You are viewing a plain text version of this content. The canonical link for it is here.
Posted to cvs@httpd.apache.org by bn...@apache.org on 2002/03/01 23:20:20 UTC
cvs commit: httpd-2.0/modules/dav/main NWGNUmakefile
bnicholes 02/03/01 14:20:20
Added: modules/generators NWGNUstatus
modules/mappers NWGNUspeling NWGNUrewrite
modules/metadata NWGNUmimemagi
build NWGNUmakefile
modules/aaa NWGNUmakefile
modules/dav/fs NWGNUmakefile
modules/dav/main NWGNUmakefile
Log:
Switching from a project build file to GNU make files
Revision Changes Path
1.1 httpd-2.0/modules/generators/NWGNUstatus
Index: NWGNUstatus
===================================================================
#
# Make sure all needed macro's are defined
#
#
# Get the 'head' of the build environment if necessary. This includes default
# targets and paths to tools
#
ifndef EnvironmentDefined
include $(AP_WORK)\build\NWGNUhead.inc
endif
#
# These directories will be at the beginning of the include list, followed by
# INCDIRS
#
XINCDIRS += \
$(AP_WORK)/include \
$(NWOS) \
$(AP_WORK)/modules/arch/netware \
$(AP_WORK)/srclib/apr/include \
$(AP_WORK)/srclib/apr-util/include \
$(AP_WORK)/srclib/apr \
$(EOLIST)
#
# These flags will come after CFLAGS
#
XCFLAGS += \
-prefix pre_nw.h \
$(EOLIST)
#
# These defines will come after DEFINES
#
XDEFINES += \
$(EOLIST)
#
# These flags will be added to the link.opt file
#
XLFLAGS += \
$(EOLIST)
#
# These values will be appended to the correct variables based on the value of
# RELEASE
#
ifeq "$(RELEASE)" "debug"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "noopt"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "release"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
#
# These are used by the link target if an NLM is being generated
# This is used by the link 'name' directive to name the nlm. If left blank
# TARGET_nlm (see below) will be used.
#
NLM_NAME = status
#
# This is used by the link '-desc ' directive.
# If left blank, NLM_NAME will be used.
#
NLM_DESCRIPTION = Status Module
#
# This is used by the '-threadname' directive. If left blank,
# NLM_NAME Thread will be used.
#
NLM_THREAD_NAME = Status Module
#
# If this is specified, it will override VERSION value in
# $(AP_WORK)\build\NWGNUenvironment.inc
#
NLM_VERSION =
#
# If this is specified, it will override the default of 64K
#
NLM_STACK_SIZE = 8192
#
# If this is specified it will be used by the link '-entry' directive
#
NLM_ENTRY_SYM = _LibCPrelude
#
# If this is specified it will be used by the link '-exit' directive
#
NLM_EXIT_SYM = _LibCPostlude
#
# If this is specified it will be used by the link '-check' directive
#
NLM_CHECK_SYM =
#
# If these are specified it will be used by the link '-flags' directive
#
NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
#
# If this is specified it will be linked in with the XDCData option in the def
# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
# by setting APACHE_UNIPROC in the environment
#
XDCDATA =
#
# If there is an NLM target, put it here
#
TARGET_nlm = \
$(OBJDIR)/status.nlm \
$(EOLIST)
#
# If there is an LIB target, put it here
#
TARGET_lib = \
$(EOLIST)
#
# These are the OBJ files needed to create the NLM target above.
# Paths must all use the '/' character
#
FILES_nlm_objs = \
$(OBJDIR)/mod_status.o \
$(EOLIST)
#
# These are the LIB files needed to create the NLM target above.
# These will be added as a library command in the link.opt file.
#
FILES_nlm_libs = \
libcpre.o \
$(EOLIST)
#
# These are the modules that the above NLM target depends on to load.
# These will be added as a module command in the link.opt file.
#
FILES_nlm_modules = \
aprlib \
libc \
$(EOLIST)
#
# If the nlm has a msg file, put it's path here
#
FILE_nlm_msg =
#
# If the nlm has a hlp file put it's path here
#
FILE_nlm_hlp =
#
# If this is specified, it will override $(NWOS)\copyright.txt.
#
FILE_nlm_copyright =
#
# Any additional imports go here
#
FILES_nlm_Ximports = \
@$(APR)/aprlib.imp \
@$(NWOS)/httpd.imp \
@libc.imp \
$(EOLIST)
#
# Any symbols exported to here
#
FILES_nlm_exports = \
status_module \
$(EOLIST)
