You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@nuttx.apache.org by xi...@apache.org on 2022/08/07 15:33:24 UTC
[incubator-nuttx] branch master updated: Fix typos
This is an automated email from the ASF dual-hosted git repository.
xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new dd718e78f7 Fix typos
dd718e78f7 is described below
commit dd718e78f70f9350ac648067509672c5051841b9
Author: Nathan Hartman <59...@users.noreply.github.com>
AuthorDate: Sun Aug 7 09:20:07 2022 -0400
Fix typos
---
arch/arm/src/nrf52/nrf52_radio.c | 2 +-
arch/arm/src/nrf52/nrf52_radio.h | 2 +-
arch/arm/src/phy62xx/flash.c | 2 +-
arch/arm/src/phy62xx/global_config.h | 2 +-
arch/renesas/src/rx65n/rx65n_usbhost.c | 4 ++--
arch/x86_64/Kconfig | 2 +-
boards/arm/cxd56xx/common/src/cxd56_altmdm.c | 2 +-
boards/arm/cxd56xx/common/src/cxd56_bmi160_scu.c | 2 +-
boards/arm/cxd56xx/common/src/cxd56_emmcdev.c | 4 ++--
boards/arm/cxd56xx/common/src/cxd56_spisd.c | 2 +-
.../arm/imxrt/imxrt1060-evk/scripts/flash-ocram.ld | 2 +-
.../arm/imxrt/imxrt1064-evk/scripts/flash-ocram.ld | 2 +-
boards/arm/imxrt/teensy-4.x/scripts/flash-ocram.ld | 2 +-
boards/arm/imxrt/teensy-4.x/src/teensy-4.h | 2 +-
.../arm/lpc17xx_40xx/lpcxpresso-lpc1768/README.txt | 2 +-
boards/arm/rp2040/common/src/rp2040_spisd.c | 2 +-
.../s32k1xx/rddrone-bms772/src/s32k1xx_smbus_sbd.c | 2 +-
.../s32k1xx/rddrone-bms772/src/s32k1xx_ssd1306.c | 2 +-
.../arm/s32k3xx/mr-canhubk3/src/s32k3xx_bringup.c | 26 +++++++++++-----------
.../arm/s32k3xx/mr-canhubk3/src/s32k3xx_selftest.c | 14 ++++++------
.../arm/s32k3xx/mr-canhubk3/src/s32k3xx_tja1153.c | 2 +-
boards/arm/sama5/sama5d4-ek/README.txt | 2 +-
boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c | 2 +-
.../stm32/nucleo-f446re/src/stm32_foc_ihm08m1.c | 2 +-
.../stm32/nucleo-g431rb/src/stm32_foc_ihm16m1.c | 2 +-
boards/arm/stm32wl5/nucleo-wl55jc/Kconfig | 2 +-
boards/arm/stm32wl5/nucleo-wl55jc/README.txt | 4 ++--
boards/arm/stm32wl5/nucleo-wl55jc/include/board.h | 2 +-
.../arm/stm32wl5/nucleo-wl55jc/src/stm32_flash.c | 4 ++--
.../tlsr82/tlsr8278adk80d/scripts/flash_boot.ld | 2 +-
.../tlsr8278adk80d/scripts/flash_boot_ble.ld | 2 +-
boards/arm64/qemu/qemu-a53/README.txt | 10 ++++-----
.../renesas/rx65n/rx65n-grrose/include/README.TXT | 2 +-
.../renesas/rx65n/rx65n-rsk2mb/include/README.TXT | 2 +-
boards/risc-v/c906/smartl-c906/scripts/Make.defs | 2 +-
boards/risc-v/c906/smartl-c906/src/c906_leds.c | 4 ++--
boards/risc-v/mpfs/icicle/scripts/Make.defs | 2 +-
boards/risc-v/mpfs/icicle/src/mpfs_autoleds.c | 4 ++--
boards/risc-v/mpfs/m100pfsevp/scripts/Make.defs | 2 +-
boards/risc-v/mpfs/m100pfsevp/src/mpfs_autoleds.c | 4 ++--
boards/risc-v/rv32m1/rv32m1-vega/README.txt | 4 ++--
boards/sim/sim/sim/Kconfig | 2 +-
boards/sim/sim/sim/README.txt | 2 +-
boards/sparc/bm3803/xx3803/Kconfig | 2 +-
boards/sparc/bm3803/xx3803/src/bm3803_boot.c | 2 +-
boards/sparc/bm3823/xx3823/src/bm3823_boot.c | 2 +-
boards/z80/ez80/z20x/README.txt | 4 ++--
drivers/misc/rwbuffer.c | 9 ++++----
sched/init/nx_start.c | 2 +-
sched/semaphore/sem_holder.c | 2 +-
sched/tls/task_initinfo.c | 2 +-
sched/tls/tls.h | 4 ++--
sched/tls/tls_initinfo.c | 2 +-
53 files changed, 89 insertions(+), 88 deletions(-)
diff --git a/arch/arm/src/nrf52/nrf52_radio.c b/arch/arm/src/nrf52/nrf52_radio.c
index 5ba6f38b03..f515984e9b 100644
--- a/arch/arm/src/nrf52/nrf52_radio.c
+++ b/arch/arm/src/nrf52/nrf52_radio.c
@@ -594,7 +594,7 @@ static int nrf52_radio_pkt_cfg(struct nrf52_radio_dev_s *dev,
pcnf1 |= (cfg->bal_len << RADIO_PCNF1_BALEN_SHIFT);
- /* Configure on-air endianess of packet */
+ /* Configure on-air endianness of packet */
pcnf1 |= (cfg->endian << RADIO_PCNF1_ENDIAN_SHIFT);
diff --git a/arch/arm/src/nrf52/nrf52_radio.h b/arch/arm/src/nrf52/nrf52_radio.h
index 3131cc893b..8f7478b254 100644
--- a/arch/arm/src/nrf52/nrf52_radio.h
+++ b/arch/arm/src/nrf52/nrf52_radio.h
@@ -137,7 +137,7 @@ struct nrf52_radio_pktcfg_s
uint8_t pl_len; /* Preamble length */
uint8_t term_len; /* TERM length */
bool crcinc; /* LENGTH includes CRC */
- bool endian; /* On air endianess of packet:
+ bool endian; /* On air endianness of packet:
* 0 - little
* 1 - big
*/
diff --git a/arch/arm/src/phy62xx/flash.c b/arch/arm/src/phy62xx/flash.c
index 971ec5ac7e..cd3f853478 100644
--- a/arch/arm/src/phy62xx/flash.c
+++ b/arch/arm/src/phy62xx/flash.c
@@ -184,7 +184,7 @@ void __RAMRUN hal_spif_init(void)
*(volatile uint32_t *) 0x4000c804 = 0x41220eb; /* Device Read Instruction Register */
return;
- /* load defualt configure */
