You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@couchdb.apache.org by be...@apache.org on 2014/02/15 10:49:28 UTC
[22/59] [abbrv] remove couch_collate
http://git-wip-us.apache.org/repos/asf/couchdb/blob/81332b78/apps/couch_collate/platform/osx/icu/unicode/ubidi.h
----------------------------------------------------------------------
diff --git a/apps/couch_collate/platform/osx/icu/unicode/ubidi.h b/apps/couch_collate/platform/osx/icu/unicode/ubidi.h
deleted file mode 100644
index 25f22b9..0000000
--- a/apps/couch_collate/platform/osx/icu/unicode/ubidi.h
+++ /dev/null
@@ -1,2013 +0,0 @@
-/*
-******************************************************************************
-*
-* Copyright (C) 1999-2008, International Business Machines
-* Corporation and others. All Rights Reserved.
-*
-******************************************************************************
-* file name: ubidi.h
-* encoding: US-ASCII
-* tab size: 8 (not used)
-* indentation:4
-*
-* created on: 1999jul27
-* created by: Markus W. Scherer, updated by Matitiahu Allouche
-*/
-
-#ifndef UBIDI_H
-#define UBIDI_H
-
-#include "unicode/utypes.h"
-#include "unicode/uchar.h"
-
-/**
- *\file
- * \brief C API: Bidi algorithm
- *
- * <h2>Bidi algorithm for ICU</h2>
- *
- * This is an implementation of the Unicode Bidirectional algorithm.
- * The algorithm is defined in the
- * <a href="http://www.unicode.org/unicode/reports/tr9/">Unicode Standard Annex #9</a>,
- * version 13, also described in The Unicode Standard, Version 4.0 .<p>
- *
- * Note: Libraries that perform a bidirectional algorithm and
- * reorder strings accordingly are sometimes called "Storage Layout Engines".
- * ICU's Bidi and shaping (u_shapeArabic()) APIs can be used at the core of such
- * "Storage Layout Engines".
- *
- * <h3>General remarks about the API:</h3>
- *
- * In functions with an error code parameter,
- * the <code>pErrorCode</code> pointer must be valid
- * and the value that it points to must not indicate a failure before
- * the function call. Otherwise, the function returns immediately.
- * After the function call, the value indicates success or failure.<p>
- *
- * The "limit" of a sequence of characters is the position just after their
- * last character, i.e., one more than that position.<p>
- *
- * Some of the API functions provide access to "runs".
- * Such a "run" is defined as a sequence of characters
- * that are at the same embedding level
- * after performing the Bidi algorithm.<p>
- *
- * @author Markus W. Scherer
- * @version 1.0
- *
- *
- * <h4> Sample code for the ICU Bidi API </h4>
- *
- * <h5>Rendering a paragraph with the ICU Bidi API</h5>
- *
- * This is (hypothetical) sample code that illustrates
- * how the ICU Bidi API could be used to render a paragraph of text.
- * Rendering code depends highly on the graphics system,
- * therefore this sample code must make a lot of assumptions,
- * which may or may not match any existing graphics system's properties.
- *
- * <p>The basic assumptions are:</p>
- * <ul>
- * <li>Rendering is done from left to right on a horizontal line.</li>
- * <li>A run of single-style, unidirectional text can be rendered at once.</li>
- * <li>Such a run of text is passed to the graphics system with
- * characters (code units) in logical order.</li>
- * <li>The line-breaking algorithm is very complicated
- * and Locale-dependent -
- * and therefore its implementation omitted from this sample code.</li>
- * </ul>
- *
- * <pre>
- * \code
- *#include "unicode/ubidi.h"
- *
- *typedef enum {
- * styleNormal=0, styleSelected=1,
- * styleBold=2, styleItalics=4,
- * styleSuper=8, styleSub=16
- *} Style;
- *
- *typedef struct { int32_t limit; Style style; } StyleRun;
- *
- *int getTextWidth(const UChar *text, int32_t start, int32_t limit,
- * const StyleRun *styleRuns, int styleRunCount);
- *
- * // set *pLimit and *pStyleRunLimit for a line
- * // from text[start] and from styleRuns[styleRunStart]
- * // using ubidi_getLogicalRun(para, ...)
- *void getLineBreak(const UChar *text, int32_t start, int32_t *pLimit,
- * UBiDi *para,
- * const StyleRun *styleRuns, int styleRunStart, int *pStyleRunLimit,
- * int *pLineWidth);
- *
- * // render runs on a line sequentially, always from left to right
- *
- * // prepare rendering a new line
- * void startLine(UBiDiDirection textDirection, int lineWidth);
- *
- * // render a run of text and advance to the right by the run width
- * // the text[start..limit-1] is always in logical order
- * void renderRun(const UChar *text, int32_t start, int32_t limit,
- * UBiDiDirection textDirection, Style style);
- *
- * // We could compute a cross-product
- * // from the style runs with the directional runs
- * // and then reorder it.
- * // Instead, here we iterate over each run type
- * // and render the intersections -
- * // with shortcuts in simple (and common) cases.
- * // renderParagraph() is the main function.
- *
- * // render a directional run with
- * // (possibly) multiple style runs intersecting with it
- * void renderDirectionalRun(const UChar *text,
- * int32_t start, int32_t limit,
- * UBiDiDirection direction,
- * const StyleRun *styleRuns, int styleRunCount) {
- * int i;
- *
- * // iterate over style runs
- * if(direction==UBIDI_LTR) {
- * int styleLimit;
- *
- * for(i=0; i<styleRunCount; ++i) {
- * styleLimit=styleRun[i].limit;
- * if(start<styleLimit) {
- * if(styleLimit>limit) { styleLimit=limit; }
- * renderRun(text, start, styleLimit,
- * direction, styleRun[i].style);
- * if(styleLimit==limit) { break; }
- * start=styleLimit;
- * }
- * }
- * } else {
- * int styleStart;
- *
- * for(i=styleRunCount-1; i>=0; --i) {
- * if(i>0) {
- * styleStart=styleRun[i-1].limit;
- * } else {
- * styleStart=0;
- * }
- * if(limit>=styleStart) {
- * if(styleStart<start) { styleStart=start; }
- * renderRun(text, styleStart, limit,
- * direction, styleRun[i].style);
- * if(styleStart==start) { break; }
- * limit=styleStart;
- * }
- * }
- * }
- * }
- *
- * // the line object represents text[start..limit-1]
- * void renderLine(UBiDi *line, const UChar *text,
- * int32_t start, int32_t limit,
- * const StyleRun *styleRuns, int styleRunCount) {
- * UBiDiDirection direction=ubidi_getDirection(line);
- * if(direction!=UBIDI_MIXED) {
- * // unidirectional
- * if(styleRunCount<=1) {
- * renderRun(text, start, limit, direction, styleRuns[0].style);
- * } else {
- * renderDirectionalRun(text, start, limit,
- * direction, styleRuns, styleRunCount);
- * }
- * } else {
- * // mixed-directional
- * int32_t count, i, length;
- * UBiDiLevel level;
- *
- * count=ubidi_countRuns(para, pErrorCode);
- * if(U_SUCCESS(*pErrorCode)) {
- * if(styleRunCount<=1) {
- * Style style=styleRuns[0].style;
- *
- * // iterate over directional runs
- * for(i=0; i<count; ++i) {
- * direction=ubidi_getVisualRun(para, i, &start, &length);
- * renderRun(text, start, start+length, direction, style);
- * }
- * } else {
- * int32_t j;
- *
- * // iterate over both directional and style runs
- * for(i=0; i<count; ++i) {
- * direction=ubidi_getVisualRun(line, i, &start, &length);
- * renderDirectionalRun(text, start, start+length,
- * direction, styleRuns, styleRunCount);
- * }
- * }
- * }
- * }
- * }
- *
- *void renderParagraph(const UChar *text, int32_t length,
- * UBiDiDirection textDirection,
- * const StyleRun *styleRuns, int styleRunCount,
- * int lineWidth,
- * UErrorCode *pErrorCode) {
- * UBiDi *para;
- *
- * if(pErrorCode==NULL || U_FAILURE(*pErrorCode) || length<=0) {
- * return;
- * }
- *
- * para=ubidi_openSized(length, 0, pErrorCode);
- * if(para==NULL) { return; }
- *
- * ubidi_setPara(para, text, length,
- * textDirection ? UBIDI_DEFAULT_RTL : UBIDI_DEFAULT_LTR,
- * NULL, pErrorCode);
- * if(U_SUCCESS(*pErrorCode)) {
- * UBiDiLevel paraLevel=1&ubidi_getParaLevel(para);
- * StyleRun styleRun={ length, styleNormal };
- * int width;
- *
- * if(styleRuns==NULL || styleRunCount<=0) {
- * styleRunCount=1;
- * styleRuns=&styleRun;
- * }
- *
- * // assume styleRuns[styleRunCount-1].limit>=length
- *
- * width=getTextWidth(text, 0, length, styleRuns, styleRunCount);
- * if(width<=lineWidth) {
- * // everything fits onto one line
- *
- * // prepare rendering a new line from either left or right
- * startLine(paraLevel, width);
- *
- * renderLine(para, text, 0, length,
- * styleRuns, styleRunCount);
- * } else {
- * UBiDi *line;
- *
- * // we need to render several lines
- * line=ubidi_openSized(length, 0, pErrorCode);
- * if(line!=NULL) {
- * int32_t start=0, limit;
- * int styleRunStart=0, styleRunLimit;
- *
- * for(;;) {
- * limit=length;
- * styleRunLimit=styleRunCount;
- * getLineBreak(text, start, &limit, para,
- * styleRuns, styleRunStart, &styleRunLimit,
- * &width);
- * ubidi_setLine(para, start, limit, line, pErrorCode);
- * if(U_SUCCESS(*pErrorCode)) {
- * // prepare rendering a new line
- * // from either left or right
- * startLine(paraLevel, width);
- *
- * renderLine(line, text, start, limit,
- * styleRuns+styleRunStart,
- * styleRunLimit-styleRunStart);
- * }
- * if(limit==length) { break; }
- * start=limit;
- * styleRunStart=styleRunLimit-1;
- * if(start>=styleRuns[styleRunStart].limit) {
- * ++styleRunStart;
- * }
- * }
- *
- * ubidi_close(line);
- * }
- * }
- * }
- *
- * ubidi_close(para);
- *}
- *\endcode
- * </pre>
- */
-
-/*DOCXX_TAG*/
-/*@{*/
-
-/**
- * UBiDiLevel is the type of the level values in this
- * Bidi implementation.
