[4/8] first pass at adding l10n for UI

[ke...@apache.org]

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/8fcfde7f/client/WEB-INF/classes/resources/messages_es.properties
----------------------------------------------------------------------
diff --git a/client/WEB-INF/classes/resources/messages_es.properties b/client/WEB-INF/classes/resources/messages_es.properties
new file mode 100644
index 0000000..8d8c8e6
--- /dev/null
+++ b/client/WEB-INF/classes/resources/messages_es.properties
@@ -0,0 +1,1547 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+
+#new labels (begin) **********************************************************************************************
+# label.egress.rules=Egress rules
+# message.acquire.new.ip.vpc=Please confirm that you would like to acquire a new IP for this VPC.
+# label.zoneWizard.trafficType.management=Management\: Traffic between CloudStack\\'s internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs
+# label.zoneWizard.trafficType.public=Public\: Traffic between the internet and virtual machines in the cloud.
+# label.zoneWizard.trafficType.guest=Guest\: Traffic between end-user virtual machines
+# label.zoneWizard.trafficType.storage=Storage\: Traffic between primary and secondary storage servers, such as VM templates and snapshots
+# label.quickview=Quickview
+# label.migrate.to.host=Migrate to host
+# label.migrate.to.storage=Migrate to storage
+label.stop=Detener 
+label.reboot=Reiniciar 
+label.destroy=Destroy 
+# label.restore=Restore
+# label.isolation.uri=Isolation URI
+# label.broadcast.uri=Broadcast URI
+# label.enable.s3=Enable S3-backed Secondary Storage
+# confirm.enable.s3=Please fill in the following information to enable support for S3-backed Secondary Storage
+# message.after.enable.s3=S3-backed Secondary Storage configured. Note\: When you leave this page, you will not be able to re-configure S3 again.
+# label.s3.access_key=Access Key
+label.s3.secret_key=clave secreta 
+# label.s3.bucket=Bucket
+# label.s3.endpoint=Endpoint
+# label.s3.use_https=Use HTTPS
+# label.s3.connection_timeout=Connection Timeout
+# label.s3.max_error_retry=Max Error Retry
+# label.s3.socket_timeout=Socket Timeout
+#new labels (end) ************************************************************************************************
+
+
+#modified labels (begin) *****************************************************************************************
+# label.site.to.site.VPN=Site-to-site VPN
+# message.zoneWizard.enable.local.storage=WARNING\: If you enable local storage for this zone, you must do the following, depending on where you would like your system VMs to launch\:<br/><br/>1. If system VMs need to be launched in primary storage, primary storage needs to be added to the zone after creation. You must also start the zone in a disabled state.<br/><br/>2. If system VMs need to be launched in local storage, system.vm.use.local.storage needs to be set to true before you enable the zone.<br/><br/><br/>Would you like to continue?
+#modified labels (end) *******************************************************************************************
+
+# label.configure.network.ACLs=Configure Network ACLs
+# label.network.ACLs=Network ACLs
+# label.add.network.ACL=Add network ACL
+# label.private.Gateway=Private Gateway
+# label.VPC.router.details=VPC router details
+# label.VMs.in.tier=VMs in tier
+# label.local.storage.enabled=Local storage enabled
+# label.tier.details=Tier details
+# label.edit.tags=Edit tags
+# label.action.enable.physical.network=Enable physical network
+# label.action.disable.physical.network=Disable physical network
+# message.action.enable.physical.network=Please confirm that you want to enable this physical network.
+# message.action.disable.physical.network=Please confirm that you want to disable this physical network.
+
+# label.select.tier=Select Tier
+# label.add.ACL=Add ACL
+# label.remove.ACL=Remove ACL
+# label.tier=Tier
+# label.network.ACL=Network ACL
+# label.network.ACL.total=Network ACL Total
+# label.add.new.gateway=Add new gateway
+# message.add.new.gateway.to.vpc=Please specify the information to add a new gateway to this VPC.
+# label.delete.gateway=delete gateway
+# message.delete.gateway=Please confirm you want to delete the gateway
+# label.CIDR.of.destination.network=CIDR of destination network
+# label.add.route=Add route
+# label.add.static.route=Add static route
+# label.remove.static.route=Remove static route
+# label.add.VPN.gateway=Add VPN Gateway
+# message.add.VPN.gateway=Please confirm that you want to add a VPN Gateway
+# label.VPN.gateway=VPN Gateway
+# label.delete.VPN.gateway=delete VPN Gateway
+# message.delete.VPN.gateway=Please confirm that you want to delete this VPN Gateway
+# label.VPN.connection=VPN Connection
+# label.IPsec.preshared.key=IPsec Preshared-Key
+# label.IKE.policy=IKE policy
+# label.ESP.policy=ESP policy
+# label.create.VPN.connection=Create VPN Connection
+# label.VPN.customer.gateway=VPN Customer Gateway
+# label.CIDR.list=CIDR list
+# label.IKE.lifetime=IKE Lifetime (second)
+# label.ESP.lifetime=ESP Lifetime(second)
+# label.dead.peer.detection=Dead Peer Detection
+# label.reset.VPN.connection=Reset VPN connection
+# message.reset.VPN.connection=Please confirm that you want to reset VPN connection
+# label.delete.VPN.connection=delete VPN connection
+# message.delete.VPN.connection=Please confirm that you want to delete VPN connection
+# label.add.new.tier=Add new tier
+# label.add.VM.to.tier=Add VM to tier
+# label.remove.tier=Remove tier
+
+# label.local.storage.enabled=Local storage enabled
+# label.associated.network=Associated Network
+# label.add.port.forwarding.rule=Add port forwarding rule
+# label.dns=DNS
+
+# label.vpc=VPC
+# label.vpc.id=VPC ID
+# label.tier=Tier
+# label.add.vpc=Add VPC
+# label.super.cidr.for.guest.networks=Super CIDR for Guest Networks
+# label.DNS.domain.for.guest.networks=DNS domain for Guest Networks
+# label.configure.vpc=Configure VPC
+# label.edit.vpc=Edit VPC
+# label.restart.vpc=restart VPC
+# message.restart.vpc=Please confirm that you want to restart the VPC
+# label.remove.vpc=remove VPC
+# message.remove.vpc=Please confirm that you want to remove the VPC
+# label.vpn.customer.gateway=VPN Customer Gateway
+# label.add.vpn.customer.gateway=Add VPN Customer Gateway
+# label.IKE.encryption=IKE Encryption
+# label.IKE.hash=IKE Hash
+# label.IKE.DH=IKE DH
+# label.ESP.encryption=ESP Encryption
+# label.ESP.hash=ESP Hash
+# label.perfect.forward.secrecy=Perfect Forward Secrecy
+# label.IKE.lifetime=IKE Lifetime (second)
+# label.ESP.lifetime=ESP Lifetime(second)
+# label.dead.peer.detection=Dead Peer Detection
+# label.delete.VPN.customer.gateway=delete VPN Customer Gateway
+# message.delete.VPN.customer.gateway=Please confirm that you want to delete this VPN Customer Gateway
+
+# label.network.domain.text=Network domain
+# label.memory.mb=Memory (in MB)
+# label.cpu.mhz=CPU (in MHz)
+
+# message.action.remove.host=Please confirm that you want to remove this host.
+
+# message.action.reboot.router=All services provided by this virtual router will be interrupted. Please confirm that you want to reboot this router.
+# message.action.stop.router=All services provided by this virtual router will be interrupted. Please confirm that you want to stop this router.
+# message.restart.network=All services provided by this network will be interrupted. Please confirm that you want to restart this network.
+
+
+label.ipaddress=Dirección IP 
+# label.vcdcname=vCenter DC name
+# label.vcipaddress=vCenter IP Address
+# label.vsmctrlvlanid=Control VLAN ID
+# label.vsmpktvlanid=Packet VLAN ID
+# label.vsmstoragevlanid=Storage VLAN ID
+# label.nexusVswitch=Nexus 1000v
+# label.action.delete.nexusVswitch=Delete Nexus 1000v
+# label.action.enable.nexusVswitch=Enable Nexus 1000v
+# label.action.disable.nexusVswitch=Disable Nexus 1000v
+# label.action.list.nexusVswitch=List Nexus 1000v
+# message.action.delete.nexusVswitch=Please confirm that you want to delete this nexus 1000v
+# message.action.enable.nexusVswitch=Please confirm that you want to enable this nexus 1000v
+# message.action.disable.nexusVswitch=Please confirm that you want to disable this nexus 1000v
+# message.specify.url=Please specify URL
+# label.select.instance.to.attach.volume.to=Select instance to attach volume to
+# label.upload=Upload
+# label.upload.volume=Upload volume
+# label.virtual.routers=Virtual Routers
+# label.primary.storage.count=Primary Storage Pools
+# label.secondary.storage.count=Secondary Storage Pools
+# label.number.of.system.vms=Number of System VMs
+# label.number.of.virtual.routers=Number of Virtual Routers
+# label.action.register.iso=Register ISO
+# label.isolation.method=Isolation method
+# label.action.register.template=Register template
+# label.checksum=MD5 checksum
+label.vpn=VPN 
+label.vlan=VLAN 
+
+
+# label.management.ips=Management IP Addresses
+# label.devices=Devices
+# label.rules=Rules
+# label.traffic.label=Traffic label
+# label.vm.state=VM state
+# message.setup.physical.network.during.zone.creation.basic=When adding a basic zone, you can set up one physical network, which corresponds to a NIC on the hypervisor. The network carries several types of traffic.<br/><br/>You may also <strong>drag and drop</strong> other traffic types onto the physical network.
+# label.domain.router=Domain router
+# label.console.proxy=Console proxy
+# label.secondary.storage.vm=Secondary storage VM
+# label.add.netScaler.device=Add Netscaler device
+# label.add.F5.device=Add F5 device
+# label.add.SRX.device=Add SRX device
+# label.account.and.security.group=Account, Security group
+# label.fetch.latest=Fetch latest
+# label.system.offering=System Offering
+# message.validate.instance.name=Instance name can not be longer than 63 characters. Only ASCII letters a~z, A~Z, digits 0~9, hyphen are allowed. Must start with a letter and end with a letter or a digit.
+
+
+# label.isolated.networks=Isolated networks
+# label.latest.events=Latest events
+# state.Enabled=Enabled
+# label.system.wide.capacity=System-wide capacity
+# label.network.service.providers=Network Service Providers
+# message.launch.zone=Zone is ready to launch; please proceed to the next step.
+# error.unable.to.reach.management.server=Unable to reach Management Server
+# label.internal.name=Internal name
+# message.configure.all.traffic.types=You have multiple physical networks; please configure labels for each traffic type by clicking on the Edit button.
+# message.edit.traffic.type=Please specify the traffic label you want associated with this traffic type.
