You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@geode.apache.org by kl...@apache.org on 2016/02/23 21:23:40 UTC
[44/94] [abbrv] [partial] incubator-geode git commit: Merge
remote-tracking branch 'origin/develop' into feature/GEODE-917
http://git-wip-us.apache.org/repos/asf/incubator-geode/blob/5beaaedc/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
----------------------------------------------------------------------
diff --cc geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
index d13dae5,0000000..b0be89f
mode 100644,000000..100644
--- a/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
+++ b/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
@@@ -1,2046 -1,0 +1,2051 @@@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package com.gemstone.gemfire.distributed;
+
+import java.io.File;
+import java.io.FileNotFoundException;
+import java.io.IOException;
+import java.lang.management.ManagementFactory;
+import java.net.ConnectException;
+import java.net.InetAddress;
+import java.net.UnknownHostException;
+import java.util.Arrays;
+import java.util.Collections;
+import java.util.HashMap;
+import java.util.List;
+import java.util.Map;
+import java.util.Properties;
+import java.util.TreeMap;
+import java.util.concurrent.TimeUnit;
+import java.util.concurrent.TimeoutException;
+import java.util.concurrent.atomic.AtomicBoolean;
+import java.util.concurrent.atomic.AtomicReference;
+import java.util.logging.Level;
+
+import javax.management.MalformedObjectNameException;
+import javax.management.ObjectName;
+
+import com.gemstone.gemfire.cache.client.internal.locator.LocatorStatusResponse;
+import com.gemstone.gemfire.distributed.internal.DistributionConfig;
+import com.gemstone.gemfire.distributed.internal.InternalLocator;
+import com.gemstone.gemfire.internal.DistributionLocator;
+import com.gemstone.gemfire.internal.GemFireVersion;
+import com.gemstone.gemfire.internal.SocketCreator;
+import com.gemstone.gemfire.internal.i18n.LocalizedStrings;
+import com.gemstone.gemfire.internal.lang.ObjectUtils;
+import com.gemstone.gemfire.internal.lang.StringUtils;
+import com.gemstone.gemfire.internal.lang.SystemUtils;
+import com.gemstone.gemfire.internal.process.ConnectionFailedException;
+import com.gemstone.gemfire.internal.process.ControlNotificationHandler;
+import com.gemstone.gemfire.internal.process.ControllableProcess;
+import com.gemstone.gemfire.internal.process.FileAlreadyExistsException;
+import com.gemstone.gemfire.internal.process.MBeanInvocationFailedException;
+import com.gemstone.gemfire.internal.process.PidUnavailableException;
+import com.gemstone.gemfire.internal.process.ProcessController;
+import com.gemstone.gemfire.internal.process.ProcessControllerFactory;
+import com.gemstone.gemfire.internal.process.ProcessControllerParameters;
+import com.gemstone.gemfire.internal.process.ProcessLauncherContext;
+import com.gemstone.gemfire.internal.process.ProcessType;
+import com.gemstone.gemfire.internal.process.ProcessUtils;
+import com.gemstone.gemfire.internal.process.StartupStatusListener;
+import com.gemstone.gemfire.internal.process.UnableToControlProcessException;
+import com.gemstone.gemfire.internal.util.IOUtils;
+import com.gemstone.gemfire.lang.AttachAPINotFoundException;
+import com.gemstone.gemfire.management.internal.cli.json.GfJsonArray;
+import com.gemstone.gemfire.management.internal.cli.json.GfJsonException;
+import com.gemstone.gemfire.management.internal.cli.json.GfJsonObject;
+import joptsimple.OptionException;
+import joptsimple.OptionParser;
+import joptsimple.OptionSet;
+
+/**
+ * The LocatorLauncher class is a launcher for a GemFire Locator.
+ *
+ * @author John Blum
+ * @author Kirk Lund
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher
+ * @see com.gemstone.gemfire.distributed.ServerLauncher
+ * @since 7.0
+ */
+@SuppressWarnings({ "unused" })
+public final class LocatorLauncher extends AbstractLauncher<String> {
+
+ /**
+ * @deprecated This is specific to the internal implementation and may go away in a future release.
+ */
+ public static final Integer DEFAULT_LOCATOR_PORT = getDefaultLocatorPort();
+
+ private static final Boolean DEFAULT_LOAD_SHARED_CONFIG_FROM_DIR = Boolean.FALSE;
+
+ private static final Map<String, String> helpMap = new HashMap<>();
+
+ static {
+ helpMap.put("launcher", LocalizedStrings.LocatorLauncher_LOCATOR_LAUNCHER_HELP.toLocalizedString());
+ helpMap.put(Command.START.getName(), LocalizedStrings.LocatorLauncher_START_LOCATOR_HELP.toLocalizedString(String.valueOf(
+ getDefaultLocatorPort())));
+ helpMap.put(Command.STATUS.getName(), LocalizedStrings.LocatorLauncher_STATUS_LOCATOR_HELP.toLocalizedString());
+ helpMap.put(Command.STOP.getName(),LocalizedStrings.LocatorLauncher_STOP_LOCATOR_HELP.toLocalizedString());
+ helpMap.put(Command.VERSION.getName(), LocalizedStrings.LocatorLauncher_VERSION_LOCATOR_HELP.toLocalizedString());
+ helpMap.put("bind-address", LocalizedStrings.LocatorLauncher_LOCATOR_BIND_ADDRESS_HELP.toLocalizedString());
+ helpMap.put("debug",LocalizedStrings.LocatorLauncher_LOCATOR_DEBUG_HELP.toLocalizedString());
+ helpMap.put("dir",LocalizedStrings.LocatorLauncher_LOCATOR_DIR_HELP.toLocalizedString());
+ helpMap.put("force", LocalizedStrings.LocatorLauncher_LOCATOR_FORCE_HELP.toLocalizedString());
+ helpMap.put("help", LocalizedStrings.SystemAdmin_CAUSES_GEMFIRE_TO_PRINT_OUT_INFORMATION_INSTEAD_OF_PERFORMING_THE_COMMAND_THIS_OPTION_IS_SUPPORTED_BY_ALL_COMMANDS.toLocalizedString());
+ helpMap.put("hostname-for-clients", LocalizedStrings.LocatorLauncher_LOCATOR_HOSTNAME_FOR_CLIENTS_HELP.toLocalizedString());
+ helpMap.put("member", LocalizedStrings.LocatorLauncher_LOCATOR_MEMBER_HELP.toLocalizedString());
+ helpMap.put("pid", LocalizedStrings.LocatorLauncher_LOCATOR_PID_HELP.toLocalizedString());
+ helpMap.put("port", LocalizedStrings.LocatorLauncher_LOCATOR_PORT_HELP.toLocalizedString(String.valueOf(
+ getDefaultLocatorPort())));
+ helpMap.put("redirect-output", LocalizedStrings.LocatorLauncher_LOCATOR_REDIRECT_OUTPUT_HELP.toLocalizedString());
+ }
+
+ private static final Map<Command, String> usageMap = new TreeMap<>();
+
+ static {
+ usageMap.put(Command.START, "start <member-name> [--bind-address=<IP-address>] [--hostname-for-clients=<IP-address>] [--port=<port>] [--dir=<Locator-working-directory>] [--force] [--debug] [--help]");
+ usageMap.put(Command.STATUS, "status [--bind-address=<IP-address>] [--port=<port>] [--member=<member-ID/Name>] [--pid=<process-ID>] [--dir=<Locator-working-directory>] [--debug] [--help]");
+ usageMap.put(Command.STOP, "stop [--member=<member-ID/Name>] [--pid=<process-ID>] [--dir=<Locator-working-directory>] [--debug] [--help]");
+ usageMap.put(Command.VERSION, "version");
+ }
+
+ /**
+ * @deprecated This is specific to the internal implementation and may go away in a future release.
+ */
+ public static final boolean DEFAULT_ENABLE_PEER_LOCATION = true;
+
+ /**
+ * @deprecated This is specific to the internal implementation and may go away in a future release.
+ */
+ public static final boolean DEFAULT_ENABLE_SERVER_LOCATION = true;
+
+ /**
+ * @deprecated This is specific to the internal implementation and may go away in a future release.
+ */
+ public static final String DEFAULT_LOCATOR_PID_FILE = "vf.gf.locator.pid";
+
+ private static final String DEFAULT_LOCATOR_LOG_EXT = ".log";
+ private static final String DEFAULT_LOCATOR_LOG_NAME = "locator";
+ private static final String LOCATOR_SERVICE_NAME = "Locator";
+
+ private static final AtomicReference<LocatorLauncher> INSTANCE = new AtomicReference<>();
+
+ //private volatile transient boolean debug;
+
+ private final transient ControlNotificationHandler controlHandler;
+
+ private final AtomicBoolean starting = new AtomicBoolean(false);
+
+ private final boolean force;
+ private final boolean help;
+ private final boolean redirectOutput;
+
+ private final Command command;
+
+ private final boolean bindAddressSpecified;
+ private final boolean portSpecified;
+ private final boolean workingDirectorySpecified;
+
+ private final InetAddress bindAddress;
+
+ private final Integer pid;
+ private final Integer port;
+
+ private volatile transient InternalLocator locator;
+
+ private final Properties distributedSystemProperties;
+
+ private final String hostnameForClients;
+ private final String memberName;
+ private final String workingDirectory;
+
+ // NOTE in addition to debug and locator, the other shared, mutable state
+ private volatile transient String statusMessage;
+
+ private volatile transient ControllableProcess process;
+
+ private final transient LocatorControllerParameters controllerParameters;
+
+ /**
+ * Launches a GemFire Locator from the command-line configured with the given arguments.
+ *
+ * @param args the command-line arguments used to configure the GemFire Locator at runtime.
