You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@doris.apache.org by 德 李 <li...@apache.org> on 2019/02/01 08:25:09 UTC
[VOTE] Release Apache Doris 0.9.0-incubating-rc02
Hi all,
Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
The release candidate has been tagged in GitHub as 0.9.0-rc02, available
here:
https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
There is no CHANGE LOG file because this is the first release of Apache
Doris.
Thanks to everyone who has contributed to this release, and there is a
simple release notes can be found here:
https://github.com/apache/incubator-doris/issues/406
The artifacts (source, signature and checksum) corresponding to this release
candidate can be found here:
https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-rc02
/
This has been signed with PGP key 33DBF2E0, corresponding to
lide@apache.org.
KEYS file is available here:
https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
It is also listed here:
https://people.apache.org/keys/committer/lide.asc
To verify and build, you can refer to following wiki:
https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Release
https://wiki.apache.org/incubator/IncubatorReleaseChecklist
The vote will be open for at least 72 hours.
[ ] +1 Approve the release
[ ] +0 No opinion
[ ] -1 Do not release this package because ...
Best Regards,
Reed
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by "Li,De(BDG)" <li...@baidu.com>.
Thank you, Willem, I added the list of the third-part dependency to
README[1].
Best Regards,
Reed
On 2019/2/2 上午11:25， "Willem Jiang" <wi...@gmail.com> wrote:
>Can you give a list of the third-part dependency in the README[1] of
>docker?
>In this way, we could let people build the source code from scratch by
>themself, if they want.
>
>[1]https://github.com/apache/incubator-doris/blob/master/docker/Docker_bui
>ld.md
>Willem Jiang
>
>Twitter: willemjiang
>Weibo: 姜宁willem
>
>On Sat, Feb 2, 2019 at 11:19 AM Zhao Chun <bu...@gmail.com> wrote:
>>
>> Hi, Willem
>>
>> Because downloading some third-party source package is very slow and
>> sometimes maybe fail.
>> We put all third-party source packages in storage service which is
>>located
>> in China
>>
>> And that URL is the third-party packages'.
>>
>> Thanks,
>> ZHAO Chun
>>
>>
>>
>> Willem Jiang <wi...@gmail.com> 于2019年2月2日周六 上午11:00写道：
>>
>> > Thanks for pointing that out. Here is a black box[1] I just found from
>> > the Dockerfile.
>> > Could you explain the detail of third party dependencies?
>> >
>> > [1]
>> >
>>https://github.com/apache/incubator-doris/blob/master/docker/Dockerfile#L
>>98
>> >
>> > Willem Jiang
>> >
>> > Twitter: willemjiang
>> > Weibo: 姜宁willem
>> >
>> > On Sat, Feb 2, 2019 at 10:45 AM Li,De(BDG) <li...@baidu.com> wrote:
>> > >
>> > > Hi,
>> > >
>> > > Yes, the Dockerfile is located in docker/Dockerfile of source
>>package.
>> > >
>> > >
>> > > Reed
>> > >
>> > > On 2019/2/2 上午10:38， "Willem Jiang" <wi...@gmail.com> wrote:
>> > >
>> > > >Oh, I know how to use docker image to build the source code by
>>going
>> > > >through the instruction.
>> > > >My question is how to build the build box image, can you point me
>>the
>> > > >docker file of build-env?
>> > > >
>> > > >Willem Jiang
>> > > >
>> > > >Twitter: willemjiang
>> > > >Weibo: 姜宁willem
>> > > >
>> > > >On Sat, Feb 2, 2019 at 10:31 AM 德 李 <li...@apache.org> wrote:
>> > > >>
>> > > >> Hi Willem,
>> > > >>
>> > > >> Yes, we have an docker image, and following is the instruction
>>for
>> > > >> building, thank you:
>> > > >>
>> > > >> Firstly, you must be install and start docker service.
>> > > >> And then you could build Doris as following steps:
>> > > >> Step1: Pull the docker image with Doris building environment
>> > > >> $ docker pull apachedoris/doris-dev:build-env
>> > > >>
>> > > >> You can check it by listing images, for example:
>> > > >> $ docker images
>> > > >> REPOSITORY TAG IMAGE ID
>> > CREATED
>> > > >> SIZE
>> > > >> apachedoris/doris-dev build-env f8bc5d4024e0
>>21
>> > hours
>> > > >> ago 3.28GB
>> > > >>
>> > > >> Step2: Run the Docker image
>> > > >> You can run image directyly:
>> > > >> $ docker run -it apachedoris/doris-dev:build-env
>> > > >>
>> > > >> Step3: Download Doris source
>> > > >> Now you should in docker environment, and you can download Doris
>> > source
>> > > >>by
>> > > >> release package or by git clone in image.
>> > > >> (If you have downloaded source and it is not in image, you can
>>map its
>> > > >> path to image in Step2.)
>> > > >> $ wget
>> > https://dist.apache.org/repos/dist/dev/incubator/doris/xxx.tar.gz
>> > > >>
>> > > >> Step4: Build Doris
>> > > >> Now you can enter Doris source path and build Doris.
>> > > >> $ sh build.sh
>> > > >> After successfully building, it will install binary files in the
>> > > >>directory
>> > > >> output/.
>> > > >>
>> > > >>
>> > > >> Best Regards
>> > > >> Reed
>> > > >>
>> > > >> On 2019/2/2 上午10:25， "Willem Jiang" <wi...@gmail.com>
>>wrote:
>> > > >>
>> > > >> >Hi,
>> > > >> >
>> > > >> >It's good to see we have a docker build image to address source
>>to
>> > > >>binary
>> > > >> >issue.
