Questions ActiveMQ C++ Client

[rnelson <ro...@irisfinancial.com>]

Hello. 

I am wondering who has used the ActiveMQ C++ client.  I am using it under
4.0.2.  It seems to work fine, but there is one question I have: 

Under Windows, the following warning gets printed out: 

c:\ActiveMQ\activemq\connector\stomp\commands\AckCommand.h(102) : warning
C4390: ';' : empty controlled statement found; 

Looking at the source code, this is the case.  

My general question is how new the C++ client code is, and if is still being
written, or whether it is in a state that is generally considered robust?  
Any insights on its use would be great. 

Thanks,

Rob Nelson
rob.nelson@irisfinancial.com

-- 
View this message in context: http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7022558
Sent from the ActiveMQ - User mailing list archive at Nabble.com.

Re: Questions ActiveMQ C++ Client

[Nathan Mittler <na...@gmail.com>]

Hopefully soon, but that's about the best I can give you for now.  There is
still a bit of work that remains on the openwire side and right now we're
focused on cutting an official release with stomp.  As far as the support
for the amazon client is concerned, I believe that they have been involved
with the lists. It might be worth your time to ask others on the list to get
a feel for who is using the amazon client.

On 10/29/06, # Lalit Nagpal # <la...@gmail.com> wrote:
>
>
>
> Nathan-
>
> Openwire support, We already added this as a enhancement to our product
> ...
> just waiting for you guys to extend the openwire protocol support. The
> architecture & approach looks cool, but when is it coming up ... of course
> after the activemq-cpp v 1.0 release ... waiting for it now.
>
> You spoke about the openwire client contributed by amazon, I am a bit
> worried about the support that I may get if I go for that one.
>
> Lalit Nagpal
> CSA, Sungard
>
>
>
> nmittler wrote:
> >
> > I've fixed this in trunk.  Thanks for the heads up!
> >
> > On 10/28/06, Nathan Mittler <na...@gmail.com> wrote:
> >>
> >> We've been using gcc 4.x, which hasn't shown that warning - I'll take a
> >> look.  But yes - the support for the stomp protocol is mature at this
> >> point
> >> in activemq-cpp.  Of course, development is always going on - our main
> >> focus
> >> now is adding support for other wire protocols, specifically openwire.
> >>
> >> Regards,
> >> Nate
> >>
> >> On 10/27/06, Hiram Chirino <hi...@hiramchirino.com> wrote:
> >> >
> >> > That can be easily fixed.  Not all compilers give out the same
> >> warnings.
> >> >
> >> > activemq-cpp is very stable and should be nearing a stable release
> >> > shortly.
> >> >
> >> > On 10/26/06, rnelson < rob.nelson@irisfinancial.com> wrote:
> >> > >
> >> > > Hello.
> >> > >
> >> > > I am wondering who has used the ActiveMQ C++ client.  I am using it
> >> > under
> >> > > 4.0.2.  It seems to work fine, but there is one question I have:
> >> > >
> >> > > Under Windows, the following warning gets printed out:
> >> > >
> >> > > c:\ActiveMQ\activemq\connector\stomp\commands\AckCommand.h(102) :
> >> > warning
> >> > > C4390: ';' : empty controlled statement found;
> >> > >
> >> > > Looking at the source code, this is the case.
> >> > >
> >> > > My general question is how new the C++ client code is, and if is
> >> still
> >> > being
> >> > > written, or whether it is in a state that is generally considered
> >> > robust?
> >> > > Any insights on its use would be great.
> >> > >
> >> > > Thanks,
> >> > >
> >> > > Rob Nelson
> >> > > rob.nelson@irisfinancial.com
> >> > >
> >> > > --
> >> > > View this message in context:
> >> >
> >>
> http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7022558
> >> > > Sent from the ActiveMQ - User mailing list archive at Nabble.com.
> >> > >
> >> > >
> >> >
> >> >
> >> > --
> >> > Regards,
> >> > Hiram
> >> >
> >> > Blog: http://hiramchirino.com
> >> >
> >>
> >>
> >
> >
>
> --
> View this message in context:
> http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7059713
> Sent from the ActiveMQ - User mailing list archive at Nabble.com.
>
>

