You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@flink.apache.org by Gwenhael Pasquiers <gw...@ericsson.com> on 2017/03/02 11:12:54 UTC
RE: Cross operation on two huge datasets
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org
Cc: Fabian Hueske <fh...@gmail.com>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
RE: Cross operation on two huge datasets
Posted by Gwenhael Pasquiers <gw...@ericsson.com>.
Maybe I won’t try to broadcast my dataset after all : I finally found again what made me implement it with my own cloning flatmap + partitioning :
Quoted from https://ci.apache.org/projects/flink/flink-docs-release-1.2/dev/batch/index.html#broadcast-variables
Note: As the content of broadcast variables is kept in-memory on each node, it should not become too large. For simpler things like scalar values you can simply make parameters part of the closure of a function, or use the withParameters(...) method to pass in a configuration.
From: Gwenhael Pasquiers [mailto:gwenhael.pasquiers@ericsson.com]
Sent: vendredi 3 mars 2017 18:10
To: user@flink.apache.org
Subject: RE: Cross operation on two huge datasets
To answer Ankit,
It is a batch application.
Yes, I admit I did broadcasting by hand. I did it that way because the only other way I found to “broadcast” a DataSet was to use “withBroadcast”, and I was afraid that “withBroadcast” would make flink load the whole dataset in memory before broadcasting it rather than sending its elements 1 by 1.
I’ll try to use it, I’ll take anything that will make my code cleaner !
From: Gwenhael Pasquiers [mailto:gwenhael.pasquiers@ericsson.com]
Sent: vendredi 3 mars 2017 17:55
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: RE: Cross operation on two huge datasets
I tried putting my structure in a dataset but when serializing kryo went in an infinite recursive loop (crashed in StackOverflowException). So I’m staying with the static reference.
As for the partitioning, there is always the case of shapes overlapping on both right and left sections, I think it would take quite a bit of effort to implement. And it’s always better if I don’t have to manually set a frontier between the two (n) zones
From: Xingcan Cui [mailto:xingcanc@gmail.com]
Sent: vendredi 3 mars 2017 02:40
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
in my view, indexing and searching are two isolated processes and they should be separated. Maybe you should take the RTree structure as a new dataset (fortunately it's static, right?) and store it to a distributed cache or DFS that can be accessed by operators from any nodes. That will make the mapping from index partition to operator consistent (regardless of the locality problem).
Besides, you can make a "weak" index first, e.g., partitioning the points and shapes to "left" and "right", and in that way you do not need to broadcast the points to all index nodes (only left to left and right to right).
Best,
Xingcan
On Fri, Mar 3, 2017 at 1:49 AM, Jain, Ankit <an...@here.com>> wrote:
If I understood correctly, you have just implemented flink broadcasting by hand ☺.
You are still sending out the whole points dataset to each shape partition – right?
I think this could be optimized by using a keyBy or custom partition which is common across shapes & points – that should make sure a given point always go to same shape node.
I didn’t understand why Till Rohrmann said “you don’t know where Flink will schedule the new operator instance” – new operators are created when flink job is started – right? So, there should be no more new operators once the job is running and if you use consistent hash partitioning, same input should always end at same task manager node.
You could store the output as Flink State – that would be more fault tolerant but storing it as cache in JVM should work too.
Is this a batch job or streaming?
Between I am a newbee to Flink, still only learning – so take my suggestions with caution ☺
Thanks
Ankit
From: Gwenhael Pasquiers <gw...@ericsson.com>>
Date: Thursday, March 2, 2017 at 7:28 AM
To: "user@flink.apache.org<ma...@flink.apache.org>" <us...@flink.apache.org>>
Subject: RE: Cross operation on two huge datasets
I made it so that I don’t care where the next operator will be scheduled.
I configured taskslots = 1 and parallelism = yarnnodes so that :
• Each node contains 1/N th of the shapes (simple repartition() of the shapes dataset).
• The points will be cloned so that each partition of the points dataset will contain the whole original dataset
o Flatmap creates “#parallelism” clones of each entry
o Custom partitioning so that each clone of each entry is sent to a different partition
That way, whatever flink choses to do, each point will be compared to each shape. That’s why I think that in my case I can keep it in the JVM without issues. I’d prefer to avoid ser/deser-ing that structure.
I tried to use join (all items have same key) but it looks like flink tried to serialize the RTree anyway and it went in StackOverflowError (locally with only 1 parititon, not even on yarn).
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 15:40
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Yes you’re right about the “split” and broadcasting.
Storing it in the JVM is not a good approach, since you don’t know where Flink will schedule the new operator instance. It might be the case that an operator responsible for another partition gets scheduled to this JVM and then it has the wrong RTree information. Maybe you can model the set of RTrees as a DataSet[(PartitionKey, RTree)] and then join with the partitioned point data set.
Cheers,
Till
On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers [gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)<http://mailto:%5Bgwenhael.pasquiers@ericsson.com%5D(mailto:gwenhael.pasquiers@ericsson.com)> wrote:
The best for me would be to make it “persist” inside of the JVM heap in some map since I don’t even know if the structure is Serializable (I could try). But I understand.
As for broadcasting, wouldn’t broadcasting the variable cancel the efforts I did to “split” the dataset parsing over the nodes ?
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 14:42
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it (e.g. writing to a shared directory or emitting the model and using one of Flink’s sinks) and when creating the new operators you have to reread it from there (usually in the open method or from a Flink source as part of a broadcasted data set).
If you want to give a data set to all instances of an operator, then you should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <gw...@ericsson.com>> wrote:
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com<ma...@here.com>]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org<ma...@flink.apache.org>
Cc: Fabian Hueske <fh...@gmail.com>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
RE: Cross operation on two huge datasets
Posted by Gwenhael Pasquiers <gw...@ericsson.com>.
To answer Ankit,
It is a batch application.
Yes, I admit I did broadcasting by hand. I did it that way because the only other way I found to “broadcast” a DataSet was to use “withBroadcast”, and I was afraid that “withBroadcast” would make flink load the whole dataset in memory before broadcasting it rather than sending its elements 1 by 1.
