You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Star Guo <st...@ceph.me> on 2015/03/11 01:57:47 UTC
Add virtual disk to kvm guest vm but the console fail
Hi,
I hope to get some advise to debug this issus. Thanks :) .
Best Regards,
Star Guo
===================================================
Hi, Dev Team
I play with cloudstack 4.4.2 + centos 7 kvm. It is ok that I deploy an
instance to kvm host, and the console is ok too.
When I directly add a vdisk via virsh command to this instance, it is ok and
the disk is recongnised but the console in CS UI is fail.
After I remove the vdisk via virsh command from this instance, the console
in CS UI is ok.
How to debug this issue ? Thanks.
My Env:
virsh # pool-list --all
Name State Autostart
-------------------------------------------
797914bf-50ae-328e-9530-cf379313b216 active no
bcf4214b-059d-4017-861c-17d6d9306e2b active no
lvm-pool-sdb active no
virsh # pool-dumpxml lvm-pool-sdb
<pool type='logical'>
<name>lvm-pool-sdb</name>
<uuid>229dee22-af67-4a11-be61-a664676afdce</uuid>
<capacity unit='bytes'>1999839952896</capacity>
<allocation unit='bytes'>10737418240</allocation>
<available unit='bytes'>1989102534656</available>
<source>
<device path='/dev/sdb1'/>
<name>lvm-pool-sdb</name>
<format type='lvm2'/>
</source>
<target>
<path>/dev/lvm-pool-sdb</path>
<permissions>
<mode>0755</mode>
<owner>-1</owner>
<group>-1</group>
</permissions>
</target>
</pool>
virsh # vol-list lvm-pool-sdb
Name Path
----------------------------------------------------------------------------
--
vol1 /dev/lvm-pool-sdb/vol1
I attache disk to i-3-132-VM:
"virsh attach-disk --domain i-3-132-VM --source /dev/lvm-pool-sdb/vol1
--target vdb --targetbus virtio"
And then I open the console of this instance but fail with notice: "Server
Internal Error ".
Best Regards,
Star Guo
Re: Add virtual disk to kvm guest vm but the console fail
Posted by Remi Bergsma <RB...@schubergphilis.com>.
Will have a look and give it a try, thanks.
Sent from my iPhone
> On 11 Mar 2015, at 08:17, Marcus <sh...@gmail.com> wrote:
>
> Look at the 4.5 vote thread, hopefully it will be rolled into the release notes.
>
> On Wed, Mar 11, 2015 at 12:04 AM, Remi Bergsma
> <RB...@schubergphilis.com> wrote:
>> Hi Marcus,
>>
>> Are the tweaks required to use centos7 as a hypervisor documented somewhere?
>>
>> Does the same count for 4.6 aka master?
>>
>> I will be looking into centos7 with kvm soon so would be cool to know what has already be figured out :-)
>>
>> Thanks, Remi
>>
>> Sent from my iPhone
>>
>> On 11 Mar 2015, at 04:26, Marcus <sh...@gmail.com>> wrote:
>>
>> <cut>
>>
>> Also, CentOS 7 is the guest, right? As hypervisor CentOS 7 barely works in
>> 4.5.0 with a bunch of tweaking, but should be just fine as a guest in any
>> recent cloudstack release.
>> On Mar 10, 2015 6:00 PM, "Star Guo" <st...@ceph.me>> wrote:
>>
>> Hi,
>>
>> I hope to get some advise to debug this issus. Thanks :) .
>>
>> Best Regards,
>> Star Guo
>>
>> ===================================================
>>
>> Hi, Dev Team
>>
>> I play with cloudstack 4.4.2 + centos 7 kvm. It is ok that I deploy an
>> instance to kvm host, and the console is ok too.
>> When I directly add a vdisk via virsh command to this instance, it is ok
>> and
>> the disk is recongnised but the console in CS UI is fail.
>> After I remove the vdisk via virsh command from this instance, the console
>> in CS UI is ok.
>> How to debug this issue ? Thanks.
>>
>> My Env:
>>
>> virsh # pool-list --all
>> Name State Autostart
>> -------------------------------------------
>> 797914bf-50ae-328e-9530-cf379313b216 active no
>> bcf4214b-059d-4017-861c-17d6d9306e2b active no
>> lvm-pool-sdb active no
>>
>> virsh # pool-dumpxml lvm-pool-sdb
>> <pool type='logical'>
>> <name>lvm-pool-sdb</name>
>> <uuid>229dee22-af67-4a11-be61-a664676afdce</uuid>
>> <capacity unit='bytes'>1999839952896</capacity>
>> <allocation unit='bytes'>10737418240</allocation>
>> <available unit='bytes'>1989102534656</available>
>> <source>
>> <device path='/dev/sdb1'/>
>> <name>lvm-pool-sdb</name>
>> <format type='lvm2'/>
>> </source>
>> <target>
>> <path>/dev/lvm-pool-sdb</path>
>> <permissions>
>> <mode>0755</mode>
>> <owner>-1</owner>
>> <group>-1</group>
>> </permissions>
>> </target>
>> </pool>
>>
>> virsh # vol-list lvm-pool-sdb
>> Name Path
>>
>> ----------------------------------------------------------------------------
>> --
>> vol1 /dev/lvm-pool-sdb/vol1
>>
>> I attache disk to i-3-132-VM:
>> "virsh attach-disk --domain i-3-132-VM --source /dev/lvm-pool-sdb/vol1
>> --target vdb --targetbus virtio"
>>
>> And then I open the console of this instance but fail with notice: "Server
>> Internal Error ".