+ /* load default configure */
while (1)
{
diff --git a/arch/arm/src/phy62xx/global_config.h b/arch/arm/src/phy62xx/global_config.h
index e0c328f1d0..d12c637b30 100644
--- a/arch/arm/src/phy62xx/global_config.h
+++ b/arch/arm/src/phy62xx/global_config.h
@@ -156,7 +156,7 @@
#define RC32_TRACKINK_ALLOW 0x00000001 /* enable tracking RC 32KHz clock with 16MHz hclk */
#define SLAVE_LATENCY_ALLOW 0x00000002 /* slave latency allow switch */
-#define LL_DEBUG_ALLOW 0x00000004 /* enable invoke RAM project debug output fucntion */
+#define LL_DEBUG_ALLOW 0x00000004 /* enable invoke RAM project debug output function */
#define LL_WHITELIST_ALLOW 0x00000008 /* enable whitelist filter */
#define LL_RC32K_SEL 0x00000010 /* select RC32K RTC, otherwise select crystal 32K RTC */
#define SIMUL_CONN_ADV_ALLOW 0x00000020 /* allow send adv in connect state */
diff --git a/arch/renesas/src/rx65n/rx65n_usbhost.c b/arch/renesas/src/rx65n/rx65n_usbhost.c
index 367a60c55d..74ce635086 100644
--- a/arch/renesas/src/rx65n/rx65n_usbhost.c
+++ b/arch/renesas/src/rx65n/rx65n_usbhost.c
@@ -5034,7 +5034,7 @@ static inline void rx65n_usbhost_edfree(struct rx65n_usbhost_ed_s *ed)
static struct rx65n_usbhost_gtd_s *rx65n_usbhost_tdalloc(uint8_t ep_num)
{
/* Currently each TD would associate with one EP. So the ep_numb is
- * passed to tdalloc fucntion and it would return the TD with this,
+ * passed to tdalloc function and it would return the TD with this,
* there is no need to free this
*/
@@ -5686,7 +5686,7 @@ static int rx65n_usbhost_enqueuetd(struct rx65n_usbhost_s *priv,
/* Allocate a TD from the free list */
/* Currently each TD would associate with one EP. So the epnumb
- * is passed to tdalloc fucntion and it would return the TD with
+ * is passed to tdalloc function and it would return the TD with
* this, there is no need to free this - there is no need
*/
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 8764903c64..fac4bb7d61 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -37,7 +37,7 @@ choice
default ARCH_BOARD_QEMU
config ARCH_BOARD_QEMU
- bool "Qemu envrionment"
+ bool "Qemu environment"
---help---
Targeting virtualized qemu environment
diff --git a/boards/arm/cxd56xx/common/src/cxd56_altmdm.c b/boards/arm/cxd56xx/common/src/cxd56_altmdm.c
index 559f873f41..8e9868ba39 100644
--- a/boards/arm/cxd56xx/common/src/cxd56_altmdm.c
+++ b/boards/arm/cxd56xx/common/src/cxd56_altmdm.c
@@ -375,7 +375,7 @@ int board_altmdm_initialize(const char *devpath)
if (!g_devhandle)
{
- /* Initialize spi deivce */
+ /* Initialize spi device */
spi = cxd56_spibus_initialize(SPI_CH);
if (!spi)
diff --git a/boards/arm/cxd56xx/common/src/cxd56_bmi160_scu.c b/boards/arm/cxd56xx/common/src/cxd56_bmi160_scu.c
index e2d8678f25..aa80ed2395 100644
--- a/boards/arm/cxd56xx/common/src/cxd56_bmi160_scu.c
+++ b/boards/arm/cxd56xx/common/src/cxd56_bmi160_scu.c
@@ -119,7 +119,7 @@ int board_bmi160_initialize(int bus)
sninfo("Initializing BMI160..\n");
- /* Initialize i2c deivce */
+ /* Initialize i2c device */
i2c = cxd56_i2cbus_initialize(bus);
if (!i2c)
diff --git a/boards/arm/cxd56xx/common/src/cxd56_emmcdev.c b/boards/arm/cxd56xx/common/src/cxd56_emmcdev.c
index 1f18751ff5..03925c5b2a 100644
--- a/boards/arm/cxd56xx/common/src/cxd56_emmcdev.c
+++ b/boards/arm/cxd56xx/common/src/cxd56_emmcdev.c
@@ -65,7 +65,7 @@ int board_emmc_initialize(void)
return -ENODEV;
}
- /* Initialize the eMMC deivce */
+ /* Initialize the eMMC device */
ret = cxd56_emmcinitialize();
if (ret < 0)
@@ -74,7 +74,7 @@ int board_emmc_initialize(void)
return -ENODEV;
}
- /* Mount the eMMC deivce */
+ /* Mount the eMMC device */
ret = nx_mount("/dev/emmc0", "/mnt/emmc", "vfat", 0, NULL);
if (ret < 0)
diff --git a/boards/arm/cxd56xx/common/src/cxd56_spisd.c b/boards/arm/cxd56xx/common/src/cxd56_spisd.c
index 7b802c8e13..7bd690d35d 100644
--- a/boards/arm/cxd56xx/common/src/cxd56_spisd.c
+++ b/boards/arm/cxd56xx/common/src/cxd56_spisd.c
@@ -68,7 +68,7 @@ int board_spisd_initialize(int minor, int bus)
cxd56_gpio_config(MMCSD_DETECT, true);
- /* Initialize spi deivce */
+ /* Initialize spi device */
spi = cxd56_spibus_initialize(bus);
if (!spi)
diff --git a/boards/arm/imxrt/imxrt1060-evk/scripts/flash-ocram.ld b/boards/arm/imxrt/imxrt1060-evk/scripts/flash-ocram.ld
index 5ef4d4be2d..f94066f110 100644
--- a/boards/arm/imxrt/imxrt1060-evk/scripts/flash-ocram.ld
+++ b/boards/arm/imxrt/imxrt1060-evk/scripts/flash-ocram.ld
@@ -29,7 +29,7 @@
* 256Kib to OCRRAM, 128Kib ITCM and 128Kib DTCM.
