You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@ignite.apache.org by I PVP <ip...@hotmail.com> on 2017/05/27 14:19:14 UTC

ignitevisor starting the node twice

Does ignitevisorcmd.sh starts the node or is it a management interface?

Why ignitevisorcmd.sh behaves like if Ignite was not started and  does not see the cache that was created?

ignite.sh starts fine. But,  when I start ignitevisorcmd.sh and type the open command  it asks me for the configuration file and  even informing the same configuration file used to start ignite   ignitevisor  says:  "Ignite node started OK”  ,  it shows 00:00:00 uptime and the cache command says "(wrn) <visor>: No caches found."

Ignite is being started with "ignite.sh config/ignite-config.xml”

ignite-config.xml has the following content:

-----
<?xml version="1.0" encoding="UTF-8”?>

<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="
       http://www.springframework.org/schema/beans
       http://www.springframework.org/schema/beans/spring-beans.xsd”>

<bean id="ignite.cfg" class="org.apache.ignite.configuration.IgniteConfiguration">
   <property name="cacheConfiguration">
      <list>
         <bean class="org.apache.ignite.configuration.CacheConfiguration">
            <!-- Cache name. -->
            <property name="name" value="websession" />
            <property name="cacheMode" value="PARTITIONED" />
            <property name="backups" value="1" />
 </bean>
      </list>
   </property>
</bean>

</beans>
-----

Thanks
 IPVP


Re: ignitevisor starting the node twice

Posted by Alexey Kuznetsov <ak...@apache.org>.
Matt,

Could you share more details?
I think it is possible that "invisible / daemon node" could store some
state...
But We need a reproducible example.

On Tue, May 30, 2017 at 1:10 PM, Matt <dr...@gmail.com> wrote:

> Based on experience I would say that that "invisible node" is not
> completely transparent to the rest of the nodes. I'm not quite sure when or
> how, but I've seen it changes the behavior of the other nodes sometimes.
>
> I haven't payed much attention to this (I will next time) but may it be
> that it keeps some state even when all other nodes are down?
>
> I'm guessing that it keeps alive classes that were loaded using peer class
> loading (with default config), and when we relaunch some real nodes the
> state of the grid is not completely pristine.
>
> Not sure if that in particular is the case, but I've seen some weird
> things when visor is running.
>
> Matt
>
> On Mon, May 29, 2017 at 11:18 PM, Alexey Kuznetsov <ak...@apache.org>
> wrote:
>
>> You need to open configuration with proper discovery.
>> Usually that means - open same config you used to start your "real" nodes.
>>
>> On Tue, May 30, 2017 at 8:45 AM, I PVP <ip...@hotmail.com> wrote:
>>
>>> Alexey,
>>>
>>> Thanks for answering.
>>>
>>> How do I make  ignitevisorcmd.sh  see my “real” node(s) ?
>>>
>>> best,
>>>
>>> IPVP
>>>
>>> On May 29, 2017 at 10:39:41 PM, Alexey Kuznetsov (akuznetsov@apache.org)
>>> wrote:
>>>
>>> Hi, IPVP.
>>>
>>> Yes,  ignitevisorcmd.sh starts internal node in "daemon" mode.
>>> This node is "invisible" for other nodes and doe not have caches data
>>> and does not participate in compute task executions.
>>>
>>> See: IgniteConfiguration#setDaemon javadocs for more info.
>>>
>>> On Sat, May 27, 2017 at 9:19 PM, I PVP <ip...@hotmail.com> wrote:
>>>
>>>> Does ignitevisorcmd.sh starts the node or is it a management interface?
>>>>
>>>> Why ignitevisorcmd.sh behaves like if Ignite was not started and  does
>>>> not see the cache that was created?
>>>>
>>>> ignite.sh starts fine. But,  when I start ignitevisorcmd.sh and type
>>>> the open command  it asks me for the configuration file and  even informing
>>>> the same configuration file used to start ignite   ignitevisor  says:
>>>>  "Ignite node started OK”  ,  it shows 00:00:00 uptime and the cache
>>>> command says "(wrn) <visor>: No caches found."
>>>>
>>>> Ignite is being started with "ignite.sh config/ignite-config.xml”
>>>>
>>>> ignite-config.xml has the following content:
>>>>
>>>> -----
>>>> <?xml version="1.0" encoding="UTF-8”?>
>>>>
>>>> <beans xmlns="http://www.springframework.org/schema/beans"
>>>>        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>>>>        xsi:schemaLocation="
>>>>        http://www.springframework.org/schema/beans
>>>>        http://www.springframework.org/schema/beans/spring-beans.xsd”>
>>>>
>>>> <bean id="ignite.cfg" class="org.apache.ignite.confi
>>>> guration.IgniteConfiguration">
>>>>    <property name="cacheConfiguration">
>>>>       <list>
>>>>          <bean class="org.apache.ignite.confi
>>>> guration.CacheConfiguration">
>>>>             <!-- Cache name. -->
>>>>             <property name="name" value="websession" />
>>>>             <property name="cacheMode" value="PARTITIONED" />
>>>>             <property name="backups" value="1" />
>>>>  </bean>
>>>>       </list>
>>>>    </property>
>>>> </bean>
>>>>
>>>> </beans>
>>>> -----
>>>>
>>>> Thanks
>>>>  IPVP
>>>>
>>>>
>>>
>>>
>>> --
>>> Alexey Kuznetsov
>>>
>>>
>>
>>
>> --
>> Alexey Kuznetsov
>>
>
>


