You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@continuum.apache.org by Anshula <an...@isobar.net> on 2007/09/05 16:24:31 UTC
Scheduled Builds Timing out
Hello all,
I am using Continuum 1.1-beta-2 with Perforce to integrate all my projects
in the build management system.
I have been using it over a month or so, and have around 15 project
groups/projects integrated into it. I have scheduled a build in the system
which runs at 7:30 pm everyday.
The build system has been running properly building when it detects changes
at the scheduled time
But since 2 days, everyday the builds are timing out. I have set a Maximum
job execution time of 3600 secs. Each of the projects does not take more
than 1 minute to build.
Continuum queues all the projects and prints a warning in the log file like
-
"Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a didn't
complete within time, cancelling it." And shows all the projects in queued
state only. I need to restart Continuum to build them again.
Thanks for your time. Any help will be appreciated.
Regards,
Anshula
--
View this message in context: http://www.nabble.com/Scheduled-Builds-Timing-out-tf4384387.html#a12499048
Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Scheduled Builds Timing out
Posted by Anshula <an...@isobar.net>.
No even that is not the case. I have only 1 build definition and that too at
the group level. I do not have any project level definitions.
Regards,
Anshula
Emmanuel Venisse wrote:
>
> if forced build works fine, scheduled build should work too because it's
> the same code that run both. The possible difference is if you have more
> than one build definition, the forced build use the
> default one.
>
> About logs, you must have the same log for scheduled and forced builds. I
> don't understand what's happen.
>
> Emmanuel
>
> Anshula a écrit :
>> I dont think so. When I installed Continuum, I followed the standard
>> installation instructions. I havent changed the logging configurations
>> anywhere.
>> These logs are for 1 day only. Continuum is running as a service and I
>> have
>> scheduled a build at 7:30 pm. Usually what I observe is that the logs get
>> written at 7:30 pm when Continuum starts to checkout source and build the
>> files.
>> I am attaching one more file from a previo
>> http://www.nabble.com/file/p12522974/wrapper.20070829.log
>> wrapper.20070829.log us day as well, which has logs of some forced builds
>> as
>> well.
>>
>> Thanks
>> Anshula
>>
>>
>>
>> Emmanuel Venisse wrote:
>>> Do you have redefined log levels? I don't see lot of logs in the file
>>> you
>>> sent.
>>>
>>> Anshula a écrit :
>>>> Emmanuel,
>>>>
>>>> In the build-output-directory of each project as well as on the build
>>>> result
>>>> page, the last build that I can find is the last successful build.
>>>> The Builds that have a timeout, did not generate a build result.
>>>> The only place that it logged about the timeout was the Continuum log
>>>> file/Wrapper.log.
>>>> Should it have generated a build result ? Coz it did not get built at
>>>> all...
>>>>
>>>> Thanks,
>>>> Anshula
>>>>
>>>>
>>>> Emmanuel Venisse wrote:
>>>>> In build result page, choose a build result with timeout ant take the
>>>>> build id, then go to the build-output-directory and send us the
>>>>> content
>>>>> of
>>>>> the build output you'll find in this directory.
>>>>>
>>>>> Emmanuel
>>>>>
>>>>> Anshula a écrit :
>>>>>> Hi Emmanuel,
>>>>>>
>>>>>> The File is as attached. Thanks for the help.
>>>>>>
>>>>>> Anshula
>>>>>>
>>>>>>
>>>>>> Emmanuel Venisse wrote:
>>>>>>> Can you send your logs?
>>>>>>>
>>>>>>> Anshula a écrit :
>>>>>>>> Hi Emmanuel,
>>>>>>>>
>>>>>>>> Acutally right now I am just building, there are no unit tests
>>>>>>>> added
>>>>>>>> as
>>>>>>>> of
>>>>>>>> now. The build does not take more than 1-2 minutes, I tried
>>>>>>>> building
>>>>>>>> all
>>>>>>>> projects locally and verified this.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Anshula
>>>>>>>>
>>>>>>>>
>>>>>>>> Emmanuel Venisse wrote:
>>>>>>>>> Maybe you have a test that hang out?
>>>>>>>>>
>>>>>>>>> Emmanuel
>>>>>>>>>
>>>>>>>>> Anshula a écrit :
>>>>>>>>>> Hello all,
>>>>>>>>>>
>>>>>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>>>>>> projects
>>>>>>>>>> in the build management system.