Re: Questions ActiveMQ C++ Client

[# Lalit Nagpal # <la...@gmail.com>]

Nathan-

Openwire support, We already added this as a enhancement to our product ...
just waiting for you guys to extend the openwire protocol support. The
architecture & approach looks cool, but when is it coming up ... of course
after the activemq-cpp v 1.0 release ... waiting for it now.

You spoke about the openwire client contributed by amazon, I am a bit
worried about the support that I may get if I go for that one.

Lalit Nagpal
CSA, Sungard



nmittler wrote:
> 
> I've fixed this in trunk.  Thanks for the heads up!
> 
> On 10/28/06, Nathan Mittler <na...@gmail.com> wrote:
>>
>> We've been using gcc 4.x, which hasn't shown that warning - I'll take a
>> look.  But yes - the support for the stomp protocol is mature at this
>> point
>> in activemq-cpp.  Of course, development is always going on - our main
>> focus
>> now is adding support for other wire protocols, specifically openwire.
>>
>> Regards,
>> Nate
>>
>> On 10/27/06, Hiram Chirino <hi...@hiramchirino.com> wrote:
>> >
>> > That can be easily fixed.  Not all compilers give out the same
>> warnings.
>> >
>> > activemq-cpp is very stable and should be nearing a stable release
>> > shortly.
>> >
>> > On 10/26/06, rnelson < rob.nelson@irisfinancial.com> wrote:
>> > >
>> > > Hello.
>> > >
>> > > I am wondering who has used the ActiveMQ C++ client.  I am using it
>> > under
>> > > 4.0.2.  It seems to work fine, but there is one question I have:
>> > >
>> > > Under Windows, the following warning gets printed out:
>> > >
>> > > c:\ActiveMQ\activemq\connector\stomp\commands\AckCommand.h(102) :
>> > warning
>> > > C4390: ';' : empty controlled statement found;
>> > >
>> > > Looking at the source code, this is the case.
>> > >
>> > > My general question is how new the C++ client code is, and if is
>> still
>> > being
>> > > written, or whether it is in a state that is generally considered
>> > robust?
>> > > Any insights on its use would be great.
>> > >
>> > > Thanks,
>> > >
>> > > Rob Nelson
>> > > rob.nelson@irisfinancial.com
>> > >
>> > > --
>> > > View this message in context:
>> >
>> http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7022558
>> > > Sent from the ActiveMQ - User mailing list archive at Nabble.com.
>> > >
>> > >
>> >
>> >
>> > --
>> > Regards,
>> > Hiram
>> >
>> > Blog: http://hiramchirino.com
>> >
>>
>>
> 
> 

-- 
View this message in context: http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7059713
Sent from the ActiveMQ - User mailing list archive at Nabble.com.

Re: Questions ActiveMQ C++ Client

[Nathan Mittler <na...@gmail.com>]

I've fixed this in trunk.  Thanks for the heads up!