>> > > >> >Is there any docker file or instruction of how to generate the
>>docker
>> > > >> >image? It can help us to verify the whole process.
>> > > >> >
>> > > >> >Willem Jiang
>> > > >> >
>> > > >> >Twitter: willemjiang
>> > > >> >Weibo: 姜宁willem
>> > > >> >
>> > > >> >On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
>> > > >> >>
>> > > >> >> Hi all,
>> > > >> >>
>> > > >> >> Please review and vote on Apache Doris 0.9.0-incubating-rc02
>> > release.
>> > > >> >>
>> > > >> >> The release candidate has been tagged in GitHub as 0.9.0-rc02,
>> > > >>available
>> > > >> >> here:
>> > > >> >>
>>https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>> > > >> >>
>> > > >> >> There is no CHANGE LOG file because this is the first release
>>of
>> > > >>Apache
>> > > >> >> Doris.
>> > > >> >> Thanks to everyone who has contributed to this release, and
>>there
>> > is
>> > > >>a
>> > > >> >> simple release notes can be found here:
>> > > >> >> https://github.com/apache/incubator-doris/issues/406
>> > > >> >>
>> > > >> >> The artifacts (source, signature and checksum) corresponding
>>to
>> > this
>> > > >> >>release
>> > > >> >> candidate can be found here:
>> > > >> >>
>> > > >>
>> > > >>>>
>> >
>>https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating
>> > > >>>>-r
>> > > >> >>c02
>> > > >> >> /
>> > > >> >>
>> > > >> >> This has been signed with PGP key 33DBF2E0, corresponding to
>> > > >> >> lide@apache.org.
>> > > >> >> KEYS file is available here:
>> > > >> >> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
>> > > >> >> It is also listed here:
>> > > >> >> https://people.apache.org/keys/committer/lide.asc
>> > > >> >>
>> > > >> >> To verify and build, you can refer to following wiki:
>> > > >> >>
>> > > >>
>> > > >>>>
>> >
>>https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Rel
>> > > >>>>ea
>> > > >> >>se
>> > > >> >> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>> > > >> >>
>> > > >> >> The vote will be open for at least 72 hours.
>> > > >> >> [ ] +1 Approve the release
>> > > >> >> [ ] +0 No opinion
>> > > >> >> [ ] -1 Do not release this package because ...
>> > > >> >>
>> > > >> >> Best Regards,
>> > > >> >> Reed
>> > > >> >>
>> > > >> >>
>> > > >> >
>> > > >>
>>>---------------------------------------------------------------------
>> > > >> >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>> > > >> >For additional commands, e-mail: dev-help@doris.apache.org
>> > > >> >
>> > > >>
>> > > >>
>> > > >>
>> > > >>
>>---------------------------------------------------------------------
>> > > >> To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>> > > >> For additional commands, e-mail: dev-help@doris.apache.org
>> > > >>
>> > > >
>> > >
>>>---------------------------------------------------------------------
>> > > >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>> > > >For additional commands, e-mail: dev-help@doris.apache.org
>> > > >
>> > >
>> >
>> > ---------------------------------------------------------------------
>> > To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>> > For additional commands, e-mail: dev-help@doris.apache.org
>> >
>> >
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>For additional commands, e-mail: dev-help@doris.apache.org
>
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by Willem Jiang <wi...@gmail.com>.
Can you give a list of the third-part dependency in the README[1] of docker?
In this way, we could let people build the source code from scratch by
themself, if they want.
[1]https://github.com/apache/incubator-doris/blob/master/docker/Docker_build.md
Willem Jiang
Twitter: willemjiang
Weibo: 姜宁willem
On Sat, Feb 2, 2019 at 11:19 AM Zhao Chun <bu...@gmail.com> wrote:
>
> Hi, Willem
>
> Because downloading some third-party source package is very slow and
> sometimes maybe fail.
> We put all third-party source packages in storage service which is located
> in China
>
> And that URL is the third-party packages'.
>
> Thanks,
> ZHAO Chun
>
>
>
> Willem Jiang <wi...@gmail.com> 于2019年2月2日周六 上午11:00写道：
>
> > Thanks for pointing that out. Here is a black box[1] I just found from
> > the Dockerfile.
> > Could you explain the detail of third party dependencies?
> >
> > [1]
> > https://github.com/apache/incubator-doris/blob/master/docker/Dockerfile#L98
> >
> > Willem Jiang
> >
> > Twitter: willemjiang
> > Weibo: 姜宁willem
> >
> > On Sat, Feb 2, 2019 at 10:45 AM Li,De(BDG) <li...@baidu.com> wrote:
> > >
> > > Hi,
> > >
> > > Yes, the Dockerfile is located in docker/Dockerfile of source package.
> > >
> > >
> > > Reed
> > >
> > > On 2019/2/2 上午10:38， "Willem Jiang" <wi...@gmail.com> wrote:
> > >
> > > >Oh, I know how to use docker image to build the source code by going
> > > >through the instruction.
> > > >My question is how to build the build box image, can you point me the
> > > >docker file of build-env?
> > > >
> > > >Willem Jiang
> > > >
> > > >Twitter: willemjiang
> > > >Weibo: 姜宁willem
> > > >
> > > >On Sat, Feb 2, 2019 at 10:31 AM 德 李 <li...@apache.org> wrote:
> > > >>
> > > >> Hi Willem,
> > > >>
> > > >> Yes, we have an docker image, and following is the instruction for
> > > >> building, thank you:
> > > >>
> > > >> Firstly, you must be install and start docker service.