I’ll try to use it, I’ll take anything that will make my code cleaner !
From: Gwenhael Pasquiers [mailto:gwenhael.pasquiers@ericsson.com]
Sent: vendredi 3 mars 2017 17:55
To: user@flink.apache.org
Subject: RE: Cross operation on two huge datasets
I tried putting my structure in a dataset but when serializing kryo went in an infinite recursive loop (crashed in StackOverflowException). So I’m staying with the static reference.
As for the partitioning, there is always the case of shapes overlapping on both right and left sections, I think it would take quite a bit of effort to implement. And it’s always better if I don’t have to manually set a frontier between the two (n) zones
From: Xingcan Cui [mailto:xingcanc@gmail.com]
Sent: vendredi 3 mars 2017 02:40
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
in my view, indexing and searching are two isolated processes and they should be separated. Maybe you should take the RTree structure as a new dataset (fortunately it's static, right?) and store it to a distributed cache or DFS that can be accessed by operators from any nodes. That will make the mapping from index partition to operator consistent (regardless of the locality problem).
Besides, you can make a "weak" index first, e.g., partitioning the points and shapes to "left" and "right", and in that way you do not need to broadcast the points to all index nodes (only left to left and right to right).
Best,
Xingcan
On Fri, Mar 3, 2017 at 1:49 AM, Jain, Ankit <an...@here.com>> wrote:
If I understood correctly, you have just implemented flink broadcasting by hand ☺.
You are still sending out the whole points dataset to each shape partition – right?
I think this could be optimized by using a keyBy or custom partition which is common across shapes & points – that should make sure a given point always go to same shape node.
I didn’t understand why Till Rohrmann said “you don’t know where Flink will schedule the new operator instance” – new operators are created when flink job is started – right? So, there should be no more new operators once the job is running and if you use consistent hash partitioning, same input should always end at same task manager node.
You could store the output as Flink State – that would be more fault tolerant but storing it as cache in JVM should work too.
Is this a batch job or streaming?
Between I am a newbee to Flink, still only learning – so take my suggestions with caution ☺
Thanks
Ankit
From: Gwenhael Pasquiers <gw...@ericsson.com>>
Date: Thursday, March 2, 2017 at 7:28 AM
To: "user@flink.apache.org<ma...@flink.apache.org>" <us...@flink.apache.org>>
Subject: RE: Cross operation on two huge datasets
I made it so that I don’t care where the next operator will be scheduled.
I configured taskslots = 1 and parallelism = yarnnodes so that :
• Each node contains 1/N th of the shapes (simple repartition() of the shapes dataset).
• The points will be cloned so that each partition of the points dataset will contain the whole original dataset
o Flatmap creates “#parallelism” clones of each entry
o Custom partitioning so that each clone of each entry is sent to a different partition
That way, whatever flink choses to do, each point will be compared to each shape. That’s why I think that in my case I can keep it in the JVM without issues. I’d prefer to avoid ser/deser-ing that structure.
I tried to use join (all items have same key) but it looks like flink tried to serialize the RTree anyway and it went in StackOverflowError (locally with only 1 parititon, not even on yarn).
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 15:40
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Yes you’re right about the “split” and broadcasting.
Storing it in the JVM is not a good approach, since you don’t know where Flink will schedule the new operator instance. It might be the case that an operator responsible for another partition gets scheduled to this JVM and then it has the wrong RTree information. Maybe you can model the set of RTrees as a DataSet[(PartitionKey, RTree)] and then join with the partitioned point data set.
Cheers,
Till
On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers [gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)<http://mailto:%5Bgwenhael.pasquiers@ericsson.com%5D(mailto:gwenhael.pasquiers@ericsson.com)> wrote:
The best for me would be to make it “persist” inside of the JVM heap in some map since I don’t even know if the structure is Serializable (I could try). But I understand.
As for broadcasting, wouldn’t broadcasting the variable cancel the efforts I did to “split” the dataset parsing over the nodes ?
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 14:42
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it (e.g. writing to a shared directory or emitting the model and using one of Flink’s sinks) and when creating the new operators you have to reread it from there (usually in the open method or from a Flink source as part of a broadcasted data set).
If you want to give a data set to all instances of an operator, then you should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <gw...@ericsson.com>> wrote:
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com<ma...@here.com>]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org<ma...@flink.apache.org>
Cc: Fabian Hueske <fh...@gmail.com>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
RE: Cross operation on two huge datasets
Posted by Gwenhael Pasquiers <gw...@ericsson.com>.
I tried putting my structure in a dataset but when serializing kryo went in an infinite recursive loop (crashed in StackOverflowException). So I’m staying with the static reference.
As for the partitioning, there is always the case of shapes overlapping on both right and left sections, I think it would take quite a bit of effort to implement. And it’s always better if I don’t have to manually set a frontier between the two (n) zones
From: Xingcan Cui [mailto:xingcanc@gmail.com]
Sent: vendredi 3 mars 2017 02:40
To: user@flink.apache.org
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
in my view, indexing and searching are two isolated processes and they should be separated. Maybe you should take the RTree structure as a new dataset (fortunately it's static, right?) and store it to a distributed cache or DFS that can be accessed by operators from any nodes. That will make the mapping from index partition to operator consistent (regardless of the locality problem).
Besides, you can make a "weak" index first, e.g., partitioning the points and shapes to "left" and "right", and in that way you do not need to broadcast the points to all index nodes (only left to left and right to right).
Best,
Xingcan
On Fri, Mar 3, 2017 at 1:49 AM, Jain, Ankit <an...@here.com>> wrote:
If I understood correctly, you have just implemented flink broadcasting by hand ☺.
You are still sending out the whole points dataset to each shape partition – right?
I think this could be optimized by using a keyBy or custom partition which is common across shapes & points – that should make sure a given point always go to same shape node.
I didn’t understand why Till Rohrmann said “you don’t know where Flink will schedule the new operator instance” – new operators are created when flink job is started – right? So, there should be no more new operators once the job is running and if you use consistent hash partitioning, same input should always end at same task manager node.
