You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by GitBox <gi...@apache.org> on 2018/08/15 10:56:47 UTC
[GitHub] utzig closed pull request #1334: Fixed stm32 AF macros and
consolidated in single header file.
utzig closed pull request #1334: Fixed stm32 AF macros and consolidated in single header file.
URL: https://github.com/apache/mynewt-core/pull/1334
This is a PR merged from a forked repository.
As GitHub hides the original diff on merge, it is displayed below for
the sake of provenance:
As this is a foreign pull request (from a fork), the diff is supplied
below (as it won't show otherwise due to GitHub magic):
diff --git a/hw/mcu/stm/stm32_common/include/stm32_common/mcu.h b/hw/mcu/stm/stm32_common/include/stm32_common/mcu.h
new file mode 100644
index 0000000000..52503a6780
--- /dev/null
+++ b/hw/mcu/stm/stm32_common/include/stm32_common/mcu.h
@@ -0,0 +1,113 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+#ifndef __MCU_STM_MCU_H_
+#define __MCU_STM_MCU_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Note that not all processors have support for all ports.
+ *
+ * GPIO pin mapping
+ *
+ * The stm32 processors have 16 gpio pins per port. The encoding of IO pins
+ * to logical pins has the pattern
+ *
+ * pin = 0xA.PN
+ *
+ * where
+ * A .... AF of the pin, see data sheet
+ * . .... 0, reserved
+ * P .... Port number GPIOA=0, GPIOB=1, GPIOC=2, ....
+ * N .... Pin number within port
+ *
+ * A GPIO pin (general purpose IO) is a pin with the AF=0. For readability
+ * we provide macros for GPIO pin mappings and IO pins with enabled alternate
+ * function, called AFIO. There is no conceptual difference between them.
+ */
+
+/*
+ * Defines for naming GPIOs.
+ */
+#define MCU_GPIO_PORTA(pin) ((0 * 16) + (pin))
+#define MCU_GPIO_PORTB(pin) ((1 * 16) + (pin))
+#define MCU_GPIO_PORTC(pin) ((2 * 16) + (pin))
+#define MCU_GPIO_PORTD(pin) ((3 * 16) + (pin))
+#define MCU_GPIO_PORTE(pin) ((4 * 16) + (pin))
+#define MCU_GPIO_PORTF(pin) ((5 * 16) + (pin))
+#define MCU_GPIO_PORTG(pin) ((6 * 16) + (pin))
+#define MCU_GPIO_PORTH(pin) ((7 * 16) + (pin))
+#define MCU_GPIO_PORTI(pin) ((8 * 16) + (pin))
+#define MCU_GPIO_PORTJ(pin) ((9 * 16) + (pin))
+#define MCU_GPIO_PORTK(pin) ((10 * 16) + (pin))
+
+/*
+ * Helper macros to extract components from a pin descriptor.
+ */
+#define MCU_GPIO_PIN_NUM(pin) (0x000F & pin)
+#define MCU_GPIO_PIN_PORT(pin) (0x000F & (pin >> 4))
+#define MCU_GPIO_PIN_PAD(pin) (0x00FF & pin)
+
+/*
+ * Use this value for pins that should not be used.
+ */
+#define MCU_GPIO_PIN_NONE (0xFFFF)
+
+
+/*
+ * Mapping of a GPIO pin to an alternate function.
+ */
+#define MCU_AFIO_GPIO(pin,af) (((0x0F & af) << 12) | (0x00FF & pin))
+
+/*
+ * Mapping of alternate function pin descriptors.
+ */
+#define MCU_AFIO_PORTA(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTA(pin), af)
+#define MCU_AFIO_PORTB(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTB(pin), af)
+#define MCU_AFIO_PORTC(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTC(pin), af)
+#define MCU_AFIO_PORTD(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTD(pin), af)
+#define MCU_AFIO_PORTE(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTE(pin), af)
+#define MCU_AFIO_PORTF(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTF(pin), af)
+#define MCU_AFIO_PORTG(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTG(pin), af)
+#define MCU_AFIO_PORTH(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTH(pin), af)
+#define MCU_AFIO_PORTI(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTI(pin), af)
+#define MCU_AFIO_PORTJ(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTJ(pin), af)
+#define MCU_AFIO_PORTK(pin, af) MCU_AFIO_GPIO(MCU_GPIO_PORTK(pin), af)
+
+/*
+ * Helper macros to extract components from a pin descriptor.