+# label.edit.traffic.type=Edit traffic type
+# label.label=Label
+# label.max.networks=Max. networks
+# error.invalid.username.password=Invalid username or password
+# message.enabling.security.group.provider=Enabling Security Group provider
+# message.adding.Netscaler.provider=Adding Netscaler provider
+# message.creating.guest.network=Creating guest network
+# label.action.delete.physical.network=Delete physical network
+# message.action.delete.physical.network=Please confirm that you want to delete this physical network
+# message.installWizard.copy.whatIsAHost=A host is a single computer. Hosts provide the computing resources that run the guest virtual machines. Each host has hypervisor software installed on it to manage the guest VMs (except for bare metal hosts, which are a special case discussed in the Advanced Installation Guide). For example, a Linux KVM-enabled server, a Citrix XenServer server, and an ESXi server are hosts. In a Basic Installation, we use a single host running XenServer or KVM.<br/><br/>The host is the smallest organizational unit within a CloudStack&\#8482; deployment. Hosts are contained within clusters, clusters are contained within pods, and pods are contained within zones. 
+
+
+# label.add.compute.offering=Add compute offering
+# label.compute.offering=Compute offering
+# label.compute.offerings=Compute offerings
+# label.select.offering=Select offering
+# label.menu.infrastructure=Infrastructure
+# label.sticky.tablesize=Table size
+# label.sticky.expire=Expires
+# label.sticky.cookie-name=Cookie name
+label.sticky.mode=modo
+# label.sticky.length=Length
+# label.sticky.holdtime=Hold time
+# label.sticky.request-learn=Request learn
+# label.sticky.prefix=Prefix
+# label.sticky.nocache=No cache
+# label.sticky.indirect=Indirect
+# label.sticky.postonly=Post only
+label.sticky.domain=dominio 
+# state.Allocating=Allocating
+# state.Migrating=Migrating
+# error.please.specify.physical.network.tags=Network offerings is not available until you specify tags for this physical network.
+
+
+# state.Stopping=Stopping
+# message.add.load.balancer.under.ip=The load balancer rule has been added under IP\:
+# message.select.instance=Please select an instance.
+# label.select=Select
+# label.select.vm.for.static.nat=Select VM for static NAT
+# label.select.instance=Select instance
+# label.nat.port.range=NAT Port Range
+# label.static.nat.vm.details=Static NAT VM Details
+# label.edit.lb.rule=Edit LB rule
+message.migrate.instance.to.host=Por favor, confirmar que desea mover la instancia a otro host.
+label.migrate.instance.to.host=Migrar instancia a otro host.
+message.migrate.instance.to.ps=Por favor, confirmar que desea mover la instancia a otro primary storage.
+label.migrate.instance.to.ps=Migrar instancia a otro primary storage.
+# label.corrections.saved=Corrections saved
+# message.installWizard.copy.whatIsSecondaryStorage=Secondary storage is associated with a zone, and it stores the following\:<ul><li>Templates - OS images that can be used to boot VMs and can include additional configuration information, such as installed applications</li><li>ISO images - OS images that can be bootable or non-bootable</li><li>Disk volume snapshots - saved copies of VM data which can be used for data recovery or to create new templates</ul>
+# message.installWizard.copy.whatIsPrimaryStorage=A CloudStack&\#8482; cloud infrastructure makes use of two types of storage\: primary storage and secondary storage. Both of these can be iSCSI or NFS servers, or localdisk.<br/><br/><strong>Primary storage</strong> is associated with a cluster, and it stores the disk volumes of each guest VM for all the VMs running on hosts in that cluster. The primary storage server is typically located close to the hosts. 
+# message.installWizard.copy.whatIsACluster=A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Virtual machine instances (VMs) can be live-migrated from one host to another within the same cluster, without interrupting service to the user. A cluster is the third-largest organizational unit within a CloudStack&\#8482; deployment. Clusters are contained within pods, and pods are contained within zones.<br/><br/>CloudStack&\#8482; allows multiple clusters in a cloud deployment, but for a Basic Installation, we only need one cluster. 
+# message.installWizard.copy.whatIsAPod=A pod often represents a single rack. Hosts in the same pod are in the same subnet.<br/><br/>A pod is the second-largest organizational unit within a CloudStack&\#8482; deployment. Pods are contained within zones. Each zone can contain one or more pods; in the Basic Installation, you will have just one pod in your zone.
+# message.installWizard.copy.whatIsAZone=A zone is the largest organizational unit within a CloudStack&\#8482; deployment. A zone typically corresponds to a single datacenter, although it is permissible to have multiple zones in a datacenter. The benefit of organizing infrastructure into zones is to provide physical isolation and redundancy. For example, each zone can have its own power supply and network uplink, and the zones can be widely separated geographically (though this is not required).
+# message.installWizard.copy.whatIsCloudStack=CloudStack&\#8482 is a software platform that pools computing resources to build public, private, and hybrid Infrastructure as a Service (IaaS) clouds. CloudStack&\#8482 manages the network, storage, and compute nodes that make up a cloud infrastructure. Use CloudStack&\#8482 to deploy, manage, and configure cloud computing environments.<br/><br/>Extending beyond individual virtual machine images running on commodity hardware, CloudStack&\#8482 provides a turnkey cloud infrastructure software stack for delivering virtual datacenters as a service - delivering all of the essential components to build, deploy, and manage multi-tier and multi-tenant cloud applications. Both open-source and Premium versions are available, with the open-source version offering nearly identical features. 
+# message.installWizard.tooltip.addSecondaryStorage.path=The exported path, located on the server you specified above
+message.installWizard.tooltip.addSecondaryStorage.nfsServer=Dirección IP del servidor NFS que contiene el secondary storage
+# message.installWizard.tooltip.addPrimaryStorage.path=(for NFS) In NFS this is the exported path from the server. Path (for SharedMountPoint).  With KVM this is the path on each host that is where this primary storage is mounted.  For example, "/mnt/primary".
+# message.installWizard.tooltip.addPrimaryStorage.server=(for NFS, iSCSI, or PreSetup) The IP address or DNS name of the storage device.
+message.installWizard.tooltip.addPrimaryStorage.name=\ Nombre para el storage
+# message.installWizard.tooltip.addHost.password=This is the password for the user named above (from your XenServer install).
+message.installWizard.tooltip.addHost.username=Generalmente root
+message.installWizard.tooltip.addHost.hostname=El nombre DNS o dirección IP del host
+message.installWizard.tooltip.addCluster.name=Nombre del  Cluster. Puede ser  alfanumérico .Este no es usado por CloudStack 
+# message.installWizard.tooltip.addPod.reservedSystemEndIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
+# message.installWizard.tooltip.addPod.reservedSystemStartIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
+# message.installWizard.tooltip.addPod.reservedSystemNetmask=The netmask in use on the subnet the guests will use.
+message.installWizard.tooltip.addPod.reservedSystemGateway=El gateway ,puerta de enlace, para los host en ese pod.
+message.installWizard.tooltip.addPod.name=Nombre del POD
+# message.installWizard.tooltip.configureGuestTraffic.guestEndIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
+# message.installWizard.tooltip.configureGuestTraffic.guestStartIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
+# message.installWizard.tooltip.configureGuestTraffic.guestNetmask=The netmask in use on the subnet that the guests should use
+message.installWizard.tooltip.configureGuestTraffic.guestGateway=El gatway, puerta de enlace, que las maquinas guest deben usar. 
+message.installWizard.tooltip.configureGuestTraffic.description=Una breve descripción para su red.
+message.installWizard.tooltip.configureGuestTraffic.name=Nombre de su RED 
+# message.installWizard.tooltip.addZone.internaldns2=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
+# message.installWizard.tooltip.addZone.internaldns1=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
+# message.installWizard.tooltip.addZone.dns2=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
+message.installWizard.tooltip.addZone.name=Nombre de la zona.
+# message.installWizard.tooltip.addZone.dns1=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
+message.setup.successful=La configuración de la cloud finalizo satisfactoriamente.
+# label.may.continue=You may now continue.
+error.installWizard.message=Algo salio mal, debes ir para atrás y corregir los error. 
+# message.installWizard.now.building=Now building your cloud... 
+message.installWizard.click.retry=Haz click en el botón para re-intentar el lanzamiento de la instancia.
+label.launch=Lanzar
+label.installWizard.click.launch=Click en el botón de lanzar. 
+label.congratulations=Felicitaciones \! 
+# label.installWizard.addSecondaryStorageIntro.subtitle=What is secondary storage?
+# label.installWizard.addSecondaryStorageIntro.title=Let&rsquo;s add secondary storage
+# label.installWizard.addPrimaryStorageIntro.subtitle=What is primary storage?
+# label.installWizard.addPrimaryStorageIntro.title=Let&rsquo;s add primary storage
+# label.installWizard.addHostIntro.subtitle=What is a host?
+# label.installWizard.addHostIntro.title=Let&rsquo;s add a host
+# label.installWizard.addClusterIntro.subtitle=What is a cluster?
+# label.installWizard.addClusterIntro.title=Let&rsquo;s add a cluster
+# label.installWizard.addPodIntro.subtitle=What is a pod?
+# label.installWizard.addPodIntro.title=Let&rsquo;s add a pod
+# label.installWizard.addZone.title=Add zone
+# label.installWizard.addZoneIntro.subtitle=What is a zone?
+# label.installWizard.addZoneIntro.title=Let&rsquo;s add a zone
+# error.password.not.match=The password fields do not match
+# label.confirm.password=Confirm password
+# message.change.password=Please change your password.
+# label.save.and.continue=Save and continue
+# label.skip.guide=I have used CloudStack before, skip this guide
+# label.continue.basic.install=Continue with basic installation
+# label.introduction.to.cloudstack=Introduction to CloudStack&\#8482
+# label.what.is.cloudstack=What is CloudStack&\#8482?
+# label.hints=Hints
+# label.installWizard.subtitle=This tour will aid you in setting up your CloudStack&\#8482 installation
+# label.continue=Continue
+# label.installWizard.title=Hello and Welcome to CloudStack&\#8482
+# label.agree=Agree
+# label.manage.resources=Manage Resources
+# label.port.forwarding.policies=Port forwarding policies
+# label.load.balancing.policies=Load balancing policies
+# label.networking.and.security=Networking and security
+# label.bandwidth=Bandwidth
+label.virtual.machines=Maquinas virtuales
+# label.compute.and.storage=Compute and Storage
+label.task.completed=Tarea finalizada. 
+# label.update.project.resources=Update project resources
+# label.remove.project.account=Remove project account
+# label.item.listing=Item listing
+message.select.item=Por favor, seleccionar un item . 
+label.removing=Borrando.
+label.invite=Invitar
+# label.add.by=Add by
+# label.max.vms=Max. user VMs
+# label.max.public.ips=Max. public IPs
+label.max.volumes=Maxima cantidad de Volumes
+# label.max.snapshots=Max. snapshots
+# label.max.templates=Max. templates
+# label.max.vpcs=Max. VPCs
+# label.project.dashboard=Project dashboard
+label.remind.later=Recordar mas tarde 
+# label.invited.accounts=Invited accounts
+label.invite.to=Invitar a .
