You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Pranav Saxena <pr...@citrix.com> on 2013/02/19 12:25:46 UTC
RE: [ACS4.2] LDAP UI branch Merged
Abhi ,
I just completed the UI integration for this feature on my feature branch asf/LDAP-UI and have merged it with asf/master . You can go ahead and test the functionality .
Thanks,
Pranav
-----Original Message-----
From: Abhinandan Prateek
Sent: Saturday, February 16, 2013 8:59 AM
To: Pranav Saxena; cloudstack-dev@incubator.apache.org
Subject: Re: [ACS4.2] LDAP UI
Pranav,
I was wondering we have API to get configuration, can't we reuse the same to get ldap config ?
-abhi
On 15/02/13 7:36 PM, "Pranav Saxena" <pr...@citrix.com> wrote:
>Abhi ,
>
>Just wanted to check with you if we have a list LDAP configuration API
>call in CS ? Because I would need this to list the current LDAP
>configuration on the UI , if it exists .
>
>Regards,
>Pranav
>
>-----Original Message-----
>From: Abhinandan Prateek [mailto:Abhinandan.Prateek@citrix.com]
>Sent: Thursday, February 14, 2013 12:27 PM
>To: cloudstack-dev@incubator.apache.org
>Subject: Re: [ACS4.2] LDAP UI
>
>
>On 14/02/13 11:30 AM, "David Nalley" <da...@gnsa.us> wrote:
>
>>On Thu, Feb 14, 2013 at 12:51 AM, Pranav Saxena
>><pr...@citrix.com> wrote:
>>> To configure LDAP , we need to pass in few multiple mandatory
>>>parameters -
>>>
>>> hostname Hostname or ip address of the ldap server eg:
>>>my.ldap.com
>>> queryfilter You specify a query filter here, which narrows down the
>>>users, who can be part of this domain.
>>> searchbase The search base defines the starting point for the
>>>search in the directory tree
>>>
>>> If you are referring to Global settings , that can be done but then
>>>we'll have to have three Ldap config parameters there . if that is a
>>>good design to handle this , then yes we can do that. Perhaps , the
>>>idea is to have a single dialog box where a user could supply three
>>>values and configure and debug them if something goes wrong.
>>
>>
>>Those are the mandatory API inputs for CloudStack.
>>But almost all environments will require username/password for binding
>>at a minimum, and you should probably, and prolly offer the SSL option
>>as well. Port should probably be an option too.
>>
>>Without at least bind creds, the API configuration is practically
>>useless on any modern LDAP server.
>>
>>--David
>
>The admin guide documents the LDAP API. SSL is supported.
>http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0
>.0-
>i
>ncubating/pdf/Admin_Guide/Apache_CloudStack-4.0.0-incubating-Admin_Guid
>e-e
>n
>-US.pdf
>
>Look for LDAP configuration. In short you have following config params:
>
>hostname
>searchbase
>queryfilter
>binddn
>bindpass
>port
>ssl
>truststore
>truststorepass
>response
>
>
>
>-abhi
>
>
>
>>
>
RE: [ACS4.2] LDAP UI branch Merged
Posted by Pranav Saxena <pr...@citrix.com>.
It's for 4.2 . That's why I committed them only to master .
@Abhi - Can you please confirm ?
-----Original Message-----
From: Suresh Sadhu
Sent: Thursday, February 21, 2013 4:06 PM
To: Pranav Saxena; cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Cc: Sudha Ponnaganti
Subject: RE: [ACS4.2] LDAP UI branch Merged
Thanks for your review comments ..I didn't see your UI changes in 4.1. branch .is it expected to be in 4.1 or 4.2?can you please confirm?
Regards
Sadhu
-----Original Message-----
From: Pranav Saxena
Sent: 20 February 2013 00:45
To: cloudstack-dev@incubator.apache.org; Suresh Sadhu; Abhinandan Prateek
Subject: RE: [ACS4.2] LDAP UI branch Merged
Btw,
For the last test case you mentioned -
1.Open the LDAP configuration Wizard(Navigate Global Setting-LdapConfiguration) 2. .Without providing any values,Click on "Ok" button
You won't be allowed to do this , since to configure LDAP , you need to provide some set of mandatory parameters and hence your expected result i.e (dialogue window should prompt with proper error message) is not valid .
