You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@jmeter.apache.org by Sonam Chauhan <so...@ce.com.au> on 2010/02/11 23:34:06 UTC
__XPath problems
Hello:
I've run into some problems with the __XPath function. I use it as the 'Value' of a HTTP sampler parameter:
-----------------------------------------------------
${__XPath(prodcodes.xml, /root/code)}
-----------------------------------------------------
This obtains a product code from the prodcodes.xml file, whose content looks like this:
-----------------------------------------------------
<?xml version="1.0"?>
<root>
<code>00000123</code>
<code>00001234</code>
<code>00012345</code>
...
</root>
-----------------------------------------------------
However, this __XPath function call always evaluates to value "null".
The jmeter.log simply notes the prodcodes.xml file being used, and then 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a product code:
-----------------------------------------------------
2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration Tests Thread Group 1-1: Opening prodcodes.xml
2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread detected by thread Integration Tests Thread Group 1-1
-----------------------------------------------------
Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I didn't see any bugzilla entries for __XPath
Regards,
Sonam Chauhan
PS: I use __XPath() because the HTTP sampler runs within a loop and it needs to use a new product code in every iteration of the loop. CSV Data Set Config et al allocate one config item per thread.
The information contained in this email and any attached files are strictly
private and confidential. This email should be read by the intended addressee
only. If the recipient of this message is not the intended addressee, please
call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate Express
New Zealand Limited on +64 9 271 7600 and promptly delete this email and any
attachments. The intended recipient of this email may only use, reproduce,
disclose or distribute the information contained in this email and any attached
files with Corporate Express' permission. If you are not the intended addressee,
you are strictly prohibited from using, reproducing, disclosing or distributing
the information contained in this email and any attached files. Corporate
Express advises that this email and any attached files should be scanned to
detect viruses. Corporate Express accepts no liability for loss or damage
(whether caused by negligence or not) resulting from the use of any attached
files.
Re: __XPath problems
Posted by Deepak Shetty <sh...@gmail.com>.
try ${__XPath(prodcodes.xml, /root/code/text())}. Also upgrade to latest
jmeter.
>CSV Data Set Config et al allocate one config item per thread.
Im not sure what you mean by this. you can vary the sharing mode to arrive
at different results.
regards
deepak
On Thu, Feb 11, 2010 at 2:34 PM, Sonam Chauhan <so...@ce.com.au>wrote:
> Hello:
>
> I've run into some problems with the __XPath function. I use it as the
> 'Value' of a HTTP sampler parameter:
> -----------------------------------------------------
> ${__XPath(prodcodes.xml, /root/code)}
> -----------------------------------------------------
>
> This obtains a product code from the prodcodes.xml file, whose content
> looks like this:
> -----------------------------------------------------
> <?xml version="1.0"?>
> <root>
> <code>00000123</code>
> <code>00001234</code>
> <code>00012345</code>
> ...
> </root>
> -----------------------------------------------------
>
> However, this __XPath function call always evaluates to value "null".
>
> The jmeter.log simply notes the prodcodes.xml file being used, and then
> 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a
> product code:
> -----------------------------------------------------
> 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration
> Tests Thread Group 1-1: Opening prodcodes.xml
> 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread
> detected by thread Integration Tests Thread Group 1-1
> -----------------------------------------------------
>
>
> Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I didn't
> see any bugzilla entries for __XPath
>
> Regards,
> Sonam Chauhan
>
> PS: I use __XPath() because the HTTP sampler runs within a loop and it
> needs to use a new product code in every iteration of the loop. CSV Data Set
> Config et al allocate one config item per thread.
>
>
>
> The information contained in this email and any attached files are strictly
> private and confidential. This email should be read by the intended
> addressee
> only. If the recipient of this message is not the intended addressee,
> please
> call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate
> Express
> New Zealand Limited on +64 9 271 7600 and promptly delete this email and
> any
> attachments. The intended recipient of this email may only use, reproduce,
> disclose or distribute the information contained in this email and any
> attached
> files with Corporate Express' permission. If you are not the intended
> addressee,
> you are strictly prohibited from using, reproducing, disclosing or
> distributing
> the information contained in this email and any attached files. Corporate
> Express advises that this email and any attached files should be scanned to
> detect viruses. Corporate Express accepts no liability for loss or damage
> (whether caused by negligence or not) resulting from the use of any
> attached
> files.
>
Re: __XPath problems
Posted by sebb <se...@gmail.com>.
On 12/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > CSV Dataset produces one line for each parent controller iteration.
>
>
> Thanks - that's very helpful.
>
>
> > The function __StringFromFile needs to be used either on the sampler
> > or on a User Parameters Pre-Processor so that it is called each time
> > you need another line.
>
>
> Actually, my mistake - I had tried __CSVRead (which seems to do once per thread)
CSVRead works much the same as StringFromFile, but you have to
remember to call next to advance the pointer.
> and thought I'd tried __StringFromFile also, but __StringFromFile seems to work now!