+ */
+ public static void main(final String... args) {
+ try {
+ new Builder(args).build().run();
+ }
+ catch (AttachAPINotFoundException e) {
+ System.err.println(e.getMessage());
+ }
+ }
+
+ private static Integer getDefaultLocatorPort() {
+ return Integer.getInteger(DistributionLocator.TEST_OVERRIDE_DEFAULT_PORT_PROPERTY,
+ DistributionLocator.DEFAULT_LOCATOR_PORT);
+ }
+
+ /**
+ * Gets the instance of the LocatorLauncher used to launch the GemFire Locator, or null if this VM does not
+ * have an instance of LocatorLauncher indicating no GemFire Locator is running.
+ *
+ * @return the instance of LocatorLauncher used to launcher a GemFire Locator in this VM.
+ */
+ public static LocatorLauncher getInstance() {
+ return INSTANCE.get();
+ }
+
+ /**
+ * Gets the LocatorState for this process or null if this process was not launched using this VM's
+ * LocatorLauncher reference.
+ *
+ * @return the LocatorState for this process or null.
+ */
+ public static LocatorState getLocatorState() {
+ return (getInstance() != null ? getInstance().status() : null);
+ }
+
+ /**
+ * Private constructor used to properly construct an immutable instance of the LocatorLauncher using a Builder.
+ * The Builder is used to configure a LocatorLauncher instance. The Builder can process user input from the
+ * command-line or be used to properly construct an instance of the LocatorLauncher programmatically using the API.
+ *
+ * @param builder an instance of LocatorLauncher.Builder for configuring and constructing an instance of the
+ * LocatorLauncher.
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Builder
+ */
+ private LocatorLauncher(final Builder builder) {
+ this.command = builder.getCommand();
+ setDebug(Boolean.TRUE.equals(builder.getDebug()));
+ this.force = Boolean.TRUE.equals(builder.getForce());
+ this.help = Boolean.TRUE.equals(builder.getHelp());
+ this.bindAddressSpecified = builder.isBindAddressSpecified();
+ this.bindAddress = builder.getBindAddress();
+ this.distributedSystemProperties = builder.getDistributedSystemProperties();
+ this.hostnameForClients = builder.getHostnameForClients();
+ this.memberName = builder.getMemberName();
+ // TODO:KIRK: set ThreadLocal for LogService with getLogFile or getLogFileName
+ this.pid = builder.getPid();
+ this.portSpecified = builder.isPortSpecified();
+ this.port = builder.getPort();
+ this.redirectOutput = Boolean.TRUE.equals(builder.getRedirectOutput());
+ this.workingDirectorySpecified = builder.isWorkingDirectorySpecified();
+ this.workingDirectory = builder.getWorkingDirectory();
+ this.controllerParameters = new LocatorControllerParameters();
+ this.controlHandler = new ControlNotificationHandler() {
+ @Override
+ public void handleStop() {
+ if (isStoppable()) {
+ stopInProcess();
+ }
+ }
+ @Override
+ public ServiceState<?> handleStatus() {
+ return statusInProcess();
+ }
+ };
+ }
+
+ /**
+ * Gets the reference to the Locator object representing the running GemFire Locator.
+ *
+ * @return a reference to the Locator.
+ */
+ final InternalLocator getLocator() {
+ return this.locator;
+ }
+
+ /**
+ * Gets an identifier that uniquely identifies and represents the Locator associated with this launcher.
+ *
+ * @return a String value identifier to uniquely identify the Locator and it's launcher.
+ * @see #getBindAddressAsString()
+ * @see #getPortAsString()
+ */
+ public final String getId() {
+ return LocatorState.getBindAddressAsString(this).concat("[").concat(LocatorState.getPortAsString(this)).concat("]");
+ }
+
+ /**
+ * Get the Locator launcher command used to invoke the Locator.
+ *
+ * @return the Locator launcher command used to invoke the Locator.
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Command
+ */
+ public Command getCommand() {
+ return this.command;
+ }
+
+ /**
+ * Determines whether the PID file is allowed to be overwritten when the Locator is started and a PID file
+ * already exists in the Locator's specified working directory.
+ *
+ * @return boolean indicating if force has been enabled.
+ */
+ public boolean isForcing() {
+ return this.force;
+ }
+
+ /**
+ * Determines whether this launcher will be used to display help information. If so, then none of the standard
+ * Locator launcher commands will be used to affect the state of the Locator. A launcher is said to be 'helping'
+ * if the user entered the "--help" option (switch) on the command-line.
+ *
+ * @return a boolean value indicating if this launcher is used for displaying help information.
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Command
+ */
+ public boolean isHelping() {
+ return this.help;
+ }
+
+ /**
+ * Determines whether this launcher will redirect output to system logs when
+ * starting a new Locator process.
+ *
+ * @return a boolean value indicating if this launcher will redirect output
+ * to system logs when starting a new Locator process
+ */
+ public boolean isRedirectingOutput() {
+ return this.redirectOutput;
+ }
+
+ /**
+ * Gets the IP address of the NIC to which the Locator has bound itself listening for client requests.
+ *
+ * @return an InetAddress object representing the configured bind address for the Locator.
+ * @see java.net.InetAddress
+ */
+ public InetAddress getBindAddress() {
+ return this.bindAddress;
+ }
+
+ /**
+ * Gets the host, as either hostname or IP address, on which the Locator was bound and running. An attempt is made
+ * to get the canonical hostname for IP address to which the Locator was bound for accepting client requests. If
+ * the bind address is null or localhost is unknown, then a default String value of "localhost/127.0.0.1" is returned.
+ *
+ * Note, this information is purely information and should not be used to re-construct state or for
+ * other purposes.
+ *
+ * @return the hostname or IP address of the host running the Locator, based on the bind-address, or
+ * 'localhost/127.0.0.1' if the bind address is null and localhost is unknown.
+ * @see java.net.InetAddress
+ * @see #getBindAddress()
+ */
+ protected String getBindAddressAsString() {
+ try {
+ if (getBindAddress() != null) {
+ return getBindAddress().getCanonicalHostName();
+ }
+
+ InetAddress localhost = SocketCreator.getLocalHost();
+
+ return localhost.getCanonicalHostName();
+ }
+ catch (UnknownHostException ignore) {
+ // TODO determine a better value for the host on which the Locator is running to return here...
+ // NOTE returning localhost/127.0.0.1 implies the bindAddress was null and no IP address for localhost
+ // could be found
+ return "localhost/127.0.0.1";
+ }
+ }
+
+ /**
+ * Gets the hostname that clients will use to lookup the running Locator.
+ *
+ * @return a String indicating the hostname used by clients to lookup the Locator.
+ */
+ public String getHostnameForClients() {
+ return this.hostnameForClients;
+ }
+
+ /**
+ * Gets the name of the log file used to log information about this Locator.
+ *
+ * @return a String value indicating the name of this Locator's log file.
+ */
+ public String getLogFileName() {
+ return StringUtils.defaultIfBlank(getMemberName(), DEFAULT_LOCATOR_LOG_NAME).concat(DEFAULT_LOCATOR_LOG_EXT);
+ }
+
+ /**
+ * Gets the name of this member (this Locator) in the GemFire distributed system and determined by the 'name' GemFire
+ * property.
+ *
+ * @return a String indicating the name of the member (this Locator) in the GemFire distributed system.
+ * @see AbstractLauncher#getMemberName()
+ */
+ public String getMemberName() {
+ return StringUtils.defaultIfBlank(this.memberName, super.getMemberName());
+ }
+
+ /**
+ * Gets the user-specified process ID (PID) of the running Locator that LocatorLauncher uses to issue status and
+ * stop commands to the Locator.
+ *
+ * @return an Integer value indicating the process ID (PID) of the running Locator.
+ */
+ @Override
+ public Integer getPid() {
+ return this.pid;
+ }
+
+ /**
+ * Gets the port number on which the Locator listens for client requests.
+ *
+ * @return an Integer value indicating the port number on which the Locator is listening for client requests.
+ */
+ public Integer getPort() {
+ return this.port;
+ }
+
+ /**
+ * Gets the port number represented as a String value. If the port number is null, the the default Locator port
+ * (10334) is returned;
+ *
+ * @return the port number as a String value.
+ * @see #getPort()
+ */
+ public String getPortAsString() {
+ return ObjectUtils.defaultIfNull(getPort(), getDefaultLocatorPort()).toString();
+ }
+
+ /**
+ * Gets the GemFire Distributed System (cluster) Properties.
+ *
+ * @return a Properties object containing the configuration settings for the GemFire Distributed System (cluster).
+ * @see java.util.Properties
+ */
+ public Properties getProperties() {
+ return (Properties) this.distributedSystemProperties.clone();
+ }
+
+ /**
+ * Gets the name for a GemFire Locator.
+ *
+ * @return a String indicating the name for a GemFire Locator.
+ */
+ public String getServiceName() {
+ return LOCATOR_SERVICE_NAME;
+ }
+
+ /**
+ * Gets the working directory pathname in which the Locator will be run.
+ *
+ * @return a String value indicating the pathname of the Locator's working directory.
+ */
+ @Override
+ public String getWorkingDirectory() {
+ return this.workingDirectory;
+ }
+
+ /**
+ * Displays help for the specified Locator launcher command to standard err. If the Locator launcher command
+ * is unspecified, then usage information is displayed instead.
+ *
+ * @param command the Locator launcher command in which to display help information.