Regards,
Pranav
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: Wednesday, February 20, 2013 12:32 AM
To: Suresh Sadhu; cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Subject: RE: [ACS4.2] LDAP UI branch Merged
Hi Sadhu ,
The LDAP test plan looks good to me from the LDAP-UI integration point of view . In case of any issues , please feel free to create a JIRA ticket and assign it to me .
Thanks,
Pranav
-----Original Message-----
From: Suresh Sadhu
Sent: Tuesday, February 19, 2013 11:32 PM
To: cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Cc: Pranav Saxena
Subject: RE: [ACS4.2] LDAP UI branch Merged
Hi,
Please review the following test plan for the feature "LDAP" and let me know the review comments.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/LDAP
Regards
Sadhu
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: 19 February 2013 16:56
To: Abhinandan Prateek; cloudstack-dev@incubator.apache.org
Subject: RE: [ACS4.2] LDAP UI branch Merged
Abhi ,
I just completed the UI integration for this feature on my feature branch asf/LDAP-UI and have merged it with asf/master . You can go ahead and test the functionality .
Thanks,
Pranav
-----Original Message-----
From: Abhinandan Prateek
Sent: Saturday, February 16, 2013 8:59 AM
To: Pranav Saxena; cloudstack-dev@incubator.apache.org
Subject: Re: [ACS4.2] LDAP UI
Pranav,
I was wondering we have API to get configuration, can't we reuse the same to get ldap config ?
-abhi
On 15/02/13 7:36 PM, "Pranav Saxena" <pr...@citrix.com> wrote:
>Abhi ,
>
>Just wanted to check with you if we have a list LDAP configuration API
>call in CS ? Because I would need this to list the current LDAP
>configuration on the UI , if it exists .
>
>Regards,
>Pranav
>
>-----Original Message-----
>From: Abhinandan Prateek [mailto:Abhinandan.Prateek@citrix.com]
>Sent: Thursday, February 14, 2013 12:27 PM
>To: cloudstack-dev@incubator.apache.org
>Subject: Re: [ACS4.2] LDAP UI
>
>
>On 14/02/13 11:30 AM, "David Nalley" <da...@gnsa.us> wrote:
>
>>On Thu, Feb 14, 2013 at 12:51 AM, Pranav Saxena
>><pr...@citrix.com> wrote:
>>> To configure LDAP , we need to pass in few multiple mandatory
>>>parameters -
>>>
>>> hostname Hostname or ip address of the ldap server eg:
>>>my.ldap.com
>>> queryfilter You specify a query filter here, which narrows down the
>>>users, who can be part of this domain.
>>> searchbase The search base defines the starting point for the
>>>search in the directory tree
>>>
>>> If you are referring to Global settings , that can be done but then
>>>we'll have to have three Ldap config parameters there . if that is a
>>>good design to handle this , then yes we can do that. Perhaps , the
>>>idea is to have a single dialog box where a user could supply three
>>>values and configure and debug them if something goes wrong.
>>
>>
>>Those are the mandatory API inputs for CloudStack.
>>But almost all environments will require username/password for binding
>>at a minimum, and you should probably, and prolly offer the SSL option
>>as well. Port should probably be an option too.
>>
>>Without at least bind creds, the API configuration is practically
>>useless on any modern LDAP server.
>>
>>--David
>
>The admin guide documents the LDAP API. SSL is supported.
>http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0
>.0-
>i
>ncubating/pdf/Admin_Guide/Apache_CloudStack-4.0.0-incubating-Admin_Guid
>e-e
>n
>-US.pdf
>
>Look for LDAP configuration. In short you have following config params:
>
>hostname
>searchbase
>queryfilter
>binddn
>bindpass
>port
>ssl
>truststore
>truststorepass
>response
>
>
>
>-abhi
>
>
>
>>
>
Re: [ACS4.2] LDAP UI branch Merged
Posted by Abhinandan Prateek <Ab...@citrix.com>.
LDAP enhancements are part of 4.2.
-abhi
On 21/02/13 4:06 PM, "Suresh Sadhu" <Su...@citrix.com> wrote:
>Thanks for your review comments ..I didn't see your UI changes in 4.1.
>branch .is it expected to be in 4.1 or 4.2?can you please confirm?
