You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@flex.apache.org by Piotr Zarzycki <pi...@gmail.com> on 2017/09/03 20:51:00 UTC
Re: [Flex JS] Flex SDK Installer always get stuck at "Finish uncompressing"
Hi Alex,
I get back to this and look closer into compiler code regarding point #1. I
see following comments in Configuration.java:
"The major_version is required while minor_version and revision are
optional. The minimum value is 10.0.0. If you do not specify the
minor_version or revision, then the compiler uses zeros."
In code I see that if I don't have in flex-config.xml <target-player> at
all I have exception reported by this line [1]. That is why I'm seeing this
one:
<target-player>0.0.0</target-player>
[1] https://paste.apache.org/BB2R
Thanks,
Piotr
2017-08-29 6:36 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
> Hmm. It isn't obvious to me:
>
> 1) if you only have target=JSFlex, why does the compiler care about
> target-player?
> 2) Why did -htmlTemplate option not work?
>
> Maybe the console output would tell us more, or try putting
> System.out.println calls into MXMLFlexJSPublisher.java to see why the
> template wasn’t generated.
>
> HTH,
> -Alex
>
> On 8/28/17, 3:20 PM, "piotrz" <pi...@gmail.com> wrote:
>
> >Hi Alex,
> >
> >I just did build using console. It look like there is a bug in Moonshine
> >partially.
> >
> >Build in Moonshine:
> >Basically when I run build it has failed with same error in Moonshine,
> >cause
> >every build generates custom configuration [1] which contains
> ><target-player>0.0.0</target-player> - if there is no player version in
> >frameworks/flex-config.xml (since I have commented out each line related
> >to
> >target-player).
> >
> >I will probably raise issue for Moonshine.
> >
> >Build in console:
> >Once I removed target-player from [2] build has been successful from
> >console. Unfortunately -html-template was completely omitted, so MDL
> >example
> >do not have any styles.
> >
> ><https://na01.safelinks.protection.outlook.com/?url=
> http%3A%2F%2Fapache-fl
> >ex-development.2333347.n4.nabble.com%2Ffile%2Fn64004%
> 2Fmdl_table_without_S
> >tyle.png&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> f776%7Cfa7b1b5a7b34
> >438794aed2c178decee1%7C0%7C0%7C636395556215578840&sdata=
> ZRxcO%2B%2Bn2wULt4
> >kn53d6ZZutOxqguNTjBteVF59TYrA%3D&reserved=0>
> >
> >[1]
> >https://na01.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fpaste.apa
> >che.org%2FFbUb&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> f776%7Cfa7b1b
> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
> sdata=dhOREax1nh33
> >zGhlaqo9%2B0FD8g5YLY7B0yuRGd3kVKY%3D&reserved=0
> >[2]
> >https://na01.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fpaste.apa
> >che.org%2Fl0mh&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> f776%7Cfa7b1b
> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
> sdata=w2vD2jcJMjoi
> >9LYCR7z8ppgwHqe9J40G5G2fbl6uB40%3D&reserved=0
> >
> >Thanks,
> >Piotr
> >
> >
> >
> >-----
> >Apache Flex PMC
> >piotrzarzycki21@gmail.com
> >--
> >View this message in context:
> >https://na01.safelinks.protection.outlook.com/?url=
> http%3A%2F%2Fapache-fle
> >x-development.2333347.n4.nabble.com%2FFlex-JS-Flex-SDK-
> Installer-always-ge
> >t-stuck-at-Finish-uncompressing-tp63989p64004.
> html&data=02%7C01%7C%7C284e6
> >44bff584ab1b7d708d4ee62f776%7Cfa7b1b5a7b34438794aed2c178de
> cee1%7C0%7C0%7C6
> >36395556215578840&sdata=gd1LmXTytYAQOab3zLaTzWbAufOzK6
> e%2BfPf56%2FTeCIM%3D
> >&reserved=0
> >Sent from the Apache Flex Development mailing list archive at Nabble.com.
>
>
--
Piotr Zarzycki
mobile: +48 880 859 557
skype: zarzycki10
LinkedIn: http://www.linkedin.com/piotrzarzycki
<https://pl.linkedin.com/in/piotr-zarzycki-92a53552>
Re: [Flex JS] Flex SDK Installer always get stuck at "Finish uncompressing"
Posted by Piotr Zarzycki <pi...@gmail.com>.
I'm not sure whether it is even matter what version we have in case where
we have SDK for pure JS development. For sure we cannot have specify in
"library-path" and "external-library-path" paths to player.
Piotr
2017-09-04 8:38 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
> OK. That's what I hoped. So the goal should be for the installer to set
> target-player to something like 11.1?
>
> Thanks,
> -Alex
>
> On 9/3/17, 11:19 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
>
> >Once I get back "target-player" to flex-config, but still left commented
> >out external-library-path and library-path everything has build without
> >the
> >problem.
> >
> >Piotr
> >
> >2017-09-04 2:18 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
> >
> >> OK, but if you specify a legitimate target-player but only specify
> >>JSFlex
> >> output, I'm still wondering what part of the compiler is going to
> >>verify a
> >> playerglobal.swc exists since playerglobal.swc shouldn’t be specified in
> >> any external-library-path.