-- 
Alexey Kuznetsov

Re: ignitevisor starting the node twice

Posted by Matt <dr...@gmail.com>.
Based on experience I would say that that "invisible node" is not
completely transparent to the rest of the nodes. I'm not quite sure when or
how, but I've seen it changes the behavior of the other nodes sometimes.

I haven't payed much attention to this (I will next time) but may it be
that it keeps some state even when all other nodes are down?

I'm guessing that it keeps alive classes that were loaded using peer class
loading (with default config), and when we relaunch some real nodes the
state of the grid is not completely pristine.

Not sure if that in particular is the case, but I've seen some weird things
when visor is running.

Matt

On Mon, May 29, 2017 at 11:18 PM, Alexey Kuznetsov <ak...@apache.org>
wrote:

> You need to open configuration with proper discovery.
> Usually that means - open same config you used to start your "real" nodes.
>
> On Tue, May 30, 2017 at 8:45 AM, I PVP <ip...@hotmail.com> wrote:
>
>> Alexey,
>>
>> Thanks for answering.
>>
>> How do I make  ignitevisorcmd.sh  see my “real” node(s) ?
>>
>> best,
>>
>> IPVP
>>
>> On May 29, 2017 at 10:39:41 PM, Alexey Kuznetsov (akuznetsov@apache.org)
>> wrote:
>>
>> Hi, IPVP.
>>
>> Yes,  ignitevisorcmd.sh starts internal node in "daemon" mode.
>> This node is "invisible" for other nodes and doe not have caches data and
>> does not participate in compute task executions.
>>
>> See: IgniteConfiguration#setDaemon javadocs for more info.
>>
>> On Sat, May 27, 2017 at 9:19 PM, I PVP <ip...@hotmail.com> wrote:
>>
>>> Does ignitevisorcmd.sh starts the node or is it a management interface?
>>>
>>> Why ignitevisorcmd.sh behaves like if Ignite was not started and  does
>>> not see the cache that was created?
>>>
>>> ignite.sh starts fine. But,  when I start ignitevisorcmd.sh and type the
>>> open command  it asks me for the configuration file and  even informing the
>>> same configuration file used to start ignite   ignitevisor  says:  "Ignite
>>> node started OK”  ,  it shows 00:00:00 uptime and the cache command says
>>> "(wrn) <visor>: No caches found."
>>>
>>> Ignite is being started with "ignite.sh config/ignite-config.xml”
>>>
>>> ignite-config.xml has the following content:
>>>
>>> -----
>>> <?xml version="1.0" encoding="UTF-8”?>
>>>
>>> <beans xmlns="http://www.springframework.org/schema/beans"
>>>        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>>>        xsi:schemaLocation="
>>>        http://www.springframework.org/schema/beans
>>>        http://www.springframework.org/schema/beans/spring-beans.xsd”>
>>>
>>> <bean id="ignite.cfg" class="org.apache.ignite.confi
>>> guration.IgniteConfiguration">
>>>    <property name="cacheConfiguration">
>>>       <list>
>>>          <bean class="org.apache.ignite.confi
>>> guration.CacheConfiguration">
>>>             <!-- Cache name. -->
>>>             <property name="name" value="websession" />
>>>             <property name="cacheMode" value="PARTITIONED" />
>>>             <property name="backups" value="1" />
>>>  </bean>
>>>       </list>
>>>    </property>
>>> </bean>
>>>
>>> </beans>
>>> -----
>>>
>>> Thanks
>>>  IPVP
>>>
>>>
>>
>>
>> --
>> Alexey Kuznetsov
>>
>>
>
>
> --
> Alexey Kuznetsov
>