+# label.add.accounts.to=Add accounts to
+# label.add.accounts=Add accounts
+label.project.name=Nombre del Proyecto
+# label.create.project=Create project
+label.networks=Redes
+label.launch.vm=Lanzar maquina virtual
+label.new.vm=Nueva maquina virtual
+label.previous=Previo
+label.add.to.group=Agregar al grupo
+# message.vm.review.launch=Please review the following information and confirm that your virtual instance is correct before launch.
+# message.select.security.groups=Please select security group(s) for your new VM
+label.new=Nuevo
+# message.please.select.networks=Please select networks for your virtual machine.
+# message.please.proceed=Please proceed to the next step.
+# message.zone.no.network.selection=The zone you selected does not have any choices for network selection.
+label.no.thanks=No, gracias 
+label.my.templates=Mis plantillas
+# message.select.template=Please select a template for your new virtual instance.
+# message.select.iso=Please select an ISO for your new virtual instance.
+# message.template.desc=OS image that can be used to boot VMs
+# message.iso.desc=Disc image containing data or bootable media for OS
+# label.select.iso.or.template=Select ISO or template
+# message.select.a.zone=A zone typically corresponds to a single datacenter. Multiple zones help make the cloud more reliable by providing physical isolation and redundancy.
+label.select.a.zone=Seleccione una zona.
+# label.review=Review
+# label.select.a.template=Select a template
+# label.setup=Setup
+state.Allocated=Asignados 
+# changed.item.properties=Changed item properties
+# label.apply=Apply
+# label.default=Default
+# label.viewing=Viewing
+# label.move.to.top=Move to top
+# label.move.up.row=Move up one row
+# label.move.down.row=Move down one row
+# label.move.to.bottom=Move to bottom
+# label.drag.new.position=Drag to new position
+# label.order=Order
+# label.no.data=No data to show
+# label.change.value=Change value
+# label.clear.list=Clear list
+# label.full.path=Full path
+# message.add.domain=Please specify the subdomain you want to create under this domain
+# message.delete.user=Please confirm that you would like to delete this user.
+# message.enable.user=Please confirm that you would like to enable this user.
+# message.disable.user=Please confirm that you would like to disable this user.
+# message.generate.keys=Please confirm that you would like to generate new keys for this user.
+# message.update.resource.count=Please confirm that you want to update resource counts for this account.
+# message.edit.account=Edit ("-1" indicates no limit to the amount of resources create)
+# label.total.of.vm=Total of VM
+# label.total.of.ip=Total of IP Address
+# state.enabled=Enabled
+# message.action.download.iso=Please confirm that you want to download this ISO.
+# message.action.download.template=Please confirm that you want to download this template.
+# label.destination.zone=Destination Zone
+# label.keyboard.type=Keyboard type
+# label.nic.adapter.type=NIC adapter type
+# label.root.disk.controller=Root disk controller
+# label.community=Community
+# label.remove.egress.rule=Remove egress rule
+# label.add.egress.rule=Add egress rule
+# label.egress.rule=Egress rule
+# label.remove.ingress.rule=Remove ingress rule
+# label.delete.vpn.user=Delete VPN user
+# label.add.vpn.user=Add VPN user
+# label.remove.pf=Remove port forwarding rule
+# label.remove.vm.from.lb=Remove VM from load balancer rule
+# label.add.vms.to.lb=Add VM(s) to load balancer rule
+# label.add.vm=Add VM
+# label.remove.static.nat.rule=Remove static NAT rule
+# label.remove.rule=Remove rule
+# label.add.static.nat.rule=Add static NAT rule
+# label.add.rule=Add rule
+label.configuration=Configuración 
+# message.disable.vpn=Are you sure you want to disable VPN?
+# label.disable.vpn=Disable VPN
+message.enable.vpn=VPN de acceso actualmente no está habilitado. Por favor, <a href\="\#" id\="enable_vpn_link"> haga clic aquí </a> para habilitar VPN. 
+# label.enable.vpn=Enable VPN
+# message.acquire.new.ip=Please confirm that you would like to acquire a new IP for this network.
+# label.elastic=Elastic
+# label.my.network=My network
+# label.add.vms=Add VMs
+# label.configure=Configure
+# label.stickiness=Stickiness
+# label.source=Source
+# label.least.connections=Least connections
+# label.round.robin=Round-robin
+# label.restart.required=Restart required
+# label.clean.up=Clean up
+# label.restart.network=Restart network
+# label.edit.network.details=Edit network details
+# label.add.guest.network=Add guest network
+# label.guest.networks=Guest networks
+# message.ip.address.changed=Your IP addresses may have changed; would you like to refresh the listing? Note that in this case the details pane will close.
+# state.BackingUp=Backing Up
+# state.BackedUp=Backed Up
+# label.done=Done
+# label.vm.name=VM name
+# message.migrate.volume=Please confirm that you want to migrate volume to another primary storage.
+# label.migrate.volume=Migrate volume to another primary storage
+# message.create.template=Are you sure you want to create template?
+# label.create.template=Create template
+# message.download.volume.confirm=Please confirm that you want to download this volume
+# message.detach.disk=Are you sure you want to detach this disk?
+# state.ready=Ready
+# state.Ready=Ready
+# label.vm.display.name=VM display name
+# label.select-view=Select view
+# label.local.storage=Local Storage
+# label.direct.ips=Shared Network IPs
+# label.view.all=View all
+# label.zone.details=Zone details
+# message.alert.state.detected=Alert state detected
+# state.Starting=Starting
+# state.Expunging=Expunging
+# state.Creating=Creating
+# message.decline.invitation=Are you sure you want to decline this project invitation?
+# label.decline.invitation=Decline invitation
+# message.confirm.join.project=Please confirm you wish to join this project.
+# message.join.project=You have now joined a project. Please switch to Project view to see the project.
+# label.accept.project.invitation=Accept project invitation
+# label.token=Token
+# label.project.id=Project ID
+# message.enter.token=Please enter the token that you were given in your invite e-mail.
+# label.enter.token=Enter token
+# state.Accepted=Accepted
+# state.Pending=Pending
+# state.Completed=Completed
+# state.Declined=Declined
+# label.project=Project
+# label.invitations=Invitations
+# label.delete.project=Delete project
+# message.delete.project=Are you sure you want to delete this project?
+# message.activate.project=Are you sure you want to activate this project?
+# label.activate.project=Activate Project
+# label.suspend.project=Suspend Project
+# message.suspend.project=Are you sure you want to suspend this project?
+# state.Suspended=Suspended
+# label.edit.project.details=Edit project details
+# label.new.project=New Project
+# state.Active=Active
+state.Disabled=personas de movilidad reducida 
+# label.projects=Projects
+# label.make.project.owner=Make account project owner
+# label.remove.project.account=Remove project account
+# message.project.invite.sent=Invite sent to user; they will be added to the project once they accept the invitation
+# label.add.account.to.project=Add account to project
+# label.revoke.project.invite=Revoke invitation
+# label.project.invite=Invite to project
+# label.select.project=Select Project
+# message.no.projects=You do not have any projects.<br/>Please create a new one from the projects section.
+# message.no.projects.adminOnly=You do not have any projects.<br/>Please ask your administrator to create a new project.
+# message.pending.projects.1=You have pending project invitations\:
+# message.pending.projects.2=To view, please go to the projects section, then select invitations from the drop-down.
+# message.instanceWizard.noTemplates=You do not have any templates available; please add a compatible template, and re-launch the instance wizard.
+# label.view=View
+# instances.actions.reboot.label=Reboot instance
+# label.filterBy=Filter by
+# label.ok=OK
+# notification.reboot.instance=Reboot instance
+# notification.start.instance=Start instance
+# notification.stop.instance=Stop instance
+# label.display.name=Display name
+# label.zone.name=Zone name
+# ui.listView.filters.all=All
+# ui.listView.filters.mine=Mine
+# state.Running=Running
+# state.Stopped=Stopped
+# state.Destroyed=Destroyed
+state.Error=Error 
+# message.reset.password.warning.notPasswordEnabled=The template of this instance was created without password enabled
+# message.reset.password.warning.notStopped=Your instance must be stopped before attempting to change its current password
+# label.notifications=Notifications
+# label.default.view=Default View
+# label.project.view=Project View
+
+# message.add.system.service.offering=Please fill in the following data to add a new system service offering.
+# message.action.delete.system.service.offering=Please confirm that you want to delete this system service offering.
+# label.action.delete.system.service.offering=Delete System Service Offering
+# label.hypervisor.capabilities=Hypervisor capabilities
+# label.hypervisor.version=Hypervisor version
+# label.max.guest.limit=Max guest limit
+# label.add.network.offering=Add network offering
+# label.supported.services=Supported Services
+# label.service.capabilities=Service Capabilities
+# label.guest.type=Guest Type
+# label.specify.IP.ranges=Specify IP ranges
+# label.conserve.mode=Conserve mode
+# label.created.by.system=Created by system
+# label.menu.system.service.offerings=System Offerings
+# label.add.system.service.offering=Add System Service Offering
+# label.redundant.router.capability=Redundant router capability
+# label.supported.source.NAT.type=Supported Source NAT type
+# label.elastic.LB=Elastic LB
+# label.LB.isolation=LB isolation
+# label.elastic.IP=Elastic IP
+# label.network.label.display.for.blank.value=Use default gateway
+# label.xen.traffic.label=XenServer traffic label
+# label.kvm.traffic.label=KVM traffic label
+# label.vmware.traffic.label=VMware traffic label
+# label.start.IP=Start IP
+# label.end.IP=End IP
+# label.remove.ip.range=Remove IP range
+# label.ip.ranges=IP Ranges
+# label.start.vlan=Start Vlan
+# label.end.vlan=End Vlan
+# label.broadcast.domain.range=Broadcast domain range
+# label.compute=Compute
+# message.add.guest.network=Please confirm that you would like to add a guest network
+# label.subdomain.access=Subdomain Access
+# label.guest.start.ip=Guest start IP
+# label.guest.end.ip=Guest end IP
+# label.virtual.router=Virtual Router
+# label.physical.network.ID=Physical network ID
+# label.destination.physical.network.id=Destination physical network ID
+# label.dhcp=DHCP
+# label.destroy.router=Destroy router
+# message.confirm.destroy.router=Please confirm that you would like to destroy this router
+# label.change.service.offering=Change service offering
+# label.view.console=View console
+# label.redundant.state=Redundant state
+# label.enable.provider=Enable provider
+# message.confirm.enable.provider=Please confirm that you would like to enable this provider
+# label.disable.provider=Disable provider
+# message.confirm.disable.provider=Please confirm that you would like to disable this provider
+# label.shutdown.provider=Shutdown provider
+# message.confirm.shutdown.provider=Please confirm that you would like to shutdown this provider
+# label.netScaler=NetScaler
+# label.add.new.NetScaler=Add new NetScaler
+# label.capacity=Capacity
+# label.dedicated=Dedicated
+# label.f5=F5
+# label.add.new.F5=Add new F5
+# label.srx=SRX
+# label.providers=Providers
+# label.add.new.SRX=Add new SRX
+# label.timeout=Timeout
+# label.public.network=Public network
+# label.private.network=Private network
+# label.enable.swift=Enable Swift
+# confirm.enable.swift=Please fill in the following information to enable support for Swift
+# message.after.enable.swift=Swift configured. Note\: When you leave this page, you will not be able to re-configure Swift again.
