You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Keerthiraja SJ <sj...@gmail.com> on 2015/02/07 10:08:15 UTC
How to Setup CS 4.5 Testing on VirtualBox
Hi
I followed the below doc to build CS 4.5 Test environment. But after the
successful creation I tired to create Zone in Advance Network during the
setup Network setup I could not see the Public traffic icon.
Is this a bug or do i need anything missing on the configuration. I need to
validate the testing 4.2.1 to 4.5 upgrade.
http://shapeblue.com/cloudstack/virtualbox-test-env/
Thanks,
Keerthi
Fwd: How to Setup CS 4.5 Testing on VirtualBox
Posted by Keerthiraja SJ <sj...@gmail.com>.
Hi All,
I followed the below doc to build CS 4.5 Test environment. But after the
successful creation I tired to create Zone in Advance Network during the
setup Network setup I could not see the Public traffic icon.
Is this a bug or do i need anything missing on the configuration. I need to
validate the testing 4.2.1 to 4.5 upgrade.
http://shapeblue.com/cloudstack/virtualbox-test-env/
Thanks,
Keerthi
Fwd: How to Setup CS 4.5 Testing on VirtualBox
Posted by Keerthiraja SJ <sj...@gmail.com>.
Hi All,
I am testing on CentOS 6.5. Now I am stuck while the primary storage adding
Something went wrong; please correct the following:
Failed to add data store: Can not create storage pool through host 1 due to
Catch Exception com.cloud.utils.exception.CloudRuntimeException, create
StoragePool failed due to com.cloud.utils.exception.CloudRuntimeException:
Unable to create NFS SR Pool[2|10.10.100.11:2049|/Primary] on
host:a4e0efec-d177-45ef-b5e4-d449aca2bdfa pool: 10.10.100.11/Primary
I could not able to ping 10.10.100.11 from xenserver.
I added the IPaddress vi xencenter.
server Interface Network NIC IPSetup IPAddress
Subnet Gateway
Xenserver01 Management MGMT NIC0 static 192.168.56.12
255.255.255.0 192.168.56.1
xenserver02 PRI-STOR PRI-STORAGE NIC3 static 10.10.100.11
255.255.255.0
xenserver02 SEC-STOR SEC-STORAGE NIC3 static 10.10.101.11
255.255.255.0
What really went wrong. I could not able to ping 10.10.100.1 & 101.1 from
xenserver.
Thanks,
Keerthi
On Sun, Feb 8, 2015 at 4:14 PM, Rohit Yadav <ro...@shapeblue.com>
wrote:
> Hi Keerthiraja,
>
> Avoid relying on testing repos http://packages.bhaisaab.org as they are
> temporary and may change from time to time without notification.
>
> I would suggest removing old CloudStack management server cache after
> every upgrade:
>
> - Stop management server one by one
> - For each stopped management server, on Debian for example - remove rm
> -fr /var/cache/cloudstack/management/work/*
> - Start management server again, this will remove old UI’s cache which may
> be affecting you
>
> If you’re using CentOS, let me know if this worked for you as the above
> has been tested only on Debian.
>
> > On 08-Feb-2015, at 4:05 pm, Keerthiraja SJ <sj...@gmail.com> wrote:
> >
> > I am using the repo with below link. I have choose Advance Network with
> > Security Group.
> >
> > http://packages.bhaisaab.org/cloudstack/testing/centos/4.5/
> >
> > This are my below csman configuration.
> >
> > eth0 Link encap:Ethernet HWaddr 08:00:27:8D:E8:E2
> > inet addr:192.168.56.11 Bcast:192.168.56.255
> Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fe8d:e8e2/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:2400 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:3274 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:523822 (511.5 KiB) TX bytes:3401559 (3.2 MiB)
> > Interrupt:19 Base address:0xd020
> >
> > eth1 Link encap:Ethernet HWaddr 08:00:27:97:87:7A
> > inet addr:10.0.2.11 Bcast:10.0.2.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fe97:877a/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:33 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:10791 (10.5 KiB) TX bytes:4245 (4.1 KiB)
> >
> > eth2 Link encap:Ethernet HWaddr 08:00:27:CB:13:18
> > inet addr:172.30.0.11 Bcast:172.30.0.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fecb:1318/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:186 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:63612 (62.1 KiB) TX bytes:746 (746.0 b)
> >
> > eth3 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:181 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:61902 (60.4 KiB) TX bytes:2140 (2.0 KiB)
> >
> > eth3.100 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet addr:10.10.100.11 Bcast:10.10.100.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:816 (816.0 b)
> >
> > eth3.101 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet addr:10.10.101.11 Bcast:10.10.101.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:746 (746.0 b)
> >
> > Is any thing wrong. I am really worried about my testing getting delayed
> > from migration 4.2 to 4.5
> >
> >
> > Thanks,
> > Keerthi
> >
> > On Sun, Feb 8, 2015 at 3:49 PM, Geoff Higginbottom <
> > geoff.higginbottom@shapeblue.com> wrote:
> >
> >> Keerthi,
> >>
> >> How are getting the 4.5.0 code, building from source or using a repo?