Re: ignitevisor starting the node twice

Posted by Alexey Kuznetsov <ak...@apache.org>.
You need to open configuration with proper discovery.
Usually that means - open same config you used to start your "real" nodes.

On Tue, May 30, 2017 at 8:45 AM, I PVP <ip...@hotmail.com> wrote:

> Alexey,
>
> Thanks for answering.
>
> How do I make  ignitevisorcmd.sh  see my “real” node(s) ?
>
> best,
>
> IPVP
>
> On May 29, 2017 at 10:39:41 PM, Alexey Kuznetsov (akuznetsov@apache.org)
> wrote:
>
> Hi, IPVP.
>
> Yes,  ignitevisorcmd.sh starts internal node in "daemon" mode.
> This node is "invisible" for other nodes and doe not have caches data and
> does not participate in compute task executions.
>
> See: IgniteConfiguration#setDaemon javadocs for more info.
>
> On Sat, May 27, 2017 at 9:19 PM, I PVP <ip...@hotmail.com> wrote:
>
>> Does ignitevisorcmd.sh starts the node or is it a management interface?
>>
>> Why ignitevisorcmd.sh behaves like if Ignite was not started and  does
>> not see the cache that was created?
>>
>> ignite.sh starts fine. But,  when I start ignitevisorcmd.sh and type the
>> open command  it asks me for the configuration file and  even informing the
>> same configuration file used to start ignite   ignitevisor  says:  "Ignite
>> node started OK”  ,  it shows 00:00:00 uptime and the cache command says
>> "(wrn) <visor>: No caches found."
>>
>> Ignite is being started with "ignite.sh config/ignite-config.xml”
>>
>> ignite-config.xml has the following content:
>>
>> -----
>> <?xml version="1.0" encoding="UTF-8”?>
>>
>> <beans xmlns="http://www.springframework.org/schema/beans"
>>        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>>        xsi:schemaLocation="
>>        http://www.springframework.org/schema/beans
>>        http://www.springframework.org/schema/beans/spring-beans.xsd”>
>>
>> <bean id="ignite.cfg" class="org.apache.ignite.confi
>> guration.IgniteConfiguration">
>>    <property name="cacheConfiguration">
>>       <list>
>>          <bean class="org.apache.ignite.confi
>> guration.CacheConfiguration">
>>             <!-- Cache name. -->
>>             <property name="name" value="websession" />
>>             <property name="cacheMode" value="PARTITIONED" />
>>             <property name="backups" value="1" />
>>  </bean>
>>       </list>
>>    </property>
>> </bean>
>>
>> </beans>
>> -----
>>
>> Thanks
>>  IPVP
>>
>>
>
>
> --
> Alexey Kuznetsov
>
>


-- 
Alexey Kuznetsov

Re: ignitevisor starting the node twice

Posted by I PVP <ip...@hotmail.com>.
Alexey,

Thanks for answering.