+ * @see #usage()
+ */
+ public void help(final Command command) {
+ if (Command.isUnspecified(command)) {
+ usage();
+ }
+ else {
+ info(StringUtils.wrap(helpMap.get(command.getName()), 80, ""));
+ info("\n\nusage: \n\n");
+ info(StringUtils.wrap("> java ... " + getClass().getName() + " " + usageMap.get(command), 80, "\t\t"));
+ info("\n\noptions: \n\n");
+
+ for (String option : command.getOptions()) {
+ info(StringUtils.wrap("--" + option + ": " + helpMap.get(option) + "\n", 80, "\t"));
+ }
+
+ info("\n\n");
+ }
+ }
+
+ /**
+ * Displays usage information on the proper invocation of the LocatorLauncher from the command-line to standard err.
+ *
+ * @see #help(com.gemstone.gemfire.distributed.LocatorLauncher.Command)
+ */
+ public void usage() {
+ info(StringUtils.wrap(helpMap.get("launcher"), 80, "\t"));
+ info("\n\nSTART\n\n");
+ help(Command.START);
+ info("STATUS\n\n");
+ help(Command.STATUS);
+ info("STOP\n\n");
+ help(Command.STOP);
+ }
+
+ /**
+ * The Runnable method used to launch the Locator with the specified command. If 'start' has been issued, then run
+ * will block as expected for the Locator to stop. The 'start' command is implemented with a call to start()
+ * followed by a call to waitOnLocator().
+ *
+ * @see java.lang.Runnable
+ * @see LocatorLauncher.Command
+ * @see LocatorLauncher#start()
+ * @see LocatorLauncher#waitOnLocator()
+ * @see LocatorLauncher#status()
+ * @see LocatorLauncher#stop()
+ * @see LocatorLauncher#version()
+ * @see LocatorLauncher#help(com.gemstone.gemfire.distributed.LocatorLauncher.Command)
+ * @see LocatorLauncher#usage()
+ */
+ public void run() {
+ if (!isHelping()) {
+ switch (getCommand()) {
+ case START:
+ info(start());
+ waitOnLocator();
+ break;
+ case STATUS:
+ info(status());
+ break;
+ case STOP:
+ info(stop());
+ break;
+ case VERSION:
+ info(version());
+ break;
+ default:
+ usage();
+ }
+ }
+ else {
+ help(getCommand());
+ }
+ }
+
+ /**
+ * Gets a File reference with the path to the PID file for the Locator.
+ *
+ * @return a File reference to the path of the Locator's PID file.
+ */
+ protected File getLocatorPidFile() {
+ return new File(getWorkingDirectory(), ProcessType.LOCATOR.getPidFileName());
+ }
+
+ /**
+ * Determines whether a GemFire Locator can be started with this instance of LocatorLauncher.
+ *
+ * @return a boolean indicating whether a GemFire Locator can be started with this instance of LocatorLauncher,
+ * which is true if the LocatorLauncher has not already started a Locator or a Locator is not already running.
+ * @see #start()
+ */
+ private boolean isStartable() {
+ return (!isRunning() && this.starting.compareAndSet(false, true));
+ }
+
+ /**
+ * Starts a Locator running on the specified port and bind address, as determined by getPort and getBindAddress
+ * respectively, defaulting to 10334 and 'localhost' if not specified, with both peer and server location enabled.
+ *
+ * 'start' is an asynchronous invocation of the Locator. As such, this method makes no guarantees whether the
+ * Locator's location services (peer and server) are actually running before it returns. The Locator's
+ * location-based services are initiated in separate, daemon Threads and depends on the relative timing
+ * and scheduling of those Threads by the JVM. If the application using this API wishes for the Locator to continue
+ * running after normal application processing completes, then one must call <code>waitOnLocator</code>.
+ *
+ * Given the nature of start, the Locator's status will be in either 1 of 2 possible states. If the 'request' to
+ * start the Locator proceeds without exception, the status will be 'STARTED'. However, if any exception is
+ * encountered during the normal startup sequence, then a RuntimeException is thrown and the status is set to
+ * 'STOPPED'.
+ *
+ * @return a LocatorState to reflect the state of the Locator after start.
+ * @throws RuntimeException if the Locator failed to start for any reason.
+ * @throws IllegalStateException if the Locator is already running.
+ * @see #failOnStart(Throwable)
+ * @see #getBindAddress()
+ * @see #getDistributedSystemProperties()
+ * @see #isForcing()
+ * @see #getLogFile()
+ * @see #getLocatorPidFile
+ * @see #getPort()
+ * @see #status()
+ * @see #stop()
+ * @see #waitOnLocator()
+ * @see #waitOnStatusResponse(long, long, java.util.concurrent.TimeUnit)
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.LocatorState
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.Status#NOT_RESPONDING
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.Status#ONLINE
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.Status#STARTING
+ */
+ @SuppressWarnings("deprecation")
+ public LocatorState start() {
+ if (isStartable()) {
+ INSTANCE.compareAndSet(null, this);
+
+ try {
+ this.process = new ControllableProcess(this.controlHandler, new File(getWorkingDirectory()), ProcessType.LOCATOR, isForcing());
+
+ assertPortAvailable(getBindAddress(), getPort());
+
+ ProcessLauncherContext.set(isRedirectingOutput(), getOverriddenDefaults(), new StartupStatusListener() {
+ @Override
+ public void setStatus(final String statusMessage) {
+ LocatorLauncher.this.statusMessage = statusMessage;
+ }
+ });
+
+ //TODO : remove the extra param for loadFromSharedConfigDir
+ try {
+ this.locator = InternalLocator.startLocator(getPort(), getLogFile(), null, null, null, getBindAddress(),
+ getDistributedSystemProperties(), DEFAULT_ENABLE_PEER_LOCATION, DEFAULT_ENABLE_SERVER_LOCATION,
+ getHostnameForClients(), false);
+ }
+ finally {
+ ProcessLauncherContext.remove();
+ }
+
+ debug("Running Locator on (%1$s) in (%2$s) as (%2$s)...", getId(), getWorkingDirectory(), getMember());
+ running.set(true);
+
+ return new LocatorState(this, Status.ONLINE);
+ }
+ catch (IOException e) {
+ failOnStart(e);
+ throw new RuntimeException(LocalizedStrings.Launcher_Command_START_IO_ERROR_MESSAGE.toLocalizedString(
+ getServiceName(), getWorkingDirectory(), getId(), e.getMessage()), e);
+ }
+ catch (FileAlreadyExistsException e) {
+ failOnStart(e);
+ throw new RuntimeException(LocalizedStrings.Launcher_Command_START_PID_FILE_ALREADY_EXISTS_ERROR_MESSAGE
+ .toLocalizedString(getServiceName(), getWorkingDirectory(), getId()), e);
+ }
+ catch (PidUnavailableException e) {
+ failOnStart(e);
+ throw new RuntimeException(LocalizedStrings.Launcher_Command_START_PID_UNAVAILABLE_ERROR_MESSAGE
+ .toLocalizedString(getServiceName(), getId(), getWorkingDirectory(), e.getMessage()), e);
+ }
+ catch (Error e) {
+ failOnStart(e);
+ throw e;
+ }
+ catch (RuntimeException e) {
+ failOnStart(e);
+ throw e;
+ }
+ catch (Exception e) {
+ failOnStart(e);
+ throw new RuntimeException(e);
+ }
+ finally {
+ this.starting.set(false);
+ }
+ }
+ else {
+ throw new IllegalStateException(LocalizedStrings.Launcher_Command_START_SERVICE_ALREADY_RUNNING_ERROR_MESSAGE
+ .toLocalizedString(getServiceName(), getWorkingDirectory(), getId()));
+ }
+ }
+
+ @Override
+ protected Properties getDistributedSystemProperties() {
+ Properties properties = super.getDistributedSystemProperties(getProperties());
+ return properties;
+ }
+
+ /**
+ * A helper method to ensure the same sequence of actions are taken when the Locator fails to start
+ * caused by some exception.
+ *
+ * @param cause the Throwable thrown during the startup or wait operation on the Locator.
+ */
+ private void failOnStart(final Throwable cause) {
+
+ if (cause != null) {
+ logger.log(Level.INFO, "locator is exiting due to an exception", cause);
+ } else {
+ logger.log(Level.INFO, "locator is exiting normally");
+ }
+
+ if (this.locator != null) {
+ this.locator.stop();
+ this.locator = null;
+ }
+ if (this.process != null) {
+ this.process.stop();
+ this.process = null;
+ }
+
+ INSTANCE.compareAndSet(this, null);
+
+ this.running.set(false);
+ }
+
+ /**
+ * Waits on the Locator to stop causing the calling Thread to join with the Locator's location-based services Thread.
+ *
+ * @return the Locator's status once it stops.
+ * @throws AssertionError if the Locator has not been started and the reference is null (assertions must be enabled
+ * for the error to be thrown).
+ * @see #failOnStart(Throwable)
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.Status
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.LocatorState
+ */
+ public LocatorState waitOnLocator() {
+ Throwable t = null;
+
+ try {
+ // make sure the Locator was started and the reference was set
+ assert getLocator() != null : "The Locator must first be started with a call to start!";
+
+ debug("Waiting on Locator (%1$s) to stop...", getId());
+
+ // prevent the JVM from exiting by joining the Locator Thread
+ getLocator().waitToStop();
+ }
+ catch (InterruptedException e) {
+ Thread.currentThread().interrupt();
+ t = e;
+ debug(e);
+ }
+ catch (RuntimeException e) {
+ t = e;
+ throw e;
+ }
+ catch (Throwable e) {
+ t = e;
+ throw e;
+ }
+ finally {
+ failOnStart(t);
+ }
+
+ return new LocatorState(this, Status.STOPPED);
+ }
+
+ /**
+ * Waits for a Locator status request response to be returned up to the specified timeout in the given unit of time.
