You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@vcl.apache.org by Josh Thompson <jo...@ncsu.edu> on 2010/09/23 00:47:46 UTC
[VOTE] release VCL 2.2 - voting based on RC2
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm starting a different thread to vote again based on RC2 to make it easier
to tally votes.
This is basically the same email as before except with RC1 changed to RC2.
There were a few JIRA issues touched for RC2. VCL-386 was a completely new
one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
code modified related to them
I created a release artifact based off of trunk. I copied trunk to a tag
under the tags area of the repo that is named release-2.2-RC2:
http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
The artifact is an export from that tag with the addition of Dojo Toolkit
version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
my GPG signature of it are available from my space on people.a.o:
http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
The list of resolved JIRA issues associated with this release can be found on
the VCL 2.2 release page:
http://cwiki.apache.org/VCL/vcl-22-unreleased.html
Installation instructions are on the Confluence site and in the INSTALLATION
file included in the artifact.
Aaron, Andy, and I have completed a test install of all parts and were able to
successfully create and capture a base image.
The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
incubating". Licensing information about perl and its required modules, php
and its required modules, and mysql are stated as "system requirements"
according to the information under "System Requirements" on
http://www.apache.org/legal/3party.html.
Please vote by the end of the day on Monday, Sept. 27th to publish this
release (this allows for 3 business days to vote). Please note that anyone in
the VCL community is allowed to vote.
[ ] +1 yes, release VCL 2.2
[ ] 0 dunno
[ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
Josh
- --
- -------------------------------
Josh Thompson
Systems Programmer
Virtual Computing Lab (VCL)
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at www.keyserver.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
CU/ElAKOl8VlBzChNdDlTOw=
=kXRB
-----END PGP SIGNATURE-----
RE: [VOTE] release VCL 2.2 - voting based on RC2
Posted by "Waldron, Michael H" <mw...@email.unc.edu>.
+1
Mike Waldron
Systems Specialist
ITS Research Computing
University of North Carolina at Chapel Hill
CB #3420, ITS Manning, Rm 2509
919-962-9778
-----Original Message-----
From: Josh Thompson [mailto:josh_thompson@ncsu.edu]
Sent: Wednesday, September 22, 2010 6:48 PM
To: vcl-dev@incubator.apache.org; Matt Hogstrom; Alan D. Cabrera
Subject: [VOTE] release VCL 2.2 - voting based on RC2
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm starting a different thread to vote again based on RC2 to make it easier
to tally votes.
This is basically the same email as before except with RC1 changed to RC2.
There were a few JIRA issues touched for RC2. VCL-386 was a completely new
one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
code modified related to them
I created a release artifact based off of trunk. I copied trunk to a tag
under the tags area of the repo that is named release-2.2-RC2:
http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
The artifact is an export from that tag with the addition of Dojo Toolkit
version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
my GPG signature of it are available from my space on people.a.o:
http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
The list of resolved JIRA issues associated with this release can be found on
the VCL 2.2 release page:
http://cwiki.apache.org/VCL/vcl-22-unreleased.html
Installation instructions are on the Confluence site and in the INSTALLATION
file included in the artifact.
Aaron, Andy, and I have completed a test install of all parts and were able to
successfully create and capture a base image.
The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
incubating". Licensing information about perl and its required modules, php
and its required modules, and mysql are stated as "system requirements"
according to the information under "System Requirements" on
http://www.apache.org/legal/3party.html.
Please vote by the end of the day on Monday, Sept. 27th to publish this
release (this allows for 3 business days to vote). Please note that anyone in
the VCL community is allowed to vote.
[ ] +1 yes, release VCL 2.2
[ ] 0 dunno
[ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
Josh
- --
- -------------------------------
Josh Thompson
Systems Programmer
Virtual Computing Lab (VCL)
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at www.keyserver.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
CU/ElAKOl8VlBzChNdDlTOw=
=kXRB
-----END PGP SIGNATURE-----
RE: [VOTE] release VCL 2.2 - voting based on RC2
Posted by "Miller, Fred Anthony" <MI...@ecu.edu>.
