You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Gene Cooper <gc...@sonoracomm.com> on 2013/09/20 20:56:51 UTC
Public Networking Clarification Request
Hi,
I'm setting up CS 4.1.1 in a datacenter and have been assigned a single
/27 block of public IPs.
I'm trying to determine the best way to configure the networking,
routing and switching for the TOR.
On XenServer hosts, I plan to share Public and Guest traffic on one
interface with separate management, primary and secondary storage
interfaces. So I calculate I need to configure VLANs for Guest and
Public similarly to this image:
http://www.shapeblue.com/wp-content/uploads/2013/01/PhysicalNetworkingBlog_logicandphysnet-300x226.png
I have the traditional (multi-port) router and (L3 Cisco) switch at the
TOR with the CS physical networks connected to the switch.
How should I configure the switching (VLANs), routing and public IP
address assignments? Should I assign all public IPs to the upstream
port on the router and forward them in? Should I get another /30 from
the DC and route the /27 in?
I plan to bring additional guest networks into the router via VPNs and
P-t-P circuits later. For now, I only have one guest network coming in
on a separate router port.
I don't have much practical experience with VLANs in Cisco switches.
Thanks in advance,
Gene
Re: Public Networking Clarification Request
Posted by Gene Cooper <gc...@sonoracomm.com>.
I had a thought. Should I just terminate the datacenter Internet feed
in the switch on the Public VLAN?
G
On 09/20/2013 11:56 AM, Gene Cooper wrote:
> Hi,
>
> I'm setting up CS 4.1.1 in a datacenter and have been assigned a single
> /27 block of public IPs.
>
> I'm trying to determine the best way to configure the networking,
> routing and switching for the TOR.
>
> On XenServer hosts, I plan to share Public and Guest traffic on one
> interface with separate management, primary and secondary storage
> interfaces. So I calculate I need to configure VLANs for Guest and
> Public similarly to this image:
> http://www.shapeblue.com/wp-content/uploads/2013/01/PhysicalNetworkingBlog_logicandphysnet-300x226.png
>
>
> I have the traditional (multi-port) router and (L3 Cisco) switch at the
> TOR with the CS physical networks connected to the switch.
>
> How should I configure the switching (VLANs), routing and public IP
> address assignments? Should I assign all public IPs to the upstream
> port on the router and forward them in? Should I get another /30 from
> the DC and route the /27 in?
>
> I plan to bring additional guest networks into the router via VPNs and
> P-t-P circuits later. For now, I only have one guest network coming in
> on a separate router port.
>
> I don't have much practical experience with VLANs in Cisco switches.
>
> Thanks in advance,
>
> Gene
>
--
===========================
Gene Cooper
Sonora Communications, Inc.
936 W. Prince Road
Tucson, AZ 85705
(520)407-2000 x101
(520)888-4060 fax