You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Andrija Panic <an...@gmail.com> on 2018/10/24 12:06:34 UTC
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
I assume a bit late (just a few months :) - but for sake of other list
members - had exactly the same case, because of FIREWALL on CentOS 7
- dashboard shows ZERO capacity, since SSVM is NOT functional - because
agent inside SSVM could not connect to Management Server - because of
FIREWALL...
- running ssvm.sh script reported BAD IP address of the Secondary Storage
inside VM - so make sure the agent is CONNECTED when viewing SSVM and CPVM
from Infrastructure --> System VMs...
- also CPVM was not working - again, because agent was not connected to
mgmt server..
Firewall can be properly fixed/configured (obviously), or you can try temp
workaround:
systemctl disable firewalld
systemctl stop firewalld
After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and wait
for SSVM and CPVM to be created and that agent connects (Agent State shows
UP in GUI)
Cheers
Andrija
On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <Da...@shapeblue.com>
wrote:
> Hi Olivier,
>
> Can you write to the NFS mount from SSVM? It could be you have it mounted
> OK, but ACLs and/or settings prevent you from actually reading/writing.
>
> Also keep in mind the NFS permissions you need to set
> (rw,async,no_root_squash,no_subtree_check) – some pointers on
> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
>
> Regards,
> Dag Sonstebo
> Cloud Architect
> ShapeBlue
>
> On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com> wrote:
>
> Hi,
>
> I've a problem with secondary storage, in the dashboard it is 0.00KB .
>
> In the ssvm, when I launch ssvm.check : This no nfs mount directory !
>
> root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
> ================================================
> First DNS server is 200.13.136.8
> PING 200.13.136.8 (200.13.136.8): 56 data bytes
> 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
> 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
> --- 200.13.136.8 ping statistics ---
> 2 packets transmitted, 2 packets received, 0% packet loss
> round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
> Good: Can ping DNS server
> ================================================
> Good: DNS resolves cloudstack.apache.org
> ================================================
> nfs is currently mounted
> ================================================
> Management server is 172.16.1.5. Checking connectivity.
> ./ssvm-check.sh: line 121: warning: command substitution: ignored null
> byte in input
> Good: Can connect to management server port 8250
> ================================================
> Good: Java process is running
> ================================================
> Tests Complete. Look for ERROR or WARNING above.
>
> Can you help me to verify ssvm (Apache CloudStack SystemVM 4.11.0):
>
> eth0 => cloud_link_local_network : 169.254.0.123
> eth1 => net-mgmt (managment) : IP OK ping server managment
> eth2 => net-public : IP public : ping 8.8.8.8 and ping www.google.com
> eth3 => net-storage : IP storage : ping nfs server
>
> My log :
>
> 2018-03-23 13:22:26,166 WARN [c.c.a.d.ParamGenericValidationWorker]
> (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b) Received
> unknown parameters for command listSystemVms. Unknown parameters :
> listall
> 2018-03-23 13:22:31,740 WARN [c.c.a.d.ParamGenericValidationWorker]
> (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
> Received
> unknown parameters for command listHosts. Unknown parameters : listall
> 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
> (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
> complete the ping task
>
> I don't undestand ...
>
> I use http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
> (yum.repos.d)
>
> I use this script to install, reinstall etc .... :-)
>
> #!/bin/sh
> clear
> yum clean all
> yum update -y
> yum install cloudstack-management cloudstack-usage -y
> cd /opt/
> wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
> mv vhd-util
> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
> chmod +x
> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
> cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
> --deploy-as=root:Xxxxxxxxxxx
> cloudstack-setup-management
> rmdir /tmp/secondary
> mkdir /tmp/secondary
> mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
>
> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
>
> -m /tmp/secondary -u
>
> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
> -h xenserver
> umount /tmp/secondary/
> rmdir /tmp/secondary/
> tail -f /var/log/cloudstack/management/management-server.log
>
> Thank's a lot
>
> Olivier
>
>
>
>
> Dag.Sonstebo@shapeblue.com
> www.shapeblue.com
> 53 Chandos Place, Covent Garden, London WC2N 4HSUK
> @shapeblue
>
>
>
>
--
Andrija Panić
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
Posted by Jordan Michaels <mi...@viviotech.net>.
It's all good! I sincerely appreciate any advice you send my way even if it's rushed. ;)
Thank you.
--
Kind regards,
Jordan Michaels
Vivio Technologies
----- Original Message -----
From: "Andrija Panic" <an...@gmail.com>
To: "jordan" <jo...@viviotech.net>
Cc: "users" <us...@cloudstack.apache.org>
Sent: Thursday, 25 October, 2018 15:13:47
Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE 0.00KB (URGENT)
Well, my apologies also - I see now that the original thread stated a
normally working SSVM... Seems I was rushing with my answer :)
On Thu, 25 Oct 2018 at 23:48, Jordan Michaels <mi...@viviotech.net> wrote:
> Hi Andrija,
>
> Maybe my issue is different then. I apologize, as I didn't mean to hijack
> this thread. It just sounded very similar to the issue I am experiencing.
>
> In my case, the SSVM's are never created, because the system seems to not
> be able to find the storage. I'll keep working on it.
>
> Thank you!
>
> --
> Kind regards,
> Jordan Michaels
> Vivio Technologies
>
> ----- Original Message -----
> From: "Andrija Panic" <an...@gmail.com>
> To: "users" <us...@cloudstack.apache.org>, "jordan" <jo...@viviotech.net>
> Sent: Thursday, 25 October, 2018 11:23:23
> Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
> 0.00KB (URGENT)
>
> Hi Jordan,
> I' would perhaps still suspect firewall issue - can you destroy SSVM and
> CPVM (they will be automatically created after few tens of seconds) - SSVM
> is the one connecting to Secondary Storage and afaik reporting back
> capacity to management server (what you see in dashboard)
>
> I did my tests by doing SSH to inside the SSVM (and CPVM), and did telnet
> to port 8250 to mgmt IP address to verify communication with mgmt. Also
> inside SSVM there is the script which you can use to check ssvm
> health: /usr/local/cloud/systemvm/ssvm-check.sh - it's use to check
> connections to mgmt server, to internet, dns resolution, if able to access
> Secondary Storage etc.... - if this script gives all OK (i.e. no errors)
> than you are good.
>
> If you need help doing ssh to SSVM/CPVM - check this link please:
>
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM%2C+templates%2C+Secondary+storage+troubleshooting
>
> Try please and
>
> On Thu, 25 Oct 2018 at 19:59, Jordan Michaels <mi...@viviotech.net>
> wrote:
>
> > I am encountering this issue in a single-server setup as well. The
> initial
> > setup worked fine, then I messed with some network settings a bit which
> > caused me to remove the one host, and cannot get the system up and
> running
> > again because secondary storage shows 0KB. Verified NFS shares are
> > writable, verified firewall ports are open, not sure what else to check
> or
> > to try.