* This can be changed by using a dcd by minipulating
* IOMUX GPR16 and GPR17.
- * The configuartion we will use is 384Kib to OCRRAM, 0Kib ITCM and
+ * The configuration we will use is 384Kib to OCRRAM, 0Kib ITCM and
* 128Kib DTCM.
*
* This is the OCRAM inker script.
diff --git a/boards/arm/imxrt/imxrt1064-evk/scripts/flash-ocram.ld b/boards/arm/imxrt/imxrt1064-evk/scripts/flash-ocram.ld
index eb31e64c78..88434807fd 100644
--- a/boards/arm/imxrt/imxrt1064-evk/scripts/flash-ocram.ld
+++ b/boards/arm/imxrt/imxrt1064-evk/scripts/flash-ocram.ld
@@ -29,7 +29,7 @@
* 256Kib to OCRRAM, 128Kib ITCM and 128Kib DTCM.
* This can be changed by using a dcd by minipulating
* IOMUX GPR16 and GPR17.
- * The configuartion we will use is 384Kib to OCRRAM, 0Kib ITCM and
+ * The configuration we will use is 384Kib to OCRRAM, 0Kib ITCM and
* 128Kib DTCM.
*
* This is the OCRAM inker script.
diff --git a/boards/arm/imxrt/teensy-4.x/scripts/flash-ocram.ld b/boards/arm/imxrt/teensy-4.x/scripts/flash-ocram.ld
index b6b3ff5dcb..7fcc212499 100644
--- a/boards/arm/imxrt/teensy-4.x/scripts/flash-ocram.ld
+++ b/boards/arm/imxrt/teensy-4.x/scripts/flash-ocram.ld
@@ -29,7 +29,7 @@
* 256Kib to OCRRAM, 128Kib ITCM and 128Kib DTCM.
* This can be changed by using a dcd by minipulating
* IOMUX GPR16 and GPR17.
- * The configuartion we will use is 384Kib to OCRRAM, 0Kib ITCM and
+ * The configuration we will use is 384Kib to OCRRAM, 0Kib ITCM and
* 128Kib DTCM.
*
* This is the OCRAM inker script.
diff --git a/boards/arm/imxrt/teensy-4.x/src/teensy-4.h b/boards/arm/imxrt/teensy-4.x/src/teensy-4.h
index 15fcbd8b78..17362cac03 100644
--- a/boards/arm/imxrt/teensy-4.x/src/teensy-4.h
+++ b/boards/arm/imxrt/teensy-4.x/src/teensy-4.h
@@ -78,7 +78,7 @@
#define GPIO_LPSPI4_CS (GPIO_OUTPUT | GPIO_OUTPUT_ONE | \
GPIO_PORT2 | GPIO_PIN0 | IOMUX_LPSPI4_CS)
-/* LCD dispay */
+/* LCD display */
#define GPIO_LCD_RST (GPIO_OUTPUT | GPIO_OUTPUT_ONE | \
GPIO_PORT2 | GPIO_PIN18 | IOMUX_LPSPI4_CS) /* B1_02 */
diff --git a/boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768/README.txt b/boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768/README.txt
index 486ec17f0e..722670e5d9 100644
--- a/boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768/README.txt
+++ b/boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768/README.txt
@@ -603,7 +603,7 @@ Where <subdir> is one of the following:
At last attempt, the SPI-based mircroSD does not work at
higher fequencies. Setting the SPI frequency to 400000
removes the problem. There must be some more optimal
- value that could be determined with additional experimetnation.
+ value that could be determined with additional experimentation.
Jumpers: J55 must be set to provide chip select PIO1_11 signal as
the SD slot chip select.
diff --git a/boards/arm/rp2040/common/src/rp2040_spisd.c b/boards/arm/rp2040/common/src/rp2040_spisd.c
index 9d56b668c4..83a515577b 100644
--- a/boards/arm/rp2040/common/src/rp2040_spisd.c
+++ b/boards/arm/rp2040/common/src/rp2040_spisd.c
@@ -59,7 +59,7 @@ int board_spisd_initialize(int minor, int bus)
int ret;
struct spi_dev_s *spi;
- /* Initialize spi deivce */
+ /* Initialize spi device */
spi = rp2040_spibus_initialize(bus);
if (!spi)
diff --git a/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_smbus_sbd.c b/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_smbus_sbd.c
index 1d7029c821..29903ffffe 100644
--- a/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_smbus_sbd.c
+++ b/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_smbus_sbd.c
@@ -383,7 +383,7 @@ static ssize_t smbus_sbd_write(struct file *filep, const char *buffer,
* arg - Pointer to the SMBus Smart Battery Data slave device struct
*
* Returned Value:
- * OK if a new write buffer was succesfully registered in response to the
+ * OK if a new write buffer was successfully registered in response to the
* received command; A negated errno value is returned on any failure.
