You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@vcl.apache.org by Karuna P Joshi <kj...@umbc.edu> on 2015/02/04 16:47:26 UTC
Re: need testers - trunk VM
Hi Josh,
We were able to download and install the VM. But we are stuck at the point
in red below ( how to detect the IP address.) Without that we are unable to
invoke from browser.
Could you help us on how to do that.
thanks,
Karuna
After downloading the
> VM from
>
>
https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=sharin
> g
>
> you need to create a VM on your host with a single NIC that has a MAC
> address of 0e:00:00:38:fe:db and is bridged to a network from which it can
> get a public IP address via DHCP. Once you boot the VM, you can log in at
> the console to find out what IP address it received. Log in as root. The
> password is 'testVCL@trunk14'. Open a web browser and enter the IP. You
> should be redirected to the VCL page for selecting an authentication
> method. Log in with local account 'admin'. The password is the same as
for
> the root user listed above.
On Mon, Feb 2, 2015 at 11:04 AM, Karuna P Joshi <kj...@umbc.edu> wrote:
>
> ---------- Forwarded message ----------
> From: Josh Thompson <jo...@ncsu.edu>
> Date: Thu, Jan 29, 2015 at 8:04 PM
> Subject: Re: need testers - trunk VM
> To: dev@vcl.apache.org
> Cc: user@vcl.apache.org
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I've also uploaded a version of the file that is in compressed qcow2 format
> that should make downloading a little easier. It is ~ 3.6 GB.
>
>
> https://drive.google.com/file/d/0B8eeP8Y-9a1VbVZ1S19NX0VKdFk/view?usp=sharing
>
> Josh
>
> On Tuesday, December 23, 2014 4:02:29 PM Josh Thompson wrote:
> > We need testers!
> >
> > We're really close to having 2.4 ready for release.
> >
> > I've created a VM with VCL trunk installed in to for people to use for
> > testing the latest code. It is based on KVM and CentOS 7 and requires a
> > host that supports nesting hypervisors. It is using the new NAT code.
> So,
> > you only need a host with a single network adapter. After downloading
> the
> > VM from
> >
> >
> https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=sharin
> > g
> >
> > you need to create a VM on your host with a single NIC that has a MAC
> > address of 0e:00:00:38:fe:db and is bridged to a network from which it
> can
> > get a public IP address via DHCP. Once you boot the VM, you can log in
> at
> > the console to find out what IP address it received. Log in as root.
> The
> > password is 'testVCL@trunk14'. Open a web browser and enter the IP.
> You
> > should be redirected to the VCL page for selecting an authentication
> > method. Log in with local account 'admin'. The password is the same as
> for
> > the root user listed above. There is one CentOS 7 image available for
> > testing and two VMs. There is a third VM that is running all of the VCL
> > code. You can get to it from the parent VM by running 'ssh mn'.
> >
> > There is a script named update.sh in /root on the management node VM that
> > will run 'svn update' for all the VCL parts. It does download updates
> for
> > the database .sql files, but it does not import the update-vcl.sql file
> to
> > actually change the schema. If you see that update-vcl.sql gets updated
> > when running the update.sh script, you may want to manually update the
> > schema. Make sure to do a backup first!
> >
> > Please test and report any problems you find or if you find that
> everything
> > works without problems!
> >
> > Merry Christmas,
> > Josh
> > --
> > -------------------------------
> > Josh Thompson
> > VCL Developer
> > North Carolina State University
>
>
Re: need testers - trunk VM
Posted by Josh Thompson <jo...@ncsu.edu>.
Karuna,
The VM is using hypervisor nesting to run all of VCL. The VM you initially
log in to is the hypervisor. There is a VM running inside it that has all of
the VCL code. Use
ssh mn
to get to it. That VM is configured to be able to deploy 2 other VMs on the
same hypervisor on which it is running for use when making reservations. So,
you have something like this (best viewed with a fixed width font):
+---------------------------+---------+---------+
| VCL management node VM | VM1 | VM2 |
----------------------------+---------+---------+
| CentOS 7 hypervisor VM |
+-----------------------------------------------+
Additionally, the new NAT code is being used so that all connections can be
made directly to the IP of the CentOS 7 hypervisor VM.