> >>
> >> -Alex
> >>
> >> On 9/3/17, 1:51 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
> >>
> >> >Hi Alex,
> >> >
> >> >I get back to this and look closer into compiler code regarding point
> >>#1.
> >> >I
> >> >see following comments in Configuration.java:
> >> >
> >> >"The major_version is required while minor_version and revision are
> >> >optional. The minimum value is 10.0.0. If you do not specify the
> >> >minor_version or revision, then the compiler uses zeros."
> >> >
> >> >In code I see that if I don't have in flex-config.xml <target-player>
> >>at
> >> >all I have exception reported by this line [1]. That is why I'm seeing
> >> >this
> >> >one:
> >> >
> >> ><target-player>0.0.0</target-player>
> >> >
> >> >
> >> >[1]
> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> https%3A%2F%2Fpaste.apa
> >> >che.org%2FBB2R&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
> >> 81d6%7Cfa7b1b
> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&
> >> sdata=ifbA81a5a5vw
> >> >bE4yej1Ej4mzM4JkfTH3KtBzC95wvK8%3D&reserved=0
> >> >
> >> >Thanks,
> >> >Piotr
> >> >
> >> >
> >> >2017-08-29 6:36 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
> >> >
> >> >> Hmm. It isn't obvious to me:
> >> >>
> >> >> 1) if you only have target=JSFlex, why does the compiler care about
> >> >> target-player?
> >> >> 2) Why did -htmlTemplate option not work?
> >> >>
> >> >> Maybe the console output would tell us more, or try putting
> >> >> System.out.println calls into MXMLFlexJSPublisher.java to see why the
> >> >> template wasn’t generated.
> >> >>
> >> >> HTH,
> >> >> -Alex
> >> >>
> >> >> On 8/28/17, 3:20 PM, "piotrz" <pi...@gmail.com> wrote:
> >> >>
> >> >> >Hi Alex,
> >> >> >
> >> >> >I just did build using console. It look like there is a bug in
> >> >>Moonshine
> >> >> >partially.
> >> >> >
> >> >> >Build in Moonshine:
> >> >> >Basically when I run build it has failed with same error in
> >>Moonshine,
> >> >> >cause
> >> >> >every build generates custom configuration [1] which contains
> >> >> ><target-player>0.0.0</target-player> - if there is no player
> version
> >> in
> >> >> >frameworks/flex-config.xml (since I have commented out each line
> >> >>related
> >> >> >to
> >> >> >target-player).
> >> >> >
> >> >> >I will probably raise issue for Moonshine.
> >> >> >
> >> >> >Build in console:
> >> >> >Once I removed target-player from [2] build has been successful from
> >> >> >console. Unfortunately -html-template was completely omitted, so MDL
> >> >> >example
> >> >> >do not have any styles.
> >> >> >
> >> >> ><https://na01.safelinks.protection.outlook.com/?url=
> >> >> http%3A%2F%2Fapache-fl
> >> >> >ex-development.2333347.n4.nabble.com%2Ffile%2Fn64004%
> >> >> 2Fmdl_table_without_S
> >> >> >tyle.png&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> >> >> f776%7Cfa7b1b5a7b34
> >> >> >438794aed2c178decee1%7C0%7C0%7C636395556215578840&sdata=
> >> >> ZRxcO%2B%2Bn2wULt4
> >> >> >kn53d6ZZutOxqguNTjBteVF59TYrA%3D&reserved=0>
> >> >> >
> >> >> >[1]
> >> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> >> https%3A%2F%2Fpaste.apa
> >> >> >che.org%2FFbUb&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> >> >> f776%7Cfa7b1b
> >> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
> >> >> sdata=dhOREax1nh33
> >> >> >zGhlaqo9%2B0FD8g5YLY7B0yuRGd3kVKY%3D&reserved=0
> >> >> >[2]
> >> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> >> https%3A%2F%2Fpaste.apa
> >> >> >che.org%2Fl0mh&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> >> >> f776%7Cfa7b1b
> >> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
> >> >> sdata=w2vD2jcJMjoi
> >> >> >9LYCR7z8ppgwHqe9J40G5G2fbl6uB40%3D&reserved=0
> >> >> >
> >> >> >Thanks,
> >> >> >Piotr
> >> >> >
> >> >> >
> >> >> >
> >> >> >-----
> >> >> >Apache Flex PMC
> >> >> >piotrzarzycki21@gmail.com
> >> >> >--
> >> >> >View this message in context:
> >> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> >> http%3A%2F%2Fapache-fle
> >> >> >x-development.2333347.n4.nabble.com%2FFlex-JS-Flex-SDK-
> >> >> Installer-always-ge
> >> >> >t-stuck-at-Finish-uncompressing-tp63989p64004.
> >> >> html&data=02%7C01%7C%7C284e6
> >> >> >44bff584ab1b7d708d4ee62f776%7Cfa7b1b5a7b34438794aed2c178de
> >> >> cee1%7C0%7C0%7C6
> >> >> >36395556215578840&sdata=gd1LmXTytYAQOab3zLaTzWbAufOzK6
> >> >> e%2BfPf56%2FTeCIM%3D
> >> >> >&reserved=0
> >> >> >Sent from the Apache Flex Development mailing list archive at
> >> >>Nabble.com.