+# label.key=Key
+# label.delete.NetScaler=Delete NetScaler
+# message.confirm.delete.NetScaler=Please confirm that you would like to delete NetScaler
+# label.delete.F5=Delete F5
+# message.confirm.delete.F5=Please confirm that you would like to delete F5
+# label.delete.SRX=Delete SRX
+# message.confirm.delete.SRX=Please confirm that you would like to delete SRX
+# label.pods=Pods
+# label.pod.name=Pod name
+# label.reserved.system.gateway=Reserved system gateway
+# label.reserved.system.netmask=Reserved system netmask
+# label.start.reserved.system.IP=Start Reserved system IP
+# label.end.reserved.system.IP=End Reserved system IP
+# label.clusters=Clusters
+# label.cluster.name=Cluster Name
+# label.host.MAC=Host MAC
+# label.agent.username=Agent Username
+# label.agent.password=Agent Password
+# message.confirm.action.force.reconnect=Please confirm that you want to force reconnect this host.
+# label.resource.state=Resource state
+# label.LUN.number=LUN \#
+# message.confirm.remove.IP.range=Please confirm that you would like to remove this IP range.
+# message.tooltip.zone.name=A name for the zone.
+# message.tooltip.dns.1=Name of a DNS server for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
+# message.tooltip.dns.2=A second DNS server name for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
+# message.tooltip.internal.dns.1=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
+# message.tooltip.internal.dns.2=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
+# message.tooltip.network.domain=A DNS suffix that will create a custom domain name for the network that is accessed by guest VMs.
+# message.tooltip.pod.name=A name for this pod.
+# message.tooltip.reserved.system.gateway=The gateway for the hosts in the pod.
+# message.tooltip.reserved.system.netmask=The network prefix that defines the pod subnet. Uses CIDR notation.
+# message.creating.zone=Creating zone
+# message.creating.physical.networks=Creating physical networks
+# message.configuring.physical.networks=Configuring physical networks
+# message.adding.Netscaler.device=Adding Netscaler device
+# message.creating.pod=Creating pod
+# message.configuring.public.traffic=Configuring public traffic
+# message.configuring.storage.traffic=Configuring storage traffic
+# message.configuring.guest.traffic=Configuring guest traffic
+# message.creating.cluster=Creating cluster
+# message.adding.host=Adding host
+# message.creating.primary.storage=Creating primary storage
+# message.creating.secondary.storage=Creating secondary storage
+# message.Zone.creation.complete=Zone creation complete
+# message.enabling.zone=Enabling zone
+# error.something.went.wrong.please.correct.the.following=Something went wrong; please correct the following
+# error.could.not.enable.zone=Could not enable zone
+# message.zone.creation.complete.would.you.like.to.enable.this.zone=Zone creation complete. Would you like to enable this zone?
+# message.please.add.at.lease.one.traffic.range=Please add at least one traffic range.
+# message.you.must.have.at.least.one.physical.network=You must have at least one physical network
+# message.please.select.a.different.public.and.management.network.before.removing=Please select a different public and management network before removing
+
+# label.zone.type=Zone Type
+# label.setup.zone=Setup Zone
+# label.setup.network=Setup Network
+# label.add.resources=Add Resources
+label.launch=Lanzar
+# label.set.up.zone.type=Set up zone type
+# message.please.select.a.configuration.for.your.zone=Please select a configuration for your zone.
+# message.desc.basic.zone=Provide a single network where each VM instance is assigned an IP directly from the network. Guest isolation can be provided through layer-3 means such as security groups (IP address source filtering).
+# label.basic=Basic
+# message.desc.advanced.zone=For more sophisticated network topologies. This network model provides the most flexibility in defining guest networks and providing custom network offerings such as firewall, VPN, or load balancer support.
+label.advanced=Avanzado 
+# message.desc.zone=A zone is the largest organizational unit in CloudStack, and it typically corresponds to a single datacenter. Zones provide physical isolation and redundancy. A zone consists of one or more pods (each of which contains hosts and primary storage servers) and a secondary storage server which is shared by all pods in the zone.
+# label.physical.network=Physical Network        
+# label.public.traffic=Public traffic     
+# label.guest.traffic=Guest Traffic
+# label.storage.traffic=Storage Traffic
+# message.setup.physical.network.during.zone.creation=When adding an advanced zone, you need to set up one or more physical networks. Each network corresponds to a NIC on the hypervisor. Each physical network can carry one or more types of traffic, with certain restrictions on how they may be combined.<br/><br/><strong>Drag and drop one or more traffic types</strong> onto each physical network.
+# label.add.physical.network=Add physical network
+# label.traffic.types=Traffic Types
+# label.management=Management
+# label.guest=Guest
+# label.please.specify.netscaler.info=Please specify Netscaler info
+# message.public.traffic.in.advanced.zone=Public traffic is generated when VMs in the cloud access the internet. Publicly-accessible IPs must be allocated for this purpose. End users can use the CloudStack UI to acquire these IPs to implement NAT between their guest network and their public network.<br/><br/>Provide at least one range of IP addresses for internet traffic.
+# message.public.traffic.in.basic.zone=Public traffic is generated when VMs in the cloud access the Internet or provide services to clients over the Internet. Publicly accessible IPs must be allocated for this purpose. When a instance is created, an IP from this set of Public IPs will be allocated to the instance in addition to the guest IP address. Static 1-1 NAT will be set up automatically between the public IP and the guest IP. End users can also use the CloudStack UI to acquire additional IPs to implement static NAT between their instances and the public IP.
+# message.add.pod.during.zone.creation=Each zone must contain in one or more pods, and we will add the first pod now. A pod contains hosts and primary storage servers, which you will add in a later step. First, configure a range of reserved IP addresses for CloudStack's internal management traffic. The reserved IP range must be unique for each zone in the cloud.
+# message.guest.traffic.in.advanced.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of VLAN IDs to carry guest traffic for each physical network.
+# message.guest.traffic.in.basic.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of IP addresses that CloudStack can assign to guest VMs. Make sure this range does not overlap the reserved system IP range.
+# message.storage.traffic=Traffic between CloudStack's internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs. Please configure storage traffic here.
+# message.desc.cluster=Each pod must contain one or more clusters, and we will add the first cluster now. A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Each cluster consists of one or more hosts and one or more primary storage servers.
+# message.desc.host=Each cluster must contain at least one host (computer) for guest VMs to run on, and we will add the first host now. For a host to function in CloudStack, you must install hypervisor software on the host, assign an IP address to the host, and ensure the host is connected to the CloudStack management server.<br/><br/>Give the host's DNS or IP address, the user name (usually root) and password, and any labels you use to categorize hosts.
+# message.desc.primary.storage=Each cluster must contain one or more primary storage servers, and we will add the first one now. Primary storage contains the disk volumes for all the VMs running on hosts in the cluster. Use any standards-compliant protocol that is supported by the underlying hypervisor.
+# message.desc.secondary.storage=Each zone must have at least one NFS or secondary storage server, and we will add the first one now. Secondary storage stores VM templates, ISO images, and VM disk volume snapshots. This server must be available to all hosts in the zone.<br/><br/>Provide the IP address and exported path.
+# label.launch.zone=Launch zone 
+# message.please.wait.while.zone.is.being.created=Please wait while your zone is being created; this may take a while...
+
+# label.load.balancing=Load Balancing
+# label.static.nat.enabled=Static NAT Enabled
+# label.zones=Zones
+# label.view.more=View more
+# label.number.of.zones=Number of Zones
+# label.number.of.pods=Number of Pods
+# label.number.of.clusters=Number of Clusters
+# label.number.of.hosts=Number of Hosts
+# label.total.hosts=Total Hosts
+label.total.CPU=Total CPU
+# label.total.memory=Total Memory
+# label.total.storage=Total Storage
+# label.purpose=Purpose
+
+
+
+
+label.action.migrate.router=migrar Router
+label.action.migrate.router.processing=Migración router ....
+message.migrate.router.confirm=Por favor, confirme el huésped que desea migrar el router\:
+label.migrate.router.to=Router para migrar
+
+label.action.migrate.systemvm=Migrar del sistema VM
+label.action.migrate.systemvm.processing=La migración de VM del sistema ....
+message.migrate.systemvm.confirm=Por favor, confirme el huésped que desea migrar la máquina virtual de sistema\:
+label.migrate.systemvm.to=Migrar máquina virtual del sistema para
+
+
+mode=modo
+side.by.side=Juntos
+inline=en línea
+
+extractable=extraíble
+
+label.ocfs2=OCFS2
+
+label.action.edit.host=edición Anfitrión
+
+network.rate=Tasa de Red 
+
+ICMP.type=Tipo ICMP
+ICMP.code=ICMP Código
+
+image.directory=Directorio de la imagen
+
+label.action.create.template.from.vm=Crear plantilla de VM
+label.action.create.template.from.volume=Crear plantilla de volumen
+
+message.vm.create.template.confirm=Crear plantilla de la máquina virtual se reiniciará automáticamente.
+
+label.action.manage.cluster=gestionar racimo
+message.action.manage.cluster=Por favor, confirme que desea para administrar el clúster.
+label.action.manage.cluster.processing=La gestión de clústeres ....
+
+label.action.unmanage.cluster=Unmanage racimo
+message.action.unmanage.cluster=Por favor, confirme que desea unmanage del clúster.
+label.action.unmanage.cluster.processing=Unmanaging Grupo ....
+
+# label.allocation.state=Allocation State
+managed.state=Estado logró
+
+label.default.use=Usar por defecto
+label.host.tags=etiquetas de la máquina
+
+label.cidr=CIDR
+label.cidr.list=fuente CIDR
+
+label.storage.tags=Etiquetas de almacenamiento
+
+label.redundant.router=enrutador redundante
+label.is.redundant.router=redundante
+
+force.delete=Fuerza Borrar
+force.delete.domain.warning=Advertencia\: Si elige esta opción, la supresión de todos los dominios secundarios y todas las cuentas asociadas y sus recursos.
+
+force.remove=Fuerza Retire
+force.remove.host.warning=Advertencia\: Si elige esta opción, CloudStack para detener la fuerza todas las máquinas virtuales en ejecución antes de retirar este host del clúster.
+
+force.stop=Grupo de Alto
+force.stop.instance.warning=Advertencia\: Obligar a una parada en este caso debería ser su última opción. Puede conducir a la pérdida de datos, así como un comportamiento incoherente del Estado de la máquina virtual.