*
****************************************************************************/
diff --git a/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_ssd1306.c b/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_ssd1306.c
index 18eb4283c9..fee650ba5a 100644
--- a/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_ssd1306.c
+++ b/boards/arm/s32k1xx/rddrone-bms772/src/s32k1xx_ssd1306.c
@@ -78,7 +78,7 @@ int board_lcd_initialize(void)
return -ENODEV;
}
- lcdinfo("Succesfully initialized SSD1306 on LPI2C0\n");
+ lcdinfo("Successfully initialized SSD1306 on LPI2C0\n");
return ret;
}
diff --git a/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_bringup.c b/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_bringup.c
index b56ea9e84e..0350a41efb 100644
--- a/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_bringup.c
+++ b/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_bringup.c
@@ -103,7 +103,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("s32k3xx_spidev_initialize() succesful\n");
+ _info("s32k3xx_spidev_initialize() successful\n");
}
#endif
@@ -117,7 +117,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("btn_lower_initialize() succesful\n");
+ _info("btn_lower_initialize() successful\n");
}
#endif
@@ -131,7 +131,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("userled_lower_initialize() succesful\n");
+ _info("userled_lower_initialize() successful\n");
}
#endif
@@ -145,7 +145,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("Mounting procfs at /proc succesful\n");
+ _info("Mounting procfs at /proc successful\n");
}
#endif
@@ -159,7 +159,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("s32k3xx_i2cdev_initialize() succesful\n");
+ _info("s32k3xx_i2cdev_initialize() successful\n");
}
#endif
@@ -173,7 +173,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("s32k3xx_qspi_initialize() succesful\n");
+ _info("s32k3xx_qspi_initialize() successful\n");
/* Use the QSPI device instance to initialize the MX25 device */
@@ -184,7 +184,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("mx25rxx_initialize() succesful\n");
+ _info("mx25rxx_initialize() successful\n");
# ifdef HAVE_MX25L_LITTLEFS
/* Configure the device with no partition support */
@@ -199,7 +199,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("register_mtddriver() succesful\n");
+ _info("register_mtddriver() successful\n");
ret = nx_mount(blockdev, "/mnt/qspi", "littlefs", 0, NULL);
if (ret < 0)
@@ -212,7 +212,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("nx_mount() succesful\n");
+ _info("nx_mount() successful\n");
}
}
}
@@ -227,7 +227,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("nxffs_initialize() succesful\n");
+ _info("nxffs_initialize() successful\n");
/* Mount the file system at /mnt/qspi */
@@ -238,7 +238,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("nx_mount() succesful\n");
+ _info("nx_mount() successful\n");
}
}
@@ -253,7 +253,7 @@ int s32k3xx_bringup(void)
# ifdef CONFIG_BCH
else
{
- _info("ftl_initialize() succesful\n");
+ _info("ftl_initialize() successful\n");
/* Use the minor number to create device paths */
@@ -271,7 +271,7 @@ int s32k3xx_bringup(void)
}
else
{
- _info("bchdev_register %s succesful\n", chardev);
+ _info("bchdev_register %s successful\n", chardev);
}
}
# endif /* CONFIG_BCH */
diff --git a/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_selftest.c b/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_selftest.c
index 85df009d5b..9d4a644364 100644
--- a/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_selftest.c
+++ b/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_selftest.c
@@ -86,7 +86,7 @@ static int s32k3xx_selftest_se050(void)
if (lpi2c1 != NULL)
{
- _info("s32k3xx_i2cbus_initialize() succesful\n");
+ _info("s32k3xx_i2cbus_initialize() successful\n");
}
else
{
@@ -107,7 +107,7 @@ static int s32k3xx_selftest_se050(void)
ret = I2C_TRANSFER(lpi2c1, &se050_msg, 1);
if (ret == 0)
{
- _info("SE050 ACK succesful\n");
+ _info("SE050 ACK successful\n");
}
else
{
@@ -123,7 +123,7 @@ static int s32k3xx_selftest_se050(void)
if (ret == 0)
{
- _info("s32k3xx_i2cbus_uninitialize() succesful\n");
+ _info("s32k3xx_i2cbus_uninitialize() successful\n");
/* Return error if we had any earlier, otherwise return result of
* s32k3xx_i2cbus_uninitialize()
@@ -244,7 +244,7 @@ static int s32k3xx_selftest_can(void)
{
if (s32k3xx_gpioread(errn_pins[i]))
{
- _info("CAN%d flag check succesful\n", i);
+ _info("CAN%d flag check successful\n", i);
}
else
{
@@ -353,7 +353,7 @@ static int s32k3xx_selftest_sct(void)
{
if (s32k3xx_gpioread(rxd_pins[i - 4]))
{
- _info("CAN%d RXD high check succesful\n", i);
+ _info("CAN%d RXD high check successful\n", i);
}
else
{
@@ -379,7 +379,7 @@ static int s32k3xx_selftest_sct(void)
{
if (!s32k3xx_gpioread(rxd_pins[i - 4]))
{
- _info("CAN%d RXD low check succesful\n", i);
+ _info("CAN%d RXD low check successful\n", i);
}
else
{
@@ -457,7 +457,7 @@ void s32k3xx_selftest(void)
if (!error)
{
- _info("s32k3xx_selftest() succesful\n");
+ _info("s32k3xx_selftest() successful\n");
}
}
diff --git a/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_tja1153.c b/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_tja1153.c
index 738fdb8bfe..ec0518d78d 100644
--- a/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_tja1153.c
+++ b/boards/arm/s32k3xx/mr-canhubk3/src/s32k3xx_tja1153.c
@@ -327,7 +327,7 @@ int s32k3xx_tja1153_initialize(int bus)
}
close(sock);
- _info("CAN%d TJA1153 configuration succesful\n", bus);
+ _info("CAN%d TJA1153 configuration successful\n", bus);
return 0;
}
diff --git a/boards/arm/sama5/sama5d4-ek/README.txt b/boards/arm/sama5/sama5d4-ek/README.txt
index 1557528568..227ccc9822 100644
--- a/boards/arm/sama5/sama5d4-ek/README.txt
+++ b/boards/arm/sama5/sama5d4-ek/README.txt
@@ -2572,7 +2572,7 @@ I2C Tool
o The I2C dev command may have bad side effects on your I2C devices.
Use only at your own risk.
