You are viewing a plain text version of this content. The canonical link for it is here.
Posted to server-user@james.apache.org by ste <st...@webaccess.mozquito.com> on 2002/09/07 20:17:36 UTC
Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
by the way, could anybody please explain how to build the 2.1a1
milestone build?
The build script terminates 'cause it can't find the phoenix-bin/lib
directory so I also tried creating it myself with the same contents of
the bin directory from Phoenix4.0beta2 but then the error was:
build.xml:116: taskdef class
org.apache.avalon.phoenix.tools.tasks.Sar cannot be found.
What is the obvious piece of information that I am missing?
Is it OK to post this question here or should it be addressed to the
developer's list?
Thank you, ciao
ste
ste wrote:
> :-) I'm using 2.0a3 with SMTPHandler.java from 2.1a1 because even though
> I read the friendly manual I wasn't able to build 2.1a1 from sources,
> but for building 2.0a3 the instructions at:
>
> http://jakarta.apache.org/james/install.html
>
> step 0
>
> are correct (basically: download a source package, unpack it and run the
> build script provided therewith).
>
> ciao
> ste
>
> JRC wrote:
>
>> how do you rebuild from source? i'd like to try 2.1a1 with the
>> POP3Handler.java from 2.0a2......or 2.0a2 with the SMTPHandler.java from
>> 2.1a1.
>>
>> thanks.
>>
>> ----- Original Message -----
>> From: "ste" <st...@webaccess.mozquito.com>
>> To: "James Users List" <ja...@jakarta.apache.org>
>> Sent: Saturday, September 07, 2002 12:41 PM
>> Subject: Re: Hole in SMTP Auth fixed?
>>
>>
>>
>>> Mike Shoemaker wrote:
>>> > What is the minimum configuration to use pop3/smtp mail externally,
>>> > internally without being an open relay. I would prefer to enable smtp
>>> > auth.
>>> >
>>> > What portions of the config.xml must I change?
>>>
>>> Hi, I am new to James so please take my advice as you would take alpha
>>> software, here's how I did, step-by-step:
>>>
>>> 1) comment this:
>>> <mailet match="RemoteAddrNotInNetwork=127.0.0.1" class="ToProcessor">
>>> <processor> spam </processor>
>>> </mailet>
>>>
>>> (it's inside the "processor" element whose "name" attribute is
>>
>>
>> "transport")
>>
>>> 2) uncomment this:
>>> <authRequired>true</authRequired>
>>>
>>> (it's inside the "handler" element that is inside the "smtpserver"
>>
>>
>> element)
>>
>>> This is enough if you're using the latest milestone build (2.1a1).
>>>
>>> I am using James-2.0a3 and in order to get SMTP authentication to work
>>> with my mozilla client I had to perform one additional step:
>>>
>>> 3) replace the SMTPHandler.java source file in the 2.0a3 build with the
>>> same file from the 2.1a1 build and rebuild james from source
>>>
>>> Hope this helps, ciao
>>> ste
>>>
>>>
>>>
>>> --
>>> To unsubscribe, e-mail:
>>
>>
>> <ma...@jakarta.apache.org>
>>
>>> For additional commands, e-mail:
>>
>>
>> <ma...@jakarta.apache.org>
>>
>>>
>>
>>
>>
>>
>> --
>> To unsubscribe, e-mail:
>> <ma...@jakarta.apache.org>
>> For additional commands, e-mail:
>> <ma...@jakarta.apache.org>
>>
>>
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
Posted by Danny Angus <da...@apache.org>.
Ok if you don't understand the messages do this, before you run "build" in
the same terminal session type
> set JAVA_HOME=C:\j2sdk1.4.1 [enter]
or whatever the path to your JDK is.
you can check you've done it right by doing
> %JAVA_HOME%\bin\java -version
you'll see a short version message from java.
d.
> -----Original Message-----
> From: JRC [mailto:postmaster@neonkiwi.com]
> Sent: 07 September 2002 19:36
> To: James Users List
> Subject: Re: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
>
>
> i think i need a little building guidence...........what do i do now?