You could store the output as Flink State – that would be more fault tolerant but storing it as cache in JVM should work too.
Is this a batch job or streaming?
Between I am a newbee to Flink, still only learning – so take my suggestions with caution ☺
Thanks
Ankit
From: Gwenhael Pasquiers <gw...@ericsson.com>>
Date: Thursday, March 2, 2017 at 7:28 AM
To: "user@flink.apache.org<ma...@flink.apache.org>" <us...@flink.apache.org>>
Subject: RE: Cross operation on two huge datasets
I made it so that I don’t care where the next operator will be scheduled.
I configured taskslots = 1 and parallelism = yarnnodes so that :
• Each node contains 1/N th of the shapes (simple repartition() of the shapes dataset).
• The points will be cloned so that each partition of the points dataset will contain the whole original dataset
o Flatmap creates “#parallelism” clones of each entry
o Custom partitioning so that each clone of each entry is sent to a different partition
That way, whatever flink choses to do, each point will be compared to each shape. That’s why I think that in my case I can keep it in the JVM without issues. I’d prefer to avoid ser/deser-ing that structure.
I tried to use join (all items have same key) but it looks like flink tried to serialize the RTree anyway and it went in StackOverflowError (locally with only 1 parititon, not even on yarn).
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 15:40
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Yes you’re right about the “split” and broadcasting.
Storing it in the JVM is not a good approach, since you don’t know where Flink will schedule the new operator instance. It might be the case that an operator responsible for another partition gets scheduled to this JVM and then it has the wrong RTree information. Maybe you can model the set of RTrees as a DataSet[(PartitionKey, RTree)] and then join with the partitioned point data set.
Cheers,
Till
On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers [gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)<http://mailto:%5Bgwenhael.pasquiers@ericsson.com%5D(mailto:gwenhael.pasquiers@ericsson.com)> wrote:
The best for me would be to make it “persist” inside of the JVM heap in some map since I don’t even know if the structure is Serializable (I could try). But I understand.
As for broadcasting, wouldn’t broadcasting the variable cancel the efforts I did to “split” the dataset parsing over the nodes ?
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 14:42
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it (e.g. writing to a shared directory or emitting the model and using one of Flink’s sinks) and when creating the new operators you have to reread it from there (usually in the open method or from a Flink source as part of a broadcasted data set).
If you want to give a data set to all instances of an operator, then you should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <gw...@ericsson.com>> wrote:
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com<ma...@here.com>]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org<ma...@flink.apache.org>
Cc: Fabian Hueske <fh...@gmail.com>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
Re: Cross operation on two huge datasets
Posted by Xingcan Cui <xi...@gmail.com>.
Hi Gwen,
in my view, indexing and searching are two isolated processes and they
should be separated. Maybe you should take the RTree structure as a new
dataset (fortunately it's static, right?) and store it to a distributed
cache or DFS that can be accessed by operators from any nodes. That will
make the mapping from index partition to operator consistent (regardless of
the locality problem).
Besides, you can make a "weak" index first, e.g., partitioning the points
and shapes to "left" and "right", and in that way you do not need to
broadcast the points to all index nodes (only left to left and right to
right).
Best,
Xingcan
On Fri, Mar 3, 2017 at 1:49 AM, Jain, Ankit <an...@here.com> wrote:
> If I understood correctly, you have just implemented flink broadcasting by
> hand J.
>
>
>
> You are still sending out the whole points dataset to each shape partition
> – right?
>
>
>
> I think this could be optimized by using a keyBy or custom partition which
> is common across shapes & points – that should make sure a given point
> always go to same shape node.
>
>
>
> I didn’t understand why Till Rohrmann said “you don’t know where Flink
> will schedule the new operator instance” – new operators are created when
> flink job is started – right? So, there should be no more new operators
> once the job is running and if you use consistent hash partitioning, same
> input should always end at same task manager node.
>
>
>
> You could store the output as Flink State – that would be more fault
> tolerant but storing it as cache in JVM should work too.
>
>
>
> Is this a batch job or streaming?
>
>
>
> Between I am a newbee to Flink, still only learning – so take my
> suggestions with caution J
>
>
>
> Thanks
>
> Ankit
>
>
>
> *From: *Gwenhael Pasquiers <gw...@ericsson.com>
> *Date: *Thursday, March 2, 2017 at 7:28 AM
> *To: *"user@flink.apache.org" <us...@flink.apache.org>
> *Subject: *RE: Cross operation on two huge datasets
>
>
>
> I made it so that I don’t care where the next operator will be scheduled.
>
>
>
> I configured taskslots = 1 and parallelism = yarnnodes so that :
>
> · Each node contains 1/N th of the shapes (simple repartition()
> of the shapes dataset).
>
> · The points will be cloned so that each partition of the points
> dataset will contain the whole original dataset
>
> o Flatmap creates “#parallelism” clones of each entry
>
> o Custom partitioning so that each clone of each entry is sent to a
> different partition
>
>
>
> That way, whatever flink choses to do, each point will be compared to each
> shape. That’s why I think that in my case I can keep it in the JVM without
> issues. I’d prefer to avoid ser/deser-ing that structure.
>
>
>
> I tried to use join (all items have same key) but it looks like flink
> tried to serialize the RTree anyway and it went in StackOverflowError
> (locally with only 1 parititon, not even on yarn).
>
>
>
>
>
> *From:* Till Rohrmann [mailto:trohrmann@apache.org]
> *Sent:* jeudi 2 mars 2017 15:40
> *To:* user@flink.apache.org
> *Subject:* Re: Cross operation on two huge datasets
>
>
>
> Yes you’re right about the “split” and broadcasting.
>
> Storing it in the JVM is not a good approach, since you don’t know where
> Flink will schedule the new operator instance. It might be the case that an
> operator responsible for another partition gets scheduled to this JVM and
> then it has the wrong RTree information. Maybe you can model the set of
> RTrees as a DataSet[(PartitionKey, RTree)] and then join with the
> partitioned point data set.