- As an example, the I2C dev comman can be used to list all devices
+ As an example, the I2C dev command can be used to list all devices
responding on TWI0 (the default) like this:
nsh> i2c dev 0x03 0x77
diff --git a/boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c b/boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c
index df43b49028..0887fdc1dc 100644
--- a/boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c
+++ b/boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c
@@ -212,7 +212,7 @@ static void board_foc_trace(struct foc_dev_s *dev, int type, bool state);
* Private Data
****************************************************************************/
-/* OPAMP confuguration:
+/* OPAMP configuration:
* - connected with ADC through output pin (OPAINTOEN=0)
* - Current U+ - OPAMP1_VINP0 (PA1)
* - Current U- - OPAMP1_VINP0 (PA3)
diff --git a/boards/arm/stm32/nucleo-f446re/src/stm32_foc_ihm08m1.c b/boards/arm/stm32/nucleo-f446re/src/stm32_foc_ihm08m1.c
index 678efd36b6..a3ef5ac348 100644
--- a/boards/arm/stm32/nucleo-f446re/src/stm32_foc_ihm08m1.c
+++ b/boards/arm/stm32/nucleo-f446re/src/stm32_foc_ihm08m1.c
@@ -67,7 +67,7 @@
* Private Data
****************************************************************************/
-/* FOC ADC configration:
+/* FOC ADC configuration:
* - Current Phase V -> ADC1 INJ1 -> ADC1_IN0 (PA0)
* - Current Phase U -> ADC1 INJ2 -> ADC1_IN11 (PC1)
* - Current Phase W -> ADC1 INJ3 -> ADC1_IN10 (PC0)
diff --git a/boards/arm/stm32/nucleo-g431rb/src/stm32_foc_ihm16m1.c b/boards/arm/stm32/nucleo-g431rb/src/stm32_foc_ihm16m1.c
index 2d189346b1..04aad5de40 100644
--- a/boards/arm/stm32/nucleo-g431rb/src/stm32_foc_ihm16m1.c
+++ b/boards/arm/stm32/nucleo-g431rb/src/stm32_foc_ihm16m1.c
@@ -67,7 +67,7 @@
* Private Data
****************************************************************************/
-/* FOC ADC configration:
+/* FOC ADC configuration:
* - Current Phase V -> ADC1 INJ1 -> ADC1_IN2 (PA1)
* - Current Phase U -> ADC1 INJ2 -> ADC1_IN12 (PB1)
* - Current Phase W -> ADC1 INJ3 -> ADC1_IN15 (PB0)
diff --git a/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig b/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig
index b22834bb01..60e2258a52 100644
--- a/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig
+++ b/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig
@@ -138,7 +138,7 @@ config ARCH_BOARD_FLASH_PART1_FS_SMARTFS
when flashing new software, unless you exceeded reserved
memory for program code.
- Smartfs uses quite substential ammount of FLASH data to
+ Smartfs uses quite substential amount of FLASH data to
get to workable state and mount. Looks like 8 page sizes
is absolute minimum (so a 16KiB!).
diff --git a/boards/arm/stm32wl5/nucleo-wl55jc/README.txt b/boards/arm/stm32wl5/nucleo-wl55jc/README.txt
index 1528692fb9..01d5aba4b3 100644
--- a/boards/arm/stm32wl5/nucleo-wl55jc/README.txt
+++ b/boards/arm/stm32wl5/nucleo-wl55jc/README.txt
@@ -50,8 +50,8 @@ Serial Console
NSH is configured to use LPUART and virtual serial port. After flashing
you can open /dev/ttyACM0 (may change depending on your system) and nsh
- prompt will be waiting for you there. Serial device does not disapear
- when flashing and reseting board - it can be left opened and flashing
+ prompt will be waiting for you there. Serial device does not disappear
+ when flashing and resetting board - it can be left opened and flashing
will work without problems.
Configuration
diff --git a/boards/arm/stm32wl5/nucleo-wl55jc/include/board.h b/boards/arm/stm32wl5/nucleo-wl55jc/include/board.h
index d786833bd0..6902c1f5f8 100644
--- a/boards/arm/stm32wl5/nucleo-wl55jc/include/board.h
+++ b/boards/arm/stm32wl5/nucleo-wl55jc/include/board.h
@@ -152,7 +152,7 @@
* PA1 - Button 2
* PC6 - Button 3
*
- * Buttons need to be pulled up internaly by chip,
+ * Buttons need to be pulled up internally by chip,
* and button press will pull pin down to LOW level.
*/
diff --git a/boards/arm/stm32wl5/nucleo-wl55jc/src/stm32_flash.c b/boards/arm/stm32wl5/nucleo-wl55jc/src/stm32_flash.c
index e9e7ed5891..6233dfc2a4 100644
--- a/boards/arm/stm32wl5/nucleo-wl55jc/src/stm32_flash.c
+++ b/boards/arm/stm32wl5/nucleo-wl55jc/src/stm32_flash.c
@@ -228,7 +228,7 @@ int stm32wl5_flash_init(void)
finfo("[%s] creating partition, size: %d, fs: %s, offset: %d\n",
name, size, fs, offset);
- /* create mtd parition */
+ /* create mtd partition */
mtd_part = mtd_partition(mtd, offset, size);
@@ -313,7 +313,7 @@ int stm32wl5_flash_init(void)
ferr("[%s]ERROR: nx_mount failed: %d\n", name, ret);
if (ret == ENODEV)
{
- syslog(LOG_INFO, "[%s] mtd, smartfs seems unformated. "
+ syslog(LOG_INFO, "[%s] mtd, smartfs seems unformatted. "
"Did you run 'mksmartfs %s'?\n", name, src);
}
diff --git a/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot.ld b/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot.ld
index 49907e8cc1..d5f5dba405 100644
--- a/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot.ld
+++ b/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot.ld
@@ -72,7 +72,7 @@ SECTIONS
PROVIDE(_rstored_ = . );
PROVIDE(_code_size_ = .);
- /* __LOAD_FLASH for MCU RUN IN Flash 0x100 alighned, must greater
+ /* __LOAD_FLASH for MCU RUN IN Flash 0x100 aligned, must greater
* than or equal to : 0x808000 + ram_code_size + irq_vector(0x100) +
* IC_tag(0x100) + IC_cache(0x800) == 0x808a00 + ram_code_size
*
diff --git a/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot_ble.ld b/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot_ble.ld
index 1c142a31ee..fee10f1f14 100644
--- a/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot_ble.ld
+++ b/boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot_ble.ld
@@ -147,7 +147,7 @@ SECTIONS
PROVIDE(_rstored_ = . );
PROVIDE(_code_size_ = .);
- /* __LOAD_FLASH for MCU RUN IN Flash 0x100 alighned, must greater
+ /* __LOAD_FLASH for MCU RUN IN Flash 0x100 aligned, must greater
* than or equal to : 0x808000 + ram_code_size + irq_vector(0x100) +
* IC_tag(0x100) + IC_cache(0x800) == 0x808a00 + ram_code_size
*
diff --git a/boards/arm64/qemu/qemu-a53/README.txt b/boards/arm64/qemu/qemu-a53/README.txt
index c8420dc958..a7711064b0 100644
--- a/boards/arm64/qemu/qemu-a53/README.txt
+++ b/boards/arm64/qemu/qemu-a53/README.txt
@@ -55,7 +55,7 @@ Getting Started
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-a53:nsh_smp
$ make
- Runing with qemu
+ Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
@@ -98,7 +98,7 @@ Status
Running ostest seem PASSED.