> >
> > --
> > Kind regards,
> > Jordan Michaels
> > Vivio Technologies
> >
> > ----- Original Message -----
> > From: "Alexandre Bruyere" <br...@gmail.com>
> > To: "users" <us...@cloudstack.apache.org>
> > Sent: Wednesday, 24 October, 2018 06:39:43
> > Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY
> STORAGE
> > 0.00KB (URGENT)
> >
> > Just saw you followed it, and I'm not sure where the problem is, I'll
> need
> > to study it - I've had no trouble on my part.
> >
> > On Wed, Oct 24, 2018 at 9:34 AM Alexandre Bruyere <
> > bruyere.alexandre@gmail.com> wrote:
> >
> > > For reference, you can use iptables commands in firewall-cmd by using
> the
> > > --direct option.
> > >
> > > I've made a pull request to update the Quick Installation Guide with an
> > > example of commands you can use to configure the firewall.
> > >
> > > On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic <andrija.panic@gmail.com
> >
> > > wrote:
> > >
> > >> I assume a bit late (just a few months :) - but for sake of other
> list
> > >> members - had exactly the same case, because of FIREWALL on CentOS 7
> > >>
> > >> - dashboard shows ZERO capacity, since SSVM is NOT functional -
> because
> > >> agent inside SSVM could not connect to Management Server - because of
> > >> FIREWALL...
> > >> - running ssvm.sh script reported BAD IP address of the Secondary
> > Storage
> > >> inside VM - so make sure the agent is CONNECTED when viewing SSVM and
> > CPVM
> > >> from Infrastructure --> System VMs...
> > >> - also CPVM was not working - again, because agent was not connected
> to
> > >> mgmt server..
> > >>
> > >> Firewall can be properly fixed/configured (obviously), or you can try
> > temp
> > >> workaround:
> > >> systemctl disable firewalld
> > >> systemctl stop firewalld
> > >>
> > >> After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and
> > >> wait
> > >> for SSVM and CPVM to be created and that agent connects (Agent State
> > shows
> > >> UP in GUI)
> > >>
> > >> Cheers
> > >> Andrija
> > >>
> > >> On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <
> Dag.Sonstebo@shapeblue.com>
> > >> wrote:
> > >>
> > >> > Hi Olivier,
> > >> >
> > >> > Can you write to the NFS mount from SSVM? It could be you have it
> > >> mounted
> > >> > OK, but ACLs and/or settings prevent you from actually
> > reading/writing.
> > >> >
> > >> > Also keep in mind the NFS permissions you need to set
> > >> > (rw,async,no_root_squash,no_subtree_check) – some pointers on
> > >> >
> > >>
> >
> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
> > >> >
> > >> > Regards,
> > >> > Dag Sonstebo
> > >> > Cloud Architect
> > >> > ShapeBlue
> > >> >
> > >> > On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com>
> > wrote:
> > >> >
> > >> > Hi,
> > >> >
> > >> > I've a problem with secondary storage, in the dashboard it is
> > >> 0.00KB .
> > >> >
> > >> > In the ssvm, when I launch ssvm.check : This no nfs mount
> > >> directory !
> > >> >
> > >> > root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
> > >> > ================================================
> > >> > First DNS server is 200.13.136.8
> > >> > PING 200.13.136.8 (200.13.136.8): 56 data bytes
> > >> > 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
> > >> > 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
> > >> > --- 200.13.136.8 ping statistics ---
> > >> > 2 packets transmitted, 2 packets received, 0% packet loss
> > >> > round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
> > >> > Good: Can ping DNS server
> > >> > ================================================
> > >> > Good: DNS resolves cloudstack.apache.org
> > >> > ================================================
> > >> > nfs is currently mounted
> > >> > ================================================
> > >> > Management server is 172.16.1.5. Checking connectivity.
> > >> > ./ssvm-check.sh: line 121: warning: command substitution:
> ignored
> > >> null
> > >> > byte in input
> > >> > Good: Can connect to management server port 8250
> > >> > ================================================
> > >> > Good: Java process is running
> > >> > ================================================
> > >> > Tests Complete. Look for ERROR or WARNING above.
> > >> >
> > >> > Can you help me to verify ssvm (Apache CloudStack SystemVM
> > 4.11.0):
> > >> >
> > >> > eth0 => cloud_link_local_network : 169.254.0.123
> > >> > eth1 => net-mgmt (managment) : IP OK ping server managment
> > >> > eth2 => net-public : IP public : ping 8.8.8.8 and ping
> > >> www.google.com
> > >> > eth3 => net-storage : IP storage : ping nfs server
> > >> >
> > >> > My log :
> > >> >
> > >> > 2018-03-23 13:22:26,166 WARN
> > [c.c.a.d.ParamGenericValidationWorker]
> > >> > (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b)
> > >> Received
> > >> > unknown parameters for command listSystemVms. Unknown
> parameters :
> > >> > listall
> > >> > 2018-03-23 13:22:31,740 WARN
> > [c.c.a.d.ParamGenericValidationWorker]
> > >> > (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
> > >> > Received
> > >> > unknown parameters for command listHosts. Unknown parameters :
> > >> listall
> > >> > 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
> > >> > (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
> > >> > complete the ping task
> > >> >
> > >> > I don't undestand ...
> > >> >
> > >> > I use
> > >> http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
> > >> > (yum.repos.d)
> > >> >
> > >> > I use this script to install, reinstall etc .... :-)
> > >> >
> > >> > #!/bin/sh
> > >> > clear
> > >> > yum clean all
> > >> > yum update -y
> > >> > yum install cloudstack-management cloudstack-usage -y
> > >> > cd /opt/
> > >> > wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
> > >> > mv vhd-util
> > >> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
> > >> > chmod +x
> > >> >
> > >> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
> > >> > cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
> > >> > --deploy-as=root:Xxxxxxxxxxx
> > >> > cloudstack-setup-management
> > >> > rmdir /tmp/secondary
> > >> > mkdir /tmp/secondary
> > >> > mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
> > >> >
> > >> >
> > >>
> >
> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
> > >> >
> > >> > -m /tmp/secondary -u
> > >> >
> > >> >
> > >>
> >
> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
> > >> > -h xenserver
> > >> > umount /tmp/secondary/
> > >> > rmdir /tmp/secondary/
> > >> > tail -f /var/log/cloudstack/management/management-server.log
> > >> >
> > >> > Thank's a lot
> > >> >
> > >> > Olivier
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > Dag.Sonstebo@shapeblue.com
> > >> > www.shapeblue.com
> > >> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
> > >> > @shapeblue
> > >> >
> > >> >
> > >> >
> > >> >
> > >>
> > >> --
> > >>
> > >> Andrija Panić
> > >>
> > >
> >
>
>
> --
>
> Andrija Panić
>
--
Andrija Panić
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
Posted by Andrija Panic <an...@gmail.com>.
Well, my apologies also - I see now that the original thread stated a
normally working SSVM... Seems I was rushing with my answer :)
On Thu, 25 Oct 2018 at 23:48, Jordan Michaels <mi...@viviotech.net> wrote:
> Hi Andrija,
>
> Maybe my issue is different then. I apologize, as I didn't mean to hijack
> this thread. It just sounded very similar to the issue I am experiencing.