> > > >> And then you could build Doris as following steps:
> > > >> Step1: Pull the docker image with Doris building environment
> > > >> $ docker pull apachedoris/doris-dev:build-env
> > > >>
> > > >> You can check it by listing images, for example:
> > > >> $ docker images
> > > >> REPOSITORY TAG IMAGE ID
> > CREATED
> > > >> SIZE
> > > >> apachedoris/doris-dev build-env f8bc5d4024e0 21
> > hours
> > > >> ago 3.28GB
> > > >>
> > > >> Step2: Run the Docker image
> > > >> You can run image directyly:
> > > >> $ docker run -it apachedoris/doris-dev:build-env
> > > >>
> > > >> Step3: Download Doris source
> > > >> Now you should in docker environment, and you can download Doris
> > source
> > > >>by
> > > >> release package or by git clone in image.
> > > >> (If you have downloaded source and it is not in image, you can map its
> > > >> path to image in Step2.)
> > > >> $ wget
> > https://dist.apache.org/repos/dist/dev/incubator/doris/xxx.tar.gz
> > > >>
> > > >> Step4: Build Doris
> > > >> Now you can enter Doris source path and build Doris.
> > > >> $ sh build.sh
> > > >> After successfully building, it will install binary files in the
> > > >>directory
> > > >> output/.
> > > >>
> > > >>
> > > >> Best Regards
> > > >> Reed
> > > >>
> > > >> On 2019/2/2 上午10:25， "Willem Jiang" <wi...@gmail.com> wrote:
> > > >>
> > > >> >Hi,
> > > >> >
> > > >> >It's good to see we have a docker build image to address source to
> > > >>binary
> > > >> >issue.
> > > >> >Is there any docker file or instruction of how to generate the docker
> > > >> >image? It can help us to verify the whole process.
> > > >> >
> > > >> >Willem Jiang
> > > >> >
> > > >> >Twitter: willemjiang
> > > >> >Weibo: 姜宁willem
> > > >> >
> > > >> >On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
> > > >> >>
> > > >> >> Hi all,
> > > >> >>
> > > >> >> Please review and vote on Apache Doris 0.9.0-incubating-rc02
> > release.
> > > >> >>
> > > >> >> The release candidate has been tagged in GitHub as 0.9.0-rc02,
> > > >>available
> > > >> >> here:
> > > >> >> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
> > > >> >>
> > > >> >> There is no CHANGE LOG file because this is the first release of
> > > >>Apache
> > > >> >> Doris.
> > > >> >> Thanks to everyone who has contributed to this release, and there
> > is
> > > >>a
> > > >> >> simple release notes can be found here:
> > > >> >> https://github.com/apache/incubator-doris/issues/406
> > > >> >>
> > > >> >> The artifacts (source, signature and checksum) corresponding to
> > this
> > > >> >>release
> > > >> >> candidate can be found here:
> > > >> >>
> > > >>
> > > >>>>
> > https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating
> > > >>>>-r
> > > >> >>c02
> > > >> >> /
> > > >> >>
> > > >> >> This has been signed with PGP key 33DBF2E0, corresponding to
> > > >> >> lide@apache.org.
> > > >> >> KEYS file is available here:
> > > >> >> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> > > >> >> It is also listed here:
> > > >> >> https://people.apache.org/keys/committer/lide.asc
> > > >> >>
> > > >> >> To verify and build, you can refer to following wiki:
> > > >> >>
> > > >>
> > > >>>>
> > https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Rel
> > > >>>>ea
> > > >> >>se
> > > >> >> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
> > > >> >>
> > > >> >> The vote will be open for at least 72 hours.
> > > >> >> [ ] +1 Approve the release
> > > >> >> [ ] +0 No opinion
> > > >> >> [ ] -1 Do not release this package because ...
> > > >> >>
> > > >> >> Best Regards,
> > > >> >> Reed
> > > >> >>
> > > >> >>
> > > >> >
> > > >> >---------------------------------------------------------------------
> > > >> >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> > > >> >For additional commands, e-mail: dev-help@doris.apache.org
> > > >> >
> > > >>
> > > >>
> > > >>
> > > >> ---------------------------------------------------------------------
> > > >> To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> > > >> For additional commands, e-mail: dev-help@doris.apache.org
> > > >>
> > > >
> > > >---------------------------------------------------------------------
> > > >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> > > >For additional commands, e-mail: dev-help@doris.apache.org
> > > >
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> > For additional commands, e-mail: dev-help@doris.apache.org
> >
> >
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
For additional commands, e-mail: dev-help@doris.apache.org
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by Zhao Chun <bu...@gmail.com>.
Hi, Willem
Because downloading some third-party source package is very slow and
sometimes maybe fail.
We put all third-party source packages in storage service which is located
in China
And that URL is the third-party packages'.
Thanks,
ZHAO Chun
Willem Jiang <wi...@gmail.com> 于2019年2月2日周六 上午11:00写道：
> Thanks for pointing that out. Here is a black box[1] I just found from
> the Dockerfile.
> Could you explain the detail of third party dependencies?
>
> [1]
> https://github.com/apache/incubator-doris/blob/master/docker/Dockerfile#L98
>
> Willem Jiang
>
> Twitter: willemjiang
> Weibo: 姜宁willem
>
> On Sat, Feb 2, 2019 at 10:45 AM Li,De(BDG) <li...@baidu.com> wrote:
> >
> > Hi,
> >
> > Yes, the Dockerfile is located in docker/Dockerfile of source package.
> >
> >
> > Reed
> >
> > On 2019/2/2 上午10:38， "Willem Jiang" <wi...@gmail.com> wrote:
> >
> > >Oh, I know how to use docker image to build the source code by going
> > >through the instruction.
> > >My question is how to build the build box image, can you point me the
> > >docker file of build-env?