- * It holds an embedding level and indicates the visual direction
- * by its bit 0 (even/odd value).<p>
- *
- * It can also hold non-level values for the
- * <code>paraLevel</code> and <code>embeddingLevels</code>
- * arguments of <code>ubidi_setPara()</code>; there:
- * <ul>
- * <li>bit 7 of an <code>embeddingLevels[]</code>
- * value indicates whether the using application is
- * specifying the level of a character to <i>override</i> whatever the
- * Bidi implementation would resolve it to.</li>
- * <li><code>paraLevel</code> can be set to the
- * pseudo-level values <code>UBIDI_DEFAULT_LTR</code>
- * and <code>UBIDI_DEFAULT_RTL</code>.</li>
- * </ul>
- *
- * @see ubidi_setPara
- *
- * <p>The related constants are not real, valid level values.
- * <code>UBIDI_DEFAULT_XXX</code> can be used to specify
- * a default for the paragraph level for
- * when the <code>ubidi_setPara()</code> function
- * shall determine it but there is no
- * strongly typed character in the input.<p>
- *
- * Note that the value for <code>UBIDI_DEFAULT_LTR</code> is even
- * and the one for <code>UBIDI_DEFAULT_RTL</code> is odd,
- * just like with normal LTR and RTL level values -
- * these special values are designed that way. Also, the implementation
- * assumes that UBIDI_MAX_EXPLICIT_LEVEL is odd.
- *
- * @see UBIDI_DEFAULT_LTR
- * @see UBIDI_DEFAULT_RTL
- * @see UBIDI_LEVEL_OVERRIDE
- * @see UBIDI_MAX_EXPLICIT_LEVEL
- * @stable ICU 2.0
- */
-typedef uint8_t UBiDiLevel;
-
-/** Paragraph level setting.<p>
- *
- * Constant indicating that the base direction depends on the first strong
- * directional character in the text according to the Unicode Bidirectional
- * Algorithm. If no strong directional character is present,
- * then set the paragraph level to 0 (left-to-right).<p>
- *
- * If this value is used in conjunction with reordering modes
- * <code>UBIDI_REORDER_INVERSE_LIKE_DIRECT</code> or
- * <code>UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code>, the text to reorder
- * is assumed to be visual LTR, and the text after reordering is required
- * to be the corresponding logical string with appropriate contextual
- * direction. The direction of the result string will be RTL if either
- * the righmost or leftmost strong character of the source text is RTL
- * or Arabic Letter, the direction will be LTR otherwise.<p>
- *
- * If reordering option <code>UBIDI_OPTION_INSERT_MARKS</code> is set, an RLM may
- * be added at the beginning of the result string to ensure round trip
- * (that the result string, when reordered back to visual, will produce
- * the original source text).
- * @see UBIDI_REORDER_INVERSE_LIKE_DIRECT
- * @see UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL
- * @stable ICU 2.0
- */
-#define UBIDI_DEFAULT_LTR 0xfe
-
-/** Paragraph level setting.<p>
- *
- * Constant indicating that the base direction depends on the first strong
- * directional character in the text according to the Unicode Bidirectional
- * Algorithm. If no strong directional character is present,
- * then set the paragraph level to 1 (right-to-left).<p>
- *
- * If this value is used in conjunction with reordering modes
- * <code>UBIDI_REORDER_INVERSE_LIKE_DIRECT</code> or
- * <code>UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code>, the text to reorder
- * is assumed to be visual LTR, and the text after reordering is required
- * to be the corresponding logical string with appropriate contextual
- * direction. The direction of the result string will be RTL if either
- * the righmost or leftmost strong character of the source text is RTL
- * or Arabic Letter, or if the text contains no strong character;
- * the direction will be LTR otherwise.<p>
- *
- * If reordering option <code>UBIDI_OPTION_INSERT_MARKS</code> is set, an RLM may
- * be added at the beginning of the result string to ensure round trip
- * (that the result string, when reordered back to visual, will produce
- * the original source text).
- * @see UBIDI_REORDER_INVERSE_LIKE_DIRECT
- * @see UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL
- * @stable ICU 2.0
- */
-#define UBIDI_DEFAULT_RTL 0xff
-
-/**
- * Maximum explicit embedding level.
- * (The maximum resolved level can be up to <code>UBIDI_MAX_EXPLICIT_LEVEL+1</code>).
- * @stable ICU 2.0
- */
-#define UBIDI_MAX_EXPLICIT_LEVEL 61
-
-/** Bit flag for level input.
- * Overrides directional properties.
- * @stable ICU 2.0
- */
-#define UBIDI_LEVEL_OVERRIDE 0x80
-
-/**
- * Special value which can be returned by the mapping functions when a logical
- * index has no corresponding visual index or vice-versa. This may happen
- * for the logical-to-visual mapping of a Bidi control when option
- * <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> is specified. This can also happen
- * for the visual-to-logical mapping of a Bidi mark (LRM or RLM) inserted
- * by option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
- * @see ubidi_getVisualIndex
- * @see ubidi_getVisualMap
- * @see ubidi_getLogicalIndex
- * @see ubidi_getLogicalMap
- * @stable ICU 3.6
- */
-#define UBIDI_MAP_NOWHERE (-1)
-
-/**
- * <code>UBiDiDirection</code> values indicate the text direction.
- * @stable ICU 2.0
- */
-enum UBiDiDirection {
- /** All left-to-right text. This is a 0 value. @stable ICU 2.0 */
- UBIDI_LTR,
- /** All right-to-left text. This is a 1 value. @stable ICU 2.0 */
- UBIDI_RTL,
- /** Mixed-directional text. @stable ICU 2.0 */
- UBIDI_MIXED
-};
-
-/** @stable ICU 2.0 */
-typedef enum UBiDiDirection UBiDiDirection;
-
-/**
- * Forward declaration of the <code>UBiDi</code> structure for the declaration of
- * the API functions. Its fields are implementation-specific.<p>
- * This structure holds information about a paragraph (or multiple paragraphs)
- * of text with Bidi-algorithm-related details, or about one line of
- * such a paragraph.<p>
- * Reordering can be done on a line, or on one or more paragraphs which are
- * then interpreted each as one single line.
- * @stable ICU 2.0
- */
-struct UBiDi;
-
-/** @stable ICU 2.0 */
-typedef struct UBiDi UBiDi;
-
-/**
- * Allocate a <code>UBiDi</code> structure.
- * Such an object is initially empty. It is assigned
- * the Bidi properties of a piece of text containing one or more paragraphs
- * by <code>ubidi_setPara()</code>
- * or the Bidi properties of a line within a paragraph by
- * <code>ubidi_setLine()</code>.<p>
- * This object can be reused for as long as it is not deallocated
- * by calling <code>ubidi_close()</code>.<p>
- * <code>ubidi_setPara()</code> and <code>ubidi_setLine()</code> will allocate
- * additional memory for internal structures as necessary.
- *
- * @return An empty <code>UBiDi</code> object.
- * @stable ICU 2.0
- */
-U_STABLE UBiDi * U_EXPORT2
-ubidi_open(void);
-
-/**
- * Allocate a <code>UBiDi</code> structure with preallocated memory
- * for internal structures.
- * This function provides a <code>UBiDi</code> object like <code>ubidi_open()</code>
- * with no arguments, but it also preallocates memory for internal structures
- * according to the sizings supplied by the caller.<p>
- * Subsequent functions will not allocate any more memory, and are thus
- * guaranteed not to fail because of lack of memory.<p>
- * The preallocation can be limited to some of the internal memory
- * by setting some values to 0 here. That means that if, e.g.,
- * <code>maxRunCount</code> cannot be reasonably predetermined and should not
- * be set to <code>maxLength</code> (the only failproof value) to avoid
- * wasting memory, then <code>maxRunCount</code> could be set to 0 here
- * and the internal structures that are associated with it will be allocated
- * on demand, just like with <code>ubidi_open()</code>.
- *
- * @param maxLength is the maximum text or line length that internal memory
- * will be preallocated for. An attempt to associate this object with a
- * longer text will fail, unless this value is 0, which leaves the allocation
- * up to the implementation.
- *
- * @param maxRunCount is the maximum anticipated number of same-level runs
- * that internal memory will be preallocated for. An attempt to access
- * visual runs on an object that was not preallocated for as many runs
- * as the text was actually resolved to will fail,
- * unless this value is 0, which leaves the allocation up to the implementation.<br><br>
- * The number of runs depends on the actual text and maybe anywhere between
- * 1 and <code>maxLength</code>. It is typically small.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return An empty <code>UBiDi</code> object with preallocated memory.