>>>>>>>>>> I have been using it over a month or so, and have around 15
>>>>>>>>>> project
>>>>>>>>>> groups/projects integrated into it. I have scheduled a build in
>>>>>>>>>> the
>>>>>>>>>> system
>>>>>>>>>> which runs at 7:30 pm everyday.
>>>>>>>>>> The build system has been running properly building when it
>>>>>>>>>> detects
>>>>>>>>>> changes
>>>>>>>>>> at the scheduled time
>>>>>>>>>>
>>>>>>>>>> But since 2 days, everyday the builds are timing out. I have set
>>>>>>>>>> a
>>>>>>>>>> Maximum
>>>>>>>>>> job execution time of 3600 secs. Each of the projects does not
>>>>>>>>>> take
>>>>>>>>>> more
>>>>>>>>>> than 1 minute to build.
>>>>>>>>>>
>>>>>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>>>>>> file
>>>>>>>>>> like
>>>>>>>>>> -
>>>>>>>>>> "Task
>>>>>>>>>> org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>>>>>> didn't
>>>>>>>>>> complete within time, cancelling it." And shows all the projects
>>>>>>>>>> in
>>>>>>>>>> queued
>>>>>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>>>>>
>>>>>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>>>>>> Regards,
>>>>>>>>>> Anshula
>>>>>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>>>>>> wrapper.20070901.log
>>>>>
>>>
>>>
>>
>
>
>
--
View this message in context: http://www.nabble.com/Scheduled-Builds-Timing-out-tf4384387.html#a12530927
Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Scheduled Builds Timing out
Posted by Emmanuel Venisse <em...@venisse.net>.
if forced build works fine, scheduled build should work too because it's the same code that run both. The possible difference is if you have more than one build definition, the forced build use the
default one.
About logs, you must have the same log for scheduled and forced builds. I don't understand what's happen.
Emmanuel
Anshula a écrit :
> I dont think so. When I installed Continuum, I followed the standard
> installation instructions. I havent changed the logging configurations
> anywhere.
> These logs are for 1 day only. Continuum is running as a service and I have
> scheduled a build at 7:30 pm. Usually what I observe is that the logs get
> written at 7:30 pm when Continuum starts to checkout source and build the
> files.
> I am attaching one more file from a previo
> http://www.nabble.com/file/p12522974/wrapper.20070829.log
> wrapper.20070829.log us day as well, which has logs of some forced builds as
> well.
>
> Thanks
> Anshula
>
>
>
> Emmanuel Venisse wrote:
>> Do you have redefined log levels? I don't see lot of logs in the file you
>> sent.
>>
>> Anshula a écrit :
>>> Emmanuel,
>>>
>>> In the build-output-directory of each project as well as on the build
>>> result
>>> page, the last build that I can find is the last successful build.
>>> The Builds that have a timeout, did not generate a build result.
>>> The only place that it logged about the timeout was the Continuum log
>>> file/Wrapper.log.
>>> Should it have generated a build result ? Coz it did not get built at
>>> all...
>>>
>>> Thanks,
>>> Anshula
>>>
>>>
>>> Emmanuel Venisse wrote:
>>>> In build result page, choose a build result with timeout ant take the
>>>> build id, then go to the build-output-directory and send us the content
>>>> of
>>>> the build output you'll find in this directory.
>>>>
>>>> Emmanuel
>>>>
>>>> Anshula a écrit :
>>>>> Hi Emmanuel,
>>>>>
>>>>> The File is as attached. Thanks for the help.
>>>>>
>>>>> Anshula
>>>>>
>>>>>
>>>>> Emmanuel Venisse wrote:
>>>>>> Can you send your logs?
>>>>>>
>>>>>> Anshula a écrit :
>>>>>>> Hi Emmanuel,
>>>>>>>
>>>>>>> Acutally right now I am just building, there are no unit tests added
>>>>>>> as
>>>>>>> of
>>>>>>> now. The build does not take more than 1-2 minutes, I tried building
>>>>>>> all
>>>>>>> projects locally and verified this.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Anshula
>>>>>>>
>>>>>>>
>>>>>>> Emmanuel Venisse wrote:
>>>>>>>> Maybe you have a test that hang out?
>>>>>>>>
>>>>>>>> Emmanuel
>>>>>>>>
>>>>>>>> Anshula a écrit :
>>>>>>>>> Hello all,
>>>>>>>>>
>>>>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>>>>> projects
>>>>>>>>> in the build management system.
