Re: [users@httpd] startup problem: httpd-2.2.10 and undefined symbol: dav_push_error

["wt@teksavvy.com" <wt...@teksavvy.com>]

wt@teksavvy.com wrote:
> -Download httpd-2.2.10 sources and built using the following command
>
> $ ./configure --prefix=/usr/local/bin/apache2 --enable-mods-shared="dav
> dav_fs dav_lock rewrite ssl" --with-port=80
> $ make
> $ make install
>
> -modified /usr/local/bin/apache2/conf/httpd.conf by adding the following
> in the approp place
>
> LoadModule dav_lock_module modules/mod_dav_lock.so
> LoadModule ssl_module modules/mod_ssl.so
> LoadModule dav_module modules/mod_dav.so
> LoadModule rewrite_module modules/mod_rewrite.so
> LoadModule dav_fs_module modules/mod_dav_fs.so
>
> -when apache is started, I received the following.
>
>
> $ /usr/local/bin/apache2/bin/apachectl -k start
> httpd: Syntax error on line 57 of
> /usr/local/bin/apache2/conf/httpd.conf: Cannot load
> /usr/local/bin/apache2/modules/mod_dav_lock.so into server:
> /usr/local/bin/apache2/modules/mod_dav_lock.so: undefined symbol:
> dav_push_error
>
> Did I miss a switch during the ./configure call. Could someone provide
> help to solve this.
> Thanks in advance
>
> Then httpd.conf file content is listed below:
>
> #
> # This is the main Apache HTTP server configuration file.  It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
> # In particular, see
> # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do.  They're here only as hints or reminders.  If you are unsure
> # consult the online docs. You have been warned. 
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server's control files begin with "/" (or "drive:/" for Win32), the
> # server will use that explicit path.  If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
> # with ServerRoot set to "/usr/local/bin/apache2" will be interpreted by the
> # server as "/usr/local/bin/apache2/logs/foo_log".
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path.  If you point
> # ServerRoot at a non-local disk, be sure to point the LockFile directive
> # at a local disk.  If you wish to share the same ServerRoot for multiple
> # httpd daemons, you will need to change at least LockFile and PidFile.
> #
> ServerRoot "/usr/local/bin/apache2"
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:80
> Listen 80
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a
> DSO you
> # have to place corresponding `LoadModule' lines at this location so the
> # directives contained in it are actually available _before_ they are used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
>
>
> #wt;
> LoadModule dav_lock_module modules/mod_dav_lock.so
> LoadModule ssl_module modules/mod_ssl.so
> LoadModule dav_module modules/mod_dav.so
> LoadModule rewrite_module modules/mod_rewrite.so
> LoadModule dav_fs_module modules/mod_dav_fs.so
>
>
>
> <IfModule !mpm_netware_module>
> <IfModule !mpm_winnt_module>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch. 
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> #
> User daemon
> Group daemon
>
> </IfModule>
> </IfModule>
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition.  These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed.  This address appears on some server-generated pages, such
> # as error documents.  e.g. admin@your-domain.com
> #
> ServerAdmin you@example.com
>
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP address
> here.
> #
> #ServerName www.example.com:80
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "/usr/local/bin/apache2/htdocs"
>
> #
> # Each directory to which Apache has access can be configured with respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features. 
> #
> <Directory />
>     Options FollowSymLinks
>     AllowOverride None
>     Order deny,allow
>     Deny from all
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> <Directory "/usr/local/bin/apache2/htdocs">
>     #
>     # Possible values for the Options directive are "None", "All",
>     # or any combination of:
>     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> MultiViews
>     #
>     # Note that "MultiViews" must be named *explicitly* --- "Options All"
>     # doesn't give it to you.
>     #
>     # The Options directive is both complicated and important.  Please see
>     # http://httpd.apache.org/docs/2.2/mod/core.html#options
>     # for more information.
>     #
>     Options Indexes FollowSymLinks
>
>     #
>     # AllowOverride controls what directives may be placed in .htaccess
> files.
>     # It can be "All", "None", or any combination of the keywords:
>     #   Options FileInfo AuthConfig Limit
>     #
>     AllowOverride None
>
>     #
>     # Controls who can get stuff from this server.
>     #
>     Order allow,deny
>     Allow from all
>
> </Directory>
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
> <IfModule dir_module>
>     DirectoryIndex index.html
> </IfModule>
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> #
> <FilesMatch "^\.ht">
>     Order allow,deny
>     Deny from all
>     Satisfy All
> </FilesMatch>
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here.  If you *do* define an error logfile for a <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog "logs/error_log"
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> <IfModule log_config_module>
>     #
>     # The following directives define some format nicknames for use with
>     # a CustomLog directive (see below).
>     #
>     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\"" combined
>     LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
>     <IfModule logio_module>
>       # You need to enable mod_logio.c to use %I and %O
>       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\" %I %O" combinedio
>     </IfModule>
>
>     #
>     # The location and format of the access logfile (Common Logfile Format).
>     # If you do not define any access logfiles within a <VirtualHost>
>     # container, they will be logged here.  Contrariwise, if you *do*
>     # define per-<VirtualHost> access logfiles, transactions will be
>     # logged therein and *not* in this file.
>     #
>     CustomLog "logs/access_log" common
>
>     #
>     # If you prefer a logfile with access, agent, and referer information