> >>
> >> I just tried it again using the ACS 4.5.0 RC2 Repo of
> >> http://packages.shapeblue.com/cloudstack/testing/centos/4.5/ and it
> >> correctly shows the Public Network Icon
> >> http://postimg.org/image/ov767u2yp/
> >>
> >> The only reason there would be no Public Network is if you accidentally
> >> chose the Basic Network OR Advanced With Security Groups, this is an
> extra
> >> check box at the bottom of the screen which you do NOT want to select
> >> http://postimg.org/image/vthycqh37/
> >>
> >>
> >> Regards
> >>
> >> Geoff Higginbottom
> >> CTO / Cloud Architect
> >>
> >>
> >>
> >>
> >>
> >> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
> >>
> >> geoff.higginbottom@shapeblue.com | www.shapeblue.com | Twitter:
> >> @cloudstackguru
> >>
> >> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS
> >>
> >> On 8 Feb 2015, at 05:15, Keerthiraja SJ <sj...@gmail.com> wrote:
> >>
> >> Hi
> >>
> >> I followed the below doc to build CS 4.5 Test environment. But after the
> >> successful creation I tired to create Zone in Advance Network during the
> >> setup Network setup I could not see the Public traffic icon.
> >>
> >> Is this a bug or do i need anything missing on the configuration. I
> need to
> >> validate the testing 4.2.1 to 4.5 upgrade.
> >>
> >>
> >> http://shapeblue.com/cloudstack/virtualbox-test-env/
> >>
> >> Thanks,
> >> Keerthi
> >>
> >>
> >> Find out more about ShapeBlue and our range of CloudStack related
> >> services
> >>
> >> IaaS Cloud Design & Build
> >> <http://shapeblue.com/iaas-cloud-design-and-build//>
> >> CSForge – rapid IaaS deployment framework <
> http://shapeblue.com/csforge/>
> >> CloudStack Consulting <http://shapeblue.com/cloudstack-consultancy/>
> >> CloudStack Software Engineering
> >> <http://shapeblue.com/cloudstack-software-engineering/>
> >> CloudStack Infrastructure Support
> >> <http://shapeblue.com/cloudstack-infrastructure-support/>
> >> CloudStack Bootcamp Training Courses
> >> <http://shapeblue.com/cloudstack-training/>
> >>
> >> This email and any attachments to it may be confidential and are
> intended
> >> solely for the use of the individual to whom it is addressed. Any views
> or
> >> opinions expressed are solely those of the author and do not necessarily
> >> represent those of Shape Blue Ltd or related companies. If you are not
> the
> >> intended recipient of this email, you must neither take any action based
> >> upon its contents, nor copy or show it to anyone. Please contact the
> sender
> >> if you believe you have received this email in error. Shape Blue Ltd is
> a
> >> company incorporated in England & Wales. ShapeBlue Services India LLP
> is a
> >> company incorporated in India and is operated under license from Shape
> Blue
> >> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in
> Brasil
> >> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd
> is
> >> a company registered by The Republic of South Africa and is traded under
> >> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
> Regards,
> Rohit Yadav
> Software Architect, ShapeBlue
> M. +91 88 262 30892 | rohit.yadav@shapeblue.com
> Blog: bhaisaab.org | Twitter: @_bhaisaab
>
>
>
> Find out more about ShapeBlue and our range of CloudStack related services
>
> IaaS Cloud Design & Build<
> http://shapeblue.com/iaas-cloud-design-and-build//>
> CSForge – rapid IaaS deployment framework<http://shapeblue.com/csforge/>
> CloudStack Consulting<http://shapeblue.com/cloudstack-consultancy/>
> CloudStack Software Engineering<
> http://shapeblue.com/cloudstack-software-engineering/>
> CloudStack Infrastructure Support<
> http://shapeblue.com/cloudstack-infrastructure-support/>
> CloudStack Bootcamp Training Courses<
> http://shapeblue.com/cloudstack-training/>
>
> This email and any attachments to it may be confidential and are intended
> solely for the use of the individual to whom it is addressed. Any views or
> opinions expressed are solely those of the author and do not necessarily
> represent those of Shape Blue Ltd or related companies. If you are not the
> intended recipient of this email, you must neither take any action based
> upon its contents, nor copy or show it to anyone. Please contact the sender
> if you believe you have received this email in error. Shape Blue Ltd is a
> company incorporated in England & Wales. ShapeBlue Services India LLP is a
> company incorporated in India and is operated under license from Shape Blue
> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil
> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd is
> a company registered by The Republic of South Africa and is traded under
> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
Fwd: How to Setup CS 4.5 Testing on VirtualBox
Posted by Keerthiraja SJ <sj...@gmail.com>.
Hi All,
I am testing on CentOS 6.5. Now I am stuck while the primary storage adding
Something went wrong; please correct the following:
Failed to add data store: Can not create storage pool through host 1 due to
Catch Exception com.cloud.utils.exception.CloudRuntimeException, create
StoragePool failed due to com.cloud.utils.exception.CloudRuntimeException:
Unable to create NFS SR Pool[2|10.10.100.11:2049|/Primary] on
host:a4e0efec-d177-45ef-b5e4-d449aca2bdfa pool: 10.10.100.11/Primary
I could not able to ping 10.10.100.11 from xenserver.
