You are viewing a plain text version of this content. The canonical link for it is here.
Posted to jetspeed-user@portals.apache.org by Ron Wheeler <rw...@artifact-software.com> on 2007/04/25 19:06:36 UTC

Getting Started

Since none of the instructions on the Jetspeed site seem to work for 
installing Jetspeed, I would like to know how anyone gets a Jetspeed 
application started. The documentation is either wrong or files are not 
where they are supposed to be for every way that is written up.

What is the best way to start a Jetspeed-2 project?

We have Eclipse and that would be my preferred environment to work in.

I have Tomcat 6 and can fix any little Tomcat 5 to 6 errors. but we also 
can run on 5 if we can not get going on the current Tomcat.
We have downloaded Maven2 but could get 1 if that is all that works.

If I can strip out Maven and go with Ant, that would not be too bad but 
at the moment, I would accept a Maven solution if it will let us get 
started.


Ron




---------------------------------------------------------------------
To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
For additional commands, e-mail: jetspeed-user-help@portals.apache.org


Re: Getting Started

Posted by David Sean Taylor <da...@bluesunrise.com>.
On Apr 26, 2007, at 6:15 AM, Ron Wheeler wrote:

> Much better.
> I took all three files.
> Can I start with the 2.2 dev installer?
>

Yes, that installer is only a few weeks old and has some bug fixes in  
it.
The Ant goal "create.installer" will take the 2.2-dev installer and  
merge the tutorial's customizations  into it to make a custom installer
Please try following the instructions in the email, and send me  
feedback with any issues so I can update my xdocs here

Do you think its alright to require Eclipse WTP (Web Tools Platform)  
in the tutorial?
I prefer working with it for developing portlet applications.

> What is the best set of instructions available for this set of files?
>

The only instructions are in the email that I sent to David Dyer.

I am working on the xdocs (online Apache documentation) and hope to  
have it ready next week.
So your feedback is much appreciated


---------------------------------------------------------------------
To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
For additional commands, e-mail: jetspeed-user-help@portals.apache.org


Re: Getting Started

Posted by Ron Wheeler <rw...@artifact-software.com>.
Much better.
I took all three files.
Can I start with the 2.2 dev installer?

What is the best set of instructions available for this set of files?

Ron

Ron

David Sean Taylor wrote:
>
> On Apr 25, 2007, at 7:51 PM, Ron Wheeler wrote:
>
>> http://www.bluesunrise.com/tutorials/ant/jetexpress.zip gives
>>
> http://www.bluesunrise.com/training/ant/
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
> For additional commands, e-mail: jetspeed-user-help@portals.apache.org
>
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
For additional commands, e-mail: jetspeed-user-help@portals.apache.org


Re: Getting Started

Posted by David Sean Taylor <da...@bluesunrise.com>.
On Apr 25, 2007, at 7:51 PM, Ron Wheeler wrote:

> http://www.bluesunrise.com/tutorials/ant/jetexpress.zip gives
>
http://www.bluesunrise.com/training/ant/


---------------------------------------------------------------------
To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
For additional commands, e-mail: jetspeed-user-help@portals.apache.org


Re: Getting Started

Posted by Ron Wheeler <rw...@artifact-software.com>.
http://www.bluesunrise.com/tutorials/ant/jetexpress.zip gives


  404 Not Found

/tutorials/ant/jetexpress.zip was not found on this server.
------------------------------------------------------------------------
Resin-3.0.18 (built Fri, 24 Feb 2006 02:47:03 PST)


That kind of stopped David and I.

Ron

David Sean Taylor wrote:
> Ron,
>
>
> On Apr 25, 2007, at 10:06 AM, Ron Wheeler wrote:
>
>> Since none of the instructions on the Jetspeed site seem to work for 
>> installing Jetspeed, I would like to know how anyone gets a Jetspeed 
>> application started. The documentation is either wrong or files are 
>> not where they are supposed to be for every way that is written up.
>>
>
> Actually that processes documented on the website work fine for 
> building Jetspeed itself. Sometimes getting started with Maven is a 
> bit challenging (but worthwhile IMO)
> I would like to simplify the custom build process....
>
>> What is the best way to start a Jetspeed-2 project?
>>
>
> Could you help us test the new Ant Custom Installation
>
> If you could try the instructions I sent to David Dyer a few emails 
> back on this list and see how it works for you
> I used this approach in my last training course and everyone had it up 
> and running pretty quickly, much faster than with the Maven-2 approach
> If we can get this to work I will document the process in xdocs and 
> replace the current tutorial
>
>> We have Eclipse and that would be my preferred environment to work in.
>>
>
> Ant can easily plugin into Eclipse
> Additionally, the tutorial I am working on builds and deploys all PAs 
> with WTP
>
> Sorry about the delay in the new Ant tutorial and all the other issues 
> that I am working on currently that I've promised people but are still 
> incomplete
> I had to go out of town for 9 days on business and now I can't seem to 
> catch up!
>
>
>> I have Tomcat 6 and can fix any little Tomcat 5 to 6 errors. but we 
>> also can run on 5 if we can not get going on the current Tomcat.
>> We have downloaded Maven2 but could get 1 if that is all that works.
>>
>> If I can strip out Maven and go with Ant, that would not be too bad 
>> but at the moment, I would accept a Maven solution if it will let us 
>> get started.
>>
>>
>> Ron
>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
>> For additional commands, e-mail: jetspeed-user-help@portals.apache.org
>>
>>
>
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
For additional commands, e-mail: jetspeed-user-help@portals.apache.org


Re: Getting Started

Posted by Ron Wheeler <rw...@artifact-software.com>.
David and I need to find some place to start but there seems to lots of 
confusion between Maven 1 and 2 and all the paths through the install or 
tutorial run into a Maven problem somewhere along the line with some 
required file missing from the repositories.