> >> >>
> >> >>
> >> >
> >> >
> >> >--
> >> >
> >> >Piotr Zarzycki
> >> >
> >> >mobile: +48 880 859 557
> >> >skype: zarzycki10
> >> >
> >> >LinkedIn:
> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> http%3A%2F%2Fwww.linked
> >> >in.com%2Fpiotrzarzycki&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
> >> 81d6%
> >> >7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&sdata=
> >> 2G5u
> >> >oQ%2F1AYn846xrab%2BaOsFvp4VCLVgXzQgOXqhicqA%3D&reserved=0
> >> ><https://na01.safelinks.protection.outlook.com/?url=
> >> https%3A%2F%2Fpl.linke
> >> >din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%
> >> 7C01%7C%7Ce185e651110c4c41e
> >> >85908d4f30d81d6%7Cfa7b1b5a7b34438794aed2c178de
> >> cee1%7C0%7C0%7C6364006867241
> >>
> >>>71224&sdata=SlLXtKNsN0w8CA3bqf6bA%2FBNjeowkDXUoBtdqb5LdxI%3D&
> reserved=0>
> >>
> >>
> >
> >
> >--
> >
> >Piotr Zarzycki
> >
> >mobile: +48 880 859 557
> >skype: zarzycki10
> >
> >LinkedIn:
> >https://na01.safelinks.protection.outlook.com/?url=
> http%3A%2F%2Fwww.linked
> >in.com%2Fpiotrzarzycki&data=02%7C01%7C%7C4952a76900924e6ffe5b08d4f35c
> fbf7%
> >7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636401028093402236&sdata=
> cbBf
> >dmGkGyGRPiryqPo%2Bcdo0Xp3GsPJ8lBSxZ1CtAgc%3D&reserved=0
> ><https://na01.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fpl.linke
> >din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%
> 7C01%7C%7C4952a76900924e6ff
> >e5b08d4f35cfbf7%7Cfa7b1b5a7b34438794aed2c178de
> cee1%7C0%7C0%7C6364010280934
> >02236&sdata=g%2B5pTwRB3zQ9sC1Cbj2bYPR0%2Bd9nLBD0ZjN5ZWTwYJs%3D&
> reserved=0>
>
>
--
Piotr Zarzycki
mobile: +48 880 859 557
skype: zarzycki10
LinkedIn: http://www.linkedin.com/piotrzarzycki
<https://pl.linkedin.com/in/piotr-zarzycki-92a53552>
Re: [Flex JS] Flex SDK Installer always get stuck at "Finish
uncompressing"
Posted by Alex Harui <ah...@adobe.com.INVALID>.
OK. That's what I hoped. So the goal should be for the installer to set
target-player to something like 11.1?
Thanks,
-Alex
On 9/3/17, 11:19 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
>Once I get back "target-player" to flex-config, but still left commented
>out external-library-path and library-path everything has build without
>the
>problem.
>
>Piotr
>
>2017-09-04 2:18 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
>
>> OK, but if you specify a legitimate target-player but only specify
>>JSFlex
>> output, I'm still wondering what part of the compiler is going to
>>verify a
>> playerglobal.swc exists since playerglobal.swc shouldn’t be specified in
>> any external-library-path.
>>
>> -Alex
>>
>> On 9/3/17, 1:51 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
>>
>> >Hi Alex,
>> >
>> >I get back to this and look closer into compiler code regarding point
>>#1.
>> >I
>> >see following comments in Configuration.java:
>> >
>> >"The major_version is required while minor_version and revision are
>> >optional. The minimum value is 10.0.0. If you do not specify the
>> >minor_version or revision, then the compiler uses zeros."
>> >
>> >In code I see that if I don't have in flex-config.xml <target-player>
>>at
>> >all I have exception reported by this line [1]. That is why I'm seeing
>> >this
>> >one:
>> >
>> ><target-player>0.0.0</target-player>
>> >
>> >
>> >[1]
>> >https://na01.safelinks.protection.outlook.com/?url=
>> https%3A%2F%2Fpaste.apa
>> >che.org%2FBB2R&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
>> 81d6%7Cfa7b1b
>> >5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&
>> sdata=ifbA81a5a5vw
>> >bE4yej1Ej4mzM4JkfTH3KtBzC95wvK8%3D&reserved=0
>> >
>> >Thanks,
>> >Piotr
>> >
>> >
>> >2017-08-29 6:36 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
>> >
>> >> Hmm. It isn't obvious to me:
>> >>
>> >> 1) if you only have target=JSFlex, why does the compiler care about
>> >> target-player?
>> >> 2) Why did -htmlTemplate option not work?
>> >>
>> >> Maybe the console output would tell us more, or try putting
>> >> System.out.println calls into MXMLFlexJSPublisher.java to see why the
>> >> template wasn’t generated.