>
> :-)
>
> Thanks for your help!
>
>
> Sonam
>
>
>
> -----Original Message-----
> From: sebb [mailto:sebbaz@gmail.com]
>
> Sent: Friday, 12 February 2010 10:53 AM
> To: JMeter Users List
> Subject: Re: __XPath problems
>
> On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > > However you could just use __StringFromFile() instead.
> > > Or CSV Dataset - just ensure it is in the loop.
> >
> >
> > Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset within the loop - it works.
> >
> > Previously, I had tried using both __StringFromFile() and CSV Dataset earlier, but at the top of the test plan instead of within the loop as you suggested. That gave me the same code for each loop iteration.
>
> The function __StringFromFile needs to be used either on the sampler
> or on a User Parameters Pre-Processor so that it is called each time
> you need another line.
>
> CSV Dataset produces one line for each parent controller iteration.
>
> >
> > > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
> >
> >
> > I also tried the latest 2.3.4 release and the same __XPath() problem exists there too.
> >
> > Regards,
> > Sonam
> >
> >
> >
> > -----Original Message-----
> > From: sebb [mailto:sebbaz@gmail.com]
> > Sent: Friday, 12 February 2010 10:09 AM
> > To: JMeter Users List
> > Subject: Re: __XPath problems
> >
> > On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > > Hello:
> > >
> > > I've run into some problems with the __XPath function. I use it as the 'Value' of a HTTP sampler parameter:
> > > -----------------------------------------------------
> > > ${__XPath(prodcodes.xml, /root/code)}
> > > -----------------------------------------------------
> > >
> > > This obtains a product code from the prodcodes.xml file, whose content looks like this:
> > > -----------------------------------------------------
> > > <?xml version="1.0"?>
> > > <root>
> > > <code>00000123</code>
> > > <code>00001234</code>
> > > <code>00012345</code>
> > > ...
> > > </root>
> > > -----------------------------------------------------
> > >
> > > However, this __XPath function call always evaluates to value "null".
> > >
> > > The jmeter.log simply notes the prodcodes.xml file being used, and then 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a product code:
> > > -----------------------------------------------------
> > > 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration Tests Thread Group 1-1: Opening prodcodes.xml
> > > 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread detected by thread Integration Tests Thread Group 1-1
> > > -----------------------------------------------------
> > >
> > >
> > > Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I didn't see any bugzilla entries for __XPath
> >
> > No idea what the problem is, sorry.
> >
> > However you could just use __StringFromFile() instead.
> >
> > Or CSV Dataset - just ensure it is in the loop.
> >
> > BTW, it's easy to test functions etc using Java Request - just put the
> > function call in the "Label" field and it will show up in the
> > Listeners.
> >
> > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
> >
> >
> > > Regards,
> > > Sonam Chauhan
> > >
> > > PS: I use __XPath() because the HTTP sampler runs within a loop and it needs to use a new product code in every iteration of the loop. CSV Data Set Config et al allocate one config item per thread.
> > >
> > >
> > >
> > > The information contained in this email and any attached files are strictly
> > > private and confidential. This email should be read by the intended addressee
> > > only. If the recipient of this message is not the intended addressee, please
> > > call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate Express
> > > New Zealand Limited on +64 9 271 7600 and promptly delete this email and any
> > > attachments. The intended recipient of this email may only use, reproduce,
> > > disclose or distribute the information contained in this email and any attached
> > > files with Corporate Express' permission. If you are not the intended addressee,
> > > you are strictly prohibited from using, reproducing, disclosing or distributing
> > > the information contained in this email and any attached files. Corporate
> > > Express advises that this email and any attached files should be scanned to
> > > detect viruses. Corporate Express accepts no liability for loss or damage
> > > (whether caused by negligence or not) resulting from the use of any attached
> > > files.
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
RE: __XPath problems
Posted by Sonam Chauhan <so...@ce.com.au>.
> CSV Dataset produces one line for each parent controller iteration.
Thanks - that's very helpful.
> The function __StringFromFile needs to be used either on the sampler
> or on a User Parameters Pre-Processor so that it is called each time
> you need another line.
Actually, my mistake - I had tried __CSVRead (which seems to do once per thread) and thought I'd tried __StringFromFile also, but __StringFromFile seems to work now!
:-)
Thanks for your help!
Sonam
-----Original Message-----
From: sebb [mailto:sebbaz@gmail.com]
Sent: Friday, 12 February 2010 10:53 AM
To: JMeter Users List
Subject: Re: __XPath problems
On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > However you could just use __StringFromFile() instead.
> > Or CSV Dataset - just ensure it is in the loop.
>
>
> Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset within the loop - it works.
>
> Previously, I had tried using both __StringFromFile() and CSV Dataset earlier, but at the top of the test plan instead of within the loop as you suggested. That gave me the same code for each loop iteration.
The function __StringFromFile needs to be used either on the sampler
or on a User Parameters Pre-Processor so that it is called each time
you need another line.