Josh
On Tuesday, February 10, 2015 1:09:37 PM Karuna P Joshi wrote:
> Hi Josh,
>
> I was able to successfully install this on another machine and test the VCL
> install. However, I have now got stuck with the VCL broker patch testing.
> The VM launched doesn't appear to have the same directory structure . I do
> not see webcode under /var/www/html/vcl . Also where is the backend
> configuration file vcld.conf ? Without this information it's difficult to
> apply and test the patch.
>
> regards,
> Karuna
>
> On Tue, Feb 10, 2015 at 3:12 AM, Josh Thompson <jo...@ncsu.edu>
>
> wrote:
> > Karuna,
> >
> > Were you able to get console access to the VM to determine the IP address?
> >
> > It would be really great if we could get a release candidate out this
> > week.
> > Do you think you could have your testing done by Wednesday?
> >
> > Thanks,
> > Josh
> >
> > On Wednesday, February 04, 2015 11:11:17 AM Josh Thompson wrote:
> > > Karuna,
> > >
> > > After you boot the VM, you need to figure out how to access the console.
> > > KVM provides a few ways of doing this. I typically use Virtual Machine
> > > Manager when managing KVM hosts. It provides an easy way to see the
> > > console. Once you have figured out how to access the console, you need
> >
> > to
> >
> > > log in as root. The root password is 'testVCL@trunk14' (without the
> > > quotes). After logging in, just run 'ifconfig' to see the IP address.
> > >
> > > Josh
> > >
> > > On Wednesday, February 04, 2015 9:17:26 PM you wrote:
> > > > Hi Josh,
> > > >
> > > > We were able to download and install the VM. But we are stuck at the
> >
> > point
> >
> > > > in red below ( how to detect the IP address.) Without that we are
> >
> > unable
> >
> > > > to
> > > > invoke from browser.
> > > >
> > > > Could you help us on how to do that.
> > > >
> > > > thanks,
> > > > Karuna
> > > >
> > > > After downloading the
> > > >
> > > > > VM from
> >
> > https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=shar
> >
> > > > in>
> > > >
> > > > > g
> > > > >
> > > > > you need to create a VM on your host with a single NIC that has a
> > > > > MAC
> > > > > address of 0e:00:00:38:fe:db and is bridged to a network from which
> >
> > it
> >
> > > > > can
> > > > > get a public IP address via DHCP. Once you boot the VM, you can log
> >
> > in
> >
> > > > > at
> > > > > the console to find out what IP address it received. Log in as
> > > > > root.
> > > > > The
> > > > > password is 'testVCL@trunk14'. Open a web browser and enter the IP.
> > > > > You
> > > > > should be redirected to the VCL page for selecting an authentication
> > > > > method. Log in with local account 'admin'. The password is the same
> >
> > as
> >
> > > > for
> > > >
> > > > > the root user listed above.
> > > >
> > > > On Mon, Feb 2, 2015 at 11:04 AM, Karuna P Joshi <kj...@umbc.edu>
> >
> > wrote:
> > > > > ---------- Forwarded message ----------
> > > > > From: Josh Thompson <jo...@ncsu.edu>
> > > > > Date: Thu, Jan 29, 2015 at 8:04 PM
> > > > > Subject: Re: need testers - trunk VM
> > > > > To: dev@vcl.apache.org
> > > > > Cc: user@vcl.apache.org
> > > > >
> > > > >
> > > > > -----BEGIN PGP SIGNED MESSAGE-----
> > > > > Hash: SHA1
> > > > >
> > > > > I've also uploaded a version of the file that is in compressed qcow2
> > > > > format
> > > > > that should make downloading a little easier. It is ~ 3.6 GB.
> >
> > https://drive.google.com/file/d/0B8eeP8Y-9a1VbVZ1S19NX0VKdFk/view?usp=sh
> >
> > > > > ar
> > > > > ing
> > > > >
> > > > > Josh
> > > > >
> > > > > On Tuesday, December 23, 2014 4:02:29 PM Josh Thompson wrote:
> > > > > > We need testers!