I added the IPaddress vi xencenter.
server Interface Network NIC IPSetup IPAddress
Subnet Gateway
Xenserver01 Management MGMT NIC0 static 192.168.56.12
255.255.255.0 192.168.56.1
xenserver02 PRI-STOR PRI-STORAGE NIC3 static 10.10.100.11
255.255.255.0
xenserver02 SEC-STOR SEC-STORAGE NIC3 static 10.10.101.11
255.255.255.0
What really went wrong. I could not able to ping 10.10.100.1 & 101.1 from
xenserver.
Thanks,
Keerthi
On Sun, Feb 8, 2015 at 4:14 PM, Rohit Yadav <ro...@shapeblue.com>
wrote:
> Hi Keerthiraja,
>
> Avoid relying on testing repos http://packages.bhaisaab.org as they are
> temporary and may change from time to time without notification.
>
> I would suggest removing old CloudStack management server cache after
> every upgrade:
>
> - Stop management server one by one
> - For each stopped management server, on Debian for example - remove rm
> -fr /var/cache/cloudstack/management/work/*
> - Start management server again, this will remove old UI’s cache which may
> be affecting you
>
> If you’re using CentOS, let me know if this worked for you as the above
> has been tested only on Debian.
>
> > On 08-Feb-2015, at 4:05 pm, Keerthiraja SJ <sj...@gmail.com> wrote:
> >
> > I am using the repo with below link. I have choose Advance Network with
> > Security Group.
> >
> > http://packages.bhaisaab.org/cloudstack/testing/centos/4.5/
> >
> > This are my below csman configuration.
> >
> > eth0 Link encap:Ethernet HWaddr 08:00:27:8D:E8:E2
> > inet addr:192.168.56.11 Bcast:192.168.56.255
> Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fe8d:e8e2/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:2400 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:3274 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:523822 (511.5 KiB) TX bytes:3401559 (3.2 MiB)
> > Interrupt:19 Base address:0xd020
> >
> > eth1 Link encap:Ethernet HWaddr 08:00:27:97:87:7A
> > inet addr:10.0.2.11 Bcast:10.0.2.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fe97:877a/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:33 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:10791 (10.5 KiB) TX bytes:4245 (4.1 KiB)
> >
> > eth2 Link encap:Ethernet HWaddr 08:00:27:CB:13:18
> > inet addr:172.30.0.11 Bcast:172.30.0.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fecb:1318/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:186 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:63612 (62.1 KiB) TX bytes:746 (746.0 b)
> >
> > eth3 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:181 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:61902 (60.4 KiB) TX bytes:2140 (2.0 KiB)
> >
> > eth3.100 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet addr:10.10.100.11 Bcast:10.10.100.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:816 (816.0 b)
> >
> > eth3.101 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet addr:10.10.101.11 Bcast:10.10.101.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:746 (746.0 b)
> >
> > Is any thing wrong. I am really worried about my testing getting delayed
> > from migration 4.2 to 4.5
> >
> >
> > Thanks,
> > Keerthi
> >
> > On Sun, Feb 8, 2015 at 3:49 PM, Geoff Higginbottom <
> > geoff.higginbottom@shapeblue.com> wrote:
> >
> >> Keerthi,
> >>
> >> How are getting the 4.5.0 code, building from source or using a repo?
> >>
> >> I just tried it again using the ACS 4.5.0 RC2 Repo of
> >> http://packages.shapeblue.com/cloudstack/testing/centos/4.5/ and it
> >> correctly shows the Public Network Icon
> >> http://postimg.org/image/ov767u2yp/
> >>
> >> The only reason there would be no Public Network is if you accidentally
> >> chose the Basic Network OR Advanced With Security Groups, this is an
> extra
> >> check box at the bottom of the screen which you do NOT want to select
> >> http://postimg.org/image/vthycqh37/
> >>
> >>
> >> Regards
> >>
> >> Geoff Higginbottom
> >> CTO / Cloud Architect
> >>
> >>
> >>
> >>
> >>
> >> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
> >>
> >> geoff.higginbottom@shapeblue.com | www.shapeblue.com | Twitter:
> >> @cloudstackguru
> >>
> >> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS
> >>
> >> On 8 Feb 2015, at 05:15, Keerthiraja SJ <sj...@gmail.com> wrote:
> >>
> >> Hi
> >>
> >> I followed the below doc to build CS 4.5 Test environment. But after the
> >> successful creation I tired to create Zone in Advance Network during the
> >> setup Network setup I could not see the Public traffic icon.
> >>
> >> Is this a bug or do i need anything missing on the configuration. I
> need to
> >> validate the testing 4.2.1 to 4.5 upgrade.
