Please help me.
>>>>>> 
>>>>>> 
>>>>>> Thanks & Regards,
>>>>>> Varun Saluja
>>>>>> 
>>>> 

Re: Long running compaction on huge hint table.

Posted by Nitan Kainth <ni...@bamlabs.com>.
If target table is dropped then you can remove its hints but there could be more hints from other table. If it has tables of your interest , then I won't comment on truncating hints.

Size of hints depends on Kafka load , looks like you had overloaded the cluster during data load and not hints are just recovering from it. I would say wait until cluster comes to normal state. May be some other expert can suggest an alternate.

Sent from my iPhone

> On May 16, 2017, at 8:50 AM, varun saluja <sa...@gmail.com> wrote:
> 
> Thanks for update.
> I could see lot of io waits. This causing  Gc and mutation drops .
> But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
> compactionstats show very high hint bytes like 780gb around. Is this normal?
> 
> Just mentioning we are using flash disks.
> 
> In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
> Please let me know if any recommendation on same.
> 
> Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.
> 
> Regards,
> Varun
> 
> Sent from my iPhone
> 
>> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
>> 
>> Yes but it means data has to be replicated using repair.
>> 
>> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
>> 
>> Sent from my iPhone
>> 
>>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>>> 
>>> Hi Nitan,
>>> 
>>> Thanks for response.
>>> 
>>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>>> 
>>> 
>>> Regards,
>>> Varun Saluja
>>> 
>>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>>> Do you see mutation drops?
>>>> Select count from system.hints; is it increasing?
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>>> 
>>>>> Hi Experts,
>>>>> 
>>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>>> 
>>>>> 
>>>>> pending tasks: 1
>>>>>    compaction type   keyspace   table     completed          total                      unit   progress
>>>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>>> Active compaction remaining time :   0h27m15s
>>>>> 
>>>>> 
>>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>>> 
>>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>>> Compaction on this table finished but hint table size is growing continuously.
>>>>> 
>>>>> Can someone Please help me.
>>>>> 
>>>>> 
>>>>> Thanks & Regards,
>>>>> Varun Saluja
>>>>> 
>>> 

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Thanks for update.
I could see lot of io waits. This causing  Gc and mutation drops .
But as i mentioned we do not have high load for now. Hint replays are creating such high disk I/O.
compactionstats show very high hint bytes like 780gb around. Is this normal?

Just mentioning we are using flash disks.

In such case, if i run truncatehints , will it remove or decrease size of hints bytes in compaction stats. I can trigger repair therafter.
Please let me know if any recommendation on same.

Also , table which we dumped from kafka which created this much hints and compaction pendings is also dropped today. Because we have to redump table again once cluster is stable.

Regards,
Varun

Sent from my iPhone

> On 16-May-2017, at 6:59 PM, Nitan Kainth <ni...@bamlabs.com> wrote:
> 
> Yes but it means data has to be replicated using repair.
> 
> Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.
> 
> Sent from my iPhone
> 
>> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
>> 
>> Hi Nitan,
>> 
>> Thanks for response.
>> 
>> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
>> 
>> 
>> Regards,
>> Varun Saluja
>> 
>>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>>> Do you see mutation drops?
>>> Select count from system.hints; is it increasing?
>>> 
>>> Sent from my iPhone
>>> 
>>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>>> 
>>>> Hi Experts,
>>>> 
>>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>>> 
>>>> 
>>>> pending tasks: 1
>>>>    compaction type   keyspace   table     completed          total                      unit   progress
>>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>>> Active compaction remaining time :   0h27m15s
>>>> 
>>>> 
>>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>>> 
>>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>>> Compaction on this table finished but hint table size is growing continuously.
>>>> 
>>>> Can someone Please help me.
>>>> 
>>>> 
>>>> Thanks & Regards,
>>>> Varun Saluja
>>>> 
>> 

Re: Long running compaction on huge hint table.

Posted by Nitan Kainth <ni...@bamlabs.com>.
Yes but it means data has to be replicated using repair.

Hints are out come of unhealthy nodes, focus on finding why you have mutation drops, is it node, io or network etc. ideally you shouldn't see increasing hints all the time.

Sent from my iPhone

> On May 16, 2017, at 7:58 AM, varun saluja <sa...@gmail.com> wrote:
> 
> Hi Nitan,
> 
> Thanks for response.
> 
> Yes, I could see mutation drops and increase count in system.hints. Is there any way , i can proceed to truncate hints like using nodetool truncatehints.
> 
> 
> Regards,
> Varun Saluja
> 
>> On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:
>> Do you see mutation drops?
>> Select count from system.hints; is it increasing?
>> 
>> Sent from my iPhone
>> 
>>> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>>> 
>>> Hi Experts,
>>> 
>>> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
>>> 
>>> 
>>> pending tasks: 1
>>>    compaction type   keyspace   table     completed          total                      unit   progress
>>>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
>>> Active compaction remaining time :   0h27m15s
>>> 
>>> 
>>> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
>>> 
>>> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
>>> Compaction on this table finished but hint table size is growing continuously.
>>> 
>>> Can someone Please help me.
>>> 
>>> 
>>> Thanks & Regards,
>>> Varun Saluja
>>> 
> 

Re: Long running compaction on huge hint table.

Posted by varun saluja <sa...@gmail.com>.
Hi Nitan,

Thanks for response.

Yes, I could see mutation drops and increase count in system.hints. Is
there any way , i can proceed to truncate hints like using nodetool
truncatehints.


Regards,
Varun Saluja

On 16 May 2017 at 17:52, Nitan Kainth <ni...@bamlabs.com> wrote:

> Do you see mutation drops?
> Select count from system.hints; is it increasing?
>
> Sent from my iPhone
>
> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
>
> Hi Experts,
>
> We are facing issue on production cluster. Compaction on system.hint table
> is running from last 2 days.
>
>
> pending tasks: 1
>    compaction type   keyspace   table     completed          total
>               unit   progress
>               Compaction     system   hints   20623021829   *877874092407*
>  bytes      2.35%
> Active compaction remaining time :   0h27m15s
>
>
> Active compaction remaining time shows in minutes.  But, this is job is
> running like indefinitely.
>
> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week
> on particular table.
> Compaction on this table finished but hint table size is growing
> continuously.
>
> Can someone Please help me.
>
>
> Thanks & Regards,
> Varun Saluja
>
>

Re: Long running compaction on huge hint table.

Posted by Nitan Kainth <ni...@bamlabs.com>.
Do you see mutation drops?
Select count from system.hints; is it increasing?

Sent from my iPhone

> On May 16, 2017, at 5:52 AM, varun saluja <sa...@gmail.com> wrote:
> 
> Hi Experts,
> 
> We are facing issue on production cluster. Compaction on system.hint table is running from last 2 days.
> 
> 
> pending tasks: 1
>    compaction type   keyspace   table     completed          total                      unit   progress
>               Compaction     system   hints   20623021829   877874092407   bytes      2.35%
> Active compaction remaining time :   0h27m15s
> 
> 
> Active compaction remaining time shows in minutes.  But, this is job is running like indefinitely.
> 
> We have 3 node cluster V 2.1.7. And we ran  write intensive job last week on particular table.
> Compaction on this table finished but hint table size is growing continuously.
> 
> Can someone Please help me.
> 
> 
> Thanks & Regards,
> Varun Saluja