+
+label.PreSetup=PreSetup
+label.SR.name = SR Nombre de etiqueta
+label.SharedMountPoint=SharedMountPoint 
+label.clvm=CLVM
+label.volgroup=Volume Group
+label.VMFS.datastore=VMFS de datos tienda
+
+label.network.device=De dispositivos de red
+label.add.network.device=Añadir dispositivo de red
+label.network.device.type=Tipo de red de dispositivos
+label.DHCP.server.type=Tipo de servidor DHCP
+label.Pxe.server.type=Tipo de servidor Pxe
+label.PING.storage.IP=PING almacenamiento IP
+label.PING.dir=PING Directorio
+label.TFTP.dir=Directorio de TFTP
+label.PING.CIFS.username=PING CIFS nombre de usuario
+label.PING.CIFS.password=PING CIFS contraseña
+label.CPU.cap=CPU Cap
+
+
+label.action.enable.zone=Habilitar la zona
+label.action.enable.zone.processing=Habilitación de zona .... 
+message.action.enable.zone=Por favor, confirme que desea habilitar esta zona. 
+label.action.disable.zone=Deshabilitar la zona 
+label.action.disable.zone.processing=Desactivación de la zona .... 
+message.action.disable.zone=Por favor, confirme que desea desactivar esta zona.
+
+label.action.enable.pod=Habilitar Pod 
+label.action.enable.pod.processing=Habilitación Pod .... 
+message.action.enable.pod=Por favor, confirme que desea habilitar esta vaina. 
+label.action.disable.pod=Deshabilitar Pod 
+label.action.disable.pod.processing=Deshabilitar Pod .... 
+message.action.disable.pod=Por favor, confirme que desea desactivar esta vaina.
+
+label.action.enable.cluster=Habilitar clúster 
+label.action.enable.cluster.processing=Habilitar clúster .... 
+message.action.enable.cluster=Por favor, confirme que desea habilitar este grupo.
+label.action.disable.cluster=Deshabilitar clúster 
+label.action.disable.cluster.processing=Desactivación de Cluster Server .... 
+message.action.disable.cluster=Por favor, confirme que desea desactivar este grupo.
+
+label.account.id=ID de la cuenta 
+label.account.name=Nombre de la cuenta 
+label.account.specific=específicas de la cuenta 
+label.account=Cuenta 
+label.accounts=Cuentas
+label.acquire.new.ip=adquirir nuevas IP
+label.show.ingress.rule=Mostrar la regla del ingreso
+label.hide.ingress.rule=Ocultar el artículo ingreso
+label.action.attach.disk.processing=disco Fijación .... 
+label.action.attach.disk=Conecte el disco 
+label.action.attach.iso.processing=Colocación de la norma ISO .... 
+label.action.attach.iso=Adjuntar ISO 
+label.action.cancel.maintenance.mode.processing=Cancelación del modo de mantenimiento .... 
+label.action.cancel.maintenance.mode=Cancelar modo de mantenimiento 
+label.action.change.password=Cambiar contraseña 
+label.action.change.service.processing=Cambio de servicio .... 
+label.action.change.service=Cambio de Servicio 
+label.action.copy.ISO.processing=hacer frente ISO .... 
+label.action.copy.ISO=Copia de la ISO 
+label.action.copy.template.processing=hacer frente plantilla .... 
+label.action.copy.template=Copia de plantilla 
+label.action.create.template.processing=Creación de plantillas .... 
+label.action.create.template=Crear plantilla 
+label.action.create.vm.processing=Creación de máquina virtual .... 
+label.action.create.vm=Crear VM 
+label.action.create.volume.processing=Crear volumen .... 
+label.action.create.volume=Crear volumen 
+label.action.delete.IP.range.processing=Eliminar Rango de IP .... 
+label.action.delete.IP.range=Eliminar Rango de IP 
+label.action.delete.ISO.processing=Eliminación de la norma ISO .... 
+label.action.delete.ISO=Eliminar ISO 
+label.action.delete.account.processing=Eliminar cuentas .... 
+label.action.delete.account=Eliminar cuenta 
+label.action.delete.cluster.processing=Borrar Grupo .... 
+label.action.delete.cluster=Borrar Grupo 
+label.action.delete.disk.offering.processing=Borrar disco ofrece .... 
+label.action.delete.disk.offering=Borrar disco Ofrenda 
+
+label.action.update.resource.count=Actualización de recursos Conde
+label.action.update.resource.count.processing=Actualización de Conde de recursos ....
+
+label.action.delete.domain=Eliminar de dominio 
+label.action.delete.domain.processing=Eliminación de dominio .... 
+
+label.action.delete.firewall.processing=Eliminación de firewall .... 
+label.action.delete.firewall=Eliminar servidor de seguridad 
+label.action.delete.ingress.rule.processing=Eliminación de ingreso regla .... 
+label.action.delete.ingress.rule=Borrar ingreso Regla 
+label.action.delete.load.balancer.processing=Eliminación del equilibrador de carga ....
+label.action.delete.load.balancer=Eliminar equilibrador de carga 
+# label.action.edit.network.processing=Editing Network....
+label.action.edit.network=Edición de redes
+label.action.delete.network.processing=Eliminación de red .... 
+label.action.delete.network=Eliminar Red 
+label.action.delete.pod.processing=Eliminar Pod .... 
+label.action.delete.pod=Eliminar Pod 
+label.action.delete.primary.storage.processing=Eliminación de almacenamiento primaria .... 
+label.action.delete.primary.storage=Almacenamiento primario Eliminar 
+label.action.delete.secondary.storage.processing=Eliminación de almacenamiento secundario .... 
+label.action.delete.secondary.storage=secundaria almacenamiento Eliminar 
+label.action.delete.security.group.processing=Eliminar grupo de seguridad .... 
+label.action.delete.security.group=Borrar Grupo de Seguridad 
+label.action.delete.service.offering.processing=Eliminación de Oferta de Servicio .... 
+label.action.delete.service.offering=Eliminar Oferta de Servicio 
+label.action.delete.snapshot.processing=Eliminar instantánea .... 
+label.action.delete.snapshot=Eliminar instantánea 
+label.action.delete.template.processing=Eliminar plantilla .... 
+label.action.delete.template=Eliminar plantilla 
+label.action.delete.user.processing=Eliminar usuario .... 
+label.action.delete.user=Eliminar usuario 
+label.action.delete.volume.processing=Eliminar volumen .... 
+label.action.delete.volume=Eliminar volumen 
+label.action.delete.zone.processing=Eliminación de la Zona .... 
+label.action.delete.zone=Eliminar Zona 
+label.action.destroy.instance.processing=Destrucción Instancia .... 
+label.action.destroy.instance=Destruye Instancia 
+label.action.destroy.systemvm.processing=Destrucción del sistema VM ....
+label.action.destroy.systemvm=destruir el sistema VM
+label.action.detach.disk.processing=Extracción disco .... 
+label.action.detach.disk=Separar disco 
+label.action.detach.iso.processing=Extracción ISO .... 
+label.action.detach.iso=Separar ISO 
+label.action.disable.account.processing=Deshabilitar cuenta .... 
+label.action.disable.account=Desactivar cuenta 
+label.action.disable.static.NAT.processing=Deshabilitar NAT estática .... 
+label.action.disable.static.NAT=Deshabilitar NAT estática 
+label.action.disable.user.processing=Desactivación de usuario .... 
+label.action.disable.user=Deshabilitar usuario 
+label.action.download.ISO=ISO Descargar 
+label.action.download.template=Descargar plantilla 
+label.action.download.volume.processing=Volumen Descargar .... 
+label.action.download.volume=Descargar Volumen 
+label.action.edit.ISO=Editar ISO 
+label.action.edit.account=Editar cuenta 
+label.action.edit.disk.offering=Editar disco Ofrenda 
+label.action.edit.domain=Editar Dominio 
+label.action.edit.global.setting=Editar Mundial Marco 
+label.action.edit.instance=Editar Instancia 
+label.action.edit.network.offering=Editar Red ofrece 
+label.action.edit.pod=Editar Pod 
+label.action.edit.primary.storage=Editar Almacenamiento primario 
+label.action.edit.resource.limits=Editar límites de recursos 
+label.action.edit.service.offering=Editar Oferta de Servicio 
+label.action.edit.template=Editar plantilla 
+label.action.edit.user=Editar usuario 
+label.action.edit.zone=Edición Zona 
+label.action.enable.account.processing=cuenta de Habilitación .... 
+label.action.enable.account=Habilitar cuenta 
+label.action.enable.maintenance.mode.processing=Habilitación del modo de mantenimiento .... 
+label.action.enable.maintenance.mode=Activar el modo de mantenimiento 
+label.action.enable.static.NAT.processing=Habilitar NAT estática .... 
+label.action.enable.static.NAT=Habilitar NAT estática 
+label.action.enable.user.processing=Habilitación del usuario .... 
+label.action.enable.user=usuario Activar 
+label.action.force.reconnect.processing=Reconectando .... 
+label.action.force.reconnect=Fuerza Vuelva a conectar 
+label.action.generate.keys.processing=Generar claves .... 
+label.action.generate.keys=Generar Claves 
+label.action.lock.account.processing=Bloqueo de cuenta .... 
+label.action.lock.account=Bloqueo de cuenta 
+label.action.migrate.instance=Migrar Instancia
+label.action.migrate.instance.processing=Migrar Instancia ....
+label.action.reboot.instance.processing=Reiniciar Instancia .... 
+label.action.reboot.instance=Reiniciar Instancia 
+label.action.reboot.router.processing=Reiniciar router .... 
+label.action.reboot.router=Reiniciar router 
+label.action.reboot.systemvm.processing=reinicio del sistema VM .... 
+label.action.reboot.systemvm=Reiniciar sistema VM 
+label.action.recurring.snapshot=recurrente instantáneas 
+label.action.release.ip.processing=Liberar IP .... 
+label.action.release.ip=estreno IP 
+label.action.remove.host.processing=Extracción de host .... 
+label.action.remove.host=Quitar host 
+label.action.reset.password.processing=Restablecimiento de la contraseña .... 
+label.action.reset.password=Restablecer contraseña 
+label.action.resource.limits=Recursos límites 
+label.action.restore.instance.processing=Restaurar Instancia .... 
+label.action.restore.instance=Restaurar Instancia 
+label.action.start.instance.processing=A partir Instancia .... 
+label.action.start.instance=Iniciar Instancia 
+label.action.start.router.processing=A partir del router .... 
+label.action.start.router=inicio del router 
+label.action.start.systemvm.processing=A partir del sistema VM .... 
+label.action.start.systemvm=Inicio del sistema VM 
+label.action.stop.instance.processing=Detener Instancia .... 
+label.action.stop.instance=Detener Instancia 
+label.action.stop.router.processing=Detener router .... 
+label.action.stop.router=Detener router 
+label.action.stop.systemvm.processing=Detener sistema VM .... 
+label.action.stop.systemvm=parada del sistema VM 
+label.action.take.snapshot.processing=Tomar instantáneas .... 
+label.action.take.snapshot=Tomar instantánea 
+label.action.update.OS.preference.processing=Actualización de sistema operativo preferencia .... 