CSV Dataset produces one line for each parent controller iteration.
>
> > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
>
> I also tried the latest 2.3.4 release and the same __XPath() problem exists there too.
>
> Regards,
> Sonam
>
>
>
> -----Original Message-----
> From: sebb [mailto:sebbaz@gmail.com]
> Sent: Friday, 12 February 2010 10:09 AM
> To: JMeter Users List
> Subject: Re: __XPath problems
>
> On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > Hello:
> >
> > I've run into some problems with the __XPath function. I use it as the 'Value' of a HTTP sampler parameter:
> > -----------------------------------------------------
> > ${__XPath(prodcodes.xml, /root/code)}
> > -----------------------------------------------------
> >
> > This obtains a product code from the prodcodes.xml file, whose content looks like this:
> > -----------------------------------------------------
> > <?xml version="1.0"?>
> > <root>
> > <code>00000123</code>
> > <code>00001234</code>
> > <code>00012345</code>
> > ...
> > </root>
> > -----------------------------------------------------
> >
> > However, this __XPath function call always evaluates to value "null".
> >
> > The jmeter.log simply notes the prodcodes.xml file being used, and then 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a product code:
> > -----------------------------------------------------
> > 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration Tests Thread Group 1-1: Opening prodcodes.xml
> > 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread detected by thread Integration Tests Thread Group 1-1
> > -----------------------------------------------------
> >
> >
> > Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I didn't see any bugzilla entries for __XPath
>
> No idea what the problem is, sorry.
>
> However you could just use __StringFromFile() instead.
>
> Or CSV Dataset - just ensure it is in the loop.
>
> BTW, it's easy to test functions etc using Java Request - just put the
> function call in the "Label" field and it will show up in the
> Listeners.
>
> Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
>
> > Regards,
> > Sonam Chauhan
> >
> > PS: I use __XPath() because the HTTP sampler runs within a loop and it needs to use a new product code in every iteration of the loop. CSV Data Set Config et al allocate one config item per thread.
> >
> >
> >
> > The information contained in this email and any attached files are strictly
> > private and confidential. This email should be read by the intended addressee
> > only. If the recipient of this message is not the intended addressee, please
> > call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate Express
> > New Zealand Limited on +64 9 271 7600 and promptly delete this email and any
> > attachments. The intended recipient of this email may only use, reproduce,
> > disclose or distribute the information contained in this email and any attached
> > files with Corporate Express' permission. If you are not the intended addressee,
> > you are strictly prohibited from using, reproducing, disclosing or distributing
> > the information contained in this email and any attached files. Corporate
> > Express advises that this email and any attached files should be scanned to
> > detect viruses. Corporate Express accepts no liability for loss or damage
> > (whether caused by negligence or not) resulting from the use of any attached
> > files.
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: __XPath problems
Posted by sebb <se...@gmail.com>.
On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > However you could just use __StringFromFile() instead.
> > Or CSV Dataset - just ensure it is in the loop.
>
>
> Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset within the loop - it works.
>
> Previously, I had tried using both __StringFromFile() and CSV Dataset earlier, but at the top of the test plan instead of within the loop as you suggested. That gave me the same code for each loop iteration.
The function __StringFromFile needs to be used either on the sampler
or on a User Parameters Pre-Processor so that it is called each time
you need another line.
CSV Dataset produces one line for each parent controller iteration.
>
> > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
>
> I also tried the latest 2.3.4 release and the same __XPath() problem exists there too.
>
> Regards,
> Sonam
>
>
>
> -----Original Message-----
> From: sebb [mailto:sebbaz@gmail.com]
> Sent: Friday, 12 February 2010 10:09 AM
> To: JMeter Users List
> Subject: Re: __XPath problems
>
> On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > Hello:
> >
> > I've run into some problems with the __XPath function. I use it as the 'Value' of a HTTP sampler parameter:
> > -----------------------------------------------------
> > ${__XPath(prodcodes.xml, /root/code)}
> > -----------------------------------------------------
> >
> > This obtains a product code from the prodcodes.xml file, whose content looks like this:
> > -----------------------------------------------------
> > <?xml version="1.0"?>
> > <root>
> > <code>00000123</code>
> > <code>00001234</code>
> > <code>00012345</code>
> > ...
> > </root>
> > -----------------------------------------------------
> >
> > However, this __XPath function call always evaluates to value "null".
> >
> > The jmeter.log simply notes the prodcodes.xml file being used, and then 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a product code:
> > -----------------------------------------------------
> > 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration Tests Thread Group 1-1: Opening prodcodes.xml
> > 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread detected by thread Integration Tests Thread Group 1-1
> > -----------------------------------------------------
> >
> >
> > Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I didn't see any bugzilla entries for __XPath
>
> No idea what the problem is, sorry.
>
> However you could just use __StringFromFile() instead.
>
> Or CSV Dataset - just ensure it is in the loop.
>
> BTW, it's easy to test functions etc using Java Request - just put the
> function call in the "Label" field and it will show up in the
> Listeners.