>
> Cheers,
> Till
>
> On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers
> [gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)
> <http://mailto:%5Bgwenhael.pasquiers@ericsson.com%5D(mailto:gwenhael.pasquiers@ericsson.com)>
> wrote:
>
> The best for me would be to make it “persist” inside of the JVM heap in
> some map since I don’t even know if the structure is Serializable (I could
> try). But I understand.
>
>
>
> As for broadcasting, wouldn’t broadcasting the variable cancel the efforts
> I did to “split” the dataset parsing over the nodes ?
>
>
>
>
>
> *From:* Till Rohrmann [mailto:trohrmann@apache.org]
> *Sent:* jeudi 2 mars 2017 14:42
>
>
> *To:* user@flink.apache.org
> *Subject:* Re: Cross operation on two huge datasets
>
>
>
> Hi Gwenhael,
>
> if you want to persist operator state, then you would have to persist it
> (e.g. writing to a shared directory or emitting the model and using one of
> Flink’s sinks) and when creating the new operators you have to reread it
> from there (usually in the open method or from a Flink source as part of a
> broadcasted data set).
>
> If you want to give a data set to all instances of an operator, then you
> should broadcast this data set. You can do something like
>
> DataSet<Integer> input = ...
>
> DataSet<Integer> broadcastSet = ...
>
>
>
> input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
>
> List<Integer> broadcastSet;
>
>
>
> @Override
>
> public void open(Configuration configuration) {
>
> broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
>
> }
>
>
>
> @Override
>
> public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
>
>
>
> }
>
> }).withBroadcastSet(broadcastSet, "broadcast");
>
> Cheers,
> Till
>
>
>
>
>
> On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <
> gwenhael.pasquiers@ericsson.com> wrote:
>
> I (almost) made it work the following way:
>
>
>
> 1rst job : Read all the shapes, repartition() them equally on my N nodes,
> then on each node fill a static RTree (thanks for the tip).
>
>
>
> 2nd job : Read all the points, use a flatmap + custom partitioner to
> “clone” the dataset to all nodes, then apply a simple flatmap that will use
> the previously initialized static RTree, adding the Shape information to
> the point. Then do a groupBy to merge the points that were inside of
> multiple shapes.
>
>
>
> This works very well in a local runtime but fails on yarn because it seems
> that the taskmanager reloads the jar file between two jobs, making me lose
> my static RTree (I guess that newly loaded class overwrites the older one).
>
>
>
> I have two questions :
>
> - Is there a way to avoid that jar reload // can I store my
> RTree somewhere in jdk or flink, locally to the taskmanager, in a way that
> it wouldn’t be affected by the jar reload (since it would not be stored in
> any class from MY jar)?
>
> o I could also try to do it in a single job, but I don’t know how to
> ensure that some operations are done (parsing of shape) BEFORE starting
> others handling the points.
>
> - Is there a way to do that in a clean way using flink operators
> ? I’d need to be able to use the result of the iteration of a dataset
> inside of my map.
>
>
>
> Something like :
>
>
>
> datasetA.flatmap(new MyMapOperator(datasetB))…
>
>
>
> And In my implementation I would be able to iterate the whole datasetB
> BEFORE doing any operation in datasetA. That way I could parse all my
> shapes in an RTree before handling my points, without relying on static
>
>
>
> Or any other way that would allow me to do something similar.
>
>
>
> Thanks in advance for your insight.
>
>
>
> Gwen’
>
>
>
> *From:* Jain, Ankit [mailto:ankit.jain@here.com]
> *Sent:* jeudi 23 février 2017 19:21
> *To:* user@flink.apache.org
> *Cc:* Fabian Hueske <fh...@gmail.com>
>
>
> *Subject:* Re: Cross operation on two huge datasets
>
>
>
> Hi Gwen,
>
> I would recommend looking into a data structure called RTree that is
> designed specifically for this use case, i.e matching point to a region.
>
>
>
> Thanks
>
> Ankit
>
>
>
> *From: *Fabian Hueske <fh...@gmail.com>
> *Date: *Wednesday, February 22, 2017 at 2:41 PM
> *To: *<us...@flink.apache.org>
> *Subject: *Re: Cross operation on two huge datasets
>
>
>
> Hi Gwen,
>
> Flink usually performs a block nested loop join to cross two data sets.
>
> This algorithm spills one input to disk and streams the other input. For
> each input it fills a memory buffer and to perform the cross. Then the
> buffer of the spilled input is refilled with spilled records and records
> are again crossed. This is done until one iteration over the spill records
> is done. Then the other buffer of the streamed input is filled with the
> next records.
>
> You should be aware that cross is a super expensive operation, especially
> if you evaluate a complex condition for each pair of records. So cross can
> be easily too expensive to compute.
>
> For such use cases it is usually better to apply a coarse-grained spatial
> partitioning and do a key-based join on the partitions. Within each
> partition you'd perform a cross.
>
> Best, Fabian
>
>
>
>
>
> 2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <
> gwenhael.pasquiers@ericsson.com>:
>
> Hi,
>
>
>
> I need (or at least I think I do) to do a cross operation between two huge
> datasets. One dataset is a list of points. The other one is a list of
> shapes (areas).
>
>
>
> I want to know, for each point, the areas (they might overlap so a point
> can be in multiple areas) it belongs to so I thought I’d “cross” my points
> and areas since I need to test each point against each area.
>
>
>
> I tried it and my job stucks seems to work for some seconds then, at some
> point, it stucks.
>
>
>
> I’m wondering if Flink, for cross operations, tries to load one of the two
> datasets into RAM or if it’s able to split the job in multiple iterations
> (even if it means reading one of the two datasets multiple times).
>
>
>
> Or maybe I’m going at it the wrong way, or missing some parameters, feel
> free to correct me J
>
>
>
> I’m using flink 1.0.1.
>
>
>
> Thanks in advance
>
>
>
> Gwen’
>
>
>
>
>
>
>
Re: Cross operation on two huge datasets
Posted by "Jain, Ankit" <an...@here.com>.
If I understood correctly, you have just implemented flink broadcasting by hand ☺.
You are still sending out the whole points dataset to each shape partition – right?
