[DISCUSS] NiFi Registry 0.5.0 release

[Bryan Bende <bb...@gmail.com>]

It looks like we are close to wrapping up the remaining items for an
0.5.0 release. There is one open PR that integrates the latest FDS
release into the UI which looks like it is close to getting in. Once
that wraps up I think we can get an RC out. I'm happy to perform RM
duties.

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Bryan Bende <bb...@gmail.com>]

A few final items have been merged, including the Knox work referenced
earlier, as well as the FDS upgrade, and a few improvements to support
the parameter work on NiFi side.

There is one last PR with some dependency upgrades that would be good
to get in, and it looks like its close, so we'll see if we can get
that in.

Hoping to possibly kick out an RC some time tomorrow.

On Sun, Aug 11, 2019 at 3:49 PM Mike Thomsen <mi...@gmail.com> wrote:
>
> No, we're running NiFi 1.8 and Registry 0.4
>
> On Sun, Aug 11, 2019 at 11:20 AM Bryan Bende <bb...@gmail.com> wrote:
>
> > There shouldn’t be... 0.5.0 shouldn’t be too much different than 0.4.0,
> > just a few improvements and a couple of fixes that NiFi needs from the
> > released registry artifacts.
> >
> > Are you running NiFi 1.8 with registry 0.4?
> >
> > On Sat, Aug 10, 2019 at 11:19 AM Mike Thomsen <mi...@gmail.com>
> > wrote:
> >
> > > Are there any incompatibilities expected between this release and NiFi
> > 1.8?
> > > We're not planning on upgrading until 1.10 at the earliest.
> > >
> > > Thanks,
> > >
> > > Mike
> > >
> > > On Sat, Aug 10, 2019 at 8:48 AM Denes Arvay <de...@apache.org> wrote:
> > >
> > > > There's an ongoing initiative to add Knox proxy support to NiFi
> > Registry
> > > > [1]. It might involve Knox changes too [2], so I don't know how
> > > complicated
> > > > it is, but it'd be good if that could go to the release as well.
> > > >
> > > > [1] https://issues.apache.org/jira/browse/NIFIREG-295
> > > > [2] https://issues.apache.org/jira/browse/KNOX-1952
> > > >
> > > > Regards,
> > > > Denes
> > > >
> > > > On Sat, Aug 10, 2019 at 2:25 PM Kevin Doran <kd...@apache.org> wrote:
> > > >
> > > > > Thanks for kicking off this discussion thread, Bryan. I agree we are
> > > > > reaching a good point to start preparing a release candidate. I see a
> > > > > few PRs up, I'll go through those and if any are close will get them
> > > > > merged prior to a RC.
> > > > >
> > > > > If anyone else wants to submit a PR in the next week or so I am also
> > > > > happy to review them.
> > > > >
> > > > > On Fri, Aug 9, 2019 at 12:25 PM Bryan Bende <bb...@gmail.com>
> > wrote:
> > > > > >
> > > > > > That would be a nice addition, although it doesn't look like anyone
> > > is
> > > > > > actively working on it.
> > > > > >
> > > > > > If someone is able to tackle it and get a PR up in the next week,
> > I'd
> > > > > > be happy to review it.
> > > > > >
> > > > > > On Fri, Aug 9, 2019 at 12:07 PM Mark Bean <ma...@gmail.com>
> > > > wrote:
> > > > > > >
> > > > > > > I'd like to see NIFIREG-177 included in the next release. It
> > seems
> > > > > like a
> > > > > > > fairly simple addition, but I have not had time to dig in; I'm
> > not
> > > > > familiar
> > > > > > > with modifying the UI. I hope someone knowledge of the UI could
> > > knock
> > > > > this
> > > > > > > out fairly quickly?
> > > > > > >
> > > > > > > [1] https://issues.apache.org/jira/browse/NIFIREG-177
> > > > > > >
> > > > > > >
> > > > > > > On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com>
> > > wrote:
> > > > > > >
> > > > > > > > It looks like we are close to wrapping up the remaining items
> > for
> > > > an
> > > > > > > > 0.5.0 release. There is one open PR that integrates the latest
> > > FDS
> > > > > > > > release into the UI which looks like it is close to getting in.
> > > > Once
> > > > > > > > that wraps up I think we can get an RC out. I'm happy to
> > perform
> > > RM
> > > > > > > > duties.
> > > > > > > >
> > > > >
> > > >
> > >
> > --
> > Sent from Gmail Mobile
> >

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Mike Thomsen <mi...@gmail.com>]

No, we're running NiFi 1.8 and Registry 0.4

On Sun, Aug 11, 2019 at 11:20 AM Bryan Bende <bb...@gmail.com> wrote:

> There shouldn’t be... 0.5.0 shouldn’t be too much different than 0.4.0,
> just a few improvements and a couple of fixes that NiFi needs from the
> released registry artifacts.
>
> Are you running NiFi 1.8 with registry 0.4?
>
> On Sat, Aug 10, 2019 at 11:19 AM Mike Thomsen <mi...@gmail.com>
> wrote:
>
> > Are there any incompatibilities expected between this release and NiFi
> 1.8?
> > We're not planning on upgrading until 1.10 at the earliest.
> >
> > Thanks,
> >
> > Mike
> >
> > On Sat, Aug 10, 2019 at 8:48 AM Denes Arvay <de...@apache.org> wrote:
> >
> > > There's an ongoing initiative to add Knox proxy support to NiFi
> Registry
> > > [1]. It might involve Knox changes too [2], so I don't know how
> > complicated
> > > it is, but it'd be good if that could go to the release as well.
> > >
> > > [1] https://issues.apache.org/jira/browse/NIFIREG-295
> > > [2] https://issues.apache.org/jira/browse/KNOX-1952
> > >
> > > Regards,
> > > Denes
> > >
> > > On Sat, Aug 10, 2019 at 2:25 PM Kevin Doran <kd...@apache.org> wrote:
> > >
> > > > Thanks for kicking off this discussion thread, Bryan. I agree we are
> > > > reaching a good point to start preparing a release candidate. I see a
> > > > few PRs up, I'll go through those and if any are close will get them
> > > > merged prior to a RC.
> > > >
> > > > If anyone else wants to submit a PR in the next week or so I am also
> > > > happy to review them.
> > > >
> > > > On Fri, Aug 9, 2019 at 12:25 PM Bryan Bende <bb...@gmail.com>
> wrote:
> > > > >
> > > > > That would be a nice addition, although it doesn't look like anyone
> > is
> > > > > actively working on it.
> > > > >
> > > > > If someone is able to tackle it and get a PR up in the next week,
> I'd
> > > > > be happy to review it.
> > > > >
> > > > > On Fri, Aug 9, 2019 at 12:07 PM Mark Bean <ma...@gmail.com>
> > > wrote:
> > > > > >
> > > > > > I'd like to see NIFIREG-177 included in the next release. It
> seems
> > > > like a
> > > > > > fairly simple addition, but I have not had time to dig in; I'm
> not
> > > > familiar
> > > > > > with modifying the UI. I hope someone knowledge of the UI could
> > knock
> > > > this
> > > > > > out fairly quickly?
> > > > > >
> > > > > > [1] https://issues.apache.org/jira/browse/NIFIREG-177
> > > > > >
> > > > > >
> > > > > > On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com>
> > wrote:
> > > > > >
> > > > > > > It looks like we are close to wrapping up the remaining items
> for
> > > an
> > > > > > > 0.5.0 release. There is one open PR that integrates the latest
> > FDS
> > > > > > > release into the UI which looks like it is close to getting in.
> > > Once
> > > > > > > that wraps up I think we can get an RC out. I'm happy to
> perform
> > RM
> > > > > > > duties.
> > > > > > >
> > > >
> > >
> >
> --
> Sent from Gmail Mobile
>

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Bryan Bende <bb...@gmail.com>]

There shouldn’t be... 0.5.0 shouldn’t be too much different than 0.4.0,
just a few improvements and a couple of fixes that NiFi needs from the
released registry artifacts.

Are you running NiFi 1.8 with registry 0.4?

On Sat, Aug 10, 2019 at 11:19 AM Mike Thomsen <mi...@gmail.com>
wrote:

> Are there any incompatibilities expected between this release and NiFi 1.8?
> We're not planning on upgrading until 1.10 at the earliest.
>
> Thanks,
>
> Mike
>
> On Sat, Aug 10, 2019 at 8:48 AM Denes Arvay <de...@apache.org> wrote:
>
> > There's an ongoing initiative to add Knox proxy support to NiFi Registry
> > [1]. It might involve Knox changes too [2], so I don't know how
> complicated
> > it is, but it'd be good if that could go to the release as well.
> >
> > [1] https://issues.apache.org/jira/browse/NIFIREG-295
> > [2] https://issues.apache.org/jira/browse/KNOX-1952
> >
> > Regards,
> > Denes
> >
> > On Sat, Aug 10, 2019 at 2:25 PM Kevin Doran <kd...@apache.org> wrote:
> >
> > > Thanks for kicking off this discussion thread, Bryan. I agree we are
> > > reaching a good point to start preparing a release candidate. I see a
> > > few PRs up, I'll go through those and if any are close will get them
> > > merged prior to a RC.
> > >
> > > If anyone else wants to submit a PR in the next week or so I am also
> > > happy to review them.
> > >
> > > On Fri, Aug 9, 2019 at 12:25 PM Bryan Bende <bb...@gmail.com> wrote:
> > > >
> > > > That would be a nice addition, although it doesn't look like anyone
> is
> > > > actively working on it.
> > > >
> > > > If someone is able to tackle it and get a PR up in the next week, I'd
> > > > be happy to review it.
> > > >
> > > > On Fri, Aug 9, 2019 at 12:07 PM Mark Bean <ma...@gmail.com>
> > wrote:
> > > > >
> > > > > I'd like to see NIFIREG-177 included in the next release. It seems
> > > like a
> > > > > fairly simple addition, but I have not had time to dig in; I'm not
> > > familiar
> > > > > with modifying the UI. I hope someone knowledge of the UI could
> knock
> > > this
> > > > > out fairly quickly?
> > > > >
> > > > > [1] https://issues.apache.org/jira/browse/NIFIREG-177
> > > > >
> > > > >
> > > > > On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com>
> wrote:
> > > > >
> > > > > > It looks like we are close to wrapping up the remaining items for
> > an
> > > > > > 0.5.0 release. There is one open PR that integrates the latest
> FDS
> > > > > > release into the UI which looks like it is close to getting in.
> > Once
> > > > > > that wraps up I think we can get an RC out. I'm happy to perform
> RM
> > > > > > duties.
> > > > > >
> > >
> >
>
-- 
Sent from Gmail Mobile

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Mike Thomsen <mi...@gmail.com>]

Are there any incompatibilities expected between this release and NiFi 1.8?
We're not planning on upgrading until 1.10 at the earliest.

Thanks,

Mike

On Sat, Aug 10, 2019 at 8:48 AM Denes Arvay <de...@apache.org> wrote:

> There's an ongoing initiative to add Knox proxy support to NiFi Registry
> [1]. It might involve Knox changes too [2], so I don't know how complicated
> it is, but it'd be good if that could go to the release as well.
>
> [1] https://issues.apache.org/jira/browse/NIFIREG-295
> [2] https://issues.apache.org/jira/browse/KNOX-1952
>
> Regards,
> Denes
>
> On Sat, Aug 10, 2019 at 2:25 PM Kevin Doran <kd...@apache.org> wrote:
>
> > Thanks for kicking off this discussion thread, Bryan. I agree we are
> > reaching a good point to start preparing a release candidate. I see a
> > few PRs up, I'll go through those and if any are close will get them
> > merged prior to a RC.
> >
> > If anyone else wants to submit a PR in the next week or so I am also
> > happy to review them.
> >
> > On Fri, Aug 9, 2019 at 12:25 PM Bryan Bende <bb...@gmail.com> wrote:
> > >
> > > That would be a nice addition, although it doesn't look like anyone is
> > > actively working on it.
> > >
> > > If someone is able to tackle it and get a PR up in the next week, I'd
> > > be happy to review it.
> > >
> > > On Fri, Aug 9, 2019 at 12:07 PM Mark Bean <ma...@gmail.com>
> wrote:
> > > >
> > > > I'd like to see NIFIREG-177 included in the next release. It seems
> > like a
> > > > fairly simple addition, but I have not had time to dig in; I'm not
> > familiar
> > > > with modifying the UI. I hope someone knowledge of the UI could knock
> > this
> > > > out fairly quickly?
> > > >
> > > > [1] https://issues.apache.org/jira/browse/NIFIREG-177
> > > >
> > > >
> > > > On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com> wrote:
> > > >
> > > > > It looks like we are close to wrapping up the remaining items for
> an
> > > > > 0.5.0 release. There is one open PR that integrates the latest FDS
> > > > > release into the UI which looks like it is close to getting in.
> Once
> > > > > that wraps up I think we can get an RC out. I'm happy to perform RM
> > > > > duties.
> > > > >
> >
>

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Denes Arvay <de...@apache.org>]

There's an ongoing initiative to add Knox proxy support to NiFi Registry
[1]. It might involve Knox changes too [2], so I don't know how complicated
it is, but it'd be good if that could go to the release as well.

