You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Chunzi Oks <ti...@gmail.com> on 2012/08/13 12:20:44 UTC
Re: change / replace public ip range
For this error msg :
"Can't delete the network, not all user vms are expunged. Vm
VM[User|i-2-7-VM] is in Stopped state"
I am not sure this take effects against systemVM , but you can try by
changing VM expunge interval seconds in global config :
expunge.delay =1 (sec)
expunge.interval=1(sec)
After change the interval value , such as 1 secs , the destroyed VM will
immediately go into expunge status .
Regards,
Tian ChunFeng
On Mon, Aug 13, 2012 at 4:16 PM, Mice Xia <mi...@tcloudcomputing.com>wrote:
> In database there is a table 'user_ip_address' for public IP address
> allocation, maybe you can try changing its address and restart network on
> UI.
> There is also a table 'vlan', and you may want to change its description
> to reflect your new IP range in UI.
>
> It seems to work for trunk, not sure if it's applicable for 3.0.2.
>
> Caution:
> Don’t forget to backup your database (or everything) before you try this
> workaround.
>
> Regards
> Mice
>
> -----Original Message-----
> From: heince kurniawan [mailto:heince@gmail.com]
> Sent: Monday, August 13, 2012 12:28 PM
> To: cloudstack-users@incubator.apache.org
> Subject: change / replace public ip range
>
> Hi,
>
> I'm using CS 3.0.2 advanced networking , just changed our ISP with new IP
> ranges, and I'm trying to change the previous ip assignment.
>
> This is what i've done:
> - stop all vms
> - maintenance all hosts
> - destroy router and system vms
> - disable zone
>
> but i still can't delete the public ip, status : "The IP range can't be
> deleted because it has allocated public IP addresses."
>
> Even though i have destroyed router, the guest network mapping to public
> ip is still on state 'allocated', i can't delete the guest network :
> "Can't delete the network, not all user vms are expunged. Vm
> VM[User|i-2-7-VM] is in Stopped state"
>
> And i don't want to destroy all the vms, any workaround ?
>
> Bottom line: i just need to change the public ip range without destroying
> any user's vm.
>
> Regards,
> Heince
>
RE: change / replace public ip range
Posted by Matthew Patton <mp...@inforelay.com>.
Background thread, seriously? Use a database trigger or always run the query to get the correct number every time.
Re: change / replace public ip range
Posted by heince kurniawan <he...@gmail.com>.
Hi Mice,
The usage is correct but the total is wrong, FYI, my previous total ip is 10 now i got 20 ip, but it report only 10 .
is it save to modify 'total_capacity' on 'op_host_capacity' table ?
Regards,
Heince
On 13-Aug-2012, at 10:04 PM, Mice Xia wrote:
> Heince，
>
> Total public IP number should be equal to total count of rows in user_ip_address; while a background thread sums it up and update to op_host_capacity periodically (interval ' capacity.check.period')
> You can check these two tables and see if their values are correct.
>
> Regards
> Mice
>
> -----Original Message-----
> From: heince kurniawan [mailto:heince@gmail.com]
> Sent: Monday, August 13, 2012 8:43 PM
> To: cloudstack-users@incubator.apache.org
> Subject: Re: change / replace public ip range
>
> @ChunFeng,
>
> I didn't have vms in 'expunge' state and system vms are destroyed immediately.
>
> @Mice
> I did the DB change and system vms can apply new ip, thanks for the tips, but public ip capacity still showing previous value thus produce wrong total ip,
> do you know how to trigger / run the updates ?
>
> Regards,
> Heince
>
>
> On 13-Aug-2012, at 6:20 PM, Chunzi Oks wrote:
>
>> For this error msg :
>>
>> "Can't delete the network, not all user vms are expunged. Vm
>> VM[User|i-2-7-VM] is in Stopped state"
>>
>> I am not sure this take effects against systemVM , but you can try by
>> changing VM expunge interval seconds in global config :
>> expunge.delay =1 (sec)
>> expunge.interval=1(sec)
>>
>> After change the interval value , such as 1 secs , the destroyed VM will
>> immediately go into expunge status .