#
# These are the OBJ files needed to create the LIB target above.
# Paths must all use the '/' character
#
FILES_lib_objs = \
$(EOLIST)
#
# implement targets and dependancies (leave this section alone)
#
libs :: $(OBJDIR) $(TARGET_lib)
nlms :: libs $(TARGET_nlm)
#
# Updated this target to create necessary directories and copy files to the
# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
#
install :: nlms FORCE
#
# Any specialized rules here
#
#
# Include the 'tail' makefile that has targets that depend on variables defined
# in this makefile
#
include $(AP_WORK)\build\NWGNUtail.inc
1.1 httpd-2.0/modules/mappers/NWGNUspeling
Index: NWGNUspeling
===================================================================
#
# Make sure all needed macro's are defined
#
#
# Get the 'head' of the build environment if necessary. This includes default
# targets and paths to tools
#
ifndef EnvironmentDefined
include $(AP_WORK)\build\NWGNUhead.inc
endif
#
# These directories will be at the beginning of the include list, followed by
# INCDIRS
#
XINCDIRS += \
$(AP_WORK)/include \
$(NWOS) \
$(AP_WORK)/modules/arch/netware \
$(AP_WORK)/srclib/apr/include \
$(AP_WORK)/srclib/apr-util/include \
$(AP_WORK)/srclib/apr \
$(EOLIST)
#
# These flags will come after CFLAGS
#
XCFLAGS += \
$(EOLIST)
#
# These defines will come after DEFINES
#
XDEFINES += \
$(EOLIST)
#
# These flags will be added to the link.opt file
#
XLFLAGS += \
$(EOLIST)
#
# These values will be appended to the correct variables based on the value of
# RELEASE
#
ifeq "$(RELEASE)" "debug"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "noopt"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "release"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
#
# These are used by the link target if an NLM is being generated
# This is used by the link 'name' directive to name the nlm. If left blank
# TARGET_nlm (see below) will be used.
#
NLM_NAME = speling
#
# This is used by the link '-desc ' directive.
# If left blank, NLM_NAME will be used.
#
NLM_DESCRIPTION = Speling Module
#
# This is used by the '-threadname' directive. If left blank,
# NLM_NAME Thread will be used.
#
NLM_THREAD_NAME = Speling Module
#
# If this is specified, it will override VERSION value in
# $(AP_WORK)\build\NWGNUenvironment.inc
#
NLM_VERSION =
#
# If this is specified, it will override the default of 64K
#
NLM_STACK_SIZE = 8192
#
# If this is specified it will be used by the link '-entry' directive
#
NLM_ENTRY_SYM = _LibCPrelude
#
# If this is specified it will be used by the link '-exit' directive
#
NLM_EXIT_SYM = _LibCPostlude
#
# If this is specified it will be used by the link '-check' directive
#
NLM_CHECK_SYM =
#
# If these are specified it will be used by the link '-flags' directive
#
NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
#
# If this is specified it will be linked in with the XDCData option in the def
# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
# by setting APACHE_UNIPROC in the environment
#
XDCDATA =
#
# If there is an NLM target, put it here
#
TARGET_nlm = \
$(OBJDIR)/speling.nlm \
$(EOLIST)
#
# If there is an LIB target, put it here
#
TARGET_lib = \
$(EOLIST)
#
# These are the OBJ files needed to create the NLM target above.
# Paths must all use the '/' character
#
FILES_nlm_objs = \
$(OBJDIR)/mod_speling.o \
$(EOLIST)
#
# These are the LIB files needed to create the NLM target above.
# These will be added as a library command in the link.opt file.
#
FILES_nlm_libs = \
libcpre.o \
$(EOLIST)
#
# These are the modules that the above NLM target depends on to load.
# These will be added as a module command in the link.opt file.
#
FILES_nlm_modules = \
aprlib \
libc \
$(EOLIST)
#
# If the nlm has a msg file, put it's path here
#
FILE_nlm_msg =
#
# If the nlm has a hlp file put it's path here
#
FILE_nlm_hlp =
#
# If this is specified, it will override $(NWOS)\copyright.txt.
#
FILE_nlm_copyright =
#
# Any additional imports go here
#
FILES_nlm_Ximports = \
@$(APR)/aprlib.imp \
@$(NWOS)/httpd.imp \
@libc.imp \
$(EOLIST)
#
# Any symbols exported to here
#
FILES_nlm_exports = \
speling_module \
$(EOLIST)
