You are viewing a plain text version of this content. The canonical link for it is here.
Posted to p-dev@xerces.apache.org by Ted Onley <ta...@tao-system.com> on 2004/06/15 21:40:55 UTC
Build error with XML::Xerces
I was very interested to find out about Xerces. My understanding about
the install was that I must install the C++ libraries for the Perl version
to work. I downloaded the current versions of both Xerces-C and Xerces-P,
dir the build of the C++ code, and then tried the build of the Perl code.
I received a version mismatch error:
You are attempt to build XML::Xerces-2.3.0 using Xerces-C-2.5.0,
this will most likely fail, so I am aborting.
You must use Xerces-C-2.5.0
I'm assuming the last line meant to say 'Xerces-C-2.3.0', although I could
be wrong there. Anyhow, when searching the download archives, I can only
find XML::Xerces-2.3.0 and Xerces-C-2.5.0 -- Not XML::Xerces-2.5.0, which
I would think would work with Xerces-C-2.5.0 - OR - Xerces-C-2.3.0, which
I would think would work with XML::Xerces-2.3.0.
Am I missing something???
Ted
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-p-dev-help@xml.apache.org
Re: XML::Xerces and mod_perl
Posted by Eric Just <e-...@northwestern.edu>.
I might add some important facts:
I am in windows running apache 1.3 and mod_perl 1
At 06:02 PM 8/2/2004 -0500, you wrote:
>Is anyone using XML::Xerces in mod_perl? I keep running into an error:
> Handling Unknown exception at c:/Perl/site/lib/XML/Xerces.pm line 5255.
>
> in both PerlRun and Apache::Registry the SECOND time i try to load a
> page which uses an XML::Xerces DOM parser. The first try works fine, and
> the code works every time if I am not running in mod_perl.
>Does anyone know of a solution or workaround to this kind of problem?
>
>
>Thanks!
>Eric
>
>============================================
>
>Eric Just
>e-just@northwestern.edu
>dictyBase Programmer
>Center for Genetic Medicine
>Northwestern University
>http://dictybase.org
>
>============================================
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
>For additional commands, e-mail: xerces-p-dev-help@xml.apache.org
============================================
Eric Just
e-just@northwestern.edu
dictyBase Programmer
Center for Genetic Medicine
Northwestern University
http://dictybase.org
============================================
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-p-dev-help@xml.apache.org
Re: Build error with XML::Xerces
Posted by "Jason E. Stewart" <ja...@openinformatics.com>.
"Ted Onley" <ta...@onley.org> writes:
> OK...
>
> Did the make with Xerces-C-2.3.0, and the Perl make worked. However, on my
> 'make test' I received and error 29. It looks like 't/actualCast.t' was the
> test that had 2 failures!?? (10-11).
>
> Can I ignore this and just install, or am I going to have issues?
Hi Ted,
This has been discussed on the list a bit - it was a test
misconfiguration issue (two extra tests were run), and it does not
affect the parser.
Try the new 2.5 release just out today, and it should eliminate this
entirely.
Cheers,
jas.
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-p-dev-help@xml.apache.org
RE: Build error with XML::Xerces
Posted by Ted Onley <ta...@onley.org>.
OK...
Did the make with Xerces-C-2.3.0, and the Perl make worked. However, on my
'make test' I received and error 29. It looks like 't/actualCast.t' was the
test that had 2 failures!?? (10-11).
Can I ignore this and just install, or am I going to have issues?
Ted
-----Original Message-----
From: Adam Witney [mailto:awitney@sghms.ac.uk]
Sent: Tuesday, June 15, 2004 2:55 PM
To: xerces-p-dev@xml.apache.org; Ted Onley
Subject: Re: Build error with XML::Xerces
Hi Ted,
I don't think there is a XML::Xerces-2.5.0 yet, but you can get the
Xerces-C-2.3.0 from here
http://archive.apache.org/dist/xml/xerces-c/Xerces-C_2_3_0/
There was another message about that incorrect warning earlier today I
think, so it is a recent known problem.
Cheers
adam
> I was very interested to find out about Xerces. My understanding about
> the install was that I must install the C++ libraries for the Perl version
> to work. I downloaded the current versions of both Xerces-C and Xerces-P,
> dir the build of the C++ code, and then tried the build of the Perl code.
> I received a version mismatch error:
>
> You are attempt to build XML::Xerces-2.3.0 using Xerces-C-2.5.0,
> this will most likely fail, so I am aborting.
>
> You must use Xerces-C-2.5.0
>
> I'm assuming the last line meant to say 'Xerces-C-2.3.0', although I could
> be wrong there. Anyhow, when searching the download archives, I can only
> find XML::Xerces-2.3.0 and Xerces-C-2.5.0 -- Not XML::Xerces-2.5.0, which
> I would think would work with Xerces-C-2.5.0 - OR - Xerces-C-2.3.0, which
> I would think would work with XML::Xerces-2.3.0.
>
> Am I missing something???
>
> Ted
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-p-dev-help@xml.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-p-dev-help@xml.apache.org
Re: Build error with XML::Xerces
Posted by Adam Witney <aw...@sghms.ac.uk>.
Hi Ted,
I don't think there is a XML::Xerces-2.5.0 yet, but you can get the
Xerces-C-2.3.0 from here
http://archive.apache.org/dist/xml/xerces-c/Xerces-C_2_3_0/
There was another message about that incorrect warning earlier today I
think, so it is a recent known problem.
Cheers
adam
> I was very interested to find out about Xerces. My understanding about
> the install was that I must install the C++ libraries for the Perl version
> to work. I downloaded the current versions of both Xerces-C and Xerces-P,
> dir the build of the C++ code, and then tried the build of the Perl code.
> I received a version mismatch error:
>
> You are attempt to build XML::Xerces-2.3.0 using Xerces-C-2.5.0,
> this will most likely fail, so I am aborting.
>
> You must use Xerces-C-2.5.0
>
> I'm assuming the last line meant to say 'Xerces-C-2.3.0', although I could
> be wrong there. Anyhow, when searching the download archives, I can only
> find XML::Xerces-2.3.0 and Xerces-C-2.5.0 -- Not XML::Xerces-2.5.0, which
> I would think would work with Xerces-C-2.5.0 - OR - Xerces-C-2.3.0, which
> I would think would work with XML::Xerces-2.3.0.
>
> Am I missing something???
>
> Ted
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-p-dev-help@xml.apache.org
XML::Xerces and mod_perl
Posted by Eric Just <e-...@northwestern.edu>.
Is anyone using XML::Xerces in mod_perl? I keep running into an error:
Handling Unknown exception at c:/Perl/site/lib/XML/Xerces.pm line 5255.
in both PerlRun and Apache::Registry the SECOND time i try to load a page
which uses an XML::Xerces DOM parser. The first try works fine, and the
code works every time if I am not running in mod_perl.
Does anyone know of a solution or workaround to this kind of problem?
Thanks!
Eric
============================================
Eric Just
e-just@northwestern.edu
dictyBase Programmer
Center for Genetic Medicine
Northwestern University
http://dictybase.org
============================================
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-p-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-p-dev-help@xml.apache.org