>
>
>Regards
>Sadhu
>
>
>-----Original Message-----
>From: Pranav Saxena
>Sent: 20 February 2013 00:45
>To: cloudstack-dev@incubator.apache.org; Suresh Sadhu; Abhinandan Prateek
>Subject: RE: [ACS4.2] LDAP UI branch Merged
>
>Btw,
>
>For the last test case you mentioned -
>
>1.Open the LDAP configuration Wizard(Navigate Global
>Setting-LdapConfiguration) 2. .Without providing any values,Click on "Ok"
>button
>
>You won't be allowed to do this , since to configure LDAP , you need to
>provide some set of mandatory parameters and hence your expected result
>i.e (dialogue window should prompt with proper error message) is not
>valid .
>
>Regards,
>Pranav
>
>-----Original Message-----
>From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
>Sent: Wednesday, February 20, 2013 12:32 AM
>To: Suresh Sadhu; cloudstack-dev@incubator.apache.org; Abhinandan Prateek
>Subject: RE: [ACS4.2] LDAP UI branch Merged
>
>Hi Sadhu ,
>
>The LDAP test plan looks good to me from the LDAP-UI integration point of
>view . In case of any issues , please feel free to create a JIRA ticket
>and assign it to me .
>
>Thanks,
>Pranav
>
>-----Original Message-----
>From: Suresh Sadhu
>Sent: Tuesday, February 19, 2013 11:32 PM
>To: cloudstack-dev@incubator.apache.org; Abhinandan Prateek
>Cc: Pranav Saxena
>Subject: RE: [ACS4.2] LDAP UI branch Merged
>
>Hi,
>
>Please review the following test plan for the feature "LDAP" and let me
>know the review comments.
>
>https://cwiki.apache.org/confluence/display/CLOUDSTACK/LDAP
>
>
>Regards
>Sadhu
>
>
>
>
>
>-----Original Message-----
>From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
>Sent: 19 February 2013 16:56
>To: Abhinandan Prateek; cloudstack-dev@incubator.apache.org
>Subject: RE: [ACS4.2] LDAP UI branch Merged
>
>Abhi ,
>
>I just completed the UI integration for this feature on my feature branch
>asf/LDAP-UI and have merged it with asf/master . You can go ahead and
>test the functionality .
>
>Thanks,
>Pranav
>
>-----Original Message-----
>From: Abhinandan Prateek
>Sent: Saturday, February 16, 2013 8:59 AM
>To: Pranav Saxena; cloudstack-dev@incubator.apache.org
>Subject: Re: [ACS4.2] LDAP UI
>
>Pranav,
> I was wondering we have API to get configuration, can't we reuse the
>same to get ldap config ?
>
>-abhi
>
>
>
>
>On 15/02/13 7:36 PM, "Pranav Saxena" <pr...@citrix.com> wrote:
>
>>Abhi ,
>>
>>Just wanted to check with you if we have a list LDAP configuration API
>>call in CS ? Because I would need this to list the current LDAP
>>configuration on the UI , if it exists .
>>
>>Regards,
>>Pranav
>>
>>-----Original Message-----
>>From: Abhinandan Prateek [mailto:Abhinandan.Prateek@citrix.com]
>>Sent: Thursday, February 14, 2013 12:27 PM
>>To: cloudstack-dev@incubator.apache.org
>>Subject: Re: [ACS4.2] LDAP UI
>>
>>
>>On 14/02/13 11:30 AM, "David Nalley" <da...@gnsa.us> wrote:
>>
>>>On Thu, Feb 14, 2013 at 12:51 AM, Pranav Saxena
>>><pr...@citrix.com> wrote:
>>>> To configure LDAP , we need to pass in few multiple mandatory
>>>>parameters -
>>>>
>>>> hostname Hostname or ip address of the ldap server eg:
>>>>my.ldap.com
>>>> queryfilter You specify a query filter here, which narrows down
>>>>the
>>>>users, who can be part of this domain.
>>>> searchbase The search base defines the starting point for the
>>>>search in the directory tree
>>>>
>>>> If you are referring to Global settings , that can be done but then
>>>>we'll have to have three Ldap config parameters there . if that is a
>>>>good design to handle this , then yes we can do that. Perhaps , the
>>>>idea is to have a single dialog box where a user could supply three
>>>>values and configure and debug them if something goes wrong.