>>
>>
>> Regards,
>>
>> Tian ChunFeng
>>
>>
>>
>> On Mon, Aug 13, 2012 at 4:16 PM, Mice Xia <mi...@tcloudcomputing.com>wrote:
>>
>>> In database there is a table 'user_ip_address' for public IP address
>>> allocation, maybe you can try changing its address and restart network on
>>> UI.
>>> There is also a table 'vlan', and you may want to change its description
>>> to reflect your new IP range in UI.
>>>
>>> It seems to work for trunk, not sure if it's applicable for 3.0.2.
>>>
>>> Caution:
>>> Don’t forget to backup your database (or everything) before you try this
>>> workaround.
>>>
>>> Regards
>>> Mice
>>>
>>> -----Original Message-----
>>> From: heince kurniawan [mailto:heince@gmail.com]
>>> Sent: Monday, August 13, 2012 12:28 PM
>>> To: cloudstack-users@incubator.apache.org
>>> Subject: change / replace public ip range
>>>
>>> Hi,
>>>
>>> I'm using CS 3.0.2 advanced networking , just changed our ISP with new IP
>>> ranges, and I'm trying to change the previous ip assignment.
>>>
>>> This is what i've done:
>>> - stop all vms
>>> - maintenance all hosts
>>> - destroy router and system vms
>>> - disable zone
>>>
>>> but i still can't delete the public ip, status : "The IP range can't be
>>> deleted because it has allocated public IP addresses."
>>>
>>> Even though i have destroyed router, the guest network mapping to public
>>> ip is still on state 'allocated', i can't delete the guest network :
>>> "Can't delete the network, not all user vms are expunged. Vm
>>> VM[User|i-2-7-VM] is in Stopped state"
>>>
>>> And i don't want to destroy all the vms, any workaround ?
>>>
>>> Bottom line: i just need to change the public ip range without destroying
>>> any user's vm.
>>>
>>> Regards,
>>> Heince
>>>
>
RE: change / replace public ip range
Posted by Mice Xia <mi...@tcloudcomputing.com>.
Heince，
Total public IP number should be equal to total count of rows in user_ip_address; while a background thread sums it up and update to op_host_capacity periodically (interval ' capacity.check.period')
You can check these two tables and see if their values are correct.
Regards
Mice
-----Original Message-----
From: heince kurniawan [mailto:heince@gmail.com]
Sent: Monday, August 13, 2012 8:43 PM
To: cloudstack-users@incubator.apache.org
Subject: Re: change / replace public ip range
@ChunFeng,
I didn't have vms in 'expunge' state and system vms are destroyed immediately.
@Mice
I did the DB change and system vms can apply new ip, thanks for the tips, but public ip capacity still showing previous value thus produce wrong total ip,
do you know how to trigger / run the updates ?
Regards,
Heince
On 13-Aug-2012, at 6:20 PM, Chunzi Oks wrote:
> For this error msg :
>
> "Can't delete the network, not all user vms are expunged. Vm
> VM[User|i-2-7-VM] is in Stopped state"
>
> I am not sure this take effects against systemVM , but you can try by
> changing VM expunge interval seconds in global config :
> expunge.delay =1 (sec)
> expunge.interval=1(sec)
>
> After change the interval value , such as 1 secs , the destroyed VM will
> immediately go into expunge status .
>
>
> Regards,
>
> Tian ChunFeng
>
>
>
> On Mon, Aug 13, 2012 at 4:16 PM, Mice Xia <mi...@tcloudcomputing.com>wrote:
>
>> In database there is a table 'user_ip_address' for public IP address
>> allocation, maybe you can try changing its address and restart network on
>> UI.
>> There is also a table 'vlan', and you may want to change its description
>> to reflect your new IP range in UI.
>>
>> It seems to work for trunk, not sure if it's applicable for 3.0.2.