>>>>>>>>> I have been using it over a month or so, and have around 15 project
>>>>>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>>>>>> system
>>>>>>>>> which runs at 7:30 pm everyday.
>>>>>>>>> The build system has been running properly building when it detects
>>>>>>>>> changes
>>>>>>>>> at the scheduled time
>>>>>>>>>
>>>>>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>>>>>> Maximum
>>>>>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>>>>>> more
>>>>>>>>> than 1 minute to build.
>>>>>>>>>
>>>>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>>>>> file
>>>>>>>>> like
>>>>>>>>> -
>>>>>>>>> "Task
>>>>>>>>> org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>>>>> didn't
>>>>>>>>> complete within time, cancelling it." And shows all the projects in
>>>>>>>>> queued
>>>>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>>>>
>>>>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>>>>> Regards,
>>>>>>>>> Anshula
>>>>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>>>>> wrapper.20070901.log
>>>>
>>
>>
>
Re: Scheduled Builds Timing out
Posted by Anshula <an...@isobar.net>.
I dont think so. When I installed Continuum, I followed the standard
installation instructions. I havent changed the logging configurations
anywhere.
These logs are for 1 day only. Continuum is running as a service and I have
scheduled a build at 7:30 pm. Usually what I observe is that the logs get
written at 7:30 pm when Continuum starts to checkout source and build the
files.
I am attaching one more file from a previo
http://www.nabble.com/file/p12522974/wrapper.20070829.log
wrapper.20070829.log us day as well, which has logs of some forced builds as
well.
Thanks
Anshula
Emmanuel Venisse wrote:
>
> Do you have redefined log levels? I don't see lot of logs in the file you
> sent.
>
> Anshula a écrit :
>> Emmanuel,
>>
>> In the build-output-directory of each project as well as on the build
>> result
>> page, the last build that I can find is the last successful build.
>> The Builds that have a timeout, did not generate a build result.
>> The only place that it logged about the timeout was the Continuum log
>> file/Wrapper.log.
>> Should it have generated a build result ? Coz it did not get built at
>> all...
>>
>> Thanks,
>> Anshula
>>
>>
>> Emmanuel Venisse wrote:
>>> In build result page, choose a build result with timeout ant take the
>>> build id, then go to the build-output-directory and send us the content
>>> of
>>> the build output you'll find in this directory.
>>>
>>> Emmanuel
>>>
>>> Anshula a écrit :
>>>> Hi Emmanuel,
>>>>
>>>> The File is as attached. Thanks for the help.
>>>>
>>>> Anshula
>>>>
>>>>
>>>> Emmanuel Venisse wrote:
>>>>> Can you send your logs?
>>>>>
>>>>> Anshula a écrit :
>>>>>> Hi Emmanuel,
>>>>>>
>>>>>> Acutally right now I am just building, there are no unit tests added
>>>>>> as
>>>>>> of
>>>>>> now. The build does not take more than 1-2 minutes, I tried building
>>>>>> all
>>>>>> projects locally and verified this.
>>>>>>
>>>>>> Regards,
>>>>>> Anshula
>>>>>>
>>>>>>
>>>>>> Emmanuel Venisse wrote:
>>>>>>> Maybe you have a test that hang out?
>>>>>>>
>>>>>>> Emmanuel
>>>>>>>
>>>>>>> Anshula a écrit :
>>>>>>>> Hello all,
>>>>>>>>
>>>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>>>> projects
>>>>>>>> in the build management system.
>>>>>>>> I have been using it over a month or so, and have around 15 project
>>>>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>>>>> system
>>>>>>>> which runs at 7:30 pm everyday.
>>>>>>>> The build system has been running properly building when it detects
>>>>>>>> changes
>>>>>>>> at the scheduled time
>>>>>>>>
>>>>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>>>>> Maximum
>>>>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>>>>> more
>>>>>>>> than 1 minute to build.
>>>>>>>>
>>>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>>>> file
>>>>>>>> like
>>>>>>>> -
>>>>>>>> "Task
>>>>>>>> org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>>>> didn't
>>>>>>>> complete within time, cancelling it." And shows all the projects in
>>>>>>>> queued
>>>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>>>
>>>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>>>> Regards,
>>>>>>>> Anshula
>>>>>
>>>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>>>> wrapper.20070901.log
>>>
>>>
>>
>
>
>
--
View this message in context: http://www.nabble.com/Scheduled-Builds-Timing-out-tf4384387.html#a12522974
Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Scheduled Builds Timing out
Posted by Emmanuel Venisse <em...@venisse.net>.