>
> Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
>
> > Regards,
> > Sonam Chauhan
> >
> > PS: I use __XPath() because the HTTP sampler runs within a loop and it needs to use a new product code in every iteration of the loop. CSV Data Set Config et al allocate one config item per thread.
> >
> >
> >
> > The information contained in this email and any attached files are strictly
> > private and confidential. This email should be read by the intended addressee
> > only. If the recipient of this message is not the intended addressee, please
> > call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate Express
> > New Zealand Limited on +64 9 271 7600 and promptly delete this email and any
> > attachments. The intended recipient of this email may only use, reproduce,
> > disclose or distribute the information contained in this email and any attached
> > files with Corporate Express' permission. If you are not the intended addressee,
> > you are strictly prohibited from using, reproducing, disclosing or distributing
> > the information contained in this email and any attached files. Corporate
> > Express advises that this email and any attached files should be scanned to
> > detect viruses. Corporate Express accepts no liability for loss or damage
> > (whether caused by negligence or not) resulting from the use of any attached
> > files.
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
RE: __XPath problems
Posted by Sonam Chauhan <so...@ce.com.au>.
I still don't understand why both queries don't work, but the script is working. :)
Thanks for your help!
-----Original Message-----
From: Deepak Shetty [mailto:shettyd@gmail.com]
Sent: Friday, 12 February 2010 10:54 AM
To: JMeter Users List
Subject: Re: __XPath problems
/root/code definitely does work in XSLT - however here it is clearly
defined that the selected value of a node is the concatenation of the all
the child nodes.
But DOM based stuff would not, since the value of this selected Node is
null, and you have to get the children text nodes and get their values. So
it depends on how this has been implemented, If the XPATH simply selects the
DOM Node and then calls getValue on it, you would observe the behavior that
you got.
On Thu, Feb 11, 2010 at 3:46 PM, Sonam Chauhan <so...@ce.com.au>wrote:
>
> > /root/code/text() works on 2.3.4
>
> Thanks Deepak - I've verified this for 2.3.1 as well.
>
> I was using /root/code, instead of /root/code/text()
>
> I thought /root/code is valid XPath too?
>
>
> Sonam
>
> PS: The CSV data set config you mentioned in your other email was in 2.3.4
> and seemed to apply for inter-thread sharing only.
>
> -----Original Message-----
> From: Deepak Shetty [mailto:shettyd@gmail.com]
> Sent: Friday, 12 February 2010 10:36 AM
> To: JMeter Users List
> Subject: Re: __XPath problems
>
> /root/code/text() works on 2.3.4
>
> On Thu, Feb 11, 2010 at 3:33 PM, Sonam Chauhan <sonam.chauhan@ce.com.au
> >wrote:
>
> > > However you could just use __StringFromFile() instead.
> > > Or CSV Dataset - just ensure it is in the loop.
> >
> > Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset
> within
> > the loop - it works.
> >
> > Previously, I had tried using both __StringFromFile() and CSV Dataset
> > earlier, but at the top of the test plan instead of within the loop as
> you
> > suggested. That gave me the same code for each loop iteration.
> >
> > > Also, 2.3.1 is really old; there have been lots of bug fixes since
> then.
> >
> > I also tried the latest 2.3.4 release and the same __XPath() problem
> exists
> > there too.
> >
> > Regards,
> > Sonam
> >
> >
> > -----Original Message-----
> > From: sebb [mailto:sebbaz@gmail.com]
> > Sent: Friday, 12 February 2010 10:09 AM
> > To: JMeter Users List
> > Subject: Re: __XPath problems
> >
> > On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > > Hello:
> > >
> > > I've run into some problems with the __XPath function. I use it as
> the
> > 'Value' of a HTTP sampler parameter:
> > > -----------------------------------------------------
> > > ${__XPath(prodcodes.xml, /root/code)}
> > > -----------------------------------------------------
> > >
> > > This obtains a product code from the prodcodes.xml file, whose content
> > looks like this:
> > > -----------------------------------------------------
> > > <?xml version="1.0"?>
> > > <root>
> > > <code>00000123</code>
> > > <code>00001234</code>
> > > <code>00012345</code>
> > > ...
> > > </root>
> > > -----------------------------------------------------
> > >
> > > However, this __XPath function call always evaluates to value "null".
> > >
> > > The jmeter.log simply notes the prodcodes.xml file being used, and
> then
> > 'Stop Thread' signal when the HTTP sampler fails due to "null" not being
> a
> > product code:
> > > -----------------------------------------------------
> > > 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration
> > Tests Thread Group 1-1: Opening prodcodes.xml
> > > 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread
> > detected by thread Integration Tests Thread Group 1-1
> > > -----------------------------------------------------
> > >
> > >
> > > Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I
> > didn't see any bugzilla entries for __XPath
> >
> > No idea what the problem is, sorry.
> >
> > However you could just use __StringFromFile() instead.