>
> In my case, the SSVM's are never created, because the system seems to not
> be able to find the storage. I'll keep working on it.
>
> Thank you!
>
> --
> Kind regards,
> Jordan Michaels
> Vivio Technologies
>
> ----- Original Message -----
> From: "Andrija Panic" <an...@gmail.com>
> To: "users" <us...@cloudstack.apache.org>, "jordan" <jo...@viviotech.net>
> Sent: Thursday, 25 October, 2018 11:23:23
> Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
> 0.00KB (URGENT)
>
> Hi Jordan,
> I' would perhaps still suspect firewall issue - can you destroy SSVM and
> CPVM (they will be automatically created after few tens of seconds) - SSVM
> is the one connecting to Secondary Storage and afaik reporting back
> capacity to management server (what you see in dashboard)
>
> I did my tests by doing SSH to inside the SSVM (and CPVM), and did telnet
> to port 8250 to mgmt IP address to verify communication with mgmt. Also
> inside SSVM there is the script which you can use to check ssvm
> health: /usr/local/cloud/systemvm/ssvm-check.sh - it's use to check
> connections to mgmt server, to internet, dns resolution, if able to access
> Secondary Storage etc.... - if this script gives all OK (i.e. no errors)
> than you are good.
>
> If you need help doing ssh to SSVM/CPVM - check this link please:
>
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM%2C+templates%2C+Secondary+storage+troubleshooting
>
> Try please and
>
> On Thu, 25 Oct 2018 at 19:59, Jordan Michaels <mi...@viviotech.net>
> wrote:
>
> > I am encountering this issue in a single-server setup as well. The
> initial
> > setup worked fine, then I messed with some network settings a bit which
> > caused me to remove the one host, and cannot get the system up and
> running
> > again because secondary storage shows 0KB. Verified NFS shares are
> > writable, verified firewall ports are open, not sure what else to check
> or
> > to try.
> >
> > --
> > Kind regards,
> > Jordan Michaels
> > Vivio Technologies
> >
> > ----- Original Message -----
> > From: "Alexandre Bruyere" <br...@gmail.com>
> > To: "users" <us...@cloudstack.apache.org>
> > Sent: Wednesday, 24 October, 2018 06:39:43
> > Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY
> STORAGE
> > 0.00KB (URGENT)
> >
> > Just saw you followed it, and I'm not sure where the problem is, I'll
> need
> > to study it - I've had no trouble on my part.
> >
> > On Wed, Oct 24, 2018 at 9:34 AM Alexandre Bruyere <
> > bruyere.alexandre@gmail.com> wrote:
> >
> > > For reference, you can use iptables commands in firewall-cmd by using
> the
> > > --direct option.
> > >
> > > I've made a pull request to update the Quick Installation Guide with an
> > > example of commands you can use to configure the firewall.
> > >
> > > On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic <andrija.panic@gmail.com
> >
> > > wrote:
> > >
> > >> I assume a bit late (just a few months :) - but for sake of other
> list
> > >> members - had exactly the same case, because of FIREWALL on CentOS 7
> > >>
> > >> - dashboard shows ZERO capacity, since SSVM is NOT functional -
> because
> > >> agent inside SSVM could not connect to Management Server - because of
> > >> FIREWALL...
> > >> - running ssvm.sh script reported BAD IP address of the Secondary
> > Storage
> > >> inside VM - so make sure the agent is CONNECTED when viewing SSVM and
> > CPVM
> > >> from Infrastructure --> System VMs...
> > >> - also CPVM was not working - again, because agent was not connected
> to
> > >> mgmt server..
> > >>
> > >> Firewall can be properly fixed/configured (obviously), or you can try
> > temp
> > >> workaround:
> > >> systemctl disable firewalld
> > >> systemctl stop firewalld
> > >>
> > >> After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and
> > >> wait
> > >> for SSVM and CPVM to be created and that agent connects (Agent State
> > shows
> > >> UP in GUI)
> > >>
> > >> Cheers
> > >> Andrija
> > >>
> > >> On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <
> Dag.Sonstebo@shapeblue.com>
> > >> wrote:
> > >>
> > >> > Hi Olivier,
> > >> >
> > >> > Can you write to the NFS mount from SSVM? It could be you have it
> > >> mounted
> > >> > OK, but ACLs and/or settings prevent you from actually
> > reading/writing.
> > >> >
> > >> > Also keep in mind the NFS permissions you need to set
> > >> > (rw,async,no_root_squash,no_subtree_check) – some pointers on
> > >> >
> > >>
> >
> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
> > >> >
> > >> > Regards,
> > >> > Dag Sonstebo
> > >> > Cloud Architect
> > >> > ShapeBlue
> > >> >
> > >> > On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com>
> > wrote:
> > >> >
> > >> > Hi,
> > >> >
> > >> > I've a problem with secondary storage, in the dashboard it is
> > >> 0.00KB .
> > >> >
> > >> > In the ssvm, when I launch ssvm.check : This no nfs mount
> > >> directory !
> > >> >
> > >> > root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
> > >> > ================================================
> > >> > First DNS server is 200.13.136.8
> > >> > PING 200.13.136.8 (200.13.136.8): 56 data bytes
> > >> > 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
> > >> > 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
> > >> > --- 200.13.136.8 ping statistics ---
> > >> > 2 packets transmitted, 2 packets received, 0% packet loss
> > >> > round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
> > >> > Good: Can ping DNS server
> > >> > ================================================
> > >> > Good: DNS resolves cloudstack.apache.org
> > >> > ================================================
> > >> > nfs is currently mounted
> > >> > ================================================
> > >> > Management server is 172.16.1.5. Checking connectivity.
> > >> > ./ssvm-check.sh: line 121: warning: command substitution:
> ignored
> > >> null
> > >> > byte in input
> > >> > Good: Can connect to management server port 8250
> > >> > ================================================
> > >> > Good: Java process is running
> > >> > ================================================
> > >> > Tests Complete. Look for ERROR or WARNING above.
> > >> >
> > >> > Can you help me to verify ssvm (Apache CloudStack SystemVM
> > 4.11.0):
> > >> >
> > >> > eth0 => cloud_link_local_network : 169.254.0.123
> > >> > eth1 => net-mgmt (managment) : IP OK ping server managment
> > >> > eth2 => net-public : IP public : ping 8.8.8.8 and ping
> > >> www.google.com
> > >> > eth3 => net-storage : IP storage : ping nfs server
> > >> >
> > >> > My log :
> > >> >
> > >> > 2018-03-23 13:22:26,166 WARN
> > [c.c.a.d.ParamGenericValidationWorker]
> > >> > (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b)
> > >> Received
> > >> > unknown parameters for command listSystemVms. Unknown
> parameters :
> > >> > listall
> > >> > 2018-03-23 13:22:31,740 WARN
> > [c.c.a.d.ParamGenericValidationWorker]
> > >> > (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
> > >> > Received
> > >> > unknown parameters for command listHosts. Unknown parameters :
> > >> listall
> > >> > 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
> > >> > (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
> > >> > complete the ping task
> > >> >
> > >> > I don't undestand ...