> > > > > >
> > > > > > We're really close to having 2.4 ready for release.
> > > > > >
> > > > > > I've created a VM with VCL trunk installed in to for people to use
> >
> > for
> >
> > > > > > testing the latest code. It is based on KVM and CentOS 7 and
> >
> > requires
> >
> > > > > > a
> > > > > > host that supports nesting hypervisors. It is using the new NAT
> >
> > code.
> >
> > > > > So,
> > > > >
> > > > > > you only need a host with a single network adapter. After
> >
> > downloading
> >
> > > > > the
> > > > >
> > > > > > VM from
> >
> > https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=sh
> >
> > > > > ar
> > > > > in>
> > > > >
> > > > > > g
> > > > > >
> > > > > > you need to create a VM on your host with a single NIC that has a
> >
> > MAC
> >
> > > > > > address of 0e:00:00:38:fe:db and is bridged to a network from
> >
> > which it
> >
> > > > > can
> > > > >
> > > > > > get a public IP address via DHCP. Once you boot the VM, you can
> >
> > log
> >
> > > > > > in
> > > > >
> > > > > at
> > > > >
> > > > > > the console to find out what IP address it received. Log in as
> >
> > root.
> >
> > > > > The
> > > > >
> > > > > > password is 'testVCL@trunk14'. Open a web browser and enter the
> >
> > IP.
> >
> > > > > You
> > > > >
> > > > > > should be redirected to the VCL page for selecting an
> >
> > authentication
> >
> > > > > > method. Log in with local account 'admin'. The password is the
> >
> > same
> >
> > > > > > as
> > > > >
> > > > > for
> > > > >
> > > > > > the root user listed above. There is one CentOS 7 image available
> >
> > for
> >
> > > > > > testing and two VMs. There is a third VM that is running all of
> >
> > the
> >
> > > > > > VCL
> > > > > > code. You can get to it from the parent VM by running 'ssh mn'.
> > > > > >
> > > > > > There is a script named update.sh in /root on the management node
> >
> > VM
> >
> > > > > > that
> > > > > > will run 'svn update' for all the VCL parts. It does download
> >
> > updates
> >
> > > > > for
> > > > >
> > > > > > the database .sql files, but it does not import the update-vcl.sql
> > > > > > file
> > > > >
> > > > > to
> > > > >
> > > > > > actually change the schema. If you see that update-vcl.sql gets
> > > > > > updated
> > > > > > when running the update.sh script, you may want to manually update
> >
> > the
> >
> > > > > > schema. Make sure to do a backup first!
> > > > > >
> > > > > > Please test and report any problems you find or if you find that
> > > > >
> > > > > everything
> > > > >
> > > > > > works without problems!
> > > > > >
> > > > > > Merry Christmas,
> > > > > > Josh
> > > > > > --
> > > > > > -------------------------------
> > > > > > Josh Thompson
> > > > > > VCL Developer
> > > > > > North Carolina State University
> >
> > --
> > -------------------------------
> > Josh Thompson
> > Systems Programmer
> > Advanced Computing | VCL Developer
> > North Carolina State University
> >
> > Josh_Thompson@ncsu.edu
> > 919-515-5323
> >
> > my GPG/PGP key can be found at pgp.mit.edu
> >
> > All electronic mail messages in connection with State business which
> > are sent to or received by this account are subject to the NC Public
> > Records Law and may be disclosed to third parties.
--
-------------------------------
Josh Thompson
Systems Programmer
Advanced Computing | VCL Developer
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at pgp.mit.edu
All electronic mail messages in connection with State business which
are sent to or received by this account are subject to the NC Public
Records Law and may be disclosed to third parties.
Re: need testers - trunk VM
Posted by Karuna P Joshi <kj...@umbc.edu>.
Hi Josh,
I was able to successfully install this on another machine and test the VCL
install. However, I have now got stuck with the VCL broker patch testing.
The VM launched doesn't appear to have the same directory structure . I do
not see webcode under /var/www/html/vcl . Also where is the backend
configuration file vcld.conf ? Without this information it's difficult to
apply and test the patch.
regards,
Karuna
On Tue, Feb 10, 2015 at 3:12 AM, Josh Thompson <jo...@ncsu.edu>
wrote:
> Karuna,
>
> Were you able to get console access to the VM to determine the IP address?