> > >
> > >Willem Jiang
> > >
> > >Twitter: willemjiang
> > >Weibo: 姜宁willem
> > >
> > >On Sat, Feb 2, 2019 at 10:31 AM 德 李 <li...@apache.org> wrote:
> > >>
> > >> Hi Willem,
> > >>
> > >> Yes, we have an docker image, and following is the instruction for
> > >> building, thank you:
> > >>
> > >> Firstly, you must be install and start docker service.
> > >> And then you could build Doris as following steps:
> > >> Step1: Pull the docker image with Doris building environment
> > >> $ docker pull apachedoris/doris-dev:build-env
> > >>
> > >> You can check it by listing images, for example:
> > >> $ docker images
> > >> REPOSITORY TAG IMAGE ID
> CREATED
> > >> SIZE
> > >> apachedoris/doris-dev build-env f8bc5d4024e0 21
> hours
> > >> ago 3.28GB
> > >>
> > >> Step2: Run the Docker image
> > >> You can run image directyly:
> > >> $ docker run -it apachedoris/doris-dev:build-env
> > >>
> > >> Step3: Download Doris source
> > >> Now you should in docker environment, and you can download Doris
> source
> > >>by
> > >> release package or by git clone in image.
> > >> (If you have downloaded source and it is not in image, you can map its
> > >> path to image in Step2.)
> > >> $ wget
> https://dist.apache.org/repos/dist/dev/incubator/doris/xxx.tar.gz
> > >>
> > >> Step4: Build Doris
> > >> Now you can enter Doris source path and build Doris.
> > >> $ sh build.sh
> > >> After successfully building, it will install binary files in the
> > >>directory
> > >> output/.
> > >>
> > >>
> > >> Best Regards
> > >> Reed
> > >>
> > >> On 2019/2/2 上午10:25， "Willem Jiang" <wi...@gmail.com> wrote:
> > >>
> > >> >Hi,
> > >> >
> > >> >It's good to see we have a docker build image to address source to
> > >>binary
> > >> >issue.
> > >> >Is there any docker file or instruction of how to generate the docker
> > >> >image? It can help us to verify the whole process.
> > >> >
> > >> >Willem Jiang
> > >> >
> > >> >Twitter: willemjiang
> > >> >Weibo: 姜宁willem
> > >> >
> > >> >On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
> > >> >>
> > >> >> Hi all,
> > >> >>
> > >> >> Please review and vote on Apache Doris 0.9.0-incubating-rc02
> release.
> > >> >>
> > >> >> The release candidate has been tagged in GitHub as 0.9.0-rc02,
> > >>available
> > >> >> here:
> > >> >> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
> > >> >>
> > >> >> There is no CHANGE LOG file because this is the first release of
> > >>Apache
> > >> >> Doris.
> > >> >> Thanks to everyone who has contributed to this release, and there
> is
> > >>a
> > >> >> simple release notes can be found here:
> > >> >> https://github.com/apache/incubator-doris/issues/406
> > >> >>
> > >> >> The artifacts (source, signature and checksum) corresponding to
> this
> > >> >>release
> > >> >> candidate can be found here:
> > >> >>
> > >>
> > >>>>
> https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating
> > >>>>-r
> > >> >>c02
> > >> >> /
> > >> >>
> > >> >> This has been signed with PGP key 33DBF2E0, corresponding to
> > >> >> lide@apache.org.
> > >> >> KEYS file is available here:
> > >> >> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> > >> >> It is also listed here:
> > >> >> https://people.apache.org/keys/committer/lide.asc
> > >> >>
> > >> >> To verify and build, you can refer to following wiki:
> > >> >>
> > >>
> > >>>>
> https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Rel
> > >>>>ea
> > >> >>se
> > >> >> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
> > >> >>
> > >> >> The vote will be open for at least 72 hours.
> > >> >> [ ] +1 Approve the release
> > >> >> [ ] +0 No opinion
> > >> >> [ ] -1 Do not release this package because ...
> > >> >>
> > >> >> Best Regards,
> > >> >> Reed
> > >> >>
> > >> >>
> > >> >
> > >> >---------------------------------------------------------------------
> > >> >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> > >> >For additional commands, e-mail: dev-help@doris.apache.org
> > >> >
> > >>
> > >>
> > >>
> > >> ---------------------------------------------------------------------
> > >> To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> > >> For additional commands, e-mail: dev-help@doris.apache.org
> > >>
> > >
> > >---------------------------------------------------------------------
> > >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> > >For additional commands, e-mail: dev-help@doris.apache.org
> > >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> For additional commands, e-mail: dev-help@doris.apache.org
>
>
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by Willem Jiang <wi...@gmail.com>.
Thanks for pointing that out. Here is a black box[1] I just found from
the Dockerfile.
Could you explain the detail of third party dependencies?
[1]https://github.com/apache/incubator-doris/blob/master/docker/Dockerfile#L98
Willem Jiang
Twitter: willemjiang
Weibo: 姜宁willem
On Sat, Feb 2, 2019 at 10:45 AM Li,De(BDG) <li...@baidu.com> wrote:
>
> Hi,
>
> Yes, the Dockerfile is located in docker/Dockerfile of source package.
>
>
> Reed
>
> On 2019/2/2 上午10:38， "Willem Jiang" <wi...@gmail.com> wrote:
>
> >Oh, I know how to use docker image to build the source code by going
> >through the instruction.
> >My question is how to build the build box image, can you point me the
> >docker file of build-env?