>>>
>>>
>>>Those are the mandatory API inputs for CloudStack.
>>>But almost all environments will require username/password for binding
>>>at a minimum, and you should probably, and prolly offer the SSL option
>>>as well. Port should probably be an option too.
>>>
>>>Without at least bind creds, the API configuration is practically
>>>useless on any modern LDAP server.
>>>
>>>--David
>>
>>The admin guide documents the LDAP API. SSL is supported.
>>http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0
>>.0-
>>i
>>ncubating/pdf/Admin_Guide/Apache_CloudStack-4.0.0-incubating-Admin_Guid
>>e-e
>>n
>>-US.pdf
>>
>>Look for LDAP configuration. In short you have following config params:
>>
>>hostname
>>searchbase
>>queryfilter
>>binddn
>>bindpass
>>port
>>ssl
>>truststore
>>truststorepass
>>response
>>
>>
>>
>>-abhi
>>
>>
>>
>>>
>>
>
RE: [ACS4.2] LDAP UI branch Merged
Posted by Suresh Sadhu <Su...@citrix.com>.
Thanks for your review comments ..I didn't see your UI changes in 4.1. branch .is it expected to be in 4.1 or 4.2?can you please confirm?
Regards
Sadhu
-----Original Message-----
From: Pranav Saxena
Sent: 20 February 2013 00:45
To: cloudstack-dev@incubator.apache.org; Suresh Sadhu; Abhinandan Prateek
Subject: RE: [ACS4.2] LDAP UI branch Merged
Btw,
For the last test case you mentioned -
1.Open the LDAP configuration Wizard(Navigate Global Setting-LdapConfiguration) 2. .Without providing any values,Click on "Ok" button
You won't be allowed to do this , since to configure LDAP , you need to provide some set of mandatory parameters and hence your expected result i.e (dialogue window should prompt with proper error message) is not valid .
Regards,
Pranav
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: Wednesday, February 20, 2013 12:32 AM
To: Suresh Sadhu; cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Subject: RE: [ACS4.2] LDAP UI branch Merged
Hi Sadhu ,
The LDAP test plan looks good to me from the LDAP-UI integration point of view . In case of any issues , please feel free to create a JIRA ticket and assign it to me .
Thanks,
Pranav
-----Original Message-----
From: Suresh Sadhu
Sent: Tuesday, February 19, 2013 11:32 PM
To: cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Cc: Pranav Saxena
Subject: RE: [ACS4.2] LDAP UI branch Merged
Hi,
Please review the following test plan for the feature "LDAP" and let me know the review comments.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/LDAP
Regards
Sadhu
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: 19 February 2013 16:56
To: Abhinandan Prateek; cloudstack-dev@incubator.apache.org
Subject: RE: [ACS4.2] LDAP UI branch Merged
Abhi ,
I just completed the UI integration for this feature on my feature branch asf/LDAP-UI and have merged it with asf/master . You can go ahead and test the functionality .
Thanks,
Pranav
-----Original Message-----
From: Abhinandan Prateek
Sent: Saturday, February 16, 2013 8:59 AM
To: Pranav Saxena; cloudstack-dev@incubator.apache.org
Subject: Re: [ACS4.2] LDAP UI
Pranav,
I was wondering we have API to get configuration, can't we reuse the same to get ldap config ?
-abhi
On 15/02/13 7:36 PM, "Pranav Saxena" <pr...@citrix.com> wrote:
>Abhi ,
>
>Just wanted to check with you if we have a list LDAP configuration API
>call in CS ? Because I would need this to list the current LDAP
>configuration on the UI , if it exists .
>
>Regards,
>Pranav
>
>-----Original Message-----
>From: Abhinandan Prateek [mailto:Abhinandan.Prateek@citrix.com]
>Sent: Thursday, February 14, 2013 12:27 PM
>To: cloudstack-dev@incubator.apache.org
>Subject: Re: [ACS4.2] LDAP UI
>
>
>On 14/02/13 11:30 AM, "David Nalley" <da...@gnsa.us> wrote:
>
>>On Thu, Feb 14, 2013 at 12:51 AM, Pranav Saxena
>><pr...@citrix.com> wrote:
>>> To configure LDAP , we need to pass in few multiple mandatory
>>>parameters -
>>>
>>> hostname Hostname or ip address of the ldap server eg:
>>>my.ldap.com
>>> queryfilter You specify a query filter here, which narrows down the
>>>users, who can be part of this domain.
