You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@subversion.apache.org by Sander Striker <st...@apache.org> on 2001/09/06 15:58:03 UTC
[BUG] --with-ssl causes update to fail
Using svn compiled with the following options:
./configure --enable-maintainer-more --prefix=/opt/svn \
--with-apxs=/opt/httpd/bin/apxs --with-ssl=/opt/ssl
Gives me an error when I update. (I checked out without the
--with-ssl option).
striker:~/src/svn/svn$ svn update
svn_error: #21067 : <Bad URL passed to RA layer>
Unrecognized URL scheme: http://svn.collab.net/repos/svn/.
When I do a recompile and leave the --with-ssl option off,
the update works fine.
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
RE: [BUG] --with-ssl causes update to fail
Posted by Sander Striker <st...@apache.org>.
> From: Sander Striker [mailto:striker@apache.org]
> Hi,
>
> Ok, this time I tried the shared build and the
> resulting 'svn' fails.
>
> I'm using a fresh checkout of svn. With bundled
> db3. And Joes earlier patch to find out what the
> problem is.
>
> $ ./autogen.sh
> $ ./configure --prefix=/opt/svn-ssl --enable-maintainer-mode \
> --with-ssl=/opt/ssl
>
> # make install
>
> $ /opt/svn-ssl/bin/svn --version
> Subversion, version M3 (client)
> compiled Sep 8 2001, 11:57:07
>
> Copyright (C) 2000-2001 CollabNet.
> Subversion is open source software, see http://subversion.tigris.org/
>
> The following repository access (RA) modules are available:
>
>
> apr_error: #20019, src_err 0 : <DSO load failed>
> Could not load DSO `libsvn_ra_dav.so': /opt/svn-ssl/lib/libneon.so.15:
> undefined symbol: SSL_set_fd
>
>
> And thus it seems that something didn't get linked properly in
> shared build with ssl.
I'm not really familiar with neons and subversions build system internals
(yet), but it seems that neon isn't setting LIBS = -lssl in
neon/src/Makefile.
After manually adding this, recompiling and installing I now have
svn with shared libs and ssl capability :)
On to setting up the server side and do some testing ;)
I'll get back to you later.
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
RE: [BUG] --with-ssl causes update to fail
Posted by Sander Striker <st...@apache.org>.
Hi,
Ok, this time I tried the shared build and the
resulting 'svn' fails.
I'm using a fresh checkout of svn. With bundled
db3. And Joes earlier patch to find out what the
problem is.
$ ./autogen.sh
$ ./configure --prefix=/opt/svn-ssl --enable-maintainer-mode \
--with-ssl=/opt/ssl
# make install
$ /opt/svn-ssl/bin/svn --version
Subversion, version M3 (client)
compiled Sep 8 2001, 11:57:07
Copyright (C) 2000-2001 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
The following repository access (RA) modules are available:
apr_error: #20019, src_err 0 : <DSO load failed>
Could not load DSO `libsvn_ra_dav.so': /opt/svn-ssl/lib/libneon.so.15:
undefined symbol: SSL_set_fd
And thus it seems that something didn't get linked properly in
shared build with ssl.
About the earlier problem that went away when using a fresh
install directory. My bad, I should read better:
"3. Clean up any previous Subversion installs first!"
in the INSTALL file.
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
RE: [BUG] --with-ssl causes update to fail
Posted by Sander Striker <st...@apache.org>.
> From: Joe Orton [mailto:joe@manyfish.co.uk]
> Well I just tried this, using this configure line (and bundled DB3
> build, but otherwise normal)
Same here, bundled db3 build that is.
> ../configure --disable-shared --with-ssl --enable-maintainer-mode
>
> and then doing
>
> ../subversion/clients/cmdline/svn co https://localhost/
>
> works (in that it doesn't complain about unrecognized URL scheme).
Right, I think I found what the problem is. I retried it and
then decided to pick a new installation directory (one that didn't
exist before) like so:
$ ./configure --disable-shared --prefix=/opt/svn-static \
--enable-maintainer-mode --with-ssl=/opt/ssl
$ make
# make install
$ /opt/svn-static/bin/svn --version
Subversion, version M3 (client)
compiled Sep 8 2001, 11:34:54
Copyright (C) 2000-2001 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
The following repository access (RA) modules are available:
* ra_dav : handles 'http' schema
(Module for accessing a repository via WebDAV (DeltaV) protocol.)
