You are viewing a plain text version of this content. The canonical link for it is here.
Posted to issues@ignite.apache.org by "Sergey Antonov (JIRA)" <ji...@apache.org> on 2019/01/22 12:55:00 UTC
[jira] [Updated] (IGNITE-10699) Update documentation for control.sh
[ https://issues.apache.org/jira/browse/IGNITE-10699?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Sergey Antonov updated IGNITE-10699:
------------------------------------
Description:
I renamed view parameters in control.sh utility. The changes are following:
||Was||Has been||
|--skipZeros|--skip-zeros|
|--cacheFilter|--cache-filter|
|checkFirst|--check-first|
|checkThrough|--check-through|
|limit| --limit|
|order|--order|
|servers|--servers|
|clients|--clients|
|minDuration|--min-duration|
|minSize|--min-size|
|label|--label|
|nodes|--nodes|
|xid|--xid|
|kill|--kill|
|groups|--groups|
|seq|--seq|
You could find current output command {{control.sh --cache help}}
{noformat}
Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
2018 Copyright(C) Apache Software Foundation
User: santonov
--------------------------------------------------------------------------------
The '--cache subcommand' is used to get information about and perform actions with caches. The command has the following syntax:
control.sh [[--host HOST_OR_IP], [--port PORT], [--user USER], [--password PASSWORD], [--ping-interval PING_INTERVAL], [--ping-timeout PING_TIMEOUT], [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ..., SSL_PROTOCOL_N]], [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ..., SSL_CIPHER_N]], [--ssl-key-algorithm SSL_KEY_ALGORITHM], [--keystore-type KEYSTORE_TYPE], [--keystore KEYSTORE_PATH], [--keystore-password KEYSTORE_PASSWORD], [--truststore-type TRUSTSTORE_TYPE], [--truststore TRUSTSTORE_PATH], [--truststore-password TRUSTSTORE_PASSWORD]] --cache[subcommand] <subcommand_parameters>
The subcommands that take [nodeId] as an argument ('list', 'contention' and 'validate_indexes') will be executed on the given node or on all server nodes if the option is not specified. Other commands will run on a random server node.
Subcommands:
--------------------------------------------------------------------------------
--cache list regexPattern [groups|seq] [nodeId] [--config] [--output-format multi-line]
Show information about caches, groups or sequences that match a regular expression. When executed without parameters, this subcommand prints the list of caches.
Parameters:
--config - print a all configuration parameters for each cache.
--output-format multi-line - print configuration parameters per line. This option has effect only when used with --config and without [groups|seq].
--------------------------------------------------------------------------------
--cache contention minQueueSize [nodeId] [maxPrint]
Show the keys that are point of contention for multiple transactions.
--------------------------------------------------------------------------------
--cache idle_verify [--dump] [--skip-zeros] [cache1,...,cacheN] [--cache-filter ALL|SYSTEM|PERSISTENT|NOT_PERSISTENT]
Verify counters and hash sums of primary and backup partitions for the specified caches on an idle cluster and print out the differences, if any.
--------------------------------------------------------------------------------
--cache validate_indexes [cache1,...,cacheN] [nodeId] [--check-first N|--check-through K]
Validate indexes on an idle cluster and print out the keys that are missing in the indexes.
Parameters:
--check-first N - validate only the first N keys
--check-through K - validate every Kth key
--------------------------------------------------------------------------------
--cache distribution nodeId|null [cacheName1,...,cacheNameN] [--user-attributes attrName1,...,attrNameN]
Prints the information about partition distribution.