+ * This call will send status requests at fixed intervals in the given unit of time until the timeout expires. If
+ * the request to determine the Locator's status is successful, then the Locator is considered to be 'ONLINE'.
+ * Otherwise, the Locator is considered to be unresponsive to the status request.
+ *
+ * However, this does not necessarily imply the Locator start was unsuccessful, only that a response was not received
+ * in the given time period.
+ *
+ * Note, this method does not block or cause the Locator's location-based services (daemon Threads) to continue
+ * running in anyway if the main application Thread terminates when running the Locator in-process. If the caller
+ * wishes to start a Locator in an asynchronous manner within the application process, then a call should be made to
+ * <code>waitOnLocator</code>.
+ *
+ * @param timeout a long value in time unit indicating when the period of time should expire in attempting
+ * to determine the Locator's status.
+ * @param interval a long value in time unit for how frequent the requests should be sent to the Locator.
+ * @param timeUnit the unit of time in which the timeout and interval are measured.
+ * @return the state of the Locator, which will either be 'ONLINE' or "NOT RESPONDING'. If the status returned is
+ * 'NOT RESPONDING', it just means the Locator did not respond to the status request within the given time period.
+ * It should not be taken as the Locator failed to start.
+ * @see #waitOnLocator()
+ */
+ public LocatorState waitOnStatusResponse(final long timeout, final long interval, final TimeUnit timeUnit) {
+ final long endTimeInMilliseconds = (System.currentTimeMillis() + timeUnit.toMillis(timeout));
+
+ while (System.currentTimeMillis() < endTimeInMilliseconds) {
+ try {
+ LocatorStatusResponse response = InternalLocator.statusLocator(getPort(), getBindAddress());
+ return new LocatorState(this, Status.ONLINE, response);
+ }
+ catch (Exception ignore) {
+ try {
+ synchronized (this) {
+ timeUnit.timedWait(this, interval);
+ }
+ }
+ catch (InterruptedException ignoreInterrupt) {
+ // NOTE just go and send another status request to the Locator...
+ }
+ }
+ }
+
+ // NOTE just because we were not able to communicate with the Locator in the given amount of time does not mean
+ // the Locator is having problems. The Locator could be slow in starting up and the timeout may not be
+ // long enough.
+ return new LocatorState(this, Status.NOT_RESPONDING);
+ }
+
+ /**
+ * Attempts to determine the state of the Locator. The Locator's status will be in only 1 of 2 possible states,
+ * either ONLINE or OFFLINE. This method behaves differently depending on which parameters were specified when
+ * the LocatorLauncher was constructed with an instance of Builder. If either the 'dir' or the 'pid' command-line
+ * option were specified, then an attempt is made to determine the Locator's status by using the dir or pid to
+ * correctly identify the Locator's MemberMXBean registered in the MBeanServer of the Locator's JVM, and invoking
+ * the 'status' operation. The same behavior occurs if the caller specified the Locator's GemFire member name or ID.
+ *
+ * However, if 'dir' or 'pid' were not specified, then determining the Locator's status defaults to using the
+ * configured bind address and port. If the bind address or port was not specified when using the Builder to
+ * construct a LocatorLauncher instance, then the defaults for both bind address and port are used. In either case,
+ * an actual TCP/IP request is made to the Locator's ServerSocket to ensure it is listening for client requests.
+ * This is true even when the LocatorLauncher is used in-process by calling the API.
+ *
+ * If the conditions above hold, then the Locator is deemed to be 'ONLINE', otherwise, the Locator is considered
+ * 'OFFLINE'.
+ *
+ * @return the Locator's state.
+ * @see #start()
+ * @see #stop()
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.Status
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.LocatorState
+ */
+ public LocatorState status() {
+ final LocatorLauncher launcher = getInstance();
+ // if this instance is starting then return local status
+ if (this.starting.get()) {
+ debug("Getting status from the LocatorLauncher instance that actually launched the GemFire Locator.%n");
+ return new LocatorState(this, Status.STARTING);
+ }
+ // if this instance is running then return local status
+ else if (isRunning()) {
+ debug("Getting Locator status using host (%1$s) and port (%2$s)%n", getBindAddressAsString(), getPortAsString());
+ return statusWithPort();
+ }
+ // if in-process do not use ProcessController
+ else if (isPidInProcess() && launcher != null) {
+ return launcher.statusInProcess();
+ }
+ // attempt to get status using pid if provided
+ else if (getPid() != null) {
+ debug("Getting Locator status using process ID (%1$s)%n", getPid());
+ return statusWithPid();
+ }
+ // attempt to get status using workingDirectory unless port was specified
+ else if (!(this.bindAddressSpecified || this.portSpecified)) {
+ debug("Getting Locator status using working directory (%1$s)%n", getWorkingDirectory());
+ return statusWithWorkingDirectory();
+ }
+ // attempt to get status using host and port (Note, bind address doubles as host when the launcher
+ // is used to get the Locator's status).
+ else {
+ debug("Getting Locator status using host (%1$s) and port (%2$s)%n", getBindAddressAsString(), getPortAsString());
+ return statusWithPort();
+ }
+ }
+
+ private LocatorState statusInProcess() {
+ if (this.starting.get()) {
+ debug("Getting status from the LocatorLauncher instance that actually launched the GemFire Locator.%n");
+ return new LocatorState(this, Status.STARTING);
+ }
+ else {
+ debug("Getting Locator status using host (%1$s) and port (%2$s)%n", getBindAddressAsString(), getPortAsString());
+ return statusWithPort();
+ }
+
+ }
+
+ private LocatorState statusWithPid() {
+ try {
+ final ProcessController controller = new ProcessControllerFactory().createProcessController(this.controllerParameters, getPid());
+ controller.checkPidSupport();
+ final String statusJson = controller.status();
+ return LocatorState.fromJson(statusJson);
+ }
+ catch (ConnectionFailedException e) {
+ // failed to attach to locator JVM
+ return createNoResponseState(e, "Failed to connect to locator with process id " + getPid());
+ }
+ catch (IOException e) {
+ // failed to open or read file or dir
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + getPid());
+ }
+ catch (MBeanInvocationFailedException e) {
+ // MBean either doesn't exist or method or attribute don't exist
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + getPid());
+ }
+ catch (UnableToControlProcessException e) {
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + getPid());
+ }
+ catch (InterruptedException e) {
+ Thread.currentThread().interrupt();
+ return createNoResponseState(e, "Interrupted while trying to communicate with locator with process id " + getPid());
+ }
+ catch (TimeoutException e) {
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + getPid());
+ }
+ }
+
+ private LocatorState statusWithPort() {
+ try {
+ LocatorStatusResponse response = InternalLocator.statusLocator(getPort(), getBindAddress());
+ return new LocatorState(this, Status.ONLINE, response);
+ }
+ catch (Exception e) {
+ return createNoResponseState(e, "Failed to connect to locator " + getId());
+ }
+ }
+
+ private LocatorState statusWithWorkingDirectory() {
+ int parsedPid = 0;
+ try {
+ final ProcessController controller = new ProcessControllerFactory().createProcessController(this.controllerParameters, new File(getWorkingDirectory()), ProcessType.LOCATOR.getPidFileName(), READ_PID_FILE_TIMEOUT_MILLIS, TimeUnit.MILLISECONDS);
+ parsedPid = controller.getProcessId();
+
+ // note: in-process request will go infinite loop unless we do the following
+ if (parsedPid == ProcessUtils.identifyPid()) {
+ LocatorLauncher runningLauncher = getInstance();
+ if (runningLauncher != null) {
+ return runningLauncher.status();
+ }
+ }
+
+ final String statusJson = controller.status();
+ return LocatorState.fromJson(statusJson);
+ }
+ catch (ConnectionFailedException e) {
+ // failed to attach to locator JVM
+ return createNoResponseState(e, "Failed to connect to locator with process id " + parsedPid);
+ }
+ catch (FileNotFoundException e) {
+ // could not find pid file
+ return createNoResponseState(e, "Failed to find process file " + ProcessType.LOCATOR.getPidFileName() + " in " + getWorkingDirectory());
+ }
+ catch (IOException e) {
+ // failed to open or read file or dir
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + parsedPid);
+ }
+ catch (MBeanInvocationFailedException e) {
+ // MBean either doesn't exist or method or attribute don't exist
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + parsedPid);
+ }
+ catch (PidUnavailableException e) {
+ // couldn't determine pid from within locator JVM
+ return createNoResponseState(e, "Failed to find usable process id within file " + ProcessType.LOCATOR.getPidFileName() + " in " + getWorkingDirectory());
+ }
+ catch (UnableToControlProcessException e) {
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + parsedPid);
+ }
+ catch (InterruptedException e) {
+ Thread.currentThread().interrupt();
+ return createNoResponseState(e, "Interrupted while trying to communicate with locator with process id " + parsedPid);
+ }
+ catch (TimeoutException e) {
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + parsedPid);
+ }
+ }
+
+ /**
+ * Determines whether the Locator can be stopped in-process, such as when a Locator is embedded in an application
+ * and the LocatorLauncher API is being used.
+ *
+ * @return a boolean indicating whether the Locator can be stopped in-process (the application's process with
+ * an embedded Locator).
+ */
+ protected boolean isStoppable() {
+ return (isRunning() && getLocator() != null);
+ }
+
+ /**
+ * Stop shuts the running Locator down. Using the API, the Locator is requested to stop by calling the Locator
+ * object's 'stop' method. Internally, this method is no different than using the LocatorLauncher class from the
+ * command-line or from within GemFire shell (Gfsh). In every single case, stop sends a TCP/IP 'shutdown' request
+ * on the configured address/port to which the Locator is bound and listening.