On 10/28/06, Nathan Mittler <na...@gmail.com> wrote:
>
> We've been using gcc 4.x, which hasn't shown that warning - I'll take a
> look.  But yes - the support for the stomp protocol is mature at this point
> in activemq-cpp.  Of course, development is always going on - our main focus
> now is adding support for other wire protocols, specifically openwire.
>
> Regards,
> Nate
>
> On 10/27/06, Hiram Chirino <hi...@hiramchirino.com> wrote:
> >
> > That can be easily fixed.  Not all compilers give out the same warnings.
> >
> > activemq-cpp is very stable and should be nearing a stable release
> > shortly.
> >
> > On 10/26/06, rnelson < rob.nelson@irisfinancial.com> wrote:
> > >
> > > Hello.
> > >
> > > I am wondering who has used the ActiveMQ C++ client.  I am using it
> > under
> > > 4.0.2.  It seems to work fine, but there is one question I have:
> > >
> > > Under Windows, the following warning gets printed out:
> > >
> > > c:\ActiveMQ\activemq\connector\stomp\commands\AckCommand.h(102) :
> > warning
> > > C4390: ';' : empty controlled statement found;
> > >
> > > Looking at the source code, this is the case.
> > >
> > > My general question is how new the C++ client code is, and if is still
> > being
> > > written, or whether it is in a state that is generally considered
> > robust?
> > > Any insights on its use would be great.
> > >
> > > Thanks,
> > >
> > > Rob Nelson
> > > rob.nelson@irisfinancial.com
> > >
> > > --
> > > View this message in context:
> > http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7022558
> > > Sent from the ActiveMQ - User mailing list archive at Nabble.com.
> > >
> > >
> >
> >
> > --
> > Regards,
> > Hiram
> >
> > Blog: http://hiramchirino.com
> >
>
>

Re: Questions ActiveMQ C++ Client

[Nathan Mittler <na...@gmail.com>]

We've been using gcc 4.x, which hasn't shown that warning - I'll take a
look.  But yes - the support for the stomp protocol is mature at this point
in activemq-cpp.  Of course, development is always going on - our main focus
now is adding support for other wire protocols, specifically openwire.

Regards,
Nate

On 10/27/06, Hiram Chirino <hi...@hiramchirino.com> wrote:
>
> That can be easily fixed.  Not all compilers give out the same warnings.
>
> activemq-cpp is very stable and should be nearing a stable release
> shortly.
>
> On 10/26/06, rnelson <ro...@irisfinancial.com> wrote:
> >
> > Hello.
> >
> > I am wondering who has used the ActiveMQ C++ client.  I am using it
> under
> > 4.0.2.  It seems to work fine, but there is one question I have:
> >
> > Under Windows, the following warning gets printed out:
> >
> > c:\ActiveMQ\activemq\connector\stomp\commands\AckCommand.h(102) :
> warning
> > C4390: ';' : empty controlled statement found;
> >
> > Looking at the source code, this is the case.
> >
> > My general question is how new the C++ client code is, and if is still
> being
> > written, or whether it is in a state that is generally considered
> robust?
> > Any insights on its use would be great.
> >
> > Thanks,
> >
> > Rob Nelson
> > rob.nelson@irisfinancial.com
> >
> > --
> > View this message in context:
> http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7022558
> > Sent from the ActiveMQ - User mailing list archive at Nabble.com.
> >
> >
>
>
> --
> Regards,
> Hiram
>
> Blog: http://hiramchirino.com
>

Re: Questions ActiveMQ C++ Client

[Hiram Chirino <hi...@hiramchirino.com>]

That can be easily fixed.  Not all compilers give out the same warnings.

activemq-cpp is very stable and should be nearing a stable release shortly.

On 10/26/06, rnelson <ro...@irisfinancial.com> wrote:
>
> Hello.
>
> I am wondering who has used the ActiveMQ C++ client.  I am using it under
> 4.0.2.  It seems to work fine, but there is one question I have:
>
> Under Windows, the following warning gets printed out:
>
> c:\ActiveMQ\activemq\connector\stomp\commands\AckCommand.h(102) : warning
> C4390: ';' : empty controlled statement found;
>
> Looking at the source code, this is the case.
>
> My general question is how new the C++ client code is, and if is still being
> written, or whether it is in a state that is generally considered robust?
> Any insights on its use would be great.
>
> Thanks,
>
> Rob Nelson
> rob.nelson@irisfinancial.com
>
> --
> View this message in context: http://www.nabble.com/Questions-ActiveMQ-C%2B%2B-Client-tf2517793.html#a7022558
> Sent from the ActiveMQ - User mailing list archive at Nabble.com.
>
>


-- 
Regards,
Hiram

Blog: http://hiramchirino.com