Do you have redefined log levels? I don't see lot of logs in the file you sent.
Anshula a écrit :
> Emmanuel,
>
> In the build-output-directory of each project as well as on the build result
> page, the last build that I can find is the last successful build.
> The Builds that have a timeout, did not generate a build result.
> The only place that it logged about the timeout was the Continuum log
> file/Wrapper.log.
> Should it have generated a build result ? Coz it did not get built at all...
>
> Thanks,
> Anshula
>
>
> Emmanuel Venisse wrote:
>> In build result page, choose a build result with timeout ant take the
>> build id, then go to the build-output-directory and send us the content of
>> the build output you'll find in this directory.
>>
>> Emmanuel
>>
>> Anshula a écrit :
>>> Hi Emmanuel,
>>>
>>> The File is as attached. Thanks for the help.
>>>
>>> Anshula
>>>
>>>
>>> Emmanuel Venisse wrote:
>>>> Can you send your logs?
>>>>
>>>> Anshula a écrit :
>>>>> Hi Emmanuel,
>>>>>
>>>>> Acutally right now I am just building, there are no unit tests added as
>>>>> of
>>>>> now. The build does not take more than 1-2 minutes, I tried building
>>>>> all
>>>>> projects locally and verified this.
>>>>>
>>>>> Regards,
>>>>> Anshula
>>>>>
>>>>>
>>>>> Emmanuel Venisse wrote:
>>>>>> Maybe you have a test that hang out?
>>>>>>
>>>>>> Emmanuel
>>>>>>
>>>>>> Anshula a écrit :
>>>>>>> Hello all,
>>>>>>>
>>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>>> projects
>>>>>>> in the build management system.
>>>>>>> I have been using it over a month or so, and have around 15 project
>>>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>>>> system
>>>>>>> which runs at 7:30 pm everyday.
>>>>>>> The build system has been running properly building when it detects
>>>>>>> changes
>>>>>>> at the scheduled time
>>>>>>>
>>>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>>>> Maximum
>>>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>>>> more
>>>>>>> than 1 minute to build.
>>>>>>>
>>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>>> file
>>>>>>> like
>>>>>>> -
>>>>>>> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>>> didn't
>>>>>>> complete within time, cancelling it." And shows all the projects in
>>>>>>> queued
>>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>>
>>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>>> Regards,
>>>>>>> Anshula
>>>>
>>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>>> wrapper.20070901.log
>>
>>
>
Re: Scheduled Builds Timing out
Posted by Emmanuel Venisse <em...@venisse.net>.
I don't know, but I don't think.
imossible to analyse with messages in logs and seems to works fine with forced build
Emmanuel
Anshula a écrit :
> Emmanuel,
>
> Could it be an issue of Continuum and Perforce? I can see that there are
> many open bugs regarding using Perforce as an SCM in Continuum. I still
> have't been able to get it working..!
>
> Thanks,
> Anshula
>
>
> Emmanuel Venisse wrote:
>> ok, I'll try to add the build output even if the timeout appears
>>
>> Emmanuel
>>
>> Anshula a écrit :
>>> Emmanuel,
>>>
>>> In the build-output-directory of each project as well as on the build
>>> result
>>> page, the last build that I can find is the last successful build.
>>> The Builds that have a timeout, did not generate a build result.
>>> The only place that it logged about the timeout was the Continuum log
>>> file/Wrapper.log.
>>> Should it have generated a build result ? Coz it did not get built at
>>> all...
>>>
>>> Thanks,
>>> Anshula
>>>
>>>
>>> Emmanuel Venisse wrote:
>>>> In build result page, choose a build result with timeout ant take the
>>>> build id, then go to the build-output-directory and send us the content
>>>> of
>>>> the build output you'll find in this directory.
>>>>
>>>> Emmanuel
>>>>
>>>> Anshula a écrit :
>>>>> Hi Emmanuel,
>>>>>
>>>>> The File is as attached. Thanks for the help.
>>>>>
>>>>> Anshula
>>>>>
>>>>>
>>>>> Emmanuel Venisse wrote:
>>>>>> Can you send your logs?
>>>>>>
>>>>>> Anshula a écrit :
>>>>>>> Hi Emmanuel,
>>>>>>>
>>>>>>> Acutally right now I am just building, there are no unit tests added
>>>>>>> as
>>>>>>> of
>>>>>>> now. The build does not take more than 1-2 minutes, I tried building
>>>>>>> all
>>>>>>> projects locally and verified this.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Anshula
>>>>>>>
>>>>>>>
>>>>>>> Emmanuel Venisse wrote:
>>>>>>>> Maybe you have a test that hang out?