>
> It would be really great if we could get a release candidate out this week.
> Do you think you could have your testing done by Wednesday?
>
> Thanks,
> Josh
>
> On Wednesday, February 04, 2015 11:11:17 AM Josh Thompson wrote:
> > Karuna,
> >
> > After you boot the VM, you need to figure out how to access the console.
> > KVM provides a few ways of doing this. I typically use Virtual Machine
> > Manager when managing KVM hosts. It provides an easy way to see the
> > console. Once you have figured out how to access the console, you need
> to
> > log in as root. The root password is 'testVCL@trunk14' (without the
> > quotes). After logging in, just run 'ifconfig' to see the IP address.
> >
> > Josh
> >
> > On Wednesday, February 04, 2015 9:17:26 PM you wrote:
> > > Hi Josh,
> > >
> > > We were able to download and install the VM. But we are stuck at the
> point
> > > in red below ( how to detect the IP address.) Without that we are
> unable
> > > to
> > > invoke from browser.
> > >
> > > Could you help us on how to do that.
> > >
> > > thanks,
> > > Karuna
> > >
> > > After downloading the
> > >
> > > > VM from
> > >
> > >
> https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=shar
> > > in>
> > > > g
> > > >
> > > > you need to create a VM on your host with a single NIC that has a MAC
> > > > address of 0e:00:00:38:fe:db and is bridged to a network from which
> it
> > > > can
> > > > get a public IP address via DHCP. Once you boot the VM, you can log
> in
> > > > at
> > > > the console to find out what IP address it received. Log in as root.
> > > > The
> > > > password is 'testVCL@trunk14'. Open a web browser and enter the IP.
> > > > You
> > > > should be redirected to the VCL page for selecting an authentication
> > > > method. Log in with local account 'admin'. The password is the same
> as
> > >
> > > for
> > >
> > > > the root user listed above.
> > >
> > > On Mon, Feb 2, 2015 at 11:04 AM, Karuna P Joshi <kj...@umbc.edu>
> wrote:
> > > > ---------- Forwarded message ----------
> > > > From: Josh Thompson <jo...@ncsu.edu>
> > > > Date: Thu, Jan 29, 2015 at 8:04 PM
> > > > Subject: Re: need testers - trunk VM
> > > > To: dev@vcl.apache.org
> > > > Cc: user@vcl.apache.org
> > > >
> > > >
> > > > -----BEGIN PGP SIGNED MESSAGE-----
> > > > Hash: SHA1
> > > >
> > > > I've also uploaded a version of the file that is in compressed qcow2
> > > > format
> > > > that should make downloading a little easier. It is ~ 3.6 GB.
> > > >
> > > >
> > > >
> https://drive.google.com/file/d/0B8eeP8Y-9a1VbVZ1S19NX0VKdFk/view?usp=sh
> > > > ar
> > > > ing
> > > >
> > > > Josh
> > > >
> > > > On Tuesday, December 23, 2014 4:02:29 PM Josh Thompson wrote:
> > > > > We need testers!
> > > > >
> > > > > We're really close to having 2.4 ready for release.
> > > > >
> > > > > I've created a VM with VCL trunk installed in to for people to use
> for
> > > > > testing the latest code. It is based on KVM and CentOS 7 and
> requires
> > > > > a
> > > > > host that supports nesting hypervisors. It is using the new NAT
> code.
> > > >
> > > > So,
> > > >
> > > > > you only need a host with a single network adapter. After
> downloading
> > > >
> > > > the
> > > >
> > > > > VM from
> > > >
> > > >
> https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=sh
> > > > ar
> > > > in>
> > > >
> > > > > g
> > > > >
> > > > > you need to create a VM on your host with a single NIC that has a
> MAC
> > > > > address of 0e:00:00:38:fe:db and is bridged to a network from
> which it
> > > >
> > > > can
> > > >
> > > > > get a public IP address via DHCP. Once you boot the VM, you can
> log
> > > > > in
> > > >
> > > > at
> > > >
> > > > > the console to find out what IP address it received. Log in as
> root.