#
# These are the OBJ files needed to create the LIB target above.
# Paths must all use the '/' character
#
FILES_lib_objs = \
$(EOLIST)
#
# implement targets and dependancies (leave this section alone)
#
libs :: $(OBJDIR) $(TARGET_lib)
nlms :: libs $(TARGET_nlm)
#
# Updated this target to create necessary directories and copy files to the
# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
#
install :: nlms FORCE
#
# Any specialized rules here
#
#
# Include the 'tail' makefile that has targets that depend on variables defined
# in this makefile
#
include $(AP_WORK)\build\NWGNUtail.inc
1.1 httpd-2.0/modules/mappers/NWGNUrewrite
Index: NWGNUrewrite
===================================================================
#
# Make sure all needed macro's are defined
#
#
# Get the 'head' of the build environment if necessary. This includes default
# targets and paths to tools
#
ifndef EnvironmentDefined
include $(AP_WORK)\build\NWGNUhead.inc
endif
#
# These directories will be at the beginning of the include list, followed by
# INCDIRS
#
XINCDIRS += \
$(AP_WORK)/include \
$(NWOS) \
$(AP_WORK)/modules/arch/netware \
$(AP_WORK)/srclib/apr/include \
$(AP_WORK)/srclib/apr-util/include \
$(AP_WORK)/srclib/apr \
$(EOLIST)
#
# These flags will come after CFLAGS
#
XCFLAGS += \
$(EOLIST)
#
# These defines will come after DEFINES
#
XDEFINES += \
$(EOLIST)
#
# These flags will be added to the link.opt file
#
XLFLAGS += \
$(EOLIST)
#
# These values will be appended to the correct variables based on the value of
# RELEASE
#
ifeq "$(RELEASE)" "debug"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "noopt"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "release"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
#
# These are used by the link target if an NLM is being generated
# This is used by the link 'name' directive to name the nlm. If left blank
# TARGET_nlm (see below) will be used.
#
NLM_NAME = rewrite
#
# This is used by the link '-desc ' directive.
# If left blank, NLM_NAME will be used.
#
NLM_DESCRIPTION = Rewrite Module
#
# This is used by the '-threadname' directive. If left blank,
# NLM_NAME Thread will be used.
#
NLM_THREAD_NAME = Rewrite Module
#
# If this is specified, it will override VERSION value in
# $(AP_WORK)\build\NWGNUenvironment.inc
#
NLM_VERSION =
#
# If this is specified, it will override the default of 64K
#
NLM_STACK_SIZE = 8192
#
# If this is specified it will be used by the link '-entry' directive
#
NLM_ENTRY_SYM = _LibCPrelude
#
# If this is specified it will be used by the link '-exit' directive
#
NLM_EXIT_SYM = _LibCPostlude
#
# If this is specified it will be used by the link '-check' directive
#
NLM_CHECK_SYM =
#
# If these are specified it will be used by the link '-flags' directive
#
NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
#
# If this is specified it will be linked in with the XDCData option in the def
# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
# by setting APACHE_UNIPROC in the environment
#
XDCDATA =
#
# If there is an NLM target, put it here
#
TARGET_nlm = \
$(OBJDIR)/rewrite.nlm \
$(EOLIST)
#
# If there is an LIB target, put it here
#
TARGET_lib = \
$(EOLIST)
#
# These are the OBJ files needed to create the NLM target above.
# Paths must all use the '/' character
#
FILES_nlm_objs = \
$(OBJDIR)/mod_rewrite.o \
$(EOLIST)
#
# These are the LIB files needed to create the NLM target above.
# These will be added as a library command in the link.opt file.
#
FILES_nlm_libs = \
libcpre.o \
$(EOLIST)
#
# These are the modules that the above NLM target depends on to load.
# These will be added as a module command in the link.opt file.
#
FILES_nlm_modules = \
aprlib \
libc \
$(EOLIST)
#
# If the nlm has a msg file, put it's path here
#
FILE_nlm_msg =
#
# If the nlm has a hlp file put it's path here
#
FILE_nlm_hlp =
#
# If this is specified, it will override $(NWOS)\copyright.txt.
#
FILE_nlm_copyright =
#
# Any additional imports go here
#
FILES_nlm_Ximports = \
@$(APR)/aprlib.imp \
@$(NWOS)/httpd.imp \
@libc.imp \
$(EOLIST)
#
# Any symbols exported to here
#
FILES_nlm_exports = \
rewrite_module \
$(EOLIST)