+ *
+ * If the "shutdown" request is successful, then the Locator will be 'STOPPED'. Otherwise, the Locator is considered
+ * 'OFFLINE' since the actual state cannot be fully assessed (as in the application process in which the Locator was
+ * hosted may still be running and the Locator object may still exist even though it is no longer responding to
+ * location-based requests). The later is particularly important in cases where the system resources (such as
+ * Sockets) may not have been cleaned up yet. Therefore, by returning a status of 'OFFLINE', the value is meant to
+ * reflect this in-deterministic state.
+ *
+ * @return a LocatorState indicating the state of the Locator after stop has been requested.
+ * @see #start()
+ * @see #status()
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.LocatorState
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.Status#NOT_RESPONDING
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.Status#STOPPED
+ */
+ public LocatorState stop() {
+ final LocatorLauncher launcher = getInstance();
+ // if this instance is running then stop it
+ if (isStoppable()) {
+ return stopInProcess();
+ }
+ // if in-process but difference instance of LocatorLauncher
+ else if (isPidInProcess() && launcher != null) {
+ return launcher.stopInProcess();
+ }
+ // attempt to stop Locator using pid...
+ else if (getPid() != null) {
+ return stopWithPid();
+ }
+ // attempt to stop Locator using the working directory...
+ //else if (this.workingDirectorySpecified) {
+ else if (getWorkingDirectory() != null) {
+ return stopWithWorkingDirectory();
+ }
+ else {
+ return new LocatorState(this, Status.NOT_RESPONDING);
+ }
+ }
+
+ private LocatorState stopInProcess() {
+ if (isStoppable()) {
+ this.locator.stop();
+ this.locator = null;
+ this.process.stop();
+ this.process = null;
+ INSTANCE.compareAndSet(this, null); // note: other thread may return Status.NOT_RESPONDING now
+ this.running.set(false);
+ return new LocatorState(this, Status.STOPPED);
+ } else {
+ return new LocatorState(this, Status.NOT_RESPONDING);
+ }
+ }
+
+ private LocatorState stopWithPid() {
+ try {
+ final ProcessController controller = new ProcessControllerFactory().createProcessController(new LocatorControllerParameters(), getPid());
+ controller.checkPidSupport();
+ controller.stop();
+ return new LocatorState(this, Status.STOPPED);
+ }
+ catch (ConnectionFailedException e) {
+ // failed to attach to locator JVM
+ return createNoResponseState(e, "Failed to connect to locator with process id " + getPid());
+ }
+ catch (IOException e) {
+ // failed to open or read file or dir
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + getPid());
+ }
+ catch (MBeanInvocationFailedException e) {
+ // MBean either doesn't exist or method or attribute don't exist
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + getPid());
+ }
+ catch (UnableToControlProcessException e) {
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + getPid());
+ }
+ }
+
+ @Deprecated
+ private LocatorState stopWithPort() {
+ try {
+ InternalLocator.stopLocator(getPort(), getBindAddress());
+ return new LocatorState(this, Status.STOPPED);
+ }
+ catch (ConnectException e) {
+ if (getBindAddress() == null) {
+ return createNoResponseState(e, "Failed to connect to locator on port " + getPort());
+ }
+ else {
+ return createNoResponseState(e, "Failed to connect to locator on " + getId());
+ }
+ }
+ }
+
+ private LocatorState stopWithWorkingDirectory() {
+ int parsedPid = 0;
+ try {
+ final ProcessController controller = new ProcessControllerFactory().createProcessController(this.controllerParameters, new File(getWorkingDirectory()), ProcessType.LOCATOR.getPidFileName(), READ_PID_FILE_TIMEOUT_MILLIS, TimeUnit.MILLISECONDS);
+ parsedPid = controller.getProcessId();
+
+ // NOTE in-process request will go infinite loop unless we do the following
+ if (parsedPid == ProcessUtils.identifyPid()) {
+ final LocatorLauncher runningLauncher = getInstance();
+ if (runningLauncher != null) {
+ return runningLauncher.stopInProcess();
+ }
+ }
+
+ controller.stop();
+ return new LocatorState(this, Status.STOPPED);
+ }
+ catch (ConnectionFailedException e) {
+ // failed to attach to locator JVM
+ return createNoResponseState(e, "Failed to connect to locator with process id " + parsedPid);
+ }
+ catch (FileNotFoundException e) {
+ // could not find pid file
+ return createNoResponseState(e, "Failed to find process file " + ProcessType.LOCATOR.getPidFileName() + " in " + getWorkingDirectory());
+ }
+ catch (IOException e) {
+ // failed to open or read file or dir
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + parsedPid);
+ }
+ catch (InterruptedException e) {
+ Thread.currentThread().interrupt();
+ return createNoResponseState(e, "Interrupted while trying to communicate with locator with process id " + parsedPid);
+ }
+ catch (MBeanInvocationFailedException e) {
+ // MBean either doesn't exist or method or attribute don't exist
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + parsedPid);
+ }
+ catch (PidUnavailableException e) {
+ // couldn't determine pid from within locator JVM
+ return createNoResponseState(e, "Failed to find usable process id within file " + ProcessType.LOCATOR.getPidFileName() + " in " + getWorkingDirectory());
+ }
+ catch (TimeoutException e) {
+ return createNoResponseState(e, "Timed out trying to find usable process id within file " + ProcessType.LOCATOR.getPidFileName() + " in " + getWorkingDirectory());
+ }
+ catch (UnableToControlProcessException e) {
+ return createNoResponseState(e, "Failed to communicate with locator with process id " + parsedPid);
+ }
+ }
+
+ private LocatorState createNoResponseState(final Exception cause, final String errorMessage) {
+ debug(cause);
+ //info(errorMessage);
+ return new LocatorState(this, Status.NOT_RESPONDING, errorMessage);
+ }
+
+ private Properties getOverriddenDefaults() {
+ Properties overriddenDefaults = new Properties();
+
+ overriddenDefaults.put(ProcessLauncherContext.OVERRIDDEN_DEFAULTS_PREFIX.concat(DistributionConfig.LOG_FILE_NAME),
+ getLogFileName());
+
+ for (String key : System.getProperties().stringPropertyNames()) {
+ if (key.startsWith(ProcessLauncherContext.OVERRIDDEN_DEFAULTS_PREFIX)) {
+ overriddenDefaults.put(key, System.getProperty(key));
+ }
+ }
+
+ return overriddenDefaults;
+ }
+
+ private class LocatorControllerParameters implements ProcessControllerParameters {
+ @Override
+ public File getPidFile() {
+ return getLocatorPidFile();
+ }
+
+ @Override
+ public File getWorkingDirectory() {
+ return new File(LocatorLauncher.this.getWorkingDirectory());
+ }
+
+ @Override
+ public int getProcessId() {
+ return getPid();
+ }
+
+ @Override
+ public ProcessType getProcessType() {
+ return ProcessType.LOCATOR;
+ }
+
+ @Override
+ public ObjectName getNamePattern() {
+ try {
+ return ObjectName.getInstance("GemFire:type=Member,*");
+ } catch (MalformedObjectNameException e) {
+ return null;
+ } catch (NullPointerException e) {
+ return null;
+ }
+ }
+
+ @Override
+ public String getPidAttribute() {
+ return "ProcessId";
+ }
+
+ @Override
+ public String getStopMethod() {
+ return "shutDownMember";
+ }
+
+ @Override
+ public String getStatusMethod() {
+ return "status";
+ }
+
+ @Override
+ public String[] getAttributes() {
+ return new String[] {"Locator", "Server"};
+ }
+
+ @Override
+ public Object[] getValues() {
+ return new Object[] {Boolean.TRUE, Boolean.FALSE};
+ }
+ }
+
+ /**
+ * Following the Builder design pattern, the LocatorLauncher Builder is used to configure and create a properly
+ * initialized instance of the LocatorLauncher class for running the Locator and performing other Locator
+ * operations.
+ */
+ public static class Builder {
+
+ protected static final Command DEFAULT_COMMAND = Command.UNSPECIFIED;
+
+ private Boolean debug;
+ private Boolean force;
+ private Boolean help;
+ private Boolean redirectOutput;
+ private Boolean loadSharedConfigFromDir;
+ private Command command;
+
+ private InetAddress bindAddress;
+
+ private Integer pid;
+ private Integer port;
+
+ private final Properties distributedSystemProperties = new Properties();
+
+ private String hostnameForClients;
+ private String memberName;
+ private String workingDirectory;
+
+ /**
+ * Default constructor used to create an instance of the Builder class for programmatical access.
+ */
+ public Builder() {
+ }
+
+ /**
+ * Constructor used to create and configure an instance of the Builder class with the specified arguments, often
+ * passed from the command-line when launching an instance of this class from the command-line using the Java
+ * launcher.
+ *
+ * @param args the array of arguments used to configure the Builder.
+ */
+ public Builder(final String... args) {
+ parseArguments(args != null ? args : new String[0]);
+ }
+
+ /**
+ * Gets an instance of the JOpt Simple OptionParser to parse the command-line arguments.
+ *
+ * @return an instance of the JOpt Simple OptionParser configured with the command-line options used by the Locator.
+ */
+ private OptionParser getParser() {
+ final OptionParser parser = new OptionParser(true);
+
+ parser.accepts("bind-address").withRequiredArg().ofType(String.class);
+ parser.accepts("debug");
+ parser.accepts("dir").withRequiredArg().ofType(String.class);
+ parser.accepts("force");
+ parser.accepts("help");
+ parser.accepts("hostname-for-clients").withRequiredArg().ofType(String.class);
+ parser.accepts("pid").withRequiredArg().ofType(Integer.class);
+ parser.accepts("port").withRequiredArg().ofType(Integer.class);
+ parser.accepts("redirect-output");
+ parser.accepts("version");
+
+ return parser;
+ }
+
+ /**
+ * Parses an array of arguments to configure this Builder with the intent of constructing a Locator launcher to
+ * invoke a Locator. This method is called to parse the arguments specified by the user on the command-line.