> > >> >
> > >> > I use
> > >> http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
> > >> > (yum.repos.d)
> > >> >
> > >> > I use this script to install, reinstall etc .... :-)
> > >> >
> > >> > #!/bin/sh
> > >> > clear
> > >> > yum clean all
> > >> > yum update -y
> > >> > yum install cloudstack-management cloudstack-usage -y
> > >> > cd /opt/
> > >> > wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
> > >> > mv vhd-util
> > >> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
> > >> > chmod +x
> > >> >
> > >> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
> > >> > cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
> > >> > --deploy-as=root:Xxxxxxxxxxx
> > >> > cloudstack-setup-management
> > >> > rmdir /tmp/secondary
> > >> > mkdir /tmp/secondary
> > >> > mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
> > >> >
> > >> >
> > >>
> >
> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
> > >> >
> > >> > -m /tmp/secondary -u
> > >> >
> > >> >
> > >>
> >
> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
> > >> > -h xenserver
> > >> > umount /tmp/secondary/
> > >> > rmdir /tmp/secondary/
> > >> > tail -f /var/log/cloudstack/management/management-server.log
> > >> >
> > >> > Thank's a lot
> > >> >
> > >> > Olivier
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > Dag.Sonstebo@shapeblue.com
> > >> > www.shapeblue.com
> > >> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
> > >> > @shapeblue
> > >> >
> > >> >
> > >> >
> > >> >
> > >>
> > >> --
> > >>
> > >> Andrija Panić
> > >>
> > >
> >
>
>
> --
>
> Andrija Panić
>
--
Andrija Panić
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
Posted by Jordan Michaels <mi...@viviotech.net>.
Hi Andrija,
Maybe my issue is different then. I apologize, as I didn't mean to hijack this thread. It just sounded very similar to the issue I am experiencing.
In my case, the SSVM's are never created, because the system seems to not be able to find the storage. I'll keep working on it.
Thank you!
--
Kind regards,
Jordan Michaels
Vivio Technologies
----- Original Message -----
From: "Andrija Panic" <an...@gmail.com>
To: "users" <us...@cloudstack.apache.org>, "jordan" <jo...@viviotech.net>
Sent: Thursday, 25 October, 2018 11:23:23
Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE 0.00KB (URGENT)
Hi Jordan,
I' would perhaps still suspect firewall issue - can you destroy SSVM and
CPVM (they will be automatically created after few tens of seconds) - SSVM
is the one connecting to Secondary Storage and afaik reporting back
capacity to management server (what you see in dashboard)
I did my tests by doing SSH to inside the SSVM (and CPVM), and did telnet
to port 8250 to mgmt IP address to verify communication with mgmt. Also
inside SSVM there is the script which you can use to check ssvm
health: /usr/local/cloud/systemvm/ssvm-check.sh - it's use to check
connections to mgmt server, to internet, dns resolution, if able to access
Secondary Storage etc.... - if this script gives all OK (i.e. no errors)
than you are good.
If you need help doing ssh to SSVM/CPVM - check this link please:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM%2C+templates%2C+Secondary+storage+troubleshooting
Try please and
On Thu, 25 Oct 2018 at 19:59, Jordan Michaels <mi...@viviotech.net> wrote:
> I am encountering this issue in a single-server setup as well. The initial
> setup worked fine, then I messed with some network settings a bit which
> caused me to remove the one host, and cannot get the system up and running
> again because secondary storage shows 0KB. Verified NFS shares are
> writable, verified firewall ports are open, not sure what else to check or
> to try.
>
> --
> Kind regards,
> Jordan Michaels
> Vivio Technologies
>
> ----- Original Message -----
> From: "Alexandre Bruyere" <br...@gmail.com>
> To: "users" <us...@cloudstack.apache.org>
> Sent: Wednesday, 24 October, 2018 06:39:43
> Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
> 0.00KB (URGENT)
>
> Just saw you followed it, and I'm not sure where the problem is, I'll need
> to study it - I've had no trouble on my part.
>
> On Wed, Oct 24, 2018 at 9:34 AM Alexandre Bruyere <
> bruyere.alexandre@gmail.com> wrote:
>
> > For reference, you can use iptables commands in firewall-cmd by using the
> > --direct option.
> >
> > I've made a pull request to update the Quick Installation Guide with an
> > example of commands you can use to configure the firewall.
> >
> > On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic <an...@gmail.com>
> > wrote:
> >
> >> I assume a bit late (just a few months :) - but for sake of other list
> >> members - had exactly the same case, because of FIREWALL on CentOS 7
> >>
> >> - dashboard shows ZERO capacity, since SSVM is NOT functional - because
> >> agent inside SSVM could not connect to Management Server - because of
> >> FIREWALL...
> >> - running ssvm.sh script reported BAD IP address of the Secondary
> Storage
> >> inside VM - so make sure the agent is CONNECTED when viewing SSVM and
> CPVM
> >> from Infrastructure --> System VMs...
> >> - also CPVM was not working - again, because agent was not connected to
> >> mgmt server..
> >>
> >> Firewall can be properly fixed/configured (obviously), or you can try
> temp
> >> workaround:
> >> systemctl disable firewalld
> >> systemctl stop firewalld
> >>
> >> After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and
> >> wait
> >> for SSVM and CPVM to be created and that agent connects (Agent State
> shows
> >> UP in GUI)
> >>
> >> Cheers
> >> Andrija
> >>
> >> On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <Da...@shapeblue.com>
> >> wrote:
> >>
> >> > Hi Olivier,
> >> >
> >> > Can you write to the NFS mount from SSVM? It could be you have it
> >> mounted
> >> > OK, but ACLs and/or settings prevent you from actually
> reading/writing.
> >> >
> >> > Also keep in mind the NFS permissions you need to set
> >> > (rw,async,no_root_squash,no_subtree_check) – some pointers on
> >> >
> >>
> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
> >> >
> >> > Regards,
> >> > Dag Sonstebo
> >> > Cloud Architect
> >> > ShapeBlue
> >> >
> >> > On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com>
> wrote:
> >> >
> >> > Hi,
> >> >
> >> > I've a problem with secondary storage, in the dashboard it is
> >> 0.00KB .
> >> >
> >> > In the ssvm, when I launch ssvm.check : This no nfs mount
> >> directory !
> >> >
> >> > root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
> >> > ================================================
> >> > First DNS server is 200.13.136.8
> >> > PING 200.13.136.8 (200.13.136.8): 56 data bytes
> >> > 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
> >> > 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
> >> > --- 200.13.136.8 ping statistics ---
> >> > 2 packets transmitted, 2 packets received, 0% packet loss
> >> > round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
> >> > Good: Can ping DNS server
> >> > ================================================
> >> > Good: DNS resolves cloudstack.apache.org
> >> > ================================================
> >> > nfs is currently mounted
> >> > ================================================
> >> > Management server is 172.16.1.5. Checking connectivity.