> >
> >Willem Jiang
> >
> >Twitter: willemjiang
> >Weibo: 姜宁willem
> >
> >On Sat, Feb 2, 2019 at 10:31 AM 德 李 <li...@apache.org> wrote:
> >>
> >> Hi Willem,
> >>
> >> Yes, we have an docker image, and following is the instruction for
> >> building, thank you:
> >>
> >> Firstly, you must be install and start docker service.
> >> And then you could build Doris as following steps:
> >> Step1: Pull the docker image with Doris building environment
> >> $ docker pull apachedoris/doris-dev:build-env
> >>
> >> You can check it by listing images, for example:
> >> $ docker images
> >> REPOSITORY TAG IMAGE ID CREATED
> >> SIZE
> >> apachedoris/doris-dev build-env f8bc5d4024e0 21 hours
> >> ago 3.28GB
> >>
> >> Step2: Run the Docker image
> >> You can run image directyly:
> >> $ docker run -it apachedoris/doris-dev:build-env
> >>
> >> Step3: Download Doris source
> >> Now you should in docker environment, and you can download Doris source
> >>by
> >> release package or by git clone in image.
> >> (If you have downloaded source and it is not in image, you can map its
> >> path to image in Step2.)
> >> $ wget https://dist.apache.org/repos/dist/dev/incubator/doris/xxx.tar.gz
> >>
> >> Step4: Build Doris
> >> Now you can enter Doris source path and build Doris.
> >> $ sh build.sh
> >> After successfully building, it will install binary files in the
> >>directory
> >> output/.
> >>
> >>
> >> Best Regards
> >> Reed
> >>
> >> On 2019/2/2 上午10:25， "Willem Jiang" <wi...@gmail.com> wrote:
> >>
> >> >Hi,
> >> >
> >> >It's good to see we have a docker build image to address source to
> >>binary
> >> >issue.
> >> >Is there any docker file or instruction of how to generate the docker
> >> >image? It can help us to verify the whole process.
> >> >
> >> >Willem Jiang
> >> >
> >> >Twitter: willemjiang
> >> >Weibo: 姜宁willem
> >> >
> >> >On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
> >> >>
> >> >> Hi all,
> >> >>
> >> >> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
> >> >>
> >> >> The release candidate has been tagged in GitHub as 0.9.0-rc02,
> >>available
> >> >> here:
> >> >> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
> >> >>
> >> >> There is no CHANGE LOG file because this is the first release of
> >>Apache
> >> >> Doris.
> >> >> Thanks to everyone who has contributed to this release, and there is
> >>a
> >> >> simple release notes can be found here:
> >> >> https://github.com/apache/incubator-doris/issues/406
> >> >>
> >> >> The artifacts (source, signature and checksum) corresponding to this
> >> >>release
> >> >> candidate can be found here:
> >> >>
> >>
> >>>>https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating
> >>>>-r
> >> >>c02
> >> >> /
> >> >>
> >> >> This has been signed with PGP key 33DBF2E0, corresponding to
> >> >> lide@apache.org.
> >> >> KEYS file is available here:
> >> >> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> >> >> It is also listed here:
> >> >> https://people.apache.org/keys/committer/lide.asc
> >> >>
> >> >> To verify and build, you can refer to following wiki:
> >> >>
> >>
> >>>>https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Rel
> >>>>ea
> >> >>se
> >> >> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
> >> >>
> >> >> The vote will be open for at least 72 hours.
> >> >> [ ] +1 Approve the release
> >> >> [ ] +0 No opinion
> >> >> [ ] -1 Do not release this package because ...
> >> >>
> >> >> Best Regards,
> >> >> Reed
> >> >>
> >> >>
> >> >
> >> >---------------------------------------------------------------------
> >> >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> >> >For additional commands, e-mail: dev-help@doris.apache.org
> >> >
> >>
> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> >> For additional commands, e-mail: dev-help@doris.apache.org
> >>
> >
> >---------------------------------------------------------------------
> >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> >For additional commands, e-mail: dev-help@doris.apache.org
> >
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
For additional commands, e-mail: dev-help@doris.apache.org
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by "Li,De(BDG)" <li...@baidu.com>.
Hi,
Yes, the Dockerfile is located in docker/Dockerfile of source package.
Reed
On 2019/2/2 上午10:38， "Willem Jiang" <wi...@gmail.com> wrote:
>Oh, I know how to use docker image to build the source code by going
>through the instruction.
>My question is how to build the build box image, can you point me the
>docker file of build-env?
>
>Willem Jiang
>
>Twitter: willemjiang
>Weibo: 姜宁willem
>
>On Sat, Feb 2, 2019 at 10:31 AM 德 李 <li...@apache.org> wrote:
>>
>> Hi Willem,
>>
>> Yes, we have an docker image, and following is the instruction for
>> building, thank you:
>>
>> Firstly, you must be install and start docker service.
>> And then you could build Doris as following steps:
>> Step1: Pull the docker image with Doris building environment
>> $ docker pull apachedoris/doris-dev:build-env
>>
>> You can check it by listing images, for example:
>> $ docker images
>> REPOSITORY TAG IMAGE ID CREATED
>> SIZE
>> apachedoris/doris-dev build-env f8bc5d4024e0 21 hours
>> ago 3.28GB
>>
>> Step2: Run the Docker image
>> You can run image directyly:
>> $ docker run -it apachedoris/doris-dev:build-env
>>
>> Step3: Download Doris source
>> Now you should in docker environment, and you can download Doris source
>>by
>> release package or by git clone in image.
>> (If you have downloaded source and it is not in image, you can map its
>> path to image in Step2.)
>> $ wget https://dist.apache.org/repos/dist/dev/incubator/doris/xxx.tar.gz
>>
>> Step4: Build Doris
>> Now you can enter Doris source path and build Doris.