+ *
+ * @param args the array of arguments used to configure this Builder and create an instance of LocatorLauncher.
+ */
+ protected void parseArguments(final String... args) {
+ try {
+ parseCommand(args);
+ parseMemberName(args);
+
+ final OptionSet options = getParser().parse(args);
+
+ setDebug(options.has("debug"));
+ setForce(options.has("force"));
+ setHelp(options.has("help"));
+ setRedirectOutput(options.has("redirect-output"));
+
+ if (!isHelping()) {
+ if (options.has("bind-address")) {
+ setBindAddress(ObjectUtils.toString(options.valueOf("bind-address")));
+ }
+
+ if (options.has("dir")) {
+ setWorkingDirectory(ObjectUtils.toString(options.valueOf("dir")));
+ }
+
+ if (options.has("hostname-for-clients")) {
+ setHostnameForClients(ObjectUtils.toString(options.valueOf("hostname-for-clients")));
+ }
+
+ if (options.has("pid")) {
+ setPid((Integer) options.valueOf("pid"));
+ }
+
+ if (options.has("port")) {
+ setPort((Integer) options.valueOf("port"));
+ }
+
+ if (options.has("version")) {
+ setCommand(Command.VERSION);
+ }
+ }
+ }
+ catch (OptionException e) {
+ throw new IllegalArgumentException(LocalizedStrings.Launcher_Builder_PARSE_COMMAND_LINE_ARGUMENT_ERROR_MESSAGE
+ .toLocalizedString("Locator", e.getMessage()), e);
+ }
+ catch (Exception e) {
+ throw new RuntimeException(e.getMessage(), e);
+ }
+ }
+
+ /**
+ * Iterates the list of arguments in search of the target Locator launcher command.
+ *
+ * @param args an array of arguments from which to search for the Locator launcher command.
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Command#valueOfName(String)
+ * @see #parseArguments(String...)
+ */
+ protected void parseCommand(final String... args) {
+ // search the list of arguments for the command; technically, the command should be the first argument in the
+ // list, but does it really matter? stop after we find one valid command.
+ for (String arg : args) {
+ final Command command = Command.valueOfName(arg);
+ if (command != null) {
+ setCommand(command);
+ break;
+ }
+ }
+ }
+
+ /**
+ * Iterates the list of arguments in search of the Locator's GemFire member name. If the argument does not
+ * start with '-' or is not the name of a Locator launcher command, then the value is presumed to be the member name
+ * for the Locator in GemFire.
+ *
+ * @param args the array of arguments from which to search for the Locator's member name in GemFire.
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Command#isCommand(String)
+ * @see #parseArguments(String...)
+ */
+ protected void parseMemberName(final String[] args) {
+ for (String arg : args) {
+ if (!(arg.startsWith(OPTION_PREFIX) || Command.isCommand(arg))) {
+ setMemberName(arg);
+ break;
+ }
+ }
+ }
+
+ /**
+ * Gets the Locator launcher command used during the invocation of the LocatorLauncher.
+ *
+ * @return the Locator launcher command used to invoke (run) the LocatorLauncher class.
+ * @see #setCommand(com.gemstone.gemfire.distributed.LocatorLauncher.Command)
+ * @see LocatorLauncher.Command
+ */
+ public Command getCommand() {
+ return ObjectUtils.defaultIfNull(this.command, DEFAULT_COMMAND);
+ }
+
+ /**
+ * Sets the Locator launcher command used during the invocation of the LocatorLauncher
+ *
+ * @param command the targeted Locator launcher command used during the invocation (run) of LocatorLauncher.
+ * @return this Builder instance.
+ * @see #getCommand()
+ * @see LocatorLauncher.Command
+ */
+ public Builder setCommand(final Command command) {
+ this.command = command;
+ return this;
+ }
+
+ /**
+ * Determines whether the new instance of the LocatorLauncher will be set to debug mode.
+ *
+ * @return a boolean value indicating whether debug mode is enabled or disabled.
+ * @see #setDebug(Boolean)
+ */
+ public Boolean getDebug() {
+ return this.debug;
+ }
+
+ /**
+ * Sets whether the new instance of the LocatorLauncher will be set to debug mode.
+ *
+ * @param debug a boolean value indicating whether debug mode is to be enabled or disabled.
+ * @return this Builder instance.
+ * @see #getHelp()
+ */
+ public Builder setDebug(final Boolean debug) {
+ this.debug = debug;
+ return this;
+ }
+
+ /**
+ * Gets the GemFire Distributed System (cluster) Properties configuration.
+ *
+ * @return a Properties object containing configuration settings for the GemFire Distributed System (cluster).
+ * @see java.util.Properties
+ */
+ public Properties getDistributedSystemProperties() {
+ return this.distributedSystemProperties;
+ }
+
+ /**
+ * Gets the boolean value used by the Locator to determine if it should overwrite the PID file if it already exists.
+ *
+ * @return the boolean value specifying whether or not to overwrite the PID file if it already exists.
+ * @see com.gemstone.gemfire.internal.process.LocalProcessLauncher
+ * @see #setForce(Boolean)
+ */
+ public Boolean getForce() {
+ return ObjectUtils.defaultIfNull(this.force, DEFAULT_FORCE);
+ }
+
+ /**
+ * Sets the boolean value used by the Locator to determine if it should overwrite the PID file if it already exists.
+ *
+ * @param force a boolean value indicating whether to overwrite the PID file when it already exists.
+ * @return this Builder instance.
+ * @see com.gemstone.gemfire.internal.process.LocalProcessLauncher
+ * @see #getForce()
+ */
+ public Builder setForce(final Boolean force) {
+ this.force = force;
+ return this;
+ }
+
+
+ /**
+ * Determines whether the new instance of LocatorLauncher will be used to output help information for either
+ * a specific command, or for using LocatorLauncher in general.
+ *
+ * @return a boolean value indicating whether help will be output during the invocation of LocatorLauncher.
+ * @see #setHelp(Boolean)
+ */
+ public Boolean getHelp() {
+ return this.help;
+ }
+
+ /**
+ * Determines whether help has been enabled.
+ *
+ * @return a boolean indicating if help was enabled.
+ */
+ private boolean isHelping() {
+ return Boolean.TRUE.equals(getHelp());
+ }
+
+ /**
+ * Sets whether the new instance of LocatorLauncher will be used to output help information for either a specific
+ * command, or for using LocatorLauncher in general.
+ *
+ * @param help a boolean indicating whether help information is to be displayed during invocation of LocatorLauncher.
+ * @return this Builder instance.
+ * @see #getHelp()
+ */
+ public Builder setHelp(final Boolean help) {
+ this.help = help;
+ return this;
+ }
+
+ final boolean isBindAddressSpecified() {
+ return (getBindAddress() != null);
+
+ }
+ /**
+ * Gets the IP address to which the Locator has bound itself listening for client requests.
+ *
+ * @return an InetAddress with the IP address or hostname on which the Locator is bound and listening.
+ * @see #setBindAddress(String)
+ * @see java.net.InetAddress
+ */
+ public InetAddress getBindAddress() {
+ return this.bindAddress;
+ }
+
+ /**
+ * Sets the IP address as an java.net.InetAddress to which the Locator has bound itself listening for client
+ * requests.
+ *
+ * @param bindAddress the InetAddress with the IP address or hostname on which the Locator is bound and listening.
+ * @return this Builder instance.
+ * @throws IllegalArgumentException wrapping the UnknownHostException if the IP address or hostname for the
+ * bind address is unknown.
+ * @see #getBindAddress()
+ * @see java.net.InetAddress
+ */
+ public Builder setBindAddress(final String bindAddress) {
+ if (StringUtils.isBlank(bindAddress)) {
+ this.bindAddress = null;
+ return this;
+ }
+ else {
+ try {
+ this.bindAddress = InetAddress.getByName(bindAddress);
- return this;
++ if (SocketCreator.isLocalHost(this.bindAddress)) {
++ return this;
++ }
++ else {
++ throw new IllegalArgumentException(bindAddress + " is not an address for this machine.");
++ }
+ }
+ catch (UnknownHostException e) {
+ throw new IllegalArgumentException(LocalizedStrings.Launcher_Builder_UNKNOWN_HOST_ERROR_MESSAGE
+ .toLocalizedString("Locator"), e);
+ }
+ }
+ }
+
+ /**
+ * Gets the hostname used by clients to lookup the Locator.
+ *
+ * @return a String indicating the hostname Locator binding used in client lookups.
+ * @see #setHostnameForClients(String)
+ */
+ public String getHostnameForClients() {
+ return this.hostnameForClients;
+ }
+
+ /**
+ * Sets the hostname used by clients to lookup the Locator.
+ *
+ * @param hostnameForClients a String indicating the hostname Locator binding used in client lookups.
+ * @return this Builder instance.
+ * @throws IllegalArgumentException if the hostname was not specified (is blank or empty), such as when the
+ * --hostname-for-clients command-line option may have been specified without any argument.
+ * @see #getHostnameForClients()
+ */
+ public Builder setHostnameForClients(final String hostnameForClients) {
+ if (StringUtils.isEmpty(StringUtils.trim(hostnameForClients))) {
+ throw new IllegalArgumentException(
+ LocalizedStrings.LocatorLauncher_Builder_INVALID_HOSTNAME_FOR_CLIENTS_ERROR_MESSAGE.toLocalizedString());
+ }
+ this.hostnameForClients = hostnameForClients;
+ return this;
+ }
+
+ /**
+ * Gets the member name of this Locator in GemFire.