> thanks
>
> Microsoft Windows XP [Version 5.1.2600]
> (C) Copyright 1985-2001 Microsoft Corp.
>
> C:\james>build
>
> James Build System
> -------------------
>
> Warning: JAVA_HOME environment variable is not set.
> If build fails because sun.* classes could not be found
> you will need to set the JAVA_HOME environment variable
> to the installation directory of java.
>
> Buildfile: build.xml
>
> setup-properties:
>
> prepare:
>
> prepare-proposal:
>
> compile:
> Compiling 142 source files to C:\james\build\classes
>
> BUILD FAILED
>
> C:\james\build.xml:266: Cannot use classic compiler, as it is not
> available
> A co
> mmon solution is to set the environment variable JAVA_HOME to your jdk
> directory
> .
>
> Total time: 1 second
> C:\james>
>
>
> ----- Original Message -----
> From: "ste" <st...@webaccess.mozquito.com>
> To: "James Users List" <ja...@jakarta.apache.org>
> Sent: Saturday, September 07, 2002 1:17 PM
> Subject: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
>
>
> > by the way, could anybody please explain how to build the 2.1a1
> > milestone build?
> > The build script terminates 'cause it can't find the phoenix-bin/lib
> > directory so I also tried creating it myself with the same contents of
> > the bin directory from Phoenix4.0beta2 but then the error was:
> > build.xml:116: taskdef class
> > org.apache.avalon.phoenix.tools.tasks.Sar cannot be found.
> > What is the obvious piece of information that I am missing?
> > Is it OK to post this question here or should it be addressed to the
> > developer's list?
> > Thank you, ciao
> > ste
> >
> > ste wrote:
> > > :-) I'm using 2.0a3 with SMTPHandler.java from 2.1a1 because
> even though
> > > I read the friendly manual I wasn't able to build 2.1a1 from sources,
> > > but for building 2.0a3 the instructions at:
> > >
> > > http://jakarta.apache.org/james/install.html
> > >
> > > step 0
> > >
> > > are correct (basically: download a source package, unpack it
> and run the
> > > build script provided therewith).
> > >
> > > ciao
> > > ste
> > >
> > > JRC wrote:
> > >
> > >> how do you rebuild from source? i'd like to try 2.1a1 with the
> > >> POP3Handler.java from 2.0a2......or 2.0a2 with the SMTPHandler.java
> from
> > >> 2.1a1.
> > >>
> > >> thanks.
> > >>
> > >> ----- Original Message -----
> > >> From: "ste" <st...@webaccess.mozquito.com>
> > >> To: "James Users List" <ja...@jakarta.apache.org>
> > >> Sent: Saturday, September 07, 2002 12:41 PM
> > >> Subject: Re: Hole in SMTP Auth fixed?
> > >>
> > >>
> > >>
> > >>> Mike Shoemaker wrote:
> > >>> > What is the minimum configuration to use pop3/smtp mail
> externally,
> > >>> > internally without being an open relay. I would prefer to enable
> smtp
> > >>> > auth.
> > >>> >
> > >>> > What portions of the config.xml must I change?
> > >>>
> > >>> Hi, I am new to James so please take my advice as you would
> take alpha
> > >>> software, here's how I did, step-by-step:
> > >>>
> > >>> 1) comment this:
> > >>> <mailet match="RemoteAddrNotInNetwork=127.0.0.1"
> class="ToProcessor">
> > >>> <processor> spam </processor>
> > >>> </mailet>
> > >>>
> > >>> (it's inside the "processor" element whose "name" attribute is
> > >>
> > >>
> > >> "transport")
> > >>
> > >>> 2) uncomment this:
> > >>> <authRequired>true</authRequired>
> > >>>
> > >>> (it's inside the "handler" element that is inside the "smtpserver"
> > >>
> > >>
> > >> element)
> > >>
> > >>> This is enough if you're using the latest milestone build (2.1a1).