>>> searchbase The search base defines the starting point for the
>>>search in the directory tree
>>>
>>> If you are referring to Global settings , that can be done but then
>>>we'll have to have three Ldap config parameters there . if that is a
>>>good design to handle this , then yes we can do that. Perhaps , the
>>>idea is to have a single dialog box where a user could supply three
>>>values and configure and debug them if something goes wrong.
>>
>>
>>Those are the mandatory API inputs for CloudStack.
>>But almost all environments will require username/password for binding
>>at a minimum, and you should probably, and prolly offer the SSL option
>>as well. Port should probably be an option too.
>>
>>Without at least bind creds, the API configuration is practically
>>useless on any modern LDAP server.
>>
>>--David
>
>The admin guide documents the LDAP API. SSL is supported.
>http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0
>.0-
>i
>ncubating/pdf/Admin_Guide/Apache_CloudStack-4.0.0-incubating-Admin_Guid
>e-e
>n
>-US.pdf
>
>Look for LDAP configuration. In short you have following config params:
>
>hostname
>searchbase
>queryfilter
>binddn
>bindpass
>port
>ssl
>truststore
>truststorepass
>response
>
>
>
>-abhi
>
>
>
>>
>
RE: [ACS4.2] LDAP UI branch Merged
Posted by Pranav Saxena <pr...@citrix.com>.
Btw,
For the last test case you mentioned -
1.Open the LDAP configuration Wizard(Navigate Global Setting-LdapConfiguration)
2. .Without providing any values,Click on "Ok" button
You won't be allowed to do this , since to configure LDAP , you need to provide some set of mandatory parameters and hence your expected result i.e (dialogue window should prompt with proper error message) is not valid .
Regards,
Pranav
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: Wednesday, February 20, 2013 12:32 AM
To: Suresh Sadhu; cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Subject: RE: [ACS4.2] LDAP UI branch Merged
Hi Sadhu ,
The LDAP test plan looks good to me from the LDAP-UI integration point of view . In case of any issues , please feel free to create a JIRA ticket and assign it to me .
Thanks,
Pranav
-----Original Message-----
From: Suresh Sadhu
Sent: Tuesday, February 19, 2013 11:32 PM
To: cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Cc: Pranav Saxena
Subject: RE: [ACS4.2] LDAP UI branch Merged
Hi,
Please review the following test plan for the feature "LDAP" and let me know the review comments.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/LDAP
Regards
Sadhu
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: 19 February 2013 16:56
To: Abhinandan Prateek; cloudstack-dev@incubator.apache.org
Subject: RE: [ACS4.2] LDAP UI branch Merged
Abhi ,
I just completed the UI integration for this feature on my feature branch asf/LDAP-UI and have merged it with asf/master . You can go ahead and test the functionality .
Thanks,
Pranav
-----Original Message-----
From: Abhinandan Prateek
Sent: Saturday, February 16, 2013 8:59 AM
To: Pranav Saxena; cloudstack-dev@incubator.apache.org
Subject: Re: [ACS4.2] LDAP UI
Pranav,
I was wondering we have API to get configuration, can't we reuse the same to get ldap config ?
-abhi
On 15/02/13 7:36 PM, "Pranav Saxena" <pr...@citrix.com> wrote:
>Abhi ,
>
>Just wanted to check with you if we have a list LDAP configuration API
>call in CS ? Because I would need this to list the current LDAP
>configuration on the UI , if it exists .
>
>Regards,
>Pranav
>
>-----Original Message-----
>From: Abhinandan Prateek [mailto:Abhinandan.Prateek@citrix.com]
>Sent: Thursday, February 14, 2013 12:27 PM
>To: cloudstack-dev@incubator.apache.org
>Subject: Re: [ACS4.2] LDAP UI
>
>
>On 14/02/13 11:30 AM, "David Nalley" <da...@gnsa.us> wrote:
>
>>On Thu, Feb 14, 2013 at 12:51 AM, Pranav Saxena
>><pr...@citrix.com> wrote:
>>> To configure LDAP , we need to pass in few multiple mandatory
>>>parameters -
>>>
>>> hostname Hostname or ip address of the ldap server eg:
>>>my.ldap.com
>>> queryfilter You specify a query filter here, which narrows down the
>>>users, who can be part of this domain.