+ */
+#define MCU_AFIO_PIN_NUM(pin) MCU_GPIO_PIN_NUM(pin)
+#define MCU_AFIO_PIN_PORT(pin) MCU_GPIO_PIN_PORT(pin)
+#define MCU_AFIO_PIN_PAD(pin) MCU_GPIO_PIN_PAD(pin)
+#define MCU_AFIO_PIN_AF(pin) (0x000F & (pin >> 12))
+
+/*
+ * Use this value for pins that should not be used.
+ */
+#define MCU_AFIO_PIN_NONE (0xFFFF)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MCU_STM_MCU_H_ */
diff --git a/hw/mcu/stm/stm32_common/src/hal_gpio.c b/hw/mcu/stm/stm32_common/src/hal_gpio.c
index cabead97e6..872122e74f 100644
--- a/hw/mcu/stm/stm32_common/src/hal_gpio.c
+++ b/hw/mcu/stm/stm32_common/src/hal_gpio.c
@@ -20,6 +20,7 @@
#include "hal/hal_gpio.h"
#include "mcu/cmsis_nvic.h"
#include "mcu/stm32_hal.h"
+#include "stm32_common/mcu.h"
#include <assert.h>
/* XXX: Notes
@@ -43,26 +44,7 @@
* 5) Possibly add access to HAL_GPIO_DeInit.
*/
-/*
- * GPIO pin mapping
- *
- * The stm32Fxxx processors have 16 gpio pins per port. We map the logical pin
- * numbers (from 0 to N) in the following manner:
- * Port A: PA0-PA15 map to pins 0 - 15.
- * Port B: PB0-PB15 map to pins 16 - 31.
- * Port C: PC0-PC15 map to pins 32 - 47.
- *
- * To convert a gpio to pin number, do the following:
- * - Convert port label to its numeric value (A=0, B=1, C=2, etc).
- * - Multiply by 16.
- * - Add port pin number.
- *
- * Ex: PD11 = (3 * 16) + 11 = 59.
- * PA0 = (0 * 16) + 0 = 0
- */
-#define GPIO_INDEX(pin) ((pin) & 0x0F)
-#define GPIO_PORT(pin) (((pin) >> 4) & 0x0F)
-#define GPIO_MASK(pin) (1 << GPIO_INDEX(pin))
+#define GPIO_MASK(pin) (1 << MCU_GPIO_PIN_NUM(pin))
#ifndef GPIOA
# define GPIOA 0
@@ -350,7 +332,7 @@ hal_gpio_pin_to_irq(int pin)
int index;
IRQn_Type irqn;
- index = GPIO_INDEX(pin);
+ index = MCU_GPIO_PIN_NUM(pin);
if (index <= 4) {
irqn = EXTI0_IRQn + index;
} else if (index <= 9) {
@@ -422,7 +404,7 @@ hal_gpio_init_stm(int pin, GPIO_InitTypeDef *cfg)
uint32_t mcu_pin_mask;
/* Is this a valid pin? */
- port = GPIO_PORT(pin);
+ port = MCU_GPIO_PIN_PORT(pin);
if (port >= HAL_GPIO_PORT_COUNT) {
return -1;
}
@@ -456,7 +438,7 @@ hal_gpio_deinit_stm(int pin, GPIO_InitTypeDef *cfg)
uint32_t mcu_pin_mask;
/* Is this a valid pin? */
- port = GPIO_PORT(pin);
+ port = MCU_GPIO_PIN_PORT(pin);
if (port >= HAL_GPIO_PORT_COUNT) {
return -1;
}
@@ -510,7 +492,7 @@ int hal_gpio_init_out(int pin, int val)
int port;
/* Is this a valid pin? */
- port = GPIO_PORT(pin);
+ port = MCU_GPIO_PIN_PORT(pin);
if (port >= HAL_GPIO_PORT_COUNT) {
return -1;
}
@@ -585,7 +567,7 @@ void hal_gpio_write(int pin, int val)
uint32_t mcu_pin_mask;
GPIO_PinState state;
- port = GPIO_PORT(pin);
+ port = MCU_GPIO_PIN_PORT(pin);
mcu_pin_mask = GPIO_MASK(pin);
if (val) {
@@ -611,7 +593,7 @@ int hal_gpio_read(int pin)
int port;
uint32_t mcu_pin_mask;
- port = GPIO_PORT(pin);