* ra_local : handles 'file' schema
(Module for accessing a repository on local disk.)
* ra_dav : handles 'https' schema
(Module for accessing a repository via WebDAV (DeltaV) protocol.)
$ /opt/svn-static/bin/svn update [my current directory is a checked out
copy of svn]
$
Now this works, I'll go and try the shared build, after first removing
the installation directory...
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [BUG] --with-ssl causes update to fail
Posted by Joe Orton <jo...@manyfish.co.uk>.
Well I just tried this, using this configure line (and bundled DB3
build, but otherwise normal)
./configure --disable-shared --with-ssl --enable-maintainer-mode
and then doing
./subversion/clients/cmdline/svn co https://localhost/
works (in that it doesn't complain about unrecognized URL scheme).
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [BUG] --with-ssl causes update to fail
Posted by Joe Orton <jo...@manyfish.co.uk>.
On Mon, Sep 10, 2001 at 03:19:50AM -0700, Greg Stein wrote:
> On Sat, Sep 08, 2001 at 09:33:23AM +0100, Joe Orton wrote:
> >...
> > If you're not building a with-DB3 build you will have to #if 0 the
> > ra_local_init definition in ra_libraries to get a useful binary with
> > this patch.
>
> That shouldn't be true. Without DB, the SVN_LIBSVN_CLIENT_LINKS_RA_LOCAL
> symbol should not be set.
Yeah, don't worry, the current code copes with the DB/without-DB
situation properly in shared and non-shared builds. But it relies on the
fact that any errors loading the DSO are ignored, e.g. when the DSO
isn't actually there. This isn't helpful when trying to work out why a
DSO which *is* there doesn't actually load!
My patch changed that to get the error out for debugging.
(Sadly it doesn't look like we can portably distinguish between a "DSO
not present" and a "couldn't load DSO" error.)
joe
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
with-db3 issues WAS: RE: [BUG] --with-ssl causes update to fail
Posted by Sander Striker <st...@apache.org>.
> From: Greg Stein [mailto:gstein@lyra.org]
> On Sat, Sep 08, 2001 at 09:33:23AM +0100, Joe Orton wrote:
>>...
>> If you're not building a with-DB3 build you will have to #if 0 the
>> ra_local_init definition in ra_libraries to get a useful binary with
>> this patch.
>
> That shouldn't be true. Without DB, the SVN_LIBSVN_CLIENT_LINKS_RA_LOCAL
> symbol should not be set.
I wouldn't know, I use db in the subversion tree, because I couldn't
get --with-db=/path/of/my/db/install to work for me.
> Is there something more?
I have a shared svn binary with ssl working now. After doing
$ ./configure --enable-maintainer-mode --prefix=/opt/svn \
--with-apxs=/opt/httpd/bin/apxs --with-ssl=/opt/ssl
I did:
$ mv neon/Makefile neon/Makefile~
$ sed -e 's/LIBS = /LIBS = -lssl/' neon/Makefile~ >neon/Makefile
Then it works ok. Surely this needs to get fixed somewhere...
The reason it was failing before is because an SSL function couldn't
be found which was in neon.
> Cheers,
> -g
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [BUG] --with-ssl causes update to fail
Posted by Greg Stein <gs...@lyra.org>.
On Sat, Sep 08, 2001 at 09:33:23AM +0100, Joe Orton wrote:
>...
> If you're not building a with-DB3 build you will have to #if 0 the
> ra_local_init definition in ra_libraries to get a useful binary with
> this patch.
That shouldn't be true. Without DB, the SVN_LIBSVN_CLIENT_LINKS_RA_LOCAL
symbol should not be set.
Is there something more?
Cheers,
-g
--
Greg Stein, http://www.lyra.org/
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [BUG] --with-ssl causes update to fail
Posted by Joe Orton <jo...@manyfish.co.uk>.