> >>
> >>
> >> http://shapeblue.com/cloudstack/virtualbox-test-env/
> >>
> >> Thanks,
> >> Keerthi
> >>
> >>
> >> Find out more about ShapeBlue and our range of CloudStack related
> >> services
> >>
> >> IaaS Cloud Design & Build
> >> <http://shapeblue.com/iaas-cloud-design-and-build//>
> >> CSForge – rapid IaaS deployment framework <
> http://shapeblue.com/csforge/>
> >> CloudStack Consulting <http://shapeblue.com/cloudstack-consultancy/>
> >> CloudStack Software Engineering
> >> <http://shapeblue.com/cloudstack-software-engineering/>
> >> CloudStack Infrastructure Support
> >> <http://shapeblue.com/cloudstack-infrastructure-support/>
> >> CloudStack Bootcamp Training Courses
> >> <http://shapeblue.com/cloudstack-training/>
> >>
> >> This email and any attachments to it may be confidential and are
> intended
> >> solely for the use of the individual to whom it is addressed. Any views
> or
> >> opinions expressed are solely those of the author and do not necessarily
> >> represent those of Shape Blue Ltd or related companies. If you are not
> the
> >> intended recipient of this email, you must neither take any action based
> >> upon its contents, nor copy or show it to anyone. Please contact the
> sender
> >> if you believe you have received this email in error. Shape Blue Ltd is
> a
> >> company incorporated in England & Wales. ShapeBlue Services India LLP
> is a
> >> company incorporated in India and is operated under license from Shape
> Blue
> >> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in
> Brasil
> >> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd
> is
> >> a company registered by The Republic of South Africa and is traded under
> >> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
> Regards,
> Rohit Yadav
> Software Architect, ShapeBlue
> M. +91 88 262 30892 | rohit.yadav@shapeblue.com
> Blog: bhaisaab.org | Twitter: @_bhaisaab
>
>
>
> Find out more about ShapeBlue and our range of CloudStack related services
>
> IaaS Cloud Design & Build<
> http://shapeblue.com/iaas-cloud-design-and-build//>
> CSForge – rapid IaaS deployment framework<http://shapeblue.com/csforge/>
> CloudStack Consulting<http://shapeblue.com/cloudstack-consultancy/>
> CloudStack Software Engineering<
> http://shapeblue.com/cloudstack-software-engineering/>
> CloudStack Infrastructure Support<
> http://shapeblue.com/cloudstack-infrastructure-support/>
> CloudStack Bootcamp Training Courses<
> http://shapeblue.com/cloudstack-training/>
>
> This email and any attachments to it may be confidential and are intended
> solely for the use of the individual to whom it is addressed. Any views or
> opinions expressed are solely those of the author and do not necessarily
> represent those of Shape Blue Ltd or related companies. If you are not the
> intended recipient of this email, you must neither take any action based
> upon its contents, nor copy or show it to anyone. Please contact the sender
> if you believe you have received this email in error. Shape Blue Ltd is a
> company incorporated in England & Wales. ShapeBlue Services India LLP is a
> company incorporated in India and is operated under license from Shape Blue
> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil
> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd is
> a company registered by The Republic of South Africa and is traded under
> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
Re: How to Setup CS 4.5 Testing on VirtualBox
Posted by Keerthiraja SJ <sj...@gmail.com>.
I am testing on CentOS 6.5. Now I am stuck while the primary storage adding
Something went wrong; please correct the following:
Failed to add data store: Can not create storage pool through host 1 due to
Catch Exception com.cloud.utils.exception.CloudRuntimeException, create
StoragePool failed due to com.cloud.utils.exception.CloudRuntimeException:
Unable to create NFS SR Pool[2|10.10.100.11:2049|/Primary] on
host:a4e0efec-d177-45ef-b5e4-d449aca2bdfa pool: 10.10.100.11/Primary
I could not able to ping 10.10.100.11 from xenserver.
I added the IPaddress vi xencenter.
server Interface Network NIC IPSetup IPAddress
Subnet Gateway
Xenserver01 Management MGMT NIC0 static 192.168.56.12
255.255.255.0 192.168.56.1
xenserver02 PRI-STOR PRI-STORAGE NIC3 static 10.10.100.11
255.255.255.0
xenserver02 SEC-STOR SEC-STORAGE NIC3 static 10.10.101.11
255.255.255.0
What really went wrong. I could not able to ping 10.10.100.1 & 101.1 from
xenserver.
Thanks,
Keerthi
On Sun, Feb 8, 2015 at 4:14 PM, Rohit Yadav <ro...@shapeblue.com>
wrote:
> Hi Keerthiraja,
>
> Avoid relying on testing repos http://packages.bhaisaab.org as they are
> temporary and may change from time to time without notification.
>
> I would suggest removing old CloudStack management server cache after
> every upgrade:
>
> - Stop management server one by one
> - For each stopped management server, on Debian for example - remove rm
> -fr /var/cache/cloudstack/management/work/*
> - Start management server again, this will remove old UI’s cache which may
> be affecting you
>
> If you’re using CentOS, let me know if this worked for you as the above
> has been tested only on Debian.
>
> > On 08-Feb-2015, at 4:05 pm, Keerthiraja SJ <sj...@gmail.com> wrote:
> >
> > I am using the repo with below link. I have choose Advance Network with
> > Security Group.