- * @stable ICU 2.0
- */
-U_STABLE UBiDi * U_EXPORT2
-ubidi_openSized(int32_t maxLength, int32_t maxRunCount, UErrorCode *pErrorCode);
-
-/**
- * <code>ubidi_close()</code> must be called to free the memory
- * associated with a UBiDi object.<p>
- *
- * <strong>Important: </strong>
- * A parent <code>UBiDi</code> object must not be destroyed or reused if
- * it still has children.
- * If a <code>UBiDi</code> object has become the <i>child</i>
- * of another one (its <i>parent</i>) by calling
- * <code>ubidi_setLine()</code>, then the child object must
- * be destroyed (closed) or reused (by calling
- * <code>ubidi_setPara()</code> or <code>ubidi_setLine()</code>)
- * before the parent object.
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- *
- * @see ubidi_setPara
- * @see ubidi_setLine
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_close(UBiDi *pBiDi);
-
-/**
- * Modify the operation of the Bidi algorithm such that it
- * approximates an "inverse Bidi" algorithm. This function
- * must be called before <code>ubidi_setPara()</code>.
- *
- * <p>The normal operation of the Bidi algorithm as described
- * in the Unicode Technical Report is to take text stored in logical
- * (keyboard, typing) order and to determine the reordering of it for visual
- * rendering.
- * Some legacy systems store text in visual order, and for operations
- * with standard, Unicode-based algorithms, the text needs to be transformed
- * to logical order. This is effectively the inverse algorithm of the
- * described Bidi algorithm. Note that there is no standard algorithm for
- * this "inverse Bidi" and that the current implementation provides only an
- * approximation of "inverse Bidi".</p>
- *
- * <p>With <code>isInverse</code> set to <code>TRUE</code>,
- * this function changes the behavior of some of the subsequent functions
- * in a way that they can be used for the inverse Bidi algorithm.
- * Specifically, runs of text with numeric characters will be treated in a
- * special way and may need to be surrounded with LRM characters when they are
- * written in reordered sequence.</p>
- *
- * <p>Output runs should be retrieved using <code>ubidi_getVisualRun()</code>.
- * Since the actual input for "inverse Bidi" is visually ordered text and
- * <code>ubidi_getVisualRun()</code> gets the reordered runs, these are actually
- * the runs of the logically ordered output.</p>
- *
- * <p>Calling this function with argument <code>isInverse</code> set to
- * <code>TRUE</code> is equivalent to calling
- * <code>ubidi_setReorderingMode</code> with argument
- * <code>reorderingMode</code>
- * set to <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>.<br>
- * Calling this function with argument <code>isInverse</code> set to
- * <code>FALSE</code> is equivalent to calling
- * <code>ubidi_setReorderingMode</code> with argument
- * <code>reorderingMode</code>
- * set to <code>#UBIDI_REORDER_DEFAULT</code>.
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- *
- * @param isInverse specifies "forward" or "inverse" Bidi operation.
- *
- * @see ubidi_setPara
- * @see ubidi_writeReordered
- * @see ubidi_setReorderingMode
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_setInverse(UBiDi *pBiDi, UBool isInverse);
-
-/**
- * Is this Bidi object set to perform the inverse Bidi algorithm?
- * <p>Note: calling this function after setting the reordering mode with
- * <code>ubidi_setReorderingMode</code> will return <code>TRUE</code> if the
- * reordering mode was set to <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>,
- * <code>FALSE</code> for all other values.</p>
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- * @return TRUE if the Bidi object is set to perform the inverse Bidi algorithm
- * by handling numbers as L.
- *
- * @see ubidi_setInverse
- * @see ubidi_setReorderingMode
- * @stable ICU 2.0
- */
-
-U_STABLE UBool U_EXPORT2
-ubidi_isInverse(UBiDi *pBiDi);
-
-/**
- * Specify whether block separators must be allocated level zero,
- * so that successive paragraphs will progress from left to right.
- * This function must be called before <code>ubidi_setPara()</code>.
- * Paragraph separators (B) may appear in the text. Setting them to level zero
- * means that all paragraph separators (including one possibly appearing
- * in the last text position) are kept in the reordered text after the text
- * that they follow in the source text.
- * When this feature is not enabled, a paragraph separator at the last
- * position of the text before reordering will go to the first position
- * of the reordered text when the paragraph level is odd.
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- *
- * @param orderParagraphsLTR specifies whether paragraph separators (B) must
- * receive level 0, so that successive paragraphs progress from left to right.
- *
- * @see ubidi_setPara
- * @stable ICU 3.4
- */
-U_STABLE void U_EXPORT2
-ubidi_orderParagraphsLTR(UBiDi *pBiDi, UBool orderParagraphsLTR);
-
-/**
- * Is this Bidi object set to allocate level 0 to block separators so that
- * successive paragraphs progress from left to right?
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- * @return TRUE if the Bidi object is set to allocate level 0 to block
- * separators.
- *
- * @see ubidi_orderParagraphsLTR
- * @stable ICU 3.4
- */
-U_STABLE UBool U_EXPORT2
-ubidi_isOrderParagraphsLTR(UBiDi *pBiDi);
-
-/**
- * <code>UBiDiReorderingMode</code> values indicate which variant of the Bidi
- * algorithm to use.
- *
- * @see ubidi_setReorderingMode
- * @stable ICU 3.6
- */
-typedef enum UBiDiReorderingMode {
- /** Regular Logical to Visual Bidi algorithm according to Unicode.
- * This is a 0 value.
- * @stable ICU 3.6 */
- UBIDI_REORDER_DEFAULT = 0,
- /** Logical to Visual algorithm which handles numbers in a way which
- * mimicks the behavior of Windows XP.
- * @stable ICU 3.6 */
- UBIDI_REORDER_NUMBERS_SPECIAL,
- /** Logical to Visual algorithm grouping numbers with adjacent R characters
- * (reversible algorithm).
- * @stable ICU 3.6 */
- UBIDI_REORDER_GROUP_NUMBERS_WITH_R,
- /** Reorder runs only to transform a Logical LTR string to the Logical RTL
- * string with the same display, or vice-versa.<br>
- * If this mode is set together with option
- * <code>#UBIDI_OPTION_INSERT_MARKS</code>, some Bidi controls in the source
- * text may be removed and other controls may be added to produce the
- * minimum combination which has the required display.
- * @stable ICU 3.6 */
- UBIDI_REORDER_RUNS_ONLY,
- /** Visual to Logical algorithm which handles numbers like L
- * (same algorithm as selected by <code>ubidi_setInverse(TRUE)</code>.
- * @see ubidi_setInverse
- * @stable ICU 3.6 */
- UBIDI_REORDER_INVERSE_NUMBERS_AS_L,
- /** Visual to Logical algorithm equivalent to the regular Logical to Visual
- * algorithm.
- * @stable ICU 3.6 */
- UBIDI_REORDER_INVERSE_LIKE_DIRECT,
- /** Inverse Bidi (Visual to Logical) algorithm for the
- * <code>UBIDI_REORDER_NUMBERS_SPECIAL</code> Bidi algorithm.
- * @stable ICU 3.6 */
- UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL,
- /** Number of values for reordering mode.
- * @stable ICU 3.6 */
- UBIDI_REORDER_COUNT
-} UBiDiReorderingMode;
-
-/**
- * Modify the operation of the Bidi algorithm such that it implements some
- * variant to the basic Bidi algorithm or approximates an "inverse Bidi"
- * algorithm, depending on different values of the "reordering mode".
- * This function must be called before <code>ubidi_setPara()</code>, and stays
- * in effect until called again with a different argument.
- *
- * <p>The normal operation of the Bidi algorithm as described
- * in the Unicode Standard Annex #9 is to take text stored in logical
- * (keyboard, typing) order and to determine how to reorder it for visual
- * rendering.</p>
- *
- * <p>With the reordering mode set to a value other than
- * <code>#UBIDI_REORDER_DEFAULT</code>, this function changes the behavior of
- * some of the subsequent functions in a way such that they implement an
- * inverse Bidi algorithm or some other algorithm variants.</p>
- *
- * <p>Some legacy systems store text in visual order, and for operations
- * with standard, Unicode-based algorithms, the text needs to be transformed
- * into logical order. This is effectively the inverse algorithm of the
- * described Bidi algorithm. Note that there is no standard algorithm for
- * this "inverse Bidi", so a number of variants are implemented here.</p>
- *
- * <p>In other cases, it may be desirable to emulate some variant of the
- * Logical to Visual algorithm (e.g. one used in MS Windows), or perform a
- * Logical to Logical transformation.</p>
- *
- * <ul>
- * <li>When the reordering mode is set to <code>#UBIDI_REORDER_DEFAULT</code>,
- * the standard Bidi Logical to Visual algorithm is applied.</li>
- *
- * <li>When the reordering mode is set to
- * <code>#UBIDI_REORDER_NUMBERS_SPECIAL</code>,
- * the algorithm used to perform Bidi transformations when calling
- * <code>ubidi_setPara</code> should approximate the algorithm used in
- * Microsoft Windows XP rather than strictly conform to the Unicode Bidi
- * algorithm.
- * <br>
- * The differences between the basic algorithm and the algorithm addressed
- * by this option are as follows:
- * <ul>
- * <li>Within text at an even embedding level, the sequence "123AB"
- * (where AB represent R or AL letters) is transformed to "123BA" by the
- * Unicode algorithm and to "BA123" by the Windows algorithm.</li>
- * <li>Arabic-Indic numbers (AN) are handled by the Windows algorithm just
- * like regular numbers (EN).</li>
- * </ul></li>
- *
- * <li>When the reordering mode is set to
- * <code>#UBIDI_REORDER_GROUP_NUMBERS_WITH_R</code>,
- * numbers located between LTR text and RTL text are associated with the RTL
- * text. For instance, an LTR paragraph with content "abc 123 DEF" (where
- * upper case letters represent RTL characters) will be transformed to
- * "abc FED 123" (and not "abc 123 FED"), "DEF 123 abc" will be transformed
- * to "123 FED abc" and "123 FED abc" will be transformed to "DEF 123 abc".
