You are viewing a plain text version of this content. The canonical link for it is here.
Posted to log4j-user@logging.apache.org by Mihail K <si...@gmail.com> on 2011/08/10 13:18:10 UTC
VFSLogFilePatternReceiver not tailing over sftp
Hello,
Chainsaw is loading the remote log file but no new events are added unless I
manually restart the receiver. Is the tailing feature implemented for
VFSLogFilePatternReceiver? Here's my setup:
- apache-chainsaw-2.1.0-SNAPSHOT from people.apache.org/~sdeboy/
- commons-vfs-1.1-SNAPSHOT.jar
- receiver config:
<plugin name="TansrvReleaseLogFileReceiver"
class="org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver">
<param name="fileURL"
value="sftp://****:*****@78.90.xx.xx///var/opt/tansrv/log/tansrv.log"/>
<param name="logFormat" value="TIMESTAMP LEVEL LOGGER MESSAGE"/>
<param name="tailing" value="true"/>
<param name="autoReconnect" value="true"/>
</plugin>
Here is VFSLogFilePatternReceiver's chainsaw log output:
8 - 2011/08/10 13:01:57 - - INFO -
org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - attempting to load
file: sftp://username:password@78.90.xx.xx///var/opt/tansrv/log/tansrv.log -
- Thread-5 - - org.apache.log4j.spi.Log4JULogger - info -
Log4JULogger.java - 0 - 105 - chainsaw - log
38 - 2011/08/10 13:02:04 - - DEBUG -
org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - regexp is
(\S+-\S+-\S+ \S+:\S+:\S+,\S+)[ ]+(\S*\s*?)[ ]+(\S*\s*?)[ ]+(.*) - -
Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java
- 7610 - 59 - chainsaw - log
39 - 2011/08/10 13:02:04 - set - DEBUG -
org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
/var/opt/tansrv/log/tansrv.log exists - - Thread-5 - -
org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java - 0 - 59 -
chainsaw - log
48 - 2011/08/10 13:02:07 - - DEBUG -
org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
/var/opt/tansrv/log/tansrv.log - tailing file - file size: 275775 - -
Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java
- 2422 - 59 - chainsaw - log
Thank you for your time!
Re: VFSLogFilePatternReceiver not tailing over sftp
Posted by Mihail K <si...@gmail.com>.
Thank you for looking into it. I'm looking forward to the new release!
On Wed, Aug 17, 2011 at 11:12 AM, Scott Deboy <sc...@gmail.com> wrote:
> svn rev 1158546 addressed the inability to tail with SFTP..I will build a
> developer snapshot soon. By the way, there is finally a push to release
> the
> remaining companions and the updated version of Chainsaw, so hopefully that
> will be available as release soon.
>
> Scott
>
> On Wed, Aug 10, 2011 at 5:55 AM, Scott Deboy <sc...@gmail.com>
> wrote:
>
> > I use tailing all the time with the file: support in VFS, so tailing in
> > general is functioning properly, but I was able to repro your tailing
> issue
> > when I used sftp... I'll look into it.
> >
> > Scott
> >
> >
> > On Wed, Aug 10, 2011 at 4:18 AM, Mihail K <si...@gmail.com>
> wrote:
> >
> >> Hello,
> >> Chainsaw is loading the remote log file but no new events are added
> unless
> >> I
> >> manually restart the receiver. Is the tailing feature implemented for
> >> VFSLogFilePatternReceiver? Here's my setup:
> >> - apache-chainsaw-2.1.0-SNAPSHOT from people.apache.org/~sdeboy/<
> http://people.apache.org/%7Esdeboy/>
> >>
> >> - commons-vfs-1.1-SNAPSHOT.jar
> >>
> >> - receiver config:
> >> <plugin name="TansrvReleaseLogFileReceiver"
> >> class="org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver">
> >> <param name="fileURL"
> >> value="sftp://****:*****@78.90.xx.xx///var/opt/tansrv/log/tansrv.log"/>
> >> <param name="logFormat" value="TIMESTAMP LEVEL LOGGER MESSAGE"/>
> >> <param name="tailing" value="true"/>
> >> <param name="autoReconnect" value="true"/>
> >> </plugin>
> >>
> >> Here is VFSLogFilePatternReceiver's chainsaw log output:
> >>
> >> 8 - 2011/08/10 13:01:57 - - INFO -
> >> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - attempting to
> >> load
> >> file: sftp://username:password@78.90.xx.xx
> ///var/opt/tansrv/log/tansrv.log
> >> -
> >> - Thread-5 - - org.apache.log4j.spi.Log4JULogger - info -
> >> Log4JULogger.java - 0 - 105 - chainsaw - log
> >>
> >> 38 - 2011/08/10 13:02:04 - - DEBUG -
> >> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - regexp is
> >> (\S+-\S+-\S+ \S+:\S+:\S+,\S+)[ ]+(\S*\s*?)[ ]+(\S*\s*?)[ ]+(.*) - -
> >> Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug -
> >> Log4JULogger.java
> >> - 7610 - 59 - chainsaw - log
> >>
> >> 39 - 2011/08/10 13:02:04 - set - DEBUG -
> >> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
> >> /var/opt/tansrv/log/tansrv.log exists - - Thread-5 - -
> >> org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java - 0 - 59 -
> >> chainsaw - log
> >>
> >> 48 - 2011/08/10 13:02:07 - - DEBUG -
> >> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
> >> /var/opt/tansrv/log/tansrv.log - tailing file - file size: 275775 - -
> >> Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug -
> >> Log4JULogger.java
> >> - 2422 - 59 - chainsaw - log
> >>
> >> Thank you for your time!