[1] https://issues.apache.org/jira/browse/NIFIREG-295
[2] https://issues.apache.org/jira/browse/KNOX-1952

Regards,
Denes

On Sat, Aug 10, 2019 at 2:25 PM Kevin Doran <kd...@apache.org> wrote:

> Thanks for kicking off this discussion thread, Bryan. I agree we are
> reaching a good point to start preparing a release candidate. I see a
> few PRs up, I'll go through those and if any are close will get them
> merged prior to a RC.
>
> If anyone else wants to submit a PR in the next week or so I am also
> happy to review them.
>
> On Fri, Aug 9, 2019 at 12:25 PM Bryan Bende <bb...@gmail.com> wrote:
> >
> > That would be a nice addition, although it doesn't look like anyone is
> > actively working on it.
> >
> > If someone is able to tackle it and get a PR up in the next week, I'd
> > be happy to review it.
> >
> > On Fri, Aug 9, 2019 at 12:07 PM Mark Bean <ma...@gmail.com> wrote:
> > >
> > > I'd like to see NIFIREG-177 included in the next release. It seems
> like a
> > > fairly simple addition, but I have not had time to dig in; I'm not
> familiar
> > > with modifying the UI. I hope someone knowledge of the UI could knock
> this
> > > out fairly quickly?
> > >
> > > [1] https://issues.apache.org/jira/browse/NIFIREG-177
> > >
> > >
> > > On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com> wrote:
> > >
> > > > It looks like we are close to wrapping up the remaining items for an
> > > > 0.5.0 release. There is one open PR that integrates the latest FDS
> > > > release into the UI which looks like it is close to getting in. Once
> > > > that wraps up I think we can get an RC out. I'm happy to perform RM
> > > > duties.
> > > >
>

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Kevin Doran <kd...@apache.org>]

Thanks for kicking off this discussion thread, Bryan. I agree we are
reaching a good point to start preparing a release candidate. I see a
few PRs up, I'll go through those and if any are close will get them
merged prior to a RC.

If anyone else wants to submit a PR in the next week or so I am also
happy to review them.

On Fri, Aug 9, 2019 at 12:25 PM Bryan Bende <bb...@gmail.com> wrote:
>
> That would be a nice addition, although it doesn't look like anyone is
> actively working on it.
>
> If someone is able to tackle it and get a PR up in the next week, I'd
> be happy to review it.
>
> On Fri, Aug 9, 2019 at 12:07 PM Mark Bean <ma...@gmail.com> wrote:
> >
> > I'd like to see NIFIREG-177 included in the next release. It seems like a
> > fairly simple addition, but I have not had time to dig in; I'm not familiar
> > with modifying the UI. I hope someone knowledge of the UI could knock this
> > out fairly quickly?
> >
> > [1] https://issues.apache.org/jira/browse/NIFIREG-177
> >
> >
> > On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com> wrote:
> >
> > > It looks like we are close to wrapping up the remaining items for an
> > > 0.5.0 release. There is one open PR that integrates the latest FDS
> > > release into the UI which looks like it is close to getting in. Once
> > > that wraps up I think we can get an RC out. I'm happy to perform RM
> > > duties.
> > >

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Bryan Bende <bb...@gmail.com>]

That would be a nice addition, although it doesn't look like anyone is
actively working on it.

If someone is able to tackle it and get a PR up in the next week, I'd
be happy to review it.

On Fri, Aug 9, 2019 at 12:07 PM Mark Bean <ma...@gmail.com> wrote:
>
> I'd like to see NIFIREG-177 included in the next release. It seems like a
> fairly simple addition, but I have not had time to dig in; I'm not familiar
> with modifying the UI. I hope someone knowledge of the UI could knock this
> out fairly quickly?
>
> [1] https://issues.apache.org/jira/browse/NIFIREG-177
>
>
> On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com> wrote:
>
> > It looks like we are close to wrapping up the remaining items for an
> > 0.5.0 release. There is one open PR that integrates the latest FDS
> > release into the UI which looks like it is close to getting in. Once
> > that wraps up I think we can get an RC out. I'm happy to perform RM
> > duties.
> >

Re: [DISCUSS] NiFi Registry 0.5.0 release

[Mark Bean <ma...@gmail.com>]

I'd like to see NIFIREG-177 included in the next release. It seems like a
fairly simple addition, but I have not had time to dig in; I'm not familiar
with modifying the UI. I hope someone knowledge of the UI could knock this
out fairly quickly?

[1] https://issues.apache.org/jira/browse/NIFIREG-177


On Thu, Aug 8, 2019 at 7:01 PM Bryan Bende <bb...@gmail.com> wrote:

> It looks like we are close to wrapping up the remaining items for an
> 0.5.0 release. There is one open PR that integrates the latest FDS
> release into the UI which looks like it is close to getting in. Once
> that wraps up I think we can get an RC out. I'm happy to perform RM
> duties.
>