--------------------------------------------------------------------------------
--cache reset_lost_partitions cacheName1,...,cacheNameN
Reset the state of lost partitions for the specified caches.{noformat}
And {{control.sh --help}}
{noformat}
Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
2018 Copyright(C) Apache Software Foundation
User: santonov
--------------------------------------------------------------------------------
Contol.sh is used to execute admin commands on cluster or get common cluster info. The command has the following syntax:
control.sh [--host HOST_OR_IP] [--port PORT] [--user USER] [--password PASSWORD] [--ping-interval PING_INTERVAL] [--ping-timeout PING_TIMEOUT] [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ...]] [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ...]] [--ssl-key-algorithm SSL_KEY_ALGORITHM] [--keystore-type KEYSTORE_TYPE] [--keystore KEYSTORE] [--keystore-password KEYSTORE_PASSWORD] [--truststore-type TRUSTSTORE_TYPE] [--truststore TRUSTSTORE] [--truststore-password TRUSTSTORE_PASSWORD] [command] <command_parameters>
This utility can do the following commands:
Activate cluster:
control.sh --activate
Deactivate cluster:
control.sh --deactivate [--yes]
Print current cluster state:
control.sh --state
Print cluster baseline topology:
control.sh --baseline
Add nodes into baseline topology:
control.sh --baseline add consistentId1[,consistentId2,....,consistentIdN] [--yes]
Remove nodes from baseline topology:
control.sh --baseline remove consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology:
control.sh --baseline set consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology based on version:
control.sh --baseline version topologyVersion [--yes]
List or kill transactions:
control.sh --tx [--xid XID] [--min-duration SECONDS] [--min-size SIZE] [--label PATTERN_REGEX] [servers|clients] [--nodes consistentId1[,consistentId2,....,consistentIdN]] [--limit NUMBER] [--order DURATION|SIZE|START_TIME] [kill] [--yes]
Print absolute paths of unused archived wal segments on each node:
control.sh --wal print [consistentId1,consistentId2,....,consistentIdN]
Delete unused archived wal segments on each node:
control.sh --wal delete [consistentId1,consistentId2,....,consistentIdN] [--yes]
View caches information in a cluster. For more details type:
control.sh --cache help
By default commands affecting the cluster require interactive confirmation.
Use --yes option to disable it.
Default values:
HOST_OR_IP=127.0.0.1
PORT=11211
PING_INTERVAL=5000
PING_TIMEOUT=30000
SSL_PROTOCOL=TLS
SSL_KEY_ALGORITHM=SunX509
KEYSTORE_TYPE=JKS
TRUSTSTORE_TYPE=JKS
Exit codes:
0 - successful execution.
1 - invalid arguments.
2 - connection failed.
3 - authentication failed.
4 - unexpected error.
Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
2018 Copyright(C) Apache Software Foundation
User: santonov
--------------------------------------------------------------------------------
Control.sh is used to execute admin commands on cluster or get common cluster info. The command has the following syntax:
control.sh [[--host HOST_OR_IP], [--port PORT], [--user USER], [--password PASSWORD], [--ping-interval PING_INTERVAL], [--ping-timeout PING_TIMEOUT], [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ..., SSL_PROTOCOL_N]], [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ..., SSL_CIPHER_N]], [--ssl-key-algorithm SSL_KEY_ALGORITHM], [--keystore-type KEYSTORE_TYPE], [--keystore KEYSTORE_PATH], [--keystore-password KEYSTORE_PASSWORD], [--truststore-type TRUSTSTORE_TYPE], [--truststore TRUSTSTORE_PATH], [--truststore-password TRUSTSTORE_PASSWORD]] [command] <command_parameters>
This utility can do the following commands:
Activate cluster:
control.sh --activate
Deactivate cluster:
control.sh --deactivate [--yes]
Print current cluster state:
control.sh --state
Print cluster baseline topology:
control.sh --baseline
Add nodes into baseline topology:
control.sh --baseline add consistentId1[,consistentId2,....,consistentIdN] [--yes]
Remove nodes from baseline topology:
control.sh --baseline remove consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology:
control.sh --baseline set consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology based on version:
control.sh --baseline version topologyVersion [--yes]
List or kill transactions:
control.sh --tx [--xid XID] [--min-duration SECONDS] [--min-size SIZE] [--label PATTERN_REGEX] [--servers|--clients] [--nodes consistentId1[,consistentId2,....,consistentIdN]] [--limit NUMBER] [--order DURATION|SIZE|START_TIME] [--kill] [--yes]
Print absolute paths of unused archived wal segments on each node:
control.sh --wal print [consistentId1,consistentId2,....,consistentIdN]
Delete unused archived wal segments on each node:
control.sh --wal delete [consistentId1,consistentId2,....,consistentIdN] [--yes]
View caches information in a cluster. For more details type:
control.sh --cache help
By default commands affecting the cluster require interactive confirmation.