>> $ sh build.sh
>> After successfully building, it will install binary files in the
>>directory
>> output/.
>>
>>
>> Best Regards
>> Reed
>>
>> On 2019/2/2 上午10:25， "Willem Jiang" <wi...@gmail.com> wrote:
>>
>> >Hi,
>> >
>> >It's good to see we have a docker build image to address source to
>>binary
>> >issue.
>> >Is there any docker file or instruction of how to generate the docker
>> >image? It can help us to verify the whole process.
>> >
>> >Willem Jiang
>> >
>> >Twitter: willemjiang
>> >Weibo: 姜宁willem
>> >
>> >On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
>> >>
>> >> Hi all,
>> >>
>> >> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
>> >>
>> >> The release candidate has been tagged in GitHub as 0.9.0-rc02,
>>available
>> >> here:
>> >> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>> >>
>> >> There is no CHANGE LOG file because this is the first release of
>>Apache
>> >> Doris.
>> >> Thanks to everyone who has contributed to this release, and there is
>>a
>> >> simple release notes can be found here:
>> >> https://github.com/apache/incubator-doris/issues/406
>> >>
>> >> The artifacts (source, signature and checksum) corresponding to this
>> >>release
>> >> candidate can be found here:
>> >>
>>
>>>>https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating
>>>>-r
>> >>c02
>> >> /
>> >>
>> >> This has been signed with PGP key 33DBF2E0, corresponding to
>> >> lide@apache.org.
>> >> KEYS file is available here:
>> >> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
>> >> It is also listed here:
>> >> https://people.apache.org/keys/committer/lide.asc
>> >>
>> >> To verify and build, you can refer to following wiki:
>> >>
>>
>>>>https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Rel
>>>>ea
>> >>se
>> >> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>> >>
>> >> The vote will be open for at least 72 hours.
>> >> [ ] +1 Approve the release
>> >> [ ] +0 No opinion
>> >> [ ] -1 Do not release this package because ...
>> >>
>> >> Best Regards,
>> >> Reed
>> >>
>> >>
>> >
>> >---------------------------------------------------------------------
>> >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>> >For additional commands, e-mail: dev-help@doris.apache.org
>> >
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>> For additional commands, e-mail: dev-help@doris.apache.org
>>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>For additional commands, e-mail: dev-help@doris.apache.org
>
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by Willem Jiang <wi...@gmail.com>.
Oh, I know how to use docker image to build the source code by going
through the instruction.
My question is how to build the build box image, can you point me the
docker file of build-env?
Willem Jiang
Twitter: willemjiang
Weibo: 姜宁willem
On Sat, Feb 2, 2019 at 10:31 AM 德 李 <li...@apache.org> wrote:
>
> Hi Willem,
>
> Yes, we have an docker image, and following is the instruction for
> building, thank you:
>
> Firstly, you must be install and start docker service.
> And then you could build Doris as following steps:
> Step1: Pull the docker image with Doris building environment
> $ docker pull apachedoris/doris-dev:build-env
>
> You can check it by listing images, for example:
> $ docker images
> REPOSITORY TAG IMAGE ID CREATED
> SIZE
> apachedoris/doris-dev build-env f8bc5d4024e0 21 hours
> ago 3.28GB
>
> Step2: Run the Docker image
> You can run image directyly:
> $ docker run -it apachedoris/doris-dev:build-env
>
> Step3: Download Doris source
> Now you should in docker environment, and you can download Doris source by
> release package or by git clone in image.
> (If you have downloaded source and it is not in image, you can map its
> path to image in Step2.)
> $ wget https://dist.apache.org/repos/dist/dev/incubator/doris/xxx.tar.gz
>
> Step4: Build Doris
> Now you can enter Doris source path and build Doris.
> $ sh build.sh
> After successfully building, it will install binary files in the directory
> output/.
>
>
> Best Regards
> Reed
>
> On 2019/2/2 上午10:25， "Willem Jiang" <wi...@gmail.com> wrote:
>
> >Hi,
> >
> >It's good to see we have a docker build image to address source to binary
> >issue.
> >Is there any docker file or instruction of how to generate the docker
> >image? It can help us to verify the whole process.
> >
> >Willem Jiang
> >
> >Twitter: willemjiang
> >Weibo: 姜宁willem
> >
> >On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
> >>
> >> Hi all,
> >>
> >> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
> >>
> >> The release candidate has been tagged in GitHub as 0.9.0-rc02, available
> >> here:
> >> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
> >>
> >> There is no CHANGE LOG file because this is the first release of Apache
> >> Doris.
> >> Thanks to everyone who has contributed to this release, and there is a
> >> simple release notes can be found here:
> >> https://github.com/apache/incubator-doris/issues/406
> >>
> >> The artifacts (source, signature and checksum) corresponding to this
> >>release
> >> candidate can be found here:
> >>
> >>https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-r
> >>c02
> >> /
> >>
> >> This has been signed with PGP key 33DBF2E0, corresponding to
> >> lide@apache.org.
> >> KEYS file is available here:
> >> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> >> It is also listed here:
> >> https://people.apache.org/keys/committer/lide.asc
> >>
> >> To verify and build, you can refer to following wiki:
> >>
> >>https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Relea
> >>se
> >> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
> >>
> >> The vote will be open for at least 72 hours.
> >> [ ] +1 Approve the release
> >> [ ] +0 No opinion
> >> [ ] -1 Do not release this package because ...
> >>
> >> Best Regards,
> >> Reed
> >>
> >>
> >
> >---------------------------------------------------------------------
> >To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> >For additional commands, e-mail: dev-help@doris.apache.org
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
> For additional commands, e-mail: dev-help@doris.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
For additional commands, e-mail: dev-help@doris.apache.org
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by 德 李 <li...@apache.org>.