>> >>
>> >> HTH,
>> >> -Alex
>> >>
>> >> On 8/28/17, 3:20 PM, "piotrz" <pi...@gmail.com> wrote:
>> >>
>> >> >Hi Alex,
>> >> >
>> >> >I just did build using console. It look like there is a bug in
>> >>Moonshine
>> >> >partially.
>> >> >
>> >> >Build in Moonshine:
>> >> >Basically when I run build it has failed with same error in
>>Moonshine,
>> >> >cause
>> >> >every build generates custom configuration [1] which contains
>> >> ><target-player>0.0.0</target-player> - if there is no player version
>> in
>> >> >frameworks/flex-config.xml (since I have commented out each line
>> >>related
>> >> >to
>> >> >target-player).
>> >> >
>> >> >I will probably raise issue for Moonshine.
>> >> >
>> >> >Build in console:
>> >> >Once I removed target-player from [2] build has been successful from
>> >> >console. Unfortunately -html-template was completely omitted, so MDL
>> >> >example
>> >> >do not have any styles.
>> >> >
>> >> ><https://na01.safelinks.protection.outlook.com/?url=
>> >> http%3A%2F%2Fapache-fl
>> >> >ex-development.2333347.n4.nabble.com%2Ffile%2Fn64004%
>> >> 2Fmdl_table_without_S
>> >> >tyle.png&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> >> f776%7Cfa7b1b5a7b34
>> >> >438794aed2c178decee1%7C0%7C0%7C636395556215578840&sdata=
>> >> ZRxcO%2B%2Bn2wULt4
>> >> >kn53d6ZZutOxqguNTjBteVF59TYrA%3D&reserved=0>
>> >> >
>> >> >[1]
>> >> >https://na01.safelinks.protection.outlook.com/?url=
>> >> https%3A%2F%2Fpaste.apa
>> >> >che.org%2FFbUb&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> >> f776%7Cfa7b1b
>> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
>> >> sdata=dhOREax1nh33
>> >> >zGhlaqo9%2B0FD8g5YLY7B0yuRGd3kVKY%3D&reserved=0
>> >> >[2]
>> >> >https://na01.safelinks.protection.outlook.com/?url=
>> >> https%3A%2F%2Fpaste.apa
>> >> >che.org%2Fl0mh&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> >> f776%7Cfa7b1b
>> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
>> >> sdata=w2vD2jcJMjoi
>> >> >9LYCR7z8ppgwHqe9J40G5G2fbl6uB40%3D&reserved=0
>> >> >
>> >> >Thanks,
>> >> >Piotr
>> >> >
>> >> >
>> >> >
>> >> >-----
>> >> >Apache Flex PMC
>> >> >piotrzarzycki21@gmail.com
>> >> >--
>> >> >View this message in context:
>> >> >https://na01.safelinks.protection.outlook.com/?url=
>> >> http%3A%2F%2Fapache-fle
>> >> >x-development.2333347.n4.nabble.com%2FFlex-JS-Flex-SDK-
>> >> Installer-always-ge
>> >> >t-stuck-at-Finish-uncompressing-tp63989p64004.
>> >> html&data=02%7C01%7C%7C284e6
>> >> >44bff584ab1b7d708d4ee62f776%7Cfa7b1b5a7b34438794aed2c178de
>> >> cee1%7C0%7C0%7C6
>> >> >36395556215578840&sdata=gd1LmXTytYAQOab3zLaTzWbAufOzK6
>> >> e%2BfPf56%2FTeCIM%3D
>> >> >&reserved=0
>> >> >Sent from the Apache Flex Development mailing list archive at
>> >>Nabble.com.
>> >>
>> >>
>> >
>> >
>> >--
>> >
>> >Piotr Zarzycki
>> >
>> >mobile: +48 880 859 557
>> >skype: zarzycki10
>> >
>> >LinkedIn:
>> >https://na01.safelinks.protection.outlook.com/?url=
>> http%3A%2F%2Fwww.linked
>> >in.com%2Fpiotrzarzycki&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
>> 81d6%
>> >7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&sdata=
>> 2G5u
>> >oQ%2F1AYn846xrab%2BaOsFvp4VCLVgXzQgOXqhicqA%3D&reserved=0
>> ><https://na01.safelinks.protection.outlook.com/?url=
>> https%3A%2F%2Fpl.linke
>> >din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%
>> 7C01%7C%7Ce185e651110c4c41e
>> >85908d4f30d81d6%7Cfa7b1b5a7b34438794aed2c178de
>> cee1%7C0%7C0%7C6364006867241
>>
>>>71224&sdata=SlLXtKNsN0w8CA3bqf6bA%2FBNjeowkDXUoBtdqb5LdxI%3D&reserved=0>
>>
>>
>
>
>--
>
>Piotr Zarzycki
>
>mobile: +48 880 859 557
>skype: zarzycki10
>
>LinkedIn:
>https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.linked
>in.com%2Fpiotrzarzycki&data=02%7C01%7C%7C4952a76900924e6ffe5b08d4f35cfbf7%
>7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636401028093402236&sdata=cbBf
>dmGkGyGRPiryqPo%2Bcdo0Xp3GsPJ8lBSxZ1CtAgc%3D&reserved=0
><https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpl.linke
>din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%7C01%7C%7C4952a76900924e6ff
>e5b08d4f35cfbf7%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C6364010280934
>02236&sdata=g%2B5pTwRB3zQ9sC1Cbj2bYPR0%2Bd9nLBD0ZjN5ZWTwYJs%3D&reserved=0>
Re: [Flex JS] Flex SDK Installer always get stuck at "Finish
uncompressing"
Posted by Alex Harui <ah...@adobe.com.INVALID>.