> >
> > Or CSV Dataset - just ensure it is in the loop.
> >
> > BTW, it's easy to test functions etc using Java Request - just put the
> > function call in the "Label" field and it will show up in the
> > Listeners.
> >
> > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
> >
> >
> > > Regards,
> > > Sonam Chauhan
> > >
> > > PS: I use __XPath() because the HTTP sampler runs within a loop and it
> > needs to use a new product code in every iteration of the loop. CSV Data
> Set
> > Config et al allocate one config item per thread.
> > >
> > >
> > >
> > > The information contained in this email and any attached files are
> > strictly
> > > private and confidential. This email should be read by the intended
> > addressee
> > > only. If the recipient of this message is not the intended addressee,
> > please
> > > call Corporate Express Australia Limited on +61 2 9335 0555 or
> Corporate
> > Express
> > > New Zealand Limited on +64 9 271 7600 and promptly delete this email
> and
> > any
> > > attachments. The intended recipient of this email may only use,
> > reproduce,
> > > disclose or distribute the information contained in this email and any
> > attached
> > > files with Corporate Express' permission. If you are not the intended
> > addressee,
> > > you are strictly prohibited from using, reproducing, disclosing or
> > distributing
> > > the information contained in this email and any attached files.
> > Corporate
> > > Express advises that this email and any attached files should be
> scanned
> > to
> > > detect viruses. Corporate Express accepts no liability for loss or
> > damage
> > > (whether caused by negligence or not) resulting from the use of any
> > attached
> > > files.
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: __XPath problems
Posted by Deepak Shetty <sh...@gmail.com>.
/root/code definitely does work in XSLT - however here it is clearly
defined that the selected value of a node is the concatenation of the all
the child nodes.
But DOM based stuff would not, since the value of this selected Node is
null, and you have to get the children text nodes and get their values. So
it depends on how this has been implemented, If the XPATH simply selects the
DOM Node and then calls getValue on it, you would observe the behavior that
you got.
On Thu, Feb 11, 2010 at 3:46 PM, Sonam Chauhan <so...@ce.com.au>wrote:
>
> > /root/code/text() works on 2.3.4
>
> Thanks Deepak - I've verified this for 2.3.1 as well.
>
> I was using /root/code, instead of /root/code/text()
>
> I thought /root/code is valid XPath too?
>
>
> Sonam
>
> PS: The CSV data set config you mentioned in your other email was in 2.3.4
> and seemed to apply for inter-thread sharing only.
>
> -----Original Message-----
> From: Deepak Shetty [mailto:shettyd@gmail.com]
> Sent: Friday, 12 February 2010 10:36 AM
> To: JMeter Users List
> Subject: Re: __XPath problems
>
> /root/code/text() works on 2.3.4
>
> On Thu, Feb 11, 2010 at 3:33 PM, Sonam Chauhan <sonam.chauhan@ce.com.au
> >wrote:
>
> > > However you could just use __StringFromFile() instead.
> > > Or CSV Dataset - just ensure it is in the loop.
> >
> > Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset
> within
> > the loop - it works.
> >
> > Previously, I had tried using both __StringFromFile() and CSV Dataset
> > earlier, but at the top of the test plan instead of within the loop as
> you
> > suggested. That gave me the same code for each loop iteration.
> >
> > > Also, 2.3.1 is really old; there have been lots of bug fixes since
> then.
> >
> > I also tried the latest 2.3.4 release and the same __XPath() problem
> exists
> > there too.
> >
> > Regards,
> > Sonam
> >
> >
> > -----Original Message-----
> > From: sebb [mailto:sebbaz@gmail.com]
> > Sent: Friday, 12 February 2010 10:09 AM
> > To: JMeter Users List
> > Subject: Re: __XPath problems
> >
> > On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > > Hello:
> > >
> > > I've run into some problems with the __XPath function. I use it as
> the
> > 'Value' of a HTTP sampler parameter:
> > > -----------------------------------------------------
> > > ${__XPath(prodcodes.xml, /root/code)}
> > > -----------------------------------------------------
> > >
> > > This obtains a product code from the prodcodes.xml file, whose content
> > looks like this:
> > > -----------------------------------------------------
> > > <?xml version="1.0"?>
> > > <root>
> > > <code>00000123</code>
> > > <code>00001234</code>
> > > <code>00012345</code>
> > > ...
> > > </root>
> > > -----------------------------------------------------
> > >
> > > However, this __XPath function call always evaluates to value "null".
> > >
> > > The jmeter.log simply notes the prodcodes.xml file being used, and
> then
> > 'Stop Thread' signal when the HTTP sampler fails due to "null" not being
> a
> > product code:
> > > -----------------------------------------------------
> > > 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration
> > Tests Thread Group 1-1: Opening prodcodes.xml
> > > 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread
> > detected by thread Integration Tests Thread Group 1-1
> > > -----------------------------------------------------
> > >
> > >
> > > Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I
> > didn't see any bugzilla entries for __XPath
> >
> > No idea what the problem is, sorry.