+ port = MCU_GPIO_PIN_PORT(pin);
mcu_pin_mask = GPIO_MASK(pin);
return HAL_GPIO_ReadPin(portmap[port], mcu_pin_mask);
}
@@ -690,7 +672,7 @@ hal_gpio_irq_init(int pin, hal_gpio_irq_handler_t handler, void *arg,
__HAL_GPIO_EXTI_CLEAR_FLAG(pin_mask);
/* Set the gpio irq handler */
- index = GPIO_INDEX(pin);
+ index = MCU_GPIO_PIN_NUM(pin);
gpio_irq_handlers[index].isr = handler;
gpio_irq_handlers[index].arg = arg;
@@ -732,7 +714,7 @@ hal_gpio_irq_release(int pin)
__HAL_GPIO_EXTI_CLEAR_FLAG(pin_mask);
/* Clear out the irq handler */
- index = GPIO_INDEX(pin);
+ index = MCU_GPIO_PIN_NUM(pin);
gpio_irq_handlers[index].arg = NULL;
gpio_irq_handlers[index].isr = NULL;
}
diff --git a/hw/mcu/stm/stm32f1xx/include/mcu/mcu.h b/hw/mcu/stm/stm32f1xx/include/mcu/mcu.h
index 0458b28313..3f707ac000 100644
--- a/hw/mcu/stm/stm32f1xx/include/mcu/mcu.h
+++ b/hw/mcu/stm/stm32f1xx/include/mcu/mcu.h
@@ -20,25 +20,14 @@
#ifndef __MCU_MCU_H_
#define __MCU_MCU_H_
+#include <stm32_common/mcu.h>
+
#ifdef __cplusplus
extern "C" {
#endif
#define SVC_IRQ_NUMBER SVCall_IRQn
-/*
- * Defines for naming GPIOs.
- */
-#define MCU_GPIO_PORTA(pin) ((0 * 16) + (pin))
-#define MCU_GPIO_PORTB(pin) ((1 * 16) + (pin))
-#define MCU_GPIO_PORTC(pin) ((2 * 16) + (pin))
-#define MCU_GPIO_PORTD(pin) ((3 * 16) + (pin))
-#define MCU_GPIO_PORTE(pin) ((4 * 16) + (pin))
-#define MCU_GPIO_PORTF(pin) ((5 * 16) + (pin))
-#define MCU_GPIO_PORTG(pin) ((6 * 16) + (pin))
-#define MCU_GPIO_PORTH(pin) ((7 * 16) + (pin))
-#define MCU_GPIO_PORTI(pin) ((8 * 16) + (pin))
-
#ifdef __cplusplus
}
#endif
diff --git a/hw/mcu/stm/stm32f3xx/include/mcu/mcu.h b/hw/mcu/stm/stm32f3xx/include/mcu/mcu.h
index bd5a29e14b..f68848ce92 100644
--- a/hw/mcu/stm/stm32f3xx/include/mcu/mcu.h
+++ b/hw/mcu/stm/stm32f3xx/include/mcu/mcu.h
@@ -20,59 +20,12 @@
#ifndef __MCU_MCU_H_
#define __MCU_MCU_H_
+#include <stm32_common/mcu.h>
+
#ifdef __cplusplus
extern "C" {
#endif
-/*
- * Defines for naming GPIOs.
- */
-#define MCU_GPIO_PORTA(pin) ((0 * 16) + (pin))
-#define MCU_GPIO_PORTB(pin) ((1 * 16) + (pin))
-#define MCU_GPIO_PORTC(pin) ((2 * 16) + (pin))
-#define MCU_GPIO_PORTD(pin) ((3 * 16) + (pin))
-#define MCU_GPIO_PORTE(pin) ((4 * 16) + (pin))
-#define MCU_GPIO_PORTF(pin) ((5 * 16) + (pin))
-#define MCU_GPIO_PORTG(pin) ((6 * 16) + (pin))
-#define MCU_GPIO_PORTH(pin) ((7 * 16) + (pin))
-#define MCU_GPIO_PORTI(pin) ((8 * 16) + (pin))
-#define MCU_GPIO_PORTJ(pin) ((9 * 16) + (pin))
-/* NOTE: PORTK only have pins 0, 1, 3, 4, 5, 6, 7 available */
-#define MCU_GPIO_PORTK(pin) ((10 * 16) + (pin))
-
-/*
- * Mapping of a GPIO pin to an alternate function.
- */
-#define MCU_AFIO_GPIO(pin,af) (((0x0F & af) << 12) | (0x00FF & pin))
-
-/*
- * Mapping of alternate function pin descriptors.