OK. That's what I hoped. So the goal should be for the installer to set
target-player to something like 11.1?
Thanks,
-Alex
On 9/3/17, 11:19 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
>Once I get back "target-player" to flex-config, but still left commented
>out external-library-path and library-path everything has build without
>the
>problem.
>
>Piotr
>
>2017-09-04 2:18 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
>
>> OK, but if you specify a legitimate target-player but only specify
>>JSFlex
>> output, I'm still wondering what part of the compiler is going to
>>verify a
>> playerglobal.swc exists since playerglobal.swc shouldn’t be specified in
>> any external-library-path.
>>
>> -Alex
>>
>> On 9/3/17, 1:51 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
>>
>> >Hi Alex,
>> >
>> >I get back to this and look closer into compiler code regarding point
>>#1.
>> >I
>> >see following comments in Configuration.java:
>> >
>> >"The major_version is required while minor_version and revision are
>> >optional. The minimum value is 10.0.0. If you do not specify the
>> >minor_version or revision, then the compiler uses zeros."
>> >
>> >In code I see that if I don't have in flex-config.xml <target-player>
>>at
>> >all I have exception reported by this line [1]. That is why I'm seeing
>> >this
>> >one:
>> >
>> ><target-player>0.0.0</target-player>
>> >
>> >
>> >[1]
>> >https://na01.safelinks.protection.outlook.com/?url=
>> https%3A%2F%2Fpaste.apa
>> >che.org%2FBB2R&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
>> 81d6%7Cfa7b1b
>> >5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&
>> sdata=ifbA81a5a5vw
>> >bE4yej1Ej4mzM4JkfTH3KtBzC95wvK8%3D&reserved=0
>> >
>> >Thanks,
>> >Piotr
>> >
>> >
>> >2017-08-29 6:36 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
>> >
>> >> Hmm. It isn't obvious to me:
>> >>
>> >> 1) if you only have target=JSFlex, why does the compiler care about
>> >> target-player?
>> >> 2) Why did -htmlTemplate option not work?
>> >>
>> >> Maybe the console output would tell us more, or try putting
>> >> System.out.println calls into MXMLFlexJSPublisher.java to see why the
>> >> template wasn’t generated.
>> >>
>> >> HTH,
>> >> -Alex
>> >>
>> >> On 8/28/17, 3:20 PM, "piotrz" <pi...@gmail.com> wrote:
>> >>
>> >> >Hi Alex,
>> >> >
>> >> >I just did build using console. It look like there is a bug in
>> >>Moonshine
>> >> >partially.
>> >> >
>> >> >Build in Moonshine:
>> >> >Basically when I run build it has failed with same error in
>>Moonshine,
>> >> >cause
>> >> >every build generates custom configuration [1] which contains
>> >> ><target-player>0.0.0</target-player> - if there is no player version
>> in
>> >> >frameworks/flex-config.xml (since I have commented out each line
>> >>related
>> >> >to
>> >> >target-player).
>> >> >
>> >> >I will probably raise issue for Moonshine.
>> >> >
>> >> >Build in console:
>> >> >Once I removed target-player from [2] build has been successful from
>> >> >console. Unfortunately -html-template was completely omitted, so MDL
>> >> >example
>> >> >do not have any styles.
>> >> >
>> >> ><https://na01.safelinks.protection.outlook.com/?url=
>> >> http%3A%2F%2Fapache-fl
>> >> >ex-development.2333347.n4.nabble.com%2Ffile%2Fn64004%
>> >> 2Fmdl_table_without_S
>> >> >tyle.png&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> >> f776%7Cfa7b1b5a7b34
>> >> >438794aed2c178decee1%7C0%7C0%7C636395556215578840&sdata=
>> >> ZRxcO%2B%2Bn2wULt4
>> >> >kn53d6ZZutOxqguNTjBteVF59TYrA%3D&reserved=0>
>> >> >
>> >> >[1]
>> >> >https://na01.safelinks.protection.outlook.com/?url=
>> >> https%3A%2F%2Fpaste.apa
>> >> >che.org%2FFbUb&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> >> f776%7Cfa7b1b
>> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
>> >> sdata=dhOREax1nh33
>> >> >zGhlaqo9%2B0FD8g5YLY7B0yuRGd3kVKY%3D&reserved=0
>> >> >[2]
>> >> >https://na01.safelinks.protection.outlook.com/?url=
>> >> https%3A%2F%2Fpaste.apa
>> >> >che.org%2Fl0mh&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> >> f776%7Cfa7b1b
>> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
>> >> sdata=w2vD2jcJMjoi
>> >> >9LYCR7z8ppgwHqe9J40G5G2fbl6uB40%3D&reserved=0
>> >> >
>> >> >Thanks,
>> >> >Piotr
>> >> >
>> >> >
>> >> >
>> >> >-----
>> >> >Apache Flex PMC
>> >> >piotrzarzycki21@gmail.com
>> >> >--
>> >> >View this message in context:
>> >> >https://na01.safelinks.protection.outlook.com/?url=
>> >> http%3A%2F%2Fapache-fle
>> >> >x-development.2333347.n4.nabble.com%2FFlex-JS-Flex-SDK-
>> >> Installer-always-ge
>> >> >t-stuck-at-Finish-uncompressing-tp63989p64004.