#
# These are the OBJ files needed to create the LIB target above.
# Paths must all use the '/' character
#
FILES_lib_objs = \
$(EOLIST)
#
# implement targets and dependancies (leave this section alone)
#
libs :: $(OBJDIR) $(TARGET_lib)
nlms :: libs $(TARGET_nlm)
#
# Updated this target to create necessary directories and copy files to the
# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
#
install :: nlms FORCE
#
# Any specialized rules here
#
#
# Include the 'tail' makefile that has targets that depend on variables defined
# in this makefile
#
include $(AP_WORK)\build\NWGNUtail.inc
1.1 httpd-2.0/modules/metadata/NWGNUmimemagi
Index: NWGNUmimemagi
===================================================================
#
# Make sure all needed macro's are defined
#
#
# Get the 'head' of the build environment if necessary. This includes default
# targets and paths to tools
#
ifndef EnvironmentDefined
include $(AP_WORK)\build\NWGNUhead.inc
endif
#
# These directories will be at the beginning of the include list, followed by
# INCDIRS
#
XINCDIRS += \
$(AP_WORK)/include \
$(NWOS) \
$(AP_WORK)/modules/arch/netware \
$(AP_WORK)/srclib/apr/include \
$(AP_WORK)/srclib/apr-util/include \
$(AP_WORK)/srclib/apr \
$(EOLIST)
#
# These flags will come after CFLAGS
#
XCFLAGS += \
-prefix pre_nw.h \
$(EOLIST)
#
# These defines will come after DEFINES
#
XDEFINES += \
$(EOLIST)
#
# These flags will be added to the link.opt file
#
XLFLAGS += \
$(EOLIST)
#
# These values will be appended to the correct variables based on the value of
# RELEASE
#
ifeq "$(RELEASE)" "debug"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "noopt"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "release"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
#
# These are used by the link target if an NLM is being generated
# This is used by the link 'name' directive to name the nlm. If left blank
# TARGET_nlm (see below) will be used.
#
NLM_NAME = mimemagi
#
# This is used by the link '-desc ' directive.
# If left blank, NLM_NAME will be used.
#
NLM_DESCRIPTION = CERN Meta Module
#
# This is used by the '-threadname' directive. If left blank,
# NLM_NAME Thread will be used.
#
NLM_THREAD_NAME = CERN Meta Module
#
# If this is specified, it will override VERSION value in
# $(AP_WORK)\build\NWGNUenvironment.inc
#
NLM_VERSION =
#
# If this is specified, it will override the default of 64K
#
NLM_STACK_SIZE = 8192
#
# If this is specified it will be used by the link '-entry' directive
#
NLM_ENTRY_SYM = _LibCPrelude
#
# If this is specified it will be used by the link '-exit' directive
#
NLM_EXIT_SYM = _LibCPostlude
#
# If this is specified it will be used by the link '-check' directive
#
NLM_CHECK_SYM =
#
# If these are specified it will be used by the link '-flags' directive
#
NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
#
# If this is specified it will be linked in with the XDCData option in the def
# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
# by setting APACHE_UNIPROC in the environment
#
XDCDATA =
#
# If there is an NLM target, put it here
#
TARGET_nlm = \
$(OBJDIR)/mimemagi.nlm \
$(EOLIST)
#
# If there is an LIB target, put it here
#
TARGET_lib = \
$(EOLIST)
#
# These are the OBJ files needed to create the NLM target above.
# Paths must all use the '/' character
#
FILES_nlm_objs = \
$(OBJDIR)/mod_mime_magic.o \
$(EOLIST)
#
# These are the LIB files needed to create the NLM target above.
# These will be added as a library command in the link.opt file.
#
FILES_nlm_libs = \
libcpre.o \
$(EOLIST)
#
# These are the modules that the above NLM target depends on to load.
# These will be added as a module command in the link.opt file.
#
FILES_nlm_modules = \
aprlib \
libc \
$(EOLIST)
#
# If the nlm has a msg file, put it's path here
#
FILE_nlm_msg =
#
# If the nlm has a hlp file put it's path here
#
FILE_nlm_hlp =
#
# If this is specified, it will override $(NWOS)\copyright.txt.
#
FILE_nlm_copyright =
#
# Any additional imports go here
#
FILES_nlm_Ximports = \
@$(APR)/aprlib.imp \
@$(NWOS)/httpd.imp \
@libc.imp \
$(EOLIST)
#
# Any symbols exported to here
#
FILES_nlm_exports = \
mime_magic_module \
$(EOLIST)