>>>>>>>>
>>>>>>>> Emmanuel
>>>>>>>>
>>>>>>>> Anshula a écrit :
>>>>>>>>> Hello all,
>>>>>>>>>
>>>>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>>>>> projects
>>>>>>>>> in the build management system.
>>>>>>>>> I have been using it over a month or so, and have around 15 project
>>>>>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>>>>>> system
>>>>>>>>> which runs at 7:30 pm everyday.
>>>>>>>>> The build system has been running properly building when it detects
>>>>>>>>> changes
>>>>>>>>> at the scheduled time
>>>>>>>>>
>>>>>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>>>>>> Maximum
>>>>>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>>>>>> more
>>>>>>>>> than 1 minute to build.
>>>>>>>>>
>>>>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>>>>> file
>>>>>>>>> like
>>>>>>>>> -
>>>>>>>>> "Task
>>>>>>>>> org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>>>>> didn't
>>>>>>>>> complete within time, cancelling it." And shows all the projects in
>>>>>>>>> queued
>>>>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>>>>
>>>>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>>>>> Regards,
>>>>>>>>> Anshula
>>>>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>>>>> wrapper.20070901.log
>>>>
>>
>>
>
Re: Scheduled Builds Timing out
Posted by Anshula <an...@isobar.net>.
Emmanuel,
Could it be an issue of Continuum and Perforce? I can see that there are
many open bugs regarding using Perforce as an SCM in Continuum. I still
have't been able to get it working..!
Thanks,
Anshula
Emmanuel Venisse wrote:
>
> ok, I'll try to add the build output even if the timeout appears
>
> Emmanuel
>
> Anshula a écrit :
>> Emmanuel,
>>
>> In the build-output-directory of each project as well as on the build
>> result
>> page, the last build that I can find is the last successful build.
>> The Builds that have a timeout, did not generate a build result.
>> The only place that it logged about the timeout was the Continuum log
>> file/Wrapper.log.
>> Should it have generated a build result ? Coz it did not get built at
>> all...
>>
>> Thanks,
>> Anshula
>>
>>
>> Emmanuel Venisse wrote:
>>> In build result page, choose a build result with timeout ant take the
>>> build id, then go to the build-output-directory and send us the content
>>> of
>>> the build output you'll find in this directory.
>>>
>>> Emmanuel
>>>
>>> Anshula a écrit :
>>>> Hi Emmanuel,
>>>>
>>>> The File is as attached. Thanks for the help.
>>>>
>>>> Anshula
>>>>
>>>>
>>>> Emmanuel Venisse wrote:
>>>>> Can you send your logs?
>>>>>
>>>>> Anshula a écrit :
>>>>>> Hi Emmanuel,
>>>>>>
>>>>>> Acutally right now I am just building, there are no unit tests added
>>>>>> as
>>>>>> of
>>>>>> now. The build does not take more than 1-2 minutes, I tried building
>>>>>> all
>>>>>> projects locally and verified this.
>>>>>>
>>>>>> Regards,
>>>>>> Anshula
>>>>>>
>>>>>>
>>>>>> Emmanuel Venisse wrote:
>>>>>>> Maybe you have a test that hang out?
>>>>>>>
>>>>>>> Emmanuel
>>>>>>>
>>>>>>> Anshula a écrit :
>>>>>>>> Hello all,
>>>>>>>>
>>>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>>>> projects
>>>>>>>> in the build management system.
>>>>>>>> I have been using it over a month or so, and have around 15 project
>>>>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>>>>> system
>>>>>>>> which runs at 7:30 pm everyday.
>>>>>>>> The build system has been running properly building when it detects
>>>>>>>> changes
>>>>>>>> at the scheduled time
>>>>>>>>
>>>>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>>>>> Maximum
>>>>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>>>>> more
>>>>>>>> than 1 minute to build.