+1
--
Tony Miller
Technology Consultant
Academic Technologies
millerf@ecu.edu /\ http://blog.ecu.edu/techtips
-----Original Message-----
From: Josh Thompson [mailto:josh_thompson@ncsu.edu]
Sent: Wednesday, September 22, 2010 6:48 PM
To: vcl-dev@incubator.apache.org; Matt Hogstrom; Alan D. Cabrera
Subject: [VOTE] release VCL 2.2 - voting based on RC2
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm starting a different thread to vote again based on RC2 to make it easier
to tally votes.
This is basically the same email as before except with RC1 changed to RC2.
There were a few JIRA issues touched for RC2. VCL-386 was a completely new
one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
code modified related to them
I created a release artifact based off of trunk. I copied trunk to a tag
under the tags area of the repo that is named release-2.2-RC2:
http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
The artifact is an export from that tag with the addition of Dojo Toolkit
version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
my GPG signature of it are available from my space on people.a.o:
http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
The list of resolved JIRA issues associated with this release can be found on
the VCL 2.2 release page:
http://cwiki.apache.org/VCL/vcl-22-unreleased.html
Installation instructions are on the Confluence site and in the INSTALLATION
file included in the artifact.
Aaron, Andy, and I have completed a test install of all parts and were able to
successfully create and capture a base image.
The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
incubating". Licensing information about perl and its required modules, php
and its required modules, and mysql are stated as "system requirements"
according to the information under "System Requirements" on
http://www.apache.org/legal/3party.html.
Please vote by the end of the day on Monday, Sept. 27th to publish this
release (this allows for 3 business days to vote). Please note that anyone in
the VCL community is allowed to vote.
[ ] +1 yes, release VCL 2.2
[ ] 0 dunno
[ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
Josh
- --
- -------------------------------
Josh Thompson
Systems Programmer
Virtual Computing Lab (VCL)
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at www.keyserver.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
CU/ElAKOl8VlBzChNdDlTOw=
=kXRB
-----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Xianqing Yu <yu...@hotmail.com>.
+1
Thanks,
Xianqing Yu
Graduate Student
Department of Computer Science
North Carolina State University
E-mail: xyu6@ncsu.edu
On Sep 22, 2010, at 6:47 PM, Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules, php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
>
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by "Alan D. Cabrera" <li...@toolazydogs.com>.
+1
Regards,
Alan
On Sep 22, 2010, at 3:47 PM, Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules, php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Andy Kurth <an...@ncsu.edu>.
+1
Thanks Josh.
-Andy
Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules, php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by "Creech, David" <CR...@ecu.edu>.
+1
David Creech
Sent from my iPhone
On Sep 22, 2010, at 6:48 PM, "Josh Thompson" <jo...@ncsu.edu> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules, php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Gabriel Muñoz <ga...@gmail.com>.
+1
Gabriel Muñoz
Argentina
On Wed, Sep 22, 2010 at 8:50 PM, Alexander Patterson
<al...@csueastbay.edu> wrote:
> + 1
>
> On Wed, Sep 22, 2010 at 3:47 PM, Josh Thompson <jo...@ncsu.edu>wrote:
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> I'm starting a different thread to vote again based on RC2 to make it
>> easier
>> to tally votes.
>>
>> This is basically the same email as before except with RC1 changed to RC2.
>> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
>> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
>> code modified related to them
>>
>> I created a release artifact based off of trunk. I copied trunk to a tag
>> under the tags area of the repo that is named release-2.2-RC2:
>>
>> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>>
>> The artifact is an export from that tag with the addition of Dojo Toolkit
>> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
>> and
>> my GPG signature of it are available from my space on people.a.o:
>>
>> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/<http://people.apache.org/%7Ejfthomps/apache-VCL-2.2-RC2-incubating/>
>>
>> The list of resolved JIRA issues associated with this release can be found
>> on
>> the VCL 2.2 release page:
>>
>> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>>
>> Installation instructions are on the Confluence site and in the
>> INSTALLATION
>> file included in the artifact.