- * This makes the algorithm reversible and makes it useful when round trip
- * (from visual to logical and back to visual) must be achieved without
- * adding LRM characters. However, this is a variation from the standard
- * Unicode Bidi algorithm.<br>
- * The source text should not contain Bidi control characters other than LRM
- * or RLM.</li>
- *
- * <li>When the reordering mode is set to
- * <code>#UBIDI_REORDER_RUNS_ONLY</code>,
- * a "Logical to Logical" transformation must be performed:
- * <ul>
- * <li>If the default text level of the source text (argument <code>paraLevel</code>
- * in <code>ubidi_setPara</code>) is even, the source text will be handled as
- * LTR logical text and will be transformed to the RTL logical text which has
- * the same LTR visual display.</li>
- * <li>If the default level of the source text is odd, the source text
- * will be handled as RTL logical text and will be transformed to the
- * LTR logical text which has the same LTR visual display.</li>
- * </ul>
- * This mode may be needed when logical text which is basically Arabic or
- * Hebrew, with possible included numbers or phrases in English, has to be
- * displayed as if it had an even embedding level (this can happen if the
- * displaying application treats all text as if it was basically LTR).
- * <br>
- * This mode may also be needed in the reverse case, when logical text which is
- * basically English, with possible included phrases in Arabic or Hebrew, has to
- * be displayed as if it had an odd embedding level.
- * <br>
- * Both cases could be handled by adding LRE or RLE at the head of the text,
- * if the display subsystem supports these formatting controls. If it does not,
- * the problem may be handled by transforming the source text in this mode
- * before displaying it, so that it will be displayed properly.<br>
- * The source text should not contain Bidi control characters other than LRM
- * or RLM.</li>
- *
- * <li>When the reordering mode is set to
- * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>, an "inverse Bidi" algorithm
- * is applied.
- * Runs of text with numeric characters will be treated like LTR letters and
- * may need to be surrounded with LRM characters when they are written in
- * reordered sequence (the option <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> can
- * be used with function <code>ubidi_writeReordered</code> to this end. This
- * mode is equivalent to calling <code>ubidi_setInverse()</code> with
- * argument <code>isInverse</code> set to <code>TRUE</code>.</li>
- *
- * <li>When the reordering mode is set to
- * <code>#UBIDI_REORDER_INVERSE_LIKE_DIRECT</code>, the "direct" Logical to Visual
- * Bidi algorithm is used as an approximation of an "inverse Bidi" algorithm.
- * This mode is similar to mode <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>
- * but is closer to the regular Bidi algorithm.
- * <br>
- * For example, an LTR paragraph with the content "FED 123 456 CBA" (where
- * upper case represents RTL characters) will be transformed to
- * "ABC 456 123 DEF", as opposed to "DEF 123 456 ABC"
- * with mode <code>UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>.<br>
- * When used in conjunction with option
- * <code>#UBIDI_OPTION_INSERT_MARKS</code>, this mode generally
- * adds Bidi marks to the output significantly more sparingly than mode
- * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code> with option
- * <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> in calls to
- * <code>ubidi_writeReordered</code>.</li>
- *
- * <li>When the reordering mode is set to
- * <code>#UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code>, the Logical to Visual
- * Bidi algorithm used in Windows XP is used as an approximation of an
- * "inverse Bidi" algorithm.
- * <br>
- * For example, an LTR paragraph with the content "abc FED123" (where
- * upper case represents RTL characters) will be transformed to
- * "abc 123DEF.</li>
- * </ul>
- *
- * <p>In all the reordering modes specifying an "inverse Bidi" algorithm
- * (i.e. those with a name starting with <code>UBIDI_REORDER_INVERSE</code>),
- * output runs should be retrieved using
- * <code>ubidi_getVisualRun()</code>, and the output text with
- * <code>ubidi_writeReordered()</code>. The caller should keep in mind that in
- * "inverse Bidi" modes the input is actually visually ordered text and
- * reordered output returned by <code>ubidi_getVisualRun()</code> or
- * <code>ubidi_writeReordered()</code> are actually runs or character string
- * of logically ordered output.<br>
- * For all the "inverse Bidi" modes, the source text should not contain
- * Bidi control characters other than LRM or RLM.</p>
- *
- * <p>Note that option <code>#UBIDI_OUTPUT_REVERSE</code> of
- * <code>ubidi_writeReordered</code> has no useful meaning and should not be
- * used in conjunction with any value of the reordering mode specifying
- * "inverse Bidi" or with value <code>UBIDI_REORDER_RUNS_ONLY</code>.
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- * @param reorderingMode specifies the required variant of the Bidi algorithm.
- *
- * @see UBiDiReorderingMode
- * @see ubidi_setInverse
- * @see ubidi_setPara
- * @see ubidi_writeReordered
- * @stable ICU 3.6
- */
-U_STABLE void U_EXPORT2
-ubidi_setReorderingMode(UBiDi *pBiDi, UBiDiReorderingMode reorderingMode);
-
-/**
- * What is the requested reordering mode for a given Bidi object?
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- * @return the current reordering mode of the Bidi object
- * @see ubidi_setReorderingMode
- * @stable ICU 3.6
- */
-U_STABLE UBiDiReorderingMode U_EXPORT2
-ubidi_getReorderingMode(UBiDi *pBiDi);
-
-/**
- * <code>UBiDiReorderingOption</code> values indicate which options are
- * specified to affect the Bidi algorithm.
- *
- * @see ubidi_setReorderingOptions
- * @stable ICU 3.6
- */
-typedef enum UBiDiReorderingOption {
- /**
- * option value for <code>ubidi_setReorderingOptions</code>:
- * disable all the options which can be set with this function
- * @see ubidi_setReorderingOptions
- * @stable ICU 3.6
- */
- UBIDI_OPTION_DEFAULT = 0,
-
- /**
- * option bit for <code>ubidi_setReorderingOptions</code>:
- * insert Bidi marks (LRM or RLM) when needed to ensure correct result of
- * a reordering to a Logical order
- *
- * <p>This option must be set or reset before calling
- * <code>ubidi_setPara</code>.</p>
- *
- * <p>This option is significant only with reordering modes which generate
- * a result with Logical order, specifically:</p>
- * <ul>
- * <li><code>#UBIDI_REORDER_RUNS_ONLY</code></li>
- * <li><code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code></li>
- * <li><code>#UBIDI_REORDER_INVERSE_LIKE_DIRECT</code></li>
- * <li><code>#UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code></li>
- * </ul>
- *
- * <p>If this option is set in conjunction with reordering mode
- * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code> or with calling
- * <code>ubidi_setInverse(TRUE)</code>, it implies
- * option <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code>
- * in calls to function <code>ubidi_writeReordered()</code>.</p>
- *
- * <p>For other reordering modes, a minimum number of LRM or RLM characters
- * will be added to the source text after reordering it so as to ensure
- * round trip, i.e. when applying the inverse reordering mode on the
- * resulting logical text with removal of Bidi marks
- * (option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> set before calling
- * <code>ubidi_setPara()</code> or option <code>#UBIDI_REMOVE_BIDI_CONTROLS</code>
- * in <code>ubidi_writeReordered</code>), the result will be identical to the
- * source text in the first transformation.
- *
- * <p>This option will be ignored if specified together with option
- * <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>. It inhibits option
- * <code>UBIDI_REMOVE_BIDI_CONTROLS</code> in calls to function
- * <code>ubidi_writeReordered()</code> and it implies option
- * <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> in calls to function
- * <code>ubidi_writeReordered()</code> if the reordering mode is
- * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>.</p>
- *
- * @see ubidi_setReorderingMode
- * @see ubidi_setReorderingOptions
- * @stable ICU 3.6
- */
- UBIDI_OPTION_INSERT_MARKS = 1,
-
- /**
- * option bit for <code>ubidi_setReorderingOptions</code>:
- * remove Bidi control characters
- *
- * <p>This option must be set or reset before calling
- * <code>ubidi_setPara</code>.</p>
- *
- * <p>This option nullifies option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
- * It inhibits option <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> in calls
- * to function <code>ubidi_writeReordered()</code> and it implies option
- * <code>#UBIDI_REMOVE_BIDI_CONTROLS</code> in calls to that function.</p>
- *
- * @see ubidi_setReorderingMode
- * @see ubidi_setReorderingOptions
- * @stable ICU 3.6
- */
- UBIDI_OPTION_REMOVE_CONTROLS = 2,
-
- /**
- * option bit for <code>ubidi_setReorderingOptions</code>:
- * process the output as part of a stream to be continued
- *
- * <p>This option must be set or reset before calling
- * <code>ubidi_setPara</code>.</p>
- *
- * <p>This option specifies that the caller is interested in processing large
- * text object in parts.
- * The results of the successive calls are expected to be concatenated by the
- * caller. Only the call for the last part will have this option bit off.</p>
- *
- * <p>When this option bit is on, <code>ubidi_setPara()</code> may process
- * less than the full source text in order to truncate the text at a meaningful
- * boundary. The caller should call <code>ubidi_getProcessedLength()</code>
- * immediately after calling <code>ubidi_setPara()</code> in order to
- * determine how much of the source text has been processed.