+ *
+ * @return a String indicating the member name of this Locator in GemFire.
+ * @see #setMemberName(String)
+ */
+ public String getMemberName() {
+ return this.memberName;
+ }
+
+ /**
+ * Sets the member name of the Locator in GemFire.
+ *
+ * @param memberName a String indicating the member name of this Locator in GemFire.
+ * @return this Builder instance.
+ * @throws IllegalArgumentException if the member name is invalid.
+ * @see #getMemberName()
+ */
+ public Builder setMemberName(final String memberName) {
+ if (StringUtils.isEmpty(StringUtils.trim(memberName))) {
+ throw new IllegalArgumentException(LocalizedStrings.Launcher_Builder_MEMBER_NAME_ERROR_MESSAGE
+ .toLocalizedString("Locator"));
+ }
+ this.memberName = memberName;
+ return this;
+ }
+
+ /**
+ * Gets the process ID (PID) of the running Locator indicated by the user as an argument to the LocatorLauncher.
+ * This PID is used by the Locator launcher to determine the Locator's status, or invoke shutdown on the Locator.
+ *
+ * @return a user specified Integer value indicating the process ID of the running Locator.
+ * @see #setPid(Integer)
+ */
+ public Integer getPid() {
+ return this.pid;
+ }
+
+ /**
+ * Sets the process ID (PID) of the running Locator indicated by the user as an argument to the LocatorLauncher.
+ * This PID will be used by the Locator launcher to determine the Locator's status, or invoke shutdown on
+ * the Locator.
+ *
+ * @param pid a user specified Integer value indicating the process ID of the running Locator.
+ * @return this Builder instance.
+ * @throws IllegalArgumentException if the process ID (PID) is not valid (greater than zero if not null).
+ * @see #getPid()
+ */
+ public Builder setPid(final Integer pid) {
+ if (pid != null && pid < 0) {
+ throw new IllegalArgumentException(LocalizedStrings.Launcher_Builder_PID_ERROR_MESSAGE.toLocalizedString());
+ }
+ this.pid = pid;
+ return this;
+ }
+
+ boolean isPortSpecified() {
+ return (this.port != null);
+ }
+
+ /**
+ * Gets the port number used by the Locator to listen for client requests. If the port was not specified, then the
+ * default Locator port (10334) is returned.
+ *
+ * @return the specified Locator port or the default port if unspecified.
+ * @see #setPort(Integer)
+ */
+ public Integer getPort() {
+ return ObjectUtils.defaultIfNull(port, getDefaultLocatorPort());
+ }
+
+ /**
+ * Sets the port number used by the Locator to listen for client requests. The port number must be between 1 and
+ * 65535 inclusive.
+ *
+ * @param port an Integer value indicating the port used by the Locator to listen for client requests.
+ * @return this Builder instance.
+ * @throws IllegalArgumentException if the port number is not valid.
+ * @see #getPort()
+ */
+ public Builder setPort(final Integer port) {
+ // NOTE if the user were to specify a port number of 0, then java.net.ServerSocket will pick an ephemeral port
+ // to bind the socket, which we do not want.
+ if (port != null && (port < 0 || port > 65535)) {
+ throw new IllegalArgumentException(LocalizedStrings.Launcher_Builder_INVALID_PORT_ERROR_MESSAGE
+ .toLocalizedString("Locator"));
+ }
+ this.port = port;
+ return this;
+ }
+
+ /**
+ * Determines whether the new instance of LocatorLauncher will redirect
+ * output to system logs when starting a Locator.
+ *
+ * @return a boolean value indicating if output will be redirected to system
+ * logs when starting a Locator
+ *
+ * @see #setRedirectOutput(Boolean)
+ */
+ public Boolean getRedirectOutput() {
+ return this.redirectOutput;
+ }
+
+ /**
+ * Determines whether redirecting of output has been enabled.
+ *
+ * @return a boolean indicating if redirecting of output was enabled.
+ */
+ private boolean isRedirectingOutput() {
+ return Boolean.TRUE.equals(getRedirectOutput());
+ }
+
+ /**
+ * Sets whether the new instance of LocatorLauncher will redirect output to system logs when starting a Locator.
+ *
+ * @param redirectOutput a boolean value indicating if output will be redirected to system logs when starting
+ * a Locator.
+ * @return this Builder instance.
+ * @see #getRedirectOutput()
+ */
+ public Builder setRedirectOutput(final Boolean redirectOutput) {
+ this.redirectOutput = redirectOutput;
+ return this;
+ }
+
+ boolean isWorkingDirectorySpecified() {
+ return !StringUtils.isBlank(this.workingDirectory);
+ }
+
+ /**
+ * Gets the working directory pathname in which the Locator will be ran. If the directory is unspecified,
+ * then working directory defaults to the current directory.
+ *
+ * @return a String indicating the working directory pathname.
+ * @see #setWorkingDirectory(String)
+ */
+ public String getWorkingDirectory() {
+ return IOUtils.tryGetCanonicalPathElseGetAbsolutePath(
+ new File(StringUtils.defaultIfBlank(this.workingDirectory, DEFAULT_WORKING_DIRECTORY)));
+ }
+
+ /**
+ * Sets the working directory in which the Locator will be ran. This also the directory in which all Locator
+ * files (such as log and license files) will be written. If the directory is unspecified, then the working
+ * directory defaults to the current directory.
+ *
+ * @param workingDirectory a String indicating the pathname of the directory in which the Locator will be ran.
+ * @return this Builder instance.
+ * @throws IllegalArgumentException wrapping a FileNotFoundException if the working directory pathname cannot be
+ * found.
+ * @see #getWorkingDirectory()
+ * @see java.io.FileNotFoundException
+ */
+ public Builder setWorkingDirectory(final String workingDirectory) {
+ if (!new File(StringUtils.defaultIfBlank(workingDirectory, DEFAULT_WORKING_DIRECTORY)).isDirectory()) {
+ throw new IllegalArgumentException(
+ LocalizedStrings.Launcher_Builder_WORKING_DIRECTORY_NOT_FOUND_ERROR_MESSAGE.toLocalizedString("Locator"),
+ new FileNotFoundException(workingDirectory));
+ }
+ this.workingDirectory = workingDirectory;
+ return this;
+ }
+
+ /**
+ * Sets a GemFire Distributed System Property.
+ *
+ * @param propertyName a String indicating the name of the GemFire Distributed System property.
+ * @param propertyValue a String value for the GemFire Distributed System property.
+ * @return this Builder instance.
+ */
+ public Builder set(final String propertyName, final String propertyValue) {
+ this.distributedSystemProperties.setProperty(propertyName, propertyValue);
+ return this;
+ }
+
+ /**
+ * Validates the configuration settings and properties of this Builder, ensuring that all invariants have been met.
+ * Currently, the only invariant constraining the Builder is that the user must specify the member name for the
+ * Locator in the GemFire distributed system as a command-line argument, or by setting the memberName property
+ * programmatically using the corresponding setter method. If the member name is not given, then the user must
+ * have specified the pathname to the gemfire.properties file before validate is called. It is then assumed,
+ * but not further validated, that the user has specified the Locator's member name in the properties file.
+ *
+ * @throws IllegalStateException if the Builder is not properly configured.
+ */
+ protected void validate() {
+ if (!isHelping()) {
+ validateOnStart();
+ validateOnStatus();
+ validateOnStop();
+ // no validation for 'version' required
+ }
+ }
+
+ /**
+ * Validates the arguments passed to the Builder when the 'start' command has been issued.
+ *
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Command#START
+ */
+ protected void validateOnStart() {
+ if (Command.START.equals(getCommand())) {
+ if (StringUtils.isBlank(getMemberName())
+ && !isSet(System.getProperties(), DistributionConfig.GEMFIRE_PREFIX + DistributionConfig.NAME_NAME)
+ && !isSet(getDistributedSystemProperties(), DistributionConfig.NAME_NAME)
+ && !isSet(loadGemFireProperties(DistributedSystem.getPropertyFileURL()), DistributionConfig.NAME_NAME))
+ {
+ throw new IllegalStateException(LocalizedStrings.Launcher_Builder_MEMBER_NAME_VALIDATION_ERROR_MESSAGE
+ .toLocalizedString("Locator"));
+ }
+
+ if (!SystemUtils.CURRENT_DIRECTORY.equals(getWorkingDirectory())) {
+ throw new IllegalStateException(LocalizedStrings.Launcher_Builder_WORKING_DIRECTORY_OPTION_NOT_VALID_ERROR_MESSAGE
+ .toLocalizedString("Locator"));
+ }
+ }
+ }
+
+ /**
+ * Validates the arguments passed to the Builder when the 'status' command has been issued.
+ *
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Command#STATUS
+ */
+ protected void validateOnStatus() {
+ if (Command.STATUS.equals(getCommand())) {
+ }
+ }
+
+ /**
+ * Validates the arguments passed to the Builder when the 'stop' command has been issued.
+ *
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher.Command#STOP
+ */
+ protected void validateOnStop() {
+ if (Command.STOP.equals(getCommand())) {
+ }
+ }
+
+ /**
+ * Validates the Builder configuration settings and then constructs an instance of the LocatorLauncher class
+ * to invoke operations on a GemFire Locator.
+ *
+ * @return a newly constructed instance of LocatorLauncher configured with this Builder.
+ * @see #validate()
+ * @see com.gemstone.gemfire.distributed.LocatorLauncher
+ */
+ public LocatorLauncher build() {
+ validate();
+ return new LocatorLauncher(this);
+ }
+ }
+
+ /**
+ * An enumerated type representing valid commands to the Locator launcher.