Can I start with Maven 2 under Eclipse?
I am getting pretty reasonable with Hibernate and Spring under Eclipse 
even though the Hibernate plug-in is a bit flaky.

What Maven plug-in do you use with Eclipse?

If you can be sure that all the files are where they are supposed to be, 
David and I can work through the steps and document our path.
Just point us to a starting point that will get us a basic project 
development shell application that we can start to alter.

We need to build a student information system for a multicompany portal 
that tracks student information and interfaces to third party eLearning 
Content Providers.
I am writing the spec now but will soon need to know enough to cost it.

Ron


David Sean Taylor wrote:
> Ron,
>
>
> On Apr 25, 2007, at 10:06 AM, Ron Wheeler wrote:
>
>> Since none of the instructions on the Jetspeed site seem to work for 
>> installing Jetspeed, I would like to know how anyone gets a Jetspeed 
>> application started. The documentation is either wrong or files are 
>> not where they are supposed to be for every way that is written up.
>>
>
> Actually that processes documented on the website work fine for 
> building Jetspeed itself. Sometimes getting started with Maven is a 
> bit challenging (but worthwhile IMO)
> I would like to simplify the custom build process....
>
>> What is the best way to start a Jetspeed-2 project?
>>
>
> Could you help us test the new Ant Custom Installation
>
> If you could try the instructions I sent to David Dyer a few emails 
> back on this list and see how it works for you
> I used this approach in my last training course and everyone had it up 
> and running pretty quickly, much faster than with the Maven-2 approach
> If we can get this to work I will document the process in xdocs and 
> replace the current tutorial
>
>> We have Eclipse and that would be my preferred environment to work in.
>>
>
> Ant can easily plugin into Eclipse
> Additionally, the tutorial I am working on builds and deploys all PAs 
> with WTP
>
> Sorry about the delay in the new Ant tutorial and all the other issues 
> that I am working on currently that I've promised people but are still 
> incomplete
> I had to go out of town for 9 days on business and now I can't seem to 
> catch up!
>
>
>> I have Tomcat 6 and can fix any little Tomcat 5 to 6 errors. but we 
>> also can run on 5 if we can not get going on the current Tomcat.
>> We have downloaded Maven2 but could get 1 if that is all that works.
>>
>> If I can strip out Maven and go with Ant, that would not be too bad 
>> but at the moment, I would accept a Maven solution if it will let us 
>> get started.
>>
>>
>> Ron
>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
>> For additional commands, e-mail: jetspeed-user-help@portals.apache.org
>>
>>
>
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
For additional commands, e-mail: jetspeed-user-help@portals.apache.org


Re: Getting Started

Posted by David Sean Taylor <da...@bluesunrise.com>.
Ron,


On Apr 25, 2007, at 10:06 AM, Ron Wheeler wrote:

> Since none of the instructions on the Jetspeed site seem to work  
> for installing Jetspeed, I would like to know how anyone gets a  
> Jetspeed application started. The documentation is either wrong or  
> files are not where they are supposed to be for every way that is  
> written up.
>

Actually that processes documented on the website work fine for  
building Jetspeed itself. Sometimes getting started with Maven is a  
bit challenging (but worthwhile IMO)
I would like to simplify the custom build process....

> What is the best way to start a Jetspeed-2 project?
>

Could you help us test the new Ant Custom Installation

If you could try the instructions I sent to David Dyer a few emails  
back on this list and see how it works for you
I used this approach in my last training course and everyone had it  
up and running pretty quickly, much faster than with the Maven-2  
approach
If we can get this to work I will document the process in xdocs and  
replace the current tutorial

> We have Eclipse and that would be my preferred environment to work in.
>

Ant can easily plugin into Eclipse
Additionally, the tutorial I am working on builds and deploys all PAs  
with WTP

Sorry about the delay in the new Ant tutorial and all the other  
issues that I am working on currently that I've promised people but  
are still incomplete
I had to go out of town for 9 days on business and now I can't seem  
to catch up!


> I have Tomcat 6 and can fix any little Tomcat 5 to 6 errors. but we  
> also can run on 5 if we can not get going on the current Tomcat.
> We have downloaded Maven2 but could get 1 if that is all that works.
>
> If I can strip out Maven and go with Ant, that would not be too bad  
> but at the moment, I would accept a Maven solution if it will let  
> us get started.
>
>
> Ron
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jetspeed-user-unsubscribe@portals.apache.org
> For additional commands, e-mail: jetspeed-user-help@portals.apache.org
>
>