> > >>>
> > >>> I am using James-2.0a3 and in order to get SMTP
> authentication to work
> > >>> with my mozilla client I had to perform one additional step:
> > >>>
> > >>> 3) replace the SMTPHandler.java source file in the 2.0a3 build with
> the
> > >>> same file from the 2.1a1 build and rebuild james from source
> > >>>
> > >>> Hope this helps, ciao
> > >>> ste
> > >>>
> > >>>
> > >>>
> > >>> --
> > >>> To unsubscribe, e-mail:
> > >>
> > >>
> > >> <ma...@jakarta.apache.org>
> > >>
> > >>> For additional commands, e-mail:
> > >>
> > >>
> > >> <ma...@jakarta.apache.org>
> > >>
> > >>>
> > >>
> > >>
> > >>
> > >>
> > >> --
> > >> To unsubscribe, e-mail:
> > >> <ma...@jakarta.apache.org>
> > >> For additional commands, e-mail:
> > >> <ma...@jakarta.apache.org>
> > >>
> > >>
> > >
> > >
> > > --
> > > To unsubscribe, e-mail:
> > > <ma...@jakarta.apache.org>
> > > For additional commands, e-mail:
> > > <ma...@jakarta.apache.org>
> > >
> > >
> >
> >
> > --
> > To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> <ma...@jakarta.apache.org>
> >
> >
>
>
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
Posted by "Peter M. Goldstein" <pe...@yahoo.com>.
Set the JAVA_HOME directory to the installation directory of your Java
SDK.
--Peter
> -----Original Message-----
> From: JRC [mailto:postmaster@neonkiwi.com]
> Sent: Saturday, September 07, 2002 11:36 AM
> To: James Users List
> Subject: Re: Building 2.1a1 problems [was: Re: Hole in SMTP Auth
fixed?]
>
> i think i need a little building guidence...........what do i do now?
> thanks
>
> Microsoft Windows XP [Version 5.1.2600]
> (C) Copyright 1985-2001 Microsoft Corp.
>
> C:\james>build
>
> James Build System
> -------------------
>
> Warning: JAVA_HOME environment variable is not set.
> If build fails because sun.* classes could not be found
> you will need to set the JAVA_HOME environment variable
> to the installation directory of java.
>
> Buildfile: build.xml
>
> setup-properties:
>
> prepare:
>
> prepare-proposal:
>
> compile:
> Compiling 142 source files to C:\james\build\classes
>
> BUILD FAILED
>
> C:\james\build.xml:266: Cannot use classic compiler, as it is not
> available
> A co
> mmon solution is to set the environment variable JAVA_HOME to your jdk
> directory
> .
>
> Total time: 1 second
> C:\james>
>
>
> ----- Original Message -----
> From: "ste" <st...@webaccess.mozquito.com>
> To: "James Users List" <ja...@jakarta.apache.org>
> Sent: Saturday, September 07, 2002 1:17 PM
> Subject: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
>
>
> > by the way, could anybody please explain how to build the 2.1a1
> > milestone build?
> > The build script terminates 'cause it can't find the phoenix-bin/lib
> > directory so I also tried creating it myself with the same contents
of
> > the bin directory from Phoenix4.0beta2 but then the error was:
> > build.xml:116: taskdef class
> > org.apache.avalon.phoenix.tools.tasks.Sar cannot be found.
> > What is the obvious piece of information that I am missing?
> > Is it OK to post this question here or should it be addressed to the
> > developer's list?
> > Thank you, ciao
> > ste
> >
> > ste wrote:
> > > :-) I'm using 2.0a3 with SMTPHandler.java from 2.1a1 because even
> though
> > > I read the friendly manual I wasn't able to build 2.1a1 from
sources,
> > > but for building 2.0a3 the instructions at:
> > >
> > > http://jakarta.apache.org/james/install.html
> > >
> > > step 0
> > >
> > > are correct (basically: download a source package, unpack it and
run
> the
> > > build script provided therewith).
> > >
> > > ciao
> > > ste
> > >
> > > JRC wrote:
> > >
> > >> how do you rebuild from source? i'd like to try 2.1a1 with the
> > >> POP3Handler.java from 2.0a2......or 2.0a2 with the
SMTPHandler.java
> from
> > >> 2.1a1.
> > >>
> > >> thanks.