>>
>> Caution:
>> Don’t forget to backup your database (or everything) before you try this
>> workaround.
>>
>> Regards
>> Mice
>>
>> -----Original Message-----
>> From: heince kurniawan [mailto:heince@gmail.com]
>> Sent: Monday, August 13, 2012 12:28 PM
>> To: cloudstack-users@incubator.apache.org
>> Subject: change / replace public ip range
>>
>> Hi,
>>
>> I'm using CS 3.0.2 advanced networking , just changed our ISP with new IP
>> ranges, and I'm trying to change the previous ip assignment.
>>
>> This is what i've done:
>> - stop all vms
>> - maintenance all hosts
>> - destroy router and system vms
>> - disable zone
>>
>> but i still can't delete the public ip, status : "The IP range can't be
>> deleted because it has allocated public IP addresses."
>>
>> Even though i have destroyed router, the guest network mapping to public
>> ip is still on state 'allocated', i can't delete the guest network :
>> "Can't delete the network, not all user vms are expunged. Vm
>> VM[User|i-2-7-VM] is in Stopped state"
>>
>> And i don't want to destroy all the vms, any workaround ?
>>
>> Bottom line: i just need to change the public ip range without destroying
>> any user's vm.
>>
>> Regards,
>> Heince
>>
Re: change / replace public ip range
Posted by heince kurniawan <he...@gmail.com>.
@ChunFeng,
I didn't have vms in 'expunge' state and system vms are destroyed immediately.
@Mice
I did the DB change and system vms can apply new ip, thanks for the tips, but public ip capacity still showing previous value thus produce wrong total ip,
do you know how to trigger / run the updates ?
Regards,
Heince
On 13-Aug-2012, at 6:20 PM, Chunzi Oks wrote:
> For this error msg :
>
> "Can't delete the network, not all user vms are expunged. Vm
> VM[User|i-2-7-VM] is in Stopped state"
>
> I am not sure this take effects against systemVM , but you can try by
> changing VM expunge interval seconds in global config :
> expunge.delay =1 (sec)
> expunge.interval=1(sec)
>
> After change the interval value , such as 1 secs , the destroyed VM will
> immediately go into expunge status .
>
>
> Regards,
>
> Tian ChunFeng
>
>
>
> On Mon, Aug 13, 2012 at 4:16 PM, Mice Xia <mi...@tcloudcomputing.com>wrote:
>
>> In database there is a table 'user_ip_address' for public IP address
>> allocation, maybe you can try changing its address and restart network on
>> UI.
>> There is also a table 'vlan', and you may want to change its description
>> to reflect your new IP range in UI.
>>
>> It seems to work for trunk, not sure if it's applicable for 3.0.2.
>>
>> Caution:
>> Don’t forget to backup your database (or everything) before you try this
>> workaround.
>>
>> Regards
>> Mice
>>
>> -----Original Message-----
>> From: heince kurniawan [mailto:heince@gmail.com]
>> Sent: Monday, August 13, 2012 12:28 PM
>> To: cloudstack-users@incubator.apache.org
>> Subject: change / replace public ip range
>>
>> Hi,
>>
>> I'm using CS 3.0.2 advanced networking , just changed our ISP with new IP
>> ranges, and I'm trying to change the previous ip assignment.
>>
>> This is what i've done:
>> - stop all vms
>> - maintenance all hosts
>> - destroy router and system vms
>> - disable zone
>>
>> but i still can't delete the public ip, status : "The IP range can't be
>> deleted because it has allocated public IP addresses."
>>
>> Even though i have destroyed router, the guest network mapping to public
>> ip is still on state 'allocated', i can't delete the guest network :
>> "Can't delete the network, not all user vms are expunged. Vm
>> VM[User|i-2-7-VM] is in Stopped state"
>>
>> And i don't want to destroy all the vms, any workaround ?
>>
>> Bottom line: i just need to change the public ip range without destroying
>> any user's vm.
>>
>> Regards,
>> Heince
>>