- */
-#define MCU_AFIO_PORTA(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTA(pin))
-#define MCU_AFIO_PORTB(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTB(pin))
-#define MCU_AFIO_PORTC(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTC(pin))
-#define MCU_AFIO_PORTD(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTD(pin))
-#define MCU_AFIO_PORTE(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTE(pin))
-#define MCU_AFIO_PORTF(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTF(pin))
-#define MCU_AFIO_PORTG(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTG(pin))
-#define MCU_AFIO_PORTH(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTH(pin))
-#define MCU_AFIO_PORTI(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTI(pin))
-#define MCU_AFIO_PORTJ(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTJ(pin))
-#define MCU_AFIO_PORTK(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTK(pin))
-
-/*
- * Helper macros to extract components from a pin descriptor.
- */
-#define MCU_AFIO_PIN_NUM(pin) (0x000F & pin)
-#define MCU_AFIO_PIN_PORT(pin) ((0x00F0 & pin) >> 4)
-#define MCU_AFIO_PIN_PAD(pin) (0x00FF & pin)
-#define MCU_AFIO_PIN_AF(pin) ((0xF000 & pin) >> 12)
-
-/*
- * Use this value for pins that should not be used.
- */
-#define MCU_AFIO_PIN_NONE (0xFFFF)
-
#ifdef __cplusplus
}
#endif
diff --git a/hw/mcu/stm/stm32f4xx/include/mcu/mcu.h b/hw/mcu/stm/stm32f4xx/include/mcu/mcu.h
index 89751465e2..f68848ce92 100644
--- a/hw/mcu/stm/stm32f4xx/include/mcu/mcu.h
+++ b/hw/mcu/stm/stm32f4xx/include/mcu/mcu.h
@@ -20,23 +20,12 @@
#ifndef __MCU_MCU_H_
#define __MCU_MCU_H_
+#include <stm32_common/mcu.h>
+
#ifdef __cplusplus
extern "C" {
#endif
-/*
- * Defines for naming GPIOs.
- */
-#define MCU_GPIO_PORTA(pin) ((0 * 16) + (pin))
-#define MCU_GPIO_PORTB(pin) ((1 * 16) + (pin))
-#define MCU_GPIO_PORTC(pin) ((2 * 16) + (pin))
-#define MCU_GPIO_PORTD(pin) ((3 * 16) + (pin))
-#define MCU_GPIO_PORTE(pin) ((4 * 16) + (pin))
-#define MCU_GPIO_PORTF(pin) ((5 * 16) + (pin))
-#define MCU_GPIO_PORTG(pin) ((6 * 16) + (pin))
-#define MCU_GPIO_PORTH(pin) ((7 * 16) + (pin))
-#define MCU_GPIO_PORTI(pin) ((8 * 16) + (pin))
-
#ifdef __cplusplus
}
#endif
diff --git a/hw/mcu/stm/stm32f7xx/include/mcu/mcu.h b/hw/mcu/stm/stm32f7xx/include/mcu/mcu.h
index bd5a29e14b..d8443269a1 100644
--- a/hw/mcu/stm/stm32f7xx/include/mcu/mcu.h
+++ b/hw/mcu/stm/stm32f7xx/include/mcu/mcu.h
@@ -20,58 +20,12 @@
#ifndef __MCU_MCU_H_
#define __MCU_MCU_H_
+#include <stm32_common/mcu.h>
+
#ifdef __cplusplus
extern "C" {
#endif
-/*
- * Defines for naming GPIOs.
- */
-#define MCU_GPIO_PORTA(pin) ((0 * 16) + (pin))
-#define MCU_GPIO_PORTB(pin) ((1 * 16) + (pin))
-#define MCU_GPIO_PORTC(pin) ((2 * 16) + (pin))
-#define MCU_GPIO_PORTD(pin) ((3 * 16) + (pin))
-#define MCU_GPIO_PORTE(pin) ((4 * 16) + (pin))
-#define MCU_GPIO_PORTF(pin) ((5 * 16) + (pin))
-#define MCU_GPIO_PORTG(pin) ((6 * 16) + (pin))
-#define MCU_GPIO_PORTH(pin) ((7 * 16) + (pin))
-#define MCU_GPIO_PORTI(pin) ((8 * 16) + (pin))
-#define MCU_GPIO_PORTJ(pin) ((9 * 16) + (pin))
-/* NOTE: PORTK only have pins 0, 1, 3, 4, 5, 6, 7 available */
-#define MCU_GPIO_PORTK(pin) ((10 * 16) + (pin))
-
-/*
- * Mapping of a GPIO pin to an alternate function.
- */
-#define MCU_AFIO_GPIO(pin,af) (((0x0F & af) << 12) | (0x00FF & pin))
-
-/*
- * Mapping of alternate function pin descriptors.