- * Source text beyond that length should be resubmitted in following calls to
- * <code>ubidi_setPara</code>. The processed length may be less than
- * the length of the source text if a character preceding the last character of
- * the source text constitutes a reasonable boundary (like a block separator)
- * for text to be continued.<br>
- * If the last character of the source text constitutes a reasonable
- * boundary, the whole text will be processed at once.<br>
- * If nowhere in the source text there exists
- * such a reasonable boundary, the processed length will be zero.<br>
- * The caller should check for such an occurrence and do one of the following:
- * <ul><li>submit a larger amount of text with a better chance to include
- * a reasonable boundary.</li>
- * <li>resubmit the same text after turning off option
- * <code>UBIDI_OPTION_STREAMING</code>.</li></ul>
- * In all cases, this option should be turned off before processing the last
- * part of the text.</p>
- *
- * <p>When the <code>UBIDI_OPTION_STREAMING</code> option is used,
- * it is recommended to call <code>ubidi_orderParagraphsLTR()</code> with
- * argument <code>orderParagraphsLTR</code> set to <code>TRUE</code> before
- * calling <code>ubidi_setPara</code> so that later paragraphs may be
- * concatenated to previous paragraphs on the right.</p>
- *
- * @see ubidi_setReorderingMode
- * @see ubidi_setReorderingOptions
- * @see ubidi_getProcessedLength
- * @see ubidi_orderParagraphsLTR
- * @stable ICU 3.6
- */
- UBIDI_OPTION_STREAMING = 4
-} UBiDiReorderingOption;
-
-/**
- * Specify which of the reordering options
- * should be applied during Bidi transformations.
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- * @param reorderingOptions is a combination of zero or more of the following
- * options:
- * <code>#UBIDI_OPTION_DEFAULT</code>, <code>#UBIDI_OPTION_INSERT_MARKS</code>,
- * <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>, <code>#UBIDI_OPTION_STREAMING</code>.
- *
- * @see ubidi_getReorderingOptions
- * @stable ICU 3.6
- */
-U_STABLE void U_EXPORT2
-ubidi_setReorderingOptions(UBiDi *pBiDi, uint32_t reorderingOptions);
-
-/**
- * What are the reordering options applied to a given Bidi object?
- *
- * @param pBiDi is a <code>UBiDi</code> object.
- * @return the current reordering options of the Bidi object
- * @see ubidi_setReorderingOptions
- * @stable ICU 3.6
- */
-U_STABLE uint32_t U_EXPORT2
-ubidi_getReorderingOptions(UBiDi *pBiDi);
-
-/**
- * Perform the Unicode Bidi algorithm. It is defined in the
- * <a href="http://www.unicode.org/unicode/reports/tr9/">Unicode Standard Anned #9</a>,
- * version 13,
- * also described in The Unicode Standard, Version 4.0 .<p>
- *
- * This function takes a piece of plain text containing one or more paragraphs,
- * with or without externally specified embedding levels from <i>styled</i>
- * text and computes the left-right-directionality of each character.<p>
- *
- * If the entire text is all of the same directionality, then
- * the function may not perform all the steps described by the algorithm,
- * i.e., some levels may not be the same as if all steps were performed.
- * This is not relevant for unidirectional text.<br>
- * For example, in pure LTR text with numbers the numbers would get
- * a resolved level of 2 higher than the surrounding text according to
- * the algorithm. This implementation may set all resolved levels to
- * the same value in such a case.<p>
- *
- * The text can be composed of multiple paragraphs. Occurrence of a block
- * separator in the text terminates a paragraph, and whatever comes next starts
- * a new paragraph. The exception to this rule is when a Carriage Return (CR)
- * is followed by a Line Feed (LF). Both CR and LF are block separators, but
- * in that case, the pair of characters is considered as terminating the
- * preceding paragraph, and a new paragraph will be started by a character
- * coming after the LF.
- *
- * @param pBiDi A <code>UBiDi</code> object allocated with <code>ubidi_open()</code>
- * which will be set to contain the reordering information,
- * especially the resolved levels for all the characters in <code>text</code>.
- *
- * @param text is a pointer to the text that the Bidi algorithm will be performed on.
- * This pointer is stored in the UBiDi object and can be retrieved
- * with <code>ubidi_getText()</code>.<br>
- * <strong>Note:</strong> the text must be (at least) <code>length</code> long.
- *
- * @param length is the length of the text; if <code>length==-1</code> then
- * the text must be zero-terminated.
- *
- * @param paraLevel specifies the default level for the text;
- * it is typically 0 (LTR) or 1 (RTL).
- * If the function shall determine the paragraph level from the text,
- * then <code>paraLevel</code> can be set to
- * either <code>#UBIDI_DEFAULT_LTR</code>
- * or <code>#UBIDI_DEFAULT_RTL</code>; if the text contains multiple
- * paragraphs, the paragraph level shall be determined separately for
- * each paragraph; if a paragraph does not include any strongly typed
- * character, then the desired default is used (0 for LTR or 1 for RTL).
- * Any other value between 0 and <code>#UBIDI_MAX_EXPLICIT_LEVEL</code>
- * is also valid, with odd levels indicating RTL.
- *
- * @param embeddingLevels (in) may be used to preset the embedding and override levels,
- * ignoring characters like LRE and PDF in the text.
- * A level overrides the directional property of its corresponding
- * (same index) character if the level has the
- * <code>#UBIDI_LEVEL_OVERRIDE</code> bit set.<br><br>
- * Except for that bit, it must be
- * <code>paraLevel<=embeddingLevels[]<=UBIDI_MAX_EXPLICIT_LEVEL</code>,
- * with one exception: a level of zero may be specified for a paragraph
- * separator even if <code>paraLevel>0</code> when multiple paragraphs
- * are submitted in the same call to <code>ubidi_setPara()</code>.<br><br>
- * <strong>Caution: </strong>A copy of this pointer, not of the levels,
- * will be stored in the <code>UBiDi</code> object;
- * the <code>embeddingLevels</code> array must not be
- * deallocated before the <code>UBiDi</code> structure is destroyed or reused,
- * and the <code>embeddingLevels</code>
- * should not be modified to avoid unexpected results on subsequent Bidi operations.
- * However, the <code>ubidi_setPara()</code> and
- * <code>ubidi_setLine()</code> functions may modify some or all of the levels.<br><br>
- * After the <code>UBiDi</code> object is reused or destroyed, the caller
- * must take care of the deallocation of the <code>embeddingLevels</code> array.<br><br>
- * <strong>Note:</strong> the <code>embeddingLevels</code> array must be
- * at least <code>length</code> long.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_setPara(UBiDi *pBiDi, const UChar *text, int32_t length,
- UBiDiLevel paraLevel, UBiDiLevel *embeddingLevels,
- UErrorCode *pErrorCode);
-
-/**
- * <code>ubidi_setLine()</code> sets a <code>UBiDi</code> to
- * contain the reordering information, especially the resolved levels,
- * for all the characters in a line of text. This line of text is
- * specified by referring to a <code>UBiDi</code> object representing
- * this information for a piece of text containing one or more paragraphs,
- * and by specifying a range of indexes in this text.<p>
- * In the new line object, the indexes will range from 0 to <code>limit-start-1</code>.<p>
- *
- * This is used after calling <code>ubidi_setPara()</code>
- * for a piece of text, and after line-breaking on that text.
- * It is not necessary if each paragraph is treated as a single line.<p>
- *
- * After line-breaking, rules (L1) and (L2) for the treatment of
- * trailing WS and for reordering are performed on
- * a <code>UBiDi</code> object that represents a line.<p>
- *
- * <strong>Important: </strong><code>pLineBiDi</code> shares data with
- * <code>pParaBiDi</code>.
- * You must destroy or reuse <code>pLineBiDi</code> before <code>pParaBiDi</code>.
- * In other words, you must destroy or reuse the <code>UBiDi</code> object for a line
- * before the object for its parent paragraph.<p>
- *
- * The text pointer that was stored in <code>pParaBiDi</code> is also copied,
- * and <code>start</code> is added to it so that it points to the beginning of the
- * line for this object.
- *
- * @param pParaBiDi is the parent paragraph object. It must have been set
- * by a successful call to ubidi_setPara.
- *
- * @param start is the line's first index into the text.
- *
- * @param limit is just behind the line's last index into the text
- * (its last index +1).<br>
- * It must be <code>0<=start<limit<=</code>containing paragraph limit.
- * If the specified line crosses a paragraph boundary, the function
- * will terminate with error code U_ILLEGAL_ARGUMENT_ERROR.
- *
- * @param pLineBiDi is the object that will now represent a line of the text.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @see ubidi_setPara
- * @see ubidi_getProcessedLength
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_setLine(const UBiDi *pParaBiDi,
- int32_t start, int32_t limit,
- UBiDi *pLineBiDi,
- UErrorCode *pErrorCode);
-
-/**
- * Get the directionality of the text.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @return a value of <code>UBIDI_LTR</code>, <code>UBIDI_RTL</code>
- * or <code>UBIDI_MIXED</code>
- * that indicates if the entire text
- * represented by this object is unidirectional,
- * and which direction, or if it is mixed-directional.
- *
- * @see UBiDiDirection
- * @stable ICU 2.0
- */
-U_STABLE UBiDiDirection U_EXPORT2
-ubidi_getDirection(const UBiDi *pBiDi);
-
-/**
- * Get the pointer to the text.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @return The pointer to the text that the UBiDi object was created for.
- *
- * @see ubidi_setPara
- * @see ubidi_setLine
- * @stable ICU 2.0
- */
-U_STABLE const UChar * U_EXPORT2
-ubidi_getText(const UBiDi *pBiDi);
-
-/**
- * Get the length of the text.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @return The length of the text that the UBiDi object was created for.