> >
> > http://packages.bhaisaab.org/cloudstack/testing/centos/4.5/
> >
> > This are my below csman configuration.
> >
> > eth0 Link encap:Ethernet HWaddr 08:00:27:8D:E8:E2
> > inet addr:192.168.56.11 Bcast:192.168.56.255
> Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fe8d:e8e2/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:2400 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:3274 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:523822 (511.5 KiB) TX bytes:3401559 (3.2 MiB)
> > Interrupt:19 Base address:0xd020
> >
> > eth1 Link encap:Ethernet HWaddr 08:00:27:97:87:7A
> > inet addr:10.0.2.11 Bcast:10.0.2.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fe97:877a/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:33 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:10791 (10.5 KiB) TX bytes:4245 (4.1 KiB)
> >
> > eth2 Link encap:Ethernet HWaddr 08:00:27:CB:13:18
> > inet addr:172.30.0.11 Bcast:172.30.0.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fecb:1318/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:186 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:63612 (62.1 KiB) TX bytes:746 (746.0 b)
> >
> > eth3 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:181 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:61902 (60.4 KiB) TX bytes:2140 (2.0 KiB)
> >
> > eth3.100 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet addr:10.10.100.11 Bcast:10.10.100.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:816 (816.0 b)
> >
> > eth3.101 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> > inet addr:10.10.101.11 Bcast:10.10.101.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:746 (746.0 b)
> >
> > Is any thing wrong. I am really worried about my testing getting delayed
> > from migration 4.2 to 4.5
> >
> >
> > Thanks,
> > Keerthi
> >
> > On Sun, Feb 8, 2015 at 3:49 PM, Geoff Higginbottom <
> > geoff.higginbottom@shapeblue.com> wrote:
> >
> >> Keerthi,
> >>
> >> How are getting the 4.5.0 code, building from source or using a repo?
> >>
> >> I just tried it again using the ACS 4.5.0 RC2 Repo of
> >> http://packages.shapeblue.com/cloudstack/testing/centos/4.5/ and it
> >> correctly shows the Public Network Icon
> >> http://postimg.org/image/ov767u2yp/
> >>
> >> The only reason there would be no Public Network is if you accidentally
> >> chose the Basic Network OR Advanced With Security Groups, this is an
> extra
> >> check box at the bottom of the screen which you do NOT want to select
> >> http://postimg.org/image/vthycqh37/
> >>
> >>
> >> Regards
> >>
> >> Geoff Higginbottom
> >> CTO / Cloud Architect
> >>
> >>
> >>
> >>
> >>
> >> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
> >>
> >> geoff.higginbottom@shapeblue.com | www.shapeblue.com | Twitter:
> >> @cloudstackguru
> >>
> >> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS
> >>
> >> On 8 Feb 2015, at 05:15, Keerthiraja SJ <sj...@gmail.com> wrote:
> >>
> >> Hi
> >>
> >> I followed the below doc to build CS 4.5 Test environment. But after the
> >> successful creation I tired to create Zone in Advance Network during the
> >> setup Network setup I could not see the Public traffic icon.
> >>
> >> Is this a bug or do i need anything missing on the configuration. I
> need to
> >> validate the testing 4.2.1 to 4.5 upgrade.
> >>
> >>
> >> http://shapeblue.com/cloudstack/virtualbox-test-env/
> >>
> >> Thanks,
> >> Keerthi
> >>
> >>
> >> Find out more about ShapeBlue and our range of CloudStack related
> >> services
> >>
> >> IaaS Cloud Design & Build
> >> <http://shapeblue.com/iaas-cloud-design-and-build//>
> >> CSForge – rapid IaaS deployment framework <
> http://shapeblue.com/csforge/>
> >> CloudStack Consulting <http://shapeblue.com/cloudstack-consultancy/>
> >> CloudStack Software Engineering
> >> <http://shapeblue.com/cloudstack-software-engineering/>
> >> CloudStack Infrastructure Support
> >> <http://shapeblue.com/cloudstack-infrastructure-support/>
> >> CloudStack Bootcamp Training Courses
> >> <http://shapeblue.com/cloudstack-training/>
> >>
> >> This email and any attachments to it may be confidential and are
> intended
> >> solely for the use of the individual to whom it is addressed. Any views
> or
> >> opinions expressed are solely those of the author and do not necessarily
> >> represent those of Shape Blue Ltd or related companies. If you are not
> the
> >> intended recipient of this email, you must neither take any action based
> >> upon its contents, nor copy or show it to anyone. Please contact the
> sender
> >> if you believe you have received this email in error. Shape Blue Ltd is
> a
> >> company incorporated in England & Wales. ShapeBlue Services India LLP
> is a
> >> company incorporated in India and is operated under license from Shape
> Blue
> >> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in
> Brasil
> >> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd
> is
> >> a company registered by The Republic of South Africa and is traded under
> >> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
> Regards,
> Rohit Yadav
> Software Architect, ShapeBlue
> M. +91 88 262 30892 | rohit.yadav@shapeblue.com
> Blog: bhaisaab.org | Twitter: @_bhaisaab
>
>
>
> Find out more about ShapeBlue and our range of CloudStack related services
>
> IaaS Cloud Design & Build<
> http://shapeblue.com/iaas-cloud-design-and-build//>
> CSForge – rapid IaaS deployment framework<http://shapeblue.com/csforge/>
> CloudStack Consulting<http://shapeblue.com/cloudstack-consultancy/>
> CloudStack Software Engineering<
> http://shapeblue.com/cloudstack-software-engineering/>
> CloudStack Infrastructure Support<
> http://shapeblue.com/cloudstack-infrastructure-support/>
> CloudStack Bootcamp Training Courses<
> http://shapeblue.com/cloudstack-training/>
>
> This email and any attachments to it may be confidential and are intended
> solely for the use of the individual to whom it is addressed. Any views or
> opinions expressed are solely those of the author and do not necessarily
> represent those of Shape Blue Ltd or related companies. If you are not the
> intended recipient of this email, you must neither take any action based
> upon its contents, nor copy or show it to anyone. Please contact the sender
> if you believe you have received this email in error. Shape Blue Ltd is a
> company incorporated in England & Wales. ShapeBlue Services India LLP is a
> company incorporated in India and is operated under license from Shape Blue
> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil
> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd is
> a company registered by The Republic of South Africa and is traded under
> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
Re: How to Setup CS 4.5 Testing on VirtualBox
Posted by Rohit Yadav <ro...@shapeblue.com>.