>>
>> Aaron, Andy, and I have completed a test install of all parts and were able
>> to
>> successfully create and capture a base image.
>>
>> The directory created by extracting the RC1 artifact is
>> "apache-VCL-2.2-RC2-
>> incubating". Licensing information about perl and its required modules,
>> php
>> and its required modules, and mysql are stated as "system requirements"
>> according to the information under "System Requirements" on
>> http://www.apache.org/legal/3party.html.
>>
>> Please vote by the end of the day on Monday, Sept. 27th to publish this
>> release (this allows for 3 business days to vote). Please note that anyone
>> in
>> the VCL community is allowed to vote.
>>
>> [ ] +1 yes, release VCL 2.2
>> [ ] 0 dunno
>> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>>
>> Josh
>> - --
>> - -------------------------------
>> Josh Thompson
>> Systems Programmer
>> Virtual Computing Lab (VCL)
>> North Carolina State University
>>
>> Josh_Thompson@ncsu.edu
>> 919-515-5323
>>
>> my GPG/PGP key can be found at www.keyserver.net
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v2.0.14 (GNU/Linux)
>>
>> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
>> CU/ElAKOl8VlBzChNdDlTOw=
>> =kXRB
>> -----END PGP SIGNATURE-----
>>
>
>
>
> --
> Thanks,
> Alex Patterson
> User Support Services
> Operating System Analyst
> California State University, East Bay
>
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Alexander Patterson <al...@csueastbay.edu>.
+ 1
On Wed, Sep 22, 2010 at 3:47 PM, Josh Thompson <jo...@ncsu.edu>wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it
> easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
> and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/<http://people.apache.org/%7Ejfthomps/apache-VCL-2.2-RC2-incubating/>
>
> The list of resolved JIRA issues associated with this release can be found
> on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the
> INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able
> to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is
> "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules,
> php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone
> in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
>
--
Thanks,
Alex Patterson
User Support Services
Operating System Analyst
California State University, East Bay
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Milen P Paskov <mp...@us.ibm.com>.
+1
Best Regards,
Milen Paskov
WSTI Intern
mppaskov@us.ibm.com
|------------>
| From: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|Josh Thompson <jo...@ncsu.edu> |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| To: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|vcl-dev@incubator.apache.org, Matt Hogstrom <ma...@hogstrom.org>, "Alan D. Cabrera" <li...@toolazydogs.com> |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Date: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|09/22/2010 06:48 PM |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Subject: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|[VOTE] release VCL 2.2 - voting based on RC2 |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm starting a different thread to vote again based on RC2 to make it
easier
to tally votes.
This is basically the same email as before except with RC1 changed to RC2.
There were a few JIRA issues touched for RC2. VCL-386 was a completely new
one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
code modified related to them
I created a release artifact based off of trunk. I copied trunk to a tag
under the tags area of the repo that is named release-2.2-RC2:
http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
The artifact is an export from that tag with the addition of Dojo Toolkit
version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
and
my GPG signature of it are available from my space on people.a.o:
http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
The list of resolved JIRA issues associated with this release can be found
on
the VCL 2.2 release page:
http://cwiki.apache.org/VCL/vcl-22-unreleased.html
Installation instructions are on the Confluence site and in the
INSTALLATION
file included in the artifact.
Aaron, Andy, and I have completed a test install of all parts and were able
to
successfully create and capture a base image.
The directory created by extracting the RC1 artifact is
"apache-VCL-2.2-RC2-
incubating". Licensing information about perl and its required modules,
php
and its required modules, and mysql are stated as "system requirements"
according to the information under "System Requirements" on
http://www.apache.org/legal/3party.html.