Use --yes option to disable it.
Default values:
HOST_OR_IP=127.0.0.1
PORT=11211
PING_INTERVAL=5000
PING_TIMEOUT=30000
SSL_PROTOCOL=TLS
SSL_KEY_ALGORITHM=SunX509
KEYSTORE_TYPE=JKS
TRUSTSTORE_TYPE=JKS
Exit codes:
0 - successful execution.
1 - invalid arguments.
2 - connection failed.
3 - authentication failed.
4 - unexpected error.{noformat}
was:
I renamed view parameters in control.sh utility. The changes are following:
||Was||Has been||
|--skipZeros|--skip-zeros|
|--cacheFilter|--cache-filter|
|checkFirst|--check-first|
|checkThrough|--check-through|
|limit| --limit|
|order|--order|
|servers|--servers|
|clients|--clients|
|minDuration|--min-duration|
|minSize|--min-size|
|label|--label|
|nodes|--nodes|
|xid|--xid|
|kill|--kill|
You could find current output command {{control.sh --cache help}}
{noformat}
Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
2018 Copyright(C) Apache Software Foundation
User: santonov
--------------------------------------------------------------------------------
The '--cache subcommand' is used to get information about and perform actions with caches. The command has the following syntax:
control.sh [[--host HOST_OR_IP], [--port PORT], [--user USER], [--password PASSWORD], [--ping-interval PING_INTERVAL], [--ping-timeout PING_TIMEOUT], [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ..., SSL_PROTOCOL_N]], [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ..., SSL_CIPHER_N]], [--ssl-key-algorithm SSL_KEY_ALGORITHM], [--keystore-type KEYSTORE_TYPE], [--keystore KEYSTORE_PATH], [--keystore-password KEYSTORE_PASSWORD], [--truststore-type TRUSTSTORE_TYPE], [--truststore TRUSTSTORE_PATH], [--truststore-password TRUSTSTORE_PASSWORD]] --cache[subcommand] <subcommand_parameters>
The subcommands that take [nodeId] as an argument ('list', 'contention' and 'validate_indexes') will be executed on the given node or on all server nodes if the option is not specified. Other commands will run on a random server node.
Subcommands:
--------------------------------------------------------------------------------
--cache list regexPattern [groups|seq] [nodeId] [--config] [--output-format multi-line]
Show information about caches, groups or sequences that match a regular expression. When executed without parameters, this subcommand prints the list of caches.
Parameters:
--config - print a all configuration parameters for each cache.
--output-format multi-line - print configuration parameters per line. This option has effect only when used with --config and without [groups|seq].
--------------------------------------------------------------------------------
--cache contention minQueueSize [nodeId] [maxPrint]
Show the keys that are point of contention for multiple transactions.
--------------------------------------------------------------------------------
--cache idle_verify [--dump] [--skip-zeros] [cache1,...,cacheN] [--cache-filter ALL|SYSTEM|PERSISTENT|NOT_PERSISTENT]
Verify counters and hash sums of primary and backup partitions for the specified caches on an idle cluster and print out the differences, if any.
--------------------------------------------------------------------------------
--cache validate_indexes [cache1,...,cacheN] [nodeId] [--check-first N|--check-through K]
Validate indexes on an idle cluster and print out the keys that are missing in the indexes.