+ */
+ public static enum Command {
+ START("start", "bind-address", "hostname-for-clients", "port", "force", "debug", "help"),
+ STATUS("status", "bind-address", "port", "member", "pid", "dir", "debug", "help"),
+ STOP("stop", "member", "pid", "dir", "debug", "help"),
+ VERSION("version"),
+ UNSPECIFIED("unspecified");
+
+ private final List<String> options;
+
+ private final String name;
+
+ Command(final String name, final String... options) {
+ assert !StringUtils.isBlank(name) : "The name of the locator launcher command must be specified!";
+ this.name = name;
+ this.options = (options != null ? Collections.unmodifiableList(Arrays.asList(options))
+ : Collections.<String>emptyList());
+ }
+
+ /**
+ * Determines whether the specified name refers to a valid Locator launcher command, as defined by this
+ * enumerated type.
+ *
+ * @param name a String value indicating the potential name of a Locator launcher command.
+ * @return a boolean indicating whether the specified name for a Locator launcher command is valid.
+ */
+ public static boolean isCommand(final String name) {
+ return (valueOfName(name) != null);
+ }
+
+ /**
+ * Determines whether the given Locator launcher command has been properly specified. The command is deemed
+ * unspecified if the reference is null or the Command is UNSPECIFIED.
+ *
+ * @param command the Locator launcher command.
+ * @return a boolean value indicating whether the Locator launcher command is unspecified.
+ * @see Command#UNSPECIFIED
+ */
+ public static boolean isUnspecified(final Command command) {
+ return (command == null || command.isUnspecified());
+ }
+
+ /**
+ * Looks up a Locator launcher command by name. The equality comparison on name is case-insensitive.
+ *
+ * @param name a String value indicating the name of the Locator launcher command.
+ * @return an enumerated type representing the command name or null if the no such command with the specified name
+ * exists.
+ */
+ public static Command valueOfName(final String name) {
+ for (Command command : values()) {
+ if (command.getName().equalsIgnoreCase(name)) {
+ return command;
+ }
+ }
+
+ return null;
+ }
+
+ /**
+ * Gets the name of the Locator launcher command.
+ *
+ * @return a String value indicating the name of the Locator launcher command.
+ */
+ public String getName() {
+ return this.name;
+ }
+
+ /**
+ * Gets a set of valid options that can be used with the Locator launcher command when used from the command-line.
+ *
+ * @return a Set of Strings indicating the names of the options available to the Locator launcher command.
+ */
+ public List<String> getOptions() {
+ return this.options;
+ }
+
+ /**
+ * Determines whether this Locator launcher command has the specified command-line option.
+ *
+ * @param option a String indicating the name of the command-line option to this command.
+ * @return a boolean value indicating whether this command has the specified named command-line option.
+ */
+ public boolean hasOption(final String option) {
+ return getOptions().contains(StringUtils.toLowerCase(option));
+ }
+
+ /**
+ * Convenience method for determining whether this is the UNSPECIFIED Locator launcher command.
+ *
+ * @return a boolean indicating if this command is UNSPECIFIED.
+ * @see #UNSPECIFIED
+ */
+ public boolean isUnspecified() {
+ return UNSPECIFIED.equals(this);
+ }
+
+ /**
+ * Gets the String representation of this Locator launcher command.
+ *
+ * @return a String value representing this Locator launcher command.
+ */
+ @Override
+ public String toString() {
+ return getName();
+ }
+ }
+
+ /**
+ * The LocatorState is an immutable type representing the state of the specified Locator at any given moment in time.
+ * The state of the Locator is assessed at the exact moment an instance of this class is constructed.
+ *
+ * @see com.gemstone.gemfire.distributed.AbstractLauncher.ServiceState
+ */
+ public static final class LocatorState extends ServiceState<String> {
+
+ /**
+ * Unmarshals a LocatorState instance from the JSON String.
+ *
+ * @return a LocatorState value unmarshalled from the JSON String.
+ */
+ public static LocatorState fromJson(final String json) {
+ try {
+ final GfJsonObject gfJsonObject = new GfJsonObject(json);
+
+ final Status status = Status.valueOfDescription(gfJsonObject.getString(JSON_STATUS));
+
+ final List<String> jvmArguments = Arrays.asList(GfJsonArray.toStringArray(
+ gfJsonObject.getJSONArray(JSON_JVMARGUMENTS)));
+
+ return new LocatorState(status,
+ gfJsonObject.getString(JSON_STATUSMESSAGE),
+ gfJsonObject.getLong(JSON_TIMESTAMP),
+ gfJsonObject.getString(JSON_LOCATION),
+ gfJsonObject.getInt(JSON_PID),
+ gfJsonObject.getLong(JSON_UPTIME),
+ gfJsonObject.getString(JSON_WORKINGDIRECTORY),
+ jvmArguments,
+ gfJsonObject.getString(JSON_CLASSPATH),
+ gfJsonObject.getString(JSON_GEMFIREVERSION),
+ gfJsonObject.getString(JSON_JAVAVERSION),
+ gfJsonObject.getString(JSON_LOGFILE),
+ gfJsonObject.getString(JSON_HOST),
+ gfJsonObject.getString(JSON_PORT),
+ gfJsonObject.getString(JSON_MEMBERNAME));
+ }
+ catch (GfJsonException e) {
+ throw new IllegalArgumentException("Unable to create LocatorStatus from JSON: ".concat(json), e);
+ }
+ }
+
+ public LocatorState(final LocatorLauncher launcher, final Status status) {
+ // if status is NOT_RESPONDING then this is executing inside the JVM asking for he status; pid etc will be set according to the caller's JVM instead
+ this(status,
+ launcher.statusMessage,
+ System.currentTimeMillis(),
+ launcher.getId(),
+ identifyPid(),
+ ManagementFactory.getRuntimeMXBean().getUptime(),
+ launcher.getWorkingDirectory(),
+ ManagementFactory.getRuntimeMXBean().getInputArguments(),
+ System.getProperty("java.class.path"),
+ GemFireVersion.getGemFireVersion(),
+ System.getProperty("java.version"),
+ getLogFileCanonicalPath(launcher),
+ launcher.getBindAddressAsString(),
+ launcher.getPortAsString(),
+ launcher.getMemberName());
+ }
+
+ public LocatorState(final LocatorLauncher launcher, final Status status, final String errorMessage) {
+ this(status, // status
+ errorMessage, // statusMessage
+ System.currentTimeMillis(), // timestamp
+ null, // locatorLocation
+ null, // pid
+ 0L, // uptime
+ launcher.getWorkingDirectory(), // workingDirectory
+ Collections.<String>emptyList(), // jvmArguments
+ null, // classpath
+ GemFireVersion.getGemFireVersion(), // gemfireVersion
+ null, // javaVersion
+ null, // logFile
+ null, // host
+ null, // port
+ null);// memberName
+ }
+
+ private static String getBindAddressAsString(LocatorLauncher launcher) {
+ if (InternalLocator.hasLocator()) {
+ final InternalLocator locator = InternalLocator.getLocator();
+ final InetAddress bindAddress = locator.getBindAddress();
+ if (bindAddress != null) {
+ if (StringUtils.isBlank(bindAddress.getHostAddress())) {
+ return bindAddress.getHostAddress();
+ }
+ }
+ }
+ return launcher.getBindAddressAsString();
+ }
+
+ private static String getLogFileCanonicalPath(LocatorLauncher launcher) {
+ if (InternalLocator.hasLocator()) {
+ final InternalLocator locator = InternalLocator.getLocator();
+ final File logFile = locator.getLogFile();
+
+ if (logFile != null && logFile.isFile()) {
+ final String logFileCanonicalPath = IOUtils.tryGetCanonicalPathElseGetAbsolutePath(logFile);
+ if (!StringUtils.isBlank(logFileCanonicalPath)) { // this is probably not need but a safe check none-the-less.
+ return logFileCanonicalPath;
+ }
+ }
+ }
+ return launcher.getLogFileCanonicalPath();
+ }
+
+ private static String getPortAsString(LocatorLauncher launcher) {
+ if (InternalLocator.hasLocator()) {
+ final InternalLocator locator = InternalLocator.getLocator();
+ final String portAsString = String.valueOf(locator.getPort());
+ if (!StringUtils.isBlank(portAsString)) {
+ return portAsString;
+ }
+ }
+ return launcher.getPortAsString();
+ }
+
+ protected LocatorState(final Status status,
+ final String statusMessage,
+ final long timestamp,
+ final String locatorLocation,
+ final Integer pid,
+ final Long uptime,
+ final String workingDirectory,
+ final List<String> jvmArguments,
+ final String classpath,
+ final String gemfireVersion,
+ final String javaVersion,
+ final String logFile,
+ final String host,
+ final String port,
+ final String memberName)
+ {
+ super(status, statusMessage, timestamp, locatorLocation, pid, uptime, workingDirectory, jvmArguments, classpath,
+ gemfireVersion, javaVersion, logFile, host, port, memberName);
+ }
+
+ private LocatorState(final LocatorLauncher launcher, final Status status, final LocatorStatusResponse response) {
+ this(status,
+ launcher.statusMessage,
+ System.currentTimeMillis(),
+ launcher.getId(),
+ response.getPid(),
+ response.getUptime(),
+ response.getWorkingDirectory(),
+ response.getJvmArgs(),
+ response.getClasspath(),
+ response.getGemFireVersion(),
+ response.getJavaVersion(),
+ response.getLogFile(),
+ response.getHost(),
+ String.valueOf(response.getPort()),
+ response.getName());
+ }
+
+ @Override
+ protected String getServiceName() {
+ return LOCATOR_SERVICE_NAME;
+ }
+ }
+
+}