I think this could be optimized by using a keyBy or custom partition which is common across shapes & points – that should make sure a given point always go to same shape node.
I didn’t understand why Till Rohrmann said “you don’t know where Flink will schedule the new operator instance” – new operators are created when flink job is started – right? So, there should be no more new operators once the job is running and if you use consistent hash partitioning, same input should always end at same task manager node.
You could store the output as Flink State – that would be more fault tolerant but storing it as cache in JVM should work too.
Is this a batch job or streaming?
Between I am a newbee to Flink, still only learning – so take my suggestions with caution ☺
Thanks
Ankit
From: Gwenhael Pasquiers <gw...@ericsson.com>
Date: Thursday, March 2, 2017 at 7:28 AM
To: "user@flink.apache.org" <us...@flink.apache.org>
Subject: RE: Cross operation on two huge datasets
I made it so that I don’t care where the next operator will be scheduled.
I configured taskslots = 1 and parallelism = yarnnodes so that :
· Each node contains 1/N th of the shapes (simple repartition() of the shapes dataset).
· The points will be cloned so that each partition of the points dataset will contain the whole original dataset
o Flatmap creates “#parallelism” clones of each entry
o Custom partitioning so that each clone of each entry is sent to a different partition
That way, whatever flink choses to do, each point will be compared to each shape. That’s why I think that in my case I can keep it in the JVM without issues. I’d prefer to avoid ser/deser-ing that structure.
I tried to use join (all items have same key) but it looks like flink tried to serialize the RTree anyway and it went in StackOverflowError (locally with only 1 parititon, not even on yarn).
From: Till Rohrmann [mailto:trohrmann@apache.org]
Sent: jeudi 2 mars 2017 15:40
To: user@flink.apache.org
Subject: Re: Cross operation on two huge datasets
Yes you’re right about the “split” and broadcasting.
Storing it in the JVM is not a good approach, since you don’t know where Flink will schedule the new operator instance. It might be the case that an operator responsible for another partition gets scheduled to this JVM and then it has the wrong RTree information. Maybe you can model the set of RTrees as a DataSet[(PartitionKey, RTree)] and then join with the partitioned point data set.
Cheers,
Till
On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers [gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)<http://mailto:[gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)> wrote:
The best for me would be to make it “persist” inside of the JVM heap in some map since I don’t even know if the structure is Serializable (I could try). But I understand.
As for broadcasting, wouldn’t broadcasting the variable cancel the efforts I did to “split” the dataset parsing over the nodes ?
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 14:42
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it (e.g. writing to a shared directory or emitting the model and using one of Flink’s sinks) and when creating the new operators you have to reread it from there (usually in the open method or from a Flink source as part of a broadcasted data set).
If you want to give a data set to all instances of an operator, then you should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <gw...@ericsson.com>> wrote:
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com<ma...@here.com>]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org<ma...@flink.apache.org>
Cc: Fabian Hueske <fh...@gmail.com>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
RE: Cross operation on two huge datasets
Posted by Gwenhael Pasquiers <gw...@ericsson.com>.
I managed to avoid the classes reload by controlling the order of operations using “.withBroadcast”.
My first task (shapes parsing) now outputs an empty “DataSet<Void> synchro”
Then whenever I need to wait for that synchro dataset to be ready (and mainly the operations prior to that dataset to be done), I use “.withBroadcast(“synchro”, synchro)” and I do a get for that broadcast variable in my open method.
That way I’m sure that I won’t begin testing my points against an incomplete static RTree. And also, since it’s a single job again, my static RTree remains valid ☺
Seems to be good for now even if the static thingie is a bit dirty.
However I’m surprised that reading 20 MB of parquet become 21GB of “bytes sent” by the flink reader.
From: Gwenhael Pasquiers [mailto:gwenhael.pasquiers@ericsson.com]
Sent: jeudi 2 mars 2017 16:28
To: user@flink.apache.org
Subject: RE: Cross operation on two huge datasets
I made it so that I don’t care where the next operator will be scheduled.
I configured taskslots = 1 and parallelism = yarnnodes so that :
· Each node contains 1/N th of the shapes (simple repartition() of the shapes dataset).
· The points will be cloned so that each partition of the points dataset will contain the whole original dataset
o Flatmap creates “#parallelism” clones of each entry
o Custom partitioning so that each clone of each entry is sent to a different partition
That way, whatever flink choses to do, each point will be compared to each shape. That’s why I think that in my case I can keep it in the JVM without issues. I’d prefer to avoid ser/deser-ing that structure.
I tried to use join (all items have same key) but it looks like flink tried to serialize the RTree anyway and it went in StackOverflowError (locally with only 1 parititon, not even on yarn).
From: Till Rohrmann [mailto:trohrmann@apache.org]
Sent: jeudi 2 mars 2017 15:40
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Yes you’re right about the “split” and broadcasting.
Storing it in the JVM is not a good approach, since you don’t know where Flink will schedule the new operator instance. It might be the case that an operator responsible for another partition gets scheduled to this JVM and then it has the wrong RTree information. Maybe you can model the set of RTrees as a DataSet[(PartitionKey, RTree)] and then join with the partitioned point data set.
Cheers,
Till
On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers [gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)<http://mailto:[gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)> wrote:
The best for me would be to make it “persist” inside of the JVM heap in some map since I don’t even know if the structure is Serializable (I could try). But I understand.
As for broadcasting, wouldn’t broadcasting the variable cancel the efforts I did to “split” the dataset parsing over the nodes ?
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 14:42
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it (e.g. writing to a shared directory or emitting the model and using one of Flink’s sinks) and when creating the new operators you have to reread it from there (usually in the open method or from a Flink source as part of a broadcasted data set).
If you want to give a data set to all instances of an operator, then you should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <gw...@ericsson.com>> wrote:
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com<ma...@here.com>]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org<ma...@flink.apache.org>
Cc: Fabian Hueske <fh...@gmail.com>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
RE: Cross operation on two huge datasets
Posted by Gwenhael Pasquiers <gw...@ericsson.com>.
I made it so that I don’t care where the next operator will be scheduled.