#
# These are the OBJ files needed to create the LIB target above.
# Paths must all use the '/' character
#
FILES_lib_objs = \
$(EOLIST)
#
# implement targets and dependancies (leave this section alone)
#
libs :: $(OBJDIR) $(TARGET_lib)
nlms :: libs $(TARGET_nlm)
#
# Updated this target to create necessary directories and copy files to the
# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
#
install :: nlms FORCE
#
# Any specialized rules here
#
#
# Include the 'tail' makefile that has targets that depend on variables defined
# in this makefile
#
include $(AP_WORK)\build\NWGNUtail.inc
1.1 httpd-2.0/build/NWGNUmakefile
Index: NWGNUmakefile
===================================================================
#
# Declare the sub-directories to be built here
#
SUBDIRS = \
$(EOLIST)
#
# Get the 'head' of the build environment. This includes default targets and
# paths to tools
#
include $(AP_WORK)\build\NWGNUhead.inc
#
# build this level's files
FILES_prebuild_headers = \
$(APR)/include/apr.h \
$(APRUTIL)/include/apu.h \
$(APRUTIL)/include/apr_ldap.h \
$(PCRE)/config.h \
$(PCRE)/pcre.h \
$(EOLIST)
nlms :: $(NWOS)/httpd.imp
$(NWOS)/httpd.imp : make_nw_export.awk nw_export.i
@echo Generating $(subst /,\,$@)
awk -f make_nw_export.awk nw_export.i | sort >$(NWOS)/httpd.imp
nw_export.i : nw_export.inc $(FILES_prebuild_headers) cc.opt
@echo Generating $(subst /,\,$@)
$(CC) $< @cc.opt
cc.opt : NWGNUmakefile $(AP_WORK)\build\NWGNUenvironment.inc $(AP_WORK)\build\NWGNUtail.inc $(AP_WORK)\build\NWGNUhead.inc
$(CHK) $@ $(DEL) $@
@echo -P >> $@
@echo -EP >> $@
@echo -nosyspath >> $@
@echo -w nocmdline >> $@
@echo -DNETWARE >> $@
@echo -DCORE_PRIVATE >> $@
@echo -I..\include >> $@
@echo -I..\modules\http >> $@
@echo -I..\os\netware >> $@
@echo -I..\server\mpm\netware >> $@
@echo -I..\srclib\apr\include >> $@
@echo -I..\srclib\apr-util\include >> $@
@echo -ir $(NOVELLLIBC) >> $@
$(APR)/include/%.h: $(subst /,\,$(APR))\include\%.hnw
@echo Creating $(subst /,\,$@)
copy $< $(subst /,\,$(APR))\include\$(@F)
$(APRUTIL)/include/%.h: $(subst /,\,$(APRUTIL))\include\%.hnw
@echo Creating $(subst /,\,$@)
copy $< $(subst /,\,$(APRUTIL))\include\$(@F)
$(PCRE)/%.h: $(subst /,\,$(PCRE))\%.hw
@echo Creating $(subst /,\,$@)
copy $< $(subst /,\,$(PCRE))\$(@F)
#
# You can use this target if all that is needed is to copy files to the
# installation area
#
install :: nlms FORCE
clean ::
$(CHK) nw_export.i $(DEL) nw_export.i
$(CHK) cc.opt $(DEL) cc.opt
$(CHK) $(subst /,\,$(APR))\include\apr.h $(DEL) $(subst /,\,$(APR))\include\apr.h
$(CHK) $(subst /,\,$(APRUTIL))\include\apu.h $(DEL) $(subst /,\,$(APRUTIL))\include\apu.h
$(CHK) $(subst /,\,$(APRUTIL))\include\apr_ldap.h $(DEL) $(subst /,\,$(APRUTIL))\include\apr_ldap.h
$(CHK) $(subst /,\,$(PCRE))\config.h $(DEL) $(subst /,\,$(PCRE))\config.h
$(CHK) $(subst /,\,$(PCRE))\pcre.h $(DEL) $(subst /,\,$(PCRE))\pcre.h
$(CHK) $(subst /,\,$(NWOS))\httpd.imp $(DEL) $(subst /,\,$(NWOS))\httpd.imp
1.1 httpd-2.0/modules/aaa/NWGNUmakefile
Index: NWGNUmakefile
===================================================================
#
# Declare the sub-directories to be built here
#
SUBDIRS = \
$(EOLIST)
#
# Get the 'head' of the build environment. This includes default targets and
# paths to tools
#
include $(AP_WORK)\build\NWGNUhead.inc
#
# build this level's files
#
# Make sure all needed macro's are defined
#
#
# These directories will be at the beginning of the include list, followed by
# INCDIRS
#
XINCDIRS += \
$(EOLIST)
#
# These flags will come after CFLAGS
#
XCFLAGS += \
$(EOLIST)
#
# These defines will come after DEFINES
#
XDEFINES += \
$(EOLIST)
#
# These flags will be added to the link.opt file
#
XLFLAGS += \
$(EOLIST)
#
# These values will be appended to the correct variables based on the value of
# RELEASE
#
ifeq "$(RELEASE)" "debug"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "noopt"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "release"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
