[GitHub] [incubator-nuttx] davids5 edited a comment on pull request #2943: stm32x7:lse ensure it is started

[GitBox <gi...@apache.org>]

davids5 edited a comment on pull request #2943:
URL: https://github.com/apache/incubator-nuttx/pull/2943#issuecomment-789734279


   @juniskane You can turn off the  auto if you want to. 
   
   If the index that documented do not match the CONFIG that part can be reverted. and you can use the CONFIG in the code.
   
   But on the ~~F7~~ H7 the second stanza (RUN value) does not work. The value can not be changed with the OCS running on the ~~F7~~ H7.
   
   Do you have any concern of over driving? 
   
   > HW guy tells you to, to your code. No need to add useless run-time loop
   
   Did you read the part where 15 out of 100 F7 boards failed all with the same components and varied on silicon version on the H7? 
   
   This loop only happens once per boot AFTER Vbat is removed. 
   
   At it was written the board are bricked in MFG, with good xatal and caps.
   
   Let me know if you want me to revert the static setting section to used the Kconfig directly and not as an index .  
   
   3/4/21 - Correction: I misspoke "The value can not be changed with the OCS running on the F7." It is the H7, that the update can not happen after running.


----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

For queries about this service, please contact Infrastructure at:
users@infra.apache.org