> >
> > However you could just use __StringFromFile() instead.
> >
> > Or CSV Dataset - just ensure it is in the loop.
> >
> > BTW, it's easy to test functions etc using Java Request - just put the
> > function call in the "Label" field and it will show up in the
> > Listeners.
> >
> > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
> >
> >
> > > Regards,
> > > Sonam Chauhan
> > >
> > > PS: I use __XPath() because the HTTP sampler runs within a loop and it
> > needs to use a new product code in every iteration of the loop. CSV Data
> Set
> > Config et al allocate one config item per thread.
> > >
> > >
> > >
> > > The information contained in this email and any attached files are
> > strictly
> > > private and confidential. This email should be read by the intended
> > addressee
> > > only. If the recipient of this message is not the intended addressee,
> > please
> > > call Corporate Express Australia Limited on +61 2 9335 0555 or
> Corporate
> > Express
> > > New Zealand Limited on +64 9 271 7600 and promptly delete this email
> and
> > any
> > > attachments. The intended recipient of this email may only use,
> > reproduce,
> > > disclose or distribute the information contained in this email and any
> > attached
> > > files with Corporate Express' permission. If you are not the intended
> > addressee,
> > > you are strictly prohibited from using, reproducing, disclosing or
> > distributing
> > > the information contained in this email and any attached files.
> > Corporate
> > > Express advises that this email and any attached files should be
> scanned
> > to
> > > detect viruses. Corporate Express accepts no liability for loss or
> > damage
> > > (whether caused by negligence or not) resulting from the use of any
> > attached
> > > files.
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
RE: __XPath problems
Posted by Sonam Chauhan <so...@ce.com.au>.
> /root/code/text() works on 2.3.4
Thanks Deepak - I've verified this for 2.3.1 as well.
I was using /root/code, instead of /root/code/text()
I thought /root/code is valid XPath too?
Sonam
PS: The CSV data set config you mentioned in your other email was in 2.3.4 and seemed to apply for inter-thread sharing only.
-----Original Message-----
From: Deepak Shetty [mailto:shettyd@gmail.com]
Sent: Friday, 12 February 2010 10:36 AM
To: JMeter Users List
Subject: Re: __XPath problems
/root/code/text() works on 2.3.4
On Thu, Feb 11, 2010 at 3:33 PM, Sonam Chauhan <so...@ce.com.au>wrote:
> > However you could just use __StringFromFile() instead.
> > Or CSV Dataset - just ensure it is in the loop.
>
> Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset within
> the loop - it works.
>
> Previously, I had tried using both __StringFromFile() and CSV Dataset
> earlier, but at the top of the test plan instead of within the loop as you
> suggested. That gave me the same code for each loop iteration.
>
> > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
> I also tried the latest 2.3.4 release and the same __XPath() problem exists
> there too.
>
> Regards,
> Sonam
>
>
> -----Original Message-----
> From: sebb [mailto:sebbaz@gmail.com]
> Sent: Friday, 12 February 2010 10:09 AM
> To: JMeter Users List
> Subject: Re: __XPath problems
>
> On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > Hello:
> >
> > I've run into some problems with the __XPath function. I use it as the
> 'Value' of a HTTP sampler parameter:
> > -----------------------------------------------------
> > ${__XPath(prodcodes.xml, /root/code)}
> > -----------------------------------------------------
> >
> > This obtains a product code from the prodcodes.xml file, whose content
> looks like this:
> > -----------------------------------------------------
> > <?xml version="1.0"?>
> > <root>
> > <code>00000123</code>
> > <code>00001234</code>
> > <code>00012345</code>
> > ...
> > </root>
> > -----------------------------------------------------
> >
> > However, this __XPath function call always evaluates to value "null".
> >
> > The jmeter.log simply notes the prodcodes.xml file being used, and then
> 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a
> product code:
> > -----------------------------------------------------
> > 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration
> Tests Thread Group 1-1: Opening prodcodes.xml
> > 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread
> detected by thread Integration Tests Thread Group 1-1
> > -----------------------------------------------------
> >
> >
> > Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I
> didn't see any bugzilla entries for __XPath
>
> No idea what the problem is, sorry.
>
> However you could just use __StringFromFile() instead.
>
> Or CSV Dataset - just ensure it is in the loop.
>
> BTW, it's easy to test functions etc using Java Request - just put the
> function call in the "Label" field and it will show up in the
> Listeners.
>
> Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
>
> > Regards,
> > Sonam Chauhan
> >
> > PS: I use __XPath() because the HTTP sampler runs within a loop and it
> needs to use a new product code in every iteration of the loop. CSV Data Set
> Config et al allocate one config item per thread.