>> >> html&data=02%7C01%7C%7C284e6
>> >> >44bff584ab1b7d708d4ee62f776%7Cfa7b1b5a7b34438794aed2c178de
>> >> cee1%7C0%7C0%7C6
>> >> >36395556215578840&sdata=gd1LmXTytYAQOab3zLaTzWbAufOzK6
>> >> e%2BfPf56%2FTeCIM%3D
>> >> >&reserved=0
>> >> >Sent from the Apache Flex Development mailing list archive at
>> >>Nabble.com.
>> >>
>> >>
>> >
>> >
>> >--
>> >
>> >Piotr Zarzycki
>> >
>> >mobile: +48 880 859 557
>> >skype: zarzycki10
>> >
>> >LinkedIn:
>> >https://na01.safelinks.protection.outlook.com/?url=
>> http%3A%2F%2Fwww.linked
>> >in.com%2Fpiotrzarzycki&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
>> 81d6%
>> >7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&sdata=
>> 2G5u
>> >oQ%2F1AYn846xrab%2BaOsFvp4VCLVgXzQgOXqhicqA%3D&reserved=0
>> ><https://na01.safelinks.protection.outlook.com/?url=
>> https%3A%2F%2Fpl.linke
>> >din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%
>> 7C01%7C%7Ce185e651110c4c41e
>> >85908d4f30d81d6%7Cfa7b1b5a7b34438794aed2c178de
>> cee1%7C0%7C0%7C6364006867241
>>
>>>71224&sdata=SlLXtKNsN0w8CA3bqf6bA%2FBNjeowkDXUoBtdqb5LdxI%3D&reserved=0>
>>
>>
>
>
>--
>
>Piotr Zarzycki
>
>mobile: +48 880 859 557
>skype: zarzycki10
>
>LinkedIn:
>https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.linked
>in.com%2Fpiotrzarzycki&data=02%7C01%7C%7C4952a76900924e6ffe5b08d4f35cfbf7%
>7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636401028093402236&sdata=cbBf
>dmGkGyGRPiryqPo%2Bcdo0Xp3GsPJ8lBSxZ1CtAgc%3D&reserved=0
><https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpl.linke
>din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%7C01%7C%7C4952a76900924e6ff
>e5b08d4f35cfbf7%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C6364010280934
>02236&sdata=g%2B5pTwRB3zQ9sC1Cbj2bYPR0%2Bd9nLBD0ZjN5ZWTwYJs%3D&reserved=0>
Re: [Flex JS] Flex SDK Installer always get stuck at "Finish uncompressing"
Posted by Piotr Zarzycki <pi...@gmail.com>.
Once I get back "target-player" to flex-config, but still left commented
out external-library-path and library-path everything has build without the
problem.
Piotr
2017-09-04 2:18 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
> OK, but if you specify a legitimate target-player but only specify JSFlex
> output, I'm still wondering what part of the compiler is going to verify a
> playerglobal.swc exists since playerglobal.swc shouldn’t be specified in
> any external-library-path.
>
> -Alex
>
> On 9/3/17, 1:51 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
>
> >Hi Alex,
> >
> >I get back to this and look closer into compiler code regarding point #1.
> >I
> >see following comments in Configuration.java:
> >
> >"The major_version is required while minor_version and revision are
> >optional. The minimum value is 10.0.0. If you do not specify the
> >minor_version or revision, then the compiler uses zeros."
> >
> >In code I see that if I don't have in flex-config.xml <target-player> at
> >all I have exception reported by this line [1]. That is why I'm seeing
> >this
> >one:
> >
> ><target-player>0.0.0</target-player>
> >
> >
> >[1]
> >https://na01.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fpaste.apa
> >che.org%2FBB2R&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
> 81d6%7Cfa7b1b
> >5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&
> sdata=ifbA81a5a5vw
> >bE4yej1Ej4mzM4JkfTH3KtBzC95wvK8%3D&reserved=0
> >
> >Thanks,
> >Piotr
> >
> >
> >2017-08-29 6:36 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
> >
> >> Hmm. It isn't obvious to me:
> >>
> >> 1) if you only have target=JSFlex, why does the compiler care about
> >> target-player?
> >> 2) Why did -htmlTemplate option not work?
> >>
> >> Maybe the console output would tell us more, or try putting
> >> System.out.println calls into MXMLFlexJSPublisher.java to see why the
> >> template wasn’t generated.
> >>
> >> HTH,
> >> -Alex
> >>
> >> On 8/28/17, 3:20 PM, "piotrz" <pi...@gmail.com> wrote:
> >>
> >> >Hi Alex,
> >> >
> >> >I just did build using console. It look like there is a bug in
> >>Moonshine
> >> >partially.