Parameters:
--check-first N - validate only the first N keys
--check-through K - validate every Kth key
--------------------------------------------------------------------------------
--cache distribution nodeId|null [cacheName1,...,cacheNameN] [--user-attributes attrName1,...,attrNameN]
Prints the information about partition distribution.
--------------------------------------------------------------------------------
--cache reset_lost_partitions cacheName1,...,cacheNameN
Reset the state of lost partitions for the specified caches.{noformat}
And {{control.sh --help}}
{noformat}
Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
2018 Copyright(C) Apache Software Foundation
User: santonov
--------------------------------------------------------------------------------
Contol.sh is used to execute admin commands on cluster or get common cluster info. The command has the following syntax:
control.sh [--host HOST_OR_IP] [--port PORT] [--user USER] [--password PASSWORD] [--ping-interval PING_INTERVAL] [--ping-timeout PING_TIMEOUT] [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ...]] [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ...]] [--ssl-key-algorithm SSL_KEY_ALGORITHM] [--keystore-type KEYSTORE_TYPE] [--keystore KEYSTORE] [--keystore-password KEYSTORE_PASSWORD] [--truststore-type TRUSTSTORE_TYPE] [--truststore TRUSTSTORE] [--truststore-password TRUSTSTORE_PASSWORD] [command] <command_parameters>
This utility can do the following commands:
Activate cluster:
control.sh --activate
Deactivate cluster:
control.sh --deactivate [--yes]
Print current cluster state:
control.sh --state
Print cluster baseline topology:
control.sh --baseline
Add nodes into baseline topology:
control.sh --baseline add consistentId1[,consistentId2,....,consistentIdN] [--yes]
Remove nodes from baseline topology:
control.sh --baseline remove consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology:
control.sh --baseline set consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology based on version:
control.sh --baseline version topologyVersion [--yes]
List or kill transactions:
control.sh --tx [--xid XID] [--min-duration SECONDS] [--min-size SIZE] [--label PATTERN_REGEX] [servers|clients] [--nodes consistentId1[,consistentId2,....,consistentIdN]] [--limit NUMBER] [--order DURATION|SIZE|START_TIME] [kill] [--yes]
Print absolute paths of unused archived wal segments on each node:
control.sh --wal print [consistentId1,consistentId2,....,consistentIdN]
Delete unused archived wal segments on each node:
control.sh --wal delete [consistentId1,consistentId2,....,consistentIdN] [--yes]
View caches information in a cluster. For more details type:
control.sh --cache help
By default commands affecting the cluster require interactive confirmation.
Use --yes option to disable it.
Default values:
HOST_OR_IP=127.0.0.1
PORT=11211
PING_INTERVAL=5000
PING_TIMEOUT=30000
SSL_PROTOCOL=TLS
SSL_KEY_ALGORITHM=SunX509
KEYSTORE_TYPE=JKS
TRUSTSTORE_TYPE=JKS
Exit codes:
0 - successful execution.
1 - invalid arguments.
2 - connection failed.
3 - authentication failed.
4 - unexpected error.
Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
2018 Copyright(C) Apache Software Foundation
User: santonov
--------------------------------------------------------------------------------
Control.sh is used to execute admin commands on cluster or get common cluster info. The command has the following syntax:
control.sh [[--host HOST_OR_IP], [--port PORT], [--user USER], [--password PASSWORD], [--ping-interval PING_INTERVAL], [--ping-timeout PING_TIMEOUT], [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ..., SSL_PROTOCOL_N]], [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ..., SSL_CIPHER_N]], [--ssl-key-algorithm SSL_KEY_ALGORITHM], [--keystore-type KEYSTORE_TYPE], [--keystore KEYSTORE_PATH], [--keystore-password KEYSTORE_PASSWORD], [--truststore-type TRUSTSTORE_TYPE], [--truststore TRUSTSTORE_PATH], [--truststore-password TRUSTSTORE_PASSWORD]] [command] <command_parameters>
This utility can do the following commands:
Activate cluster:
control.sh --activate
Deactivate cluster:
control.sh --deactivate [--yes]
Print current cluster state:
control.sh --state
Print cluster baseline topology:
control.sh --baseline
Add nodes into baseline topology:
control.sh --baseline add consistentId1[,consistentId2,....,consistentIdN] [--yes]
Remove nodes from baseline topology:
control.sh --baseline remove consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology:
control.sh --baseline set consistentId1[,consistentId2,....,consistentIdN] [--yes]
Set baseline topology based on version:
control.sh --baseline version topologyVersion [--yes]
List or kill transactions:
control.sh --tx [--xid XID] [--min-duration SECONDS] [--min-size SIZE] [--label PATTERN_REGEX] [--servers|--clients] [--nodes consistentId1[,consistentId2,....,consistentIdN]] [--limit NUMBER] [--order DURATION|SIZE|START_TIME] [--kill] [--yes]
Print absolute paths of unused archived wal segments on each node:
control.sh --wal print [consistentId1,consistentId2,....,consistentIdN]
Delete unused archived wal segments on each node:
control.sh --wal delete [consistentId1,consistentId2,....,consistentIdN] [--yes]
View caches information in a cluster. For more details type:
control.sh --cache help
By default commands affecting the cluster require interactive confirmation.
Use --yes option to disable it.
Default values:
HOST_OR_IP=127.0.0.1
PORT=11211
PING_INTERVAL=5000
PING_TIMEOUT=30000
SSL_PROTOCOL=TLS
SSL_KEY_ALGORITHM=SunX509
KEYSTORE_TYPE=JKS
TRUSTSTORE_TYPE=JKS
Exit codes:
0 - successful execution.
1 - invalid arguments.
2 - connection failed.
3 - authentication failed.
4 - unexpected error.{noformat}
> Update documentation for control.sh
> -----------------------------------
>
> Key: IGNITE-10699
> URL: https://issues.apache.org/jira/browse/IGNITE-10699
> Project: Ignite
> Issue Type: Task
> Components: documentation
> Reporter: Sergey Antonov
> Assignee: Artem Budnikov
> Priority: Major
> Fix For: 2.8
>
>
> I renamed view parameters in control.sh utility. The changes are following:
> ||Was||Has been||
> |--skipZeros|--skip-zeros|
> |--cacheFilter|--cache-filter|
> |checkFirst|--check-first|
> |checkThrough|--check-through|
> |limit| --limit|
> |order|--order|
> |servers|--servers|
> |clients|--clients|
> |minDuration|--min-duration|
> |minSize|--min-size|
> |label|--label|
> |nodes|--nodes|
> |xid|--xid|
> |kill|--kill|
> |groups|--groups|
> |seq|--seq|
>
> You could find current output command {{control.sh --cache help}}
> {noformat}
> Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
> 2018 Copyright(C) Apache Software Foundation
> User: santonov
> --------------------------------------------------------------------------------
> The '--cache subcommand' is used to get information about and perform actions with caches. The command has the following syntax:
> control.sh [[--host HOST_OR_IP], [--port PORT], [--user USER], [--password PASSWORD], [--ping-interval PING_INTERVAL], [--ping-timeout PING_TIMEOUT], [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ..., SSL_PROTOCOL_N]], [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ..., SSL_CIPHER_N]], [--ssl-key-algorithm SSL_KEY_ALGORITHM], [--keystore-type KEYSTORE_TYPE], [--keystore KEYSTORE_PATH], [--keystore-password KEYSTORE_PASSWORD], [--truststore-type TRUSTSTORE_TYPE], [--truststore TRUSTSTORE_PATH], [--truststore-password TRUSTSTORE_PASSWORD]] --cache[subcommand] <subcommand_parameters>
> The subcommands that take [nodeId] as an argument ('list', 'contention' and 'validate_indexes') will be executed on the given node or on all server nodes if the option is not specified. Other commands will run on a random server node.