>>>>>>>>
>>>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>>>> file
>>>>>>>> like
>>>>>>>> -
>>>>>>>> "Task
>>>>>>>> org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>>>> didn't
>>>>>>>> complete within time, cancelling it." And shows all the projects in
>>>>>>>> queued
>>>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>>>
>>>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>>>> Regards,
>>>>>>>> Anshula
>>>>>
>>>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>>>> wrapper.20070901.log
>>>
>>>
>>
>
>
>
--
View this message in context: http://www.nabble.com/Scheduled-Builds-Timing-out-tf4384387.html#a12525374
Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Scheduled Builds Timing out
Posted by Emmanuel Venisse <em...@venisse.net>.
ok, I'll try to add the build output even if the timeout appears
Emmanuel
Anshula a écrit :
> Emmanuel,
>
> In the build-output-directory of each project as well as on the build result
> page, the last build that I can find is the last successful build.
> The Builds that have a timeout, did not generate a build result.
> The only place that it logged about the timeout was the Continuum log
> file/Wrapper.log.
> Should it have generated a build result ? Coz it did not get built at all...
>
> Thanks,
> Anshula
>
>
> Emmanuel Venisse wrote:
>> In build result page, choose a build result with timeout ant take the
>> build id, then go to the build-output-directory and send us the content of
>> the build output you'll find in this directory.
>>
>> Emmanuel
>>
>> Anshula a écrit :
>>> Hi Emmanuel,
>>>
>>> The File is as attached. Thanks for the help.
>>>
>>> Anshula
>>>
>>>
>>> Emmanuel Venisse wrote:
>>>> Can you send your logs?
>>>>
>>>> Anshula a écrit :
>>>>> Hi Emmanuel,
>>>>>
>>>>> Acutally right now I am just building, there are no unit tests added as
>>>>> of
>>>>> now. The build does not take more than 1-2 minutes, I tried building
>>>>> all
>>>>> projects locally and verified this.
>>>>>
>>>>> Regards,
>>>>> Anshula
>>>>>
>>>>>
>>>>> Emmanuel Venisse wrote:
>>>>>> Maybe you have a test that hang out?
>>>>>>
>>>>>> Emmanuel
>>>>>>
>>>>>> Anshula a écrit :
>>>>>>> Hello all,
>>>>>>>
>>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>>> projects
>>>>>>> in the build management system.
>>>>>>> I have been using it over a month or so, and have around 15 project
>>>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>>>> system
>>>>>>> which runs at 7:30 pm everyday.
>>>>>>> The build system has been running properly building when it detects
>>>>>>> changes
>>>>>>> at the scheduled time
>>>>>>>
>>>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>>>> Maximum
>>>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>>>> more
>>>>>>> than 1 minute to build.
>>>>>>>
>>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>>> file
>>>>>>> like
>>>>>>> -
>>>>>>> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>>> didn't
>>>>>>> complete within time, cancelling it." And shows all the projects in
>>>>>>> queued
>>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>>
>>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>>> Regards,
>>>>>>> Anshula
>>>>
>>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>>> wrapper.20070901.log
>>
>>
>
Re: Scheduled Builds Timing out
Posted by Anshula <an...@isobar.net>.
Emmanuel,
In the build-output-directory of each project as well as on the build result
page, the last build that I can find is the last successful build.
The Builds that have a timeout, did not generate a build result.
The only place that it logged about the timeout was the Continuum log
file/Wrapper.log.
Should it have generated a build result ? Coz it did not get built at all...
Thanks,
Anshula
Emmanuel Venisse wrote:
>
> In build result page, choose a build result with timeout ant take the
> build id, then go to the build-output-directory and send us the content of
> the build output you'll find in this directory.
>
> Emmanuel
>
> Anshula a écrit :
>> Hi Emmanuel,
>>
>> The File is as attached. Thanks for the help.
>>
>> Anshula
>>
>>
>> Emmanuel Venisse wrote:
>>> Can you send your logs?
>>>
>>> Anshula a écrit :
>>>> Hi Emmanuel,
>>>>
>>>> Acutally right now I am just building, there are no unit tests added as
>>>> of
>>>> now. The build does not take more than 1-2 minutes, I tried building
>>>> all
>>>> projects locally and verified this.
>>>>
>>>> Regards,
>>>> Anshula
>>>>
>>>>
>>>> Emmanuel Venisse wrote:
>>>>> Maybe you have a test that hang out?
>>>>>
>>>>> Emmanuel
>>>>>
>>>>> Anshula a écrit :
>>>>>> Hello all,
>>>>>>
>>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>>> projects
>>>>>> in the build management system.
>>>>>> I have been using it over a month or so, and have around 15 project
>>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>>> system
>>>>>> which runs at 7:30 pm everyday.