> >> >
> >> >Build in Moonshine:
> >> >Basically when I run build it has failed with same error in Moonshine,
> >> >cause
> >> >every build generates custom configuration [1] which contains
> >> ><target-player>0.0.0</target-player> - if there is no player version
> in
> >> >frameworks/flex-config.xml (since I have commented out each line
> >>related
> >> >to
> >> >target-player).
> >> >
> >> >I will probably raise issue for Moonshine.
> >> >
> >> >Build in console:
> >> >Once I removed target-player from [2] build has been successful from
> >> >console. Unfortunately -html-template was completely omitted, so MDL
> >> >example
> >> >do not have any styles.
> >> >
> >> ><https://na01.safelinks.protection.outlook.com/?url=
> >> http%3A%2F%2Fapache-fl
> >> >ex-development.2333347.n4.nabble.com%2Ffile%2Fn64004%
> >> 2Fmdl_table_without_S
> >> >tyle.png&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> >> f776%7Cfa7b1b5a7b34
> >> >438794aed2c178decee1%7C0%7C0%7C636395556215578840&sdata=
> >> ZRxcO%2B%2Bn2wULt4
> >> >kn53d6ZZutOxqguNTjBteVF59TYrA%3D&reserved=0>
> >> >
> >> >[1]
> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> https%3A%2F%2Fpaste.apa
> >> >che.org%2FFbUb&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> >> f776%7Cfa7b1b
> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
> >> sdata=dhOREax1nh33
> >> >zGhlaqo9%2B0FD8g5YLY7B0yuRGd3kVKY%3D&reserved=0
> >> >[2]
> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> https%3A%2F%2Fpaste.apa
> >> >che.org%2Fl0mh&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
> >> f776%7Cfa7b1b
> >> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
> >> sdata=w2vD2jcJMjoi
> >> >9LYCR7z8ppgwHqe9J40G5G2fbl6uB40%3D&reserved=0
> >> >
> >> >Thanks,
> >> >Piotr
> >> >
> >> >
> >> >
> >> >-----
> >> >Apache Flex PMC
> >> >piotrzarzycki21@gmail.com
> >> >--
> >> >View this message in context:
> >> >https://na01.safelinks.protection.outlook.com/?url=
> >> http%3A%2F%2Fapache-fle
> >> >x-development.2333347.n4.nabble.com%2FFlex-JS-Flex-SDK-
> >> Installer-always-ge
> >> >t-stuck-at-Finish-uncompressing-tp63989p64004.
> >> html&data=02%7C01%7C%7C284e6
> >> >44bff584ab1b7d708d4ee62f776%7Cfa7b1b5a7b34438794aed2c178de
> >> cee1%7C0%7C0%7C6
> >> >36395556215578840&sdata=gd1LmXTytYAQOab3zLaTzWbAufOzK6
> >> e%2BfPf56%2FTeCIM%3D
> >> >&reserved=0
> >> >Sent from the Apache Flex Development mailing list archive at
> >>Nabble.com.
> >>
> >>
> >
> >
> >--
> >
> >Piotr Zarzycki
> >
> >mobile: +48 880 859 557
> >skype: zarzycki10
> >
> >LinkedIn:
> >https://na01.safelinks.protection.outlook.com/?url=
> http%3A%2F%2Fwww.linked
> >in.com%2Fpiotrzarzycki&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d
> 81d6%
> >7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&sdata=
> 2G5u
> >oQ%2F1AYn846xrab%2BaOsFvp4VCLVgXzQgOXqhicqA%3D&reserved=0
> ><https://na01.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fpl.linke
> >din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%
> 7C01%7C%7Ce185e651110c4c41e
> >85908d4f30d81d6%7Cfa7b1b5a7b34438794aed2c178de
> cee1%7C0%7C0%7C6364006867241
> >71224&sdata=SlLXtKNsN0w8CA3bqf6bA%2FBNjeowkDXUoBtdqb5LdxI%3D&reserved=0>
>
>
--
Piotr Zarzycki
mobile: +48 880 859 557
skype: zarzycki10
LinkedIn: http://www.linkedin.com/piotrzarzycki
<https://pl.linkedin.com/in/piotr-zarzycki-92a53552>
Re: [Flex JS] Flex SDK Installer always get stuck at "Finish
uncompressing"
Posted by Alex Harui <ah...@adobe.com.INVALID>.
OK, but if you specify a legitimate target-player but only specify JSFlex
output, I'm still wondering what part of the compiler is going to verify a
playerglobal.swc exists since playerglobal.swc shouldn’t be specified in
any external-library-path.
-Alex
On 9/3/17, 1:51 PM, "Piotr Zarzycki" <pi...@gmail.com> wrote:
>Hi Alex,
>
>I get back to this and look closer into compiler code regarding point #1.
>I
>see following comments in Configuration.java:
>
>"The major_version is required while minor_version and revision are
>optional. The minimum value is 10.0.0. If you do not specify the
>minor_version or revision, then the compiler uses zeros."
