You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@hawq.apache.org by Ruilong Huo <rh...@pivotal.io> on 2017/01/18 12:44:37 UTC
Build and install pxf
Hi All,
To make sure icg is ok after hawq is built and installed, we need to
install hive and pxf.
Anyone can share with us the instructions for that, especially on osx? It
is better that it can be added to build and install section as well:
https://cwiki.apache.org/confluence/display/HAWQ/Build+and+Install
Best regards,
Ruilong Huo
Re: Build and install pxf
Posted by Shivram Mani <sh...@gmail.com>.
Folks, give us another day to publish the instructions. We are having to
automate the manual steps as part of the makefile since the manual steps
are too many to setup PXF along with tomcat on dev environments.
On Fri, Jan 20, 2017 at 3:39 PM, Shivram Mani <sh...@gmail.com>
wrote:
> I'm certifying the instructions, will send them out within a day.
>
> On Thu, Jan 19, 2017 at 6:54 PM, Ruilong Huo <rh...@pivotal.io> wrote:
>
>> Hi Shivram,
>>
>> Is there estimation regarding how long it takes to have that install
>> guide?
>> Currently, the vote for hawq 2.1 rc2 is pending on this.
>>
>> Best regards,
>> Ruilong Huo
>>
>> On Thu, Jan 19, 2017 at 3:44 PM, Ruilong Huo <rh...@pivotal.io> wrote:
>>
>> > Thanks Shivram and Roman. It is good to make pxf standalone.
>> >
>> > I think we can have pxf install instruction in hawq wiki for now and
>> move
>> > it to dedicate page once pxf is separated. Any better idea?
>> >
>> > Best regards,
>> > Ruilong Huo
>> >
>> > On Thu, Jan 19, 2017 at 9:48 AM, Roman Shaposhnik <roman@shaposhnik.org
>> >
>> > wrote:
>> >
>> >> Ruilong, I've started an effort into making PXF into more of a
>> standalone
>> >> component. You can see it tracked over here:
>> >> https://issues.apache.org/jira/browse/HAWQ-1233
>> >>
>> >> Keep an eye on that. We're also thinking of creating a standalone
>> >> PXF client (along the lines of hadoop fs ...) to ease the adoption of
>> >> the APIs.
>> >>
>> >> Thanks,
>> >> Roman.
>> >>
>> >> On Wed, Jan 18, 2017 at 5:00 PM, Shivram Mani <sh...@gmail.com>
>> >> wrote:
>> >> > Ruilong, currently the only related information on building PXF can
>> be
>> >> > found here https://cwiki.apache.org/confluence/display/HAWQ/PXF but
>> >> this
>> >> > doesn't seem to capture all the necessary components. Will work on
>> >> > providing detailed instructions in lines with the HAWQ Build/Install
>> doc
>> >> > for PXF as well.
>> >> >
>> >> > Regards
>> >> > Shivram
>> >> >
>> >> > On Wed, Jan 18, 2017 at 4:44 AM, Ruilong Huo <rh...@pivotal.io>
>> wrote:
>> >> >
>> >> >> Hi All,
>> >> >>
>> >> >> To make sure icg is ok after hawq is built and installed, we need to
>> >> >> install hive and pxf.
>> >> >> Anyone can share with us the instructions for that, especially on
>> osx?
>> >> It
>> >> >> is better that it can be added to build and install section as well:
>> >> >> https://cwiki.apache.org/confluence/display/HAWQ/Build+and+Install
>> >> >>
>> >> >>
>> >> >> Best regards,
>> >> >> Ruilong Huo
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > shivram mani
>> >>
>> >
>> >
>>
>
>
>
> --
> shivram mani
>
--
shivram mani
Re: Build and install pxf
Posted by Shivram Mani <sh...@gmail.com>.
I'm certifying the instructions, will send them out within a day.
On Thu, Jan 19, 2017 at 6:54 PM, Ruilong Huo <rh...@pivotal.io> wrote:
> Hi Shivram,
>
> Is there estimation regarding how long it takes to have that install guide?
> Currently, the vote for hawq 2.1 rc2 is pending on this.
>
> Best regards,
> Ruilong Huo
>
> On Thu, Jan 19, 2017 at 3:44 PM, Ruilong Huo <rh...@pivotal.io> wrote:
>
> > Thanks Shivram and Roman. It is good to make pxf standalone.