2.qemu-a53 board configuration support: qemu-a53 board can configuring
- and compiling, And runing with qemu-system-aarch64
+ and compiling, And running with qemu-system-aarch64
at Ubuntu 18.04.
3.FPU support for armv8-a: FPU context switching in NEON/floating-point
TRAP was supported. FPU registers saving at vfork and independent
@@ -196,7 +196,7 @@ the content of FP registers used for floating point argument passing
into the va_list object in case there were actual float arguments from
the caller. But In practice this is almost never the case.
Seeing the save_count/restore_count at the g_cpu_fpu_ctx, which will
-be increase when saving/restoring FPU context. After runing ostest,
+be increase when saving/restoring FPU context. After running ostest,
we can see the count with GDB:
(gdb) p g_cpu_fpu_ctx
@@ -218,7 +218,7 @@ index c58fb45512..acac6febaa
VPATH += :syslog
+syslog/lib_syslog.c_CFLAGS += -mgeneral-regs-only
- With the option to make NuttX and booting. After runing ostest, see
+ With the option to make NuttX and booting. After running ostest, see
the count with GDB again:
(gdb) p g_cpu_fpu_ctx
@@ -240,7 +240,7 @@ Add the option to your code maybe increase FPU performance
handling for this case, it will inc/dec at enter/leave exception. If the
exception_depth > 1, that means an exception occurring when another exception
is executing, the present implement is to switch FPU context to idle thread,
-it will handle most case for calling printf-like rountine at IRQ routine.
+it will handle most case for calling printf-like routine at IRQ routine.
But in fact, this case will make uncertainty interrupt processing time sine
it's uncertainty for trap exception handling. It would be best to add
"-mgeneral-regs-only" option to compile the IRQ code avoiding accessing FP
diff --git a/boards/renesas/rx65n/rx65n-grrose/include/README.TXT b/boards/renesas/rx65n/rx65n-grrose/include/README.TXT
index b40fe3eba8..41f632d389 100644
--- a/boards/renesas/rx65n/rx65n-grrose/include/README.TXT
+++ b/boards/renesas/rx65n/rx65n-grrose/include/README.TXT
@@ -25,7 +25,7 @@ README
script; /etc/passwd is a the password file. It supports a single user:
USERNAME: admin
- PASSWORD: Adminstrator
+ PASSWORD: Administrator
nsh> cat /etc/passwd
admin:8Tv+Hbmr3pLddSjtzL0kwC:0:0:/
diff --git a/boards/renesas/rx65n/rx65n-rsk2mb/include/README.TXT b/boards/renesas/rx65n/rx65n-rsk2mb/include/README.TXT
index 1587eda1c1..ff3e64396a 100644
--- a/boards/renesas/rx65n/rx65n-rsk2mb/include/README.TXT
+++ b/boards/renesas/rx65n/rx65n-rsk2mb/include/README.TXT
@@ -25,7 +25,7 @@ README
script; /etc/passwd is a the password file. It supports a single user:
USERNAME: admin
- PASSWORD: Adminstrator
+ PASSWORD: Administrator
nsh> cat /etc/passwd
admin:8Tv+Hbmr3pLddSjtzL0kwC:0:0:/
diff --git a/boards/risc-v/c906/smartl-c906/scripts/Make.defs b/boards/risc-v/c906/smartl-c906/scripts/Make.defs
index d1cba31900..13aa6816c1 100644
--- a/boards/risc-v/c906/smartl-c906/scripts/Make.defs
+++ b/boards/risc-v/c906/smartl-c906/scripts/Make.defs
@@ -33,7 +33,7 @@ ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
# The following options are for the toolchain from T-HEAD.
# For more info ahout the T-HEAD ISA extensions, please refer to the C906 user guide.
# ARCHCPUFLAGS = -march=rv64gcxthead -mabi=lp64d -mtune=c906 -mcmodel=medany
-# TODO: We are not going to enable this at this time for the CI compatiblity.
+# TODO: We are not going to enable this at this time for the CI compatibility.
ARCHCPUFLAGS += -mcmodel=medany
diff --git a/boards/risc-v/c906/smartl-c906/src/c906_leds.c b/boards/risc-v/c906/smartl-c906/src/c906_leds.c
index e8c09ef150..3f00ed4846 100644
--- a/boards/risc-v/c906/smartl-c906/src/c906_leds.c
+++ b/boards/risc-v/c906/smartl-c906/src/c906_leds.c
@@ -48,7 +48,7 @@ void board_autoled_initialize(void)
* Name: board_autoled_on
*
* Description:
- * Turn on the LED specificed.
+ * Turn on the LED specified.
*
* Input Parameters:
* led - The LED which is under this control
@@ -63,7 +63,7 @@ void board_autoled_on(int led)
* Name: board_autoled_off
*
* Description:
- * Turn off the LED specificed.
+ * Turn off the LED specified.