On Sat, Sep 08, 2001 at 09:20:19AM +0100, Joe Orton wrote:
> On Sat, Sep 08, 2001 at 02:20:16AM +0200, Sander Striker wrote:
> > $ /opt/svn-ssl/bin/svn --version
> > Subversion, version M3 (client)
> > compiled Sep 7 2001, 03:05:58
> >
> > Copyright (C) 2000-2001 CollabNet.
> > Subversion is open source software, see http://subversion.tigris.org/
> >
> > The following repository access (RA) modules are available:
> >
> > * ra_dav : handles 'http' schema
> > (Module for accessing a repository via WebDAV (DeltaV) protocol.)
> > * ra_local : handles 'file' schema
> > (Module for accessing a repository on local disk.)
> > * ra_dav : handles 'https' schema
> > (Module for accessing a repository via WebDAV (DeltaV) protocol.)
>
> Hum. That looks heathly, but your debugging seems to contract this; is
> that really the same binary being traced?
(or even "healthy")
> initfunc should be initially NULL if you build shared since the modules
> aren't linked in; if it's NULL, ra_loader.c then tries to load them as
> DSOs. But silently drops the error if that fails... (usually a bad
> idea)
If you're not building a with-DB3 build you will have to #if 0 the
ra_local_init definition in ra_libraries to get a useful binary with
this patch.
joe
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [BUG] --with-ssl causes update to fail
Posted by Joe Orton <jo...@manyfish.co.uk>.
On Sat, Sep 08, 2001 at 02:20:16AM +0200, Sander Striker wrote:
> $ /opt/svn-ssl/bin/svn --version
> Subversion, version M3 (client)
> compiled Sep 7 2001, 03:05:58
>
> Copyright (C) 2000-2001 CollabNet.
> Subversion is open source software, see http://subversion.tigris.org/
>
> The following repository access (RA) modules are available:
>
> * ra_dav : handles 'http' schema
> (Module for accessing a repository via WebDAV (DeltaV) protocol.)
> * ra_local : handles 'file' schema
> (Module for accessing a repository on local disk.)
> * ra_dav : handles 'https' schema
> (Module for accessing a repository via WebDAV (DeltaV) protocol.)
Hum. That looks heathly, but your debugging seems to contract this; is
that really the same binary being traced?
initfunc should be initially NULL if you build shared since the modules
aren't linked in; if it's NULL, ra_loader.c then tries to load them as
DSOs. But silently drops the error if that fails... (usually a bad
idea)
But if it fails, I'm not how you got the output above ;) Since you only
get the output above if you managed to link or load the initfunc!
Can you try this patch?
Index: subversion/libsvn_ra/ra_loader.c
===================================================================
--- subversion/libsvn_ra/SVN/text-base/ra_loader.c Sun Sep 2 10:19:19 2001
+++ subversion/libsvn_ra/ra_loader.c Sat Sep 8 09:13:21 2001
@@ -96,13 +96,12 @@
status = apr_dso_load (&dso, libname, pool);
if (status)
{
-#if 0
char errbuf[200];
apr_dso_error(dso, errbuf, sizeof(errbuf));
-#endif
- /* Just ignore the error. Assume the library isn't present */
- return SVN_NO_ERROR;
+ return svn_error_createf(status, 0, NULL, pool,
+ "Could not load DSO `%s': %s",
+ libname, errbuf);
}
/* note: the library will be unloaded at pool cleanup */
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
RE: [BUG] --with-ssl causes update to fail
Posted by Sander Striker <st...@apache.org>.
> From: Joe Orton [mailto:joe@manyfish.co.uk]
> On Thu, Sep 06, 2001 at 05:58:03PM +0200, Sander Striker wrote:
>> Using svn compiled with the following options:
>> ./configure --enable-maintainer-more --prefix=/opt/svn \
>> --with-apxs=/opt/httpd/bin/apxs --with-ssl=/opt/ssl
>>
>> Gives me an error when I update. (I checked out without the
>> --with-ssl option).
>>
>> striker:~/src/svn/svn$ svn update
>>
>> svn_error: #21067 : <Bad URL passed to RA layer>
>> Unrecognized URL scheme: http://svn.collab.net/repos/svn/.
