You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by Radha Manickam <ra...@gmail.com> on 2009/10/22 11:47:21 UTC
Installing Activemq-cpp in HP-UX
Can anyone help on how to install activemq-cpp in hp-ux.
I am using 3.0 version of activemq-cpp.
When i tried to configure, i got the following error message.
checking for time... yes
checking for ftime... yes
checking for cppunit-config... /usr/local/bin/cppunit-config
checking for Cppunit - version >= 1.10.2... 1.12.1
checking for pthread_create in -lpthread... no
configure: error: libpthread not found!
Where can i found libpthread.
Thanks in advance
--
View this message in context: http://www.nabble.com/Installing-Activemq-cpp-in-HP-UX-tp26007199p26007199.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Installing Activemq-cpp in HP-UX
Posted by Timothy Bish <ta...@gmail.com>.
Is it possible for you to build with debug information turned on? Without
the full stack trace from the crash its not clear where or why this would be
happening.
if you are building with GCC then you can try this when you run configure
./configure --enable-shared=no CXXFLAGS="-g -O0"
This will build the examples with static libraries linked in and add
debugging symbols to the build and disable optimization which will make the
stack traces more useful.
Regards
Tim.
Radha Manickam wrote:
>
> Hi,
>
> We did the same thing and got installed the activemq-cpp.
> But when tried to compile the example program(main.cpp) that is given in
> the activemq-cpp/examples, we got the error as follows:
>
> # ./main
> Memory fault(coredump)
>
> This is the trace that i got for the core created.
>
> # gdb ./main core
> HP gdb 5.0 for PA-RISC 1.1 or 2.0 (narrow), HP-UX 11.00
> and target hppa1.1-hp-hpux11.00.
> Copyright 1986 - 2001 Free Software Foundation, Inc.
> Hewlett-Packard Wildebeest 5.0 (based on GDB) is covered by the
> GNU General Public License. Type "show copying" to see the conditions to
> change it and/or distribute copies. Type "show warranty" for
> warranty/support.
> ..(no debugging symbols found)...
> Core was generated by `main'.
> Program terminated with signal 11, Segmentation fault.
> (no debugging symbols found)...
> warning: Load module /usr/local/lib/libstdc++.sl has been stripped
>
> #0 0xc056e888 in cma__val_defattr_stat+0x98 () from /usr/lib/libcma.2
> (gdb) trace
> trace command requires an argument
> (gdb) info threads
> * 1 user thread (6009337, 0) 0xc056e888 in cma__val_defattr_stat+0x98
> () from /usr/lib/libcma.2
> (gdb) thread apply all bt full
>
> Thread 1 (user thread (6009337, 0)):
> #0 0xc056e888 in cma__val_defattr_stat+0x98 () from /usr/lib/libcma.2
> No symbol table info available.
> #1 0xc0579fb4 in pthread_mutex_init+0x104 () from /usr/lib/libcma.2
> No symbol table info available.
> #2 0xc021d3ec in libc_init+0x6c () from /usr/lib/libc.2
> No symbol table info available.
> #3 0xc021cb78 in __libc_init+0xf0 () from /usr/lib/libc.2
> No symbol table info available.
> #4 0xc0047b30 in __hp__init_libc+0x28 () from /usr/lib/libpthread.1
> No symbol table info available.
> #5 0xc0049b44 in __pthread_startup+0x228 () from /usr/lib/libpthread.1
> No symbol table info available.
> #6 0xc0019260 in stat64+0xbffece30 () from /usr/lib/dld.sl
> No symbol table info available.
> #7 0xc0579fb4 in pthread_mutex_init+0x104 () from /usr/lib/libcma.2
> No symbol table info available.
> Cannot access memory at address 0xc0017d64
>
>
> We need a help on this issue.
>
> Radha.
>
--
View this message in context: http://old.nabble.com/Installing-Activemq-cpp-in-HP-UX-tp26007199p26203574.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Installing Activemq-cpp in HP-UX
Posted by Ivan Pechorin <iv...@gmail.com>.
One of possible reasons of crash in __pthread_startup could be "-mt" flag
missing in LDFLAGS...
I've seen this few months ago on HP-UX 11i v2 (11.23) on IA64 platform with
latest version of HP aCC compiler. Not sure if it is applicable to GCC
build.
--
View this message in context: http://old.nabble.com/Installing-Activemq-cpp-in-HP-UX-tp26007199p27323857.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Installing Activemq-cpp in HP-UX
Posted by Radha Manickam <ra...@gmail.com>.
Hi,
We did the same thing and got installed the activemq-cpp.
But when tried to compile the example program(main.cpp) that is given in the
activemq-cpp/examples, we got the error as follows:
# ./main
Memory fault(coredump)
This is the trace that i got for the core created.
# gdb ./main core
HP gdb 5.0 for PA-RISC 1.1 or 2.0 (narrow), HP-UX 11.00
and target hppa1.1-hp-hpux11.00.
Copyright 1986 - 2001 Free Software Foundation, Inc.
Hewlett-Packard Wildebeest 5.0 (based on GDB) is covered by the
GNU General Public License. Type "show copying" to see the conditions to
change it and/or distribute copies. Type "show warranty" for
warranty/support.