> >
> >
> >
> > The information contained in this email and any attached files are
> strictly
> > private and confidential. This email should be read by the intended
> addressee
> > only. If the recipient of this message is not the intended addressee,
> please
> > call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate
> Express
> > New Zealand Limited on +64 9 271 7600 and promptly delete this email and
> any
> > attachments. The intended recipient of this email may only use,
> reproduce,
> > disclose or distribute the information contained in this email and any
> attached
> > files with Corporate Express' permission. If you are not the intended
> addressee,
> > you are strictly prohibited from using, reproducing, disclosing or
> distributing
> > the information contained in this email and any attached files.
> Corporate
> > Express advises that this email and any attached files should be scanned
> to
> > detect viruses. Corporate Express accepts no liability for loss or
> damage
> > (whether caused by negligence or not) resulting from the use of any
> attached
> > files.
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: __XPath problems
Posted by Deepak Shetty <sh...@gmail.com>.
/root/code/text() works on 2.3.4
On Thu, Feb 11, 2010 at 3:33 PM, Sonam Chauhan <so...@ce.com.au>wrote:
> > However you could just use __StringFromFile() instead.
> > Or CSV Dataset - just ensure it is in the loop.
>
> Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset within
> the loop - it works.
>
> Previously, I had tried using both __StringFromFile() and CSV Dataset
> earlier, but at the top of the test plan instead of within the loop as you
> suggested. That gave me the same code for each loop iteration.
>
> > Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
> I also tried the latest 2.3.4 release and the same __XPath() problem exists
> there too.
>
> Regards,
> Sonam
>
>
> -----Original Message-----
> From: sebb [mailto:sebbaz@gmail.com]
> Sent: Friday, 12 February 2010 10:09 AM
> To: JMeter Users List
> Subject: Re: __XPath problems
>
> On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> > Hello:
> >
> > I've run into some problems with the __XPath function. I use it as the
> 'Value' of a HTTP sampler parameter:
> > -----------------------------------------------------
> > ${__XPath(prodcodes.xml, /root/code)}
> > -----------------------------------------------------
> >
> > This obtains a product code from the prodcodes.xml file, whose content
> looks like this:
> > -----------------------------------------------------
> > <?xml version="1.0"?>
> > <root>
> > <code>00000123</code>
> > <code>00001234</code>
> > <code>00012345</code>
> > ...
> > </root>
> > -----------------------------------------------------
> >
> > However, this __XPath function call always evaluates to value "null".
> >
> > The jmeter.log simply notes the prodcodes.xml file being used, and then
> 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a
> product code:
> > -----------------------------------------------------
> > 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration
> Tests Thread Group 1-1: Opening prodcodes.xml
> > 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread
> detected by thread Integration Tests Thread Group 1-1
> > -----------------------------------------------------
> >
> >
> > Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I
> didn't see any bugzilla entries for __XPath
>
> No idea what the problem is, sorry.
>
> However you could just use __StringFromFile() instead.
>
> Or CSV Dataset - just ensure it is in the loop.
>
> BTW, it's easy to test functions etc using Java Request - just put the
> function call in the "Label" field and it will show up in the
> Listeners.
>
> Also, 2.3.1 is really old; there have been lots of bug fixes since then.
>
>
> > Regards,
> > Sonam Chauhan
> >
> > PS: I use __XPath() because the HTTP sampler runs within a loop and it
> needs to use a new product code in every iteration of the loop. CSV Data Set
> Config et al allocate one config item per thread.
> >
> >
> >
> > The information contained in this email and any attached files are
> strictly
> > private and confidential. This email should be read by the intended
> addressee
> > only. If the recipient of this message is not the intended addressee,
> please
> > call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate
> Express
> > New Zealand Limited on +64 9 271 7600 and promptly delete this email and
> any
> > attachments. The intended recipient of this email may only use,
> reproduce,
> > disclose or distribute the information contained in this email and any
> attached
> > files with Corporate Express' permission. If you are not the intended
> addressee,
> > you are strictly prohibited from using, reproducing, disclosing or
> distributing
> > the information contained in this email and any attached files.
> Corporate
> > Express advises that this email and any attached files should be scanned
> to
> > detect viruses. Corporate Express accepts no liability for loss or
> damage
> > (whether caused by negligence or not) resulting from the use of any
> attached
> > files.
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
RE: __XPath problems
Posted by Sonam Chauhan <so...@ce.com.au>.
> However you could just use __StringFromFile() instead.
> Or CSV Dataset - just ensure it is in the loop.
Aha - Thanks Sebb. I just tried your suggestion and used CSV Dataset within the loop - it works.
Previously, I had tried using both __StringFromFile() and CSV Dataset earlier, but at the top of the test plan instead of within the loop as you suggested. That gave me the same code for each loop iteration.
> Also, 2.3.1 is really old; there have been lots of bug fixes since then.
I also tried the latest 2.3.4 release and the same __XPath() problem exists there too.