> >> > ./ssvm-check.sh: line 121: warning: command substitution: ignored
> >> null
> >> > byte in input
> >> > Good: Can connect to management server port 8250
> >> > ================================================
> >> > Good: Java process is running
> >> > ================================================
> >> > Tests Complete. Look for ERROR or WARNING above.
> >> >
> >> > Can you help me to verify ssvm (Apache CloudStack SystemVM
> 4.11.0):
> >> >
> >> > eth0 => cloud_link_local_network : 169.254.0.123
> >> > eth1 => net-mgmt (managment) : IP OK ping server managment
> >> > eth2 => net-public : IP public : ping 8.8.8.8 and ping
> >> www.google.com
> >> > eth3 => net-storage : IP storage : ping nfs server
> >> >
> >> > My log :
> >> >
> >> > 2018-03-23 13:22:26,166 WARN
> [c.c.a.d.ParamGenericValidationWorker]
> >> > (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b)
> >> Received
> >> > unknown parameters for command listSystemVms. Unknown parameters :
> >> > listall
> >> > 2018-03-23 13:22:31,740 WARN
> [c.c.a.d.ParamGenericValidationWorker]
> >> > (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
> >> > Received
> >> > unknown parameters for command listHosts. Unknown parameters :
> >> listall
> >> > 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
> >> > (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
> >> > complete the ping task
> >> >
> >> > I don't undestand ...
> >> >
> >> > I use
> >> http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
> >> > (yum.repos.d)
> >> >
> >> > I use this script to install, reinstall etc .... :-)
> >> >
> >> > #!/bin/sh
> >> > clear
> >> > yum clean all
> >> > yum update -y
> >> > yum install cloudstack-management cloudstack-usage -y
> >> > cd /opt/
> >> > wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
> >> > mv vhd-util
> >> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
> >> > chmod +x
> >> >
> >> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
> >> > cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
> >> > --deploy-as=root:Xxxxxxxxxxx
> >> > cloudstack-setup-management
> >> > rmdir /tmp/secondary
> >> > mkdir /tmp/secondary
> >> > mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
> >> >
> >> >
> >>
> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
> >> >
> >> > -m /tmp/secondary -u
> >> >
> >> >
> >>
> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
> >> > -h xenserver
> >> > umount /tmp/secondary/
> >> > rmdir /tmp/secondary/
> >> > tail -f /var/log/cloudstack/management/management-server.log
> >> >
> >> > Thank's a lot
> >> >
> >> > Olivier
> >> >
> >> >
> >> >
> >> >
> >> > Dag.Sonstebo@shapeblue.com
> >> > www.shapeblue.com
> >> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
> >> > @shapeblue
> >> >
> >> >
> >> >
> >> >
> >>
> >> --
> >>
> >> Andrija Panić
> >>
> >
>
--
Andrija Panić
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
Posted by Andrija Panic <an...@gmail.com>.
Hi Jordan,
I' would perhaps still suspect firewall issue - can you destroy SSVM and
CPVM (they will be automatically created after few tens of seconds) - SSVM
is the one connecting to Secondary Storage and afaik reporting back
capacity to management server (what you see in dashboard)
I did my tests by doing SSH to inside the SSVM (and CPVM), and did telnet
to port 8250 to mgmt IP address to verify communication with mgmt. Also
inside SSVM there is the script which you can use to check ssvm
health: /usr/local/cloud/systemvm/ssvm-check.sh - it's use to check
connections to mgmt server, to internet, dns resolution, if able to access
Secondary Storage etc.... - if this script gives all OK (i.e. no errors)
than you are good.
If you need help doing ssh to SSVM/CPVM - check this link please:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM%2C+templates%2C+Secondary+storage+troubleshooting
Try please and
On Thu, 25 Oct 2018 at 19:59, Jordan Michaels <mi...@viviotech.net> wrote:
> I am encountering this issue in a single-server setup as well. The initial
> setup worked fine, then I messed with some network settings a bit which
> caused me to remove the one host, and cannot get the system up and running
> again because secondary storage shows 0KB. Verified NFS shares are
> writable, verified firewall ports are open, not sure what else to check or
> to try.
>
> --
> Kind regards,
> Jordan Michaels
> Vivio Technologies
>
> ----- Original Message -----
> From: "Alexandre Bruyere" <br...@gmail.com>
> To: "users" <us...@cloudstack.apache.org>
> Sent: Wednesday, 24 October, 2018 06:39:43
> Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
> 0.00KB (URGENT)
>
> Just saw you followed it, and I'm not sure where the problem is, I'll need
> to study it - I've had no trouble on my part.
>
> On Wed, Oct 24, 2018 at 9:34 AM Alexandre Bruyere <
> bruyere.alexandre@gmail.com> wrote:
>
> > For reference, you can use iptables commands in firewall-cmd by using the
> > --direct option.
> >
> > I've made a pull request to update the Quick Installation Guide with an
> > example of commands you can use to configure the firewall.
> >
> > On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic <an...@gmail.com>
> > wrote:
> >
> >> I assume a bit late (just a few months :) - but for sake of other list
> >> members - had exactly the same case, because of FIREWALL on CentOS 7
> >>
> >> - dashboard shows ZERO capacity, since SSVM is NOT functional - because
> >> agent inside SSVM could not connect to Management Server - because of
> >> FIREWALL...
> >> - running ssvm.sh script reported BAD IP address of the Secondary
> Storage
> >> inside VM - so make sure the agent is CONNECTED when viewing SSVM and
> CPVM
> >> from Infrastructure --> System VMs...
> >> - also CPVM was not working - again, because agent was not connected to
> >> mgmt server..
> >>
> >> Firewall can be properly fixed/configured (obviously), or you can try
> temp
> >> workaround:
> >> systemctl disable firewalld
> >> systemctl stop firewalld
> >>
> >> After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and
> >> wait
> >> for SSVM and CPVM to be created and that agent connects (Agent State
> shows
> >> UP in GUI)
> >>
> >> Cheers
> >> Andrija
> >>
> >> On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <Da...@shapeblue.com>
> >> wrote:
> >>
> >> > Hi Olivier,
> >> >
> >> > Can you write to the NFS mount from SSVM? It could be you have it
> >> mounted
> >> > OK, but ACLs and/or settings prevent you from actually
> reading/writing.
> >> >
> >> > Also keep in mind the NFS permissions you need to set
> >> > (rw,async,no_root_squash,no_subtree_check) – some pointers on
> >> >
> >>
> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
> >> >
> >> > Regards,
> >> > Dag Sonstebo
> >> > Cloud Architect
> >> > ShapeBlue
> >> >
> >> > On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com>
> wrote:
> >> >
> >> > Hi,
> >> >
> >> > I've a problem with secondary storage, in the dashboard it is
> >> 0.00KB .