Hi Willem,
Yes, we have an docker image, and following is the instruction for
building, thank you:
Firstly, you must be install and start docker service.
And then you could build Doris as following steps:
Step1: Pull the docker image with Doris building environment
$ docker pull apachedoris/doris-dev:build-env
You can check it by listing images, for example:
$ docker images
REPOSITORY TAG IMAGE ID CREATED
SIZE
apachedoris/doris-dev build-env f8bc5d4024e0 21 hours
ago 3.28GB
Step2: Run the Docker image
You can run image directyly:
$ docker run -it apachedoris/doris-dev:build-env
Step3: Download Doris source
Now you should in docker environment, and you can download Doris source by
release package or by git clone in image.
(If you have downloaded source and it is not in image, you can map its
path to image in Step2.)
$ wget https://dist.apache.org/repos/dist/dev/incubator/doris/xxx.tar.gz
Step4: Build Doris
Now you can enter Doris source path and build Doris.
$ sh build.sh
After successfully building, it will install binary files in the directory
output/.
Best Regards
Reed
On 2019/2/2 上午10:25， "Willem Jiang" <wi...@gmail.com> wrote:
>Hi,
>
>It's good to see we have a docker build image to address source to binary
>issue.
>Is there any docker file or instruction of how to generate the docker
>image? It can help us to verify the whole process.
>
>Willem Jiang
>
>Twitter: willemjiang
>Weibo: 姜宁willem
>
>On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
>>
>> Hi all,
>>
>> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
>>
>> The release candidate has been tagged in GitHub as 0.9.0-rc02, available
>> here:
>> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>>
>> There is no CHANGE LOG file because this is the first release of Apache
>> Doris.
>> Thanks to everyone who has contributed to this release, and there is a
>> simple release notes can be found here:
>> https://github.com/apache/incubator-doris/issues/406
>>
>> The artifacts (source, signature and checksum) corresponding to this
>>release
>> candidate can be found here:
>>
>>https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-r
>>c02
>> /
>>
>> This has been signed with PGP key 33DBF2E0, corresponding to
>> lide@apache.org.
>> KEYS file is available here:
>> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
>> It is also listed here:
>> https://people.apache.org/keys/committer/lide.asc
>>
>> To verify and build, you can refer to following wiki:
>>
>>https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Relea
>>se
>> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>>
>> The vote will be open for at least 72 hours.
>> [ ] +1 Approve the release
>> [ ] +0 No opinion
>> [ ] -1 Do not release this package because ...
>>
>> Best Regards,
>> Reed
>>
>>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
>For additional commands, e-mail: dev-help@doris.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
For additional commands, e-mail: dev-help@doris.apache.org
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by Willem Jiang <wi...@gmail.com>.
Hi,
It's good to see we have a docker build image to address source to binary issue.
Is there any docker file or instruction of how to generate the docker
image? It can help us to verify the whole process.
Willem Jiang
Twitter: willemjiang
Weibo: 姜宁willem
On Fri, Feb 1, 2019 at 4:25 PM 德 李 <li...@apache.org> wrote:
>
> Hi all,
>
> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
>
> The release candidate has been tagged in GitHub as 0.9.0-rc02, available
> here:
> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>
> There is no CHANGE LOG file because this is the first release of Apache
> Doris.
> Thanks to everyone who has contributed to this release, and there is a
> simple release notes can be found here:
> https://github.com/apache/incubator-doris/issues/406
>
> The artifacts (source, signature and checksum) corresponding to this release
> candidate can be found here:
> https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-rc02
> /
>
> This has been signed with PGP key 33DBF2E0, corresponding to
> lide@apache.org.
> KEYS file is available here:
> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> It is also listed here:
> https://people.apache.org/keys/committer/lide.asc
>
> To verify and build, you can refer to following wiki:
> https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Release
> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>
> The vote will be open for at least 72 hours.
> [ ] +1 Approve the release
> [ ] +0 No opinion
> [ ] -1 Do not release this package because ...
>
> Best Regards,
> Reed
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
For additional commands, e-mail: dev-help@doris.apache.org
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by "Li,Chaoyong" <li...@baidu.com>.
+1
I have checked
1. download release from apache dist
2. check incubating in release name
3. check signature and hashes
4. check DISCLAIMER file
5. check LICENSE and NOTICE files
6. check all source files have ASF headers
7. check there is no binary file
8. build successfully in docker environment
Thanks,
Li Chaoyong
在 2019/2/7 下午7:38，“MingyuChen”<mo...@163.com> 写入:
+1
I have checked this release package by following steps
1. download release from apache dist
2. check its signature and hashes
3. check the DISCLAIMER, LICENSE and NOTICE files, and all files with ASF headers.
4. check there is no binary file
5. build successfully by using docker images.
> 在 2019年2月1日，下午4:25，德 李 <li...@apache.org> 写道：
>
> Hi all,
>
> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
>
> The release candidate has been tagged in GitHub as 0.9.0-rc02, available
> here:
> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>
> There is no CHANGE LOG file because this is the first release of Apache
> Doris.
> Thanks to everyone who has contributed to this release, and there is a
> simple release notes can be found here:
> https://github.com/apache/incubator-doris/issues/406
>
> The artifacts (source, signature and checksum) corresponding to this release
> candidate can be found here:
> https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-rc02
> /
>
> This has been signed with PGP key 33DBF2E0, corresponding to
> lide@apache.org.
> KEYS file is available here:
> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> It is also listed here:
> https://people.apache.org/keys/committer/lide.asc
>
> To verify and build, you can refer to following wiki:
> https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Release
> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>
> The vote will be open for at least 72 hours.