Please vote by the end of the day on Monday, Sept. 27th to publish this
release (this allows for 3 business days to vote). Please note that anyone
in
the VCL community is allowed to vote.
[ ] +1 yes, release VCL 2.2
[ ] 0 dunno
[ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
Josh
- --
- -------------------------------
Josh Thompson
Systems Programmer
Virtual Computing Lab (VCL)
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at www.keyserver.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
CU/ElAKOl8VlBzChNdDlTOw=
=kXRB
-----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Henry E Schaffer <he...@unity.ncsu.edu>.
+1
--henry schaffer
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Josh Thompson <jo...@ncsu.edu>.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
+1
On Wed September 22 2010 6:47:46 pm Josh Thompson wrote:
> I'm starting a different thread to vote again based on RC2 to make it
> easier to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
> and my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found
> on the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the
> INSTALLATION file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able
> to successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is
> "apache-VCL-2.2-RC2- incubating". Licensing information about perl and
> its required modules, php and its required modules, and mysql are stated
> as "system requirements" according to the information under "System
> Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone
> in the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
>
- --
- -------------------------------
Josh Thompson
Systems Programmer
Virtual Computing Lab (VCL)
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at www.keyserver.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iD8DBQFMmpGgV/LQcNdtPQMRArJuAJ0dcsCUmcPynJv1pOwB038+yaWxXQCfR/uh
t5q+U7adGEog8O5joSg/J0Y=
=SL01
-----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Gagan Aneja <ga...@csueastbay.edu>.
1++
Thanks,
Gagan Aneja
CSU, East Bay
On Thu, Sep 23, 2010 at 7:33 AM, Xianqing Yu <yu...@hotmail.com>wrote:
> +1
>
> Thanks,
>
> Xianqing Yu
> Graduate Student
> Department of Computer Science
> North Carolina State University
> E-mail: xyu6@ncsu.edu
> On Sep 22, 2010, at 6:47 PM, Josh Thompson wrote:
>
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > I'm starting a different thread to vote again based on RC2 to make it
> easier
> > to tally votes.
> >
> > This is basically the same email as before except with RC1 changed to
> RC2.
> > There were a few JIRA issues touched for RC2. VCL-386 was a completely
> new
> > one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but
> had
> > code modified related to them
> >
> > I created a release artifact based off of trunk. I copied trunk to a tag
> > under the tags area of the repo that is named release-2.2-RC2:
> >
> > http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
> >
> > The artifact is an export from that tag with the addition of Dojo Toolkit
> > version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
> and
> > my GPG signature of it are available from my space on people.a.o:
> >
> > http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
> >
> > The list of resolved JIRA issues associated with this release can be
> found on
> > the VCL 2.2 release page:
> >
> > http://cwiki.apache.org/VCL/vcl-22-unreleased.html
> >
> > Installation instructions are on the Confluence site and in the
> INSTALLATION
> > file included in the artifact.
> >
> > Aaron, Andy, and I have completed a test install of all parts and were
> able to
> > successfully create and capture a base image.
> >
> > The directory created by extracting the RC1 artifact is
> "apache-VCL-2.2-RC2-
> > incubating". Licensing information about perl and its required modules,
> php
> > and its required modules, and mysql are stated as "system requirements"
> > according to the information under "System Requirements" on
> > http://www.apache.org/legal/3party.html.
> >
> > Please vote by the end of the day on Monday, Sept. 27th to publish this
> > release (this allows for 3 business days to vote). Please note that
> anyone in
> > the VCL community is allowed to vote.
> >
> > [ ] +1 yes, release VCL 2.2
> > [ ] 0 dunno
> > [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
> >
> > Josh
> > - --
> > - -------------------------------
> > Josh Thompson
> > Systems Programmer
> > Virtual Computing Lab (VCL)
> > North Carolina State University
> >
> > Josh_Thompson@ncsu.edu
> > 919-515-5323
> >
> > my GPG/PGP key can be found at www.keyserver.net
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v2.0.14 (GNU/Linux)
> >
> > iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> > CU/ElAKOl8VlBzChNdDlTOw=
> > =kXRB
> > -----END PGP SIGNATURE-----
> >
>
>
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Xianqing Yu <yu...@hotmail.com>.