> >> >
> >> > In the ssvm, when I launch ssvm.check : This no nfs mount
> >> directory !
> >> >
> >> > root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
> >> > ================================================
> >> > First DNS server is 200.13.136.8
> >> > PING 200.13.136.8 (200.13.136.8): 56 data bytes
> >> > 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
> >> > 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
> >> > --- 200.13.136.8 ping statistics ---
> >> > 2 packets transmitted, 2 packets received, 0% packet loss
> >> > round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
> >> > Good: Can ping DNS server
> >> > ================================================
> >> > Good: DNS resolves cloudstack.apache.org
> >> > ================================================
> >> > nfs is currently mounted
> >> > ================================================
> >> > Management server is 172.16.1.5. Checking connectivity.
> >> > ./ssvm-check.sh: line 121: warning: command substitution: ignored
> >> null
> >> > byte in input
> >> > Good: Can connect to management server port 8250
> >> > ================================================
> >> > Good: Java process is running
> >> > ================================================
> >> > Tests Complete. Look for ERROR or WARNING above.
> >> >
> >> > Can you help me to verify ssvm (Apache CloudStack SystemVM
> 4.11.0):
> >> >
> >> > eth0 => cloud_link_local_network : 169.254.0.123
> >> > eth1 => net-mgmt (managment) : IP OK ping server managment
> >> > eth2 => net-public : IP public : ping 8.8.8.8 and ping
> >> www.google.com
> >> > eth3 => net-storage : IP storage : ping nfs server
> >> >
> >> > My log :
> >> >
> >> > 2018-03-23 13:22:26,166 WARN
> [c.c.a.d.ParamGenericValidationWorker]
> >> > (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b)
> >> Received
> >> > unknown parameters for command listSystemVms. Unknown parameters :
> >> > listall
> >> > 2018-03-23 13:22:31,740 WARN
> [c.c.a.d.ParamGenericValidationWorker]
> >> > (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
> >> > Received
> >> > unknown parameters for command listHosts. Unknown parameters :
> >> listall
> >> > 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
> >> > (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
> >> > complete the ping task
> >> >
> >> > I don't undestand ...
> >> >
> >> > I use
> >> http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
> >> > (yum.repos.d)
> >> >
> >> > I use this script to install, reinstall etc .... :-)
> >> >
> >> > #!/bin/sh
> >> > clear
> >> > yum clean all
> >> > yum update -y
> >> > yum install cloudstack-management cloudstack-usage -y
> >> > cd /opt/
> >> > wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
> >> > mv vhd-util
> >> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
> >> > chmod +x
> >> >
> >> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
> >> > cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
> >> > --deploy-as=root:Xxxxxxxxxxx
> >> > cloudstack-setup-management
> >> > rmdir /tmp/secondary
> >> > mkdir /tmp/secondary
> >> > mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
> >> >
> >> >
> >>
> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
> >> >
> >> > -m /tmp/secondary -u
> >> >
> >> >
> >>
> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
> >> > -h xenserver
> >> > umount /tmp/secondary/
> >> > rmdir /tmp/secondary/
> >> > tail -f /var/log/cloudstack/management/management-server.log
> >> >
> >> > Thank's a lot
> >> >
> >> > Olivier
> >> >
> >> >
> >> >
> >> >
> >> > Dag.Sonstebo@shapeblue.com
> >> > www.shapeblue.com
> >> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
> >> > @shapeblue
> >> >
> >> >
> >> >
> >> >
> >>
> >> --
> >>
> >> Andrija Panić
> >>
> >
>
--
Andrija Panić
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
Posted by Jordan Michaels <mi...@viviotech.net>.
I am encountering this issue in a single-server setup as well. The initial setup worked fine, then I messed with some network settings a bit which caused me to remove the one host, and cannot get the system up and running again because secondary storage shows 0KB. Verified NFS shares are writable, verified firewall ports are open, not sure what else to check or to try.
--
Kind regards,
Jordan Michaels
Vivio Technologies
----- Original Message -----
From: "Alexandre Bruyere" <br...@gmail.com>
To: "users" <us...@cloudstack.apache.org>
Sent: Wednesday, 24 October, 2018 06:39:43
Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE 0.00KB (URGENT)
Just saw you followed it, and I'm not sure where the problem is, I'll need
to study it - I've had no trouble on my part.
On Wed, Oct 24, 2018 at 9:34 AM Alexandre Bruyere <
bruyere.alexandre@gmail.com> wrote:
> For reference, you can use iptables commands in firewall-cmd by using the
> --direct option.
>
> I've made a pull request to update the Quick Installation Guide with an
> example of commands you can use to configure the firewall.
>
> On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic <an...@gmail.com>
> wrote:
>
>> I assume a bit late (just a few months :) - but for sake of other list
>> members - had exactly the same case, because of FIREWALL on CentOS 7
>>
>> - dashboard shows ZERO capacity, since SSVM is NOT functional - because
>> agent inside SSVM could not connect to Management Server - because of
>> FIREWALL...
>> - running ssvm.sh script reported BAD IP address of the Secondary Storage
>> inside VM - so make sure the agent is CONNECTED when viewing SSVM and CPVM
>> from Infrastructure --> System VMs...
>> - also CPVM was not working - again, because agent was not connected to
>> mgmt server..
>>
>> Firewall can be properly fixed/configured (obviously), or you can try temp
>> workaround:
>> systemctl disable firewalld
>> systemctl stop firewalld
>>
>> After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and
>> wait
>> for SSVM and CPVM to be created and that agent connects (Agent State shows
>> UP in GUI)
>>
>> Cheers
>> Andrija
>>
>> On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <Da...@shapeblue.com>
>> wrote:
>>
>> > Hi Olivier,
>> >
>> > Can you write to the NFS mount from SSVM? It could be you have it
>> mounted
>> > OK, but ACLs and/or settings prevent you from actually reading/writing.
>> >
>> > Also keep in mind the NFS permissions you need to set
>> > (rw,async,no_root_squash,no_subtree_check) – some pointers on
>> >
>> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
>> >
>> > Regards,
>> > Dag Sonstebo
>> > Cloud Architect
>> > ShapeBlue
>> >
>> > On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com> wrote:
>> >
>> > Hi,
>> >
>> > I've a problem with secondary storage, in the dashboard it is
>> 0.00KB .
>> >
>> > In the ssvm, when I launch ssvm.check : This no nfs mount
>> directory !
>> >
>> > root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
>> > ================================================
>> > First DNS server is 200.13.136.8
>> > PING 200.13.136.8 (200.13.136.8): 56 data bytes
>> > 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
>> > 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
>> > --- 200.13.136.8 ping statistics ---
>> > 2 packets transmitted, 2 packets received, 0% packet loss
>> > round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
>> > Good: Can ping DNS server
>> > ================================================
>> > Good: DNS resolves cloudstack.apache.org
>> > ================================================
>> > nfs is currently mounted
>> > ================================================
>> > Management server is 172.16.1.5. Checking connectivity.