> > >>
> > >> ----- Original Message -----
> > >> From: "ste" <st...@webaccess.mozquito.com>
> > >> To: "James Users List" <ja...@jakarta.apache.org>
> > >> Sent: Saturday, September 07, 2002 12:41 PM
> > >> Subject: Re: Hole in SMTP Auth fixed?
> > >>
> > >>
> > >>
> > >>> Mike Shoemaker wrote:
> > >>> > What is the minimum configuration to use pop3/smtp mail
> externally,
> > >>> > internally without being an open relay. I would prefer to
enable
> smtp
> > >>> > auth.
> > >>> >
> > >>> > What portions of the config.xml must I change?
> > >>>
> > >>> Hi, I am new to James so please take my advice as you would take
> alpha
> > >>> software, here's how I did, step-by-step:
> > >>>
> > >>> 1) comment this:
> > >>> <mailet match="RemoteAddrNotInNetwork=127.0.0.1"
> class="ToProcessor">
> > >>> <processor> spam </processor>
> > >>> </mailet>
> > >>>
> > >>> (it's inside the "processor" element whose "name" attribute is
> > >>
> > >>
> > >> "transport")
> > >>
> > >>> 2) uncomment this:
> > >>> <authRequired>true</authRequired>
> > >>>
> > >>> (it's inside the "handler" element that is inside the
"smtpserver"
> > >>
> > >>
> > >> element)
> > >>
> > >>> This is enough if you're using the latest milestone build
(2.1a1).
> > >>>
> > >>> I am using James-2.0a3 and in order to get SMTP authentication
to
> work
> > >>> with my mozilla client I had to perform one additional step:
> > >>>
> > >>> 3) replace the SMTPHandler.java source file in the 2.0a3 build
with
> the
> > >>> same file from the 2.1a1 build and rebuild james from source
> > >>>
> > >>> Hope this helps, ciao
> > >>> ste
> > >>>
> > >>>
> > >>>
> > >>> --
> > >>> To unsubscribe, e-mail:
> > >>
> > >>
> > >> <ma...@jakarta.apache.org>
> > >>
> > >>> For additional commands, e-mail:
> > >>
> > >>
> > >> <ma...@jakarta.apache.org>
> > >>
> > >>>
> > >>
> > >>
> > >>
> > >>
> > >> --
> > >> To unsubscribe, e-mail:
> > >> <ma...@jakarta.apache.org>
> > >> For additional commands, e-mail:
> > >> <ma...@jakarta.apache.org>
> > >>
> > >>
> > >
> > >
> > > --
> > > To unsubscribe, e-mail:
> > > <ma...@jakarta.apache.org>
> > > For additional commands, e-mail:
> > > <ma...@jakarta.apache.org>
> > >
> > >
> >
> >
> > --
> > To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> <ma...@jakarta.apache.org>
> >
> >
>
>
>
>
> --
> To unsubscribe, e-mail: <mailto:james-user-
> unsubscribe@jakarta.apache.org>
> For additional commands, e-mail: <mailto:james-user-
> help@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
Posted by JRC <po...@neonkiwi.com>.
i think i need a little building guidence...........what do i do now?
thanks
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\james>build
James Build System
-------------------
Warning: JAVA_HOME environment variable is not set.
If build fails because sun.* classes could not be found
you will need to set the JAVA_HOME environment variable
to the installation directory of java.
Buildfile: build.xml
setup-properties:
prepare:
prepare-proposal:
compile:
Compiling 142 source files to C:\james\build\classes
BUILD FAILED
C:\james\build.xml:266: Cannot use classic compiler, as it is not available
A co
mmon solution is to set the environment variable JAVA_HOME to your jdk
directory
.
Total time: 1 second
C:\james>
----- Original Message -----
From: "ste" <st...@webaccess.mozquito.com>
To: "James Users List" <ja...@jakarta.apache.org>
Sent: Saturday, September 07, 2002 1:17 PM
Subject: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
> by the way, could anybody please explain how to build the 2.1a1
> milestone build?
