You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Luke Camilleri <lu...@zylacomputing.com> on 2018/01/06 11:17:49 UTC
new kvm setup storage pool
Hello everyone, I am following the guide to setup CS 4.10 with kvm hosts. Upon adding my first zone at the add host step it fails and the following is shown in the logs:
2018-01-06 12:06:13,460 ERROR [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) org.libvirt.LibvirtException: XML error: missing pool source name element
In the installation guide there is no mentioning of generating uuid's for hosts or storage but it might have been sjipped by mistake or I am doing something wrong here.
Can anyone one please let me know what is going on??
Thanks
RE: new kvm setup storage pool
Posted by Luke Camilleri <lu...@zylacomputing.com>.
Hi Simon thanks for your reply, so fresh 4.9.3 install of ACS management server and fresh install of kvm host, started and configured libvirt and started cs-agent just before I configured the first zone:
#tail -f agent.log
2018-01-07 00:46:17,410 INFO [utils.nio.NioClient] (Agent Timer:null) (logid:) Connecting to 172.16.10.5:8250
2018-01-07 00:46:17,522 INFO [utils.nio.NioClient] (Agent Timer:null) (logid:) SSL: Handshake done
2018-01-07 00:46:17,522 INFO [utils.nio.NioClient] (Agent Timer:null) (logid:) Connected to 172.16.10.5:8250
2018-01-07 00:46:17,526 WARN [kvm.resource.LibvirtComputingResource] (Agent-Handler-1:null) (logid:) Could not read cpuinfo_max_freq
2018-01-07 00:46:17,612 INFO [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) Attempting to create storage pool (Filesystem) in libvirt
2018-01-07 00:46:17,614 WARN [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) Storage pool was not found running in libvirt. Need to create it.
2018-01-07 00:46:17,614 INFO [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) Didn't find an existing storage pool by UUID, checking for pools with duplicate paths
2018-01-07 00:46:17,616 ERROR [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) org.libvirt.LibvirtException: XML error: missing pool source name element
2018-01-07 00:46:18,234 INFO [cloud.agent.Agent] (Agent-Handler-2:null) (logid:) Proccess agent startup answer, agent id = 0
2018-01-07 00:46:18,235 INFO [cloud.agent.Agent] (Agent-Handler-2:null) (logid:) Set agent id 0
2018-01-07 00:46:18,243 INFO [cloud.agent.Agent] (AgentShutdownThread:null) (logid:) Stopping the agent: Reason = sig.killVirsh pool-list is empty
Wizard fails with:
Something went wrong; please correct the following:
Unable to add the host
Which is obvious as the agent process seems to be stopped. Clicked on the "fix errors" button in the GUI and restarted the agent and I am now presented with the below error, but:
Something went wrong; please correct the following:
Guid is not updated for cluster with specified cluster id; need to wait for hosts in this cluster to come up
#tail -f agent.log
2018-01-07 00:58:13,320 INFO [utils.nio.NioClient] (main:null) (logid:) Connecting to 172.16.10.5:8250
2018-01-07 00:58:13,521 INFO [utils.nio.NioClient] (main:null) (logid:) SSL: Handshake done
2018-01-07 00:58:13,521 INFO [utils.nio.NioClient] (main:null) (logid:) Connected to 172.16.10.5:8250
2018-01-07 00:58:13,530 WARN [kvm.resource.LibvirtComputingResource] (Agent-Handler-1:null) (logid:) Could not read cpuinfo_max_freq
2018-01-07 00:58:13,618 INFO [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) Attempting to create storage pool 2ee07eab-3791-44b2-bed5-a516139142d7 (Filesystem) in libvirt
2018-01-07 00:58:13,623 WARN [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) Storage pool 2ee07eab-3791-44b2-bed5-a516139142d7 was not found running in libvirt. Need to create it.
2018-01-07 00:58:13,623 INFO [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) Didn't find an existing storage pool 2ee07eab-3791-44b2-bed5-a516139142d7 by UUID, checking for pools with duplicate paths
2018-01-07 00:58:13,628 INFO [kvm.storage.LibvirtStorageAdaptor] (Agent-Handler-1:null) (logid:) Trying to fetch storage pool 2ee07eab-3791-44b2-bed5-a516139142d7 from libvirt
2018-01-07 00:58:13,677 INFO [cloud.serializer.GsonHelper] (Agent-Handler-1:null) (logid:) Default Builder inited.
#virsh pool-list
Name State Autostart
-------------------------------------------
2ee07eab-3791-44b2-bed5-a516139142d7 active no
And /etc/cloudstack/agent/agent.properties file has been populated with the below 2 fields:
guid=1011d539-a2a9-3e89-a79c-281a1452f36d
local.storage.uuid=2ee07eab-3791-44b2-bed5-a516139142d7
Cancelling the wizard will now take me to the infrastructure dashboard and the host is in fact added and I can continue with adding storage and instances. Future hosts will not have this problem as I now know the primary storage id which I can add in the agent.properties file but I would like to complete this procedure in a better way and also to update the official documentation with the correct steps
Thanks in advance for any help
-----Original Message-----
From: Simon Weller [mailto:sweller@ena.com.INVALID]
Sent: 06 January 2018 23:09
To: users@cloudstack.apache.org
Subject: Re: new kvm setup storage pool
On the subject of the xml error, make sure libvirt is being started before the cloudstack agent. The cloudstack agent talks to libvirt and will inject the storage pools. You can test this by restarting libvirt, do a virsh pool-list, then restart the cloudstack-agent and do another virsh pool-list and compare the two. If the agent is setup correctly, you should see your storage pool.