>> > ./ssvm-check.sh: line 121: warning: command substitution: ignored
>> null
>> > byte in input
>> > Good: Can connect to management server port 8250
>> > ================================================
>> > Good: Java process is running
>> > ================================================
>> > Tests Complete. Look for ERROR or WARNING above.
>> >
>> > Can you help me to verify ssvm (Apache CloudStack SystemVM 4.11.0):
>> >
>> > eth0 => cloud_link_local_network : 169.254.0.123
>> > eth1 => net-mgmt (managment) : IP OK ping server managment
>> > eth2 => net-public : IP public : ping 8.8.8.8 and ping
>> www.google.com
>> > eth3 => net-storage : IP storage : ping nfs server
>> >
>> > My log :
>> >
>> > 2018-03-23 13:22:26,166 WARN [c.c.a.d.ParamGenericValidationWorker]
>> > (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b)
>> Received
>> > unknown parameters for command listSystemVms. Unknown parameters :
>> > listall
>> > 2018-03-23 13:22:31,740 WARN [c.c.a.d.ParamGenericValidationWorker]
>> > (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
>> > Received
>> > unknown parameters for command listHosts. Unknown parameters :
>> listall
>> > 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
>> > (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
>> > complete the ping task
>> >
>> > I don't undestand ...
>> >
>> > I use
>> http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
>> > (yum.repos.d)
>> >
>> > I use this script to install, reinstall etc .... :-)
>> >
>> > #!/bin/sh
>> > clear
>> > yum clean all
>> > yum update -y
>> > yum install cloudstack-management cloudstack-usage -y
>> > cd /opt/
>> > wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
>> > mv vhd-util
>> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
>> > chmod +x
>> >
>> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
>> > cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
>> > --deploy-as=root:Xxxxxxxxxxx
>> > cloudstack-setup-management
>> > rmdir /tmp/secondary
>> > mkdir /tmp/secondary
>> > mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
>> >
>> >
>> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
>> >
>> > -m /tmp/secondary -u
>> >
>> >
>> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
>> > -h xenserver
>> > umount /tmp/secondary/
>> > rmdir /tmp/secondary/
>> > tail -f /var/log/cloudstack/management/management-server.log
>> >
>> > Thank's a lot
>> >
>> > Olivier
>> >
>> >
>> >
>> >
>> > Dag.Sonstebo@shapeblue.com
>> > www.shapeblue.com
>> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
>> > @shapeblue
>> >
>> >
>> >
>> >
>>
>> --
>>
>> Andrija Panić
>>
>
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
Posted by Alexandre Bruyere <br...@gmail.com>.
Just saw you followed it, and I'm not sure where the problem is, I'll need
to study it - I've had no trouble on my part.
On Wed, Oct 24, 2018 at 9:34 AM Alexandre Bruyere <
bruyere.alexandre@gmail.com> wrote:
> For reference, you can use iptables commands in firewall-cmd by using the
> --direct option.
>
> I've made a pull request to update the Quick Installation Guide with an
> example of commands you can use to configure the firewall.
>
> On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic <an...@gmail.com>
> wrote:
>
>> I assume a bit late (just a few months :) - but for sake of other list
>> members - had exactly the same case, because of FIREWALL on CentOS 7
>>
>> - dashboard shows ZERO capacity, since SSVM is NOT functional - because
>> agent inside SSVM could not connect to Management Server - because of
>> FIREWALL...
>> - running ssvm.sh script reported BAD IP address of the Secondary Storage
>> inside VM - so make sure the agent is CONNECTED when viewing SSVM and CPVM
>> from Infrastructure --> System VMs...
>> - also CPVM was not working - again, because agent was not connected to
>> mgmt server..
>>
>> Firewall can be properly fixed/configured (obviously), or you can try temp
>> workaround:
>> systemctl disable firewalld
>> systemctl stop firewalld
>>
>> After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and
>> wait
>> for SSVM and CPVM to be created and that agent connects (Agent State shows
>> UP in GUI)
>>
>> Cheers
>> Andrija
>>
>> On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <Da...@shapeblue.com>
>> wrote:
>>
>> > Hi Olivier,
>> >
>> > Can you write to the NFS mount from SSVM? It could be you have it
>> mounted
>> > OK, but ACLs and/or settings prevent you from actually reading/writing.
>> >
>> > Also keep in mind the NFS permissions you need to set
>> > (rw,async,no_root_squash,no_subtree_check) – some pointers on
>> >
>> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
>> >
>> > Regards,
>> > Dag Sonstebo
>> > Cloud Architect
>> > ShapeBlue
>> >
>> > On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com> wrote:
>> >
>> > Hi,
>> >
>> > I've a problem with secondary storage, in the dashboard it is
>> 0.00KB .
>> >
>> > In the ssvm, when I launch ssvm.check : This no nfs mount
>> directory !
>> >
>> > root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
>> > ================================================
>> > First DNS server is 200.13.136.8
>> > PING 200.13.136.8 (200.13.136.8): 56 data bytes
>> > 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
>> > 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
>> > --- 200.13.136.8 ping statistics ---
>> > 2 packets transmitted, 2 packets received, 0% packet loss
>> > round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
>> > Good: Can ping DNS server
>> > ================================================
>> > Good: DNS resolves cloudstack.apache.org
>> > ================================================
>> > nfs is currently mounted
>> > ================================================
>> > Management server is 172.16.1.5. Checking connectivity.
>> > ./ssvm-check.sh: line 121: warning: command substitution: ignored
>> null
>> > byte in input
>> > Good: Can connect to management server port 8250
>> > ================================================
>> > Good: Java process is running
>> > ================================================
>> > Tests Complete. Look for ERROR or WARNING above.
>> >
>> > Can you help me to verify ssvm (Apache CloudStack SystemVM 4.11.0):
>> >
>> > eth0 => cloud_link_local_network : 169.254.0.123
>> > eth1 => net-mgmt (managment) : IP OK ping server managment
>> > eth2 => net-public : IP public : ping 8.8.8.8 and ping
>> www.google.com
>> > eth3 => net-storage : IP storage : ping nfs server
>> >
>> > My log :
>> >
>> > 2018-03-23 13:22:26,166 WARN [c.c.a.d.ParamGenericValidationWorker]
>> > (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b)
>> Received
>> > unknown parameters for command listSystemVms. Unknown parameters :
>> > listall
>> > 2018-03-23 13:22:31,740 WARN [c.c.a.d.ParamGenericValidationWorker]
>> > (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
>> > Received
>> > unknown parameters for command listHosts. Unknown parameters :
>> listall
>> > 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
>> > (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
>> > complete the ping task
>> >
>> > I don't undestand ...