#
# These are used by the link target if an NLM is being generated
# This is used by the link 'name' directive to name the nlm. If left blank
# TARGET_nlm (see below) will be used.
#
NLM_NAME =
#
# This is used by the link '-desc ' directive.
# If left blank, NLM_NAME will be used.
#
NLM_DESCRIPTION =
#
# This is used by the '-threadname' directive. If left blank,
# NLM_NAME Thread will be used.
#
NLM_THREAD_NAME =
#
# If this is specified, it will override VERSION value in
# $(AP_WORK)\build\NWGNUenvironment.inc
#
NLM_VERSION =
#
# If this is specified, it will override the default of 64K
#
NLM_STACK_SIZE =
#
# If this is specified it will be used by the link '-entry' directive
#
NLM_ENTRY_SYM =
#
# If this is specified it will be used by the link '-exit' directive
#
NLM_EXIT_SYM =
#
# If this is specified it will be used by the link '-check' directive
#
NLM_CHECK_SYM =
#
# If these are specified it will be used by the link '-flags' directive
#
NLM_FLAGS =
#
# If this is specified it will be linked in with the XDCData option in the def
# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
# by setting APACHE_UNIPROC in the environment
#
XDCDATA =
#
# If there is an NLM target, put it here
#
TARGET_nlm = \
$(OBJDIR)/authanon.nlm \
$(OBJDIR)/authdbm.nlm \
$(OBJDIR)/digest.nlm \
$(EOLIST)
#
# If there is an LIB target, put it here
#
TARGET_lib = \
$(EOLIST)
#
# These are the OBJ files needed to create the NLM target above.
# Paths must all use the '/' character
#
FILES_nlm_objs = \
$(EOLIST)
#
# These are the LIB files needed to create the NLM target above.
# These will be added as a library command in the link.opt file.
#
FILES_nlm_libs = \
$(EOLIST)
#
# These are the modules that the above NLM target depends on to load.
# These will be added as a module command in the link.opt file.
#
FILES_nlm_modules = \
$(EOLIST)
#
# If the nlm has a msg file, put it's path here
#
FILE_nlm_msg =
#
# If the nlm has a hlp file put it's path here
#
FILE_nlm_hlp =
#
# If this is specified, it will override $(NWOS)\copyright.txt.
#
FILE_nlm_copyright =
#
# Any additional imports go here
#
FILES_nlm_Ximports = \
$(EOLIST)
#
# Any symbols exported to here
#
FILES_nlm_exports = \
$(EOLIST)
#
# These are the OBJ files needed to create the LIB target above.
# Paths must all use the '/' character
#
FILES_lib_objs = \
$(EOLIST)
#
# implement targets and dependancies (leave this section alone)
#
libs :: $(OBJDIR) $(TARGET_lib)
nlms :: libs $(TARGET_nlm)
#
# Updated this target to create necessary directories and copy files to the
# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
#
install :: nlms FORCE
copy $(OBJDIR)\*.nlm $(INSTALL)\Apache2\modules\*.*
#
# Any specialized rules here
#
#
# Include the 'tail' makefile that has targets that depend on variables defined
# in this makefile
#
include $(AP_WORK)\build\NWGNUtail.inc
1.1 httpd-2.0/modules/dav/fs/NWGNUmakefile
Index: NWGNUmakefile
===================================================================
#
# Declare the sub-directories to be built here
#
SUBDIRS = \
$(EOLIST)
#
# Get the 'head' of the build environment. This includes default targets and
# paths to tools
#
include $(AP_WORK)\build\NWGNUhead.inc
#
# build this level's files
#
# Make sure all needed macro's are defined
#
#
# These directories will be at the beginning of the include list, followed by
# INCDIRS
#
XINCDIRS += \
$(AP_WORK)/srclib/apr/include \
$(AP_WORK)/srclib/include/arch/NetWare \
$(AP_WORK)/srclib/apr-util/include \
$(AP_WORK)/include \
$(AP_WORK)/os/NetWare \
$(AP_WORK)/server/mpm/NetWare \
$(AP_WORK)/srclib/pcre \
$(AP_WORK)/modules/dav/main \
$(NWOS) \
$(EOLIST)
#
# These flags will come after CFLAGS
#
XCFLAGS += \
$(EOLIST)
#
# These defines will come after DEFINES
#
XDEFINES += \
$(EOLIST)
#
# These flags will be added to the link.opt file
#
XLFLAGS += \
XDCData $(NWOS)\apache.xdc \
$(EOLIST)
#
# These values will be appended to the correct variables based on the value of
# RELEASE
#
ifeq "$(RELEASE)" "debug"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "noopt"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "release"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