*
* Input Parameters:
* led - The LED which is under this control
diff --git a/boards/risc-v/mpfs/icicle/scripts/Make.defs b/boards/risc-v/mpfs/icicle/scripts/Make.defs
index 22b4cc5a11..c8080633a3 100644
--- a/boards/risc-v/mpfs/icicle/scripts/Make.defs
+++ b/boards/risc-v/mpfs/icicle/scripts/Make.defs
@@ -52,7 +52,7 @@ ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
# The following options are for the toolchain from T-HEAD.
# For more info ahout the T-HEAD ISA extensions, please refer to the MPFS user guide.
# ARCHCPUFLAGS = -march=rv64gcxthead -mabi=lp64d -mcmodel=medany
-# TODO: We are not going to enable this at this time for the CI compatiblity.
+# TODO: We are not going to enable this at this time for the CI compatibility.
ARCHCPUFLAGS += -mcmodel=medany
diff --git a/boards/risc-v/mpfs/icicle/src/mpfs_autoleds.c b/boards/risc-v/mpfs/icicle/src/mpfs_autoleds.c
index 1d8afb93e4..49f480d00e 100644
--- a/boards/risc-v/mpfs/icicle/src/mpfs_autoleds.c
+++ b/boards/risc-v/mpfs/icicle/src/mpfs_autoleds.c
@@ -58,7 +58,7 @@ void board_autoled_initialize(void)
* Name: board_autoled_on
*
* Description:
- * Turn on the LED specificed.
+ * Turn on the LED specified.
*
* Input Parameters:
* led - The LED which is under this control
@@ -115,7 +115,7 @@ void board_autoled_on(int led)
* Name: board_autoled_off
*
* Description:
- * Turn off the LED specificed.
+ * Turn off the LED specified.
*
* Input Parameters:
* led - The LED which is under this control
diff --git a/boards/risc-v/mpfs/m100pfsevp/scripts/Make.defs b/boards/risc-v/mpfs/m100pfsevp/scripts/Make.defs
index d54f3ae6be..b74eb4721a 100644
--- a/boards/risc-v/mpfs/m100pfsevp/scripts/Make.defs
+++ b/boards/risc-v/mpfs/m100pfsevp/scripts/Make.defs
@@ -33,7 +33,7 @@ ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
# The following options are for the toolchain from T-HEAD.
# For more info ahout the T-HEAD ISA extensions, please refer to the MPFS user guide.
# ARCHCPUFLAGS = -march=rv64gcxthead -mabi=lp64d -mcmodel=medany
-# TODO: We are not going to enable this at this time for the CI compatiblity.
+# TODO: We are not going to enable this at this time for the CI compatibility.
ARCHCPUFLAGS += -mcmodel=medany
diff --git a/boards/risc-v/mpfs/m100pfsevp/src/mpfs_autoleds.c b/boards/risc-v/mpfs/m100pfsevp/src/mpfs_autoleds.c
index f9da8d664c..ef87b4ea29 100644
--- a/boards/risc-v/mpfs/m100pfsevp/src/mpfs_autoleds.c
+++ b/boards/risc-v/mpfs/m100pfsevp/src/mpfs_autoleds.c
@@ -51,7 +51,7 @@ void board_autoled_initialize(void)
* Name: board_autoled_on
*
* Description:
- * Turn on the LED specificed.
+ * Turn on the LED specified.
*
* Input Parameters:
* led - The LED which is under this control
@@ -73,7 +73,7 @@ void board_autoled_on(int led)
* Name: board_autoled_off
*
* Description:
- * Turn off the LED specificed.
+ * Turn off the LED specified.
*
* Input Parameters:
* led - The LED which is under this control
diff --git a/boards/risc-v/rv32m1/rv32m1-vega/README.txt b/boards/risc-v/rv32m1/rv32m1-vega/README.txt
index fe927277a2..6a757d09d3 100644
--- a/boards/risc-v/rv32m1/rv32m1-vega/README.txt
+++ b/boards/risc-v/rv32m1/rv32m1-vega/README.txt
@@ -232,8 +232,8 @@ nsh-itcm
This configuration is a variant of the NSH configuration used for
demonstrating ITCM. When ITCM is selected, RI5CY Exception Vectors and
Interrupt Service Routines are placed in ITCM. Performance can be calculated
- by getprime, and you might find it deteriorated a litte ironically. The drawback
+ by getprime, and you might find it deteriorated a little ironically. The drawback
may be caused by long jump frequently between ITCM and flash. Besides, an instr-
uction cache is enabled always after RI5CY resets, and amelioration could not be
achieved with even ITCM enabled.
- What if codes fullfill the 64KB ITCM ?
+ What if codes fulfill the 64KB ITCM ?
diff --git a/boards/sim/sim/sim/Kconfig b/boards/sim/sim/sim/Kconfig
index 1b76943666..358fa8df37 100644
--- a/boards/sim/sim/sim/Kconfig
+++ b/boards/sim/sim/sim/Kconfig
@@ -56,7 +56,7 @@ config SIM_WTGAHRS2_UARTN
default -1
depends on SENSORS_WTGAHRS2 && SIM_UART_NUMBER > 0
---help---
- We can select the number accoding to which SIM_UARTX_NAME is uesd to sensor.
+ We can select the number according to which SIM_UARTX_NAME is used to sensor.
This range is 0-4.
config SIM_I2CBUS_ID
diff --git a/boards/sim/sim/sim/README.txt b/boards/sim/sim/sim/README.txt
index ef5642f653..53aef33b32 100644
--- a/boards/sim/sim/sim/README.txt
+++ b/boards/sim/sim/sim/README.txt
@@ -1382,7 +1382,7 @@ ustream
vncserver
This a simple vnc server test configuration, Remmina is tested and recommended since
- there are some compatibility issues. By defualt SIM will be blocked at startup to
+ there are some compatibility issues. By default SIM will be blocked at startup to
wait client connection, if a client connected, then the fb example will launch.
vpnkit
diff --git a/boards/sparc/bm3803/xx3803/Kconfig b/boards/sparc/bm3803/xx3803/Kconfig
index 543c35277e..7aa80a6c10 100644
--- a/boards/sparc/bm3803/xx3803/Kconfig
+++ b/boards/sparc/bm3803/xx3803/Kconfig
@@ -19,7 +19,7 @@ config XX3803_WDG_TIMEOUT
if XX3803_WDG
config XX3803_WDG_THREAD
- bool "Watchdog Deamon Thread"
+ bool "Watchdog Daemon Thread"
if XX3803_WDG_THREAD
config XX3803_WDG_THREAD_NAME
diff --git a/boards/sparc/bm3803/xx3803/src/bm3803_boot.c b/boards/sparc/bm3803/xx3803/src/bm3803_boot.c
index bd35d63d75..a916c28f76 100644
--- a/boards/sparc/bm3803/xx3803/src/bm3803_boot.c
+++ b/boards/sparc/bm3803/xx3803/src/bm3803_boot.c
@@ -49,7 +49,7 @@
*
* Description:
* All bm3803 architectures must provide the following entry point.
