You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by ma...@apache.org on 2017/03/23 22:09:27 UTC
incubator-mynewt-core git commit: Delete unused openocd script files.
Repository: incubator-mynewt-core
Updated Branches:
refs/heads/develop ea988a0cf -> eed3250d1
Delete unused openocd script files.
Project: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/repo
Commit: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/commit/eed3250d
Tree: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/tree/eed3250d
Diff: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/diff/eed3250d
Branch: refs/heads/develop
Commit: eed3250d190fc03d49fe27fe899ce49ef7bdef59
Parents: ea988a0
Author: Marko Kiiskila <ma...@runtime.io>
Authored: Thu Mar 23 15:09:09 2017 -0700
Committer: Marko Kiiskila <ma...@runtime.io>
Committed: Thu Mar 23 15:09:09 2017 -0700
----------------------------------------------------------------------
hw/bsp/sensorhub/f407.cfg | 82 ------------------------
hw/bsp/stm32f429discovery/f429.cfg | 82 ------------------------
hw/bsp/stm32f429discovery/f429discovery.cfg | 22 -------
hw/bsp/stm32f767-nucleo/_f407.cfg | 82 ------------------------
4 files changed, 268 deletions(-)
----------------------------------------------------------------------
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/sensorhub/f407.cfg
----------------------------------------------------------------------
diff --git a/hw/bsp/sensorhub/f407.cfg b/hw/bsp/sensorhub/f407.cfg
deleted file mode 100644
index 7c46d8b..0000000
--- a/hw/bsp/sensorhub/f407.cfg
+++ /dev/null
@@ -1,82 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# script for stm32f4x family
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME stm32f4x
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 64kB
-if { [info exists WORKAREASIZE] } {
- set _WORKAREASIZE $WORKAREASIZE
-} else {
- set _WORKAREASIZE 0x10000
-}
-
-# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-#
-# Since we may be running of an RC oscilator, we crank down the speed a
-# bit more to be on the safe side. Perhaps superstition, but if are
-# running off a crystal, we can run closer to the limit. Note
-# that there can be a pretty wide band where things are more or less stable.
-adapter_khz 1000
-
-adapter_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#jtag scan chain
-if { [info exists CPUTAPID] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # See STM Document RM0090
- # Section 32.6.2 - corresponds to Cortex-M4 r0p1
- set _CPUTAPID 0x4ba00477
-}
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-if { [info exists BSTAPID] } {
- set _BSTAPID $BSTAPID
-} else {
- # See STM Document RM0090
- # Section 32.6.3
- set _BSTAPID 0x06413041
-}
-jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
-
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m3 reset_config sysresetreq
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/stm32f429discovery/f429.cfg
----------------------------------------------------------------------
diff --git a/hw/bsp/stm32f429discovery/f429.cfg b/hw/bsp/stm32f429discovery/f429.cfg
deleted file mode 100644
index cecf912..0000000
--- a/hw/bsp/stm32f429discovery/f429.cfg
+++ /dev/null
@@ -1,82 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# script for stm32f4x family
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME stm32f429x
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 64kB
-if { [info exists WORKAREASIZE] } {
- set _WORKAREASIZE $WORKAREASIZE
-} else {
- set _WORKAREASIZE 0x10000
-}
-
-# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-#
-# Since we may be running of an RC oscilator, we crank down the speed a
-# bit more to be on the safe side. Perhaps superstition, but if are
-# running off a crystal, we can run closer to the limit. Note
-# that there can be a pretty wide band where things are more or less stable.
-adapter_khz 1000
-
-adapter_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#jtag scan chain
-if { [info exists CPUTAPID] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # See STM Document RM0090
- # Section 32.6.2 - corresponds to Cortex-M4 r0p1
- set _CPUTAPID 0x4ba00477
-}
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-if { [info exists BSTAPID] } {
- set _BSTAPID $BSTAPID
-} else {
- # See STM Document RM0090
- # Section 32.6.3
- set _BSTAPID 0x06413041
-}
-jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
-
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m3 reset_config sysresetreq
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/stm32f429discovery/f429discovery.cfg
----------------------------------------------------------------------
diff --git a/hw/bsp/stm32f429discovery/f429discovery.cfg b/hw/bsp/stm32f429discovery/f429discovery.cfg
deleted file mode 100644
index ac77b34..0000000
--- a/hw/bsp/stm32f429discovery/f429discovery.cfg
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-
-# New version of St-link
-source [find interface/stlink-v2-1.cfg]
-transport select hla_swd
-source [find target/stm32f4x.cfg]
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/stm32f767-nucleo/_f407.cfg
----------------------------------------------------------------------
diff --git a/hw/bsp/stm32f767-nucleo/_f407.cfg b/hw/bsp/stm32f767-nucleo/_f407.cfg
deleted file mode 100644
index 7c46d8b..0000000
--- a/hw/bsp/stm32f767-nucleo/_f407.cfg
+++ /dev/null
@@ -1,82 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# script for stm32f4x family
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME stm32f4x
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 64kB
-if { [info exists WORKAREASIZE] } {
- set _WORKAREASIZE $WORKAREASIZE
-} else {
- set _WORKAREASIZE 0x10000
-}
-
-# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-#
-# Since we may be running of an RC oscilator, we crank down the speed a
-# bit more to be on the safe side. Perhaps superstition, but if are
-# running off a crystal, we can run closer to the limit. Note
-# that there can be a pretty wide band where things are more or less stable.
-adapter_khz 1000
-
-adapter_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#jtag scan chain
-if { [info exists CPUTAPID] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # See STM Document RM0090
- # Section 32.6.2 - corresponds to Cortex-M4 r0p1
- set _CPUTAPID 0x4ba00477
-}
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-if { [info exists BSTAPID] } {
- set _BSTAPID $BSTAPID
-} else {
- # See STM Document RM0090
- # Section 32.6.3
- set _BSTAPID 0x06413041
-}
-jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
-
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m3 reset_config sysresetreq