> Subcommands:
> --------------------------------------------------------------------------------
> --cache list regexPattern [groups|seq] [nodeId] [--config] [--output-format multi-line]
> Show information about caches, groups or sequences that match a regular expression. When executed without parameters, this subcommand prints the list of caches.
> Parameters:
> --config - print a all configuration parameters for each cache.
> --output-format multi-line - print configuration parameters per line. This option has effect only when used with --config and without [groups|seq].
> --------------------------------------------------------------------------------
> --cache contention minQueueSize [nodeId] [maxPrint]
> Show the keys that are point of contention for multiple transactions.
> --------------------------------------------------------------------------------
> --cache idle_verify [--dump] [--skip-zeros] [cache1,...,cacheN] [--cache-filter ALL|SYSTEM|PERSISTENT|NOT_PERSISTENT]
> Verify counters and hash sums of primary and backup partitions for the specified caches on an idle cluster and print out the differences, if any.
> --------------------------------------------------------------------------------
> --cache validate_indexes [cache1,...,cacheN] [nodeId] [--check-first N|--check-through K]
> Validate indexes on an idle cluster and print out the keys that are missing in the indexes.
> Parameters:
> --check-first N - validate only the first N keys
> --check-through K - validate every Kth key
> --------------------------------------------------------------------------------
> --cache distribution nodeId|null [cacheName1,...,cacheNameN] [--user-attributes attrName1,...,attrNameN]
> Prints the information about partition distribution.
> --------------------------------------------------------------------------------
> --cache reset_lost_partitions cacheName1,...,cacheNameN
> Reset the state of lost partitions for the specified caches.{noformat}
> And {{control.sh --help}}
> {noformat}
> Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
> 2018 Copyright(C) Apache Software Foundation
> User: santonov
> --------------------------------------------------------------------------------
> Contol.sh is used to execute admin commands on cluster or get common cluster info. The command has the following syntax:
> control.sh [--host HOST_OR_IP] [--port PORT] [--user USER] [--password PASSWORD] [--ping-interval PING_INTERVAL] [--ping-timeout PING_TIMEOUT] [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ...]] [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ...]] [--ssl-key-algorithm SSL_KEY_ALGORITHM] [--keystore-type KEYSTORE_TYPE] [--keystore KEYSTORE] [--keystore-password KEYSTORE_PASSWORD] [--truststore-type TRUSTSTORE_TYPE] [--truststore TRUSTSTORE] [--truststore-password TRUSTSTORE_PASSWORD] [command] <command_parameters>
> This utility can do the following commands:
> Activate cluster:
> control.sh --activate
> Deactivate cluster:
> control.sh --deactivate [--yes]
> Print current cluster state:
> control.sh --state
> Print cluster baseline topology:
> control.sh --baseline
> Add nodes into baseline topology:
> control.sh --baseline add consistentId1[,consistentId2,....,consistentIdN] [--yes]
> Remove nodes from baseline topology:
> control.sh --baseline remove consistentId1[,consistentId2,....,consistentIdN] [--yes]
> Set baseline topology:
> control.sh --baseline set consistentId1[,consistentId2,....,consistentIdN] [--yes]
> Set baseline topology based on version:
> control.sh --baseline version topologyVersion [--yes]
> List or kill transactions:
> control.sh --tx [--xid XID] [--min-duration SECONDS] [--min-size SIZE] [--label PATTERN_REGEX] [servers|clients] [--nodes consistentId1[,consistentId2,....,consistentIdN]] [--limit NUMBER] [--order DURATION|SIZE|START_TIME] [kill] [--yes]
> Print absolute paths of unused archived wal segments on each node:
> control.sh --wal print [consistentId1,consistentId2,....,consistentIdN]
> Delete unused archived wal segments on each node:
> control.sh --wal delete [consistentId1,consistentId2,....,consistentIdN] [--yes]
> View caches information in a cluster. For more details type:
> control.sh --cache help
> By default commands affecting the cluster require interactive confirmation.