>>
>> Best Regards,
>> Star Guo
>>
Re: Add virtual disk to kvm guest vm but the console fail
Posted by Marcus <sh...@gmail.com>.
Look at the 4.5 vote thread, hopefully it will be rolled into the release notes.
On Wed, Mar 11, 2015 at 12:04 AM, Remi Bergsma
<RB...@schubergphilis.com> wrote:
> Hi Marcus,
>
> Are the tweaks required to use centos7 as a hypervisor documented somewhere?
>
> Does the same count for 4.6 aka master?
>
> I will be looking into centos7 with kvm soon so would be cool to know what has already be figured out :-)
>
> Thanks, Remi
>
> Sent from my iPhone
>
> On 11 Mar 2015, at 04:26, Marcus <sh...@gmail.com>> wrote:
>
> <cut>
>
> Also, CentOS 7 is the guest, right? As hypervisor CentOS 7 barely works in
> 4.5.0 with a bunch of tweaking, but should be just fine as a guest in any
> recent cloudstack release.
> On Mar 10, 2015 6:00 PM, "Star Guo" <st...@ceph.me>> wrote:
>
> Hi,
>
> I hope to get some advise to debug this issus. Thanks :) .
>
> Best Regards,
> Star Guo
>
> ===================================================
>
> Hi, Dev Team
>
> I play with cloudstack 4.4.2 + centos 7 kvm. It is ok that I deploy an
> instance to kvm host, and the console is ok too.
> When I directly add a vdisk via virsh command to this instance, it is ok
> and
> the disk is recongnised but the console in CS UI is fail.
> After I remove the vdisk via virsh command from this instance, the console
> in CS UI is ok.
> How to debug this issue ? Thanks.
>
> My Env:
>
> virsh # pool-list --all
> Name State Autostart
> -------------------------------------------
> 797914bf-50ae-328e-9530-cf379313b216 active no
> bcf4214b-059d-4017-861c-17d6d9306e2b active no
> lvm-pool-sdb active no
>
> virsh # pool-dumpxml lvm-pool-sdb
> <pool type='logical'>
> <name>lvm-pool-sdb</name>
> <uuid>229dee22-af67-4a11-be61-a664676afdce</uuid>
> <capacity unit='bytes'>1999839952896</capacity>
> <allocation unit='bytes'>10737418240</allocation>
> <available unit='bytes'>1989102534656</available>
> <source>
> <device path='/dev/sdb1'/>
> <name>lvm-pool-sdb</name>
> <format type='lvm2'/>
> </source>
> <target>
> <path>/dev/lvm-pool-sdb</path>
> <permissions>
> <mode>0755</mode>
> <owner>-1</owner>
> <group>-1</group>
> </permissions>
> </target>
> </pool>
>
> virsh # vol-list lvm-pool-sdb
> Name Path
>
> ----------------------------------------------------------------------------
> --
> vol1 /dev/lvm-pool-sdb/vol1
>
> I attache disk to i-3-132-VM:
> "virsh attach-disk --domain i-3-132-VM --source /dev/lvm-pool-sdb/vol1
> --target vdb --targetbus virtio"
>
> And then I open the console of this instance but fail with notice: "Server
> Internal Error ".
>
> Best Regards,
> Star Guo
>
Re: Add virtual disk to kvm guest vm but the console fail
Posted by Remi Bergsma <RB...@schubergphilis.com>.
Hi Marcus,
Are the tweaks required to use centos7 as a hypervisor documented somewhere?
Does the same count for 4.6 aka master?
I will be looking into centos7 with kvm soon so would be cool to know what has already be figured out :-)
Thanks, Remi
Sent from my iPhone
On 11 Mar 2015, at 04:26, Marcus <sh...@gmail.com>> wrote:
<cut>
Also, CentOS 7 is the guest, right? As hypervisor CentOS 7 barely works in
4.5.0 with a bunch of tweaking, but should be just fine as a guest in any
recent cloudstack release.
On Mar 10, 2015 6:00 PM, "Star Guo" <st...@ceph.me>> wrote:
Hi,
I hope to get some advise to debug this issus. Thanks :) .