> [ ] +1 Approve the release
> [ ] +0 No opinion
> [ ] -1 Do not release this package because ...
>
> Best Regards,
> Reed
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
For additional commands, e-mail: dev-help@doris.apache.org
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by MingyuChen <mo...@163.com>.
+1
I have checked this release package by following steps
1. download release from apache dist
2. check its signature and hashes
3. check the DISCLAIMER, LICENSE and NOTICE files, and all files with ASF headers.
4. check there is no binary file
5. build successfully by using docker images.
> 在 2019年2月1日，下午4:25，德 李 <li...@apache.org> 写道：
>
> Hi all,
>
> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
>
> The release candidate has been tagged in GitHub as 0.9.0-rc02, available
> here:
> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>
> There is no CHANGE LOG file because this is the first release of Apache
> Doris.
> Thanks to everyone who has contributed to this release, and there is a
> simple release notes can be found here:
> https://github.com/apache/incubator-doris/issues/406
>
> The artifacts (source, signature and checksum) corresponding to this release
> candidate can be found here:
> https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-rc02
> /
>
> This has been signed with PGP key 33DBF2E0, corresponding to
> lide@apache.org.
> KEYS file is available here:
> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> It is also listed here:
> https://people.apache.org/keys/committer/lide.asc
>
> To verify and build, you can refer to following wiki:
> https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Release
> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>
> The vote will be open for at least 72 hours.
> [ ] +1 Approve the release
> [ ] +0 No opinion
> [ ] -1 Do not release this package because ...
>
> Best Regards,
> Reed
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@doris.apache.org
For additional commands, e-mail: dev-help@doris.apache.org
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by "Li,De(BDG)" <li...@baidu.com>.
+1
I have checked:
1. Download links are valid.
2. Checksums and PGP signatures are OK.
3. DISCLAIMER is included.
4. Source code artifacts have correct names matching the current release.
5. LICENSE and NOTICE files are corrected.
6. All source files have license headers.
7. Build from source are OK in Docker environment.
Best Regards,
Reed
On 2019/2/1 下午8:57， "Zhao Chun" <bu...@gmail.com> wrote:
>+1
>
>I have checked
>
>1. download release from apache dist
>2. check incubating in release name
>3. check signature and hashes
>4. check DISCLAIMER file
>5. check LICENSE and NOTICE files
>6. check all source files have ASF headers
>7. check there is no binary file
>8. build successfully in docker environment
>
>Thanks,
>ZHAO Chun
>
>
>
>德 李 <li...@apache.org> 于2019年2月1日周五 下午4:25写道：
>
>> Hi all,
>>
>> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
>>
>> The release candidate has been tagged in GitHub as 0.9.0-rc02, available
>> here:
>> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>>
>> There is no CHANGE LOG file because this is the first release of Apache
>> Doris.
>> Thanks to everyone who has contributed to this release, and there is a
>> simple release notes can be found here:
>> https://github.com/apache/incubator-doris/issues/406
>>
>> The artifacts (source, signature and checksum) corresponding to this
>> release
>> candidate can be found here:
>>
>>
>>https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-r
>>c02
>> /
>>
>> This has been signed with PGP key 33DBF2E0, corresponding to
>> lide@apache.org.
>> KEYS file is available here:
>> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
>> It is also listed here:
>> https://people.apache.org/keys/committer/lide.asc
>>
>> To verify and build, you can refer to following wiki:
>>
>>https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Relea
>>se
>> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>>
>> The vote will be open for at least 72 hours.
>> [ ] +1 Approve the release
>> [ ] +0 No opinion
>> [ ] -1 Do not release this package because ...
>>
>> Best Regards,
>> Reed
>>
>>
>>
Re: [VOTE] Release Apache Doris 0.9.0-incubating-rc02
Posted by Zhao Chun <bu...@gmail.com>.
+1
I have checked
1. download release from apache dist
2. check incubating in release name
3. check signature and hashes
4. check DISCLAIMER file
5. check LICENSE and NOTICE files
6. check all source files have ASF headers
7. check there is no binary file
8. build successfully in docker environment
Thanks,
ZHAO Chun
德 李 <li...@apache.org> 于2019年2月1日周五 下午4:25写道：
> Hi all,
>
> Please review and vote on Apache Doris 0.9.0-incubating-rc02 release.
>
> The release candidate has been tagged in GitHub as 0.9.0-rc02, available
> here:
> https://github.com/apache/incubator-doris/releases/tag/0.9.0-rc02
>
> There is no CHANGE LOG file because this is the first release of Apache
> Doris.
> Thanks to everyone who has contributed to this release, and there is a
> simple release notes can be found here:
> https://github.com/apache/incubator-doris/issues/406
>
> The artifacts (source, signature and checksum) corresponding to this
> release
> candidate can be found here:
>
> https://dist.apache.org/repos/dist/dev/incubator/doris/0.9.0-incubating-rc02
> /
>
> This has been signed with PGP key 33DBF2E0, corresponding to
> lide@apache.org.
> KEYS file is available here:
> https://dist.apache.org/repos/dist/dev/incubator/doris/KEYS
> It is also listed here:
> https://people.apache.org/keys/committer/lide.asc
>
> To verify and build, you can refer to following wiki:
> https://github.com/apache/incubator-doris/wiki/How-to-verify-Apache-Release
> https://wiki.apache.org/incubator/IncubatorReleaseChecklist
>
> The vote will be open for at least 72 hours.
> [ ] +1 Approve the release
> [ ] +0 No opinion
> [ ] -1 Do not release this package because ...
>
> Best Regards,
> Reed
>
>
>