You are viewing a plain text version of this content. The canonical link for it is here.

Posted to mapreduce-user@hadoop.apache.org by Gino Gu01 <Gi...@infosys.com> on 2014/12/04 06:32:09 UTC

How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print "Mapper value =" in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn't work.

Thanks

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

RE: How do I enable debug mode

Posted by Gino Gu01 <Gi...@infosys.com>.

Hi Rohith Sharma K S,

Thanks for your help.
After adding below four lines to hadoop-2.5.1/etc/hadoop/ log4j.properties,
“Mapper value =” still not got printed out.

yarn.app.mapreduce.am.log.level=DEBUG
mapreduce.map.log.level=DEBUG
mapreduce.reduce.log.level=DEBUG
log4j.logger.org.apache.hadoop = DEBUG

From: Rohith Sharma K S [mailto:rohithsharmaks@huawei.com]
Sent: Thursday, December 04, 2014 11:04 PM
To: user@hadoop.apache.org
Subject: RE: How do I enable debug mode

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

RE: How do I enable debug mode

Posted by Gino Gu01 <Gi...@infosys.com>.

Hi Rohith Sharma K S,

Thanks for your help.
After adding below four lines to hadoop-2.5.1/etc/hadoop/ log4j.properties,
“Mapper value =” still not got printed out.

yarn.app.mapreduce.am.log.level=DEBUG
mapreduce.map.log.level=DEBUG
mapreduce.reduce.log.level=DEBUG
log4j.logger.org.apache.hadoop = DEBUG

From: Rohith Sharma K S [mailto:rohithsharmaks@huawei.com]
Sent: Thursday, December 04, 2014 11:04 PM
To: user@hadoop.apache.org
Subject: RE: How do I enable debug mode

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

RE: How do I enable debug mode

Posted by Gino Gu01 <Gi...@infosys.com>.

Hi Rohith Sharma K S,

Thanks for your help.
After adding below four lines to hadoop-2.5.1/etc/hadoop/ log4j.properties,
“Mapper value =” still not got printed out.

yarn.app.mapreduce.am.log.level=DEBUG
mapreduce.map.log.level=DEBUG
mapreduce.reduce.log.level=DEBUG
log4j.logger.org.apache.hadoop = DEBUG

From: Rohith Sharma K S [mailto:rohithsharmaks@huawei.com]
Sent: Thursday, December 04, 2014 11:04 PM
To: user@hadoop.apache.org
Subject: RE: How do I enable debug mode

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

RE: How do I enable debug mode

Posted by Gino Gu01 <Gi...@infosys.com>.

Hi Rohith Sharma K S,

Thanks for your help.
After adding below four lines to hadoop-2.5.1/etc/hadoop/ log4j.properties,
“Mapper value =” still not got printed out.

yarn.app.mapreduce.am.log.level=DEBUG
mapreduce.map.log.level=DEBUG
mapreduce.reduce.log.level=DEBUG
log4j.logger.org.apache.hadoop = DEBUG

From: Rohith Sharma K S [mailto:rohithsharmaks@huawei.com]
Sent: Thursday, December 04, 2014 11:04 PM
To: user@hadoop.apache.org
Subject: RE: How do I enable debug mode

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

RE: How do I enable debug mode

Posted by Rohith Sharma K S <ro...@huawei.com>.

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

RE: How do I enable debug mode

Posted by Rohith Sharma K S <ro...@huawei.com>.

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

Re: How do I enable debug mode

Posted by adarsh deshratnam <ad...@gmail.com>.

It seems log4j is not configured properly.

try putting  below line in log4.properties again

log4j.logger.org.apache.hadoop = DEBUG


Thanks,

Adarsh D


On Thu, Dec 4, 2014 at 11:02 AM, Gino Gu01 <Gi...@infosys.com> wrote:

>  Hello,
>
>
>
> I have below code in mapreduce program.
>
>             *if*(*logger*.isDebugEnabled()){
>
>                 *logger*.info("Mapper value =" + value);
>
>             }
>
>
>
> How do I enable debug mode  to print “Mapper value =” in the logs.
>
> I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still
> doesn’t work.
>
>
>
> Thanks
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
> for the use of the addressee(s). If you are not the intended recipient, please
> notify the sender by e-mail and delete the original message. Further, you are not
> to copy, disclose, or distribute this e-mail or its contents to any other person and
> any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
> every reasonable precaution to minimize this risk, but is not liable for any damage
> you may sustain as a result of any virus in this e-mail. You should carry out your
> own virus checks before opening the e-mail or attachment. Infosys reserves the
> right to monitor and review the content of all messages sent to or from this e-mail
> address. Messages sent to or from this e-mail address may be stored on the
> Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
>

RE: How do I enable debug mode

Posted by Rohith Sharma K S <ro...@huawei.com>.