Best Regards,
Star Guo
===================================================
Hi, Dev Team
I play with cloudstack 4.4.2 + centos 7 kvm. It is ok that I deploy an
instance to kvm host, and the console is ok too.
When I directly add a vdisk via virsh command to this instance, it is ok
and
the disk is recongnised but the console in CS UI is fail.
After I remove the vdisk via virsh command from this instance, the console
in CS UI is ok.
How to debug this issue ? Thanks.
My Env:
virsh # pool-list --all
Name State Autostart
-------------------------------------------
797914bf-50ae-328e-9530-cf379313b216 active no
bcf4214b-059d-4017-861c-17d6d9306e2b active no
lvm-pool-sdb active no
virsh # pool-dumpxml lvm-pool-sdb
<pool type='logical'>
<name>lvm-pool-sdb</name>
<uuid>229dee22-af67-4a11-be61-a664676afdce</uuid>
<capacity unit='bytes'>1999839952896</capacity>
<allocation unit='bytes'>10737418240</allocation>
<available unit='bytes'>1989102534656</available>
<source>
<device path='/dev/sdb1'/>
<name>lvm-pool-sdb</name>
<format type='lvm2'/>
</source>
<target>
<path>/dev/lvm-pool-sdb</path>
<permissions>
<mode>0755</mode>
<owner>-1</owner>
<group>-1</group>
</permissions>
</target>
</pool>
virsh # vol-list lvm-pool-sdb
Name Path
----------------------------------------------------------------------------
--
vol1 /dev/lvm-pool-sdb/vol1
I attache disk to i-3-132-VM:
"virsh attach-disk --domain i-3-132-VM --source /dev/lvm-pool-sdb/vol1
--target vdb --targetbus virtio"
And then I open the console of this instance but fail with notice: "Server
Internal Error ".
Best Regards,
Star Guo
Re: Add virtual disk to kvm guest vm but the console fail
Posted by Marcus <sh...@gmail.com>.
It is kind of bad to attach disks that cloudstack doesn't know about.
Cloudstack can hot attach disks for you, but I assume you have a specific,
temporary reason to do this (perhaps there is existing data on the disk and
you don't want to import the volume through supported 'volume upload'?).
I can't immediately think of a reason as to why it would make the console
fail, but you might want to start by looking at how the XML for the VM
changes, and perhaps turn on debug in the agent logs and watch for what
happens when it looks for the VNC port during console open.
Also, CentOS 7 is the guest, right? As hypervisor CentOS 7 barely works in
4.5.0 with a bunch of tweaking, but should be just fine as a guest in any
recent cloudstack release.
On Mar 10, 2015 6:00 PM, "Star Guo" <st...@ceph.me> wrote:
> Hi,
>
> I hope to get some advise to debug this issus. Thanks :) .
>
> Best Regards,
> Star Guo
>
> ===================================================
>
> Hi, Dev Team
>
> I play with cloudstack 4.4.2 + centos 7 kvm. It is ok that I deploy an
> instance to kvm host, and the console is ok too.
> When I directly add a vdisk via virsh command to this instance, it is ok
> and
> the disk is recongnised but the console in CS UI is fail.
> After I remove the vdisk via virsh command from this instance, the console
> in CS UI is ok.
> How to debug this issue ? Thanks.
>
> My Env:
>
> virsh # pool-list --all
> Name State Autostart
> -------------------------------------------
> 797914bf-50ae-328e-9530-cf379313b216 active no
> bcf4214b-059d-4017-861c-17d6d9306e2b active no
> lvm-pool-sdb active no
>
> virsh # pool-dumpxml lvm-pool-sdb
> <pool type='logical'>
> <name>lvm-pool-sdb</name>
> <uuid>229dee22-af67-4a11-be61-a664676afdce</uuid>
> <capacity unit='bytes'>1999839952896</capacity>
> <allocation unit='bytes'>10737418240</allocation>
> <available unit='bytes'>1989102534656</available>
> <source>
> <device path='/dev/sdb1'/>
> <name>lvm-pool-sdb</name>
> <format type='lvm2'/>
> </source>
> <target>
> <path>/dev/lvm-pool-sdb</path>
> <permissions>
> <mode>0755</mode>
> <owner>-1</owner>
> <group>-1</group>
> </permissions>
> </target>
> </pool>
>
> virsh # vol-list lvm-pool-sdb
> Name Path
>
> ----------------------------------------------------------------------------
> --
> vol1 /dev/lvm-pool-sdb/vol1
>
> I attache disk to i-3-132-VM:
> "virsh attach-disk --domain i-3-132-VM --source /dev/lvm-pool-sdb/vol1
> --target vdb --targetbus virtio"
>
> And then I open the console of this instance but fail with notice: "Server
> Internal Error ".
>
> Best Regards,
> Star Guo
>
>