>>> searchbase The search base defines the starting point for the
>>>search in the directory tree
>>>
>>> If you are referring to Global settings , that can be done but then
>>>we'll have to have three Ldap config parameters there . if that is a
>>>good design to handle this , then yes we can do that. Perhaps , the
>>>idea is to have a single dialog box where a user could supply three
>>>values and configure and debug them if something goes wrong.
>>
>>
>>Those are the mandatory API inputs for CloudStack.
>>But almost all environments will require username/password for binding
>>at a minimum, and you should probably, and prolly offer the SSL option
>>as well. Port should probably be an option too.
>>
>>Without at least bind creds, the API configuration is practically
>>useless on any modern LDAP server.
>>
>>--David
>
>The admin guide documents the LDAP API. SSL is supported.
>http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0
>.0-
>i
>ncubating/pdf/Admin_Guide/Apache_CloudStack-4.0.0-incubating-Admin_Guid
>e-e
>n
>-US.pdf
>
>Look for LDAP configuration. In short you have following config params:
>
>hostname
>searchbase
>queryfilter
>binddn
>bindpass
>port
>ssl
>truststore
>truststorepass
>response
>
>
>
>-abhi
>
>
>
>>
>
RE: [ACS4.2] LDAP UI branch Merged
Posted by Pranav Saxena <pr...@citrix.com>.
Hi Sadhu ,
The LDAP test plan looks good to me from the LDAP-UI integration point of view . In case of any issues , please feel free to create a JIRA ticket and assign it to me .
Thanks,
Pranav
-----Original Message-----
From: Suresh Sadhu
Sent: Tuesday, February 19, 2013 11:32 PM
To: cloudstack-dev@incubator.apache.org; Abhinandan Prateek
Cc: Pranav Saxena
Subject: RE: [ACS4.2] LDAP UI branch Merged
Hi,
Please review the following test plan for the feature "LDAP" and let me know the review comments.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/LDAP
Regards
Sadhu
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: 19 February 2013 16:56
To: Abhinandan Prateek; cloudstack-dev@incubator.apache.org
Subject: RE: [ACS4.2] LDAP UI branch Merged
Abhi ,
I just completed the UI integration for this feature on my feature branch asf/LDAP-UI and have merged it with asf/master . You can go ahead and test the functionality .
Thanks,
Pranav
-----Original Message-----
From: Abhinandan Prateek
Sent: Saturday, February 16, 2013 8:59 AM
To: Pranav Saxena; cloudstack-dev@incubator.apache.org
Subject: Re: [ACS4.2] LDAP UI
Pranav,
I was wondering we have API to get configuration, can't we reuse the same to get ldap config ?
-abhi
On 15/02/13 7:36 PM, "Pranav Saxena" <pr...@citrix.com> wrote:
>Abhi ,
>
>Just wanted to check with you if we have a list LDAP configuration API
>call in CS ? Because I would need this to list the current LDAP
>configuration on the UI , if it exists .
>
>Regards,
>Pranav
>
>-----Original Message-----
>From: Abhinandan Prateek [mailto:Abhinandan.Prateek@citrix.com]
>Sent: Thursday, February 14, 2013 12:27 PM
>To: cloudstack-dev@incubator.apache.org
>Subject: Re: [ACS4.2] LDAP UI
>
>
>On 14/02/13 11:30 AM, "David Nalley" <da...@gnsa.us> wrote:
>
>>On Thu, Feb 14, 2013 at 12:51 AM, Pranav Saxena
>><pr...@citrix.com> wrote:
>>> To configure LDAP , we need to pass in few multiple mandatory
>>>parameters -
>>>
>>> hostname Hostname or ip address of the ldap server eg:
>>>my.ldap.com
>>> queryfilter You specify a query filter here, which narrows down the
>>>users, who can be part of this domain.
>>> searchbase The search base defines the starting point for the
>>>search in the directory tree
>>>
>>> If you are referring to Global settings , that can be done but then
>>>we'll have to have three Ldap config parameters there . if that is a
>>>good design to handle this , then yes we can do that. Perhaps , the
>>>idea is to have a single dialog box where a user could supply three
>>>values and configure and debug them if something goes wrong.