> >
> > I think we can have pxf install instruction in hawq wiki for now and move
> > it to dedicate page once pxf is separated. Any better idea?
> >
> > Best regards,
> > Ruilong Huo
> >
> > On Thu, Jan 19, 2017 at 9:48 AM, Roman Shaposhnik <ro...@shaposhnik.org>
> > wrote:
> >
> >> Ruilong, I've started an effort into making PXF into more of a
> standalone
> >> component. You can see it tracked over here:
> >> https://issues.apache.org/jira/browse/HAWQ-1233
> >>
> >> Keep an eye on that. We're also thinking of creating a standalone
> >> PXF client (along the lines of hadoop fs ...) to ease the adoption of
> >> the APIs.
> >>
> >> Thanks,
> >> Roman.
> >>
> >> On Wed, Jan 18, 2017 at 5:00 PM, Shivram Mani <sh...@gmail.com>
> >> wrote:
> >> > Ruilong, currently the only related information on building PXF can be
> >> > found here https://cwiki.apache.org/confluence/display/HAWQ/PXF but
> >> this
> >> > doesn't seem to capture all the necessary components. Will work on
> >> > providing detailed instructions in lines with the HAWQ Build/Install
> doc
> >> > for PXF as well.
> >> >
> >> > Regards
> >> > Shivram
> >> >
> >> > On Wed, Jan 18, 2017 at 4:44 AM, Ruilong Huo <rh...@pivotal.io> wrote:
> >> >
> >> >> Hi All,
> >> >>
> >> >> To make sure icg is ok after hawq is built and installed, we need to
> >> >> install hive and pxf.
> >> >> Anyone can share with us the instructions for that, especially on
> osx?
> >> It
> >> >> is better that it can be added to build and install section as well:
> >> >> https://cwiki.apache.org/confluence/display/HAWQ/Build+and+Install
> >> >>
> >> >>
> >> >> Best regards,
> >> >> Ruilong Huo
> >> >>
> >> >
> >> >
> >> >
> >> > --
> >> > shivram mani
> >>
> >
> >
>
--
shivram mani
Re: Build and install pxf
Posted by Ruilong Huo <rh...@pivotal.io>.
Hi Shivram,
Is there estimation regarding how long it takes to have that install guide?
Currently, the vote for hawq 2.1 rc2 is pending on this.
Best regards,
Ruilong Huo
On Thu, Jan 19, 2017 at 3:44 PM, Ruilong Huo <rh...@pivotal.io> wrote:
> Thanks Shivram and Roman. It is good to make pxf standalone.
>
> I think we can have pxf install instruction in hawq wiki for now and move
> it to dedicate page once pxf is separated. Any better idea?
>
> Best regards,
> Ruilong Huo
>
> On Thu, Jan 19, 2017 at 9:48 AM, Roman Shaposhnik <ro...@shaposhnik.org>
> wrote:
>
>> Ruilong, I've started an effort into making PXF into more of a standalone
>> component. You can see it tracked over here:
>> https://issues.apache.org/jira/browse/HAWQ-1233
>>
>> Keep an eye on that. We're also thinking of creating a standalone
>> PXF client (along the lines of hadoop fs ...) to ease the adoption of
>> the APIs.
>>
>> Thanks,
>> Roman.
>>
>> On Wed, Jan 18, 2017 at 5:00 PM, Shivram Mani <sh...@gmail.com>
>> wrote:
>> > Ruilong, currently the only related information on building PXF can be
>> > found here https://cwiki.apache.org/confluence/display/HAWQ/PXF but
>> this
>> > doesn't seem to capture all the necessary components. Will work on
>> > providing detailed instructions in lines with the HAWQ Build/Install doc
>> > for PXF as well.
>> >
>> > Regards
>> > Shivram
>> >
>> > On Wed, Jan 18, 2017 at 4:44 AM, Ruilong Huo <rh...@pivotal.io> wrote:
>> >
>> >> Hi All,
>> >>
>> >> To make sure icg is ok after hawq is built and installed, we need to
>> >> install hive and pxf.
>> >> Anyone can share with us the instructions for that, especially on osx?