Hi Keerthiraja,
Avoid relying on testing repos http://packages.bhaisaab.org as they are temporary and may change from time to time without notification.
I would suggest removing old CloudStack management server cache after every upgrade:
- Stop management server one by one
- For each stopped management server, on Debian for example - remove rm -fr /var/cache/cloudstack/management/work/*
- Start management server again, this will remove old UI’s cache which may be affecting you
If you’re using CentOS, let me know if this worked for you as the above has been tested only on Debian.
> On 08-Feb-2015, at 4:05 pm, Keerthiraja SJ <sj...@gmail.com> wrote:
>
> I am using the repo with below link. I have choose Advance Network with
> Security Group.
>
> http://packages.bhaisaab.org/cloudstack/testing/centos/4.5/
>
> This are my below csman configuration.
>
> eth0 Link encap:Ethernet HWaddr 08:00:27:8D:E8:E2
> inet addr:192.168.56.11 Bcast:192.168.56.255 Mask:255.255.255.0
> inet6 addr: fe80::a00:27ff:fe8d:e8e2/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:2400 errors:0 dropped:0 overruns:0 frame:0
> TX packets:3274 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:523822 (511.5 KiB) TX bytes:3401559 (3.2 MiB)
> Interrupt:19 Base address:0xd020
>
> eth1 Link encap:Ethernet HWaddr 08:00:27:97:87:7A
> inet addr:10.0.2.11 Bcast:10.0.2.255 Mask:255.255.255.0
> inet6 addr: fe80::a00:27ff:fe97:877a/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:33 errors:0 dropped:0 overruns:0 frame:0
> TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:10791 (10.5 KiB) TX bytes:4245 (4.1 KiB)
>
> eth2 Link encap:Ethernet HWaddr 08:00:27:CB:13:18
> inet addr:172.30.0.11 Bcast:172.30.0.255 Mask:255.255.255.0
> inet6 addr: fe80::a00:27ff:fecb:1318/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:186 errors:0 dropped:0 overruns:0 frame:0
> TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:63612 (62.1 KiB) TX bytes:746 (746.0 b)
>
> eth3 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> RX packets:181 errors:0 dropped:0 overruns:0 frame:0
> TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:61902 (60.4 KiB) TX bytes:2140 (2.0 KiB)
>
> eth3.100 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> inet addr:10.10.100.11 Bcast:10.10.100.255 Mask:255.255.255.0
> inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:816 (816.0 b)
>
> eth3.101 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
> inet addr:10.10.101.11 Bcast:10.10.101.255 Mask:255.255.255.0
> inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:746 (746.0 b)
>
> Is any thing wrong. I am really worried about my testing getting delayed
> from migration 4.2 to 4.5
>
>
> Thanks,
> Keerthi
>
> On Sun, Feb 8, 2015 at 3:49 PM, Geoff Higginbottom <
> geoff.higginbottom@shapeblue.com> wrote:
>
>> Keerthi,
>>
>> How are getting the 4.5.0 code, building from source or using a repo?
>>
>> I just tried it again using the ACS 4.5.0 RC2 Repo of
>> http://packages.shapeblue.com/cloudstack/testing/centos/4.5/ and it
>> correctly shows the Public Network Icon
>> http://postimg.org/image/ov767u2yp/
>>
>> The only reason there would be no Public Network is if you accidentally
>> chose the Basic Network OR Advanced With Security Groups, this is an extra
>> check box at the bottom of the screen which you do NOT want to select
>> http://postimg.org/image/vthycqh37/
>>
>>
>> Regards
>>
>> Geoff Higginbottom
>> CTO / Cloud Architect
>>
>>
>>
>>
>>
>> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
>>
>> geoff.higginbottom@shapeblue.com | www.shapeblue.com | Twitter:
>> @cloudstackguru
>>
>> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS
>>
>> On 8 Feb 2015, at 05:15, Keerthiraja SJ <sj...@gmail.com> wrote:
>>
>> Hi
>>
>> I followed the below doc to build CS 4.5 Test environment. But after the
>> successful creation I tired to create Zone in Advance Network during the
>> setup Network setup I could not see the Public traffic icon.