- * @stable ICU 2.0
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_getLength(const UBiDi *pBiDi);
-
-/**
- * Get the paragraph level of the text.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @return The paragraph level. If there are multiple paragraphs, their
- * level may vary if the required paraLevel is UBIDI_DEFAULT_LTR or
- * UBIDI_DEFAULT_RTL. In that case, the level of the first paragraph
- * is returned.
- *
- * @see UBiDiLevel
- * @see ubidi_getParagraph
- * @see ubidi_getParagraphByIndex
- * @stable ICU 2.0
- */
-U_STABLE UBiDiLevel U_EXPORT2
-ubidi_getParaLevel(const UBiDi *pBiDi);
-
-/**
- * Get the number of paragraphs.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @return The number of paragraphs.
- * @stable ICU 3.4
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_countParagraphs(UBiDi *pBiDi);
-
-/**
- * Get a paragraph, given a position within the text.
- * This function returns information about a paragraph.<br>
- * Note: if the paragraph index is known, it is more efficient to
- * retrieve the paragraph information using ubidi_getParagraphByIndex().<p>
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param charIndex is the index of a character within the text, in the
- * range <code>[0..ubidi_getProcessedLength(pBiDi)-1]</code>.
- *
- * @param pParaStart will receive the index of the first character of the
- * paragraph in the text.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @param pParaLimit will receive the limit of the paragraph.
- * The l-value that you point to here may be the
- * same expression (variable) as the one for
- * <code>charIndex</code>.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @param pParaLevel will receive the level of the paragraph.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return The index of the paragraph containing the specified position.
- *
- * @see ubidi_getProcessedLength
- * @stable ICU 3.4
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_getParagraph(const UBiDi *pBiDi, int32_t charIndex, int32_t *pParaStart,
- int32_t *pParaLimit, UBiDiLevel *pParaLevel,
- UErrorCode *pErrorCode);
-
-/**
- * Get a paragraph, given the index of this paragraph.
- *
- * This function returns information about a paragraph.<p>
- *
- * @param pBiDi is the paragraph <code>UBiDi</code> object.
- *
- * @param paraIndex is the number of the paragraph, in the
- * range <code>[0..ubidi_countParagraphs(pBiDi)-1]</code>.
- *
- * @param pParaStart will receive the index of the first character of the
- * paragraph in the text.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @param pParaLimit will receive the limit of the paragraph.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @param pParaLevel will receive the level of the paragraph.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @stable ICU 3.4
- */
-U_STABLE void U_EXPORT2
-ubidi_getParagraphByIndex(const UBiDi *pBiDi, int32_t paraIndex,
- int32_t *pParaStart, int32_t *pParaLimit,
- UBiDiLevel *pParaLevel, UErrorCode *pErrorCode);
-
-/**
- * Get the level for one character.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param charIndex the index of a character. It must be in the range
- * [0..ubidi_getProcessedLength(pBiDi)].
- *
- * @return The level for the character at charIndex (0 if charIndex is not
- * in the valid range).
- *
- * @see UBiDiLevel
- * @see ubidi_getProcessedLength
- * @stable ICU 2.0
- */
-U_STABLE UBiDiLevel U_EXPORT2
-ubidi_getLevelAt(const UBiDi *pBiDi, int32_t charIndex);
-
-/**
- * Get an array of levels for each character.<p>
- *
- * Note that this function may allocate memory under some
- * circumstances, unlike <code>ubidi_getLevelAt()</code>.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object, whose
- * text length must be strictly positive.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return The levels array for the text,
- * or <code>NULL</code> if an error occurs.
- *
- * @see UBiDiLevel
- * @see ubidi_getProcessedLength
- * @stable ICU 2.0
- */
-U_STABLE const UBiDiLevel * U_EXPORT2
-ubidi_getLevels(UBiDi *pBiDi, UErrorCode *pErrorCode);
-
-/**
- * Get a logical run.
- * This function returns information about a run and is used
- * to retrieve runs in logical order.<p>
- * This is especially useful for line-breaking on a paragraph.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param logicalPosition is a logical position within the source text.
- *
- * @param pLogicalLimit will receive the limit of the corresponding run.
- * The l-value that you point to here may be the
- * same expression (variable) as the one for
- * <code>logicalPosition</code>.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @param pLevel will receive the level of the corresponding run.
- * This pointer can be <code>NULL</code> if this
- * value is not necessary.
- *
- * @see ubidi_getProcessedLength
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_getLogicalRun(const UBiDi *pBiDi, int32_t logicalPosition,
- int32_t *pLogicalLimit, UBiDiLevel *pLevel);
-
-/**
- * Get the number of runs.
- * This function may invoke the actual reordering on the
- * <code>UBiDi</code> object, after <code>ubidi_setPara()</code>
- * may have resolved only the levels of the text. Therefore,
- * <code>ubidi_countRuns()</code> may have to allocate memory,
- * and may fail doing so.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return The number of runs.
- * @stable ICU 2.0
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_countRuns(UBiDi *pBiDi, UErrorCode *pErrorCode);
-
-/**
- * Get one run's logical start, length, and directionality,
- * which can be 0 for LTR or 1 for RTL.
- * In an RTL run, the character at the logical start is
- * visually on the right of the displayed run.
- * The length is the number of characters in the run.<p>
- * <code>ubidi_countRuns()</code> should be called
- * before the runs are retrieved.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param runIndex is the number of the run in visual order, in the
- * range <code>[0..ubidi_countRuns(pBiDi)-1]</code>.
- *
- * @param pLogicalStart is the first logical character index in the text.
- * The pointer may be <code>NULL</code> if this index is not needed.
- *
- * @param pLength is the number of characters (at least one) in the run.
- * The pointer may be <code>NULL</code> if this is not needed.
- *
- * @return the directionality of the run,
- * <code>UBIDI_LTR==0</code> or <code>UBIDI_RTL==1</code>,
- * never <code>UBIDI_MIXED</code>.
- *
- * @see ubidi_countRuns
- *
- * Example:
- * <pre>
- * \code
- * int32_t i, count=ubidi_countRuns(pBiDi),
- * logicalStart, visualIndex=0, length;
- * for(i=0; i<count; ++i) {
- * if(UBIDI_LTR==ubidi_getVisualRun(pBiDi, i, &logicalStart, &length)) {
- * do { // LTR
- * show_char(text[logicalStart++], visualIndex++);
- * } while(--length>0);
- * } else {
- * logicalStart+=length; // logicalLimit
- * do { // RTL
- * show_char(text[--logicalStart], visualIndex++);
- * } while(--length>0);
- * }
- * }
- *\endcode
- * </pre>
- *
- * Note that in right-to-left runs, code like this places
- * second surrogates before first ones (which is generally a bad idea)
- * and combining characters before base characters.
- * <p>
- * Use of <code>ubidi_writeReordered()</code>, optionally with the
- * <code>#UBIDI_KEEP_BASE_COMBINING</code> option, can be considered in order
- * to avoid these issues.
- * @stable ICU 2.0
- */
-U_STABLE UBiDiDirection U_EXPORT2
-ubidi_getVisualRun(UBiDi *pBiDi, int32_t runIndex,
- int32_t *pLogicalStart, int32_t *pLength);
-
-/**
- * Get the visual position from a logical text position.
- * If such a mapping is used many times on the same
- * <code>UBiDi</code> object, then calling
- * <code>ubidi_getLogicalMap()</code> is more efficient.<p>
- *
- * The value returned may be <code>#UBIDI_MAP_NOWHERE</code> if there is no
- * visual position because the corresponding text character is a Bidi control
- * removed from output by the option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>.
- * <p>
- * When the visual output is altered by using options of
- * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
- * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
- * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the visual position returned may not
- * be correct. It is advised to use, when possible, reordering options
- * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
- * <p>
- * Note that in right-to-left runs, this mapping places
- * second surrogates before first ones (which is generally a bad idea)
- * and combining characters before base characters.
- * Use of <code>ubidi_writeReordered()</code>, optionally with the
- * <code>#UBIDI_KEEP_BASE_COMBINING</code> option can be considered instead
- * of using the mapping, in order to avoid these issues.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param logicalIndex is the index of a character in the text.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return The visual position of this character.
- *
- * @see ubidi_getLogicalMap
- * @see ubidi_getLogicalIndex
- * @see ubidi_getProcessedLength
- * @stable ICU 2.0
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_getVisualIndex(UBiDi *pBiDi, int32_t logicalIndex, UErrorCode *pErrorCode);
-
-/**
- * Get the logical text position from a visual position.
- * If such a mapping is used many times on the same
- * <code>UBiDi</code> object, then calling
- * <code>ubidi_getVisualMap()</code> is more efficient.<p>
- *
- * The value returned may be <code>#UBIDI_MAP_NOWHERE</code> if there is no
- * logical position because the corresponding text character is a Bidi mark
- * inserted in the output by option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
- * <p>
- * This is the inverse function to <code>ubidi_getVisualIndex()</code>.
- * <p>
- * When the visual output is altered by using options of
- * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
- * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
- * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the logical position returned may not
- * be correct. It is advised to use, when possible, reordering options
- * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param visualIndex is the visual position of a character.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return The index of this character in the text.
- *
- * @see ubidi_getVisualMap
- * @see ubidi_getVisualIndex
- * @see ubidi_getResultLength
- * @stable ICU 2.0
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_getLogicalIndex(UBiDi *pBiDi, int32_t visualIndex, UErrorCode *pErrorCode);
-
-/**
- * Get a logical-to-visual index map (array) for the characters in the UBiDi
- * (paragraph or line) object.
- * <p>
- * Some values in the map may be <code>#UBIDI_MAP_NOWHERE</code> if the
- * corresponding text characters are Bidi controls removed from the visual
- * output by the option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>.