>     # (Combined Logfile Format) you can use the following directive.
>     #
>     #CustomLog "logs/access_log" combined
> </IfModule>
>
> <IfModule alias_module>
>     #
>     # Redirect: Allows you to tell clients about documents that used to
>     # exist in your server's namespace, but do not anymore. The client
>     # will make a new request for the document at its new location.
>     # Example:
>     # Redirect permanent /foo http://www.example.com/bar
>
>     #
>     # Alias: Maps web paths into filesystem paths and is used to
>     # access content that does not live under the DocumentRoot.
>     # Example:
>     # Alias /webpath /full/filesystem/path
>     #
>     # If you include a trailing / on /webpath then the server will
>     # require it to be present in the URL.  You will also likely
>     # need to provide a <Directory> section to allow access to
>     # the filesystem path.
>
>     #
>     # ScriptAlias: This controls which directories contain server scripts.
>     # ScriptAliases are essentially the same as Aliases, except that
>     # documents in the target directory are treated as applications and
>     # run by the server when requested rather than as documents sent to the
>     # client.  The same rules about trailing "/" apply to ScriptAlias
>     # directives as to Alias.
>     #
>     ScriptAlias /cgi-bin/ "/usr/local/bin/apache2/cgi-bin/"
>
> </IfModule>
>
> <IfModule cgid_module>
>     #
>     # ScriptSock: On threaded servers, designate the path to the UNIX
>     # socket used to communicate with the CGI daemon of mod_cgid.
>     #
>     #Scriptsock logs/cgisock
> </IfModule>
>
> #
> # "/usr/local/bin/apache2/cgi-bin" should be changed to whatever your
> ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "/usr/local/bin/apache2/cgi-bin">
>     AllowOverride None
>     Options None
>     Order allow,deny
>     Allow from all
> </Directory>
>
> #
> # DefaultType: the default MIME type the server will use for a document
> # if it cannot otherwise determine one, such as from filename extensions.
> # If your server contains mostly text or HTML documents, "text/plain" is
> # a good value.  If most of your content is binary, such as applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> <IfModule mime_module>
>     #
>     # TypesConfig points to the file containing the list of mappings from
>     # filename extension to MIME-type.
>     #
>     TypesConfig conf/mime.types
>
>     #
>     # AddType allows you to add to or override the MIME configuration
>     # file specified in TypesConfig for specific file types.
>     #
>     #AddType application/x-gzip .tgz
>     #
>     # AddEncoding allows you to have certain browsers uncompress
>     # information on the fly. Note: Not all browsers support this.
>     #
>     #AddEncoding x-compress .Z
>     #AddEncoding x-gzip .gz .tgz
>     #
>     # If the AddEncoding directives above are commented-out, then you
>     # probably should define those extensions to indicate media types:
>     #
>     AddType application/x-compress .Z
>     AddType application/x-gzip .gz .tgz
>
>     #
>     # AddHandler allows you to map certain file extensions to "handlers":
>     # actions unrelated to filetype. These can be either built into the
> server
>     # or added with the Action directive (see below)
>     #
>     # To use CGI scripts outside of ScriptAliased directories:
>     # (You will also need to add "ExecCGI" to the "Options" directive.)
>     #
>     #AddHandler cgi-script .cgi
>
>     # For type maps (negotiated resources):
>     #AddHandler type-map var
>
>     #
>     # Filters allow you to process content before it is sent to the client.
>     #
>     # To parse .shtml files for server-side includes (SSI):
>     # (You will also need to add "Includes" to the "Options" directive.)
>     #
>     #AddType text/html .shtml
>     #AddOutputFilter INCLUDES .shtml
> </IfModule>
>
> #
> # The mod_mime_magic module allows the server to use various hints from the
> # contents of the file itself to determine its type.  The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile conf/magic
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://www.example.com/subscription_info.html
> #
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall is used to deliver
> # files.  This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> #
> #EnableMMAP off
> #EnableSendfile off
>
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default configuration of
> # the server, or you may simply copy their contents here and change as
> # necessary.
>
> # Server-pool management (MPM specific)
> #Include conf/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings
> #Include conf/extra/httpd-autoindex.conf
>
> # Language settings
> #Include conf/extra/httpd-languages.conf
>
> # User home directories
> #Include conf/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> #Include conf/extra/httpd-info.conf
>
> # Virtual hosts
> #Include conf/extra/httpd-vhosts.conf
>
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Include conf/extra/httpd-dav.conf
>
> # Various default settings
> #Include conf/extra/httpd-default.conf
>
> # Secure (SSL/TLS) connections
> Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> #       starting without SSL on platforms with no /dev/random equivalent
> #       but a statically compiled-in mod_ssl.
> #
> <IfModule ssl_module>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
> </IfModule>
>
>
>
>
> ---------------------------------------------------------------------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See <URL:http://httpd.apache.org/userslist.html> for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>    "   from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>   
Hello All,

Is there no one who can help out on this one?  I basically downloaded
the source for httpd-2.2.10 configured/compile the source.  When I try
to startup apache, I get an error on the console indicating that there
was a problem loading mod_dav_lock.so because of an undefined symbol
called dav_push_error.

Thanks


---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
   "   from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org