>
> What does "svn --version" give?
Ah, I installed over it :(. I'll try that tomorrow.
> ISTR --with-ssl had a problem when shared builds were enabled, can't
> remember what the issue was though.
The build is shared, that's for sure.
> joe
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [SVN-DEV] [PATCH]: support for configure --program-prefix/suffix option
Posted by Dominik Westner <li...@logicunited.com>.
Hi Scott,
yes, actually I have seen your patch AFTER I have submitted mine ;-)
While I did not test every target in the Makefile, I think it should
work. In the gen-make there's the Target class defined and it should be
used everywhere. If I change the tfile attribute, it should work
everywhere.
Besides whatever problem we have with case insensitiv filesystems, the
--program-prefix/suffix options should be supported anyhow (or removed
from the configure script).
Dominik
On Sonntag, September 9, 2001, at 07:51 Uhr, C. Scott Ananian wrote:
> On Sun, 9 Sep 2001, Dominik Westner wrote:
>
>> here is a little patch to support configure's --program-prefix/suffix
>> options.
>
> I believe that more changes to gen-make are needed to properly support
> these options for all the various rules. (program name is mentioned in
> clean rules and install rules as well as the make rules, for example).
>
> The patch I submitted a few days ago to support a 'pre-install' suffix
> accomplishes most of the same purposes as this patch, I think.
> --s
>
> COBRA JUDY Morwenstow Rule Psix Bejing NSA AP Qaddafi Waihopai early
> warning
> DES Mk 48 CIA domestic disruption assassinate Echelon Hawk jihad
> corporate globalization
> ( http://lesser-magoo.lcs.mit.edu/~cananian )
> --
> "These students are going to have to find out what law and order is
> all about." -- Brig. General Robert Canterbury, Noon, May 4, 1970,
> minutes before his troops shot 13 unarmed Kent State students, killing
> 4.
> --
> [http://www.cs.cmu.edu/~dst/DeCSS/Gallery/]
> #!/usr/bin/perl -w
> # 526-byte qrpff, Keith Winstein and Marc Horowitz <sipb-iap-
> dvd@mit.edu>
> # MPEG 2 PS VOB file on stdin -> descrambled output on stdout
> # arguments: title key bytes in least to most-significant order
> $_='while(read+STDIN,$_,2048){$a=29;$c=142;if((@a=unx"C*",$_)[20]&48)
> {$h=5;
> $_=unxb24,join"",@b=map{xB8,unxb8,chr($_^$a
> [--$h+84])}@ARGV;s/...$/1$&/;$d=
> unxV,xb25,$_;$b=73;$e=256|(ord$b[4])<<9|ord$b[3];$d=$d>>8^($f=($t=255)&($d
>>> 12^$d>>4^$d^$d/8))<<17,$e=$e>>8^($t&($g=($q=$e>>14&7^$e)^$q*8^$q<<6))<<9
> ,$_=(map{$_%16or$t^=$c^=($m=(11,10,116,100,11,122,20,100)[$_/16%8])&110;$t
> ^=(72,@z=(64,72,$a^=12*($_%16-2?0:$m&17)),$b^=$_%64?12:0,@z)[$_%8]}(16..271)
> )
> [$_]^(($h>>=8)+=$f+(~$g&$t))for@a[128..$#a]}print+x"C*",@a}';s/x/pack+/g;
> eval
>
Logic United GmbH
Tel: 089-12162597
PGP Key:
mailto:westner@logicunited.com?Subject=GET%20public%20pgp%20key
Re: [SVN-DEV] [PATCH]: support for configure --program-prefix/suffix
option
Posted by "C. Scott Ananian" <ca...@lesser-magoo.lcs.mit.edu>.
On Sun, 9 Sep 2001, Dominik Westner wrote:
> here is a little patch to support configure's --program-prefix/suffix
> options.
I believe that more changes to gen-make are needed to properly support
these options for all the various rules. (program name is mentioned in
clean rules and install rules as well as the make rules, for example).
The patch I submitted a few days ago to support a 'pre-install' suffix
accomplishes most of the same purposes as this patch, I think.