- * <p>
- * When the visual output is altered by using options of
- * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
- * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
- * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the visual positions returned may not
- * be correct. It is advised to use, when possible, reordering options
- * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
- * <p>
- * Note that in right-to-left runs, this mapping places
- * second surrogates before first ones (which is generally a bad idea)
- * and combining characters before base characters.
- * Use of <code>ubidi_writeReordered()</code>, optionally with the
- * <code>#UBIDI_KEEP_BASE_COMBINING</code> option can be considered instead
- * of using the mapping, in order to avoid these issues.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param indexMap is a pointer to an array of <code>ubidi_getProcessedLength()</code>
- * indexes which will reflect the reordering of the characters.
- * If option <code>#UBIDI_OPTION_INSERT_MARKS</code> is set, the number
- * of elements allocated in <code>indexMap</code> must be no less than
- * <code>ubidi_getResultLength()</code>.
- * The array does not need to be initialized.<br><br>
- * The index map will result in <code>indexMap[logicalIndex]==visualIndex</code>.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @see ubidi_getVisualMap
- * @see ubidi_getVisualIndex
- * @see ubidi_getProcessedLength
- * @see ubidi_getResultLength
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_getLogicalMap(UBiDi *pBiDi, int32_t *indexMap, UErrorCode *pErrorCode);
-
-/**
- * Get a visual-to-logical index map (array) for the characters in the UBiDi
- * (paragraph or line) object.
- * <p>
- * Some values in the map may be <code>#UBIDI_MAP_NOWHERE</code> if the
- * corresponding text characters are Bidi marks inserted in the visual output
- * by the option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
- * <p>
- * When the visual output is altered by using options of
- * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
- * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
- * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the logical positions returned may not
- * be correct. It is advised to use, when possible, reordering options
- * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
- *
- * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
- *
- * @param indexMap is a pointer to an array of <code>ubidi_getResultLength()</code>
- * indexes which will reflect the reordering of the characters.
- * If option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> is set, the number
- * of elements allocated in <code>indexMap</code> must be no less than
- * <code>ubidi_getProcessedLength()</code>.
- * The array does not need to be initialized.<br><br>
- * The index map will result in <code>indexMap[visualIndex]==logicalIndex</code>.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @see ubidi_getLogicalMap
- * @see ubidi_getLogicalIndex
- * @see ubidi_getProcessedLength
- * @see ubidi_getResultLength
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_getVisualMap(UBiDi *pBiDi, int32_t *indexMap, UErrorCode *pErrorCode);
-
-/**
- * This is a convenience function that does not use a UBiDi object.
- * It is intended to be used for when an application has determined the levels
- * of objects (character sequences) and just needs to have them reordered (L2).
- * This is equivalent to using <code>ubidi_getLogicalMap()</code> on a
- * <code>UBiDi</code> object.
- *
- * @param levels is an array with <code>length</code> levels that have been determined by
- * the application.
- *
- * @param length is the number of levels in the array, or, semantically,
- * the number of objects to be reordered.
- * It must be <code>length>0</code>.
- *
- * @param indexMap is a pointer to an array of <code>length</code>
- * indexes which will reflect the reordering of the characters.
- * The array does not need to be initialized.<p>
- * The index map will result in <code>indexMap[logicalIndex]==visualIndex</code>.
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_reorderLogical(const UBiDiLevel *levels, int32_t length, int32_t *indexMap);
-
-/**
- * This is a convenience function that does not use a UBiDi object.
- * It is intended to be used for when an application has determined the levels
- * of objects (character sequences) and just needs to have them reordered (L2).
- * This is equivalent to using <code>ubidi_getVisualMap()</code> on a
- * <code>UBiDi</code> object.
- *
- * @param levels is an array with <code>length</code> levels that have been determined by
- * the application.
- *
- * @param length is the number of levels in the array, or, semantically,
- * the number of objects to be reordered.
- * It must be <code>length>0</code>.
- *
- * @param indexMap is a pointer to an array of <code>length</code>
- * indexes which will reflect the reordering of the characters.
- * The array does not need to be initialized.<p>
- * The index map will result in <code>indexMap[visualIndex]==logicalIndex</code>.
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_reorderVisual(const UBiDiLevel *levels, int32_t length, int32_t *indexMap);
-
-/**
- * Invert an index map.
- * The index mapping of the first map is inverted and written to
- * the second one.
- *
- * @param srcMap is an array with <code>length</code> elements
- * which defines the original mapping from a source array containing
- * <code>length</code> elements to a destination array.
- * Some elements of the source array may have no mapping in the
- * destination array. In that case, their value will be
- * the special value <code>UBIDI_MAP_NOWHERE</code>.
- * All elements must be >=0 or equal to <code>UBIDI_MAP_NOWHERE</code>.
- * Some elements may have a value >= <code>length</code>, if the
- * destination array has more elements than the source array.
- * There must be no duplicate indexes (two or more elements with the
- * same value except <code>UBIDI_MAP_NOWHERE</code>).
- *
- * @param destMap is an array with a number of elements equal to 1 + the highest
- * value in <code>srcMap</code>.
- * <code>destMap</code> will be filled with the inverse mapping.
- * If element with index i in <code>srcMap</code> has a value k different
- * from <code>UBIDI_MAP_NOWHERE</code>, this means that element i of
- * the source array maps to element k in the destination array.
- * The inverse map will have value i in its k-th element.
- * For all elements of the destination array which do not map to
- * an element in the source array, the corresponding element in the
- * inverse map will have a value equal to <code>UBIDI_MAP_NOWHERE</code>.
- *
- * @param length is the length of each array.
- * @see UBIDI_MAP_NOWHERE
- * @stable ICU 2.0
- */
-U_STABLE void U_EXPORT2
-ubidi_invertMap(const int32_t *srcMap, int32_t *destMap, int32_t length);
-
-/** option flags for ubidi_writeReordered() */
-
-/**
- * option bit for ubidi_writeReordered():
- * keep combining characters after their base characters in RTL runs
- *
- * @see ubidi_writeReordered
- * @stable ICU 2.0
- */
-#define UBIDI_KEEP_BASE_COMBINING 1
-
-/**
- * option bit for ubidi_writeReordered():
- * replace characters with the "mirrored" property in RTL runs
- * by their mirror-image mappings
- *
- * @see ubidi_writeReordered
- * @stable ICU 2.0
- */
-#define UBIDI_DO_MIRRORING 2
-
-/**
- * option bit for ubidi_writeReordered():
- * surround the run with LRMs if necessary;
- * this is part of the approximate "inverse Bidi" algorithm
- *
- * <p>This option does not imply corresponding adjustment of the index
- * mappings.</p>
- *
- * @see ubidi_setInverse
- * @see ubidi_writeReordered
- * @stable ICU 2.0
- */
-#define UBIDI_INSERT_LRM_FOR_NUMERIC 4
-
-/**
- * option bit for ubidi_writeReordered():
- * remove Bidi control characters
- * (this does not affect #UBIDI_INSERT_LRM_FOR_NUMERIC)
- *
- * <p>This option does not imply corresponding adjustment of the index
- * mappings.</p>
- *
- * @see ubidi_writeReordered
- * @stable ICU 2.0
- */
-#define UBIDI_REMOVE_BIDI_CONTROLS 8
-
-/**
- * option bit for ubidi_writeReordered():
- * write the output in reverse order
- *
- * <p>This has the same effect as calling <code>ubidi_writeReordered()</code>
- * first without this option, and then calling
- * <code>ubidi_writeReverse()</code> without mirroring.
- * Doing this in the same step is faster and avoids a temporary buffer.
- * An example for using this option is output to a character terminal that
- * is designed for RTL scripts and stores text in reverse order.</p>
- *
- * @see ubidi_writeReordered
- * @stable ICU 2.0
- */
-#define UBIDI_OUTPUT_REVERSE 16
-
-/**
- * Get the length of the source text processed by the last call to
- * <code>ubidi_setPara()</code>. This length may be different from the length
- * of the source text if option <code>#UBIDI_OPTION_STREAMING</code>
- * has been set.
- * <br>
- * Note that whenever the length of the text affects the execution or the
- * result of a function, it is the processed length which must be considered,
- * except for <code>ubidi_setPara</code> (which receives unprocessed source
- * text) and <code>ubidi_getLength</code> (which returns the original length
- * of the source text).<br>
- * In particular, the processed length is the one to consider in the following
- * cases:
- * <ul>
- * <li>maximum value of the <code>limit</code> argument of
- * <code>ubidi_setLine</code></li>
- * <li>maximum value of the <code>charIndex</code> argument of
- * <code>ubidi_getParagraph</code></li>
- * <li>maximum value of the <code>charIndex</code> argument of
- * <code>ubidi_getLevelAt</code></li>
- * <li>number of elements in the array returned by <code>ubidi_getLevels</code></li>
- * <li>maximum value of the <code>logicalStart</code> argument of
- * <code>ubidi_getLogicalRun</code></li>
- * <li>maximum value of the <code>logicalIndex</code> argument of
- * <code>ubidi_getVisualIndex</code></li>
- * <li>number of elements filled in the <code>*indexMap</code> argument of
- * <code>ubidi_getLogicalMap</code></li>
- * <li>length of text processed by <code>ubidi_writeReordered</code></li>
- * </ul>
- *
- * @param pBiDi is the paragraph <code>UBiDi</code> object.
- *
- * @return The length of the part of the source text processed by
- * the last call to <code>ubidi_setPara</code>.
- * @see ubidi_setPara
- * @see UBIDI_OPTION_STREAMING
- * @stable ICU 3.6
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_getProcessedLength(const UBiDi *pBiDi);
-
-/**
- * Get the length of the reordered text resulting from the last call to
- * <code>ubidi_setPara()</code>. This length may be different from the length
- * of the source text if option <code>#UBIDI_OPTION_INSERT_MARKS</code>
- * or option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> has been set.