..(no debugging symbols found)...
Core was generated by `main'.
Program terminated with signal 11, Segmentation fault.
(no debugging symbols found)...
warning: Load module /usr/local/lib/libstdc++.sl has been stripped
#0 0xc056e888 in cma__val_defattr_stat+0x98 () from /usr/lib/libcma.2
(gdb) trace
trace command requires an argument
(gdb) info threads
* 1 user thread (6009337, 0) 0xc056e888 in cma__val_defattr_stat+0x98 ()
from /usr/lib/libcma.2
(gdb) thread apply all bt full
Thread 1 (user thread (6009337, 0)):
#0 0xc056e888 in cma__val_defattr_stat+0x98 () from /usr/lib/libcma.2
No symbol table info available.
#1 0xc0579fb4 in pthread_mutex_init+0x104 () from /usr/lib/libcma.2
No symbol table info available.
#2 0xc021d3ec in libc_init+0x6c () from /usr/lib/libc.2
No symbol table info available.
#3 0xc021cb78 in __libc_init+0xf0 () from /usr/lib/libc.2
No symbol table info available.
#4 0xc0047b30 in __hp__init_libc+0x28 () from /usr/lib/libpthread.1
No symbol table info available.
#5 0xc0049b44 in __pthread_startup+0x228 () from /usr/lib/libpthread.1
No symbol table info available.
#6 0xc0019260 in stat64+0xbffece30 () from /usr/lib/dld.sl
No symbol table info available.
#7 0xc0579fb4 in pthread_mutex_init+0x104 () from /usr/lib/libcma.2
No symbol table info available.
Cannot access memory at address 0xc0017d64
We need a help on this issue.
Radha.
--
View this message in context: http://old.nabble.com/Installing-Activemq-cpp-in-HP-UX-tp26007199p26125741.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Installing Activemq-cpp in HP-UX
Posted by Timothy Bish <ta...@gmail.com>.
On Mon, 2009-10-26 at 22:37 -0700, Radha Manickam wrote:
> Hi Tim,
>
> I have attached the config.log.
>
> Radha.
>>From what I've read about the HP UX pthreads impl it sounds as if
there's some problems with the way they've defined the pthread_create
which break autoconfs tests. You could modify this portion of the
configure.ac to remove the AC_CHECK_LIB and just set the LIBS with the
libraries that you need on HP UX to compile, not sure any change is
necessary. Once done just run ./autogen.sh and you should have a
working configure script.
*) ## Unix configuration
AC_CHECK_LIB(pthread, pthread_create,[have_pthread="yes"],
AC_MSG_ERROR([libpthread not found!]))
PLAT_CXXFLAGS="-ansi -pedantic"
PLAT_LIBS="-lm -lpthread -luuid"
Regards
Tim.
>
>
> Timothy Bish wrote:
> >
> > On Thu, 2009-10-22 at 22:22 -0700, Radha Manickam wrote:
> >> Hi,
> >>
> >> I am using Actimemq-cpp version 3.0.
> >> Autoconf ==> 2.64
> >> Automake ==> 1.11
> >> libtool ==> 2.2.6
> >> gcc ==> 4.2.3
> >>
> >> I have installed all the dependencies.
> >> I am able to install Apr and apr-util without any error.
> >> But not able to compile activemq-cpp.
> >>
> >> Thanks.
> >> Radha.
> >
> > I'd need to take a look at your config.log file to see if there's any
> > indication in there about what is causing the error. You are welcome to
> > open a new Jira issue and attach a the log.
> >
> > Regards
> > Tim.
> >
> >
> > --
> > Tim Bish
> > http://fusesource.com
> > http://timbish.blogspot.com/
> >
> >
> >
> >
> >
> http://www.nabble.com/file/p26072354/config.log config.log
--
Tim Bish
http://fusesource.com
http://timbish.blogspot.com/
Re: Installing Activemq-cpp in HP-UX
Posted by Radha Manickam <ra...@gmail.com>.
Hi Tim,
I have attached the config.log.
Radha.
Timothy Bish wrote:
>
> On Thu, 2009-10-22 at 22:22 -0700, Radha Manickam wrote:
>> Hi,
>>
>> I am using Actimemq-cpp version 3.0.
>> Autoconf ==> 2.64
>> Automake ==> 1.11
>> libtool ==> 2.2.6
>> gcc ==> 4.2.3
>>
>> I have installed all the dependencies.
>> I am able to install Apr and apr-util without any error.
>> But not able to compile activemq-cpp.
>>
>> Thanks.
>> Radha.
>
> I'd need to take a look at your config.log file to see if there's any
> indication in there about what is causing the error. You are welcome to
> open a new Jira issue and attach a the log.
>
> Regards
> Tim.
>
>
> --
> Tim Bish
> http://fusesource.com
> http://timbish.blogspot.com/
>
>
>
>
>
http://www.nabble.com/file/p26072354/config.log config.log
--
View this message in context: http://www.nabble.com/Installing-Activemq-cpp-in-HP-UX-tp26007199p26072354.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Installing Activemq-cpp in HP-UX
Posted by Timothy Bish <ta...@gmail.com>.