+1
Thanks,
Xianqing Yu
Graduate Student
Department of Computer Science
North Carolina State University
E-mail: xyu6@ncsu.edu
On Sep 22, 2010, at 6:47 PM, Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules, php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
>
Re: [RESULT][VOTE] release VCL 2.2 - voting based on RC2
Posted by "Alan D. Cabrera" <li...@toolazydogs.com>.
IIUC, there's no need for an additional vote given that you have three positive votes from IPMC members. All you need to do is announce the results of our vote and wait 72 hours.
Regards,
Alan
On Sep 28, 2010, at 11:15 AM, Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Based on the following votes, the Apache VCL community has voted to release
> Apache VCL 2.2:
>
> +1 David Creech
> +1 Andy Kurth
> +1 Josh Thompson
> +1 Alexander Patterson
> +1 Gabriel Muñoz
> +1 Henry Schaffer
> +1 Mike Waldron
> +1 Aaron Peeler
> +1 Vinay Venkatesh
> +1 Milen Paskov
> +1 Xianqing Yu
> +1 Gagan Aneja
> +1 Tony Miller
> +1 Kevan Miller
> +1 Matt Hogstrom
> +1 Alan Cabrera
>
> That totals +16. The next step is for me to send an email to the general
> incubator email list asking that the Incubator PMC vote on releasing Apache
> VCL 2.2. I should have that email composed and sent this afternoon.
>
> FYI - To pass, there must be at least three +1 votes cast by Incubator PMC
> members with the majority of them being positive. If you want to follow the
> vote process there, the archives for the general incubator list are here:
>
> http://mail-archives.apache.org/mod_mbox/incubator-general/
>
> Josh
>
>
> On Wed September 22 2010 6:47:46 pm Josh Thompson wrote:
>> I'm starting a different thread to vote again based on RC2 to make it
>> easier to tally votes.
>>
>> This is basically the same email as before except with RC1 changed to RC2.
>> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
>> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
>> code modified related to them
>>
>> I created a release artifact based off of trunk. I copied trunk to a tag
>> under the tags area of the repo that is named release-2.2-RC2:
>>
>> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>>
>> The artifact is an export from that tag with the addition of Dojo Toolkit
>> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
>> and my GPG signature of it are available from my space on people.a.o:
>>
>> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>>
>> The list of resolved JIRA issues associated with this release can be found
>> on the VCL 2.2 release page:
>>
>> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>>
>> Installation instructions are on the Confluence site and in the
>> INSTALLATION file included in the artifact.
>>
>> Aaron, Andy, and I have completed a test install of all parts and were able
>> to successfully create and capture a base image.
>>
>> The directory created by extracting the RC1 artifact is
>> "apache-VCL-2.2-RC2- incubating". Licensing information about perl and
>> its required modules, php and its required modules, and mysql are stated
>> as "system requirements" according to the information under "System
>> Requirements" on
>> http://www.apache.org/legal/3party.html.
>>
>> Please vote by the end of the day on Monday, Sept. 27th to publish this
>> release (this allows for 3 business days to vote). Please note that anyone
>> in the VCL community is allowed to vote.