+label.action.update.OS.preference=Actualizar OS Preferencia 
+label.actions=Acciones 
+label.active.sessions=Sesiones activas 
+label.add.account=Añadir cuenta 
+label.add.by.cidr=Añadir Por CIDR 
+label.add.by.group=Añadir Por el Grupo de 
+label.add.cluster=Añadir Grupo 
+label.add.direct.iprange=Añadir Direct IP Gama 
+label.add.disk.offering=Añadir disco Ofrenda 
+label.add.domain=Agregar dominio 
+label.add.firewall=Agregar Servidor de seguridad 
+label.add.host=Agregar host 
+label.add.ingress.rule=Añadir regla del ingreso 
+label.add.ip.range=Añadir Rango de IP 
+label.add.load.balancer=Añadir equilibrador de carga 
+label.add.more=Añadir más 
+label.add.network=Agregar sitios de red 
+label.add.pod=Añadir Pod 
+label.add.primary.storage=Añadir Almacenamiento primario 
+label.add.secondary.storage=Añadir secundaria almacenamiento 
+label.add.security.group=Agregar grupo de seguridad 
+label.add.service.offering=Añadir Servicio de Oferta 
+label.add.template=Añadir plantilla 
+label.add.user=Agregar usuario 
+label.add.vlan=Añadir VLAN 
+label.add.volume=Añadir volumen 
+label.add.zone=Añadir Zona 
+label.add=Agregar 
+label.adding.cluster=Adición de clúster 
+label.adding.failed=No se pudo agregar 
+label.adding.pod=Agregar Pod 
+label.adding.processing=Añadir .... 
+label.adding.succeeded=Agregar Sucesor 
+label.adding.user=Agregar usuario 
+label.adding.zone=Agregar la zona 
+label.adding=Agregar 
+label.additional.networks=Redes adicional 
+label.admin.accounts=Administrador de Cuentas 
+label.admin=Admin 
+label.advanced.mode=Modo avanzado 
+label.advanced.search=Búsqueda Avanzada 
+label.advanced=Avanzado 
+label.alert=Alerta
+label.algorithm=Algoritmo 
+label.allocated=Asignados 
+label.api.key=clave de API 
+label.assign.to.load.balancer=instancia de Asignación de equilibrador de carga 
+label.assign=Asignar 
+label.associated.network.id=ID de red asociados 
+label.attached.iso=adjunta ISO 
+label.availability.zone=Disponibilidad de la zona 
+label.availability=Disponibilidad 
+label.available.public.ips=Disponible direcciones IP públicas 
+label.available=Disponible
+label.back=Volver 
+label.basic.mode=Modo básico 
+label.bootable=arranque 
+label.broadcast.domain.type=Tipo de dominio de difusión 
+label.by.account=Por Cuenta
+label.by.availability=Por Disponibilidad 
+label.by.domain=Por dominio
+label.by.end.date=Por Fecha de finalización
+label.by.level=por Nivel 
+label.by.pod=Por Pod
+label.by.role=por función 
+label.by.start.date=Por Fecha de inicio
+label.by.state=Por Estado 
+label.by.traffic.type=Por tipo de tráfico 
+label.by.type.id=Por tipo de identificación
+label.by.type=Por tipo 
+label.by.zone=Por Zona
+label.bytes.received=Bytes recibidos 
+label.bytes.sent=Bytes enviados 
+label.cancel=Cancelar 
+label.certificate=Certificado 
+label.privatekey=PKCS\#8 la clave privada
+label.domain.suffix=DNS sufijo de dominio (es decir, xyz.com)
+label.character=Personaje 
+label.cidr.account=CIDR o de cuenta / Grupo de Seguridad 
+label.close=Cerrar 
+label.cloud.console=Cloud Management Console 
+label.cloud.managed=Cloud.com Gestionado 
+label.cluster.type=Tipo de Cluster Server 
+label.cluster=Grupo 
+label.code=Código 
+label.confirmation=Confirmation
+label.cpu.allocated.for.VMs=CPU asignado para máquinas virtuales
+label.cpu.allocated=CPU asignado
+label.cpu.utilized=CPU Utilizado
+label.cpu=CPU 
+label.created=creación 
+label.cross.zones=Cruz Zonas 
+label.custom.disk.size=Personal Disk Size 
+label.daily=diario 
+label.data.disk.offering=Datos Disco Offering
+label.date=Fecha 
+label.day.of.month=Día del mes 
+label.day.of.week=día de la semana 
+label.delete=Eliminar 
+label.deleting.failed=No se pudo eliminar 
+label.deleting.processing=Eliminar .... 
+label.description=Descripción 
+label.detaching.disk=Extracción del disco 
+label.details=Detalles 
+label.device.id=ID de dispositivo 
+label.disabled=personas de movilidad reducida 
+label.disabling.vpn.access=Desactivación de VPN de acceso 
+label.disk.allocated=disco asignado 
+label.disk.offering=disco Ofrenda 
+label.disk.size.gb=tamaño de disco (en GB) 
+label.disk.size=tamaño de disco 
+label.disk.total=disco Total 
+label.disk.volume=volumen de disco 
+label.display.text=visualización de texto 
+label.dns.1=DNS 1 
+label.dns.2=DNS 2 
+label.domain.admin=Administrador de dominio 
+label.domain.id=ID de dominio 
+label.domain.name=Nombre de dominio 
+label.domain=dominio 
+label.double.quotes.are.not.allowed=comillas dobles no se permite 
+label.download.progress=Progreso de la descarga
+label.edit=Editar 
+label.email=correo electrónico 
+label.enabling.vpn.access=Habilitación de Acceso VPN 
+label.enabling.vpn=Habilitación VPN 
+label.end.port=Puerto final 
+label.endpoint.or.operation=punto final o de Operación 
+label.error.code=Código de error 
+label.error=Error 
+label.esx.host=ESX / ESXi anfitrión 
+label.example=Ejemplo 
+label.failed=Error 
+label.featured=destacados 
+label.firewall=Servidor de seguridad 
+label.first.name=Nombre 
+label.format=Formato 
+label.friday=Viernes 
+label.full=completo
+label.gateway=puerta de enlace 
+label.general.alerts=General de Alertas 
+label.generating.url=Generar URL 
+label.go.step.2=Ir al paso 2 
+label.go.step.3=Ir al paso 3 
+label.go.step.4=Ir al paso 4 
+label.go.step.5=Ir al paso 5 
+label.group.optional=Grupo (Opcional) 
+label.group=Grupo 
+label.guest.cidr=Habitación CIDR 
+label.guest.gateway=Habitación Gateway 
+label.guest.ip.range=Habitación Rango de IP 
+label.guest.ip=Habitación dirección IP 
+label.guest.netmask=Habitación máscara de red 
+label.ha.enabled=HA Activado 
+label.help=Ayuda 
+label.host.alerts=Host Alertas 
+label.host.name=nombre de host 
+label.host=Ejércitos  
+label.hosts=Ejércitos 
+label.hourly=por hora 
+label.hypervisor.type=Tipo Hypervisor 
+label.hypervisor=Hypervisor 
+label.id=ID 
+label.info=Información 
+label.ingress.rule=ingreso Regla 
+label.initiated.by=Iniciado por 
+label.instance.limits=Instancia Límites 
+label.instance.name=Nombre de instancia 
+label.instance=Instancia 
+label.instances=Instancias 
+label.internal.dns.1=DNS interno una 
+label.internal.dns.2=DNS interno 2 
+label.interval.type=Tipo de intervalo 
+label.invalid.integer=entero no válido 
+label.invalid.number=Número no válido 
+label.ip.address=Dirección IP 
+label.ip.allocations=IP asignaciones 
+label.ip.limits=IP pública Límites 
+label.ip.or.fqdn=IP o FQDN 
+label.ip.range=Rango de IP 
+label.ip=IP 
+label.ips=IP 
+label.is.default=Es por defecto 
+label.is.shared=es compartido 
+label.is.system=es el Sistema 
+label.iscsi=iSCSI 
+label.iso.boot=ISO de arranque 
+label.iso=ISO 
+label.isolation.mode=modo de aislamiento
+label.keep=Mantener 
+label.lang.chinese=Chino (simplificado) 
+label.lang.english=Inglés 
+label.lang.japanese=japonés 
+label.lang.spanish=Español 
+# label.lang.russian=Russian
+# label.lang.french=French
+# label.lang.brportugese=Brazilian Portugese
+label.last.disconnected=Última Desconectado 
+label.last.name=Apellido 
+label.level=Nivel 
+# label.linklocal.ip=Link Local IP Adddress
+label.load.balancer=equilibrador de carga 
+label.loading=Carga 
+label.local=local 
+# label.local.storage.enabled=Local storage enabled
+label.login=Login 
+label.logout=Cerrar sesión 
+label.lun=LUN 
+label.manage=Administrar 
+label.maximum=máximo 
+label.memory.allocated=memoria asignada 
+label.memory.total=Total de memoria 
+label.memory.used=memoria usada 
+label.memory=memoria (en MB) 
+label.menu.accounts=Cuentas
+label.menu.alerts=Alertas 
+label.menu.all.accounts=Todas las cuentas 
+label.menu.all.instances=todas las instancias 
+label.menu.community.isos=Comunidad ISOs 
+label.menu.community.templates=plantillas de la comunidad 
+label.menu.configuration=Configuración 
+label.menu.dashboard=Interfaz 
+label.menu.destroyed.instances=Destruir instancias 
+label.menu.disk.offerings=disco ofertas 
+label.menu.domains=dominio 
+label.menu.events=Eventos 
+label.menu.featured.isos=destacados ISO 
+label.menu.featured.templates=destacados plantillas 
+label.menu.global.settings=Configuración global 
+label.menu.instances=Instancias 
+label.menu.ipaddresses=Direcciones IP 
+label.menu.isos=ISO 
+label.menu.my.accounts=Mis cuentas 
+label.menu.my.instances=Mi instancias 
+label.menu.my.isos=Mi ISOs 
+label.menu.my.templates=Mis plantillas 
+label.menu.network.offerings=Red de ofertas 
+label.menu.network=Red 
+label.menu.physical.resources=Recursos Físicos 
+label.menu.running.instances=Ejecución de instancias 
+label.menu.security.groups=Grupos de seguridad 
+label.menu.service.offerings=Ofertas de Servicios 
+label.menu.snapshots=instantáneas 
+label.menu.stopped.instances=Detenido instancias 
+label.menu.storage=Almacenamiento 
+label.menu.system.vms=Sistema de máquinas virtuales 
+label.menu.system=Sistema 
+label.menu.templates=plantillas 
+label.menu.virtual.appliances=Virtual Appliances 
+label.menu.virtual.resources=Virtual de Recursos 
+label.menu.volumes=Volúmenes 
+label.migrate.instance.to=Migración de ejemplo para
+label.minimum=Mínimo 
+label.minute.past.hour=Minuto (s) después de la hora 
+label.monday=lunes 
+label.monthly=mensual 
+label.more.templates=plantillas \= Más 
+label.my.account=Mi Cuenta 
+label.name.optional=Nombre (Opcional) 
+label.name=Nombre 
+label.netmask=máscara de red 
+label.network.desc=Red de Desc 
+label.network.domain=red de dominio
+label.network.id=ID de red 
+label.network.name=Nombre de red 