>> It
>> >> is better that it can be added to build and install section as well:
>> >> https://cwiki.apache.org/confluence/display/HAWQ/Build+and+Install
>> >>
>> >>
>> >> Best regards,
>> >> Ruilong Huo
>> >>
>> >
>> >
>> >
>> > --
>> > shivram mani
>>
>
>
Re: Build and install pxf
Posted by Ruilong Huo <rh...@pivotal.io>.
Thanks Shivram and Roman. It is good to make pxf standalone.
I think we can have pxf install instruction in hawq wiki for now and move
it to dedicate page once pxf is separated. Any better idea?
Best regards,
Ruilong Huo
On Thu, Jan 19, 2017 at 9:48 AM, Roman Shaposhnik <ro...@shaposhnik.org>
wrote:
> Ruilong, I've started an effort into making PXF into more of a standalone
> component. You can see it tracked over here:
> https://issues.apache.org/jira/browse/HAWQ-1233
>
> Keep an eye on that. We're also thinking of creating a standalone
> PXF client (along the lines of hadoop fs ...) to ease the adoption of
> the APIs.
>
> Thanks,
> Roman.
>
> On Wed, Jan 18, 2017 at 5:00 PM, Shivram Mani <sh...@gmail.com>
> wrote:
> > Ruilong, currently the only related information on building PXF can be
> > found here https://cwiki.apache.org/confluence/display/HAWQ/PXF but this
> > doesn't seem to capture all the necessary components. Will work on
> > providing detailed instructions in lines with the HAWQ Build/Install doc
> > for PXF as well.
> >
> > Regards
> > Shivram
> >
> > On Wed, Jan 18, 2017 at 4:44 AM, Ruilong Huo <rh...@pivotal.io> wrote:
> >
> >> Hi All,
> >>
> >> To make sure icg is ok after hawq is built and installed, we need to
> >> install hive and pxf.
> >> Anyone can share with us the instructions for that, especially on osx?
> It
> >> is better that it can be added to build and install section as well:
> >> https://cwiki.apache.org/confluence/display/HAWQ/Build+and+Install
> >>
> >>
> >> Best regards,
> >> Ruilong Huo
> >>
> >
> >
> >
> > --
> > shivram mani
>
Re: Build and install pxf
Posted by Roman Shaposhnik <ro...@shaposhnik.org>.
Ruilong, I've started an effort into making PXF into more of a standalone
component. You can see it tracked over here:
https://issues.apache.org/jira/browse/HAWQ-1233
Keep an eye on that. We're also thinking of creating a standalone
PXF client (along the lines of hadoop fs ...) to ease the adoption of
the APIs.
Thanks,
Roman.
On Wed, Jan 18, 2017 at 5:00 PM, Shivram Mani <sh...@gmail.com> wrote:
> Ruilong, currently the only related information on building PXF can be
> found here https://cwiki.apache.org/confluence/display/HAWQ/PXF but this
> doesn't seem to capture all the necessary components. Will work on
> providing detailed instructions in lines with the HAWQ Build/Install doc
> for PXF as well.
>
> Regards
> Shivram
>
> On Wed, Jan 18, 2017 at 4:44 AM, Ruilong Huo <rh...@pivotal.io> wrote:
>
>> Hi All,
>>
>> To make sure icg is ok after hawq is built and installed, we need to
>> install hive and pxf.
>> Anyone can share with us the instructions for that, especially on osx? It
>> is better that it can be added to build and install section as well:
>> https://cwiki.apache.org/confluence/display/HAWQ/Build+and+Install
>>
>>
>> Best regards,
>> Ruilong Huo
>>
>
>
>
> --
> shivram mani
Re: Build and install pxf
Posted by Shivram Mani <sh...@gmail.com>.
Ruilong, currently the only related information on building PXF can be
found here https://cwiki.apache.org/confluence/display/HAWQ/PXF but this
doesn't seem to capture all the necessary components. Will work on
providing detailed instructions in lines with the HAWQ Build/Install doc
for PXF as well.
Regards
Shivram
On Wed, Jan 18, 2017 at 4:44 AM, Ruilong Huo <rh...@pivotal.io> wrote:
> Hi All,
>
> To make sure icg is ok after hawq is built and installed, we need to
> install hive and pxf.
> Anyone can share with us the instructions for that, especially on osx? It
> is better that it can be added to build and install section as well:
> https://cwiki.apache.org/confluence/display/HAWQ/Build+and+Install
>
>
> Best regards,
> Ruilong Huo
>
--
shivram mani