>>
>> [ ] +1 yes, release VCL 2.2
>> [ ] 0 dunno
>> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>>
>> Josh
>>
>
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMojDaV/LQcNdtPQMRAp1VAJ9fm7h8aUh5LdtjIvubRZY6sv0gqACfVO3g
> IuFm1G+tsjIM+dDMDLxZdWY=
> =fCtD
> -----END PGP SIGNATURE-----
Re: [RESULT][VOTE] release VCL 2.2 - voting based on RC2
Posted by Josh Thompson <jo...@ncsu.edu>.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Based on the following votes, the Apache VCL community has voted to release
Apache VCL 2.2:
+1 David Creech
+1 Andy Kurth
+1 Josh Thompson
+1 Alexander Patterson
+1 Gabriel Muñoz
+1 Henry Schaffer
+1 Mike Waldron
+1 Aaron Peeler
+1 Vinay Venkatesh
+1 Milen Paskov
+1 Xianqing Yu
+1 Gagan Aneja
+1 Tony Miller
+1 Kevan Miller
+1 Matt Hogstrom
+1 Alan Cabrera
That totals +16. The next step is for me to send an email to the general
incubator email list asking that the Incubator PMC vote on releasing Apache
VCL 2.2. I should have that email composed and sent this afternoon.
FYI - To pass, there must be at least three +1 votes cast by Incubator PMC
members with the majority of them being positive. If you want to follow the
vote process there, the archives for the general incubator list are here:
http://mail-archives.apache.org/mod_mbox/incubator-general/
Josh
On Wed September 22 2010 6:47:46 pm Josh Thompson wrote:
> I'm starting a different thread to vote again based on RC2 to make it
> easier to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
> and my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found
> on the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the
> INSTALLATION file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able
> to successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is
> "apache-VCL-2.2-RC2- incubating". Licensing information about perl and
> its required modules, php and its required modules, and mysql are stated
> as "system requirements" according to the information under "System
> Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone
> in the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
>
- --
- -------------------------------
Josh Thompson
Systems Programmer
Virtual Computing Lab (VCL)
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at www.keyserver.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iD8DBQFMojDaV/LQcNdtPQMRAp1VAJ9fm7h8aUh5LdtjIvubRZY6sv0gqACfVO3g
IuFm1G+tsjIM+dDMDLxZdWY=
=fCtD
-----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Aaron Peeler <aa...@ncsu.edu>.
+1
Aaron Peeler
On 9/22/10 6:47 PM, Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules, php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
--
Aaron Peeler
Program Manager
Virtual Computing Lab
NC State University
aaron_peeler@ncsu.edu
919-513-4571
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Matt Hogstrom <ma...@hogstrom.org>.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
+1
On Sep 24, 2010, at 11:44 AM, Kevan Miller wrote:
> Here's my +1.
>
> Signature/Checksums look good. Source and LICENSE looks good. One minor note: the NOTICE file contains:
>
> "Copyright 2009" It's not required, but in the future, we probably want that to be "Copyright 2009-2010"
>
> --kevan
>
> On Sep 22, 2010, at 6:47 PM, Josh Thompson wrote:
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> I'm starting a different thread to vote again based on RC2 to make it easier
>> to tally votes.
>>
>> This is basically the same email as before except with RC1 changed to RC2.
>> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
>> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
>> code modified related to them
>>
>> I created a release artifact based off of trunk. I copied trunk to a tag
>> under the tags area of the repo that is named release-2.2-RC2:
>>
>> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>>
>> The artifact is an export from that tag with the addition of Dojo Toolkit
>> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
>> my GPG signature of it are available from my space on people.a.o:
>>
>> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>>
>> The list of resolved JIRA issues associated with this release can be found on
>> the VCL 2.2 release page:
>>
>> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>>
>> Installation instructions are on the Confluence site and in the INSTALLATION
>> file included in the artifact.
>>
>> Aaron, Andy, and I have completed a test install of all parts and were able to
>> successfully create and capture a base image.
>>
>> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
>> incubating". Licensing information about perl and its required modules, php
>> and its required modules, and mysql are stated as "system requirements"
>> according to the information under "System Requirements" on
>> http://www.apache.org/legal/3party.html.
>>
>> Please vote by the end of the day on Monday, Sept. 27th to publish this
>> release (this allows for 3 business days to vote). Please note that anyone in
>> the VCL community is allowed to vote.