> >>
> >
> >
>
Re: VFSLogFilePatternReceiver not tailing over sftp
Posted by Scott Deboy <sc...@gmail.com>.
svn rev 1158546 addressed the inability to tail with SFTP..I will build a
developer snapshot soon. By the way, there is finally a push to release the
remaining companions and the updated version of Chainsaw, so hopefully that
will be available as release soon.
Scott
On Wed, Aug 10, 2011 at 5:55 AM, Scott Deboy <sc...@gmail.com> wrote:
> I use tailing all the time with the file: support in VFS, so tailing in
> general is functioning properly, but I was able to repro your tailing issue
> when I used sftp... I'll look into it.
>
> Scott
>
>
> On Wed, Aug 10, 2011 at 4:18 AM, Mihail K <si...@gmail.com> wrote:
>
>> Hello,
>> Chainsaw is loading the remote log file but no new events are added unless
>> I
>> manually restart the receiver. Is the tailing feature implemented for
>> VFSLogFilePatternReceiver? Here's my setup:
>> - apache-chainsaw-2.1.0-SNAPSHOT from people.apache.org/~sdeboy/<http://people.apache.org/%7Esdeboy/>
>>
>> - commons-vfs-1.1-SNAPSHOT.jar
>>
>> - receiver config:
>> <plugin name="TansrvReleaseLogFileReceiver"
>> class="org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver">
>> <param name="fileURL"
>> value="sftp://****:*****@78.90.xx.xx///var/opt/tansrv/log/tansrv.log"/>
>> <param name="logFormat" value="TIMESTAMP LEVEL LOGGER MESSAGE"/>
>> <param name="tailing" value="true"/>
>> <param name="autoReconnect" value="true"/>
>> </plugin>
>>
>> Here is VFSLogFilePatternReceiver's chainsaw log output:
>>
>> 8 - 2011/08/10 13:01:57 - - INFO -
>> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - attempting to
>> load
>> file: sftp://username:password@78.90.xx.xx///var/opt/tansrv/log/tansrv.log
>> -
>> - Thread-5 - - org.apache.log4j.spi.Log4JULogger - info -
>> Log4JULogger.java - 0 - 105 - chainsaw - log
>>
>> 38 - 2011/08/10 13:02:04 - - DEBUG -
>> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - regexp is
>> (\S+-\S+-\S+ \S+:\S+:\S+,\S+)[ ]+(\S*\s*?)[ ]+(\S*\s*?)[ ]+(.*) - -
>> Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug -
>> Log4JULogger.java
>> - 7610 - 59 - chainsaw - log
>>
>> 39 - 2011/08/10 13:02:04 - set - DEBUG -
>> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
>> /var/opt/tansrv/log/tansrv.log exists - - Thread-5 - -
>> org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java - 0 - 59 -
>> chainsaw - log
>>
>> 48 - 2011/08/10 13:02:07 - - DEBUG -
>> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
>> /var/opt/tansrv/log/tansrv.log - tailing file - file size: 275775 - -
>> Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug -
>> Log4JULogger.java
>> - 2422 - 59 - chainsaw - log
>>
>> Thank you for your time!
>>
>
>
Re: VFSLogFilePatternReceiver not tailing over sftp
Posted by Scott Deboy <sc...@gmail.com>.
I use tailing all the time with the file: support in VFS, so tailing in
general is functioning properly, but I was able to repro your tailing issue
when I used sftp... I'll look into it.
Scott
On Wed, Aug 10, 2011 at 4:18 AM, Mihail K <si...@gmail.com> wrote:
> Hello,
> Chainsaw is loading the remote log file but no new events are added unless
> I
> manually restart the receiver. Is the tailing feature implemented for
> VFSLogFilePatternReceiver? Here's my setup:
> - apache-chainsaw-2.1.0-SNAPSHOT from people.apache.org/~sdeboy/<http://people.apache.org/%7Esdeboy/>
>
> - commons-vfs-1.1-SNAPSHOT.jar
>
> - receiver config:
> <plugin name="TansrvReleaseLogFileReceiver"
> class="org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver">
> <param name="fileURL"
> value="sftp://****:*****@78.90.xx.xx///var/opt/tansrv/log/tansrv.log"/>
> <param name="logFormat" value="TIMESTAMP LEVEL LOGGER MESSAGE"/>
> <param name="tailing" value="true"/>
> <param name="autoReconnect" value="true"/>
> </plugin>
>
> Here is VFSLogFilePatternReceiver's chainsaw log output:
>
> 8 - 2011/08/10 13:01:57 - - INFO -
> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - attempting to
> load
> file: sftp://username:password@78.90.xx.xx///var/opt/tansrv/log/tansrv.log
> -
> - Thread-5 - - org.apache.log4j.spi.Log4JULogger - info -
> Log4JULogger.java - 0 - 105 - chainsaw - log
>
> 38 - 2011/08/10 13:02:04 - - DEBUG -
> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver - regexp is
> (\S+-\S+-\S+ \S+:\S+:\S+,\S+)[ ]+(\S*\s*?)[ ]+(\S*\s*?)[ ]+(.*) - -
> Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java
> - 7610 - 59 - chainsaw - log
>
> 39 - 2011/08/10 13:02:04 - set - DEBUG -
> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
> /var/opt/tansrv/log/tansrv.log exists - - Thread-5 - -
> org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java - 0 - 59 -
> chainsaw - log
>
> 48 - 2011/08/10 13:02:07 - - DEBUG -
> org.apache.log4j.chainsaw.vfs.VFSLogFilePatternReceiver -
> /var/opt/tansrv/log/tansrv.log - tailing file - file size: 275775 - -
> Thread-5 - - org.apache.log4j.spi.Log4JULogger - debug - Log4JULogger.java
> - 2422 - 59 - chainsaw - log
>
> Thank you for your time!
>