How do I make  ignitevisorcmd.sh  see my “real” node(s) ?

best,

IPVP

On May 29, 2017 at 10:39:41 PM, Alexey Kuznetsov (akuznetsov@apache.org<ma...@apache.org>) wrote:

Hi, IPVP.

Yes,  ignitevisorcmd.sh starts internal node in "daemon" mode.
This node is "invisible" for other nodes and doe not have caches data and does not participate in compute task executions.

See: IgniteConfiguration#setDaemon javadocs for more info.

On Sat, May 27, 2017 at 9:19 PM, I PVP <ip...@hotmail.com>> wrote:
Does ignitevisorcmd.sh starts the node or is it a management interface?

Why ignitevisorcmd.sh behaves like if Ignite was not started and  does not see the cache that was created?

ignite.sh starts fine. But,  when I start ignitevisorcmd.sh and type the open command  it asks me for the configuration file and  even informing the same configuration file used to start ignite   ignitevisor  says:  "Ignite node started OK”  ,  it shows 00:00:00 uptime and the cache command says "(wrn) <visor>: No caches found."

Ignite is being started with "ignite.sh config/ignite-config.xml”

ignite-config.xml has the following content:

-----
<?xml version="1.0" encoding="UTF-8”?>

<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="
       http://www.springframework.org/schema/beans
       http://www.springframework.org/schema/beans/spring-beans.xsd”>

<bean id="ignite.cfg" class="org.apache.ignite.configuration.IgniteConfiguration">
   <property name="cacheConfiguration">
      <list>
         <bean class="org.apache.ignite.configuration.CacheConfiguration">
            <!-- Cache name. -->
            <property name="name" value="websession" />
            <property name="cacheMode" value="PARTITIONED" />
            <property name="backups" value="1" />
 </bean>
      </list>
   </property>
</bean>

</beans>
-----

Thanks
 IPVP




--
Alexey Kuznetsov

Re: ignitevisor starting the node twice

Posted by Alexey Kuznetsov <ak...@apache.org>.
Hi, IPVP.

Yes,  ignitevisorcmd.sh starts internal node in "daemon" mode.
This node is "invisible" for other nodes and doe not have caches data and
does not participate in compute task executions.

See: IgniteConfiguration#setDaemon javadocs for more info.

On Sat, May 27, 2017 at 9:19 PM, I PVP <ip...@hotmail.com> wrote:

> Does ignitevisorcmd.sh starts the node or is it a management interface?
>
> Why ignitevisorcmd.sh behaves like if Ignite was not started and  does not
> see the cache that was created?
>
> ignite.sh starts fine. But,  when I start ignitevisorcmd.sh and type the
> open command  it asks me for the configuration file and  even informing the
> same configuration file used to start ignite   ignitevisor  says:  "Ignite
> node started OK”  ,  it shows 00:00:00 uptime and the cache command says
> "(wrn) <visor>: No caches found."
>
> Ignite is being started with "ignite.sh config/ignite-config.xml”
>
> ignite-config.xml has the following content:
>
> -----
> <?xml version="1.0" encoding="UTF-8”?>
>
> <beans xmlns="http://www.springframework.org/schema/beans"
>        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>        xsi:schemaLocation="
>        http://www.springframework.org/schema/beans
>        http://www.springframework.org/schema/beans/spring-beans.xsd”>
>
> <bean id="ignite.cfg" class="org.apache.ignite.configuration.
> IgniteConfiguration">
>    <property name="cacheConfiguration">
>       <list>
>          <bean class="org.apache.ignite.configuration.CacheConfiguration">
>             <!-- Cache name. -->
>             <property name="name" value="websession" />
>             <property name="cacheMode" value="PARTITIONED" />
>             <property name="backups" value="1" />
>  </bean>
>       </list>
>    </property>
> </bean>
>
> </beans>
> -----
>
> Thanks
>  IPVP
>
>


-- 
Alexey Kuznetsov