>>
>> Is this a bug or do i need anything missing on the configuration. I need to
>> validate the testing 4.2.1 to 4.5 upgrade.
>>
>>
>> http://shapeblue.com/cloudstack/virtualbox-test-env/
>>
>> Thanks,
>> Keerthi
>>
>>
>> Find out more about ShapeBlue and our range of CloudStack related
>> services
>>
>> IaaS Cloud Design & Build
>> <http://shapeblue.com/iaas-cloud-design-and-build//>
>> CSForge – rapid IaaS deployment framework <http://shapeblue.com/csforge/>
>> CloudStack Consulting <http://shapeblue.com/cloudstack-consultancy/>
>> CloudStack Software Engineering
>> <http://shapeblue.com/cloudstack-software-engineering/>
>> CloudStack Infrastructure Support
>> <http://shapeblue.com/cloudstack-infrastructure-support/>
>> CloudStack Bootcamp Training Courses
>> <http://shapeblue.com/cloudstack-training/>
>>
>> This email and any attachments to it may be confidential and are intended
>> solely for the use of the individual to whom it is addressed. Any views or
>> opinions expressed are solely those of the author and do not necessarily
>> represent those of Shape Blue Ltd or related companies. If you are not the
>> intended recipient of this email, you must neither take any action based
>> upon its contents, nor copy or show it to anyone. Please contact the sender
>> if you believe you have received this email in error. Shape Blue Ltd is a
>> company incorporated in England & Wales. ShapeBlue Services India LLP is a
>> company incorporated in India and is operated under license from Shape Blue
>> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil
>> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd is
>> a company registered by The Republic of South Africa and is traded under
>> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Regards,
Rohit Yadav
Software Architect, ShapeBlue
M. +91 88 262 30892 | rohit.yadav@shapeblue.com
Blog: bhaisaab.org | Twitter: @_bhaisaab
Find out more about ShapeBlue and our range of CloudStack related services
IaaS Cloud Design & Build<http://shapeblue.com/iaas-cloud-design-and-build//>
CSForge – rapid IaaS deployment framework<http://shapeblue.com/csforge/>
CloudStack Consulting<http://shapeblue.com/cloudstack-consultancy/>
CloudStack Software Engineering<http://shapeblue.com/cloudstack-software-engineering/>
CloudStack Infrastructure Support<http://shapeblue.com/cloudstack-infrastructure-support/>
CloudStack Bootcamp Training Courses<http://shapeblue.com/cloudstack-training/>
This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England & Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd is a company registered by The Republic of South Africa and is traded under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: How to Setup CS 4.5 Testing on VirtualBox
Posted by Keerthiraja SJ <sj...@gmail.com>.
I am using the repo with below link. I have choose Advance Network with
Security Group.
http://packages.bhaisaab.org/cloudstack/testing/centos/4.5/
This are my below csman configuration.
eth0 Link encap:Ethernet HWaddr 08:00:27:8D:E8:E2
inet addr:192.168.56.11 Bcast:192.168.56.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe8d:e8e2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2400 errors:0 dropped:0 overruns:0 frame:0
TX packets:3274 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:523822 (511.5 KiB) TX bytes:3401559 (3.2 MiB)
Interrupt:19 Base address:0xd020
eth1 Link encap:Ethernet HWaddr 08:00:27:97:87:7A
inet addr:10.0.2.11 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe97:877a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:33 errors:0 dropped:0 overruns:0 frame:0
TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10791 (10.5 KiB) TX bytes:4245 (4.1 KiB)
eth2 Link encap:Ethernet HWaddr 08:00:27:CB:13:18
inet addr:172.30.0.11 Bcast:172.30.0.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fecb:1318/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:186 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:63612 (62.1 KiB) TX bytes:746 (746.0 b)
eth3 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
RX packets:181 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:61902 (60.4 KiB) TX bytes:2140 (2.0 KiB)
eth3.100 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
inet addr:10.10.100.11 Bcast:10.10.100.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:816 (816.0 b)
eth3.101 Link encap:Ethernet HWaddr 08:00:27:C3:5F:72
inet addr:10.10.101.11 Bcast:10.10.101.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec3:5f72/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:746 (746.0 b)
Is any thing wrong. I am really worried about my testing getting delayed
from migration 4.2 to 4.5
Thanks,
Keerthi
On Sun, Feb 8, 2015 at 3:49 PM, Geoff Higginbottom <
geoff.higginbottom@shapeblue.com> wrote:
> Keerthi,
>
> How are getting the 4.5.0 code, building from source or using a repo?