I configured taskslots = 1 and parallelism = yarnnodes so that :
· Each node contains 1/N th of the shapes (simple repartition() of the shapes dataset).
· The points will be cloned so that each partition of the points dataset will contain the whole original dataset
o Flatmap creates “#parallelism” clones of each entry
o Custom partitioning so that each clone of each entry is sent to a different partition
That way, whatever flink choses to do, each point will be compared to each shape. That’s why I think that in my case I can keep it in the JVM without issues. I’d prefer to avoid ser/deser-ing that structure.
I tried to use join (all items have same key) but it looks like flink tried to serialize the RTree anyway and it went in StackOverflowError (locally with only 1 parititon, not even on yarn).
From: Till Rohrmann [mailto:trohrmann@apache.org]
Sent: jeudi 2 mars 2017 15:40
To: user@flink.apache.org
Subject: Re: Cross operation on two huge datasets
Yes you’re right about the “split” and broadcasting.
Storing it in the JVM is not a good approach, since you don’t know where Flink will schedule the new operator instance. It might be the case that an operator responsible for another partition gets scheduled to this JVM and then it has the wrong RTree information. Maybe you can model the set of RTrees as a DataSet[(PartitionKey, RTree)] and then join with the partitioned point data set.
Cheers,
Till
On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers [gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)<http://mailto:[gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)> wrote:
The best for me would be to make it “persist” inside of the JVM heap in some map since I don’t even know if the structure is Serializable (I could try). But I understand.
As for broadcasting, wouldn’t broadcasting the variable cancel the efforts I did to “split” the dataset parsing over the nodes ?
From: Till Rohrmann [mailto:trohrmann@apache.org<ma...@apache.org>]
Sent: jeudi 2 mars 2017 14:42
To: user@flink.apache.org<ma...@flink.apache.org>
Subject: Re: Cross operation on two huge datasets
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it (e.g. writing to a shared directory or emitting the model and using one of Flink’s sinks) and when creating the new operators you have to reread it from there (usually in the open method or from a Flink source as part of a broadcasted data set).
If you want to give a data set to all instances of an operator, then you should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <gw...@ericsson.com>> wrote:
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com<ma...@here.com>]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org<ma...@flink.apache.org>
Cc: Fabian Hueske <fh...@gmail.com>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
Re: Cross operation on two huge datasets
Posted by Till Rohrmann <tr...@apache.org>.
Yes you’re right about the “split” and broadcasting.
Storing it in the JVM is not a good approach, since you don’t know where
Flink will schedule the new operator instance. It might be the case that an
operator responsible for another partition gets scheduled to this JVM and
then it has the wrong RTree information. Maybe you can model the set of
RTrees as a DataSet[(PartitionKey, RTree)] and then join with the
partitioned point data set.
Cheers,
Till
On Thu, Mar 2, 2017 at 3:29 PM, Gwenhael Pasquiers
[gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)
<http://mailto:[gwenhael.pasquiers@ericsson.com](mailto:gwenhael.pasquiers@ericsson.com)>
wrote:
The best for me would be to make it “persist” inside of the JVM heap in
> some map since I don’t even know if the structure is Serializable (I could
> try). But I understand.
>
>
>
> As for broadcasting, wouldn’t broadcasting the variable cancel the efforts
> I did to “split” the dataset parsing over the nodes ?
>
>
>
>
>
> *From:* Till Rohrmann [mailto:trohrmann@apache.org]
> *Sent:* jeudi 2 mars 2017 14:42
>
> *To:* user@flink.apache.org
> *Subject:* Re: Cross operation on two huge datasets
>
>
>
> Hi Gwenhael,
>
> if you want to persist operator state, then you would have to persist it
> (e.g. writing to a shared directory or emitting the model and using one of
> Flink’s sinks) and when creating the new operators you have to reread it
> from there (usually in the open method or from a Flink source as part of a
> broadcasted data set).
>
> If you want to give a data set to all instances of an operator, then you
> should broadcast this data set. You can do something like
>
> DataSet<Integer> input = ...
>
> DataSet<Integer> broadcastSet = ...
>
>
>
> input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
>
> List<Integer> broadcastSet;
>
>
>
> @Override
>
> public void open(Configuration configuration) {
>
> broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
>
> }
>
>
>
> @Override
>
> public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
>
>
>
> }
>
> }).withBroadcastSet(broadcastSet, "broadcast");
>
> Cheers,
> Till
>
>
>
>
>
> On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <
> gwenhael.pasquiers@ericsson.com> wrote:
>
> I (almost) made it work the following way:
>
>
>
> 1rst job : Read all the shapes, repartition() them equally on my N nodes,
> then on each node fill a static RTree (thanks for the tip).
>
>
>
> 2nd job : Read all the points, use a flatmap + custom partitioner to
> “clone” the dataset to all nodes, then apply a simple flatmap that will use
> the previously initialized static RTree, adding the Shape information to
> the point. Then do a groupBy to merge the points that were inside of
> multiple shapes.
>
>
>
> This works very well in a local runtime but fails on yarn because it seems
> that the taskmanager reloads the jar file between two jobs, making me lose
> my static RTree (I guess that newly loaded class overwrites the older one).
>
>
>
> I have two questions :
>
> - Is there a way to avoid that jar reload // can I store my
> RTree somewhere in jdk or flink, locally to the taskmanager, in a way that
> it wouldn’t be affected by the jar reload (since it would not be stored in
> any class from MY jar)?
>
> o I could also try to do it in a single job, but I don’t know how to
> ensure that some operations are done (parsing of shape) BEFORE starting
> others handling the points.
>
> - Is there a way to do that in a clean way using flink operators
> ? I’d need to be able to use the result of the iteration of a dataset
> inside of my map.
>
>
>
> Something like :
>
>
>
> datasetA.flatmap(new MyMapOperator(datasetB))…
>
>
>
> And In my implementation I would be able to iterate the whole datasetB
> BEFORE doing any operation in datasetA. That way I could parse all my
> shapes in an RTree before handling my points, without relying on static
>
>
>
> Or any other way that would allow me to do something similar.
>
>
>
> Thanks in advance for your insight.