> > > >
> > > > The
> > > >
> > > > > password is 'testVCL@trunk14'. Open a web browser and enter the
> IP.
> > > >
> > > > You
> > > >
> > > > > should be redirected to the VCL page for selecting an
> authentication
> > > > > method. Log in with local account 'admin'. The password is the
> same
> > > > > as
> > > >
> > > > for
> > > >
> > > > > the root user listed above. There is one CentOS 7 image available
> for
> > > > > testing and two VMs. There is a third VM that is running all of
> the
> > > > > VCL
> > > > > code. You can get to it from the parent VM by running 'ssh mn'.
> > > > >
> > > > > There is a script named update.sh in /root on the management node
> VM
> > > > > that
> > > > > will run 'svn update' for all the VCL parts. It does download
> updates
> > > >
> > > > for
> > > >
> > > > > the database .sql files, but it does not import the update-vcl.sql
> > > > > file
> > > >
> > > > to
> > > >
> > > > > actually change the schema. If you see that update-vcl.sql gets
> > > > > updated
> > > > > when running the update.sh script, you may want to manually update
> the
> > > > > schema. Make sure to do a backup first!
> > > > >
> > > > > Please test and report any problems you find or if you find that
> > > >
> > > > everything
> > > >
> > > > > works without problems!
> > > > >
> > > > > Merry Christmas,
> > > > > Josh
> > > > > --
> > > > > -------------------------------
> > > > > Josh Thompson
> > > > > VCL Developer
> > > > > North Carolina State University
> --
> -------------------------------
> Josh Thompson
> Systems Programmer
> Advanced Computing | VCL Developer
> North Carolina State University
>
> Josh_Thompson@ncsu.edu
> 919-515-5323
>
> my GPG/PGP key can be found at pgp.mit.edu
>
> All electronic mail messages in connection with State business which
> are sent to or received by this account are subject to the NC Public
> Records Law and may be disclosed to third parties.
>
--
regards,
Karuna
__________________________________
*Karuna Pande Joshi *, PhD
Research Assistant Professor
CSEE Dept, UMBC
kjoshi1@umbc.edu, Karuna.Joshi@umbc.edu
Re: need testers - trunk VM
Posted by Josh Thompson <jo...@ncsu.edu>.
Karuna,
Were you able to get console access to the VM to determine the IP address?
It would be really great if we could get a release candidate out this week.
Do you think you could have your testing done by Wednesday?
Thanks,
Josh
On Wednesday, February 04, 2015 11:11:17 AM Josh Thompson wrote:
> Karuna,
>
> After you boot the VM, you need to figure out how to access the console.
> KVM provides a few ways of doing this. I typically use Virtual Machine
> Manager when managing KVM hosts. It provides an easy way to see the
> console. Once you have figured out how to access the console, you need to
> log in as root. The root password is 'testVCL@trunk14' (without the
> quotes). After logging in, just run 'ifconfig' to see the IP address.
>
> Josh
>
> On Wednesday, February 04, 2015 9:17:26 PM you wrote:
> > Hi Josh,
> >
> > We were able to download and install the VM. But we are stuck at the point
> > in red below ( how to detect the IP address.) Without that we are unable
> > to
> > invoke from browser.
> >
> > Could you help us on how to do that.
> >
> > thanks,
> > Karuna
> >
> > After downloading the
> >
> > > VM from
> >
> > https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=shar
> > in>
> > > g
> > >
> > > you need to create a VM on your host with a single NIC that has a MAC
> > > address of 0e:00:00:38:fe:db and is bridged to a network from which it
> > > can
> > > get a public IP address via DHCP. Once you boot the VM, you can log in
> > > at
> > > the console to find out what IP address it received. Log in as root.
> > > The
> > > password is 'testVCL@trunk14'. Open a web browser and enter the IP.
> > > You
> > > should be redirected to the VCL page for selecting an authentication
> > > method. Log in with local account 'admin'. The password is the same as
> >
> > for
> >
> > > the root user listed above.