>> >
>> > I use
>> http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
>> > (yum.repos.d)
>> >
>> > I use this script to install, reinstall etc .... :-)
>> >
>> > #!/bin/sh
>> > clear
>> > yum clean all
>> > yum update -y
>> > yum install cloudstack-management cloudstack-usage -y
>> > cd /opt/
>> > wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
>> > mv vhd-util
>> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
>> > chmod +x
>> >
>> /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
>> > cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
>> > --deploy-as=root:Xxxxxxxxxxx
>> > cloudstack-setup-management
>> > rmdir /tmp/secondary
>> > mkdir /tmp/secondary
>> > mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
>> >
>> >
>> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
>> >
>> > -m /tmp/secondary -u
>> >
>> >
>> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
>> > -h xenserver
>> > umount /tmp/secondary/
>> > rmdir /tmp/secondary/
>> > tail -f /var/log/cloudstack/management/management-server.log
>> >
>> > Thank's a lot
>> >
>> > Olivier
>> >
>> >
>> >
>> >
>> > Dag.Sonstebo@shapeblue.com
>> > www.shapeblue.com
>> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
>> > @shapeblue
>> >
>> >
>> >
>> >
>>
>> --
>>
>> Andrija Panić
>>
>
Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
0.00KB (URGENT)
Posted by Alexandre Bruyere <br...@gmail.com>.
For reference, you can use iptables commands in firewall-cmd by using the
--direct option.
I've made a pull request to update the Quick Installation Guide with an
example of commands you can use to configure the firewall.
On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic <an...@gmail.com>
wrote:
> I assume a bit late (just a few months :) - but for sake of other list
> members - had exactly the same case, because of FIREWALL on CentOS 7
>
> - dashboard shows ZERO capacity, since SSVM is NOT functional - because
> agent inside SSVM could not connect to Management Server - because of
> FIREWALL...
> - running ssvm.sh script reported BAD IP address of the Secondary Storage
> inside VM - so make sure the agent is CONNECTED when viewing SSVM and CPVM
> from Infrastructure --> System VMs...
> - also CPVM was not working - again, because agent was not connected to
> mgmt server..
>
> Firewall can be properly fixed/configured (obviously), or you can try temp
> workaround:
> systemctl disable firewalld
> systemctl stop firewalld
>
> After that, disable Zone, destroy both CPVM and SSVM, Enable Zone, and wait
> for SSVM and CPVM to be created and that agent connects (Agent State shows
> UP in GUI)
>
> Cheers
> Andrija
>
> On Fri, 23 Mar 2018 at 17:52, Dag Sonstebo <Da...@shapeblue.com>
> wrote:
>
> > Hi Olivier,
> >
> > Can you write to the NFS mount from SSVM? It could be you have it mounted
> > OK, but ACLs and/or settings prevent you from actually reading/writing.
> >
> > Also keep in mind the NFS permissions you need to set
> > (rw,async,no_root_squash,no_subtree_check) – some pointers on
> >
> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/management-server/index.html#using-a-separate-nfs-server
> >
> > Regards,
> > Dag Sonstebo
> > Cloud Architect
> > ShapeBlue
> >
> > On 23/03/2018, 16:27, "Olivier GUIN" <ol...@ariasnet.com> wrote:
> >
> > Hi,
> >
> > I've a problem with secondary storage, in the dashboard it is 0.00KB
> .
> >
> > In the ssvm, when I launch ssvm.check : This no nfs mount directory
> !
> >
> > root@s-2-VM:/usr/local/cloud/systemvm# ./ssvm-check.sh
> > ================================================
> > First DNS server is 200.13.136.8
> > PING 200.13.136.8 (200.13.136.8): 56 data bytes
> > 64 bytes from 200.13.136.8: icmp_seq=0 ttl=63 time=2.566 ms
> > 64 bytes from 200.13.136.8: icmp_seq=1 ttl=63 time=0.516 ms
> > --- 200.13.136.8 ping statistics ---
> > 2 packets transmitted, 2 packets received, 0% packet loss
> > round-trip min/avg/max/stddev = 0.516/1.541/2.566/1.025 ms
> > Good: Can ping DNS server
> > ================================================
> > Good: DNS resolves cloudstack.apache.org
> > ================================================
> > nfs is currently mounted
> > ================================================
> > Management server is 172.16.1.5. Checking connectivity.
> > ./ssvm-check.sh: line 121: warning: command substitution: ignored
> null
> > byte in input
> > Good: Can connect to management server port 8250
> > ================================================
> > Good: Java process is running
> > ================================================
> > Tests Complete. Look for ERROR or WARNING above.
> >
> > Can you help me to verify ssvm (Apache CloudStack SystemVM 4.11.0):
> >
> > eth0 => cloud_link_local_network : 169.254.0.123
> > eth1 => net-mgmt (managment) : IP OK ping server managment
> > eth2 => net-public : IP public : ping 8.8.8.8 and ping
> www.google.com
> > eth3 => net-storage : IP storage : ping nfs server
> >
> > My log :
> >
> > 2018-03-23 13:22:26,166 WARN [c.c.a.d.ParamGenericValidationWorker]
> > (qtp1796488937-14:ctx-ad319378 ctx-45f67ed3) (logid:60b07a9b)
> Received
> > unknown parameters for command listSystemVms. Unknown parameters :
> > listall
> > 2018-03-23 13:22:31,740 WARN [c.c.a.d.ParamGenericValidationWorker]
> > (qtp1796488937-1691:ctx-95b8fcab ctx-d9892e7b) (logid:56afab29)
> > Received
> > unknown parameters for command listHosts. Unknown parameters :
> listall
> > 2018-03-23 13:22:38,604 WARN [c.c.a.m.DirectAgentAttache]
> > (DirectAgentCronJob-186:ctx-45bbd1b8) (logid:1e90d267) Unable to
> > complete the ping task
> >
> > I don't undestand ...
> >
> > I use http://packages.shapeblue.com/cloudstack/upstream/centos7/4.11
> > (yum.repos.d)
> >
> > I use this script to install, reinstall etc .... :-)
> >
> > #!/bin/sh
> > clear
> > yum clean all
> > yum update -y
> > yum install cloudstack-management cloudstack-usage -y
> > cd /opt/
> > wget http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
> > mv vhd-util
> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/
> > chmod +x
> > /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/vhd-util
> > cloudstack-setup-databases cloud:Xxxxxxxxxx@localhost
> > --deploy-as=root:Xxxxxxxxxxx
> > cloudstack-setup-management
> > rmdir /tmp/secondary
> > mkdir /tmp/secondary
> > mount -t nfs 172.16.6.3:/volume1/cs/secondary /tmp/secondary
> >
> >
> /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
> >
> > -m /tmp/secondary -u
> >
> >
> http://packages.shapeblue.com.s3-eu-west-1.amazonaws.com/systemvmtemplate/4.11/systemvmtemplate-4.11.0-xen.vhd.bz2
> > -h xenserver
> > umount /tmp/secondary/
> > rmdir /tmp/secondary/
> > tail -f /var/log/cloudstack/management/management-server.log
> >
> > Thank's a lot
> >
> > Olivier
> >
> >
> >
> >
> > Dag.Sonstebo@shapeblue.com
> > www.shapeblue.com
> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
> > @shapeblue
> >
> >
> >
> >
>
> --
>
> Andrija Panić
>