>
>
>
> Gwen’
>
>
>
> *From:* Jain, Ankit [mailto:ankit.jain@here.com]
> *Sent:* jeudi 23 février 2017 19:21
> *To:* user@flink.apache.org
> *Cc:* Fabian Hueske <fh...@gmail.com>
>
>
> *Subject:* Re: Cross operation on two huge datasets
>
>
>
> Hi Gwen,
>
> I would recommend looking into a data structure called RTree that is
> designed specifically for this use case, i.e matching point to a region.
>
>
>
> Thanks
>
> Ankit
>
>
>
> *From: *Fabian Hueske <fh...@gmail.com>
> *Date: *Wednesday, February 22, 2017 at 2:41 PM
> *To: *<us...@flink.apache.org>
> *Subject: *Re: Cross operation on two huge datasets
>
>
>
> Hi Gwen,
>
> Flink usually performs a block nested loop join to cross two data sets.
>
> This algorithm spills one input to disk and streams the other input. For
> each input it fills a memory buffer and to perform the cross. Then the
> buffer of the spilled input is refilled with spilled records and records
> are again crossed. This is done until one iteration over the spill records
> is done. Then the other buffer of the streamed input is filled with the
> next records.
>
> You should be aware that cross is a super expensive operation, especially
> if you evaluate a complex condition for each pair of records. So cross can
> be easily too expensive to compute.
>
> For such use cases it is usually better to apply a coarse-grained spatial
> partitioning and do a key-based join on the partitions. Within each
> partition you'd perform a cross.
>
> Best, Fabian
>
>
>
>
>
> 2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <
> gwenhael.pasquiers@ericsson.com>:
>
> Hi,
>
>
>
> I need (or at least I think I do) to do a cross operation between two huge
> datasets. One dataset is a list of points. The other one is a list of
> shapes (areas).
>
>
>
> I want to know, for each point, the areas (they might overlap so a point
> can be in multiple areas) it belongs to so I thought I’d “cross” my points
> and areas since I need to test each point against each area.
>
>
>
> I tried it and my job stucks seems to work for some seconds then, at some
> point, it stucks.
>
>
>
> I’m wondering if Flink, for cross operations, tries to load one of the two
> datasets into RAM or if it’s able to split the job in multiple iterations
> (even if it means reading one of the two datasets multiple times).
>
>
>
> Or maybe I’m going at it the wrong way, or missing some parameters, feel
> free to correct me J
>
>
>
> I’m using flink 1.0.1.
>
>
>
> Thanks in advance
>
>
>
> Gwen’
>
>
>
>
>
RE: Cross operation on two huge datasets
Posted by Gwenhael Pasquiers <gw...@ericsson.com>.
The best for me would be to make it “persist” inside of the JVM heap in some map since I don’t even know if the structure is Serializable (I could try). But I understand.
As for broadcasting, wouldn’t broadcasting the variable cancel the efforts I did to “split” the dataset parsing over the nodes ?
From: Till Rohrmann [mailto:trohrmann@apache.org]
Sent: jeudi 2 mars 2017 14:42
To: user@flink.apache.org
Subject: Re: Cross operation on two huge datasets
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it (e.g. writing to a shared directory or emitting the model and using one of Flink’s sinks) and when creating the new operators you have to reread it from there (usually in the open method or from a Flink source as part of a broadcasted data set).
If you want to give a data set to all instances of an operator, then you should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector) throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <gw...@ericsson.com>> wrote:
I (almost) made it work the following way:
1rst job : Read all the shapes, repartition() them equally on my N nodes, then on each node fill a static RTree (thanks for the tip).
2nd job : Read all the points, use a flatmap + custom partitioner to “clone” the dataset to all nodes, then apply a simple flatmap that will use the previously initialized static RTree, adding the Shape information to the point. Then do a groupBy to merge the points that were inside of multiple shapes.
This works very well in a local runtime but fails on yarn because it seems that the taskmanager reloads the jar file between two jobs, making me lose my static RTree (I guess that newly loaded class overwrites the older one).
I have two questions :
- Is there a way to avoid that jar reload // can I store my RTree somewhere in jdk or flink, locally to the taskmanager, in a way that it wouldn’t be affected by the jar reload (since it would not be stored in any class from MY jar)?
o I could also try to do it in a single job, but I don’t know how to ensure that some operations are done (parsing of shape) BEFORE starting others handling the points.
- Is there a way to do that in a clean way using flink operators ? I’d need to be able to use the result of the iteration of a dataset inside of my map.
Something like :
datasetA.flatmap(new MyMapOperator(datasetB))…
And In my implementation I would be able to iterate the whole datasetB BEFORE doing any operation in datasetA. That way I could parse all my shapes in an RTree before handling my points, without relying on static
Or any other way that would allow me to do something similar.
Thanks in advance for your insight.
Gwen’
From: Jain, Ankit [mailto:ankit.jain@here.com<ma...@here.com>]
Sent: jeudi 23 février 2017 19:21
To: user@flink.apache.org<ma...@flink.apache.org>
Cc: Fabian Hueske <fh...@gmail.com>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
I would recommend looking into a data structure called RTree that is designed specifically for this use case, i.e matching point to a region.
Thanks
Ankit
From: Fabian Hueske <fh...@gmail.com>>
Date: Wednesday, February 22, 2017 at 2:41 PM
To: <us...@flink.apache.org>>
Subject: Re: Cross operation on two huge datasets
Hi Gwen,
Flink usually performs a block nested loop join to cross two data sets.
This algorithm spills one input to disk and streams the other input. For each input it fills a memory buffer and to perform the cross. Then the buffer of the spilled input is refilled with spilled records and records are again crossed. This is done until one iteration over the spill records is done. Then the other buffer of the streamed input is filled with the next records.
You should be aware that cross is a super expensive operation, especially if you evaluate a complex condition for each pair of records. So cross can be easily too expensive to compute.
For such use cases it is usually better to apply a coarse-grained spatial partitioning and do a key-based join on the partitions. Within each partition you'd perform a cross.