> The build script terminates 'cause it can't find the phoenix-bin/lib
> directory so I also tried creating it myself with the same contents of
> the bin directory from Phoenix4.0beta2 but then the error was:
> build.xml:116: taskdef class
> org.apache.avalon.phoenix.tools.tasks.Sar cannot be found.
> What is the obvious piece of information that I am missing?
> Is it OK to post this question here or should it be addressed to the
> developer's list?
> Thank you, ciao
> ste
>
> ste wrote:
> > :-) I'm using 2.0a3 with SMTPHandler.java from 2.1a1 because even though
> > I read the friendly manual I wasn't able to build 2.1a1 from sources,
> > but for building 2.0a3 the instructions at:
> >
> > http://jakarta.apache.org/james/install.html
> >
> > step 0
> >
> > are correct (basically: download a source package, unpack it and run the
> > build script provided therewith).
> >
> > ciao
> > ste
> >
> > JRC wrote:
> >
> >> how do you rebuild from source? i'd like to try 2.1a1 with the
> >> POP3Handler.java from 2.0a2......or 2.0a2 with the SMTPHandler.java
from
> >> 2.1a1.
> >>
> >> thanks.
> >>
> >> ----- Original Message -----
> >> From: "ste" <st...@webaccess.mozquito.com>
> >> To: "James Users List" <ja...@jakarta.apache.org>
> >> Sent: Saturday, September 07, 2002 12:41 PM
> >> Subject: Re: Hole in SMTP Auth fixed?
> >>
> >>
> >>
> >>> Mike Shoemaker wrote:
> >>> > What is the minimum configuration to use pop3/smtp mail externally,
> >>> > internally without being an open relay. I would prefer to enable
smtp
> >>> > auth.
> >>> >
> >>> > What portions of the config.xml must I change?
> >>>
> >>> Hi, I am new to James so please take my advice as you would take alpha
> >>> software, here's how I did, step-by-step:
> >>>
> >>> 1) comment this:
> >>> <mailet match="RemoteAddrNotInNetwork=127.0.0.1" class="ToProcessor">
> >>> <processor> spam </processor>
> >>> </mailet>
> >>>
> >>> (it's inside the "processor" element whose "name" attribute is
> >>
> >>
> >> "transport")
> >>
> >>> 2) uncomment this:
> >>> <authRequired>true</authRequired>
> >>>
> >>> (it's inside the "handler" element that is inside the "smtpserver"
> >>
> >>
> >> element)
> >>
> >>> This is enough if you're using the latest milestone build (2.1a1).
> >>>
> >>> I am using James-2.0a3 and in order to get SMTP authentication to work
> >>> with my mozilla client I had to perform one additional step:
> >>>
> >>> 3) replace the SMTPHandler.java source file in the 2.0a3 build with
the
> >>> same file from the 2.1a1 build and rebuild james from source
> >>>
> >>> Hope this helps, ciao
> >>> ste
> >>>
> >>>
> >>>
> >>> --
> >>> To unsubscribe, e-mail:
> >>
> >>
> >> <ma...@jakarta.apache.org>
> >>
> >>> For additional commands, e-mail:
> >>
> >>
> >> <ma...@jakarta.apache.org>
> >>
> >>>
> >>
> >>
> >>
> >>
> >> --
> >> To unsubscribe, e-mail:
> >> <ma...@jakarta.apache.org>
> >> For additional commands, e-mail:
> >> <ma...@jakarta.apache.org>
> >>
> >>
> >
> >
> > --
> > To unsubscribe, e-mail:
> > <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> > <ma...@jakarta.apache.org>
> >
> >
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
> For additional commands, e-mail:
<ma...@jakarta.apache.org>
>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
Posted by Stefano Debenedetti <st...@webaccess.mozquito.com>.
Danny Angus wrote:
> Are you having trouble with the source download? or CVS?
I tried with both packages listed here:
http://jakarta.apache.org/builds/jakarta-james/latest/src/
but I get to the same showstopper.
> If its the source download, I think there may be a problem with it, try
> getting the source using cvs for now.
OK, thanks
ste
> d.
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
Posted by Danny Angus <da...@apache.org>.