> Use --yes option to disable it.
> Default values:
> HOST_OR_IP=127.0.0.1
> PORT=11211
> PING_INTERVAL=5000
> PING_TIMEOUT=30000
> SSL_PROTOCOL=TLS
> SSL_KEY_ALGORITHM=SunX509
> KEYSTORE_TYPE=JKS
> TRUSTSTORE_TYPE=JKS
> Exit codes:
> 0 - successful execution.
> 1 - invalid arguments.
> 2 - connection failed.
> 3 - authentication failed.
> 4 - unexpected error.
> Control utility [ver. 2.7.0-SNAPSHOT#19700101-sha1:DEV]
> 2018 Copyright(C) Apache Software Foundation
> User: santonov
> --------------------------------------------------------------------------------
> Control.sh is used to execute admin commands on cluster or get common cluster info. The command has the following syntax:
> control.sh [[--host HOST_OR_IP], [--port PORT], [--user USER], [--password PASSWORD], [--ping-interval PING_INTERVAL], [--ping-timeout PING_TIMEOUT], [--ssl-protocol SSL_PROTOCOL[, SSL_PROTOCOL_2, ..., SSL_PROTOCOL_N]], [--ssl-cipher-suites SSL_CIPHER_1[, SSL_CIPHER_2, ..., SSL_CIPHER_N]], [--ssl-key-algorithm SSL_KEY_ALGORITHM], [--keystore-type KEYSTORE_TYPE], [--keystore KEYSTORE_PATH], [--keystore-password KEYSTORE_PASSWORD], [--truststore-type TRUSTSTORE_TYPE], [--truststore TRUSTSTORE_PATH], [--truststore-password TRUSTSTORE_PASSWORD]] [command] <command_parameters>
> This utility can do the following commands:
> Activate cluster:
> control.sh --activate
> Deactivate cluster:
> control.sh --deactivate [--yes]
> Print current cluster state:
> control.sh --state
> Print cluster baseline topology:
> control.sh --baseline
> Add nodes into baseline topology:
> control.sh --baseline add consistentId1[,consistentId2,....,consistentIdN] [--yes]
> Remove nodes from baseline topology:
> control.sh --baseline remove consistentId1[,consistentId2,....,consistentIdN] [--yes]
> Set baseline topology:
> control.sh --baseline set consistentId1[,consistentId2,....,consistentIdN] [--yes]
> Set baseline topology based on version:
> control.sh --baseline version topologyVersion [--yes]
> List or kill transactions:
> control.sh --tx [--xid XID] [--min-duration SECONDS] [--min-size SIZE] [--label PATTERN_REGEX] [--servers|--clients] [--nodes consistentId1[,consistentId2,....,consistentIdN]] [--limit NUMBER] [--order DURATION|SIZE|START_TIME] [--kill] [--yes]
> Print absolute paths of unused archived wal segments on each node:
> control.sh --wal print [consistentId1,consistentId2,....,consistentIdN]
> Delete unused archived wal segments on each node:
> control.sh --wal delete [consistentId1,consistentId2,....,consistentIdN] [--yes]
> View caches information in a cluster. For more details type:
> control.sh --cache help
> By default commands affecting the cluster require interactive confirmation.
> Use --yes option to disable it.
> Default values:
> HOST_OR_IP=127.0.0.1
> PORT=11211
> PING_INTERVAL=5000
> PING_TIMEOUT=30000
> SSL_PROTOCOL=TLS
> SSL_KEY_ALGORITHM=SunX509
> KEYSTORE_TYPE=JKS
> TRUSTSTORE_TYPE=JKS
> Exit codes:
> 0 - successful execution.
> 1 - invalid arguments.
> 2 - connection failed.
> 3 - authentication failed.
> 4 - unexpected error.{noformat}
--
This message was sent by Atlassian JIRA
(v7.6.3#76005)