--s
COBRA JUDY Morwenstow Rule Psix Bejing NSA AP Qaddafi Waihopai early warning
DES Mk 48 CIA domestic disruption assassinate Echelon Hawk jihad corporate globalization
( http://lesser-magoo.lcs.mit.edu/~cananian )
--
"These students are going to have to find out what law and order is
all about." -- Brig. General Robert Canterbury, Noon, May 4, 1970,
minutes before his troops shot 13 unarmed Kent State students, killing 4.
--
[http://www.cs.cmu.edu/~dst/DeCSS/Gallery/]
#!/usr/bin/perl -w
# 526-byte qrpff, Keith Winstein and Marc Horowitz <si...@mit.edu>
# MPEG 2 PS VOB file on stdin -> descrambled output on stdout
# arguments: title key bytes in least to most-significant order
$_='while(read+STDIN,$_,2048){$a=29;$c=142;if((@a=unx"C*",$_)[20]&48){$h=5;
$_=unxb24,join"",@b=map{xB8,unxb8,chr($_^$a[--$h+84])}@ARGV;s/...$/1$&/;$d=
unxV,xb25,$_;$b=73;$e=256|(ord$b[4])<<9|ord$b[3];$d=$d>>8^($f=($t=255)&($d
>>12^$d>>4^$d^$d/8))<<17,$e=$e>>8^($t&($g=($q=$e>>14&7^$e)^$q*8^$q<<6))<<9
,$_=(map{$_%16or$t^=$c^=($m=(11,10,116,100,11,122,20,100)[$_/16%8])&110;$t
^=(72,@z=(64,72,$a^=12*($_%16-2?0:$m&17)),$b^=$_%64?12:0,@z)[$_%8]}(16..271))
[$_]^(($h>>=8)+=$f+(~$g&$t))for@a[128..$#a]}print+x"C*",@a}';s/x/pack+/g;eval
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
[PATCH]: support for configure --program-prefix/suffix option
Posted by Dominik Westner <li...@logicunited.com>.
HI all,
here is a little patch to support configure's --program-prefix/suffix
options.
I tested it on a freshly checked out version of svn (v.72). The patch
was created with svn diff.
I hope someone can integrate it into the repository.
Greetings
Dominik
----- cut here ----
Index: ./Makefile.in
===================================================================
--- ./SVN/text-base/Makefile.in Sun Sep 9 15:40:44 2001
+++ ./Makefile.in Sun Sep 9 15:41:00 2001
@@ -26,6 +26,9 @@
fs_bindir=@bindir@
includedir = @includedir@
+program_prefix = @program_prefix@
+program_suffix = @program_suffix@
+
### should search for these...
MAKEINFO = makeinfo
TEXI2DVI = texi2dvi
Index: ./configure.in
===================================================================
--- ./SVN/text-base/configure.in Sun Sep 9 15:40:47 2001
+++ ./configure.in Sun Sep 9 16:26:26 2001
@@ -198,6 +198,10 @@
dnl Process some configuration options ----------
+AC_SUBST(program_prefix)
+AC_SUBST(program_suffix)
+test "$program_prefix" = NONE && program_prefix=""
+test "$program_suffix" = NONE && program_suffix=""
AC_ARG_ENABLE(debug,
[ --enable-debug Turn on debugging and compile time
warnings],
Index: ./gen-make.py
===================================================================
--- ./SVN/text-base/gen-make.py Sun Sep 9 15:40:57 2001
+++ ./gen-make.py Sun Sep 9 15:41:00 2001
@@ -126,6 +126,7 @@
libs.append(lib)
targ_varname = string.replace(target, '-', '_')
+
ldflags = parser.get(target, 'link-flags')
add_deps = parser.get(target, 'add-deps')
objnames = string.join(map(os.path.basename, objects))
@@ -292,7 +293,7 @@
self.type = type
if type == 'exe':
- tfile = name
+ tfile = '$(program_prefix)' + name + '$(program_suffix)'
self.objext = '.o'
if not install:
install = 'bin'
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
RE: [SVN-DEV] RE: [BUG] --with-ssl causes update to fail
Posted by Sander Striker <st...@apache.org>.