+label.network.offering.display.text=Red ofrece visualización de texto 
+label.network.offering.id=Red ofrece ID 
+label.network.offering.name=Red ofrece Nombre 
+label.network.offering=Red ofrece 
+label.network.rate=Tasa de Red 
+# label.network.rate.megabytes=Network Rate (Mb/s)
+label.network.read=Leer de la red 
+label.network.type=Tipo de red 
+label.network.write=Escribir en la red 
+label.network=Red 
+label.new.password=Nueva contraseña 
+label.next=Siguiente 
+label.nfs.server=servidor NFS 
+label.nfs.storage=NFS Almacenamiento 
+label.nfs=NFS 
+label.nics=NIC 
+label.no.actions=No Acciones disponibles 
+label.no.alerts=No alertas recientes 
+label.no.errors=No recientes errores 
+label.no.isos=No ISOs disponibles 
+label.no.items=No artículos disponibles 
+label.no.security.groups=No hay grupos disponibles de Seguridad 
+label.no.thanks=No, gracias 
+label.no=No 
+label.none=Ninguno
+label.not.found=No se ha encontrado
+label.num.cpu.cores=número de núcleos de CPU 
+label.numretries=Número de reintentos
+label.offer.ha=Oferta HA 
+label.optional=Opcional 
+label.os.preference=OS Preferencia 
+label.os.type=tipo de Sistema Operativo 
+label.owned.public.ips=propiedad pública Direcciones IP 
+label.owner.account=titular de la cuenta 
+label.owner.domain=Propietario de Dominio
+label.parent.domain=Padres de dominio 
+label.password.enabled=Contraseña Activado 
+label.password=Contraseña 
+label.path=Ruta 
+label.please.wait=Por favor espere 
+label.pod=Pod 
+label.port.forwarding=Port Forwarding 
+label.port.range=rango de puertos 
+label.prev=Anterior 
+label.primary.allocated=primaria asignado de almacenamiento 
+label.primary.network=Red Primaria 
+label.primary.storage=Almacenamiento Primario 
+label.primary.used=Primaria Almacenado 
+label.private.interface=Interfaz privada 
+label.private.ip.range=IP privada Gama 
+label.private.ip=dirección IP privada 
+label.private.ips=direcciones IP privadas 
+label.private.port=Puerto privado 
+label.private.zone=Zona Privada 
+label.protocol=Protocolo 
+label.public.interface=interfaz pública 
+label.public.ip=dirección IP pública 
+label.public.ips=direcciones IP públicas 
+label.public.port=Puerto Público 
+label.public.zone=Zona Pública 
+label.public=Pública 
+label.recent.errors=recientes errores 
+label.refresh=Actualizar 
+label.related=relacionados 
+label.remove.from.load.balancer=ejemplo Eliminación de equilibrador de carga 
+label.removing.user=Eliminar usuario 
+label.required=Requerido 
+label.reserved.system.ip=Reservados sistema de PI 
+label.resource.limits=Límites de Recursos 
+label.resource=Recursos 
+label.resources=Recursos 
+label.role=Papel 
+label.root.disk.offering=Root Disco Offering
+label.running.vms=Ejecución de máquinas virtuales 
+label.saturday=sábado 
+label.save=Guardar 
+label.saving.processing=ahorro .... 
+label.scope=Alcance 
+label.search=Buscar 
+label.secondary.storage=Almacenamiento secundario 
+label.secondary.used=Secundaria Almacenado 
+label.secret.key=clave secreta 
+label.security.group.name=Nombre de grupo de seguridad 
+label.security.group=Grupo de Seguridad 
+label.security.groups.enabled=Los grupos de seguridad habilitado
+label.security.groups=Grupos de seguridad 
+label.sent=Enviados 
+label.server=Servidor 
+label.service.offering=Oferta de Servicio 
+# label.system.service.offering=System Service Offering
+label.session.expired=Session Caducado
+label.shared=compartidas 
+label.size=Tamaño 
+label.snapshot.limits=instantáneas Límites 
+label.snapshot.name=Nombre de instantáneas 
+label.snapshot.s=Instantánea (s) 
+label.snapshot.schedule=Lista de instantáneas 
+label.snapshot=Instantánea 
+label.snapshots=instantáneas 
+label.source.nat=NAT Fuente 
+label.specify.vlan=Especifique VLAN 
+label.start.port=Iniciar Puerto 
+label.state=Estado 
+label.static.nat.to=estático NAT para 
+label.static.nat=NAT estática 
+label.statistics=Estadísticas 
+label.status=Estado 
+label.step.1.title=Paso 1\: <strong> Seleccione una plantilla </strong> 
+label.step.1=Paso 1 
+label.step.2.title=Paso 2\: <strong> Oferta de Servicio </strong> 
+label.step.2=Paso 2 
+label.step.3.title=Paso 3\: <strong id\="step3_label"> Seleccione un disco Ofrenda </strong> 
+label.step.3=Paso 3 
+label.step.4.title=Paso 4\: <strong> Red </strong> 
+label.step.4=Paso 4 
+label.step.5.title=Paso 5\: Revisión <strong> </strong> 
+label.step.5=Paso 5 
+label.stopped.vms=Detenido máquinas virtuales 
+label.storage.type=Tipo de almacenamiento 
+label.storage=Almacenamiento 
+label.submit=Enviar 
+label.submitted.by=[Enviado por\: <span id\="submitted_by"> </span>] 
+label.succeeded=Sucesor 
+label.sunday=domingo 
+label.system.capacity=Capacidad de todo el sistema 
+label.system.vm.type=Tipo de sistema VM 
+label.system.vm=Sistema de VM 
+label.system.vms=Sistema de máquinas virtuales 
+label.tagged=etiqueta 
+label.tags=Etiquetas 
+label.target.iqn=Objetivo IQN 
+label.template.limits=Plantilla Límites 
+label.template=plantilla 
+label.theme.default=Tema Por Defecto 
+label.theme.grey=Personal - Gris
+label.theme.lightblue=Personal - Azul
+label.thursday=Jueves 
+label.time.zone=Zona horaria 
+label.time=Tiempo 
+label.timeout.in.second = Tiempo de espera (segundos)
+label.timezone=Zona horaria 
+label.total.cpu=Total CPU
+label.total.vms=Total de máquinas virtuales 
+label.traffic.type=Tipo de Tráfico 
+label.tuesday=martes 
+label.type.id=Tipo de identificación 
+label.type=Tipo 
+label.unavailable=no disponible 
+label.unlimited=Unlimited
+label.untagged=sin etiquetar 
+# label.update.ssl.cert= SSL Certificate
+# label.update.ssl= SSL Certificate
+label.updating=Actualizar 
+label.url=URL
+label.usage.interface=Interfaz de uso 
+label.used=Usado 
+label.user=Usuario 
+label.username=Nombre de usuario 
+label.users=usuario 
+label.value=Valor 
+label.vcenter.cluster=vCenter clúster 
+label.vcenter.datacenter=vCenter de centros de datos 
+label.vcenter.datastore=vCenter almacén de datos 
+label.vcenter.host=vCenter anfitrión 
+label.vcenter.password=vCenter Contraseña 
+label.vcenter.username=vCenter Nombre de usuario 
+label.version=Versión 
+label.virtual.appliance=Virtual Appliance 
+label.virtual.appliances=Virtual Appliances 
+label.virtual.network=Red Virtual 
+label.vlan.id=ID de VLAN 
+label.vlan.range=VLAN Gama 
+label.vm.add=Añadir Instancia 
+label.vm.destroy=Destroy 
+label.vm.reboot=Reiniciar 
+label.vm.start=Inicio 
+label.vm.stop=Detener 
+label.vmfs=VMFS 
+label.vms=VM 
+label.volume.limits=límites de volumen 
+label.volume.name=Nombre de Volumen 
+label.volume=Volumen 
+label.volumes=Volúmenes 
+label.vsphere.managed=Gestionado \= vSphere 
+label.waiting=Esperando 
+label.warn=Advertir 
+label.wednesday=miércoles 
+label.weekly=Semanal 
+label.welcome.cloud.console=Bienvenido a la consola de administración 
+label.welcome=Bienvenido 
+label.yes=Sí 
+label.zone.id=Zona de identificación 
+label.zone.step.1.title=Paso 1\: <strong> Seleccione una red </strong> 
+label.zone.step.2.title=Paso 2\: <strong>Añadir una zona </strong> 
+label.zone.step.3.title=Paso 3\: <strong>Añadir una vaina </strong> 
+label.zone.step.4.title=Paso 4\: <strong>Añadir un rango de IP </strong> 
+label.zone.wide=Zona para todo el 
+label.zone=Zona
+
+#Messages
+message.acquire.public.ip=Por favor seleccione una zona de la que desea adquirir su nueva IP. 
+message.action.cancel.maintenance.mode=Por favor, confirme que desea cancelar el mantenimiento 
+message.action.cancel.maintenance=Su acogida ha sido cancelado con éxito para el mantenimiento. Este proceso puede tardar hasta varios minutos.
+message.action.delete.ISO.for.all.zones=La ISO es utilizado por todas las zonas. Por favor, confirme que desea eliminar de todas las zonas. 
+message.action.delete.ISO=Por favor, confirme que desea eliminar la norma ISO 
+message.action.delete.cluster=Por favor, confirme que desea eliminar del clúster 
+message.action.delete.disk.offering=Por favor, confirme que desea eliminar ofreciendo disco 
+message.action.delete.domain=Por favor, confirme que desea eliminar de dominio 
+message.action.delete.external.firewall=Por favor, confirme que desea quitar este servidor de seguridad externo. Advertencia\: Si usted está planeando volver a agregar el servidor de seguridad externo mismo, debe restablecer los datos de uso en el dispositivo.
+message.action.delete.external.load.balancer=Por favor, confirme que desea eliminar este equilibrador de carga externa. Advertencia\: Si usted está planeando volver a agregar la misma equilibrador de carga externo, debe restablecer los datos de uso en el dispositivo.
+message.action.delete.ingress.rule=Por favor, confirme que desea eliminar la regla de ingreso 
+message.action.delete.network=Por favor, confirme que desea eliminar de la red 
+message.action.delete.pod=Por favor, confirme que desea eliminar de la vaina 
+message.action.delete.primary.storage=Por favor, confirme que desea eliminar el almacenamiento primario 
+message.action.delete.secondary.storage=Por favor, confirme que desea eliminar de almacenamiento secundario 
+message.action.delete.security.group=Por favor, confirme que desea eliminar el grupo de seguridad 
+message.action.delete.service.offering=Por favor, confirme que desea eliminar oferta de servicios 
+message.action.delete.snapshot=Por favor, confirme que desea eliminar instantáneas
+message.action.delete.template.for.all.zones=La plantilla es utilizada por todas las zonas. Por favor, confirme que desea eliminar de todas las zonas. 