>>
>>
>>Those are the mandatory API inputs for CloudStack.
>>But almost all environments will require username/password for binding
>>at a minimum, and you should probably, and prolly offer the SSL option
>>as well. Port should probably be an option too.
>>
>>Without at least bind creds, the API configuration is practically
>>useless on any modern LDAP server.
>>
>>--David
>
>The admin guide documents the LDAP API. SSL is supported.
>http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0
>.0-
>i
>ncubating/pdf/Admin_Guide/Apache_CloudStack-4.0.0-incubating-Admin_Guid
>e-e
>n
>-US.pdf
>
>Look for LDAP configuration. In short you have following config params:
>
>hostname
>searchbase
>queryfilter
>binddn
>bindpass
>port
>ssl
>truststore
>truststorepass
>response
>
>
>
>-abhi
>
>
>
>>
>
RE: [ACS4.2] LDAP UI branch Merged
Posted by Suresh Sadhu <Su...@citrix.com>.
Hi,
Please review the following test plan for the feature "LDAP" and let me know the review comments.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/LDAP
Regards
Sadhu
-----Original Message-----
From: Pranav Saxena [mailto:pranav.saxena@citrix.com]
Sent: 19 February 2013 16:56
To: Abhinandan Prateek; cloudstack-dev@incubator.apache.org
Subject: RE: [ACS4.2] LDAP UI branch Merged
Abhi ,
I just completed the UI integration for this feature on my feature branch asf/LDAP-UI and have merged it with asf/master . You can go ahead and test the functionality .
Thanks,
Pranav
-----Original Message-----
From: Abhinandan Prateek
Sent: Saturday, February 16, 2013 8:59 AM
To: Pranav Saxena; cloudstack-dev@incubator.apache.org
Subject: Re: [ACS4.2] LDAP UI
Pranav,
I was wondering we have API to get configuration, can't we reuse the same to get ldap config ?
-abhi
On 15/02/13 7:36 PM, "Pranav Saxena" <pr...@citrix.com> wrote:
>Abhi ,
>
>Just wanted to check with you if we have a list LDAP configuration API
>call in CS ? Because I would need this to list the current LDAP
>configuration on the UI , if it exists .
>
>Regards,
>Pranav
>
>-----Original Message-----
>From: Abhinandan Prateek [mailto:Abhinandan.Prateek@citrix.com]
>Sent: Thursday, February 14, 2013 12:27 PM
>To: cloudstack-dev@incubator.apache.org
>Subject: Re: [ACS4.2] LDAP UI
>
>
>On 14/02/13 11:30 AM, "David Nalley" <da...@gnsa.us> wrote:
>
>>On Thu, Feb 14, 2013 at 12:51 AM, Pranav Saxena
>><pr...@citrix.com> wrote:
>>> To configure LDAP , we need to pass in few multiple mandatory
>>>parameters -
>>>
>>> hostname Hostname or ip address of the ldap server eg:
>>>my.ldap.com
>>> queryfilter You specify a query filter here, which narrows down the
>>>users, who can be part of this domain.
>>> searchbase The search base defines the starting point for the
>>>search in the directory tree
>>>
>>> If you are referring to Global settings , that can be done but then
>>>we'll have to have three Ldap config parameters there . if that is a
>>>good design to handle this , then yes we can do that. Perhaps , the
>>>idea is to have a single dialog box where a user could supply three
>>>values and configure and debug them if something goes wrong.
>>
>>
>>Those are the mandatory API inputs for CloudStack.
>>But almost all environments will require username/password for binding
>>at a minimum, and you should probably, and prolly offer the SSL option
>>as well. Port should probably be an option too.
>>
>>Without at least bind creds, the API configuration is practically
>>useless on any modern LDAP server.
>>
>>--David
>
>The admin guide documents the LDAP API. SSL is supported.
>http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0
>.0-
>i
>ncubating/pdf/Admin_Guide/Apache_CloudStack-4.0.0-incubating-Admin_Guid
>e-e
>n
>-US.pdf
>
>Look for LDAP configuration. In short you have following config params:
>
>hostname
>searchbase
>queryfilter
>binddn
>bindpass
>port
>ssl
>truststore
>truststorepass
>response
>
>
>
>-abhi
>
>
>
>>
>