> From: C. Scott Ananian [mailto:cananian@lesser-magoo.lcs.mit.edu]
> On Sat, 8 Sep 2001, Sander Striker wrote:
>
>> I tried building with --disable-shared and without it. Doesn't
>> make a difference here (I think --disable-shared is broken, it
>> seems to build shared anyway).
>
> I posted a message about this a while back. The whole
> --{dis,en}able-{shared,static} thing is horribly broken, if you compare it
> to how libtool says this should work. --enable-shared=no might work.
Nah, it was a user bug. I should have cleaned out the installation
directory. After I did that I got both shared and static builds
working with little effort. Only shared with ssl needs a minor tweak.
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [SVN-DEV] RE: [BUG] --with-ssl causes update to fail
Posted by "C. Scott Ananian" <ca...@lesser-magoo.lcs.mit.edu>.
On Sat, 8 Sep 2001, Sander Striker wrote:
> I tried building with --disable-shared and without it. Doesn't
> make a difference here (I think --disable-shared is broken, it
> seems to build shared anyway).
I posted a message about this a while back. The whole
--{dis,en}able-{shared,static} thing is horribly broken, if you compare it
to how libtool says this should work. --enable-shared=no might work.
--s
Noriega East Timor Rule Psix Secretary Bejing cryptographic arrangements
planning NRA interception Uzi Sigint milita RUCKUS Kojarena Philadelphia
( http://lesser-magoo.lcs.mit.edu/~cananian )
--
"These students are going to have to find out what law and order is
all about." -- Brig. General Robert Canterbury, Noon, May 4, 1970,
minutes before his troops shot 13 unarmed Kent State students, killing 4.
--
[http://www.cs.cmu.edu/~dst/DeCSS/Gallery/]
#!/usr/bin/perl -w
# 526-byte qrpff, Keith Winstein and Marc Horowitz <si...@mit.edu>
# MPEG 2 PS VOB file on stdin -> descrambled output on stdout
# arguments: title key bytes in least to most-significant order
$_='while(read+STDIN,$_,2048){$a=29;$c=142;if((@a=unx"C*",$_)[20]&48){$h=5;
$_=unxb24,join"",@b=map{xB8,unxb8,chr($_^$a[--$h+84])}@ARGV;s/...$/1$&/;$d=
unxV,xb25,$_;$b=73;$e=256|(ord$b[4])<<9|ord$b[3];$d=$d>>8^($f=($t=255)&($d
>>12^$d>>4^$d^$d/8))<<17,$e=$e>>8^($t&($g=($q=$e>>14&7^$e)^$q*8^$q<<6))<<9
,$_=(map{$_%16or$t^=$c^=($m=(11,10,116,100,11,122,20,100)[$_/16%8])&110;$t
^=(72,@z=(64,72,$a^=12*($_%16-2?0:$m&17)),$b^=$_%64?12:0,@z)[$_%8]}(16..271))
[$_]^(($h>>=8)+=$f+(~$g&$t))for@a[128..$#a]}print+x"C*",@a}';s/x/pack+/g;eval
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
RE: [BUG] --with-ssl causes update to fail
Posted by Sander Striker <st...@apache.org>.
> From: Joe Orton [mailto:joe@manyfish.co.uk]
> On Thu, Sep 06, 2001 at 05:58:03PM +0200, Sander Striker wrote:
> > Using svn compiled with the following options:
> > ./configure --enable-maintainer-more --prefix=/opt/svn \
> > --with-apxs=/opt/httpd/bin/apxs --with-ssl=/opt/ssl
> >
> > Gives me an error when I update. (I checked out without the
> > --with-ssl option).
> >
> > striker:~/src/svn/svn$ svn update
> >
> > svn_error: #21067 : <Bad URL passed to RA layer>
> > Unrecognized URL scheme: http://svn.collab.net/repos/svn/.
>
> What does "svn --version" give?
$ /opt/svn-ssl/bin/svn --version
Subversion, version M3 (client)
compiled Sep 7 2001, 03:05:58
Copyright (C) 2000-2001 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
The following repository access (RA) modules are available:
* ra_dav : handles 'http' schema
(Module for accessing a repository via WebDAV (DeltaV) protocol.)