> >
> > On Mon, Feb 2, 2015 at 11:04 AM, Karuna P Joshi <kj...@umbc.edu> wrote:
> > > ---------- Forwarded message ----------
> > > From: Josh Thompson <jo...@ncsu.edu>
> > > Date: Thu, Jan 29, 2015 at 8:04 PM
> > > Subject: Re: need testers - trunk VM
> > > To: dev@vcl.apache.org
> > > Cc: user@vcl.apache.org
> > >
> > >
> > > -----BEGIN PGP SIGNED MESSAGE-----
> > > Hash: SHA1
> > >
> > > I've also uploaded a version of the file that is in compressed qcow2
> > > format
> > > that should make downloading a little easier. It is ~ 3.6 GB.
> > >
> > >
> > > https://drive.google.com/file/d/0B8eeP8Y-9a1VbVZ1S19NX0VKdFk/view?usp=sh
> > > ar
> > > ing
> > >
> > > Josh
> > >
> > > On Tuesday, December 23, 2014 4:02:29 PM Josh Thompson wrote:
> > > > We need testers!
> > > >
> > > > We're really close to having 2.4 ready for release.
> > > >
> > > > I've created a VM with VCL trunk installed in to for people to use for
> > > > testing the latest code. It is based on KVM and CentOS 7 and requires
> > > > a
> > > > host that supports nesting hypervisors. It is using the new NAT code.
> > >
> > > So,
> > >
> > > > you only need a host with a single network adapter. After downloading
> > >
> > > the
> > >
> > > > VM from
> > >
> > > https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=sh
> > > ar
> > > in>
> > >
> > > > g
> > > >
> > > > you need to create a VM on your host with a single NIC that has a MAC
> > > > address of 0e:00:00:38:fe:db and is bridged to a network from which it
> > >
> > > can
> > >
> > > > get a public IP address via DHCP. Once you boot the VM, you can log
> > > > in
> > >
> > > at
> > >
> > > > the console to find out what IP address it received. Log in as root.
> > >
> > > The
> > >
> > > > password is 'testVCL@trunk14'. Open a web browser and enter the IP.
> > >
> > > You
> > >
> > > > should be redirected to the VCL page for selecting an authentication
> > > > method. Log in with local account 'admin'. The password is the same
> > > > as
> > >
> > > for
> > >
> > > > the root user listed above. There is one CentOS 7 image available for
> > > > testing and two VMs. There is a third VM that is running all of the
> > > > VCL
> > > > code. You can get to it from the parent VM by running 'ssh mn'.
> > > >
> > > > There is a script named update.sh in /root on the management node VM
> > > > that
> > > > will run 'svn update' for all the VCL parts. It does download updates
> > >
> > > for
> > >
> > > > the database .sql files, but it does not import the update-vcl.sql
> > > > file
> > >
> > > to
> > >
> > > > actually change the schema. If you see that update-vcl.sql gets
> > > > updated
> > > > when running the update.sh script, you may want to manually update the
> > > > schema. Make sure to do a backup first!
> > > >
> > > > Please test and report any problems you find or if you find that
> > >
> > > everything
> > >
> > > > works without problems!
> > > >
> > > > Merry Christmas,
> > > > Josh
> > > > --
> > > > -------------------------------
> > > > Josh Thompson
> > > > VCL Developer
> > > > North Carolina State University
--
-------------------------------
Josh Thompson
Systems Programmer
Advanced Computing | VCL Developer
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at pgp.mit.edu
All electronic mail messages in connection with State business which
are sent to or received by this account are subject to the NC Public
Records Law and may be disclosed to third parties.
Re: need testers - trunk VM
Posted by Josh Thompson <jo...@ncsu.edu>.
Karuna,
After you boot the VM, you need to figure out how to access the console. KVM
provides a few ways of doing this. I typically use Virtual Machine Manager
when managing KVM hosts. It provides an easy way to see the console. Once
you have figured out how to access the console, you need to log in as root.
The root password is 'testVCL@trunk14' (without the quotes). After logging
in, just run 'ifconfig' to see the IP address.
Josh
On Wednesday, February 04, 2015 9:17:26 PM you wrote:
> Hi Josh,
>
> We were able to download and install the VM. But we are stuck at the point
> in red below ( how to detect the IP address.) Without that we are unable to
> invoke from browser.