>>>>>> The build system has been running properly building when it detects
>>>>>> changes
>>>>>> at the scheduled time
>>>>>>
>>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>>> Maximum
>>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>>> more
>>>>>> than 1 minute to build.
>>>>>>
>>>>>> Continuum queues all the projects and prints a warning in the log
>>>>>> file
>>>>>> like
>>>>>> -
>>>>>> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>>> didn't
>>>>>> complete within time, cancelling it." And shows all the projects in
>>>>>> queued
>>>>>> state only. I need to restart Continuum to build them again.
>>>>>>
>>>>>> Thanks for your time. Any help will be appreciated.
>>>>>> Regards,
>>>>>> Anshula
>>>>>
>>>
>>>
>> http://www.nabble.com/file/p12500482/wrapper.20070901.log
>> wrapper.20070901.log
>
>
>
--
View this message in context: http://www.nabble.com/Scheduled-Builds-Timing-out-tf4384387.html#a12509142
Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Scheduled Builds Timing out
Posted by Emmanuel Venisse <em...@venisse.net>.
In build result page, choose a build result with timeout ant take the build id, then go to the build-output-directory and send us the content of the build output you'll find in this directory.
Emmanuel
Anshula a écrit :
> Hi Emmanuel,
>
> The File is as attached. Thanks for the help.
>
> Anshula
>
>
> Emmanuel Venisse wrote:
>> Can you send your logs?
>>
>> Anshula a écrit :
>>> Hi Emmanuel,
>>>
>>> Acutally right now I am just building, there are no unit tests added as
>>> of
>>> now. The build does not take more than 1-2 minutes, I tried building all
>>> projects locally and verified this.
>>>
>>> Regards,
>>> Anshula
>>>
>>>
>>> Emmanuel Venisse wrote:
>>>> Maybe you have a test that hang out?
>>>>
>>>> Emmanuel
>>>>
>>>> Anshula a écrit :
>>>>> Hello all,
>>>>>
>>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>>> projects
>>>>> in the build management system.
>>>>> I have been using it over a month or so, and have around 15 project
>>>>> groups/projects integrated into it. I have scheduled a build in the
>>>>> system
>>>>> which runs at 7:30 pm everyday.
>>>>> The build system has been running properly building when it detects
>>>>> changes
>>>>> at the scheduled time
>>>>>
>>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>>> Maximum
>>>>> job execution time of 3600 secs. Each of the projects does not take
>>>>> more
>>>>> than 1 minute to build.
>>>>>
>>>>> Continuum queues all the projects and prints a warning in the log file
>>>>> like
>>>>> -
>>>>> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>>> didn't
>>>>> complete within time, cancelling it." And shows all the projects in
>>>>> queued
>>>>> state only. I need to restart Continuum to build them again.
>>>>>
>>>>> Thanks for your time. Any help will be appreciated.
>>>>> Regards,
>>>>> Anshula
>>>>
>>
>>
> http://www.nabble.com/file/p12500482/wrapper.20070901.log
> wrapper.20070901.log
Re: Scheduled Builds Timing out
Posted by Anshula <an...@isobar.net>.
Hi Emmanuel,
The File is as attached. Thanks for the help.
Anshula
Emmanuel Venisse wrote:
>
> Can you send your logs?
>
> Anshula a écrit :
>> Hi Emmanuel,
>>
>> Acutally right now I am just building, there are no unit tests added as
>> of
>> now. The build does not take more than 1-2 minutes, I tried building all
>> projects locally and verified this.
>>
>> Regards,
>> Anshula
>>
>>
>> Emmanuel Venisse wrote:
>>> Maybe you have a test that hang out?
>>>
>>> Emmanuel
>>>
>>> Anshula a écrit :
>>>> Hello all,
>>>>
>>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>>> projects
>>>> in the build management system.
>>>> I have been using it over a month or so, and have around 15 project
>>>> groups/projects integrated into it. I have scheduled a build in the
>>>> system
>>>> which runs at 7:30 pm everyday.
>>>> The build system has been running properly building when it detects
>>>> changes
>>>> at the scheduled time
>>>>
>>>> But since 2 days, everyday the builds are timing out. I have set a
>>>> Maximum
>>>> job execution time of 3600 secs. Each of the projects does not take
>>>> more
>>>> than 1 minute to build.
>>>>
>>>> Continuum queues all the projects and prints a warning in the log file
>>>> like
>>>> -
>>>> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>>> didn't
>>>> complete within time, cancelling it." And shows all the projects in
>>>> queued
>>>> state only. I need to restart Continuum to build them again.