#
# These are used by the link target if an NLM is being generated
# This is used by the link 'name' directive to name the nlm. If left blank
# TARGET_nlm (see below) will be used.
#
NLM_NAME = modDAVFS
#
# This is used by the link '-desc ' directive.
# If left blank, NLM_NAME will be used.
#
NLM_DESCRIPTION = Apache DAV_FS module
#
# This is used by the '-threadname' directive. If left blank,
# NLM_NAME Thread will be used.
#
NLM_THREAD_NAME = modDAVFS Thread
#
# If this is specified, it will override VERSION value in
# $(AP_WORK)\build\NWGNUenvironment.inc
#
NLM_VERSION =
#
# If this is specified, it will override the default of 64K
#
NLM_STACK_SIZE = 65536
#
# If this is specified it will be used by the link '-entry' directive
#
NLM_ENTRY_SYM = _LibCPrelude
#
# If this is specified it will be used by the link '-exit' directive
#
NLM_EXIT_SYM = _LibCPostlude
#
# If this is specified it will be used by the link '-check' directive
#
NLM_CHECK_SYM =
#
# If this is specified it will be used by the link '-flags' directive
#
NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
#
# Declare all target files (you must add your files here)
#
#
# If there is an NLM target, put it here
#
TARGET_nlm = \
$(OBJDIR)/moddavfs.nlm \
$(EOLIST)
#
# If there is an LIB target, put it here
#
TARGET_lib = \
$(EOLIST)
#
# These are the OBJ files needed to create the NLM target above.
# Paths must all use the '/' character
#
FILES_nlm_objs = \
$(OBJDIR)/mod_dav_fs.o \
$(OBJDIR)/dbm.o \
$(OBJDIR)/lock.o \
$(OBJDIR)/repos.o \
$(OBJDIR)/libprews.o \
$(EOLIST)
#
# These are the LIB files needed to create the NLM target above.
# These will be added as a library command in the link.opt file.
#
FILES_nlm_libs = \
libcpre.o \
$(EOLIST)
#
# These are the modules that the above NLM target depends on to load.
# These will be added as a module command in the link.opt file.
#
FILES_nlm_modules = \
Apache2 \
Libc \
$(EOLIST)
#
# If the nlm has a msg file, put it's path here
#
FILE_nlm_msg =
#
# If the nlm has a hlp file put it's path here
#
FILE_nlm_hlp =
#
# If this is specified, it will override $(NWOS)\copyright.txt.
#
FILE_nlm_copyright =
#
# Any additional imports go here
#
FILES_nlm_Ximports = \
@libc.imp \
@$(APR)/aprlib.imp \
@httpd.imp \
@ws2nlm.imp \
@../main/dav.imp \
$(EOLIST)
#
# Any symbols exported to here
#
FILES_nlm_exports = \
dav_fs_module \
$(EOLIST)
#
# These are the OBJ files needed to create the LIB target above.
# Paths must all use the '/' character
#
FILES_lib_objs = \
$(EOLIST)
#
# implement targets and dependancies (leave this section alone)
#
libs :: $(OBJDIR) $(TARGET_lib)
nlms :: libs $(TARGET_nlm)
#
# Updated this target to create necessary directories and copy files to the
# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
#
install :: nlms FORCE
copy $(OBJDIR)\moddavfs.nlm $(INSTALL)\Apache2\modules
#
# Any specialized rules here
#
$(OBJDIR)/%.o: ../../arch/netware/%.c $(OBJDIR)\cc.opt
@echo compiling $<
$(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
#
# Include the 'tail' makefile that has targets that depend on variables defined
# in this makefile
#
include $(AP_WORK)\build\NWGNUtail.inc
1.1 httpd-2.0/modules/dav/main/NWGNUmakefile
Index: NWGNUmakefile
===================================================================
#
# Declare the sub-directories to be built here
#
SUBDIRS = \
$(EOLIST)
#
# Get the 'head' of the build environment. This includes default targets and
# paths to tools
#
include $(AP_WORK)\build\NWGNUhead.inc
#
# build this level's files
#
# Make sure all needed macro's are defined
#
#
# These directories will be at the beginning of the include list, followed by
# INCDIRS
#
XINCDIRS += \
$(AP_WORK)/srclib/apr/include \
$(AP_WORK)/srclib/include/arch/NetWare \
$(AP_WORK)/srclib/apr-util/include \
$(AP_WORK)/include \
$(AP_WORK)/os/NetWare \
$(AP_WORK)/server/mpm/NetWare \
$(AP_WORK)/srclib/pcre \
$(NWOS) \
$(EOLIST)
#
# These flags will come after CFLAGS
#
XCFLAGS += \
$(EOLIST)
#
# These defines will come after DEFINES
#
XDEFINES += \
$(EOLIST)
#
# These flags will be added to the link.opt file
#
XLFLAGS += \
$(EOLIST)
#
# These values will be appended to the correct variables based on the value of
# RELEASE
#
ifeq "$(RELEASE)" "debug"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "noopt"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
ifeq "$(RELEASE)" "release"
XINCDIRS += \
$(EOLIST)
XCFLAGS += \
$(EOLIST)
XDEFINES += \
$(EOLIST)
XLFLAGS += \
$(EOLIST)