> Could you help us on how to do that.
>
> thanks,
> Karuna
>
> After downloading the
>
> > VM from
>
> https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=sharin
> > g
> >
> > you need to create a VM on your host with a single NIC that has a MAC
> > address of 0e:00:00:38:fe:db and is bridged to a network from which it can
> > get a public IP address via DHCP. Once you boot the VM, you can log in at
> > the console to find out what IP address it received. Log in as root. The
> > password is 'testVCL@trunk14'. Open a web browser and enter the IP. You
> > should be redirected to the VCL page for selecting an authentication
> > method. Log in with local account 'admin'. The password is the same as
>
> for
>
> > the root user listed above.
>
> On Mon, Feb 2, 2015 at 11:04 AM, Karuna P Joshi <kj...@umbc.edu> wrote:
> > ---------- Forwarded message ----------
> > From: Josh Thompson <jo...@ncsu.edu>
> > Date: Thu, Jan 29, 2015 at 8:04 PM
> > Subject: Re: need testers - trunk VM
> > To: dev@vcl.apache.org
> > Cc: user@vcl.apache.org
> >
> >
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > I've also uploaded a version of the file that is in compressed qcow2
> > format
> > that should make downloading a little easier. It is ~ 3.6 GB.
> >
> >
> > https://drive.google.com/file/d/0B8eeP8Y-9a1VbVZ1S19NX0VKdFk/view?usp=shar
> > ing
> >
> > Josh
> >
> > On Tuesday, December 23, 2014 4:02:29 PM Josh Thompson wrote:
> > > We need testers!
> > >
> > > We're really close to having 2.4 ready for release.
> > >
> > > I've created a VM with VCL trunk installed in to for people to use for
> > > testing the latest code. It is based on KVM and CentOS 7 and requires a
> > > host that supports nesting hypervisors. It is using the new NAT code.
> >
> > So,
> >
> > > you only need a host with a single network adapter. After downloading
> >
> > the
> >
> > > VM from
> >
> > https://drive.google.com/file/d/0B8eeP8Y-9a1VZmJfbjlocm9NMHc/view?usp=shar
> > in>
> > > g
> > >
> > > you need to create a VM on your host with a single NIC that has a MAC
> > > address of 0e:00:00:38:fe:db and is bridged to a network from which it
> >
> > can
> >
> > > get a public IP address via DHCP. Once you boot the VM, you can log in
> >
> > at
> >
> > > the console to find out what IP address it received. Log in as root.
> >
> > The
> >
> > > password is 'testVCL@trunk14'. Open a web browser and enter the IP.
> >
> > You
> >
> > > should be redirected to the VCL page for selecting an authentication
> > > method. Log in with local account 'admin'. The password is the same as
> >
> > for
> >
> > > the root user listed above. There is one CentOS 7 image available for
> > > testing and two VMs. There is a third VM that is running all of the VCL
> > > code. You can get to it from the parent VM by running 'ssh mn'.
> > >
> > > There is a script named update.sh in /root on the management node VM
> > > that
> > > will run 'svn update' for all the VCL parts. It does download updates
> >
> > for
> >
> > > the database .sql files, but it does not import the update-vcl.sql file
> >
> > to
> >
> > > actually change the schema. If you see that update-vcl.sql gets updated
> > > when running the update.sh script, you may want to manually update the
> > > schema. Make sure to do a backup first!
> > >
> > > Please test and report any problems you find or if you find that
> >
> > everything
> >
> > > works without problems!
> > >
> > > Merry Christmas,
> > > Josh
> > > --
> > > -------------------------------
> > > Josh Thompson
> > > VCL Developer
> > > North Carolina State University
--
-------------------------------
Josh Thompson
Systems Programmer
Advanced Computing | VCL Developer
North Carolina State University
Josh_Thompson@ncsu.edu
919-515-5323
my GPG/PGP key can be found at pgp.mit.edu
All electronic mail messages in connection with State business which
are sent to or received by this account are subject to the NC Public
Records Law and may be disclosed to third parties.