You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@karaf.apache.org by Krzysztof Sobkowiak <kr...@gmail.com> on 2013/12/26 03:15:37 UTC
Re: How is config admin data stored?
Hi
How can I force to create the config file in etc using
config:edit/config:update with nonexisting pid in 3.0.0? I tried to add
the felix.fileinstall.filename property but the file is not created.
Best regards
Krzysztof
On 25.06.2013 10:17, Achim Nierbeck wrote:
> ahh, yes that's the property one needs ... (and I was looking for ...)
> so basically it should already do if one supplies this property in the
> config element,
> wouldn't it?
> So basically we should close that issue with a little bit of
> documentation :-)
> If this property
>
> felix.fileinstall.filename=foo.bar.cfg
>
> is applied it'll be written to the etc folder
>
> need to test it but it might work right away ;)
>
>
> regards, Achim
>
>
> 2013/6/25 Jean-Baptiste Onofré <jb@nanthrax.net <ma...@nanthrax.net>>
>
> It does that if the FileInstall felix.fileinstall.filename
> property exist in the configuration PID.
>
> For the config element, we can do exactly as we do in
> config:update command and Config MBean.
>
> Regards
> JB
>
>
> On 06/25/2013 08:52 AM, Christian Schneider wrote:
>
> Currently config admin keeps track if the config was
> originally read
> from a file. If yes then changes are also written back to the
> original file.
> If no then changes are only done in memory.
>
> So I think it would make sense to have an option on the config
> element
> to decide if it should be persisted to a file. Unfortunately
> this means
> that we have to do more than just call the config admin in
> this case.
>
>
> Chrisitan
>
> Am 24.06.2013 16:20, schrieb Lothar Werzinger:
>
>
> I think it should at least create the file when the data
> is modified
> via config amin (e.g. the web interface). Creating it on
> feature
> install is a bonus, but not strictly necessary
>
> Lothar Werzinger
>
> Sent from a mobile device.
>
>
> This message and any attachment (the "message") is
> intended solely for
> the addressees and is confidential. If you receive this
> message by
> mistake, please delete it and notify the sender
> immediately. Any use
> not in accordance with its purpose, any out-spread or
> disclosure,
> either as a whole or partially, is prohibited except with
> formal
> approval. Internet cannot guarantee the integrity of this
> message,
> therefore Tradescape will not be liable for the message if
> modified.
>
> -
>
>
>
> --
>
> Christian Schneider
> http://www.liquid-reality.de
>
> Open Source Architect
> Talend Application Integration Divisionhttp://www.talend.com
> <http://www.talend.com>
>
>
> --
> Jean-Baptiste Onofré
> jbonofre@apache.org <ma...@apache.org>
> http://blog.nanthrax.net
> Talend - http://www.talend.com
>
>
>
>
> --
>
> Apache Karaf <http://karaf.apache.org/> Committer & PMC
> OPS4J Pax Web <http://wiki.ops4j.org/display/paxweb/Pax+Web/>
> Committer & Project Lead
> OPS4J Pax for Vaadin
> <http://team.ops4j.org/wiki/display/PAXVAADIN/Home> Commiter & Project
> Lead
> blog <http://notizblog.nierbeck.de/>
--
Krzysztof Sobkowiak
JEE & OSS Architect | Technical Architect @ Capgemini
e-mail: krzys.sobkowiak@gmail.com <ma...@gmail.com> |
Twitter: @KSobkowiak
Re: How is config admin data stored?
Posted by Jean-Baptiste Onofré <jb...@nanthrax.net>.
Hi Krzysztof,
config:edit should do the trick straight forward using the ConfigAdmin
persistence. However, I don't see the persistence adapter call (I
remember that Christian did a change around that).
I gonna create a Jira about that and fix that for 3.0.1.
Regards
JB
On 12/26/2013 03:15 AM, Krzysztof Sobkowiak wrote:
> Hi
>
> How can I force to create the config file in etc using
> config:edit/config:update with nonexisting pid in 3.0.0? I tried to add
> the felix.fileinstall.filename property but the file is not created.
>
> Best regards
> Krzysztof
>
> On 25.06.2013 10:17, Achim Nierbeck wrote:
>> ahh, yes that's the property one needs ... (and I was looking for ...)
>> so basically it should already do if one supplies this property in the
>> config element,
>> wouldn't it?
>> So basically we should close that issue with a little bit of
>> documentation :-)
>> If this property
>>
>> felix.fileinstall.filename=foo.bar.cfg
>>
>> is applied it'll be written to the etc folder
>>
>> need to test it but it might work right away ;)
>>
>>
>> regards, Achim
>>
>>
>> 2013/6/25 Jean-Baptiste Onofré <jb@nanthrax.net <ma...@nanthrax.net>>
>>
>> It does that if the FileInstall felix.fileinstall.filename
>> property exist in the configuration PID.
>>
>> For the config element, we can do exactly as we do in
>> config:update command and Config MBean.
>>
>> Regards
>> JB
>>
>>
>> On 06/25/2013 08:52 AM, Christian Schneider wrote:
>>
>> Currently config admin keeps track if the config was
>> originally read
>> from a file. If yes then changes are also written back to the
>> original file.
>> If no then changes are only done in memory.
>>
>> So I think it would make sense to have an option on the config
>> element
>> to decide if it should be persisted to a file. Unfortunately
>> this means
>> that we have to do more than just call the config admin in
>> this case.
>>
>>
>> Chrisitan
>>
>> Am 24.06.2013 16:20, schrieb Lothar Werzinger:
>>
>>
>> I think it should at least create the file when the data
>> is modified
>> via config amin (e.g. the web interface). Creating it on
>> feature
>> install is a bonus, but not strictly necessary
>>
>> Lothar Werzinger
>>
>> Sent from a mobile device.
>>
>>
>> This message and any attachment (the "message") is
>> intended solely for
>> the addressees and is confidential. If you receive this
>> message by
>> mistake, please delete it and notify the sender
>> immediately. Any use
>> not in accordance with its purpose, any out-spread or
>> disclosure,
>> either as a whole or partially, is prohibited except with
>> formal
>> approval. Internet cannot guarantee the integrity of this
>> message,
>> therefore Tradescape will not be liable for the message if
>> modified.
>>
>> -
>>
>>
>>
>> --
>>
>> Christian Schneider
>> http://www.liquid-reality.de
>>
>> Open Source Architect
>> Talend Application Integration Divisionhttp://www.talend.com
>> <http://www.talend.com>
>>
>>
>> --
>> Jean-Baptiste Onofré
>> jbonofre@apache.org <ma...@apache.org>
>> http://blog.nanthrax.net
>> Talend - http://www.talend.com
>>
>>
>>
>>
>> --
>>
>> Apache Karaf <http://karaf.apache.org/> Committer & PMC
>> OPS4J Pax Web <http://wiki.ops4j.org/display/paxweb/Pax+Web/>
>> Committer & Project Lead
>> OPS4J Pax for Vaadin
>> <http://team.ops4j.org/wiki/display/PAXVAADIN/Home> Commiter & Project
>> Lead
>> blog <http://notizblog.nierbeck.de/>
>
>
> --
> Krzysztof Sobkowiak
>
> JEE & OSS Architect | Technical Architect @ Capgemini
> e-mail: krzys.sobkowiak@gmail.com <ma...@gmail.com> |
> Twitter: @KSobkowiak
--
Jean-Baptiste Onofré
jbonofre@apache.org
http://blog.nanthrax.net
Talend - http://www.talend.com