- */
-#define MCU_AFIO_PORTA(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTA(pin))
-#define MCU_AFIO_PORTB(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTB(pin))
-#define MCU_AFIO_PORTC(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTC(pin))
-#define MCU_AFIO_PORTD(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTD(pin))
-#define MCU_AFIO_PORTE(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTE(pin))
-#define MCU_AFIO_PORTF(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTF(pin))
-#define MCU_AFIO_PORTG(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTG(pin))
-#define MCU_AFIO_PORTH(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTH(pin))
-#define MCU_AFIO_PORTI(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTI(pin))
-#define MCU_AFIO_PORTJ(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTJ(pin))
-#define MCU_AFIO_PORTK(pin, af) MCU_AFIO_GPIO(af, MCU_GPIO_PORTK(pin))
-
-/*
- * Helper macros to extract components from a pin descriptor.
- */
-#define MCU_AFIO_PIN_NUM(pin) (0x000F & pin)
-#define MCU_AFIO_PIN_PORT(pin) ((0x00F0 & pin) >> 4)
-#define MCU_AFIO_PIN_PAD(pin) (0x00FF & pin)
-#define MCU_AFIO_PIN_AF(pin) ((0xF000 & pin) >> 12)
-
-/*
- * Use this value for pins that should not be used.
- */
-#define MCU_AFIO_PIN_NONE (0xFFFF)
#ifdef __cplusplus
}
diff --git a/hw/mcu/stm/stm32l1xx/include/mcu/mcu.h b/hw/mcu/stm/stm32l1xx/include/mcu/mcu.h
index f46881629e..2ac5e96c27 100644
--- a/hw/mcu/stm/stm32l1xx/include/mcu/mcu.h
+++ b/hw/mcu/stm/stm32l1xx/include/mcu/mcu.h
@@ -20,25 +20,14 @@
#ifndef __MCU_MCU_H_
#define __MCU_MCU_H_
+#include <stm32_common/mcu.h>
+
#ifdef __cplusplus
extern "C" {
#endif
#define SVC_IRQ_NUMBER SVC_IRQn
-/*
- * Defines for naming GPIOs.
- */
-#define MCU_GPIO_PORTA(pin) ((0 * 16) + (pin))
-#define MCU_GPIO_PORTB(pin) ((1 * 16) + (pin))
-#define MCU_GPIO_PORTC(pin) ((2 * 16) + (pin))
-#define MCU_GPIO_PORTD(pin) ((3 * 16) + (pin))
-#define MCU_GPIO_PORTE(pin) ((4 * 16) + (pin))
-#define MCU_GPIO_PORTF(pin) ((5 * 16) + (pin))
-#define MCU_GPIO_PORTG(pin) ((6 * 16) + (pin))
-#define MCU_GPIO_PORTH(pin) ((7 * 16) + (pin))
-#define MCU_GPIO_PORTI(pin) ((8 * 16) + (pin))
-
#ifdef __cplusplus
}
#endif
diff --git a/hw/mcu/stm/stm32l4xx/include/mcu/mcu.h b/hw/mcu/stm/stm32l4xx/include/mcu/mcu.h
index f46881629e..2ac5e96c27 100644
--- a/hw/mcu/stm/stm32l4xx/include/mcu/mcu.h
+++ b/hw/mcu/stm/stm32l4xx/include/mcu/mcu.h
@@ -20,25 +20,14 @@
#ifndef __MCU_MCU_H_
#define __MCU_MCU_H_
+#include <stm32_common/mcu.h>
+
#ifdef __cplusplus
extern "C" {
#endif
#define SVC_IRQ_NUMBER SVC_IRQn
-/*
- * Defines for naming GPIOs.
- */
-#define MCU_GPIO_PORTA(pin) ((0 * 16) + (pin))
-#define MCU_GPIO_PORTB(pin) ((1 * 16) + (pin))
-#define MCU_GPIO_PORTC(pin) ((2 * 16) + (pin))
-#define MCU_GPIO_PORTD(pin) ((3 * 16) + (pin))
-#define MCU_GPIO_PORTE(pin) ((4 * 16) + (pin))
-#define MCU_GPIO_PORTF(pin) ((5 * 16) + (pin))
-#define MCU_GPIO_PORTG(pin) ((6 * 16) + (pin))
-#define MCU_GPIO_PORTH(pin) ((7 * 16) + (pin))
-#define MCU_GPIO_PORTI(pin) ((8 * 16) + (pin))
-
#ifdef __cplusplus
}
#endif
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
With regards,
Apache Git Services