>>
>> [ ] +1 yes, release VCL 2.2
>> [ ] 0 dunno
>> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>>
>> Josh
>> - --
>> - -------------------------------
>> Josh Thompson
>> Systems Programmer
>> Virtual Computing Lab (VCL)
>> North Carolina State University
>>
>> Josh_Thompson@ncsu.edu
>> 919-515-5323
>>
>> my GPG/PGP key can be found at www.keyserver.net
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v2.0.14 (GNU/Linux)
>>
>> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
>> CU/ElAKOl8VlBzChNdDlTOw=
>> =kXRB
>> -----END PGP SIGNATURE-----
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.14 (Darwin)
iEYEARECAAYFAkyc/k8ACgkQy66+OaRsTKEn/ACaAyRvmSmbiXF2km5h+tOcsTDJ
4+sAoMiiRHTT0l/QkE2UXo1NH7mcVZyW
=TyPC
-----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Kevan Miller <ke...@gmail.com>.
Here's my +1.
Signature/Checksums look good. Source and LICENSE looks good. One minor note: the NOTICE file contains:
"Copyright 2009" It's not required, but in the future, we probably want that to be "Copyright 2009-2010"
--kevan
On Sep 22, 2010, at 6:47 PM, Josh Thompson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums, and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/
>
> The list of resolved JIRA issues associated with this release can be found on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules, php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
Re: [VOTE] release VCL 2.2 - voting based on RC2
Posted by Vinay Venkatesh <vi...@gmail.com>.
+1
On Wed, Sep 22, 2010 at 6:47 PM, Josh Thompson <jo...@ncsu.edu>wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it
> easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There were a few JIRA issues touched for RC2. VCL-386 was a completely new
> one. VCL-145, VCL-196, VCL-298, and VCL-303 were already resolved but had
> code modified related to them
>
> I created a release artifact based off of trunk. I copied trunk to a tag
> under the tags area of the repo that is named release-2.2-RC2:
>
> http://svn.apache.org/repos/asf/incubator/vcl/tags/release-2.2-RC2/
>
> The artifact is an export from that tag with the addition of Dojo Toolkit
> version 1.5.0 bundled in the web code. The artifact, MD5 and SHA1 sums,
> and
> my GPG signature of it are available from my space on people.a.o:
>
> http://people.apache.org/~jfthomps/apache-VCL-2.2-RC2-incubating/<http://people.apache.org/%7Ejfthomps/apache-VCL-2.2-RC2-incubating/>
>
> The list of resolved JIRA issues associated with this release can be found
> on
> the VCL 2.2 release page:
>
> http://cwiki.apache.org/VCL/vcl-22-unreleased.html
>
> Installation instructions are on the Confluence site and in the
> INSTALLATION
> file included in the artifact.
>
> Aaron, Andy, and I have completed a test install of all parts and were able
> to
> successfully create and capture a base image.
>
> The directory created by extracting the RC1 artifact is
> "apache-VCL-2.2-RC2-
> incubating". Licensing information about perl and its required modules,
> php
> and its required modules, and mysql are stated as "system requirements"
> according to the information under "System Requirements" on
> http://www.apache.org/legal/3party.html.
>
> Please vote by the end of the day on Monday, Sept. 27th to publish this
> release (this allows for 3 business days to vote). Please note that anyone
> in
> the VCL community is allowed to vote.
>
> [ ] +1 yes, release VCL 2.2
> [ ] 0 dunno
> [ ] -1 no, don't release VCL 2.2 (provide reasons if this is your vote)
>
> Josh
> - --
> - -------------------------------
> Josh Thompson
> Systems Programmer
> Virtual Computing Lab (VCL)
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at www.keyserver.net
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.14 (GNU/Linux)
>
> iD8DBQFMmoeWV/LQcNdtPQMRAhNtAJ47EYt4ufvLr7n2DTt/M6GWLA7oUACeLmoS
> CU/ElAKOl8VlBzChNdDlTOw=
> =kXRB
> -----END PGP SIGNATURE-----
>