>
> I just tried it again using the ACS 4.5.0 RC2 Repo of
> http://packages.shapeblue.com/cloudstack/testing/centos/4.5/ and it
> correctly shows the Public Network Icon
> http://postimg.org/image/ov767u2yp/
>
> The only reason there would be no Public Network is if you accidentally
> chose the Basic Network OR Advanced With Security Groups, this is an extra
> check box at the bottom of the screen which you do NOT want to select
> http://postimg.org/image/vthycqh37/
>
>
> Regards
>
> Geoff Higginbottom
> CTO / Cloud Architect
>
>
>
>
>
> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
>
> geoff.higginbottom@shapeblue.com | www.shapeblue.com | Twitter:
> @cloudstackguru
>
> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS
>
> On 8 Feb 2015, at 05:15, Keerthiraja SJ <sj...@gmail.com> wrote:
>
> Hi
>
> I followed the below doc to build CS 4.5 Test environment. But after the
> successful creation I tired to create Zone in Advance Network during the
> setup Network setup I could not see the Public traffic icon.
>
> Is this a bug or do i need anything missing on the configuration. I need to
> validate the testing 4.2.1 to 4.5 upgrade.
>
>
> http://shapeblue.com/cloudstack/virtualbox-test-env/
>
> Thanks,
> Keerthi
>
>
> Find out more about ShapeBlue and our range of CloudStack related
> services
>
> IaaS Cloud Design & Build
> <http://shapeblue.com/iaas-cloud-design-and-build//>
> CSForge – rapid IaaS deployment framework <http://shapeblue.com/csforge/>
> CloudStack Consulting <http://shapeblue.com/cloudstack-consultancy/>
> CloudStack Software Engineering
> <http://shapeblue.com/cloudstack-software-engineering/>
> CloudStack Infrastructure Support
> <http://shapeblue.com/cloudstack-infrastructure-support/>
> CloudStack Bootcamp Training Courses
> <http://shapeblue.com/cloudstack-training/>
>
> This email and any attachments to it may be confidential and are intended
> solely for the use of the individual to whom it is addressed. Any views or
> opinions expressed are solely those of the author and do not necessarily
> represent those of Shape Blue Ltd or related companies. If you are not the
> intended recipient of this email, you must neither take any action based
> upon its contents, nor copy or show it to anyone. Please contact the sender
> if you believe you have received this email in error. Shape Blue Ltd is a
> company incorporated in England & Wales. ShapeBlue Services India LLP is a
> company incorporated in India and is operated under license from Shape Blue
> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil
> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd is
> a company registered by The Republic of South Africa and is traded under
> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
Re: How to Setup CS 4.5 Testing on VirtualBox
Posted by Geoff Higginbottom <ge...@shapeblue.com>.
Keerthi,
How are getting the 4.5.0 code, building from source or using a repo?
I just tried it again using the ACS 4.5.0 RC2 Repo of http://packages.shapeblue.com/cloudstack/testing/centos/4.5/ and it correctly shows the Public Network Icon http://postimg.org/image/ov767u2yp/
The only reason there would be no Public Network is if you accidentally chose the Basic Network OR Advanced With Security Groups, this is an extra check box at the bottom of the screen which you do NOT want to select http://postimg.org/image/vthycqh37/
Regards
Geoff Higginbottom
CTO / Cloud Architect
[cid:image001.png@01D03019.40ED8D10]
D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
geoff.higginbottom@shapeblue.com | www.shapeblue.com<http://www.shapeblue.com> | Twitter:@cloudstackguru
ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS
On 8 Feb 2015, at 05:15, Keerthiraja SJ <sj...@gmail.com>> wrote:
Hi
I followed the below doc to build CS 4.5 Test environment. But after the
successful creation I tired to create Zone in Advance Network during the
setup Network setup I could not see the Public traffic icon.
Is this a bug or do i need anything missing on the configuration. I need to
validate the testing 4.2.1 to 4.5 upgrade.
http://shapeblue.com/cloudstack/virtualbox-test-env/
Thanks,
Keerthi
Find out more about ShapeBlue and our range of CloudStack related services
IaaS Cloud Design & Build<http://shapeblue.com/iaas-cloud-design-and-build//>
CSForge - rapid IaaS deployment framework<http://shapeblue.com/csforge/>
CloudStack Consulting<http://shapeblue.com/cloudstack-consultancy/>
CloudStack Software Engineering<http://shapeblue.com/cloudstack-software-engineering/>
CloudStack Infrastructure Support<http://shapeblue.com/cloudstack-infrastructure-support/>
CloudStack Bootcamp Training Courses<http://shapeblue.com/cloudstack-training/>
This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England & Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd is a company registered by The Republic of South Africa and is traded under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Fwd: How to Setup CS 4.5 Testing on VirtualBox
Posted by Keerthiraja SJ <sj...@gmail.com>.
Hi
I followed the below doc to build CS 4.5 Test environment. But after the
successful creation I tired to create Zone in Advance Network during the
setup Network setup I could not see the Public traffic icon.
Is this a bug or do i need anything missing on the configuration. I need to
validate the testing 4.2.1 to 4.5 upgrade.
http://shapeblue.com/cloudstack/virtualbox-test-env/
Thanks,
Keerthi