* ra_local : handles 'file' schema
(Module for accessing a repository on local disk.)
* ra_dav : handles 'https' schema
(Module for accessing a repository via WebDAV (DeltaV) protocol.)
> ISTR --with-ssl had a problem when shared builds were enabled, can't
> remember what the issue was though.
I tried building with --disable-shared and without it. Doesn't
make a difference here (I think --disable-shared is broken, it
seems to build shared anyway).
When I gdb, it can be traced back to ra_dav not having an init
function, which strikes me as odd. IOW, the only match that is
trying to be performed is against 'file'.
$ gdb /opt/svn-ssl/bin/svn
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu"...
(gdb) break svn_client_update
Breakpoint 1 at 0x8049604
(gdb) run update
Starting program: /opt/svn-ssl/bin/svn update
Breakpoint 1 at 0x4001c857: file subversion/libsvn_client/update.c, line 76.
[New Thread 1024 (LWP 23547)]
[Switching to Thread 1024 (LWP 23547)]
Breakpoint 1, svn_client_update (before_editor=0x0, before_edit_baton=0x0,
after_editor=0x80520bc, after_edit_baton=0x80520b4, auth_obj=0x805204c,
path=0x805206c, xml_src=0x0, revision=-1, tm=0, pool=0x8051e64) at
subversion/libsvn_client/update.c:76
76 assert (path != NULL);
(gdb) n
77 assert (path->len > 0);
(gdb)
80 SVN_ERR (svn_wc_entry (&entry, path, pool));
(gdb)
81 if (! entry)
(gdb)
86 if (entry->existence == svn_wc_existence_deleted)
(gdb)
91 URL = svn_stringbuf_create (entry->ancestor->data, pool);
(gdb)
96 if (svn_path_is_thisdir (path, svn_path_repos_style))
(gdb)
97 svn_path_add_component (URL, path, svn_path_repos_style);
(gdb)
102 SVN_ERR (svn_wc_get_update_editor (path,
(gdb)
106 pool));
(gdb)
109 svn_delta_wrap_editor (&update_editor, &update_edit_baton,
(gdb)
115 if (! xml_src)
(gdb)
119 svn_stringbuf_t *base_dir = path;
(gdb)
122 SVN_ERR (svn_ra_init_ra_libs (&ra_baton, pool));
(gdb) s
svn_ra_init_ra_libs (ra_baton=0xbffffbc0, pool=0x8051e64) at
subversion/libsvn_ra/ra_loader.c:139
139 ra_library_hash = apr_hash_make (pool);
(gdb) n
141 for (defn = ra_libraries; defn->ra_name != NULL; ++defn)
(gdb)
143 svn_ra_init_func_t initfunc = defn->initfunc;
(gdb) p *defn
$1 = {ra_name = 0x400a2f26 "dav", initfunc = 0}
(gdb) n
145 if (initfunc == NULL)
(gdb)
148 SVN_ERR( load_ra_module (&initfunc, defn->ra_name,
pool) );
(gdb)
151 if (initfunc != NULL)
(gdb)
158 }
(gdb) q
I can't figure out why initfunc stays NULL other than the library not being
found.
But, if that is the case, why is it able to find the ra_local lib?
Suggestions
appreciated.
Sander
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org
Re: [BUG] --with-ssl causes update to fail
Posted by Joe Orton <jo...@manyfish.co.uk>.
On Thu, Sep 06, 2001 at 05:58:03PM +0200, Sander Striker wrote:
> Using svn compiled with the following options:
> ./configure --enable-maintainer-more --prefix=/opt/svn \
> --with-apxs=/opt/httpd/bin/apxs --with-ssl=/opt/ssl
>
> Gives me an error when I update. (I checked out without the
> --with-ssl option).
>
> striker:~/src/svn/svn$ svn update
>
> svn_error: #21067 : <Bad URL passed to RA layer>
> Unrecognized URL scheme: http://svn.collab.net/repos/svn/.
What does "svn --version" give?
ISTR --with-ssl had a problem when shared builds were enabled, can't
remember what the issue was though.
joe
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@subversion.tigris.org
For additional commands, e-mail: dev-help@subversion.tigris.org