>>>>
>>>> Thanks for your time. Any help will be appreciated.
>>>> Regards,
>>>> Anshula
>>>
>>>
>>
>
>
>
http://www.nabble.com/file/p12500482/wrapper.20070901.log
wrapper.20070901.log
--
View this message in context: http://www.nabble.com/Scheduled-Builds-Timing-out-tf4384387.html#a12500482
Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Scheduled Builds Timing out
Posted by Emmanuel Venisse <em...@venisse.net>.
Can you send your logs?
Anshula a écrit :
> Hi Emmanuel,
>
> Acutally right now I am just building, there are no unit tests added as of
> now. The build does not take more than 1-2 minutes, I tried building all
> projects locally and verified this.
>
> Regards,
> Anshula
>
>
> Emmanuel Venisse wrote:
>> Maybe you have a test that hang out?
>>
>> Emmanuel
>>
>> Anshula a écrit :
>>> Hello all,
>>>
>>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>>> projects
>>> in the build management system.
>>> I have been using it over a month or so, and have around 15 project
>>> groups/projects integrated into it. I have scheduled a build in the
>>> system
>>> which runs at 7:30 pm everyday.
>>> The build system has been running properly building when it detects
>>> changes
>>> at the scheduled time
>>>
>>> But since 2 days, everyday the builds are timing out. I have set a
>>> Maximum
>>> job execution time of 3600 secs. Each of the projects does not take more
>>> than 1 minute to build.
>>>
>>> Continuum queues all the projects and prints a warning in the log file
>>> like
>>> -
>>> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>>> didn't
>>> complete within time, cancelling it." And shows all the projects in
>>> queued
>>> state only. I need to restart Continuum to build them again.
>>>
>>> Thanks for your time. Any help will be appreciated.
>>> Regards,
>>> Anshula
>>
>>
>
Re: Scheduled Builds Timing out
Posted by Anshula <an...@isobar.net>.
Hi Emmanuel,
Acutally right now I am just building, there are no unit tests added as of
now. The build does not take more than 1-2 minutes, I tried building all
projects locally and verified this.
Regards,
Anshula
Emmanuel Venisse wrote:
>
> Maybe you have a test that hang out?
>
> Emmanuel
>
> Anshula a écrit :
>> Hello all,
>>
>> I am using Continuum 1.1-beta-2 with Perforce to integrate all my
>> projects
>> in the build management system.
>> I have been using it over a month or so, and have around 15 project
>> groups/projects integrated into it. I have scheduled a build in the
>> system
>> which runs at 7:30 pm everyday.
>> The build system has been running properly building when it detects
>> changes
>> at the scheduled time
>>
>> But since 2 days, everyday the builds are timing out. I have set a
>> Maximum
>> job execution time of 3600 secs. Each of the projects does not take more
>> than 1 minute to build.
>>
>> Continuum queues all the projects and prints a warning in the log file
>> like
>> -
>> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a
>> didn't
>> complete within time, cancelling it." And shows all the projects in
>> queued
>> state only. I need to restart Continuum to build them again.
>>
>> Thanks for your time. Any help will be appreciated.
>> Regards,
>> Anshula
>
>
>
--
View this message in context: http://www.nabble.com/Scheduled-Builds-Timing-out-tf4384387.html#a12499984
Sent from the Continuum - Users mailing list archive at Nabble.com.
Re: Scheduled Builds Timing out
Posted by Emmanuel Venisse <em...@venisse.net>.
Maybe you have a test that hang out?
Emmanuel
Anshula a écrit :
> Hello all,
>
> I am using Continuum 1.1-beta-2 with Perforce to integrate all my projects
> in the build management system.
> I have been using it over a month or so, and have around 15 project
> groups/projects integrated into it. I have scheduled a build in the system
> which runs at 7:30 pm everyday.
> The build system has been running properly building when it detects changes
> at the scheduled time
>
> But since 2 days, everyday the builds are timing out. I have set a Maximum
> job execution time of 3600 secs. Each of the projects does not take more
> than 1 minute to build.
>
> Continuum queues all the projects and prints a warning in the log file like
> -
> "Task org.apache.maven.continuum.buildqueue.BuildProjectTask@151179a didn't
> complete within time, cancelling it." And shows all the projects in queued
> state only. I need to restart Continuum to build them again.
>
> Thanks for your time. Any help will be appreciated.
> Regards,
> Anshula