endif
#
# These are used by the link target if an NLM is being generated
# This is used by the link 'name' directive to name the nlm. If left blank
# TARGET_nlm (see below) will be used.
#
NLM_NAME = mod_DAV
#
# This is used by the link '-desc ' directive.
# If left blank, NLM_NAME will be used.
#
NLM_DESCRIPTION = Apache DAV module
#
# This is used by the '-threadname' directive. If left blank,
# NLM_NAME Thread will be used.
#
NLM_THREAD_NAME = mod_DAV
#
# If this is specified, it will override VERSION value in
# $(AP_WORK)\build\NWGNUenvironment.inc
#
NLM_VERSION =
#
# If this is specified, it will override the default of 64K
#
NLM_STACK_SIZE = 65536
#
# If this is specified it will be used by the link '-entry' directive
#
NLM_ENTRY_SYM = _LibCPrelude
#
# If this is specified it will be used by the link '-exit' directive
#
NLM_EXIT_SYM = _LibCPostlude
#
# If this is specified it will be used by the link '-check' directive
#
NLM_CHECK_SYM =
#
# If this is specified it will be used by the link '-flags' directive
#
NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
#
# If this is specified it will be linked in with the XDCData option in the def
# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
# by setting APACHE_UNIPROC in the environment
#
XDCDATA =
#
# Declare all target files (you must add your files here)
#
#
# If there is an NLM target, put it here
#
TARGET_nlm = \
$(OBJDIR)/mod_dav.nlm \
$(EOLIST)
#
# If there is an LIB target, put it here
#
TARGET_lib = \
$(EOLIST)
#
# These are the OBJ files needed to create the NLM target above.
# Paths must all use the '/' character
#
FILES_nlm_objs = \
$(OBJDIR)/mod_dav.o \
$(OBJDIR)/props.o \
$(OBJDIR)/util.o \
$(OBJDIR)/util_lock.o \
$(OBJDIR)/liveprop.o \
$(OBJDIR)/providers.o \
$(OBJDIR)/std_liveprop.o \
$(EOLIST)
#
# These are the LIB files needed to create the NLM target above.
# These will be added as a library command in the link.opt file.
#
FILES_nlm_libs = \
libcpre.o \
$(EOLIST)
#
# These are the modules that the above NLM target depends on to load.
# These will be added as a module command in the link.opt file.
#
FILES_nlm_modules = \
Apache2 \
Libc \
$(EOLIST)
#
# If the nlm has a msg file, put it's path here
#
FILE_nlm_msg =
#
# If the nlm has a hlp file put it's path here
#
FILE_nlm_hlp =
#
# If this is specified, it will override $(NWOS)\copyright.txt.
#
FILE_nlm_copyright =
#
# Any additional imports go here
#
FILES_nlm_Ximports = \
@libc.imp \
@$(APR)/aprlib.imp \
@httpd.imp \
$(EOLIST)
#
# Any symbols exported to here
#
FILES_nlm_exports = \
dav_module \
@dav.imp \
$(EOLIST)
#
# These are the OBJ files needed to create the LIB target above.
# Paths must all use the '/' character
#
FILES_lib_objs = \
$(EOLIST)
#
# implement targets and dependancies (leave this section alone)
#
libs :: $(OBJDIR) $(TARGET_lib)
nlms :: libs $(TARGET_nlm)
#
# Updated this target to create necessary directories and copy files to the
# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
#
install :: nlms FORCE
copy $(OBJDIR)\mod_dav.nlm $(INSTALL)\Apache2\modules\*.*
#
# Any specialized rules here
#
#
# Include the 'tail' makefile that has targets that depend on variables defined
# in this makefile
#
include $(AP_WORK)\build\NWGNUtail.inc