You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by Shiv Kumar Dixit <sh...@it.eurofinseu.com.INVALID> on 2025/08/18 09:24:26 UTC
How to check and log client side parameters used in connecting to artemis broker
Hi team,
Is it possible to check (via broker GUI) and/or log client-side parameters used in connecting to artemis broker? I am looking forward to seeing if we can check and/or log details like failover param or jms/nms param along with message selector etc. for consumer and producers connections made on broker.
Best Regards,
Shiv
Re: How to check and log client side parameters used in connecting to artemis broker
Posted by Justin Bertram <jb...@apache.org>.
Thanks for following up. Unfortunately I think a lot of what you want to
audit is client-side specific and not transmitted to the broker (e.g.
failover parameters, most TLS parameters, etc.).
Justin
On Thu, Sep 11, 2025 at 7:50 AM Shiv Kumar Dixit
<sh...@it.eurofinseu.com.invalid> wrote:
> Hello Justin,
> Sorry for delayed response.
>
> Basically, we want to recommend some best practices related to failover
> params, prefetch params, TLS/SSL params etc. to our customers. But we have
> no way to track if they are following those recommendation or not. Hence,
> we are looking for a way if these can be tracked at server side.
>
> Best Regards
> Shiv
>
> -----Original Message-----
> From: Justin Bertram <jb...@apache.org>
> Sent: 18 August 2025 11:26 PM
> To: users@activemq.apache.org
> Subject: Re: How to check and log client side parameters used in
> connecting to artemis broker
>
>
>
> Unverified Sender: The sender of this email has not been verified. Review
> the content of the message carefully and verify the identity of the sender
> before acting on this email: replying, opening attachments or clicking
> links.
>
>
> There is quite a bit of information available about both consumers and
> producers via the web console including the consumer's filter.
>
> You can also log a fair bit of information about consumers and producers
> using the LoggingActiveMQServerPlugin [1].
>
> However, I'm not aware of any client implementation that will send
> fail-over configuration details to the broker as those details are
> specifically for the client itself to use when the connection fails.
> Technically speaking there's no reason to send that kind of data to the
> broker since it is only relevant to the client and as far as I'm aware none
> of the supported protocols even support transmitting those details.
>
> Can you elaborate on the use-case which would benefit from these details?
>
>
> Justin
>
> [1]
>
> https://activemq.apache.org/components/artemis/documentation/latest/broker-plugins.html#using-the-loggingactivemqserverplugin
>
> On Mon, Aug 18, 2025 at 4:31 AM Shiv Kumar Dixit
> <sh...@it.eurofinseu.com.invalid> wrote:
>
> > Hi team,
> > Is it possible to check (via broker GUI) and/or log client-side
> > parameters used in connecting to artemis broker? I am looking forward
> > to seeing if we can check and/or log details like failover param or
> > jms/nms param along with message selector etc. for consumer and
> > producers connections made on broker.
> >
> > Best Regards,
> > Shiv
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@activemq.apache.org
> For additional commands, e-mail: users-help@activemq.apache.org
> For further information, visit: https://activemq.apache.org/contact
>
>
RE: How to check and log client side parameters used in connecting to artemis broker
Posted by Shiv Kumar Dixit <sh...@it.eurofinseu.com.INVALID>.
Hello Justin,
Sorry for delayed response.
Basically, we want to recommend some best practices related to failover params, prefetch params, TLS/SSL params etc. to our customers. But we have no way to track if they are following those recommendation or not. Hence, we are looking for a way if these can be tracked at server side.
Best Regards
Shiv
-----Original Message-----
From: Justin Bertram <jb...@apache.org>
Sent: 18 August 2025 11:26 PM
To: users@activemq.apache.org
Subject: Re: How to check and log client side parameters used in connecting to artemis broker
Unverified Sender: The sender of this email has not been verified. Review the content of the message carefully and verify the identity of the sender before acting on this email: replying, opening attachments or clicking links.
There is quite a bit of information available about both consumers and producers via the web console including the consumer's filter.
You can also log a fair bit of information about consumers and producers using the LoggingActiveMQServerPlugin [1].
However, I'm not aware of any client implementation that will send fail-over configuration details to the broker as those details are specifically for the client itself to use when the connection fails.
Technically speaking there's no reason to send that kind of data to the broker since it is only relevant to the client and as far as I'm aware none of the supported protocols even support transmitting those details.
Can you elaborate on the use-case which would benefit from these details?
Justin
[1]
https://activemq.apache.org/components/artemis/documentation/latest/broker-plugins.html#using-the-loggingactivemqserverplugin
On Mon, Aug 18, 2025 at 4:31 AM Shiv Kumar Dixit <sh...@it.eurofinseu.com.invalid> wrote:
> Hi team,
> Is it possible to check (via broker GUI) and/or log client-side
> parameters used in connecting to artemis broker? I am looking forward
> to seeing if we can check and/or log details like failover param or
> jms/nms param along with message selector etc. for consumer and
> producers connections made on broker.
>
> Best Regards,
> Shiv
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@activemq.apache.org
For additional commands, e-mail: users-help@activemq.apache.org
For further information, visit: https://activemq.apache.org/contact
Re: How to check and log client side parameters used in connecting to artemis broker
Posted by Justin Bertram <jb...@apache.org>.
There is quite a bit of information available about both consumers and
producers via the web console including the consumer's filter.
You can also log a fair bit of information about consumers and producers
using the LoggingActiveMQServerPlugin [1].
However, I'm not aware of any client implementation that will send
fail-over configuration details to the broker as those details are
specifically for the client itself to use when the connection fails.
Technically speaking there's no reason to send that kind of data to the
broker since it is only relevant to the client and as far as I'm aware none
of the supported protocols even support transmitting those details.
Can you elaborate on the use-case which would benefit from these details?
Justin
[1]
https://activemq.apache.org/components/artemis/documentation/latest/broker-plugins.html#using-the-loggingactivemqserverplugin
On Mon, Aug 18, 2025 at 4:31 AM Shiv Kumar Dixit
<sh...@it.eurofinseu.com.invalid> wrote:
> Hi team,
> Is it possible to check (via broker GUI) and/or log client-side parameters
> used in connecting to artemis broker? I am looking forward to seeing if we
> can check and/or log details like failover param or jms/nms param along
> with message selector etc. for consumer and producers connections made on
> broker.
>
> Best Regards,
> Shiv
>
>