You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@qpid.apache.org by Sanath_Prudhvi <Sa...@mahindrasatyam.com> on 2011/01/04 05:53:59 UTC
Apache Qpid Error
Hi All,
I am Sanath Kumar new to AMQP (Apache Qpid implementation).
I am using Windows XP SP2 operating system with Visual Studio 2008.
Last week I have downloaded "C++ Broker & Client qpid-cpp-0.8.tar.gz" file.
As per the recommendations I have downloaded Python (1.86 version) and Ruby (1.9.2 version)
respectively. I have created a PATH Environment variable like "PATH = C:\Python26; C:\Ruby192\bin;"
for both Python and Ruby.
I have downloaded Boost Libraries of version 1.42 and set below environment variables
BOOST_ROOT : C:\Program Files(x86)\boost\boost_1_42
BOOST_VERSION : 104200
After completing the above settings I have downloaded and install CMAKE of version 2.8.6.
I execute the .exe file of CMAKE and given Source Path (where my qpid-cpp folder exists :- E:\sanath\qpid-cpp_0-8)
And destination/ build path as E:\Sanath\Build
In the configuration window I have selected the Visual Studio 9 2008 and set the C++ compiler as default/ native C++
Compiler.
When I clicked on "Configuration" button I am getting the following error which are collected in a text file and
Attached same with this email. Please suggest/ guide me to install and run Apache Qpid C++ Broker without any
Error / Fail
thanks,
- Sanath
________________________________
DISCLAIMER:
This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated.
Re: Apache Qpid Error
Posted by Chuck Rolke <cr...@redhat.com>.
Hi Sanath,
The qpid-cpp-0.8.tar.gz file is missing the directory bindings\qpid\dotnet and so the CMake fails.
Please try downloading the Full source release qpid-0.8.tar.gz and try again from there.
Alternatively you could copy the bindings\qpid\dotnet directory from the full source to your test area E:/qpidc-0.8/bindings/qpid/dotnet and try again there. In testing the 0.8 kit(s) I only built from the Full source release and didn't spot the problem you are seeing.
Regards,
Chuck
----- Original Message -----
> From: "Sanath_Prudhvi" <Sa...@mahindrasatyam.com>
> To: users@qpid.apache.org
> Sent: Monday, January 3, 2011 11:53:59 PM
> Subject: Apache Qpid Error
> Hi All,
>
> I am Sanath Kumar new to AMQP (Apache Qpid implementation).
>
> I am using Windows XP SP2 operating system with Visual Studio 2008.
>
> Last week I have downloaded “C++ Broker & Client qpid-cpp-0.8.tar.gz”
> file.
>
> As per the recommendations I have downloaded Python (1.86 version) and
> Ruby (1.9.2 version)
>
> respectively. I have created a PATH Environment variable like “PATH =
> C:\Python26; C:\Ruby192\bin;”
>
> for both Python and Ruby.
>
> I have downloaded Boost Libraries of version 1.42 and set below
> environment variables
>
> BOOST_ROOT : C:\Program Files(x86)\boost\boost_1_42
>
> BOOST_VERSION : 104200
>
> After completing the above settings I have downloaded and install
> CMAKE of version 2.8.6.
>
> I execute the .exe file of CMAKE and given Source Path (where my
> qpid-cpp folder exists :- E:\sanath\qpid-cpp_0-8)
>
> And destination/ build path as E:\Sanath\Build
>
> In the configuration window I have selected the Visual Studio 9 2008
> and set the C++ compiler as default/ native C++
>
> Compiler.
>
> When I clicked on “Configuration” button I am getting the following
> error which are collected in a text file and
>
> Attached same with this email. Please suggest/ guide me to install and
> run Apache Qpid C++ Broker without any
>
> Error / Fail
>
>
> thanks,
>
> - Sanath
>
>
>
> DISCLAIMER:
> This email (including any attachments) is intended for the sole use of
> the intended recipient/s and may contain material that is CONFIDENTIAL
> AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or
> copying or distribution or forwarding of any or all of the contents in
> this message is STRICTLY PROHIBITED. If you are not the intended
> recipient, please contact the sender by email and delete all copies;
> your cooperation in this regard is appreciated.
>
>
> ---------------------------------------------------------------------
> Apache Qpid - AMQP Messaging Implementation
> Project: http://qpid.apache.org
> Use/Interact: mailto:users-subscribe@qpid.apache.org
---------------------------------------------------------------------
Apache Qpid - AMQP Messaging Implementation
Project: http://qpid.apache.org
Use/Interact: mailto:users-subscribe@qpid.apache.org
RE: Apache Qpid Error
Posted by Steve Huston <sh...@riverace.com>.
Hi Sanath,
It appears that a directory was left out of the tar file. Could you
please open a JIRA for this issue to ensure it is resolved for the next
version? I will attach the files you need to the jira when I see it.
Sorry for the errors.
-Steve
--
Steve Huston, Riverace Corporation
Total Lifecycle Support for Your Networked Applications
http://www.riverace.com <http://www.riverace.com/>
-----Original Message-----
From: Sanath_Prudhvi [mailto:Sanath_Prudhvi@mahindrasatyam.com]
Sent: Monday, January 03, 2011 11:54 PM
To: users@qpid.apache.org
Subject: Apache Qpid Error
Hi All,
I am Sanath Kumar new to AMQP (Apache Qpid implementation).
I am using Windows XP SP2 operating system with Visual Studio 2008.
Last week I have downloaded "C++ Broker & Client qpid-cpp-0.8.tar.gz"
file.
As per the recommendations I have downloaded Python (1.86 version) and
Ruby (1.9.2 version)
respectively. I have created a PATH Environment variable like "PATH =
C:\Python26; C:\Ruby192\bin;"
for both Python and Ruby.
I have downloaded Boost Libraries of version 1.42 and set below
environment variables
BOOST_ROOT : C:\Program Files(x86)\boost\boost_1_42
BOOST_VERSION : 104200
After completing the above settings I have downloaded and install CMAKE
of version 2.8.6.
I execute the .exe file of CMAKE and given Source Path (where my
qpid-cpp folder exists :- E:\sanath\qpid-cpp_0-8)
And destination/ build path as E:\Sanath\Build
In the configuration window I have selected the Visual Studio 9 2008 and
set the C++ compiler as default/ native C++
Compiler.
When I clicked on "Configuration" button I am getting the following
error which are collected in a text file and
Attached same with this email. Please suggest/ guide me to install and
run Apache Qpid C++ Broker without any
Error / Fail
thanks,
- Sanath
_____
DISCLAIMER:
This email (including any attachments) is intended for the sole use of
the intended recipient/s and may contain material that is CONFIDENTIAL
AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or
copying or distribution or forwarding of any or all of the contents in
this message is STRICTLY PROHIBITED. If you are not the intended
recipient, please contact the sender by email and delete all copies;
your cooperation in this regard is appreciated.