>
>In code I see that if I don't have in flex-config.xml <target-player> at
>all I have exception reported by this line [1]. That is why I'm seeing
>this
>one:
>
><target-player>0.0.0</target-player>
>
>
>[1]
>https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apa
>che.org%2FBB2R&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d81d6%7Cfa7b1b
>5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&sdata=ifbA81a5a5vw
>bE4yej1Ej4mzM4JkfTH3KtBzC95wvK8%3D&reserved=0
>
>Thanks,
>Piotr
>
>
>2017-08-29 6:36 GMT+02:00 Alex Harui <ah...@adobe.com.invalid>:
>
>> Hmm. It isn't obvious to me:
>>
>> 1) if you only have target=JSFlex, why does the compiler care about
>> target-player?
>> 2) Why did -htmlTemplate option not work?
>>
>> Maybe the console output would tell us more, or try putting
>> System.out.println calls into MXMLFlexJSPublisher.java to see why the
>> template wasn’t generated.
>>
>> HTH,
>> -Alex
>>
>> On 8/28/17, 3:20 PM, "piotrz" <pi...@gmail.com> wrote:
>>
>> >Hi Alex,
>> >
>> >I just did build using console. It look like there is a bug in
>>Moonshine
>> >partially.
>> >
>> >Build in Moonshine:
>> >Basically when I run build it has failed with same error in Moonshine,
>> >cause
>> >every build generates custom configuration [1] which contains
>> ><target-player>0.0.0</target-player> - if there is no player version in
>> >frameworks/flex-config.xml (since I have commented out each line
>>related
>> >to
>> >target-player).
>> >
>> >I will probably raise issue for Moonshine.
>> >
>> >Build in console:
>> >Once I removed target-player from [2] build has been successful from
>> >console. Unfortunately -html-template was completely omitted, so MDL
>> >example
>> >do not have any styles.
>> >
>> ><https://na01.safelinks.protection.outlook.com/?url=
>> http%3A%2F%2Fapache-fl
>> >ex-development.2333347.n4.nabble.com%2Ffile%2Fn64004%
>> 2Fmdl_table_without_S
>> >tyle.png&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> f776%7Cfa7b1b5a7b34
>> >438794aed2c178decee1%7C0%7C0%7C636395556215578840&sdata=
>> ZRxcO%2B%2Bn2wULt4
>> >kn53d6ZZutOxqguNTjBteVF59TYrA%3D&reserved=0>
>> >
>> >[1]
>> >https://na01.safelinks.protection.outlook.com/?url=
>> https%3A%2F%2Fpaste.apa
>> >che.org%2FFbUb&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> f776%7Cfa7b1b
>> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
>> sdata=dhOREax1nh33
>> >zGhlaqo9%2B0FD8g5YLY7B0yuRGd3kVKY%3D&reserved=0
>> >[2]
>> >https://na01.safelinks.protection.outlook.com/?url=
>> https%3A%2F%2Fpaste.apa
>> >che.org%2Fl0mh&data=02%7C01%7C%7C284e644bff584ab1b7d708d4ee62
>> f776%7Cfa7b1b
>> >5a7b34438794aed2c178decee1%7C0%7C0%7C636395556215578840&
>> sdata=w2vD2jcJMjoi
>> >9LYCR7z8ppgwHqe9J40G5G2fbl6uB40%3D&reserved=0
>> >
>> >Thanks,
>> >Piotr
>> >
>> >
>> >
>> >-----
>> >Apache Flex PMC
>> >piotrzarzycki21@gmail.com
>> >--
>> >View this message in context:
>> >https://na01.safelinks.protection.outlook.com/?url=
>> http%3A%2F%2Fapache-fle
>> >x-development.2333347.n4.nabble.com%2FFlex-JS-Flex-SDK-
>> Installer-always-ge
>> >t-stuck-at-Finish-uncompressing-tp63989p64004.
>> html&data=02%7C01%7C%7C284e6
>> >44bff584ab1b7d708d4ee62f776%7Cfa7b1b5a7b34438794aed2c178de
>> cee1%7C0%7C0%7C6
>> >36395556215578840&sdata=gd1LmXTytYAQOab3zLaTzWbAufOzK6
>> e%2BfPf56%2FTeCIM%3D
>> >&reserved=0
>> >Sent from the Apache Flex Development mailing list archive at
>>Nabble.com.
>>
>>
>
>
>--
>
>Piotr Zarzycki
>
>mobile: +48 880 859 557
>skype: zarzycki10
>
>LinkedIn:
>https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.linked
>in.com%2Fpiotrzarzycki&data=02%7C01%7C%7Ce185e651110c4c41e85908d4f30d81d6%
>7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636400686724171224&sdata=2G5u
>oQ%2F1AYn846xrab%2BaOsFvp4VCLVgXzQgOXqhicqA%3D&reserved=0
><https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpl.linke
>din.com%2Fin%2Fpiotr-zarzycki-92a53552&data=02%7C01%7C%7Ce185e651110c4c41e
>85908d4f30d81d6%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C6364006867241
>71224&sdata=SlLXtKNsN0w8CA3bqf6bA%2FBNjeowkDXUoBtdqb5LdxI%3D&reserved=0>