Best, Fabian
2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <gw...@ericsson.com>>:
Hi,
I need (or at least I think I do) to do a cross operation between two huge datasets. One dataset is a list of points. The other one is a list of shapes (areas).
I want to know, for each point, the areas (they might overlap so a point can be in multiple areas) it belongs to so I thought I’d “cross” my points and areas since I need to test each point against each area.
I tried it and my job stucks seems to work for some seconds then, at some point, it stucks.
I’m wondering if Flink, for cross operations, tries to load one of the two datasets into RAM or if it’s able to split the job in multiple iterations (even if it means reading one of the two datasets multiple times).
Or maybe I’m going at it the wrong way, or missing some parameters, feel free to correct me ☺
I’m using flink 1.0.1.
Thanks in advance
Gwen’
Re: Cross operation on two huge datasets
Posted by Till Rohrmann <tr...@apache.org>.
Hi Gwenhael,
if you want to persist operator state, then you would have to persist it
(e.g. writing to a shared directory or emitting the model and using one of
Flink’s sinks) and when creating the new operators you have to reread it
from there (usually in the open method or from a Flink source as part of a
broadcasted data set).
If you want to give a data set to all instances of an operator, then you
should broadcast this data set. You can do something like
DataSet<Integer> input = ...
DataSet<Integer> broadcastSet = ...
input.flatMap(new RichFlatMapFunction<Integer, Integer>() {
List<Integer> broadcastSet;
@Override
public void open(Configuration configuration) {
broadcastSet = getRuntimeContext().getBroadcastVariable("broadcast");
}
@Override
public void flatMap(Integer integer, Collector<Integer> collector)
throws Exception {
}
}).withBroadcastSet(broadcastSet, "broadcast");
Cheers,
Till
On Thu, Mar 2, 2017 at 12:12 PM, Gwenhael Pasquiers <
gwenhael.pasquiers@ericsson.com> wrote:
> I (almost) made it work the following way:
>
>
>
> 1rst job : Read all the shapes, repartition() them equally on my N nodes,
> then on each node fill a static RTree (thanks for the tip).
>
>
>
> 2nd job : Read all the points, use a flatmap + custom partitioner to
> “clone” the dataset to all nodes, then apply a simple flatmap that will use
> the previously initialized static RTree, adding the Shape information to
> the point. Then do a groupBy to merge the points that were inside of
> multiple shapes.
>
>
>
> This works very well in a local runtime but fails on yarn because it seems
> that the taskmanager reloads the jar file between two jobs, making me lose
> my static RTree (I guess that newly loaded class overwrites the older one).
>
>
>
> I have two questions :
>
> - Is there a way to avoid that jar reload // can I store my
> RTree somewhere in jdk or flink, locally to the taskmanager, in a way that
> it wouldn’t be affected by the jar reload (since it would not be stored in
> any class from MY jar)?
>
> o I could also try to do it in a single job, but I don’t know how to
> ensure that some operations are done (parsing of shape) BEFORE starting
> others handling the points.
>
> - Is there a way to do that in a clean way using flink operators
> ? I’d need to be able to use the result of the iteration of a dataset
> inside of my map.
>
>
>
> Something like :
>
>
>
> datasetA.flatmap(new MyMapOperator(datasetB))…
>
>
>
> And In my implementation I would be able to iterate the whole datasetB
> BEFORE doing any operation in datasetA. That way I could parse all my
> shapes in an RTree before handling my points, without relying on static
>
>
>
> Or any other way that would allow me to do something similar.
>
>
>
> Thanks in advance for your insight.
>
>
>
> Gwen’
>
>
>
> *From:* Jain, Ankit [mailto:ankit.jain@here.com]
> *Sent:* jeudi 23 février 2017 19:21
> *To:* user@flink.apache.org
> *Cc:* Fabian Hueske <fh...@gmail.com>
>
> *Subject:* Re: Cross operation on two huge datasets
>
>
>
> Hi Gwen,
>
> I would recommend looking into a data structure called RTree that is
> designed specifically for this use case, i.e matching point to a region.
>
>
>
> Thanks
>
> Ankit
>
>
>
> *From: *Fabian Hueske <fh...@gmail.com>
> *Date: *Wednesday, February 22, 2017 at 2:41 PM
> *To: *<us...@flink.apache.org>
> *Subject: *Re: Cross operation on two huge datasets
>
>
>
> Hi Gwen,
>
> Flink usually performs a block nested loop join to cross two data sets.
>
> This algorithm spills one input to disk and streams the other input. For
> each input it fills a memory buffer and to perform the cross. Then the
> buffer of the spilled input is refilled with spilled records and records
> are again crossed. This is done until one iteration over the spill records
> is done. Then the other buffer of the streamed input is filled with the
> next records.
>
> You should be aware that cross is a super expensive operation, especially
> if you evaluate a complex condition for each pair of records. So cross can
> be easily too expensive to compute.
>
> For such use cases it is usually better to apply a coarse-grained spatial
> partitioning and do a key-based join on the partitions. Within each
> partition you'd perform a cross.
>
> Best, Fabian
>
>
>
>
>
> 2017-02-21 18:34 GMT+01:00 Gwenhael Pasquiers <
> gwenhael.pasquiers@ericsson.com>:
>
> Hi,
>
>
>
> I need (or at least I think I do) to do a cross operation between two huge
> datasets. One dataset is a list of points. The other one is a list of
> shapes (areas).
>
>
>
> I want to know, for each point, the areas (they might overlap so a point
> can be in multiple areas) it belongs to so I thought I’d “cross” my points
> and areas since I need to test each point against each area.
>
>
>
> I tried it and my job stucks seems to work for some seconds then, at some
> point, it stucks.
>
>
>
> I’m wondering if Flink, for cross operations, tries to load one of the two
> datasets into RAM or if it’s able to split the job in multiple iterations
> (even if it means reading one of the two datasets multiple times).
>
>
>
> Or maybe I’m going at it the wrong way, or missing some parameters, feel
> free to correct me J
>
>
>
> I’m using flink 1.0.1.
>
>
>
> Thanks in advance
>
>
>
> Gwen’
>
>
>