Regards,
Sonam
-----Original Message-----
From: sebb [mailto:sebbaz@gmail.com]
Sent: Friday, 12 February 2010 10:09 AM
To: JMeter Users List
Subject: Re: __XPath problems
On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> Hello:
>
> I've run into some problems with the __XPath function. I use it as the 'Value' of a HTTP sampler parameter:
> -----------------------------------------------------
> ${__XPath(prodcodes.xml, /root/code)}
> -----------------------------------------------------
>
> This obtains a product code from the prodcodes.xml file, whose content looks like this:
> -----------------------------------------------------
> <?xml version="1.0"?>
> <root>
> <code>00000123</code>
> <code>00001234</code>
> <code>00012345</code>
> ...
> </root>
> -----------------------------------------------------
>
> However, this __XPath function call always evaluates to value "null".
>
> The jmeter.log simply notes the prodcodes.xml file being used, and then 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a product code:
> -----------------------------------------------------
> 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration Tests Thread Group 1-1: Opening prodcodes.xml
> 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread detected by thread Integration Tests Thread Group 1-1
> -----------------------------------------------------
>
>
> Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I didn't see any bugzilla entries for __XPath
No idea what the problem is, sorry.
However you could just use __StringFromFile() instead.
Or CSV Dataset - just ensure it is in the loop.
BTW, it's easy to test functions etc using Java Request - just put the
function call in the "Label" field and it will show up in the
Listeners.
Also, 2.3.1 is really old; there have been lots of bug fixes since then.
> Regards,
> Sonam Chauhan
>
> PS: I use __XPath() because the HTTP sampler runs within a loop and it needs to use a new product code in every iteration of the loop. CSV Data Set Config et al allocate one config item per thread.
>
>
>
> The information contained in this email and any attached files are strictly
> private and confidential. This email should be read by the intended addressee
> only. If the recipient of this message is not the intended addressee, please
> call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate Express
> New Zealand Limited on +64 9 271 7600 and promptly delete this email and any
> attachments. The intended recipient of this email may only use, reproduce,
> disclose or distribute the information contained in this email and any attached
> files with Corporate Express' permission. If you are not the intended addressee,
> you are strictly prohibited from using, reproducing, disclosing or distributing
> the information contained in this email and any attached files. Corporate
> Express advises that this email and any attached files should be scanned to
> detect viruses. Corporate Express accepts no liability for loss or damage
> (whether caused by negligence or not) resulting from the use of any attached
> files.
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: __XPath problems
Posted by sebb <se...@gmail.com>.
On 11/02/2010, Sonam Chauhan <so...@ce.com.au> wrote:
> Hello:
>
> I've run into some problems with the __XPath function. I use it as the 'Value' of a HTTP sampler parameter:
> -----------------------------------------------------
> ${__XPath(prodcodes.xml, /root/code)}
> -----------------------------------------------------
>
> This obtains a product code from the prodcodes.xml file, whose content looks like this:
> -----------------------------------------------------
> <?xml version="1.0"?>
> <root>
> <code>00000123</code>
> <code>00001234</code>
> <code>00012345</code>
> ...
> </root>
> -----------------------------------------------------
>
> However, this __XPath function call always evaluates to value "null".
>
> The jmeter.log simply notes the prodcodes.xml file being used, and then 'Stop Thread' signal when the HTTP sampler fails due to "null" not being a product code:
> -----------------------------------------------------
> 2010/02/12 08:42:03 INFO - jmeter.functions.XPathWrapper: Integration Tests Thread Group 1-1: Opening prodcodes.xml
> 2010/02/12 08:42:03 INFO - jmeter.threads.JMeterThread: Stop Thread detected by thread Integration Tests Thread Group 1-1
> -----------------------------------------------------
>
>
> Any thoughts on what could be wrong? Our setup uses JMeter 2.3.1 - I didn't see any bugzilla entries for __XPath
No idea what the problem is, sorry.
However you could just use __StringFromFile() instead.
Or CSV Dataset - just ensure it is in the loop.
BTW, it's easy to test functions etc using Java Request - just put the
function call in the "Label" field and it will show up in the
Listeners.
Also, 2.3.1 is really old; there have been lots of bug fixes since then.
> Regards,
> Sonam Chauhan
>
> PS: I use __XPath() because the HTTP sampler runs within a loop and it needs to use a new product code in every iteration of the loop. CSV Data Set Config et al allocate one config item per thread.
>
>
>
> The information contained in this email and any attached files are strictly
> private and confidential. This email should be read by the intended addressee
> only. If the recipient of this message is not the intended addressee, please
> call Corporate Express Australia Limited on +61 2 9335 0555 or Corporate Express
> New Zealand Limited on +64 9 271 7600 and promptly delete this email and any
> attachments. The intended recipient of this email may only use, reproduce,
> disclose or distribute the information contained in this email and any attached
> files with Corporate Express' permission. If you are not the intended addressee,
> you are strictly prohibited from using, reproducing, disclosing or distributing
> the information contained in this email and any attached files. Corporate
> Express advises that this email and any attached files should be scanned to
> detect viruses. Corporate Express accepts no liability for loss or damage
> (whether caused by negligence or not) resulting from the use of any attached
> files.
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org