- * <br>
- * This resulting length is the one to consider in the following cases:
- * <ul>
- * <li>maximum value of the <code>visualIndex</code> argument of
- * <code>ubidi_getLogicalIndex</code></li>
- * <li>number of elements of the <code>*indexMap</code> argument of
- * <code>ubidi_getVisualMap</code></li>
- * </ul>
- * Note that this length stays identical to the source text length if
- * Bidi marks are inserted or removed using option bits of
- * <code>ubidi_writeReordered</code>, or if option
- * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code> has been set.
- *
- * @param pBiDi is the paragraph <code>UBiDi</code> object.
- *
- * @return The length of the reordered text resulting from
- * the last call to <code>ubidi_setPara</code>.
- * @see ubidi_setPara
- * @see UBIDI_OPTION_INSERT_MARKS
- * @see UBIDI_OPTION_REMOVE_CONTROLS
- * @stable ICU 3.6
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_getResultLength(const UBiDi *pBiDi);
-
-U_CDECL_BEGIN
-/**
- * value returned by <code>UBiDiClassCallback</code> callbacks when
- * there is no need to override the standard Bidi class for a given code point.
- * @see UBiDiClassCallback
- * @stable ICU 3.6
- */
-#define U_BIDI_CLASS_DEFAULT U_CHAR_DIRECTION_COUNT
-
-/**
- * Callback type declaration for overriding default Bidi class values with
- * custom ones.
- * <p>Usually, the function pointer will be propagated to a <code>UBiDi</code>
- * object by calling the <code>ubidi_setClassCallback()</code> function;
- * then the callback will be invoked by the UBA implementation any time the
- * class of a character is to be determined.</p>
- *
- * @param context is a pointer to the callback private data.
- *
- * @param c is the code point to get a Bidi class for.
- *
- * @return The directional property / Bidi class for the given code point
- * <code>c</code> if the default class has been overridden, or
- * <code>#U_BIDI_CLASS_DEFAULT</code> if the standard Bidi class value
- * for <code>c</code> is to be used.
- * @see ubidi_setClassCallback
- * @see ubidi_getClassCallback
- * @stable ICU 3.6
- */
-typedef UCharDirection U_CALLCONV
-UBiDiClassCallback(const void *context, UChar32 c);
-
-U_CDECL_END
-
-/**
- * Retrieve the Bidi class for a given code point.
- * <p>If a <code>#UBiDiClassCallback</code> callback is defined and returns a
- * value other than <code>#U_BIDI_CLASS_DEFAULT</code>, that value is used;
- * otherwise the default class determination mechanism is invoked.</p>
- *
- * @param pBiDi is the paragraph <code>UBiDi</code> object.
- *
- * @param c is the code point whose Bidi class must be retrieved.
- *
- * @return The Bidi class for character <code>c</code> based
- * on the given <code>pBiDi</code> instance.
- * @see UBiDiClassCallback
- * @stable ICU 3.6
- */
-U_STABLE UCharDirection U_EXPORT2
-ubidi_getCustomizedClass(UBiDi *pBiDi, UChar32 c);
-
-/**
- * Set the callback function and callback data used by the UBA
- * implementation for Bidi class determination.
- * <p>This may be useful for assigning Bidi classes to PUA characters, or
- * for special application needs. For instance, an application may want to
- * handle all spaces like L or R characters (according to the base direction)
- * when creating the visual ordering of logical lines which are part of a report
- * organized in columns: there should not be interaction between adjacent
- * cells.<p>
- *
- * @param pBiDi is the paragraph <code>UBiDi</code> object.
- *
- * @param newFn is the new callback function pointer.
- *
- * @param newContext is the new callback context pointer. This can be NULL.
- *
- * @param oldFn fillin: Returns the old callback function pointer. This can be
- * NULL.
- *
- * @param oldContext fillin: Returns the old callback's context. This can be
- * NULL.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @see ubidi_getClassCallback
- * @stable ICU 3.6
- */
-U_STABLE void U_EXPORT2
-ubidi_setClassCallback(UBiDi *pBiDi, UBiDiClassCallback *newFn,
- const void *newContext, UBiDiClassCallback **oldFn,
- const void **oldContext, UErrorCode *pErrorCode);
-
-/**
- * Get the current callback function used for Bidi class determination.
- *
- * @param pBiDi is the paragraph <code>UBiDi</code> object.
- *
- * @param fn fillin: Returns the callback function pointer.
- *
- * @param context fillin: Returns the callback's private context.
- *
- * @see ubidi_setClassCallback
- * @stable ICU 3.6
- */
-U_STABLE void U_EXPORT2
-ubidi_getClassCallback(UBiDi *pBiDi, UBiDiClassCallback **fn, const void **context);
-
-/**
- * Take a <code>UBiDi</code> object containing the reordering
- * information for a piece of text (one or more paragraphs) set by
- * <code>ubidi_setPara()</code> or for a line of text set by
- * <code>ubidi_setLine()</code> and write a reordered string to the
- * destination buffer.
- *
- * This function preserves the integrity of characters with multiple
- * code units and (optionally) combining characters.
- * Characters in RTL runs can be replaced by mirror-image characters
- * in the destination buffer. Note that "real" mirroring has
- * to be done in a rendering engine by glyph selection
- * and that for many "mirrored" characters there are no
- * Unicode characters as mirror-image equivalents.
- * There are also options to insert or remove Bidi control
- * characters; see the description of the <code>destSize</code>
- * and <code>options</code> parameters and of the option bit flags.
- *
- * @param pBiDi A pointer to a <code>UBiDi</code> object that
- * is set by <code>ubidi_setPara()</code> or
- * <code>ubidi_setLine()</code> and contains the reordering
- * information for the text that it was defined for,
- * as well as a pointer to that text.<br><br>
- * The text was aliased (only the pointer was stored
- * without copying the contents) and must not have been modified
- * since the <code>ubidi_setPara()</code> call.
- *
- * @param dest A pointer to where the reordered text is to be copied.
- * The source text and <code>dest[destSize]</code>
- * must not overlap.
- *
- * @param destSize The size of the <code>dest</code> buffer,
- * in number of UChars.
- * If the <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>
- * option is set, then the destination length could be
- * as large as
- * <code>ubidi_getLength(pBiDi)+2*ubidi_countRuns(pBiDi)</code>.
- * If the <code>UBIDI_REMOVE_BIDI_CONTROLS</code> option
- * is set, then the destination length may be less than
- * <code>ubidi_getLength(pBiDi)</code>.
- * If none of these options is set, then the destination length
- * will be exactly <code>ubidi_getProcessedLength(pBiDi)</code>.
- *
- * @param options A bit set of options for the reordering that control
- * how the reordered text is written.
- * The options include mirroring the characters on a code
- * point basis and inserting LRM characters, which is used
- * especially for transforming visually stored text
- * to logically stored text (although this is still an
- * imperfect implementation of an "inverse Bidi" algorithm
- * because it uses the "forward Bidi" algorithm at its core).
- * The available options are:
- * <code>#UBIDI_DO_MIRRORING</code>,
- * <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
- * <code>#UBIDI_KEEP_BASE_COMBINING</code>,
- * <code>#UBIDI_OUTPUT_REVERSE</code>,
- * <code>#UBIDI_REMOVE_BIDI_CONTROLS</code>
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return The length of the output string.
- *
- * @see ubidi_getProcessedLength
- * @stable ICU 2.0
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_writeReordered(UBiDi *pBiDi,
- UChar *dest, int32_t destSize,
- uint16_t options,
- UErrorCode *pErrorCode);
-
-/**
- * Reverse a Right-To-Left run of Unicode text.
- *
- * This function preserves the integrity of characters with multiple
- * code units and (optionally) combining characters.
- * Characters can be replaced by mirror-image characters
- * in the destination buffer. Note that "real" mirroring has
- * to be done in a rendering engine by glyph selection
- * and that for many "mirrored" characters there are no
- * Unicode characters as mirror-image equivalents.
- * There are also options to insert or remove Bidi control
- * characters.
- *
- * This function is the implementation for reversing RTL runs as part
- * of <code>ubidi_writeReordered()</code>. For detailed descriptions
- * of the parameters, see there.
- * Since no Bidi controls are inserted here, the output string length
- * will never exceed <code>srcLength</code>.
- *
- * @see ubidi_writeReordered
- *
- * @param src A pointer to the RTL run text.
- *
- * @param srcLength The length of the RTL run.
- *
- * @param dest A pointer to where the reordered text is to be copied.
- * <code>src[srcLength]</code> and <code>dest[destSize]</code>
- * must not overlap.
- *
- * @param destSize The size of the <code>dest</code> buffer,
- * in number of UChars.
- * If the <code>UBIDI_REMOVE_BIDI_CONTROLS</code> option
- * is set, then the destination length may be less than
- * <code>srcLength</code>.
- * If this option is not set, then the destination length
- * will be exactly <code>srcLength</code>.
- *
- * @param options A bit set of options for the reordering that control
- * how the reordered text is written.
- * See the <code>options</code> parameter in <code>ubidi_writeReordered()</code>.
- *
- * @param pErrorCode must be a valid pointer to an error code value.
- *
- * @return The length of the output string.
- * @stable ICU 2.0
- */
-U_STABLE int32_t U_EXPORT2
-ubidi_writeReverse(const UChar *src, int32_t srcLength,
- UChar *dest, int32_t destSize,
- uint16_t options,
- UErrorCode *pErrorCode);
-
-/*#define BIDI_SAMPLE_CODE*/
-/*@}*/
-
-#endif