On Thu, 2009-10-22 at 22:22 -0700, Radha Manickam wrote:
> Hi,
>
> I am using Actimemq-cpp version 3.0.
> Autoconf ==> 2.64
> Automake ==> 1.11
> libtool ==> 2.2.6
> gcc ==> 4.2.3
>
> I have installed all the dependencies.
> I am able to install Apr and apr-util without any error.
> But not able to compile activemq-cpp.
>
> Thanks.
> Radha.
I'd need to take a look at your config.log file to see if there's any
indication in there about what is causing the error. You are welcome to
open a new Jira issue and attach a the log.
Regards
Tim.
--
Tim Bish
http://fusesource.com
http://timbish.blogspot.com/
Re: Installing Activemq-cpp in HP-UX
Posted by Radha Manickam <ra...@gmail.com>.
Hi,
I am using Actimemq-cpp version 3.0.
Autoconf ==> 2.64
Automake ==> 1.11
libtool ==> 2.2.6
gcc ==> 4.2.3
I have installed all the dependencies.
I am able to install Apr and apr-util without any error.
But not able to compile activemq-cpp.
Thanks.
Radha.
--
View this message in context: http://www.nabble.com/Installing-Activemq-cpp-in-HP-UX-tp26007199p26021054.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Installing Activemq-cpp in HP-UX
Posted by Timothy Bish <ta...@gmail.com>.
On Thu, 2009-10-22 at 04:29 -0700, Radha Manickam wrote:
> Hi Tim,
>
>
> I have libpthread installed in /usr/lib/.
>
> I added the path in SHLIB_PATH.
>
> Even though i got the same error.
>
> I am compiling using gcc.
>
Which version of ActiveMQ-CPP are you using?
What versions do you have for autoconf, automake, libtool, gcc ?
Hard to help without more info on your setup.
Regards
Tim.
>
> Radha.
>
>
> Timothy Bish wrote:
> >
> > On Thu, 2009-10-22 at 02:47 -0700, Radha Manickam wrote:
> >> Can anyone help on how to install activemq-cpp in hp-ux.
> >> I am using 3.0 version of activemq-cpp.
> >>
> >> When i tried to configure, i got the following error message.
> >>
> >>
> >> checking for time... yes
> >>
> >> checking for ftime... yes
> >>
> >> checking for cppunit-config... /usr/local/bin/cppunit-config
> >>
> >> checking for Cppunit - version >= 1.10.2... 1.12.1
> >>
> >> checking for pthread_create in -lpthread... no
> >>
> >> configure: error: libpthread not found!
> >>
> >>
> >> Where can i found libpthread.
> >
> > libpthread is usually found in either /usr/lib and pthread.h is
> > in /usr/include. If you have the locate command you can try running
> > `locate libpthread`
> >
> > Regards
> > Tim.
> >
> >
> >
> >
> >
>
--
Tim Bish
http://fusesource.com
http://timbish.blogspot.com/
Re: Installing Activemq-cpp in HP-UX
Posted by Radha Manickam <ra...@gmail.com>.
Hi Tim,
I have libpthread installed in /usr/lib/.
I added the path in SHLIB_PATH.
Even though i got the same error.
I am compiling using gcc.
Radha.
Timothy Bish wrote:
>
> On Thu, 2009-10-22 at 02:47 -0700, Radha Manickam wrote:
>> Can anyone help on how to install activemq-cpp in hp-ux.
>> I am using 3.0 version of activemq-cpp.
>>
>> When i tried to configure, i got the following error message.
>>
>>
>> checking for time... yes
>>
>> checking for ftime... yes
>>
>> checking for cppunit-config... /usr/local/bin/cppunit-config
>>
>> checking for Cppunit - version >= 1.10.2... 1.12.1
>>
>> checking for pthread_create in -lpthread... no
>>
>> configure: error: libpthread not found!
>>
>>
>> Where can i found libpthread.
>
> libpthread is usually found in either /usr/lib and pthread.h is
> in /usr/include. If you have the locate command you can try running
> `locate libpthread`
>
> Regards
> Tim.
>
>
>
>
>
--
View this message in context: http://www.nabble.com/Installing-Activemq-cpp-in-HP-UX-tp26007199p26008333.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
Re: Installing Activemq-cpp in HP-UX
Posted by Timothy Bish <ta...@gmail.com>.
On Thu, 2009-10-22 at 02:47 -0700, Radha Manickam wrote:
> Can anyone help on how to install activemq-cpp in hp-ux.
> I am using 3.0 version of activemq-cpp.
>
> When i tried to configure, i got the following error message.
>
>
> checking for time... yes
>
> checking for ftime... yes
>
> checking for cppunit-config... /usr/local/bin/cppunit-config
>
> checking for Cppunit - version >= 1.10.2... 1.12.1
>
> checking for pthread_create in -lpthread... no
>
> configure: error: libpthread not found!
>
>
> Where can i found libpthread.
libpthread is usually found in either /usr/lib and pthread.h is
in /usr/include. If you have the locate command you can try running
`locate libpthread`
Regards
Tim.