- * This entry point is called early in the intitialization -- after all
+ * This entry point is called early in the initialization -- after all
* memory has been configured and mapped but before any devices have been
* initialized.
*
diff --git a/boards/sparc/bm3823/xx3823/src/bm3823_boot.c b/boards/sparc/bm3823/xx3823/src/bm3823_boot.c
index f1efbd9dbb..97c5ac5186 100644
--- a/boards/sparc/bm3823/xx3823/src/bm3823_boot.c
+++ b/boards/sparc/bm3823/xx3823/src/bm3823_boot.c
@@ -49,7 +49,7 @@
*
* Description:
* All bm3823 architectures must provide the following entry point.
- * This entry point is called early in the intitialization -- after all
+ * This entry point is called early in the initialization -- after all
* memory has been configured and mapped but before any devices have been
* initialized.
*
diff --git a/boards/z80/ez80/z20x/README.txt b/boards/z80/ez80/z20x/README.txt
index b35d1ba3ad..97951c7896 100644
--- a/boards/z80/ez80/z20x/README.txt
+++ b/boards/z80/ez80/z20x/README.txt
@@ -33,7 +33,7 @@ Contents
o ZDS-II Compiler Versions
o Environments
- o Memory Constaints
+ o Memory Constraints
o Serial Console
o LEDs and Buttons
- LEDs
@@ -83,7 +83,7 @@ Native
The Windows native build has not been attempt. I would expect that it
would have numerous problems.
-Memory Constaints
+Memory Constraints
=================
The eZ80F92 has a smaller FLASH memory of 128Kb. That combined with the
diff --git a/drivers/misc/rwbuffer.c b/drivers/misc/rwbuffer.c
index fe7698e3b9..7f267bae0e 100644
--- a/drivers/misc/rwbuffer.c
+++ b/drivers/misc/rwbuffer.c
@@ -418,7 +418,7 @@ static ssize_t rwb_writebuffer(FAR struct rwbuffer_s *rwb,
#ifdef CONFIG_DRVR_READAHEAD
static inline void rwb_resetrhbuffer(FAR struct rwbuffer_s *rwb)
{
- /* We assume that the caller holds the readAheadBufferSemphore */
+ /* We assume that the caller holds the readAheadBufferSemaphore */
rwb->rhnblocks = 0;
rwb->rhblockstart = -1;
@@ -436,9 +436,10 @@ rwb_bufferread(FAR struct rwbuffer_s *rwb, off_t startblock,
{
FAR uint8_t *rhbuffer;
- /* We assume that (1) the caller holds the readAheadBufferSemphore, and (2)
- * that the caller already knows that all of the blocks are in the
- * read-ahead buffer.
+ /* We assume that:
+ * (1) the caller holds the readAheadBufferSemaphore, and
+ * (2) the caller already knows that all of the blocks are in the
+ * read-ahead buffer.
*/
/* Convert the units from blocks to bytes */
diff --git a/sched/init/nx_start.c b/sched/init/nx_start.c
index 497bf298ac..0ee8077e74 100644
--- a/sched/init/nx_start.c
+++ b/sched/init/nx_start.c
@@ -575,7 +575,7 @@ void nx_start(void)
}
#endif
- /* Disables context switching beacuse we need take the memory manager
+ /* Disables context switching because we need take the memory manager
* semaphore on this CPU so that it will not be available on the other
* CPUs until we have finished initialization.
*/
diff --git a/sched/semaphore/sem_holder.c b/sched/semaphore/sem_holder.c
index 69970f7a84..43188f884d 100644
--- a/sched/semaphore/sem_holder.c
+++ b/sched/semaphore/sem_holder.c
@@ -989,7 +989,7 @@ void nxsem_release_holder(FAR sem_t *sem)
if (total == 1)
{
- /* If the sempahore has only one holder, we can decrement the counts
+ /* If the semaphore has only one holder, we can decrement the counts
* simply.
*/
diff --git a/sched/tls/task_initinfo.c b/sched/tls/task_initinfo.c
index 0ff904e73f..761c349d96 100644
--- a/sched/tls/task_initinfo.c
+++ b/sched/tls/task_initinfo.c
@@ -37,7 +37,7 @@
* Name: task_init_info
*
* Description:
- * Allocate and initilize task_info_s structure.
+ * Allocate and initialize task_info_s structure.
*
* Input Parameters:
* - group: The group of new task
diff --git a/sched/tls/tls.h b/sched/tls/tls.h
index 2e584b3959..474085ba0f 100644
--- a/sched/tls/tls.h
+++ b/sched/tls/tls.h
@@ -53,7 +53,7 @@
* Name: task_init_info
*
* Description:
- * Allocate and initilize task_info_s structure.
+ * Allocate and initialize task_info_s structure.
*
* Input Parameters:
* - group: The group of new task
@@ -85,7 +85,7 @@ void task_uninit_info(FAR struct task_group_s *group);
* Name: tls_init_info
*
* Description:
- * Allocate and initilize tls_info_s structure.
+ * Allocate and initialize tls_info_s structure.
*
* Input Parameters:
* - tcb: The TCB of new task
diff --git a/sched/tls/tls_initinfo.c b/sched/tls/tls_initinfo.c
index 78ac2a1dc8..ad4bf3719b 100644
--- a/sched/tls/tls_initinfo.c
+++ b/sched/tls/tls_initinfo.c
@@ -35,7 +35,7 @@
* Name: tls_init_info
*
* Description:
- * Allocate and initilize tls_info_s structure.
+ * Allocate and initialize tls_info_s structure.
*
* Input Parameters:
* - tcb: The TCB of new task