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

Re: How do I enable debug mode

Posted by adarsh deshratnam <ad...@gmail.com>.

It seems log4j is not configured properly.

try putting  below line in log4.properties again

log4j.logger.org.apache.hadoop = DEBUG


Thanks,

Adarsh D


On Thu, Dec 4, 2014 at 11:02 AM, Gino Gu01 <Gi...@infosys.com> wrote:

>  Hello,
>
>
>
> I have below code in mapreduce program.
>
>             *if*(*logger*.isDebugEnabled()){
>
>                 *logger*.info("Mapper value =" + value);
>
>             }
>
>
>
> How do I enable debug mode  to print “Mapper value =” in the logs.
>
> I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still
> doesn’t work.
>
>
>
> Thanks
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
> for the use of the addressee(s). If you are not the intended recipient, please
> notify the sender by e-mail and delete the original message. Further, you are not
> to copy, disclose, or distribute this e-mail or its contents to any other person and
> any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
> every reasonable precaution to minimize this risk, but is not liable for any damage
> you may sustain as a result of any virus in this e-mail. You should carry out your
> own virus checks before opening the e-mail or attachment. Infosys reserves the
> right to monitor and review the content of all messages sent to or from this e-mail
> address. Messages sent to or from this e-mail address may be stored on the
> Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
>

RE: How do I enable debug mode

Posted by Rohith Sharma K S <ro...@huawei.com>.

You can use below configuration at client for changing log level at MR

ApplicationMaster :        yarn.app.mapreduce.am.log.level=DEBUG
Mapper :             mapreduce.map.log.level=DEBUG
Reducer :             mapreduce.reduce.log.level=DEBUG

Thanks & Regards
Rohith Sharma K S

This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

From: Gino Gu01 [mailto:Gino_Gu01@infosys.com]
Sent: 04 December 2014 13:32
To: user@hadoop.apache.org
Subject: How do I enable debug mode

Hello,

I have below code in mapreduce program.
            if(logger.isDebugEnabled()){
                logger.info("Mapper value =" + value);
            }

How do I enable debug mode  to print “Mapper value =” in the logs.
I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still doesn’t work.

Thanks

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

Re: How do I enable debug mode

Posted by adarsh deshratnam <ad...@gmail.com>.

It seems log4j is not configured properly.

try putting  below line in log4.properties again

log4j.logger.org.apache.hadoop = DEBUG


Thanks,

Adarsh D


On Thu, Dec 4, 2014 at 11:02 AM, Gino Gu01 <Gi...@infosys.com> wrote:

>  Hello,
>
>
>
> I have below code in mapreduce program.
>
>             *if*(*logger*.isDebugEnabled()){
>
>                 *logger*.info("Mapper value =" + value);
>
>             }
>
>
>
> How do I enable debug mode  to print “Mapper value =” in the logs.
>
> I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still
> doesn’t work.
>
>
>
> Thanks
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
> for the use of the addressee(s). If you are not the intended recipient, please
> notify the sender by e-mail and delete the original message. Further, you are not
> to copy, disclose, or distribute this e-mail or its contents to any other person and
> any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
> every reasonable precaution to minimize this risk, but is not liable for any damage
> you may sustain as a result of any virus in this e-mail. You should carry out your
> own virus checks before opening the e-mail or attachment. Infosys reserves the
> right to monitor and review the content of all messages sent to or from this e-mail
> address. Messages sent to or from this e-mail address may be stored on the
> Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
>

Re: How do I enable debug mode

Posted by adarsh deshratnam <ad...@gmail.com>.

It seems log4j is not configured properly.

try putting  below line in log4.properties again

log4j.logger.org.apache.hadoop = DEBUG


Thanks,

Adarsh D


On Thu, Dec 4, 2014 at 11:02 AM, Gino Gu01 <Gi...@infosys.com> wrote:

>  Hello,
>
>
>
> I have below code in mapreduce program.
>
>             *if*(*logger*.isDebugEnabled()){
>
>                 *logger*.info("Mapper value =" + value);
>
>             }
>
>
>
> How do I enable debug mode  to print “Mapper value =” in the logs.
>
> I tried modifying hadoop-2.5.1/etc/hadoop/ log4j.properties, and it still
> doesn’t work.
>
>
>
> Thanks
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
> for the use of the addressee(s). If you are not the intended recipient, please
> notify the sender by e-mail and delete the original message. Further, you are not
> to copy, disclose, or distribute this e-mail or its contents to any other person and
> any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
> every reasonable precaution to minimize this risk, but is not liable for any damage
> you may sustain as a result of any virus in this e-mail. You should carry out your
> own virus checks before opening the e-mail or attachment. Infosys reserves the
> right to monitor and review the content of all messages sent to or from this e-mail
> address. Messages sent to or from this e-mail address may be stored on the
> Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
>