+message.action.delete.template=Por favor, confirme que desea eliminar la plantilla 
+message.action.delete.volume=Por favor, confirme que desea eliminar el volumen 
+message.action.delete.zone=Por favor, confirme que desea eliminar la zona 
+message.action.destroy.instance=Por favor, confirme que desea destruir ejemplo 
+message.action.destroy.systemvm=Por favor, confirme que desea destruir la máquina virtual del sistema.
+message.action.disable.static.NAT=Por favor, confirme que desea desactivar NAT estática 
+message.action.enable.maintenance=Su acogida ha sido preparado con éxito para el mantenimiento. Este proceso puede tardar hasta varios minutos o más dependiendo de cómo las máquinas virtuales se encuentran actualmente en este servidor.
+message.action.force.reconnect=Por favor, confirme que desea forzar una reconexión para el anfitrión 
+message.action.host.enable.maintenance.mode=mode \= mantenimiento de Habilitación provocará una migración en vivo de todas las instancias que se ejecutan en el sistema para cualquier máquina disponible. 
+message.action.instance.reset.password=Por favor, confirme que desea cambiar la contraseña de root para esta máquina virtual.
+message.action.primarystorage.enable.maintenance.mode=Advertencia\: colocar el almacenamiento principal en modo de mantenimiento hará que todas las máquinas virtuales utilizando volúmenes de que sea detenido. ¿Desea continuar? 
+message.action.reboot.instance=Por favor, confirme que desea reiniciar el ejemplo 
+message.action.reboot.systemvm=Por favor, confirme que desea reiniciar el sistema VM 
+message.action.release.ip=Por favor, confirme que desea liberar IP 
+# message.action.remove.host=Please confirm that you want to remove this host.
+message.action.restore.instance=Por favor, confirme que desea restaurar ejemplo 
+message.action.start.instance=Por favor, confirme que desea iniciar la instancia 
+message.action.start.router=Por favor, confirme que desea iniciar router 
+message.action.start.systemvm=Por favor, confirme que desea iniciar el sistema VM 
+message.action.stop.instance=Por favor, confirme que desea detener la instancia 
+message.action.stop.systemvm=Por favor, confirme que desea detener sistema VM 
+message.action.take.snapshot=Por favor, confirme que desea tomar instantáneas 
+message.add.cluster.zone=Añadir un hipervisor administradas por clúster de <b> zona <span id\="zone_name"> </span> </b> 
+message.add.cluster=Añadir un hipervisor administradas por clúster de <b> zona <span id\="zone_name"> </span> </b>, la consola de <b> <span id\="pod_name"> </span> </b> 
+message.add.disk.offering=Por favor, especifique los parámetros siguientes para agregar un nuevo disco que ofrece 
+message.add.firewall=Añadir un servidor de seguridad a la zona 
+message.add.host=Por favor, especifique los parámetros siguientes para agregar un nuevo host 
+message.add.ip.range.direct.network=Añadir un rango de IP para dirigir <b> red <span id\="directnetwork_name"> </span> </b> en la zona <b> <span id \= "zone_name" > </span> </b> 
+message.add.ip.range.to.pod=<p> Añadir un rango de IP de la vaina\: <b><span id\="pod_name_label"> </span> </b> </p> 
+message.add.ip.range=Añadir un rango de IP a la red pública en la zona 
+message.add.load.balancer=Añadir un equilibrador de carga a la zona 
+message.add.network=Agregar una nueva red para la zona\: <b><span id\="zone_name"> </span> </b> 
+message.add.pod=Agregar una vaina nueva <b> zona <span id\="add_pod_zone_name"> </span> </b> 
+message.add.primary.storage=Agregar una nueva almacenamiento primario para <b> zona <span id\="zone_name"> </span> </b>, la consola de <b> <span id\="pod_name"> </span> </b> 
+message.add.primary=Por favor, especifique los parámetros siguientes para agregar un nuevo almacenamiento primario 
+message.add.secondary.storage=Añadir un nuevo almacenamiento de <b> zona <span id\="zone_name"> </span> </b> 
+message.add.service.offering=Por favor, rellene los siguientes datos para agregar una nueva oferta de servicio. 
+message.add.template=Por favor ingrese los siguientes datos para crear la nueva plantilla 
+message.add.volume=Por favor, rellene los siguientes datos para agregar un nuevo volumen. 
+message.additional.networks.desc=Por favor seleccione de red adicionales (s) que la instancia virtual estará conectado. 
+message.advanced.mode.desc=Seleccione este modelo de red si desea habilitar soporte VLAN. Este modelo de red proporciona la máxima flexibilidad al permitir a los administradores proporcionar ofertas personalizadas de la red como el suministro de firewall, VPN, o el apoyo equilibrador de carga, así como permitir vs directa de redes virtuales. 
+message.advanced.security.group=Elija esta opción si desea utilizar grupos de seguridad para proporcionar resultados de aislamiento VM.
+message.advanced.virtual=Elija esta opción si desea utilizar VLAN toda la zona para proporcionar el aislamiento VM invitado.
+message.allow.vpn.access=Por favor, introduzca un nombre de usuario y la contraseña del usuario que desea permitir el acceso de VPN. 
+message.attach.iso.confirm=Por favor, confirme que desea conectar el ISO a la instancia virtual 
+message.attach.volume=Por favor, rellene los siguientes datos para fijar un nuevo volumen. Si está colocando un volumen de disco a una máquina virtual de Windows basado, usted tendrá que reiniciar la instancia para ver el disco adjunto. 
+message.basic.mode.desc=Seleccione este modelo de red si lo haces * <b> no <u> </u> * </b> desea habilitar cualquier soporte VLAN. Todas las instancias virtuales creados en virtud de este modelo de red se le asignará una dirección IP directamente desde la red y grupos de seguridad se utilizan para proporcionar la seguridad y la segregación. 
+message.change.offering.confirm=Por favor, confirme que desea cambiar la oferta de servicio de la instancia virtual. 
+message.copy.iso.confirm=Por favor, confirme que desea copiar el ISO a 
+message.copy.template=Copia plantilla <b id\="copy_template_name_text"> XXX </b> de la zona <b id\="copy_template_source_zone_text"> </b> 
+message.create.template.vm=Crear VM de la plantilla <b id\="p_name"> </b> 
+message.create.template.volume=Por favor, especifique la siguiente información antes de crear una plantilla de su volumen de disco\: <b> <span id\="volume_name"> </span> </b>. Creación de la plantilla puede oscilar entre varios minutos más, dependiendo del tamaño del volumen. 
+message.delete.account=Por favor, confirme que desea eliminar esta cuenta. 
+message.detach.iso.confirm=Por favor, confirme que desea quitar el ISO de la instancia virtual 
+message.disable.account=Por favor, confirme que desea deshabilitar esta cuenta. Al deshabilitar la cuenta, todos los usuarios de esta cuenta ya no tienen acceso a los recursos de su nube. Todas las máquinas virtuales en ejecución se cierre inmediatamente. 
+message.disable.vpn.access=Por favor, confirme que desea desactivar VPN de acceso.
+message.download.ISO=Por favor, haga clic <a href\="\#">00000</a> para descargar la ISO    
+message.download.template=Por favor, haga clic <a href\="\#">00000</a> para descargar la plantilla
+message.download.volume=Por favor, haga clic <a href\="\#">00000</a> para bajar el volumen
+message.edit.confirm=Por favor confirmar los cambios antes de hacer clic en "Guardar" 
+message.edit.limits=Por favor, especifique los límites de los recursos siguientes. A "-1" indica que no hay límite a la cantidad de los recursos de crear. 
+message.enable.account=Por favor, confirme que desea habilitar esta cuenta. 
+message.enable.vpn.access=VPN \= está desactivado para esta dirección IP. ¿Te gustaría que permitan el acceso VPN? 
+message.enabled.vpn.ip.sec=La clave pre-compartida IPSec es 
+message.enabled.vpn=Su acceso a la VPN está habilitado y se puede acceder a través de la IP 
+message.launch.vm.on.private.network=¿Desea iniciar su ejemplo en su propia red privada dedicada?
+message.lock.account=Por favor, confirme que desea bloquear esta cuenta. Al bloquear la cuenta, todos los usuarios de esta cuenta ya no será capaz de gestionar sus recursos de la nube. Los recursos existentes todavía se puede acceder. 
+message.migrate.instance.confirm=Por favor, confirme el anfitrión desea migrar la instancia virtual.
+message.new.user=Especifique lo siguiente para agregar un nuevo usuario a la cuenta 
+message.no.network.support.configuration.not.true=Usted no tiene ninguna zona que ha permitido a grupo de seguridad. Por lo tanto, no hay funciones de red adicionales. Por favor, continúe con el paso 5.
+message.no.network.support=El hipervisor seleccionado, vSphere, no tiene funciones de red adicionales. Por favor, continúe con el paso 5. 
+message.number.clusters=<h2> <span> \# de </span> Grupos </h2> 
+message.number.hosts=<h2> <span> \# de </span> Anfitrión </h2> 
+message.number.pods=<h2> <span> \# de </span> Las vainas </h2> 
+message.number.storage=<h2> <span> \# de </span> Almacenamiento primario </h2> 
+message.number.zones=<h2> <span> \# de </span> Zonas </h2> 
+message.remove.vpn.access=Por favor, confirme que desea eliminar el acceso VPN desde el siguiente usuario 
+message.restart.mgmt.server=Por favor, reinicie el servidor de administración (s) para la nueva configuración surta efecto. 
+# message.restart.mgmt.usage.server=Please restart your management server(s) and usage server(s) for your new settings to take effect.
+message.security.group.usage=(Uso <strong> pulse Ctrl </strong> para seleccionar todos los grupos de seguridad se aplica) 
+message.snapshot.schedule=Puede horarios de configuración recurrente instantáneas mediante la selección de las opciones disponibles a continuación y la aplicación de su preferencia política 
+message.step.1.continue=Por favor seleccione una plantilla o ISO para continuar 
+message.step.1.desc=Por favor seleccione una plantilla para la instancia virtual. También puede optar por seleccionar una plantilla en blanco desde el que puede ser una imagen ISO instalado en. 
+message.step.2.continue=Por favor seleccione una oferta de servicio para continuar 
+message.step.2.desc=
+message.step.3.continue=Por favor seleccione una oferta en disco para continuar 
+message.step.3.desc=
+message.step.4.continue=Por favor seleccione al menos una red social para continuar
+message.step.4.desc=Por favor, seleccione la red primaria que la instancia virtual estará conectado. 
+message.update.os.preference=Por favor seleccione un sistema operativo de preferencia para este equipo. Todas las instancias virtuales con preferencias similares serán los primeros asignados a este equipo antes de elegir otro. 
+message.update.ssl=Por favor, envíe una nueva X.509 compatible con certificado SSL que se actualizará a cada instancia virtual de la consola del servidor proxy\: 
+message.virtual.network.desc=Una red dedicada virtualizados para su cuenta. El dominio de difusión está contenida dentro de una VLAN y todos los acceso a la red p

<TRUNCATED>