Are you having trouble with the source download? or CVS?
If its the source download, I think there may be a problem with it, try
getting the source using cvs for now.
d.
> -----Original Message-----
> From: ste [mailto:ste@webaccess.mozquito.com]
> Sent: 07 September 2002 19:18
> To: James Users List
> Subject: Building 2.1a1 problems [was: Re: Hole in SMTP Auth fixed?]
>
>
> by the way, could anybody please explain how to build the 2.1a1
> milestone build?
> The build script terminates 'cause it can't find the phoenix-bin/lib
> directory so I also tried creating it myself with the same contents of
> the bin directory from Phoenix4.0beta2 but then the error was:
> build.xml:116: taskdef class
> org.apache.avalon.phoenix.tools.tasks.Sar cannot be found.
> What is the obvious piece of information that I am missing?
> Is it OK to post this question here or should it be addressed to the
> developer's list?
> Thank you, ciao
> ste
>
> ste wrote:
> > :-) I'm using 2.0a3 with SMTPHandler.java from 2.1a1 because
> even though
> > I read the friendly manual I wasn't able to build 2.1a1 from sources,
> > but for building 2.0a3 the instructions at:
> >
> > http://jakarta.apache.org/james/install.html
> >
> > step 0
> >
> > are correct (basically: download a source package, unpack it
> and run the
> > build script provided therewith).
> >
> > ciao
> > ste
> >
> > JRC wrote:
> >
> >> how do you rebuild from source? i'd like to try 2.1a1 with the
> >> POP3Handler.java from 2.0a2......or 2.0a2 with the
> SMTPHandler.java from
> >> 2.1a1.
> >>
> >> thanks.
> >>
> >> ----- Original Message -----
> >> From: "ste" <st...@webaccess.mozquito.com>
> >> To: "James Users List" <ja...@jakarta.apache.org>
> >> Sent: Saturday, September 07, 2002 12:41 PM
> >> Subject: Re: Hole in SMTP Auth fixed?
> >>
> >>
> >>
> >>> Mike Shoemaker wrote:
> >>> > What is the minimum configuration to use pop3/smtp mail externally,
> >>> > internally without being an open relay. I would prefer to
> enable smtp
> >>> > auth.
> >>> >
> >>> > What portions of the config.xml must I change?
> >>>
> >>> Hi, I am new to James so please take my advice as you would take alpha
> >>> software, here's how I did, step-by-step:
> >>>
> >>> 1) comment this:
> >>> <mailet match="RemoteAddrNotInNetwork=127.0.0.1" class="ToProcessor">
> >>> <processor> spam </processor>
> >>> </mailet>
> >>>
> >>> (it's inside the "processor" element whose "name" attribute is
> >>
> >>
> >> "transport")
> >>
> >>> 2) uncomment this:
> >>> <authRequired>true</authRequired>
> >>>
> >>> (it's inside the "handler" element that is inside the "smtpserver"
> >>
> >>
> >> element)
> >>
> >>> This is enough if you're using the latest milestone build (2.1a1).
> >>>
> >>> I am using James-2.0a3 and in order to get SMTP authentication to work
> >>> with my mozilla client I had to perform one additional step:
> >>>
> >>> 3) replace the SMTPHandler.java source file in the 2.0a3
> build with the
> >>> same file from the 2.1a1 build and rebuild james from source
> >>>
> >>> Hope this helps, ciao
> >>> ste
> >>>
> >>>
> >>>
> >>> --
> >>> To unsubscribe, e-mail:
> >>
> >>
> >> <ma...@jakarta.apache.org>
> >>
> >>> For additional commands, e-mail:
> >>
> >>
> >> <ma...@jakarta.apache.org>
> >>
> >>>
> >>
> >>
> >>
> >>
> >> --
> >> To unsubscribe, e-mail:
> >> <ma...@jakarta.apache.org>
> >> For additional commands, e-mail:
> >> <ma...@jakarta.apache.org>
> >>
> >>
> >
> >
> > --
> > To unsubscribe, e-mail:
> > <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> > <ma...@jakarta.apache.org>
> >
> >
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>