- Si
________________________________
From: Luke Camilleri <lu...@zylacomputing.com>
Sent: Saturday, January 6, 2018 10:06 AM
To: users@cloudstack.apache.org
Subject: RE: new kvm setup storage pool
Thanks Ivan, will test with 4.9.3 and let you know
Regards
-----Original Message-----
From: Ivan Kudryavtsev [mailto:kudryavtsev_ia@bw-sw.com]
Sent: 06 January 2018 12:37
To: users@cloudstack.apache.org
Subject: Re: new kvm setup storage pool
Hi, Luke. Don't recommend using 4.10, use 4.9.3 because it's stable and battle proven. 4.10 is very buggy.
6 янв. 2018 г. 18:17 пользователь "Luke Camilleri" < luke.camilleri@zylacomputing.com> написал:
> Hello everyone, I am following the guide to setup CS 4.10 with kvm hosts.
> Upon adding my first zone at the add host step it fails and the
> following is shown in the logs:
>
> 2018-01-06 12:06:13,460 ERROR [kvm.storage.LibvirtStorageAdaptor]
> (Agent-Handler-1:null) (logid:) org.libvirt.LibvirtException: XML error:
> missing pool source name element
>
> In the installation guide there is no mentioning of generating uuid's
> for hosts or storage but it might have been sjipped by mistake or I am
> doing something wrong here.
>
> Can anyone one please let me know what is going on??
>
> Thanks
>
Re: new kvm setup storage pool
Posted by Simon Weller <sw...@ena.com.INVALID>.
On the subject of the xml error, make sure libvirt is being started before the cloudstack agent. The cloudstack agent talks to libvirt and will inject the storage pools. You can test this by restarting libvirt, do a virsh pool-list, then restart the cloudstack-agent and do another virsh pool-list and compare the two. If the agent is setup correctly, you should see your storage pool.
- Si
________________________________
From: Luke Camilleri <lu...@zylacomputing.com>
Sent: Saturday, January 6, 2018 10:06 AM
To: users@cloudstack.apache.org
Subject: RE: new kvm setup storage pool
Thanks Ivan, will test with 4.9.3 and let you know
Regards
-----Original Message-----
From: Ivan Kudryavtsev [mailto:kudryavtsev_ia@bw-sw.com]
Sent: 06 January 2018 12:37
To: users@cloudstack.apache.org
Subject: Re: new kvm setup storage pool
Hi, Luke. Don't recommend using 4.10, use 4.9.3 because it's stable and battle proven. 4.10 is very buggy.
6 янв. 2018 г. 18:17 пользователь "Luke Camilleri" < luke.camilleri@zylacomputing.com> написал:
> Hello everyone, I am following the guide to setup CS 4.10 with kvm hosts.
> Upon adding my first zone at the add host step it fails and the
> following is shown in the logs:
>
> 2018-01-06 12:06:13,460 ERROR [kvm.storage.LibvirtStorageAdaptor]
> (Agent-Handler-1:null) (logid:) org.libvirt.LibvirtException: XML error:
> missing pool source name element
>
> In the installation guide there is no mentioning of generating uuid's
> for hosts or storage but it might have been sjipped by mistake or I am
> doing something wrong here.
>
> Can anyone one please let me know what is going on??
>
> Thanks
>
RE: new kvm setup storage pool
Posted by Luke Camilleri <lu...@zylacomputing.com>.
Thanks Ivan, will test with 4.9.3 and let you know
Regards
-----Original Message-----
From: Ivan Kudryavtsev [mailto:kudryavtsev_ia@bw-sw.com]
Sent: 06 January 2018 12:37
To: users@cloudstack.apache.org
Subject: Re: new kvm setup storage pool
Hi, Luke. Don't recommend using 4.10, use 4.9.3 because it's stable and battle proven. 4.10 is very buggy.
6 янв. 2018 г. 18:17 пользователь "Luke Camilleri" < luke.camilleri@zylacomputing.com> написал:
> Hello everyone, I am following the guide to setup CS 4.10 with kvm hosts.
> Upon adding my first zone at the add host step it fails and the
> following is shown in the logs:
>
> 2018-01-06 12:06:13,460 ERROR [kvm.storage.LibvirtStorageAdaptor]
> (Agent-Handler-1:null) (logid:) org.libvirt.LibvirtException: XML error:
> missing pool source name element
>
> In the installation guide there is no mentioning of generating uuid's
> for hosts or storage but it might have been sjipped by mistake or I am
> doing something wrong here.
>
> Can anyone one please let me know what is going on??
>
> Thanks
>
Re: new kvm setup storage pool
Posted by Ivan Kudryavtsev <ku...@bw-sw.com>.
Hi, Luke. Don't recommend using 4.10, use 4.9.3 because it's stable and
battle proven. 4.10 is very buggy.
6 янв. 2018 г. 18:17 пользователь "Luke Camilleri" <
luke.camilleri@zylacomputing.com> написал:
> Hello everyone, I am following the guide to setup CS 4.10 with kvm hosts.
> Upon adding my first zone at the add host step it fails and the following
> is shown in the logs:
>
> 2018-01-06 12:06:13,460 ERROR [kvm.storage.LibvirtStorageAdaptor]
> (Agent-Handler-1:null) (logid:) org.libvirt.LibvirtException: XML error:
> missing pool source name element
>
> In the installation guide there is no mentioning of generating uuid's for
> hosts or storage but it might have been sjipped by mistake or I am doing
> something wrong here.
>
> Can anyone one please let me know what is going on??
>
> Thanks
>